No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2026-128658
PHPGurukul Beauty Parlour Management System V1.1 uses a non-cryptographic function to generate security-sensitive appointment and invoice identifiers. The identifiers are generated within a restricted numeric range and are subsequently used in record lookup operations. This implementation exposes the application to identifier prediction or guessing attacks under conditions where the identifiers are relied upon as a security boundary.
-
CVE-2026-128719
An issue in PHPGurukul Employee Leaves Management System (ELMS) Version 2.1 allows a remote attacker to escalate privileges via the password recovery functionality
-
CVE-2026-99319
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Refuse a retried DSP load after a failure snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and the interrupt URB when the FPGA firmware image with index 1 is loaded, and then creates the ALSA devices. If usx2y_in04_init() or usx2y_create_alsa_devices() fails, the URBs that were already set up are left in place. The core keeps the index unloaded when the callback fails, so user space may issue the same request again. The second attempt then enters usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still allocated and trips WARN_ON(usx2y->as04.buffer) or WARN_ON(usx2y->in04_urb). The URBs cannot be released at this point: the card may already have registered PCM devices that user space can still open, and the disconnect handler accesses the URBs without holding the DSP lock. Mark the chip as hung instead, so that a retried request is refused with -ENODEV and the assertions keep their meaning. The URBs are released by snd_usx2y_card_private_free() when the card is freed. A failing usx2y_async_seq04_init() still releases its own URBs, so that path remains retryable.
-
CVE-2026-99315
In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Fix NULL dereference at hwdep open and release usb_stream_hwdep_open() and usb_stream_hwdep_release() pass the result of usb_ifnum_to_if() straight to usb_autopm_get_interface() and usb_autopm_put_interface(), without checking it for NULL. usb_ifnum_to_if() returns NULL once the device is gone, since usb_disable_device() clears udev->actconfig on disconnect. The hwdep file can outlive the disconnect: the card is released with snd_card_free_when_closed(), so a process that keeps the character device open reaches the driver's release callback after the USB configuration has been dropped, and interface_to_usbdev() then dereferences the NULL interface at offsetof(struct device, parent). The open callback has the same problem when it races with the disconnect. Check both lookups and fail the open with -ENODEV; in release, skip the runtime PM put when the interface is already gone and still run the rest of the per-file cleanup. Move the us122l->first bookkeeping after the checks so that a failed open no longer leaves a stale file pointer behind.
-
CVE-2026-99303
In the Linux kernel, the following vulnerability has been resolved: speakup: Fix NULL pointer dereference on VT switch + selection When selecting/pasting very quickly after VT switch, the tty is not set yet, leading to a NULL dereference. We can just abort the operation.
-
CVE-2026-99299
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: reject audio endpoint with zero packet size em28xx_audio_urb_init() divides by the audio endpoint's wMaxPacketSize without checking it, so a USB device that declares a zero-sized audio endpoint divides by zero at probe time. Reject a zero-sized audio endpoint like a missing one; the caller already unwinds on a negative return. Oops: divide error: 0000 [#1] SMP NOPTI Workqueue: usb_hub_wq hub_event RIP: 0010:em28xx_audio_init (drivers/media/usb/em28xx/em28xx-audio.c:718) Call Trace: em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) em28xx_init_dev.isra.0 (drivers/media/usb/em28xx/em28xx-cards.c:3887) em28xx_usb_probe (drivers/media/usb/em28xx/em28xx-cards.c:4258) usb_probe_interface (drivers/usb/core/driver.c:396) ... usb_set_configuration (drivers/usb/core/message.c:2268) usb_generic_driver_probe (drivers/usb/core/generic.c:250) usb_probe_device (drivers/usb/core/driver.c:291) ... usb_new_device (drivers/usb/core/hub.c:2703) hub_event (drivers/usb/core/hub.c:5961) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-99300
