No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2026-99070
In the Linux kernel, the following vulnerability has been resolved: ipv6: do not warn on route notification size race fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later fills it with rt6_fill_node(). With nexthop compatibility mode enabled, a concurrent replacement can grow the group between these independent snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so the warning does not prove a sizing bug. Remove the warning. The existing error path still frees the skb and reports the error to listeners.
-
CVE-2026-99049
In the Linux kernel, the following vulnerability has been resolved: gpio: xilinx: fix runtime PM leak on request error path pm_runtime_get_sync() leaves the usage counter incremented even when it fails, and xgpio_request() returns the error without dropping it. gpiolib does not call ->free() when ->request() fails, so xgpio_free(), which holds the only matching pm_runtime_put(), never runs. The reference is leaked and the controller can no longer runtime-suspend, so its clock stays enabled. Switch to pm_runtime_resume_and_get(), which only increments the usage counter on success.
-
CVE-2026-99041
In the Linux kernel, the following vulnerability has been resolved: ip6_gre: remove obsolete ERSPAN PMTU update A tc tunnel_key action can attach a METADATA_IP_TUNNEL dst to an skb, and mirred can redirect it to a native ip6erspan device. The legacy PMTU update in ip6erspan_tunnel_xmit() treats that metadata dst as a route. Since it has no output device, dst_dev(dst)->mtu dereferences NULL. On v7.2 with KASAN, an initial UID/GID 65534 process with CapEff 0 used self-created user and network namespaces to trigger: KASAN: null-ptr-deref RIP: ip6erspan_tunnel_xmit+0x10fc/0x2cc0 Kernel panic - not syncing: Fatal exception in interrupt The update is obsolete. Commit fe1a4ca0a2b7 ("ip6_gre: process toobig in a better way") changed IPv6 GRE Too Big handling to update the underlay route and removed the equivalent block from __gre6_xmit(). ip6_tnl_xmit() then propagates the underlay PMTU to the overlay route. Remove the stale ERSPAN copy and its now-unused dst variable. This eliminates the metadata-dst dereference and keeps ERSPAN aligned with IPv6 GRE PMTU handling.
-
CVE-2026-98954
In the Linux kernel, the following vulnerability has been resolved: net: always dissect GSO packets in __virtio_net_hdr_to_skb() Commit 9e8db5913264 ("net: avoid false positives in untrusted gso validation") added a '&& skb->network_header' check before flow-dissecting GSO packets without VIRTIO_NET_HDR_F_NEEDS_CSUM in __virtio_net_hdr_to_skb(), because some callers (such as tun_get_user(), tun_xdp_one(), virtnet_receive_done(), and raw_verify_header()) called virtio_net_hdr_*_to_skb() before initializing skb->network_header and skb->dev. Because __alloc_skb() and __build_skb_around() zero-initialize skb->network_header to 0 (unlike mac_header and transport_header which are initialized to ~0U), those four callers always had skb->network_header == 0 and bypassed flow dissection in __virtio_net_hdr_to_skb(). More generally, skb->network_header is an offset from skb->head (where 0 is also a valid offset whenever skb_headroom(skb) is 0), not a boolean flag. Whenever the 'if (gso_type && skb->network_header)' branch was skipped, the fallback 'else if (gso_type)' only pulled nh_min_len + thlen (40 bytes for TCPv4) without dissecting the packet, without validating ip_proto or n_proto, and without setting skb->transport_header. If the packet has a malformed network header, it is not rejected and a subsequent skb_probe_transport_header() also fails, leaving skb->transport_header at ~0U (0xffff). Similarly, if an IPv4 packet carries IP options (ihl > 5) or an IPv6 packet carries extension headers, pulling only nh_min_len + thlen can leave the TCP header outside skb->head. In both cases, tcp_hdrlen(skb) in skb_gso_transport_seglen() reads out-of-bounds: BUG: KASAN: slab-out-of-bounds in skb_gso_transport_seglen Read of size 2 by task poc/133 skb_gso_transport_seglen (net/core/gso.c:155) skb_gso_validate_mac_len (net/core/gso.c:270) tbf_enqueue (net/sched/sch_tbf.c:260) dev_qdisc_enqueue (net/core/dev.c:4227) __dev_queue_xmit (net/core/dev.c:4884) In addition, checking virtio_net_hdr_match_proto() only inside 'if (!skb->protocol)' before flow dissection both skipped validation when skb->protocol was pre-set by the caller and rejected VLAN-tagged frames whose outer L2 protocol is ETH_P_8021Q or ETH_P_8021AD. Fix this by: 1. Initializing skb->dev and skb->network_header (plus skb->protocol for IFF_TUN) before virtio_net_hdr_*_to_skb() in tun_get_user(), tun_xdp_one(), virtnet_receive_done(), and raw_verify_header(). In tun_get_user(), drop the redundant skb_reset_mac_header(skb) in the IFF_TUN case since __virtio_net_hdr_to_skb() unconditionally resets mac_header. 2. Removing '&& skb->network_header' and the unvalidated 'else if (gso_type)' fallback in __virtio_net_hdr_to_skb() so all GSO packets without VIRTIO_NET_HDR_F_NEEDS_CSUM are flow-dissected, have their transport header pulled into linear data, and have skb->transport_header set. 3. Moving the virtio_net_hdr_match_proto() check to after skb_flow_dissect_flow_keys_basic(), validating keys.basic.n_proto against hdr_gso_type.
-
CVE-2026-98956
In the Linux kernel, the following vulnerability has been resolved: ASoC: adau1372: allow sleepy powerdown GPIOs gpiod_set_value() emits a WARN when the GPIO provider indicates that it can sleep, as is typical for I2C controlled GPIO expanders. Since the powerdown GPIO is only manipulated in process context, use the _cansleep variant instead. This lets the driver use sleepy GPIOs to power off the chip.
