No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2026-95745
A vulnerability in the API of HPE Networking Fabric Composer could allow an unauthenticated remote attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to cause the management services to become unavailable.
-
CVE-2026-95726
A buffer overflow vulnerability in HPE Networking VIA could allow an unauthenticated remote attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to interrupt the normal operation of the affected client.
-
CVE-2026-95747
A privilege escalation vulnerability exists in the SSH interface of HPE Networking Fabric Composer which could allow an authenticated low-privileged attacker to exceed their authorized level of access, if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to gain unauthorized access to internal services of the affected system.
-
CVE-2026-95748
A SQL injection vulnerability exists in HPE Networking Fabric Composer. Successful exploitation could allow an unauthenticated adjacent attacker to run arbitrary database commands.
-
CVE-2026-79883
A buffer overflow vulnerability in the PAPI protocol of HPE Networking AOS-10 could allow an unauthenticated adjacent attacker to access sensitive information. Successful exploitation could allow an attacker to retrieve information which could be used to potentially gain further access to network services supported by AOS-10, and to interrupt the normal operation of the affected service.
-
CVE-2026-95790
A vulnerability in the web-based management interface of network device management systems of AOS-8 Mobility Controllers could allow an authenticated remote attacker to bypass authorization controls. Successful exploitation could allow a low-privilege attacker to read sensitive configuration data potentially leading to unauthorized network access and further compromise of network security.
-
CVE-2026-40820
A high privileged remote attacker can exploit an unauthenticated SQL Injection vulnerability in the getVpnData function due to improper neutralization of special elements in a SQL SELECT command. This can result in a total loss of confidentiality.
-
CVE-2026-120976
On affected platforms running Arista EOS with IEEE 802.1X authentication and MACsec using dynamically derived keys, sensitive authentication information may be recorded in diagnostic data during a Smart Switch Upgrade (SSU). An attacker with administrative access on the device who obtains the affected diagnostic data could recover sensitive authentication information. This could potentially compromise the confidentiality and integrity of traffic protected by MACsec on the affected link. The vulnerability is only exposed during and after an SSU reload where an active 802.1X session used for MACsec is present.
-
CVE-2026-88709
Improper neutralization of special elements used in an OS command in certain ASUS Router firmware allows an user with physical access to insert a USB device containing a specially crafted directory name, potentially executing arbitrary commands with root privileges. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-98968
In the Linux kernel, the following vulnerability has been resolved: amt: send the relay's General Query directly from the receive path An skb queued in a qdisc can outlive the tunnel it references through a raw pointer in skb->cb. For example, with igmp_qrv set to 1 on the relay a tunnel lives for 135s, so a netem delay of 180s on the amt device outlives it; when the tunnel expires and is freed, the subsequent dequeue triggers a use-after-free in amt_dev_xmit(). BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20 Call Trace: amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262] dev_hard_start_xmit+0x22f/0x620 sch_direct_xmit+0x12e/0xac0 netem_dequeue+0x333/0xc50 net_tx_action+0x35c/0xa60 amt_send_igmp_gq() and amt_send_mld_gq() are only called from amt_request_handler(), inside the rcu_read_lock_bh() section of amt_rcv(). amt_request_handler() already has the tunnel the query is for: it found or created it inside that section. Queuing the query with dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the Ethernet header and calls amt_send_membership_query() for that tunnel. Make that call directly from the two senders instead, the same way amt_send_advertisement() transmits from the receive path. The query never waits in a qdisc, the tunnel is only dereferenced inside the RCU section that found or created it, and nothing is stored in skb->cb, so no lookup or refcount is needed. Remove the query branch of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no users left. Behaviour changes: - The relay's own General Queries no longer pass through the amt device's egress path: its qdisc, tc egress (clsact/tcx), the netfilter egress hook and packet taps. They are still visible as UDP on the underlay. - A query that is sent successfully is no longer counted as tx_dropped. The old query branch left through the unlock label, which counted every sent query as dropped. - A query that reaches amt_dev_xmit() on a relay from elsewhere, such as a userspace querier, is now dropped at the IGMP/MLD type switch. Before, it trusted whatever skb->cb held, and a NULL tunnel hit the WARN_ON(1).