In the Linux kernel, the following vulnerability has been resolved: media: go7007: only set audio_enabled if go7007_snd_init() succeeded go7007_register_encoder() sets go->audio_enabled before calling go7007_snd_init() and discards its return value. go7007_snd_init() assigns go->snd_context only on success, so a failed ALSA setup leaves audio_enabled set with snd_context still NULL. The disconnect path tests audio_enabled and calls go7007_snd_remove(), which dereferences snd_context unconditionally. go7007_snd_init() returns -ENODEV once its never-decremented static card counter reaches SNDRV_CARDS, so SNDRV_CARDS attach/detach cycles arm the next attach; no memory pressure is needed. Set go->audio_enabled only once go7007_snd_init() has succeeded. Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: usb_hub_wq hub_event RIP: 0010:go7007_snd_remove (drivers/media/usb/go7007/snd-go7007.c:273) Call Trace: go7007_usb_disconnect (drivers/media/usb/go7007/go7007-usb.c:1336) usb_unbind_interface (drivers/usb/core/driver.c:461) device_remove (drivers/base/dd.c:618) device_release_driver_internal (drivers/base/dd.c:1349) bus_remove_device (drivers/base/bus.c:664) device_del (drivers/base/core.c:3965) usb_disable_device (drivers/usb/core/message.c:1478) usb_disconnect hub_event (drivers/usb/core/hub.c:5966) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-116115
A security vulnerability has been detected in Yoosee GM8135S Camera 21.00.01.36. This impacts an unknown function of the file wpa_supplicantX.conf of the component WiFi Configuration. Such manipulation leads to improper initialization. The attack can only be initiated within the local network. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-99287
In the Linux kernel, the following vulnerability has been resolved: xen-netback: Zero out sring pointers on unmap If xenvif_map_frontend_data_rings() fails when a ring is already mapped, it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the ring pointers unchanged. xenvif_connect_data()'s cleanup path calls xenvif_disconnect_queue() which in turn calls xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the pointers a second time. Zero out the ring pointers after they are unmapped to avoid this issue. This is XSA-532
-
CVE-2026-99286
In the Linux kernel, the following vulnerability has been resolved: xen-netback: Fix XenBus connection failure cleanup xenvif_get_stats and xenvif_get_ethtool_stats capture vif->num_queues under rcu_read_lock. We need to unpublish vif->num_queues before synchronize_net to ensure that readers that come afterwards will not read a non-zero vif->num_queues and attempt to access invalid queues. This is the same cleanup algorithm as used in backend_disconnect and added in commit b17075d5c198 ("xen-netback: fix race condition on XenBus disconnect"). This is XSA-531
-
CVE-2026-99285
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_byteorder: remove multi-register support 64bit byteorder conversion is broken when several registers need to be converted because the source register array advances in steps for 4 bytes instead of 8: for (i = ... src64 = nft_reg_load64(&src[i]); ~~~~~ u32 *src nft_reg_store64(&dst64[i], Remove the multi-register support, it has other issues as well: Pablo points out that commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") alters semantics: before the loop operated on registers, i.e. for ( ... ) dst32[i] = htons((u16)src32[i]) .. but after the patch it will operate on bytes, which makes this useless to convert e.g. concatenations, which store each compound in its own register. Multi-convert of u32 has one theoretical application: ct mark . meta mark . tcp dport @intervalset Because ct mark and meta mark are host byte order, use with intervals has to convert the byteorder for ct/meta mark value to network byte order (bigendian). nftables emits this: [ meta load mark => reg 1 ] [ byteorder reg 1 = hton(reg 1, 4, 4) ] [ ct load mark => reg 9 ] [ byteorder reg 9 = hton(reg 9, 4, 4) ] ... I.e. two separate calls. Theoretically it could be changed to do: [ meta load mark => reg 1 ] [ ct load mark => reg 9 ] [ byteorder reg 1 = htonl(reg 1, 4, 8) ] ... But then all it would take to change the set to meta mark . tcp dport . ct mark ... and we'd be back to two "byteorder" calls. IOW, support to convert a range of registers is both dysfunctional and dubious. Simplify this: remove the feature. Pablo Neira Ayuso points out that nftables before 1.1.0 can generate incorrect byteorder conversions, see 9fe58952c45a, "evaluate: skip byteorder conversion for selector smaller than 2 bytes" in nftables.git). Affected rulesets fail to load with this change and old userspace due to 'len != size' check.