-
CVE-2026-98940
In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: lpass-cpu: use DAI table index for playback constraints The DAI ID is a hardware port ID and is not necessarily the index of the corresponding entry in variant->dai_driver. When configuring a DAI with LPAIF_I2SCTL_MODE_QUAD01, the probe code currently uses dai_id to index variant->dai_driver. This is incorrect for platforms where DAI IDs are sparse. For example, the IPQ806x MI2S DAI has ID 4 while it is the only entry in the DAI driver table. If that DAI is configured for QUAD01 and probe reaches this branch, the code writes beyond that single entry via dai_driver[4] instead of updating the DAI being processed. Use the loop index i when updating the current DAI's playback channel constraints, while retaining dai_id for indexing the hardware-port specific playback SD-line mode array. This fixes the incorrect DAI table access for platforms where the DAI ID does not match its position in the driver table.
-
CVE-2026-98931
In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix NULL pointer dereference with no ECC engine When "nand-no-ecc-engine" is set in DT, nanddev_get_ecc_engine() takes the NAND_ECC_ENGINE_TYPE_NONE path and returns success while leaving nand->ecc.engine NULL. The SPI-NAND code nevertheless dereferences it unconditionally to test for a pipelined engine, so probing such a device oopses immediately. Rather than open-coding the test three times, add a nand_ecc_is_pipelined() helper to the NAND core that folds the NULL check into the integration comparison, and use it everywhere. Future callers then cannot reintroduce the problem.
-
CVE-2026-99062
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: account only unread bytes in read_skb() After a partial stream receive, rx_bytes tracks the unread suffix while buf_used and peer credit still cover the whole packet. virtio_transport_read_skb() dequeues that packet but passes pkt_len for both counters, underflowing rx_bytes. On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read from a 100-byte packet made SIOCINQ report -40, an empty recv return ELOOP, and poll report the empty socket readable. After verdict detach, receiving 40 bytes wrapped the counter to zero and hid those queued bytes until one more byte arrived. The fixed run kept the counter balanced and exposed all queued data immediately. This was found during an LLM-assisted manual source audit of VSOCK receive accounting while re-evaluating virtio_transport_read_skb() after CVE-2024-50169. Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the full packet length for buf_used and peer credit.
-
CVE-2026-99069
In the Linux kernel, the following vulnerability has been resolved: Input: ati_remote2 - fix type confusion in device attribute handlers Previously, the channel_mask and mode_mask attributes were registered on the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b ("Input: ati-remote2 - use driver core to instantiate device attributes") converted the driver to let the driver core manage them via dev_groups in struct usb_driver, the attributes moved to the bound usb_interface devices, but the show and store callbacks were not updated accordingly. As a result, the callbacks still invoked to_usb_device() on a device pointer belonging to a struct usb_interface, producing an invalid usb_device pointer. Use to_usb_interface() directly in the attribute handlers to obtain the interface and its driver data.
-
CVE-2026-99055
In the Linux kernel, the following vulnerability has been resolved: tcp: reject net_iov in zerocopy receive mapping hints After copying a readable prefix, receive_fallback_to_copy() asks tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the next skb is unreadable, find_next_mappable_frag() passes its net_iov fragment to can_map_frag(). skb_frag_page() returns NULL for a net_iov, but can_map_frag() dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF fragment reported: BUG: KASAN: null-ptr-deref in can_map_frag tcp_zerocopy_receive -> can_map_frag Kernel panic - not syncing: KASAN: panic_on_warn set The diagnostic inserted the net_iov directly because the test host has no devmem-capable NIC. Hardware end-to-end reachability remains untested and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue. Reject all net_iov fragments before skb_frag_page(). This covers both DMABUF and IOURING net_iov types while leaving page-backed checks unchanged. With the guard, the same queue copied the readable prefix, returned a 4096-byte skip hint, and completed without a fault.
-
CVE-2026-99060
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7603: initialize global station WCID mt7603 uses a driver-private global station WCID for frames that have neither a station nor a vif, including frames injected through a monitor interface. Unlike the core global WCID initialized by mt76_register_device(), this WCID is published without ever being passed to mt76_wcid_init(). Since commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status"), mt76_tx() queues every such frame on the WCID's tx_pending or tx_offchannel queue and links its tx_list. The first injected frame therefore reaches __skb_queue_tail() with an uninitialized sk_buff_head and dereferences a NULL prev pointer. Initialize the WCID before publishing it. The fix was tested on an MT7603 PCIe device. Three wildcard probe requests were injected through a monitor interface. The hardware queue head and tail advanced from 0 to 3 and a second radio captured the third request over the air. No oops or reset occurred. After restoring AP mode, a 150 MB transfer also completed without a reset.
-
CVE-2026-99028
In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop In the dmaengine path the driver pre-submits RX buffers and holds in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync() aborts these descriptors without running their callbacks, and the driver then frees only the ring shells, leaking every SKB still owned by the engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted per channel, the mapping leak can eventually exhaust a limited IOMMU aperture. Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a slot that still owns a live, DMA-mapped buffer, and on stop unmap and free every such buffer. axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on each completion, so it can race axienet_stop(): a completion may submit a fresh buffer after dmaengine_terminate_sync() has returned, leaving the channel armed with a buffer the teardown then frees while the engine may still write into it (dma_release_channel() does not stop it either). Add a lock that axienet_dma_rx_cb() holds across the @stopping check and the resubmit, and axienet_stop() holds to set @stopping before terminating. Once @stopping is set no callback can arm a new buffer, and any armed just before is aborted by the terminate, so teardown only frees buffers the engine no longer owns.