-
CVE-2026-95727
A command injection vulnerability exists in HPE Networking VIA. Successful exploitation could allow an authenticated administrative user to execute arbitrary commands with elevated privileges on the underlying operating system.
-
CVE-2026-84729
Out-of-bounds write in certain ASUS Router firmware allow an unauthenticated nearby attacker to write data beyond the intended buffer or potentially cause a denial-of-service (DoS) via a crafted packet. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-105669
Argument injection in Ivanti Sentry before version 11.0, 10.8.3, and 10.7.4 allows a remote authenticated attacker with admin privileges to execute arbitrary on-disk binaries.
-
CVE-2026-107039
Insecure permissions in the ActivityMain component of M66B/Marcel Bokhorst NetGuard no-root firewall versionCode 2026080101/versionName 2.337 allows unauthorized attackers to arbitrarily force a device reset or Denial of Service (DoS).
-
CVE-2026-0331
An information disclosure vulnerability in Palo Alto Networks PAN-OS® software enables an unauthenticated remote attacker with network access to obtain sensitive firewall and session information by sending traffic to or through a dataplane interface. Panorama is not affected by this vulnerability.
-
CVE-2026-95753
A privilege escalation vulnerability exists in the API of HPE Networking Fabric Composer. Successful exploitation could allow an authenticated attacker with low privileges to disclose network traffic from switches managed by Fabric Composer.
-
CVE-2026-103410
An Integer Overflow vulnerability in the DPI certificate scanner in Juniper Networks Session Smart Router allows an unauthenticated remote attacker to cause a denial of service via a specially crafted TLS server certificate.
-
CVE-2026-121530
A improper authentication vulnerability in Fortinet FortiOS 7.6.0 through 7.6.6 may allow a remote authenticated attacker to gain improper access control via an invalid token after entering a valid username and password
-
CVE-2026-93458
Insertion of sensitive information into sent data in certain ASUS Router firmware allows a remote attacker to obtain router’s UID or login authorization tokens for the victim's linked account via a crafted web page, which requires a logged-in router administrator to actively complete the third-party authorization flow. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-19399
Improper Authentication and Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') in ASUS Router firmware allow an unauthenticated nearby user to perform file operations or read files in an unintended directory via crafted HTTP requests during an active user session. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-133730
A flaw was found in dnsmasq, where a memory handling issue exists in its Dynamic Host Configuration Protocol for IPv6 (DHCPv6) relay processing. A remote attacker can exploit this vulnerability by sending a sequence of network packets to a system configured as a DHCPv6 relay. This causes the service to write data to previously freed memory and crash, resulting in a Denial of Service (DoS).
-
CVE-2026-106174
A improper locking vulnerability in Fortinet FortiOS 8.0.0, FortiOS 7.6.4 through 7.6.6 may allow an unauthenticated attacker with network access to the device to cause a denial of service of the HTTPS management interface via crafted HTTP requests.
-
CVE-2026-72756
Routinator exits when an rsync URI for a file obtained over RRDP contains a path that cannot be stored on disk, such as too long file names, and folder names that overlap with existing file names.
-
CVE-2026-72758
When parsing an AS range in Routinator, if the maximum value of the range is smaller than the minimum value of the range, Routinator will never reach the maximum value and run out of memory.
-
CVE-2026-72754
When Routinator encounters a CRL with many entries, it may hang or run out of memory. If Routinator encounters a CRL file with the wrong encoding, it may exit.
-
CVE-2026-75775
Improper Neutralization of Special Elements used in an OS Command in certain ASUS routers allows remote user to execute arbitrary commands with root privileges via crafted parameters sent to the router while the device is in its factory-default state.Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-110464
Missing authorization in ASUS Armoury Crate allows a local attacker to write content into a specific file or registry location with Local System privileges, or to cause a recoverable system crash, via the service's exposed inter-process interface. Refer to the ' Security Update for Armoury Crate App ' section on the ASUS Security Advisory for more information.
