No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2026-120387
An improper JWT signature verification vulnerability in CIRCUTOR PowerStudio SCADA WAVE desktop version allows an unauthenticated remote attacker to bypass authentication by submitting an unsigned JWT with the algorithm set to “none”. The shared JWT validation component accepts the token without verifying a cryptographic signature, allowing the attacker to impersonate another user and access protected functionality with that user's privileges.
-
CVE-2026-130801
The device's command parser does not require asymmetric cryptographic signatures to validate incoming APDU packets. This enables an attacker to inject forged, unauthorized commands to manipulate device features and configurations once the initial handshake is bypassed.
-
CVE-2026-122147
ICRTouch PocketTouch version 1.700 build 2025.3726 defines hard-coded default values for multiple credential fields, including a socket password and configuration and shutdown passwords. An additional email-related password field is initialized without a value.
-
CVE-2026-122055
ICRTouch PocketTouch version 1.700 build 2025.3726 contains a default socket password set to the literal value password. Where the default value remains unchanged and is accepted by a TouchPoint POS terminal, an attacker with network access to the terminal’s socket service may authenticate using publicly known credentials.
-
CVE-2026-74911
Software installed and run as a non-privileged user may conduct improper GPU system calls to the execution of an error path that triggers an OOB read & write. An error can be triggered which causes the index of the array element to be cleaned up by the error path would be outside of the array bounds.
-
CVE-2026-13312
A vulnerability that could allow an attacker to compromise a system.
-
CVE-2026-97888
The embedded HTTP server does not clear the security identity established during a request before its worker thread handles the next request. A remote unauthenticated attacker can have their request processed with the identity of a previously authenticated user, gaining that user's privileges. Only applications served by the embedded HTTP server that authenticate programmatically or via basic authentication are affected. Users are recommended to block network access to the embedded HTTP server from untrusted clients, or to migrate to the Tomcat based TomEE distributions.
-
CVE-2026-111256
When JAX-WS or JAX-RS endpoints are published by the embedded OpenEJB HTTP server rather than Tomcat, some configured authentication methods are silently ignored and the endpoint is published without authentication. A remote unauthenticated attacker can invoke the exposed operations without credentials. Only deployments that use the embedded HTTP server and rely on such an authentication method are affected. Users are recommended to block network access to the embedded HTTP server from untrusted clients, or to migrate to the Tomcat based TomEE distributions.
-
CVE-2026-111250
The embedded OpenEJB HTTP server reports every request as authenticated when an application requests authentication programmatically. A remote unauthenticated attacker can access functionality protected this way. Only applications served by the embedded HTTP server that rely on programmatic authentication are affected. Users are recommended to block network access to the embedded HTTP server from untrusted clients, or to migrate to the Tomcat based TomEE distributions.
-
CVE-2026-121686
FrodoBots EarthRover Mini+ firmware (version 6.2.4_6.2.5_0.614.0) is vulnerable to unauthenticated, remote code execution via MQTT. A firmware method accepts arbitrary shell commands delivered via Amazon Web Services Internet of Things Message Queuing Telemetry Transport (AWS IoT MQTT) messages and executes them as root. Access is gated only by shared Internet of Things (IoT) credentials, with no per‑device authentication, enabling remote code execution as root across the fleet.
-
CVE-2026-121685
FrodoBots EarthRover Mini+ firmware (version 6.2.4_6.2.5_0.614.0) contains multiple sets of hard-coded credentials. These include fleet‑wide credentials, including BasicAuth credentials for an Agora token service, AWS IAM access keys, AWS IoT MQTT credentials, and a Slack incoming webhook URL. These credentials are embedded directly in frodobot.bin and are accessible through static analysis of the publicly downloadable firmware. Extraction requires no special privileges.