-
CVE-2026-99020
In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4 The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two entries, covering selectors 0x00-0x45. The linear range helpers loop over n_linear_ranges entries, so any lookup of a selector above 0x45 reads past the end of the array and treats whatever follows it as two more ranges. This happens on the normal registration path when the core checks the voltage constraints against every selector. TPS652G1 uses the same descriptors and is affected too. Use ARRAY_SIZE() so the count always matches the table.
-
CVE-2026-99003
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate userspace queue count against initialized firmware slot count In panthor_drv.c:panthor_ioctl_group_create(), the queue count is validated against the hardcoded maximum: if (!args->queues.count || args->queues.count > MAX_CS_PER_CSG) return -EINVAL; However, if the firmware reports fewer slots than MAX_CS_PER_CSG, panthor_fw_init_ifaces() will only initialize that smaller number of stream interfaces. If unprivileged userspace requests more queues than the firmware reported (but no more than MAX_CS_PER_CSG), cs_slot_prog_locked() fetches an uninitialized stream interface and may crash when dereferencing cs_iface->input->ringbuf_base.
-
CVE-2026-99004
In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Size page table preallocation by device address Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for map() interface") passed the device address to pvr_mmu_op_context_create(), but the preallocation is still sized from device_addr + sgt_offset with an exclusive end. The offset into the object's pages has no place in a device-virtual range, and the exclusive end allocates one table too many when the range ends on a table boundary. Count the tables from device_addr and the inclusive end of the range. The new calculation does not take page table indices into account. This fixes another issue with the previous implementation, where the difference between start and end indices could underflow when a mapping crossed a page table boundary. This would lead to the driver preallocating a huge number of MMU pages, exhausting system memory and triggering an out of memory panic. [Alessio: add paragraph to point out OOM bug being fixed, cc stable]
-
CVE-2026-98996
In the Linux kernel, the following vulnerability has been resolved: fs: don't silently unmount busy mounts The propagate_mount_busy() helper exists to decide whether a synchronous can suceed. It does that by looking at the copies of the victims in the mounts its parent propagates to. One of those functions from propagation hell. It skips a copy that has child mounts except for the case of a single child mount covering the copy's root. That algorithm used to be exact. It isn't anymore. Originally only childless copies were unmounted during propagation. And 1064f874abc0 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.") ended up adding covered mounts to both sides in one go. Along came 99b19d16471e ("mnt: In propgate_umount handle visiting mounts in any order") and that started to unmount more than before: [1]: A copy of a mount is unmounted when each of its children is either its overmount or a copy of the victim itself. In the former case the overmount gets reparented. In the latter case the copy of the victim will end up being unmounted. So propagate_umount() ended up being rewritten without adjusting propagate_mount_busy(). And currently propagate_mount_busy() doesn't look at copies of the victim that have two or more children nor a single child that is not the overmount. So any such copy in [1] is not checked for references. The result is that a synchronous unmount succeeds, pulling out a mount that is still in use. A container can run into this with its own mounts. The host shares a tree with the container and the host has a mount in that tree: mount -t tmpfs none /mnt mount --make-shared /mnt mount -t tmpfs none /mnt/a The container's /mnt is a slave copy of the host mount. The container now takes a detached copy of the tree and mounts that copy beneath its propagated copy of /mnt/a and keeps the file descriptor to the tree open: unshare -m --propagation unchanged mount --make-rslave / fd = open_tree(AT_FDCWD, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE) move_mount(fd, "", AT_FDCWD, "/mnt/a", MOVE_MOUNT_BENEATH) grep /mnt /proc/self/mountinfo 775 355 ... /mnt ... master:646 777 775 ... /mnt/a ... master:646 776 777 ... /mnt/a ... master:647 778 777 ... /mnt/a/a ... master:647 The now attached tree (777) is now mounted beneath the container's copy of /mnt/a. That's also where the host mount sits (as seen from the host mount namespace). So the propagated copy (776) of the host's mount is on top of its root and the copy of that (778) is inside it. Now the host runs: umount /mnt/a and it succeeds. The moved tree tree and the copy inside of it are gone from the container. Now only the propagated copy is left and it got reparented to where it was before: grep /mnt /proc/self/mountinfo 775 355 ... /mnt ... master:646 776 775 ... /mnt/a ... But the file descriptor still refers to the moved tree. So a synchronous umount detached a mount that is still in use. Teach propagate_mount_busy() the same checks that propagate_umount() does. It now checks for a single victim mount without children for which it can assume that MNT_LOCKED is cleared on every copy like propagate_umount() does. The copies form chains. IOW, when a copy itself receives propagation from the victim's parent then the mount at the same mountpoint inside that copy is a copy as well. Whether a mount receives propagation from the victim's can simply be checked by walking its masters. Walk each chain once from its top so we are sure that nested copies stay linear. Check every reference once of every copy that gets unmounted.
-
CVE-2026-98989
In the Linux kernel, the following vulnerability has been resolved: namespace: check a recursive bind mount for mount namespace loops do_loopback() refuses to bind mount the file of a mount namespace that is as old as the caller's or older because a mount namespace that holds a mount of its own file, or of an ancestor's, would cause a cycle. But it only checks the dentry the bind mount starts from. With MS_REC everything below it is copied and do_loopback() passes CL_COPY_MNT_NS_FILE so mount namespace files below the source are copied. That's fine for a source in the caller's own mount namespace. Every mount namespace file in there passed the same check when it was bind-mounted. It isn't fine for a source in another mount namespace. may_copy_tree() accepts a bind mount of any nsfs or pidfs file no matter what mount namespace it lives in so that /proc/<pid>/ns/<ns> and pidfds can be bind mounted. If we create a bind-mount stack of mount namespaces file descriptors the kernel will copy them irrespective of their ancestoral relationship to the mount namespace in question: 151 146 0:7 net:[4026531833] /tmp/nrc/y rw - nsfs nsfs rw 152 151 0:7 mnt:[4026532293] /tmp/nrc/y rw - nsfs nsfs rw Mount 152 is a mount of the mount namespace file of mount namespace 4026532293 inside mount namespace 4026532293. That namespace and every mount in it are leaked... All it takes is a process in an older mount namespace that stacks the file and repeating it leaks without limit: after control: Shmem: 380 kB child: mount(/proc/self/fd/6, MS_BIND|MS_REC): ok after cycle: Shmem: 65916 kB do_move_mount() runs check_for_nsfs_mounts() over a detached tree for exactly that reason. Do the same for the copy before it is grafted.