-
CVE-2026-97350
Securepoint SSL VPN Client v2 on Windows contains vulnerabilities in the handling of OpenVPN configurations and proxy settings that allow non-privileged local users to influence operations performed with NT AUTHORITY\SYSTEM privileges. Two attack vectors have been identified: * Improper authorization of configuration checksum updates: The privileged service does not properly validate the authorization of connecting clients when updating the checksum of an OpenVPN configuration. This allows a non-privileged local user to modify an OpenVPN configuration and set a valid checksum without administrator privileges. The modified configuration is subsequently processed with NT AUTHORITY\SYSTEM privileges. * Argument injection via proxy settings: The client does not properly validate or sanitize proxy settings before passing them as arguments to OpenVPN. A non-privileged local user can inject additional arguments through the proxy settings, influencing the execution of OpenVPN with NT AUTHORITY\SYSTEM privileges. This attack vector does not require direct communication with the privileged service or modification of the protected OpenVPN configuration.
-
CVE-2026-111730
P-Net before 1.0.3 does not validate the LengthPeerStationName field of a CheckPeers block in get_check_peer(). The received length (up to 255) was used to copy data into the 241-byte peer station name buffer and to place the terminating NUL byte, so a crafted block writes up to 15 bytes past the end of the buffer. This can lead to a crash (denial of service) or potentially arbitrary code execution. Requires establishment of session that needs ADJACENT network access.
-
CVE-2026-121944
sngrep through 1.9.0 contains an infinite loop vulnerability in capture_packet_reasm_ip() in src/capture.c that allows attackers to cause denial of service via crafted NFLOG TLVs. Attackers can supply a pcap file with link type NFLOG containing a non-payload TLV with length under 4, making the capture thread spin at full CPU and stop processing packets.
-
CVE-2026-109594
Post-authentication Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability has been identified in the End-of-Life SonicWall GMS 9.5.2 and earlier versions which in specific conditions could potentially allow an authenticated attacker to access or modify information stored in the GMS database.
-
CVE-2026-95755
Improper certificate validation vulnerabilities in the affected interface of HPE Networking Fabric Composer could allow an unauthenticated adjacent attacker to intercept management traffic if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to obtain sensitive information.
-
CVE-2026-123180
A missing authentication vulnerability in the listed NETGEAR RAX models allows an network adjacent attacker who has authenticated to wifi network to obtain sensitive information and tamper with device configuration, including administrator credentials, without authenticating to the device. This affects the confidentiality, integrity and availability of the router.
-
CVE-2026-99081
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix DMA mapping length for padded small packets Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412 NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces: DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000 [fault reason 0x06] PTE Read access is not set bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001 ... NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out The fault address (0xfc499000) is on an exact 4KB page boundary, pointing to a DMA read buffer overrun. In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes), such as 42-byte untagged ARP frames, are padded: if (length < BNXT_MIN_PKT_SIZE) { pad = BNXT_MIN_PKT_SIZE - length; if (skb_pad(skb, pad)) goto tx_kick_pending; length = BNXT_MIN_PKT_SIZE; } mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); ... dma_unmap_len_set(tx_buf, len, len); However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes) and is left unadjusted after padding. Consequently, dma_map_single() and dma_unmap_len_set() map and track only 42 bytes. Later, the hardware TX buffer descriptor is programmed with the padded length: txbd->tx_bd_len_flags_type = cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags | TX_BD_FLAGS_PACKET_END); The NIC DMA engine is thus instructed to read 52 bytes from a region where only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB page (within 'pad' bytes of the next page), the hardware DMA read overruns into the unmapped adjacent page, triggering an IOMMU fault. This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic and races when toggling HW VLAN offload") because reserving extra VLAN headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data offsets and potentially causing small frames to land right against page boundaries. Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled, because padding might linearize the skb. This ensures skb->len and skb_headlen(skb) reflect the padded size so that dma_map_single() maps the full buffer and the descriptor length is consistent. This also removes the temporary 'pad' variable and masking logic. The padding is done after the SW USO branch, otherwise bnxt_sw_udp_gso_xmit() would account the padding as UDP payload and send it in extra segments. Note that SW USO segments are still not padded: with IPv4, a segment carrying less than 10 bytes of UDP payload (small gso_size, or a short last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE. This is a separate issue, left for a followup patch.