-
CVE-2026-121687
FrodoBots EarthRover Mini+ firmware (version 6.2.4_6.2.5_0.614.0) contains several local interfaces that are exposed without authentication. 1. HTTP REST API (port 80): motor control, telemetry/GPS/IMEI, plaintext WiFi password (GET /api/v1/wifi/status), join-arbitrary-WiFi, diagnostic export. 2. ADB (Android Debug Bridge, port 5555) access to root shell 3. SSH (port 22)
-
CVE-2026-95377
OS command injection in the TFTP provisioning module of Zenitel EdgeAudioClient before 9.6.3.0, and 10.x before 10.1.3.0, on VSFF6, VSFF8, VSFF8MP, VSFF8MN, and VSFT devices allows unauthenticated adjacent attackers to execute arbitrary commands as root via a crafted DHCP option 66 (TFTP Server Name) value supplied by a rogue DHCP server on the same network segment. The DHCP-supplied value is passed to a shell without sanitization. Devices using DHCP, the default configuration, are affected on every boot and lease renewal. The same injection is also reachable via the config_update_tftp_server and sw_update_tftp_server configuration fields by an attacker able to modify the device configuration.
-
CVE-2026-111490
Insecure direct object reference (IDOR) vulnerability in the MatchPoint API, which relies on the `actingasuser` HTTP header without verifying the requester's authorization for the specified user. Manipulation of sequential identifiers allows access to personal, banking, and financial data, private messages, and QR codes for physical access, as well as the ability to modify third-party accounts, change passwords, impersonate users, and transfer virtual balances.
-
CVE-2026-111489
A static credential embedded in the mobile app has been reported to return the 'autorizado' token on the MatchPoint platform. The report states that this token grants unauthenticated access to API services.
-
CVE-2026-130802
The NFC authentication handshake relies on a fixed, static challenge instead of a unique, random value for every session. This allows an attacker to perform a "replay attack," successfully authenticating by simply sending the same pre-recorded response.
-
CVE-2026-122149
The PocketTouch and TouchPoint POS protocol includes a `SAVECONFIG` command that appears capable of overwriting till configuration files remotely. An attacker with network access to the POS socket service may be able to submit a crafted `SAVECONFIG` command and replace or modify terminal configuration data.
-
CVE-2026-129261
A vulnerability was found in Kingston FURY CTRL RGB Control Software up to 2.0.66.0. The impacted element is an unknown function in the library NTIOLib_X64.sys of the component IOCTL Handler. Performing a manipulation results in exposed ioctl with insufficient access control. The attack is only possible with local access.
-
CVE-2026-33971
In the LTE RRC component, improper handling of messages before authentication triggers a data abort, which leads to a denial‑of‑service condition.
-
CVE-2026-33972
In the Exynos modem's IMS stack, Out of Bound access occurs due to improper validation.
-
CVE-2026-48174
In the NR RRC component, improper handling of messages before authentication triggers a data abort, which leads to a denial‑of‑service condition.
-
CVE-2026-69050
Out-of-bounds memory access in a device driver due to improper resource state tracking.
-
CVE-2026-68991
In the Samsung Exynos ENN NeuralNetworks HAL, improper input validation during request processing can cause memory corruption and lead to a denial of service condition.
-
CVE-2026-48173
In the NAS message handler, improper validation of the length field in NAS message causes memory corruption
-
CVE-2026-102166
Arista C-260 and C-250 access points ship with fleet-wide static cryptographic keys used for firmware image verification and SSLP authentication. An attacker who is able to access these keys would be able to create modified firmware that will pass verification checks. This vulnerability is specific to the C-260 and C-250 models; other access point models enforce digitally signed upgrade images with secure boot and are not affected by this issue.
-
CVE-2026-39430
On HP Poly EagleEye Cube USB 1.3.1-001267 devices, the administrator authentication flow is broken: session management and access controls are not enforced device-side. Thus, an unauthenticated user can change administrator-level settings (without logging in) via a modified client that bypasses the login step or via a custom client to make the underlying administrator API calls. This allows unauthenticated users to perform administrative actions too such as exporting configuration files that include the internal device credentials for the administrator user and other network systems.