-
CVE-2026-98949
In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix reference and vm_bo handling in remap() When a map overlaps part of an existing mapping, pvr_vm_gpuva_remap() splits the mapping into prev/next parts covering what the request did not take, instead of creating something new. It gets two things wrong. - A GEM reference is taken for each part but it's never needed and never dropped, so it leaks one reference per split (remap-next-in-2m in tests/imagination/pvr_vm_map.c): CRITICAL: 33558528 bytes of shmem still held after close - The parts still belong to the original object being split, but pvr_vm_gpuva_remap() links them to ctx->gpuvm_bo, the new object's vm_bo: prev_va --obj--> BO_A BO_B <--obj-- vm_bo (ctx->gpuvm_bo) \___________link___________/ (mismatch: BO_A != BO_B) drm_gpuva_link() catches the mismatch: WARNING: drivers/gpu/drm/drm_gpuvm.c:2108 at drm_gpuva_link+0x2ec/0x310 drm_WARN_ON(obj != vm_bo->obj) Call trace: drm_gpuva_link pvr_vm_gpuva_remap __drm_gpuvm_sm_map pvr_vm_map pvr_ioctl_vm_map Link them to op->remap.unmap->va->vm_bo instead. The locking of the GPUVA lists of the other objects touched by a split is not addressed here; it is handled by switching the GPUVM to immediate mode.
-
CVE-2026-98920
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing alloc tagging of direct mempool allocations Commit 1d78d56c43ef ("netfs: Fix folio_queue ENOMEM in writeback by adding a mempool") added a mempool for the folio_queues and made the request, subrequest and folio_queue allocations distinguish between writeback and everything else. Writeback is part of memory reclaim and must not fail due to ENOMEM, so it allocates under GFP_NOFS through mempool_alloc(), which may dip into the pool's reserve and, if that runs empty, wait for elements to be returned. The GFP_KERNEL paths, which can return -ENOMEM to their callers, invoke the pool's ->alloc() callback directly instead. The direct call, however, skips the alloc_hooks() wrapper that the mempool_alloc() macro provides. The pool callbacks, mempool_alloc_slab() and mempool_kmalloc(), call kmem_cache_alloc_noprof() and kmalloc_noprof() and rely on current->alloc_tag having been set by the caller. With CONFIG_MEM_ALLOC_PROFILING_DEBUG=y this leads to current->alloc_tag not set WARNING: ./include/linux/alloc_tag.h:161 at __alloc_tagging_slab_alloc_hook alloc_tag was not set WARNING: ./include/linux/alloc_tag.h:166 at __alloc_tagging_slab_free_hook at allocation and free time respectively, as reported when reading files on a CIFS mount. The allocations are also missing from /proc/allocinfo. Wrap the direct ->alloc() invocations in alloc_hooks() with a new mempool_alloc_noreserve() helper in include/linux/mempool.h, next to the other alloc_hooks()-wrapped macros such as mempool_alloc(). The GFP_KERNEL paths keep their failable allocation semantics, they just get tagged now.
-
CVE-2026-98923
In the Linux kernel, the following vulnerability has been resolved: arm64: io: Reject non-user protection in ioremap_prot() Mapping a stack-top page via /dev/mem with PROT_NONE and then reading that process's /proc/<pid>/cmdline triggers a spurious WARN in ioremap_prot() through generic_access_phys(): WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys Call trace: generic_access_phys+0x1c8/0x228 (P) __access_remote_vm+0x2b4/0x398 access_remote_vm+0x14/0x30 get_mm_cmdline+0xf8/0x2a0 proc_pid_cmdline_read+0x68/0x120 generic_access_phys() passes the protection derived from the user PTE to ioremap_prot(). On arm64, a PROT_NONE mapping is represented by a present-invalid PTE, so pte_present() still returns true and the protection reaches ioremap_prot(). A PROT_NONE mapping does not have PTE_USER, causing the existing WARN_ON_ONCE() in ioremap_prot() to fire even though this is a valid user mapping. Execute-only mappings have the same issue and must not be readable through this path either. ioremap_prot() should therefore reject protection values without PTE_USER without warning. This makes the access fail cleanly for PROT_NONE and execute-only mappings while retaining the existing user-protection contract.
-
CVE-2026-98929
In the Linux kernel, the following vulnerability has been resolved: macsec: initialize SecY before registering the netdevice Creating a MACsec device with MAC offload over an LRO-capable lower device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4 forwarding is enabled by default. register_netdevice() invokes inetdev_init(), which disables LRO and emits a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before macsec_add_dev() initializes the SecY. key_len is still zero, so macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in rtmsg_ifinfo_build_skb(), even though the skb has enough space. Even without the warning, notifications during registration can report uninitialized SecY attributes, including the SCI. This ordering has existed since the driver was introduced. Initialize the SecY and apply the new-link attributes before registration. Move MAC address inheritance into macsec_newlink() so the SCI can also be initialized before registration-time notifications report it. Move the per-CPU statistics and metadata destination allocation into ndo_init(), and release partial allocations on failure.
-
CVE-2026-99048
In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production.