-
CVE-2026-59599
Android on supported Pixel devices before security patch level 2026-11-05 allows elevation of privilege in the hypervisor subcomponent in the kernel, aka A-519434175.
-
CVE-2026-99284
In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker in skb_zerocopy() skb_zerocopy() moves frag descriptors from @from into @to and takes a reference on each frag, but it does not copy skb_shinfo(from)->flags into skb_shinfo(to)->flags. A destination skb holding the same page-cache backed frags as the source therefore reports skb_has_shared_frag() as false. That breaks the invariant relied on by later in-place writers. ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(); with the marker lost, an skb that skb_zerocopy() built for nfnetlink_queue or for an openvswitch upcall is decrypted in place, letting an unprivileged user write into the page cache of a root-owned read-only file. Propagate SKBFL_SHARED_FRAG when frag descriptors are copied, as done for the other frag-transfer helpers.
-
CVE-2026-99283
In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets Commit be0502a3f2e9 ("netfilter: conntrack: tcp: only close if RST matches exact sequence") keeps an established conntrack entry in ESTABLISHED when an in-window RST does not match the expected sequence number exactly, so the endpoint can validate the RST with a challenge ACK. The timeout selection nevertheless uses the CLOSE timeout for every RST packet. The bug is that timeout selection is based on the packet type, not on the state transition result: even when RST validation keeps new_state in ESTABLISHED, the timeout is still forced to TCP_CONNTRACK_CLOSE. Linux TCP independently rate limits challenge ACKs per socket. A second non-exact RST can therefore arrive after the first challenge ACK has restored the timeout but before the rate limit expires. The second RST lowers the timeout to 10 seconds again while the endpoint suppresses the second challenge ACK, allowing the conntrack entry to expire while both TCP endpoints remain established. Using the ESTABLISHED timeout for such RSTs would avoid this short expiration window, but it could also retain stale entries for the five-day default because conntrack cannot reliably match the endpoint's exact TCP state. Use the UNACK timeout for RST packets that leave the conntrack entry in TCP_CONNTRACK_ESTABLISHED. Exact-match RSTs and accepted RST packet trains still fall through to timeouts[new_state], which preserves the CLOSE timeout when conntrack accepts the RST as closing the flow. This avoids the aggressive 10-second expiration window for non-exact RSTs while preserving the short timeout for RSTs that conntrack accepts as closing the flow.
-
CVE-2026-99278
In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit sessions on each connection The pending setup limit only counts InProgress sessions. A client can complete authentication repeatedly and retain an unbounded number of Valid sessions on one connection. Reserve a connection slot before allocating a session and retain a connection reference while authentication is in progress. The first SMB3 channel takes over that reservation; binding to another connection reserves one slot there. Reauthentication and authentication continuation reuse the existing reservation. Return slots on allocation or insertion failure, channel removal, and final session destruction. Accept max_sessions_per_connection in reserved startup-request space and default to 64 when older tools leave it zero. Keep the request size and existing field offsets unchanged. Expose the configured limit in procfs. The existing connection limits bound the aggregate number of sessions without a separate global session allocation limit.
-
CVE-2026-99275
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short SESSION_SETUP responses smb2_check_message() accepts frames shorter than struct smb2_pdu when the SMB2 status is non-zero, before the minimum-PDU check added by b4694f269e66d. A 64-byte STATUS_MORE_PROCESSING_REQUIRED SESSION_SETUP response is therefore accepted even though it cannot contain the SecurityBufferOffset and SecurityBufferLength fields. The parser then reads those fields from stale bytes left in the reused receive buffer by an earlier frame. With a long stale SecurityBufferLength, decode_ntlmssp_challenge() copies up to about 64 KB from beyond the receive object and sends the data back to the server in the NTLMv2 AUTHENTICATE target info. Reject short MPR SESSION_SETUP responses before the short-error path, and validate SecurityBufferOffset + SecurityBufferLength against the received response length before decoding the challenge. The ordering bypass is not new: the short-error early return predates b4694f269e66d, and the unvalidated SecurityBufferLength read predates the 2016 raw NTLMSSP split in 166cea4dc3a4, so all supported stable trees are affected. Reproduced on 6.6.87.2; the path is unchanged on mainline.