-
CVE-2026-124005
XWEB EVO 4.3.0 through 5.8.8 contains a weak password generation vulnerability that allows remote attackers to derive the Administrator code-of-the-day password using only the device MAC address and date, with no server secret involved. Attackers can analyze the firmware binary xwpasswd, which itself functions as the password generator, to compute valid Administrator credentials offline and authenticate to the device without authorization. This product line reached it's end of service date in March 2026.
-
CVE-2026-123966
A vulnerability was determined in Tenda AC19 16.03.10.07. Affected by this issue is the function saveParentControlInfo of the file /goform/saveParentControlInfo. This manipulation of the argument deviceId causes heap-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.
-
CVE-2026-59104
UgCS server before 6.2 contains an authentication bypass in the HCI protocol login handler (LoginHandler) exposed on TCP port 3334. When the user database contains exactly one user (the default single-operator installation), a LoginRequest with empty userLogin and userPassword fields is interpreted as \"use the only user\" rather than as invalid credentials, and the server returns a fully authenticated session. Because the service listens on all interfaces (0.0.0.0) without TLS by default, an unauthenticated remote attacker with network access to port 3334 can obtain an authenticated session without knowing any credential and then issue privileged commands, including commanding connected drones and uploading flight routes.
-
CVE-2026-128908
OS command injection (CWE-78) in the network-configuration handling of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to execute arbitrary commands as root. Configuration values that can be written without authentication over the management interface are inserted unquoted into shell commands. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The injected command persists across reboots. Confirmed on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.
-
CVE-2026-121688
FrodoBots EarthRover Mini+ firmware (version 6.2.4_6.2.5_0.614.0) contains an insecure STM32 firmware update mechanism. The STM32 motor‑controller firmware is fetched over unencrypted HTTP. Integrity is validated only via MD5, with the hash provided in the same unprotected response. No code‑signing mechanism is implemented, allowing firmware to be replaced with potentially malicious code.
-
CVE-2026-122051
A flaw has been found in Edimax BR-6208AC 1.32. Affected by this vulnerability is an unknown functionality of the file /goform/mp. Executing a manipulation can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-119757
BTCPay Server before 2.4.2, including 2.4.2 release candidates, contains an information disclosure vulnerability that allows unauthenticated remote attackers to retrieve .macaroon credential files for an LND (Lightning Network Daemon) node. Attackers can use the exposed macaroon to gain full control of the LND node, including moving funds, resulting in theft of funds from affected deployments.
-
CVE-2026-128909
Improper verification of cryptographic signature (CWE-347) in the firmware update handler of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to install modified firmware, which gives persistent code execution as root. The device accepts any image that matches an MD5 checksum supplied in the same request and does not verify a signature. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. Reproduced by running the unmodified device binaries in emulation; not tested on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.
-
CVE-2026-21176
Unquoted search path or element in Samsung Device Care prior to version 4.0.80 allows local attackers to execute arbitrary code.
-
CVE-2026-21175
Incorrect permission assignment for critical resource in Samsung Update prior to version 3.0.111.0 allows local attackers to execute arbitrary code.
-
CVE-2025-43874
: Improper Neutralization of Special Elements used in an OS Command vulnerability in Johnson Controls iSTAR Ultra, Johnson Controls iSTAR Ultra SE, Johnson Controls iSTAR Ultra G2, Johnson Controls iSTAR Ultra G2 SE, and Johnson Controls iSTAR Edge G2 allows : OS Command Injection. This issue affects iSTAR Ultra: before 6.9.2.CU02; iSTAR Ultra SE: before 6.9.2.CU02; iSTAR Ultra G2: before 6.9.2.CU02; iSTAR Ultra G2 SE: before 6.9.2.CU02; iSTAR Edge G2: before 6.9.2.CU02.