-
CVE-2026-98997
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: only accept doorbell BOs as queue doorbell amdgpu_userq_get_doorbell_index() pins any BO passed as doorbell_handle into the doorbell domain. For a regular BO, TTM moves it with ttm_bo_move_null() and its contents are lost. Since an importer on the same device gets the exporter's GEM object, a client can do this to a buffer another client shared with it. Reject BOs that were not created in the doorbell domain. v2: drop the error message, use a local abo variable (Christian) (cherry picked from commit f7497bbc19db4821c62b9d97b31c9086feb2d917)
-
CVE-2026-98987
In the Linux kernel, the following vulnerability has been resolved: namespace: look at the topmost mount for a mount namespace file attach_recursive_mnt() preallocates a mountpoint for the root of the topmost mount of the source so that a mount that already sits at the destination can be put on top of the source or on top of one of its propagated copies. The copies are made without CL_COPY_MNT_NS_FILE so their chain of overmounts is shorter than the source's. It ends below the first bind mount of a mount namespace file. So while the loop walks up the chain of the source it remembers the mountpoint of that mount in "shorter" and the existing mount is put there for the copies. But the loop ends at the topmost mount without ever looking at it. If the topmost mount is the only mount namespace file in the chain "shorter" stays NULL and mnt_change_mountpoint() attaches the existing mount of the copy below the root of the mount namespace file. That's a dentry of nsfs. No path walk in the copy's mount namespace ever gets there. The mount is gone until its parent goes and the copy that took its place can't be unmounted synchronously because it has a child: S bind mount of a file N bind mount of a mount namespace file on top of S A shared mount, B a slave of A, Q mounted on B/file move_mount(S, A/file) cat B/file -> the content of S instead of Q umount B/file -> EBUSY Look at every mount of the chain including the topmost one.
-
CVE-2026-98961
In the Linux kernel, the following vulnerability has been resolved: btrfs: unlock inode and extent in caller when io_uring read extent fails btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken the inode shared lock and the extent lock. On failure it used to unlock in out_fail, and a pages-array allocation failure returned -ENOMEM without unlocking at all. Unlock in the caller instead on all failure returns, matching the copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks in btrfs_uring_read_finished().
-
CVE-2026-98939
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Drop unnecessary PMD page copy when freeing On a box with a discrete GPU, lockdep reports a possible deadlock as soon as kswapd shrinks the TTM page pool. The immediate cause is an x86 commit that added an mmap_read_lock() to kernel page protection munging code. The huge vmap code holds the same lock over a GFP_KERNEL allocation, which is a no-no now that reclaim can take it. That allocation is in a page table *free* path and ends up being for dubious purposes[1]. Basically, it tries to avoid hardware setting Accessed=1 in page table entries that are unreachable by the hardware, a non-issue. Remove the PMD copy. Detach the original PMD page at the PUD, flush the mid-level caches, and free the PTE tables straight from the detached PMD page. With no allocation left, the locking issue is gone. Lockdep splat/analysis: WARNING: possible circular locking dependency detected 7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U ------------------------------------------------------ kswapd0/269 is trying to acquire lock: ((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0 but task is already holding lock: (pool_shrink_rwsem){.+.+}-{4:4}, at: ttm_pool_shrink+0xb2/0x330 [ttm] Chain exists of: (init_mm).mmap_lock --> fs_reclaim --> pool_shrink_rwsem The cycle is built from three edges: 1) pool_shrink_rwsem -> (init_mm).mmap_lock The TTM shrinker restores the caching attribute of every page it frees, while holding pool_shrink_rwsem: ttm_pool_shrink() -> ttm_pool_dispose_list() -> ttm_pool_free_page() -> set_pages_wb() -> change_page_attr_set_clr() [ init_mm mmap read lock ] 2) fs_reclaim -> pool_shrink_rwsem The same shrinker, called from reclaim. 3) (init_mm).mmap_lock -> fs_reclaim ioremap() installing a huge PUD mapping over an existing PMD table: ioremap_page_range() -> vmap_range_noflush() -> vmap_try_huge_pud() [ init_mm mmap read lock ] -> pud_free_pmd_page() -> __get_free_page(GFP_KERNEL) [ enters reclaim ] [ dhansen: Lots of changelog munging/trimming and merged comments from my version of the fix. ]
-
CVE-2026-98928
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2 pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve() tests the bit while vcpu_has_sve() reads the flag. A host that sets the flag without the bit gets a vCPU with a NULL sve_state that the world switch loads the guest's SVE state from. Derive the flag from the bit, and drop the protected path's copy of the host's flag, which is dead code since protected VMs are not allowed SVE.
-
CVE-2026-99086
In the Linux kernel, the following vulnerability has been resolved: dm-integrity: validate the superblock on resume dm_integrity_resume() re-reads the superblock from the device so that it picks up the flags and the recalculate position. It performs no validation on the result, while the constructor validates the superblock it reads and sizes all the in-memory structures according to it. The user may modify the superblock on the underlying device while the dm-integrity device is suspended, so that the two no longer agree. In particular, access_journal_data() shifts the journal entry index by ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the journal page list were computed with the value that was present at constructor time. Increasing log2_sectors_per_block makes the index run past the end of the journal, and dm-integrity then writes 512 bytes through lowmem_page_address(NULL). Snapshot the validated superblock in the constructor and refuse to resume if any of the fields that describe the on-disk geometry changed.
-
CVE-2026-99085
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU.