-
CVE-2026-99280
In the Linux kernel, the following vulnerability has been resolved: ksmbd: drain session procfs readers before dropping table references Session registration failure and connection cleanup can drop the table reference while the per-session procfs entry is still accessible. If a reader holds the last remaining reference, its final put calls proc_remove() from its own callback and waits for that callback to finish. Remove the procfs entry before dropping the table reference in the registration failure path. Queue sessions removed during connection cleanup and drain their procfs readers after releasing both session locks, then return their table references. Keep the global hash node unhashed while a session is queued so a concurrent unregister cannot drop the reference again. Previous-session replacement also destroys the file table before the session is finally freed. Detach the idr under the lock used by procfs file counters, and report zero files after it has been detached. This prevents a reader from accessing the idr during or after its destruction.
-
CVE-2026-99276
In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer connection scavenging while session locks are busy The expiration worker holds conn_list_lock for reading while checking for authenticated sessions. Without this change, the check can wait for conn->session_lock or sessions_table_lock. In destroy_previous_session(), the status updates after ksmbd_conn_wait_idle_sess() run with both session locks held for writing. Both the KSMBD_SESS_GOOD error path and the KSMBD_SESS_NEED_SETUP success path call ksmbd_all_conn_set_status(), which takes conn_list_lock for reading. A writer queued on conn_list_lock can block these new read acquisitions. The worker then waits for a session lock held by destroy_previous_session(), which waits behind the writer. The writer cannot proceed until the worker releases conn_list_lock. Try both session locks instead of waiting in the scavenging check. Keep the connection when either lock is busy and let the periodic worker retry later.
-
CVE-2026-99279
In the Linux kernel, the following vulnerability has been resolved: ksmbd: reclaim ended sessions on logoff and expiration LOGOFF and previous-session replacement leave sessions Expired with a zero credential expiry. Ended sessions can retain their memory and connection slots when no further setup arrives on the owning connection. Unpublish a logged-off session while the request reference keeps its response signing and encryption keys alive. Remove its procfs entry before dropping the table reference so a reader cannot remove its own entry on the last put. Clear proc_entry after removal to avoid removing it twice. Reclaim ended sessions from the global table in the existing expiration worker before it acquires conn_list_lock. Only select Expired sessions with zero credential expiry and no references beyond the table reference. Keep sessions whose Kerberos credentials expired available for reauthentication. Unlink the session from its setup connection and all channel connections, so SMB2 sessions and sessions with only secondary SMB3 channels are covered. The session already holds connection references, and sessions_table_lock prevents concurrent channel removal. Queue sessions on a separate disposal list, leaving their hash nodes unhashed, and remove procfs entries and drop table references outside the locks. Keep the pending setup check before allocating a new session so abandoned InProgress sessions can release their slots even at the connection limit. Retain the timeout and reference checks and dispose of those sessions outside the locks. Leave ended Expired sessions to the expiration worker.
-
CVE-2026-99245
In the Linux kernel, the following vulnerability has been resolved: KEYS: Fix key_reject_and_link() race with keyring restriction The restrict_link check in key_reject_and_link() is done before taking the keyring semaphore, racing with a concurrent keyring_restrict() that installs the restriction while holding the semaphore in write mode. Move the check to after __key_link_lock(), so it is done under the semaphore, matching the pattern used in __key_create_or_update().
-
CVE-2026-99256
In the Linux kernel, the following vulnerability has been resolved: dm cache: fix issue with background work locking dm cache used a rw_semaphore for background_work_lock. Write locks on rw_semaphores have strict owner semantics, but there was no guarantee that the process that locked background_work_lock was the same process that unlocked it. This can be easily seen using a kernel compiled with CONFIG_DEBUG_RWSEMS. Given a dm cache device <cache>, run: 'dmsetup suspend <cache> && dmsetup resume <cache>'. This will trigger a kernel warning: DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)) triggered by cache_resume(). To fix this, switch from a rw_semaphore to a spinlock and a wait queue. dm cache already has a wait queue and associated counter, migration_wait and nr_allocated_migrations, that was getting woken up when background work was getting completed, but wasn't actually used by anything. This is replaced by the background_work queue and counter.