-
CVE-2026-111734
P-Net before 1.0.3 does not validate the length of a received Ethernet frame in pf_eth_recv() before reading the EtherType, any VLAN tags and the PROFINET FrameID. The VLAN tag loop had no upper bound, so a truncated frame, or a frame consisting only of VLAN tags, makes the function read past the end of the receive buffer. This can cause a crash (denial of service) or disclose memory content.
-
CVE-2026-105813
Cleartext storage of sensitive information in Ivanti UWM before version 2026.4 allows a local authenticated attacker to retrieve another local user's session token.
-
CVE-2026-109822
Yamaha wireless LAN router NWR100 provided by Yamaha Corporation contains an issue with insecure storage of sensitive information. Configuration files generated by the CONFIG file export function may be read by an unauthenticated attacker.
-
CVE-2026-116236
A vulnerability has been found in Oray Pugongying X5 Pro 7.6.1. Affected by this issue is the function plugin_init of the file /tmp/upload_files of the component PPPoE WAN Setting Handler. Such manipulation of the argument pppd_options leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-90464
An external control of file path vulnerability in a WatchGuard Fireware OS firewall diagnostic command allows a remote, authenticated attacker with at least read-only (Device Monitor) privileges and access to the management CLI to create, truncate, or overwrite arbitrary files and modify kernel parameters with root privileges by submitting a specially crafted command. Written content is limited to numeric values.
-
CVE-2026-93862
An out-of-bounds read vulnerability in the FireCluster Sync processing allows an attacker positioned on the cluster interconnect, such as a compromised cluster peer or an on-path network attacker, to repeatedly crash the firewall's cluster synchronization process by sending specially crafted network traffic, resulting in a sustained denial of service.
-
CVE-2026-79895
Vulnerabilities in the affected interface of AOS-10 could allow an unauthenticated remote attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to disrupt the availability of the affected interface.
-
CVE-2026-103411
An Integer Underflow vulnerability in DhcpMessageDecoder in Juniper Networks Session Smart Router allows an attacker with local network access to cause information disclosure and a denial of service via a malicious DHCP reply.
-
CVE-2026-0330
A remote code execution (RCE) vulnerability in Palo Alto Networks PAN-OS® software on Panorama enables an authenticated administrator with network access to execute arbitrary code with root privileges. The security risk posed by this issue is significantly minimized by restricting access to the management interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . Cloud NGFW, Prisma® Access, and standalone PAN-OS firewalls are not affected by this vulnerability.
-
CVE-2026-121526
A url redirection to untrusted site ('open redirect') vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an unauthenticated attacker to perform an open redirect attack via crafted HTTP requests.
-
CVE-2026-93864
A link following vulnerability in WatchGuard Fireware OS’s firewall daemon allows a local attacker with code execution as a low-privileged system process to overwrite arbitrary files with root privileges, and to tamper with firewall IP set data, by planting a crafted file system object and triggering a list update. Written content is partially constrained.
-
CVE-2026-130468
NBAP protocol dissector crash in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service
-
CVE-2026-133495
A weakness has been identified in D-Link DIR-600L 2.17b02. Affected by this issue is some unknown functionality of the file hedwig.cgi of the component fatlady Handler. Executing a manipulation can lead to path traversal. The attack may be launched remotely.
-
CVE-2013-20008
Linksys WAG200G through 1.01.06 contains a weak password change mechanism that allows attackers to change the administrator password without supplying the current password. Attackers with access to an authenticated administrator browser session can set a new password to lock out the legitimate administrator and take persistent device control.
-
CVE-2026-95729
A sensitive information disclosure vulnerability exists in HPE Networking VIA. Successful exploitation could allow an authenticated attacker to obtain sensitive information.
-
CVE-2026-95730
A buffer overflow vulnerability exists in HPE Networking VIA that could allow an authenticated low-privileged local user to cause a denial of service. Successful exploitation could allow an attacker to interrupt the normal operation of the affected system.
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.