-
CVE-2026-122013
A vulnerability was detected in Comfast CF-WR632AX 2.6.0.1. Affected by this vulnerability is an unknown functionality of the file /usr/bin/webmgnt of the component Multipart Parser. Performing a manipulation of the argument filename results in path traversal. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-8331
An unrestricted upload of files with dangerous type vulnerability in the Microchip TimePictra platform allows functionality not properly constrained by access control lists, potentially resulting in remote code execution.
-
CVE-2026-54378
VitaFit cloud API before 2026-10-30 contained a broken access control vulnerability that allows any authenticated user to obtain temporary AWS credentials by calling the POST /front/user/s3/token/ endpoint. Attackers can use these improperly scoped credentials to list the shared storage bucket and read or overwrite other users' stored files, enabling unauthorized cross-user data access and manipulation.
-
CVE-2026-8332
A hard-coded root password in Microchip TimePictra platform installation files could allow an attacker with access to those files to obtain privileged credentials
-
CVE-2026-122044
Philips Hue Bridge Pro Protection Mechanism Failure Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of Philips Hue Bridge Pro. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service, which listens on TCP port 443 by default. The issue results from the failure to apply a protection mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-33086.
-
CVE-2026-112354
Etrel INCH AC charging station management web interface prior to firmware versions 7.1.2 and 8.0.1 contains a hard-coded default credentials vulnerability that allows remote attackers to gain full Administrator access by authenticating with the factory-default account. Attackers can log in over cleartext HTTP to obtain complete charger configuration, OCPP ChargePoint Identity, and CSMS WebSocket connection details, enabling unauthorized administrative control of the charging station.
-
CVE-2022-29966
Emerson Ovation has several protocols that have no authentication, which could allow an attacker to change controller configuration or cause a denial-of-service condition.
-
CVE-2026-121606
A vulnerability has been found in Qihoo 360 D621-2, D603-2, D600-2, D619, D606-6 and D706 up to 6.4.9. Affected by this issue is the function verify_sign of the file fs2/bin/iscm of the component Firmware Signature Verification. Such manipulation of the argument sign leads to improper verification of cryptographic signature. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-106018
Authentication bypass using an alternate path or channel vulnerability in Johnson Controls EasyIO FW allows Authentication Bypass. This issue affects EasyIO FW: through 3.0b25.
-
CVE-2026-124008
XWEB EVO 5.2.3 through 5.8.8 contains an authenticated OS command injection vulnerability in the devices.lua template handling, which allows authenticated attackers to execute arbitrary commands by injecting unescaped template source into unzip and related shell commands. Attackers can exploit this flaw through the wlua interpreter to execute arbitrary commands with root privileges on the affected device. This product line reached it's end of service date in March 2026.
-
CVE-2026-124017
Phison E12 and E18 PCIe SSD controllers contain a Secure Boot bypass vulnerability that allows a privileged local attacker to inject persistent boot-patch tuples into the unsigned, CRC-protected flash ID page read by the BootROM. By overwriting a fuse-derived RAM variable via a crafted patch entry using Phison Vendor Specific Commands, an attacker can force CRC-only firmware verification instead of signature checking, enabling an unsigned firmware image to load and creating a persistent controller-level implant that survives firmware reinstallation and operates below the host operating system.
-
CVE-2026-131848
Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in TSnap7MicroClient::opReadMultiVars() that allows malicious PLCs to overflow client buffers via unchecked DataLength fields. Attackers controlling or impersonating a PLC can return crafted ReadVar responses to Cli_ReadMultiVars() callers, writing up to 65535 bytes per item to corrupt memory and crash clients.
-
CVE-2026-119726
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in PocketBook / Obreey Products PocketBook Reader (Android) allows Exposure of Sensitive Information to an Unauthorized Actor. This issue affects PocketBook Reader (Android): 5.65.0.39561.release (com.obreey.reader).
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.