-
CVE-2026-99254
In the Linux kernel, the following vulnerability has been resolved: io_uring: don't flood a cancelling task with task_work io_ring_exit_work() asks each task which has used the ring to remove its tctx node, by task_work, and repeats that until the list is empty. io_tctx_exit_cb() doesn't touch the node while the task is in io_uring_cancel_generic(), which removes all the nodes at its end. So the work item queues the callback again as soon as it has completed, for nothing. That is more than a waste of time. task_work_run() only returns when it finds the list empty. If the rings are released from inside the cancellation, because requests of other rings held the last references to their files, up to 64 work items keep sending callbacks to the one task which is running them. It never finds the list empty, never gets back to the cancellation, the nodes stay, and so it goes on: a task with 60 pairs of rings which poll each other ran 280000 callbacks in 5 seconds, 20 seconds after exit_group(). It ends when all the senders happen to be late at the same time. Until then the task keeps a CPU and the work items busy. An exiting task can't be killed meanwhile. execve() cancels the requests in the same way, so a live task can get stuck there as well, for minutes. If it takes more than five, the work items run into the WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No privilege is needed for any of this. If the callback has met a task in cancellation, wait a little before it is sent again. Nobody has to wake the work item up for that: either the node is gone by then, or it is the turn of the next round.
-
CVE-2026-99255
In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't hide a link from cancellations A task that exits cancels its tracked requests and waits until they are gone. io_uring_cancel_generic() looks everywhere a request can be, and goes to sleep if it found nothing to cancel. It is woken up each time one of the requests of the task is completed by task work or freed. When io-wq is done with a request that has a link, there is a time in which the next request of the link can't be found: io_worker_handle_work() io_assign_current_work(worker, NULL) io_wq_free_work(work) io_req_find_next() // takes the link off the request io_free_req() // task work for the task io_assign_current_work(worker, linked) io_run_task_work() cond_resched() worker->cur_work = linked It is not pending, it is not the current work of a worker, and it is not yet on the list that it is about to be parked on. If the pass that the exiting task makes because of io_free_req() falls into that time, it finds nothing and the task goes to sleep. The worker then runs the link, which IO_WQ_BIT_EXIT doesn't prevent for bounded work. If that parks the request nothing is completed or freed, and nobody wakes up the task. If it is the process that exits it can't be killed any more either. NOP, IOSQE_ASYNC | IOSQE_IO_LINK FUTEX_WAIT, FUTEX2_PRIVATE exit of the thread, or of the process, up to 63us later With four of these per round 5 to 8 of 10,000 rounds hang (4 CPUs, KVM): io_uring_cancel_generic do_exit Commit f8b632e89a10 ("io_uring: tighten task exit cancellations") is about the same gap, and makes the task look again for whatever happens before io_free_req(). Free the request once the link is the current work of the worker, or pending. Whoever is woken up by that can find the link, until it is parked where cancellations look as well. To do so split io_wq_free_work() in two.
-
CVE-2026-99244
In the Linux kernel, the following vulnerability has been resolved: pid_namespace: prevent TIF_NOTIFY_SIGNAL from interrupting the reaper Since commit 7fea700e04bd ("zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") zap_pid_ns_processes() clears TIF_NOTIFY_SIGNAL before every kernel_wait4() call. Otherwise kernel_wait4() doesn't sleep and returns -ERESTARTSYS if signal_pending() is true and the reaper busy-waits. But clearing TIF_NOTIFY_SIGNAL doesn't fix it. It can get raised again. For example, klp_send_signals() sets it raw against any task that hasn't transitioned yet. And it keeps sending it until the livepatch finishes. The sleep loop waiting for pid_allocated to drop has the same problem and it doesn't even clear anything. So a schedule() in TASK_INTERRUPTIBLE returns immediately. Use a no_notify_signal guard. signal_pending() will ignore TIF_NOTIFY_SIGNAL and the pid namespace reaper sleeps until a child exits or free_pid() wakes it.