-
CVE-2026-98983
In the Linux kernel, the following vulnerability has been resolved: unshare: don't drop active namespace references that were never taken Active references on the namespaces of an nsproxy are taken when the nsproxy is installed into a task in switch_task_namespaces() and copy_namespaces() and dropped again by put_nsproxy() through deactivate_nsproxy(). But ksys_unshare() calls put_nsproxy() on an nsproxy that was never installed when set_cred_ucounts() fails. The new namespaces of that nsproxy go from zero to minus one and the namespaces shared with the caller lose a reference that belongs to the nsproxy the caller keeps using: WARNING: kernel/nscommon.c:171 at __ns_ref_active_put+0x1cd/0x230 nsproxy_ns_active_put deactivate_nsproxy ksys_unshare Afterwards the namespaces the caller lives in aren't listed by listns() anymore. set_cred_ucounts() only fails when alloc_ucounts() can't allocate and it only allocates when the real uid of the caller differs from its effective uid. Commit cefd55bd2159 ("nsproxy: fix free_nsproxy() and simplify create_new_namespaces()") separated the two cases on purpose. nsproxy_free() frees an nsproxy that was prepared but never installed and that's what a failed setns() uses in put_nsset(). Export it and use it for a failed unshare() as well.
-
CVE-2026-98972
In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Don't access cpuset_cgrp_subsys.root in is_in_v2_mode() After seeing the patch [1] to guard is_in_v2_mode() with RCU, it makes me realize that is_in_v2_mode() may be called in a context where a new cgroup filesystem is being rebound with stale cpuset_cgrp_subsys.root pointer. Avoid this potential UaF situation by adding a new cpuset_v2_mode flag which is set when the cpuset_v2_mode mount option is used. This flag is written into only when cpuset_bind() is being called with a stable cpuset_cgrp_subsys.root value. The is_in_v2_mode() helper is modified to read the new cpuset_v2_mode flag instead of accessing cpuset_cgrp_subsys.root directly. [1] https://lore.kernel.org/lkml/[email protected]
-
CVE-2026-98942
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Build the cid tables privately and publish them with RCU The cid tables are visible to the cid kfuncs while being modified: the first enable publishes the global pointers before filling them, ops.init_cids() overrides rewrite them in place, and re-enables rebuild them in place. A racing TRACING or SYSCALL program can read unfilled entries, including uninitialized memory in the kmalloc'd tables, or torn topo updates. Tie the tables' lifetimes to the root sched instead: each root enable builds a fresh set privately and publishes the per-table __rcu globals once the layout is final, and root disable unpublishes and RCU-frees the set. A non-NULL global is now always a fully built table which stays valid for the reader's RCU read section, and lookups stay two loads. Kfuncs treat NULL as no-mapping, also after the scheduler exits instead of reporting the stale last mapping. The cid kfuncs are available whether the root scheduler is cid-form or cpu-form, the latter to allow gradual migration to cids. Every root therefore builds and publishes a default mapping. Every reader must either be gated on scheduler liveness or NULL-check inside an RCU read section. Fix the two kfuncs that were neither: scx_bpf_this_cid() read the table with no RCU or preemption protection and scx_bpf_task_cid() relied on KF_RCU, which doesn't put a sleepable program in an RCU read section. The hotplug callbacks are instead serialized by retiring the tables inside the cpus_read_lock() section that clears scx_root. v2: Document why every root builds the tables (desc + cid.c comment).
-
CVE-2026-98946
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Disable the V3D interrupt across runtime suspend vc4_irq_disable() masks the V3D interrupt sources and then calls synchronize_irq() before the V3D is powered down. However, by itself, this is not enough to quiesce the interrupt handler. synchronize_irq() waits for handlers that have already set IRQD_IRQ_INPROGRESS, and for irqchips reporting IRQCHIP_STATE_ACTIVE. A GIC interrupt chip is able to mark an interrupt active as soon as a CPU acknowledges it, so there these checks cover the whole dispatch path. On RPi 0-3, however, the interrupt controller is ARMCTRL, which has no active state. A CPU that has read the hwirq out of the pending register but has not yet reached handle_level_irq() stays invisible to synchronize_irq(). During a power transition, vc4_irq() may therefore run after the power domain is off, where every V3D register read will return 0xdeadbeef. 0xdeadbeef has FLDONE, FRDONE and OUTOMEM set. This problem doesn't trigger NULL pointer dereference issues only because the functions vc4_irq_finish_bin_job() and vc4_irq_finish_render_job() return early when there is no job pointer, but OUTOMEM is still able to schedule vc4_overflow_mem_work() after vc4_irq_disable() has already cancelled it. Therefore, fix the spurious interrupts by disabling the interrupt line across the PM transition. To preserve the enable/disable balance, move vc4_irq_install() and request the IRQ line disabled before the first runtime resume.
-
CVE-2026-98918
In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold() __damon_va_prepare_access_check() picks a random byte address within the region and stores it in r->sampling_addr. damon_va_mkold() passes it into a page table walk, which hands it to damon_ptep_mkold() as the address of the page to sample: damon_va_mkold(mm, r->sampling_addr) damon_va_walk_page_range(mm, addr, addr + 1) damon_mkold_pmd_entry() damon_ptep_mkold(pte, vma, addr) ptep_test_and_clear_young(vma, addr, pte) mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE) For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing of the young flag for large folios"), the contpte helper walked exactly CONT_PTES entries from the aligned-down page table pointer and used @addr only to pass down to each entry, so an unaligned value was harmless: ptep = contpte_align_down(ptep); addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) Now the range to walk is derived from @addr instead: end = addr + nr * PAGE_SIZE, rounded up to CONT_PTE_SIZE. For a sample in the last page of a contpte block, the sub-page offset puts end just past the block boundary, so the round-up lands a whole block further and the walk clears PTE_AF in CONT_PTES entries beyond the sampled block. For the last block in a page table page, those entries are past the end of that page, so the walk writes into the page that follows. Triggered by the full 7.1/7.2 kernel selftest suite on arm64 (EC2 c/m6g.4xlarge). The kernel sometimes crashes at or shortly after the DAMON test. What the overrun does depends on the page that happens to follow the page table, so there is no single signature. If that page is read-only, the write faults in the sampling path itself: Unable to handle kernel write to read-only memory at virtual address ffff0003c5d2d000 FSC = 0x0f: level 3 permission fault CM = 0, WnR = 1, TnD = 0, TagAccess = 0 CPU: 10 UID: 0 PID: 3487 Comm: kdamond.2 pc : contpte_test_and_clear_young_ptes+0x70/0xc0 lr : damon_ptep_mkold+0x1e8/0x1f8 Call trace: contpte_test_and_clear_young_ptes+0x70/0xc0 (P) damon_mkold_pmd_entry+0x150/0x170 walk_pmd_range+0x110/0x2b0 walk_pud_range+0x10c/0x208 walk_pgd_range+0x134/0x258 __walk_page_range+0x98/0x1b0 walk_page_range_vma_unsafe+0x90/0x148 walk_page_range_vma+0x28/0x40 damon_va_walk_page_range+0x114/0x2b8 damon_va_prepare_access_checks+0xec/0x1a8 kdamond_fn+0x534/0x770 kthread+0x128/0x138 ret_from_fork+0x10/0x20 Otherwise the page is writable, the PTE_AF clearing succeeds silently and the damage only surfaces later, in whatever happened to own the page, so the backtrace is unrelated to DAMON and differs between runs. Pass a page-aligned address to the ptep_test_and_clear_young() call in damon_ptep_mkold(), which is the only place DAMON can reach contpte_test_and_clear_young_ptes() from. Nothing else sees the aligned address, and r->sampling_addr itself is left as is, so the sampling and region bookkeeping semantics are unchanged.
-
CVE-2026-99072
In the Linux kernel, the following vulnerability has been resolved: ipv4: stop route notification sizing when nexthop group shrinks Commit 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") added an RCU-only fib_nlmsg_size() call for asynchronous hardware flag notifications. fib_nlmsg_size() checks fib_info_num_path() before each iteration, then fib_info_nhc() independently reloads nh->nh_grp. If RTM_NEWNEXTHOP replaces a group with fewer paths between those loads, fib_info_nhc() returns NULL and fib_nexthop_nlmsg_size() dereferences it. Stop sizing when the indexed path is absent. Nexthop groups are dense, so the current snapshot has no later path.
-
CVE-2026-99073
In the Linux kernel, the following vulnerability has been resolved: ipv4: stop exception dump when nexthop group shrinks Commit 4ce5dc9316de ("inet: switch inet_dump_fib() to RCU protection") allowed IPv4 FIB dumps to run concurrently with nexthop replacement. fib_dump_info_fnhe() uses fib_info_num_path() as the loop bound, then fib_info_nhc() independently reloads nh->nh_grp. If RTM_NEWNEXTHOP replaces a group with fewer paths between those loads, fib_info_nhc() returns NULL and the dump dereferences it through nhc_flags. Stop the walk when the indexed path is absent. Nexthop groups are dense, so the current snapshot has no later path.
-
CVE-2026-98938
In the Linux kernel, the following vulnerability has been resolved: rust: irq: pass RegistrationInner as cookie to request_irq With commit ba268514ea14 ("rust: devres: fix race condition due to nesting"), Devres::new() returns Result<Self> by value instead of initializing in-place via PinInit. Because request_irq() is called inside Devres::new(), registration.inner is still uninitialized when the IRQ is enabled, so accessing registration.inner.device() in the IRQ callback can read uninitialized memory. Fix this by storing the Device and handler pointer in RegistrationInner and passing RegistrationInner as the IRQ cookie after its fields are initialized. This is not needed in mainline because commit 98c63ce4d760 ("rust: irq: make Registration compatible with lifetime-bound drivers") removed Devres from irq::Registration and moved request_irq() after all fields are initialized.
-
CVE-2026-98998
In the Linux kernel, the following vulnerability has been resolved: drm/bridge: th1520-dw-hdmi: Fix remove() callback This driver stores struct th1520_hdmi * in platform drvdata, but th1520_dw_hdmi_remove() was reading it back as struct dw_hdmi * and passing it to dw_hdmi_remove(), so teardown runs on the wrong pointer. Retrieve struct th1520_hdmi * from platform drvdata and pass hdmi->dw_hdmi to dw_hdmi_remove().
-
CVE-2026-98994
In the Linux kernel, the following vulnerability has been resolved: statmount: read the parent of an unmounted mount under mount_lock statmount_mnt_basic() reads the ids of the parent through m->mnt_parent with namespace_sem held for reading. That's fine for a mount that is in a namespace. Everything above it is pinned by that namespace. STATMOUNT_BY_FD also accepts a file descriptor on a mount that has been unmounted on purpose and that only the file descriptor keeps alive. If that mount stayed attached to its parent when it was unmounted the parent is unmounted as well and nothing pins it for the child. The final mntput() unmounts the children under mount_lock alone and frees the parent afterwards. Concurrently, statmount_mnt_basic() reads m->mnt_parent twice while that can happen and can easily dereference a mount that's already gone. Read the parent of an unmounted mount under mount_lock. The parent can't be put while it is held and both ids come from the same mount. A mounted mount's parent is pinned by the namespace and a mount can't leave its namespace while namespace_sem is held, so the common case takes no global lock.
-
CVE-2026-98966
In the Linux kernel, the following vulnerability has been resolved: bonding: fix the program leak when XDP is replaced We need to release the reference on the old BPF prog, whether we are going to no-prog, or replacing the prog with another. Spotted by AI while running tests for the propagation series (leaked programs were accumulating). Selftest will come in the net-next series to avoid conflicts.
-
CVE-2026-98973
In the Linux kernel, the following vulnerability has been resolved: drm/bridge: Fix unlocked list_del in drm_bridge_add() When re-adding a bridge that was previously removed, drm_bridge_add() drops it from bridge_lingering_list without holding bridge_lock. Both bridge_list and bridge_lingering_list are protected by bridge_lock, as they are concurrently modified by drm_bridge_remove() and __drm_bridge_free(), and walked by the debugfs 'bridges' file. Running the list_empty() test and the list_del_init() outside of the lock may therefore corrupt either list. Perform both under bridge_lock.