-
CVE-2026-99258
In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Avoid using per-cpu output page in hv_apicid_to_vp_index() hv_apicid_to_vp_index() currently uses the per-cpu hypercall input and output pages. This function is called when running in VTL2 and when running in an SEV-SNP CoCo VM with no paravisor. In the former case, the output page is allocated, but in the latter case it is not, so the hypervisor stores the output VP index in memory that has not been allocated by the guest. Fix this by using the input page for both input and output. The hypercall has very small input and output, so sharing the same page for both is straightforward. An alternative fix is to allocate the per-cpu output page when running in an SEV-SNP CoCo guest, but this uses significantly more memory, particularly with larger vCPUs counts.
-
CVE-2026-99253
In the Linux kernel, the following vulnerability has been resolved: io_uring/cancel: rearm local work wake up before sleep io_uring_try_cancel_requests() sets ->cq_wait_nr to 1 so that the next io_req_local_work_add() wakes the cancelling task. The add that takes the count to zero is the only one that wakes, later ones see a count <= 0 and return. io_uring_cancel_generic() however only becomes TASK_INTERRUPTIBLE much later, so the one wake up can be spent on a running task. That is fine as long as the entry of that add is still queued, as the io_local_work_pending() check then skips the sleep. It is not if the add was delayed after queueing its entry: CPU0 (submitter in exec or exit) CPU1 (io_req_local_work_add) mpscq_push(req A) io_uring_try_cancel_requests() io_run_local_work() // runs req A io_uring_try_cancel_requests() atomic_set(&ctx->cq_wait_nr, 1) atomic_read(&ctx->cq_wait_nr) == 1 count taken, wake_up_state() // task is running, no-op prepare_to_wait(TASK_INTERRUPTIBLE) io_local_work_pending() == false schedule() mpscq_push(req B) cq_wait_nr <= 0, return Only the sleeping task can run req B, so it is stuck in execve() until a signal happens to wake it. An exiting task doesn't even get that. Arm the count again once the task state is set and before the work list is checked, for the rings whose local work this task is the one to run.
-
CVE-2026-99261
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: correct reservation fence slots for userq per-vm BOs eviction It fixes both the move overflow and the eviction fence add for evicting these per-vm BOs.
-
CVE-2026-99257
In the Linux kernel, the following vulnerability has been resolved: gpio: shared: gracefully handle no-device lookup of shared GPIOs We use platform lookup tables for shared GPIOs. This mechanism needs a struct device to work so fwnode-based lookup with no device associated currently causes a NULL-pointer deference. Adding this functionality will require a larger rework and it has never worked anyway so add a check that allows the kernel to gracefully handle this situation with an error ahead of implementing that functionality as a new feature.
-
CVE-2026-99259
In the Linux kernel, the following vulnerability has been resolved: soc/tegra: pmc: Fix uninitialised clock rate For legacy 32-bit Tegra devices, the warning in the tegra_pmc_enter_suspend_mode() function is being triggered because the early_pmc->rate variable is never configured and hence, always 0. This issue started occurring after updating the PMC driver to create the PMC context dynamically which causes the 'rate' to be set in the new dynamic context, but missed updating the rate in the early PMC context. Fix this by initialising the early_pmc->rate variable for 32-bit Tegra devices when the rate for the PMC context is initialised. [[email protected]: move assignment to existing #ifdef block]
-
CVE-2026-99260
In the Linux kernel, the following vulnerability has been resolved: ntfs: fix resident conversion in ntfs_new_attr_flags When setting sparse/compressed flags on a resident attribute, the function skipped the resident-to-non-resident conversion and terminated.
-
CVE-2026-99249
In the Linux kernel, the following vulnerability has been resolved: pid_namespace: make zap_pid_ns_processes() freezable When the init of a pid namespace exits, zap_pid_ns_processes() waits until all other pids in the namespace are freed. A tracer outside the namespace that does not reap its traced zombies keeps those pids allocated, so this wait has no upper bound, and while it lasts every suspend attempt fails: Freezing user space processes failed after 20.006 seconds (2 tasks refusing to freeze, wq_busy=0): Neither wait is freezable. The first loop sleeps in do_wait(), which returns -ERESTARTSYS on the freezer's fake signal; the loop then clears TIF_SIGPENDING and waits again without ever freezing. The final loop sleeps in TASK_INTERRUPTIBLE, and since nothing clears TIF_SIGPENDING there, schedule() returns immediately after the first freeze attempt and the task spins until the wait ends. Sleep in TASK_INTERRUPTIBLE | TASK_FREEZABLE in do_wait(), so that the freezer can freeze tasks waiting there directly, and in TASK_IDLE | TASK_FREEZABLE in the final loop, like coredump_task_exit() does. This was hit with Chromium-based browsers: crashpad ptrace-attaches the threads of a crashed renderer, which is a pid namespace init, and does not reap those killed during the dump.