-
CVE-2026-98960
In the Linux kernel, the following vulnerability has been resolved: btrfs: don't stash io_uring encoded data across -EAGAIN Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU leaks if the request is cancelled or the ring exits before reissue. io_uring does not free driver PDU allocations on cleanup. Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so return -EAGAIN before allocating and free data on every exit. Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation for btrfs_uring_read_finished().
-
CVE-2026-98951
In the Linux kernel, the following vulnerability has been resolved: riscv: ptrace: Zero-initialize regset buffers before copyin user_regset_copyin() only copies `count` bytes, so a PTRACE_SETREGSET request with a short iov_len leaves the rest of the stack buffer uninitialized. In riscv_vr_set() that garbage is validated and copied into the target's vstate, and in riscv_cfi_set() it can be stored as the target's shadow stack pointer. Zero both buffers, as the get path already does.
-
CVE-2026-98926
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove sink usage from DPMS [Why] stream->sink is optional and can be null, so should always be checked before dereference. Additionally, most of its usage in DPMS sequences is for stream->sink->link, which can be replaced with stream->link, as the two should always be the same. [How] * Replace stream->sink->link in DPMS on/off * Add assert to USB4 BW allocation where sink is required * Avoid inconsistencies in resource access, e.g. don't repeat stream->link after it was already saved to a local variable * Pull out effective VPG calculation to helper getter * Formatting fixes
-
CVE-2026-98893
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate SENSOR_UPDATE payload size SENSOR_UPDATE carries one or more sensor readings after the fixed notification header. The parser derives the expected reading count from the sensor description, but it did not verify that the received payload contains those entries before parsing them. Reject truncated update notifications before reading the variable array.
-
CVE-2026-99074
In the Linux kernel, the following vulnerability has been resolved: ipv4: stop PMTU walk when nexthop group shrinks Commit 7d3f3b4367f3 ("net: ipv4: Cache pmtu for all packet paths if multipath enabled") made __ip_rt_update_pmtu() update every path. For nexthop objects, fib_info_num_path() and fib_info_nhc() independently load nh->nh_grp. RCU protects each group's lifetime but does not make the loads observe the same group. If replacement shrinks the group after the loop accepts an index, fib_info_nhc() returns NULL and update_or_create_fnhe() dereferences it. A deterministic probe only widened the existing window between the real operations. On v7.2, an RTM_NEWNEXTHOP replacement published a one-member group after the PMTU reader accepted index 1 from a two-member group, producing: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: update_or_create_fnhe+0x45/0x15b0 Stop when the indexed path is absent. Groups are dense, so no later index exists in that snapshot. The same real-writer window completed 114,423 PMTU iterations without an oops with this check. A reproducer is available on request. Replacement requires CAP_NET_ADMIN in the network namespace. Where unprivileged user namespaces are permitted, a local user can obtain it in a new user and network namespace.
-
CVE-2026-99084
In the Linux kernel, the following vulnerability has been resolved: readdir: take no inode lock on an immutable directory iterate_dir() takes the directory's i_rwsem shared and holds it across ->iterate_shared(). For a directory that never has an entry and is never removed the lock keeps nothing still, it only orders every reader and every writer of that inode behind each other. For the directory of a nullfs instance that matters. The instance of the initial mount namespace is the root of every empty mount namespace and the private instance is the root of every kernel thread, so one inode is shared across users who have nothing else in common. And a reader can hold the lock for as long as it likes: back the getdents() buffer with a mapping of a file on a FUSE mount of your own, let the copy of "." and ".." fault and let the server wait. Queue an exclusive taker behind it, a mkdir() in that directory goes through start_dirop() before the read-only mount is reported, and from then on every lookup that misses the dcache in that directory, every create and every mount on it waits until the server answers. One user of an empty mount namespace stalls all the others. Add FOP_IMMUTABLE for the file operations of a directory that never changes and is never removed and let iterate_dir() skip the lock for it. The flag never changes for a file, ->f_pos is protected by f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be set on such a directory and neither touch_atime() nor fsnotify take i_rwsem. Set it on the nullfs directory. The placeholder directories of libfs never have an entry either but their owners remove them, so they keep the lock.
-
CVE-2026-98916
In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: check link is beaconing for color change When trying to do a color change, validate that the link is beaconing first, to avoid calling the driver with an invalid link.
-
CVE-2026-98903
In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Add a channel shutdown field sashiko complained about possible teardown problem. The scenario CPU 0 CPU 1 imx_mu_isr() imx_mu_shutdown() imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx)); imx_mu_specific_rx() imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0); free_irq() The RX event remains enabled because in this short window the RX event was disabled in ->shutdown() while the interrupt was active and then enabled again by the ISR while ->shutdown waited in free_irq(). This race requires timing and if happens can be problematic on shared handlers if the "removed" channel triggers an interrupt. In this case the irq-core will shutdown the interrupt with the "nobody cared" message. Introduce imx_mu_con_priv::shutdown to signal that the channel is shutting down. This flag is set with the lock held (by imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which only enables the event if the channel has not been shutdown and serialises on the same lock.
-
CVE-2026-98894
In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: reset CPER ring on corrupt entry size When CPER ring overflow handling advances the read pointer, it trusts the parsed entry size from the current ring contents. Corrupt CPER data can produce an entry size that does not advance rptr after dword conversion and pointer masking. In that case the recovery loop keeps testing the same location while holding the CPER ring mutex. This can hang the worker that is writing the next CPER record. Detect a no-progress rptr update and reset the CPER ring to an empty state instead. This drops the corrupt contents and lets the writer leave the recovery path without spinning.
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.