-
CVE-2026-99250
In the Linux kernel, the following vulnerability has been resolved: printk: Postpone kthread startup There have been various bug reports related to SMP systems hanging on boot. The reports vary but seem to have some overlap with regard to missed IPI's during SMP setup. The reports also show that reverting NBCON console usage allows the bugs to disappear. The NBCON kthreads for console printing are started very early during boot using early_initcall(). Since these kthreads are asynchronously enabling/disabling interrupts during early boot, they may be interfering with early SMP setup on some hardware platforms. Starting the console printing kthreads later has shown to avoid the hanging on systems that could previously reproduce the issue. Postpone kthread starting until after all arch initcalls have completed.
-
CVE-2026-99248
In the Linux kernel, the following vulnerability has been resolved: i2c: xiic: restore non-managed runtime PM to fix clk WARN flood The devres conversion replaced manual pm_runtime_enable()/disable() with devm_pm_runtime_set_active_enabled() and dropped the remove-time runtime PM teardown. The managed release tears runtime PM down in the wrong order: it calls pm_runtime_dont_use_autosuspend() before pm_runtime_disable(), i.e. while runtime PM is still enabled, and devres is LIFO so the devm_clk_get_enabled() release runs afterwards. At remove(), pm_runtime_put_sync() leaves the device active with the autosuspend timer armed. Clearing use_autosuspend then makes rpm_idle() suspend immediately, and xiic_i2c_runtime_suspend() clk_disable()s the clock. The later devm_clk_get_enabled() release clk_disable_unprepare()s the already-disabled clock, so clk_core_disable() WARNs ("clkN already disabled") on every teardown. Drop the managed helper and restore the non-managed runtime PM setup and teardown, so runtime PM is enabled once in probe and disabled once in remove and the clock enable count stays balanced. Order the remove teardown so runtime PM is disabled before the usage count is dropped: pm_runtime_disable() followed by pm_runtime_put_noidle() instead of pm_runtime_put_sync(). Dropping the count first with autosuspend still enabled arms the autosuspend timer, and a preemption before pm_runtime_disable() lets it expire, suspend the device and clk_disable() the clock, which the devm release then disables again - the same WARN. Restore the non-managed IRQ request as well. The probe error paths now unwind runtime PM by hand via goto, and a devm-registered handler is only freed later during devres unwind, so it would stay live across the manual teardown (and across any future failing step added after it). Request the IRQ with request_threaded_irq() and free it explicitly in the probe error path and in remove. The probe error path also clears use_autosuspend, to match the teardown in remove().
-
CVE-2026-99234
In the Linux kernel, the following vulnerability has been resolved: tracing: Unregister field variable histograms when the command fails An action that names a field on another event needs that field as a variable, so create_field_var_hist() registers a second hist trigger on that event to provide it, and records it in target_hist_data->field_var_hists[]. If a later part of the same command fails, create_actions() returns an error and event_hist_trigger_parse() jumps to out_free. The write fails with -EINVAL and sched_switch gets no trigger, but: # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \ events/sched/sched_waking/trigger # echo 'my_synth u64 lat; int a; int b' >> synthetic_events # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\ onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\ >> events/sched/sched_switch/trigger # cat events/sched/sched_waking/trigger hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active] The second histogram is the one created for 'prio'. It is still active and still counting. out_free reaches destroy_field_var_hists(), which frees the field_var_hists[] entries, but never unregister_field_var_hists(), which is what removes the triggers and runs only from event_hist_trigger_free(). The entry is freed and the trigger is left with nothing tracking it. Unregister the field variable histograms in out_free as well, and record each one as soon as its trigger is registered rather than after the lookup that follows it, so no exit can leave a registered trigger untracked. The entry then belongs to field_var_hists[] and is released by destroy_field_var_hists(), so freeing it on that exit would be a double free.
-
CVE-2026-99226
In the Linux kernel, the following vulnerability has been resolved: keys: Avoid the owner account dereference in named keyring lookup Named keyring lookup must keep the storage containing the owner UID alive through the namespace mapping check. find_keyring_by_name() reads keyring->user->uid under keyring_name_lock, but that lock protects the keyring's name entry and allocation, not its separate key_user. A named session-keyring join can overlap a privileged KEYCTL_CHOWN on another CPU. If the keyring holds the last reference to its old dynamic key_user and the ownership transfer succeeds, the following ordering is possible: Named join Chown find_keyring_by_name() keyctl_chown_key() read_lock(keyring_name_lock) down_write(key->sem) load old keyring->user replace key->user and key->uid up_write(key->sem) key_put(key) key_user_put(old user): free read old user->uid read_unlock(keyring_name_lock) Chown neither takes keyring_name_lock nor key_session_mutex, so it can free the old account between the pointer load and the UID read. The lookup then reads freed memory even though the keyring itself is alive. Use keyring->uid for the mapping check. key_alloc() initializes this inline owner UID and keyctl_chown_key() updates it on chown. The existing name lock keeps its containing keyring allocated throughout the check, so lookup no longer depends on the account's lifetime. This also matches the owner UID used by the permission check. KASAN report as below: BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0 Read of size 4 at addr ffff8881128ae2ec by task keycase/500
-
CVE-2026-99222
In the Linux kernel, the following vulnerability has been resolved: keys: Protect the read method check against type removal keyctl_read_key() checks key->type->read without holding key->sem. A reference keeps the key alive, but does not pin the module containing its type. A surviving RxRPC key can therefore be read while AF_RXRPC is being unloaded: KEYCTL_READ task Module unload and key GC ---------------- ------------------------ lookup_user_key() permission / possession checks load key->type af_rxrpc_exit() unregister_key_type() GC: down_write(key->sem) GC: retype to key_type_dead GC: up_write(key->sem) unregister_key_type() returns free_module() read saved type's read member The final access can read freed module storage. The read invocation in __keyctl_read_key() is already protected by key->sem, but the earlier method check is outside that critical section. Move the method check into __keyctl_read_key(), after key_validate() and under its existing read hold on key->sem. The check and invocation then use the same protected type for length queries and every read retry. The GC cannot retype the key until the semaphore is released, and type unregistration waits for that GC pass before the module can be freed. Return -EOPNOTSUPP when validation succeeds and the type has no read method. A temporary buffer may now be allocated before this result; allocation and copying to userspace remain outside the semaphore.
-
CVE-2026-99223
In the Linux kernel, the following vulnerability has been resolved: keys: make keyring indexes independent of kernel addresses KEYCTL_READ returns the serial numbers in a keyring in associative-array traversal order. The first word of the index is a public, deterministic hash of the type pointer, domain pointer and description. An unprivileged user can therefore insert keys with known descriptions, predict their order for each possible KASLR slide, and recover the kernel image address. On an x86-64 build with 16 MiB alignment, 45 user keys suffice to distinguish the candidate slides. Remove the addresses from the whole index, not just its first hash word. Assign each key type and domain a nonzero 64-bit ID and hash those IDs and the description with a once-initialized SipHash key. Use the full IDs in the later index chunks as well. Truncating or hashing the IDs there would lose the guarantee that distinct type/domain/description tuples have a differing index bit. Allocate IDs lazily since private key types need not be registered. Cache them in the index key so tree walks and copies of an existing index do not need to dereference a type descriptor that may have been unregistered. Keep the 32-bit chunk layout and diff_objects() bit offsets consistent, and retain the separate root slot for keyrings used by recursive search. The key comparison, permissions and userspace data format are unchanged; only the address-dependent in-memory ordering is replaced.
-
CVE-2026-99221
In the Linux kernel, the following vulnerability has been resolved: keys/trusted_keys: return immediately after TPM unseal failure trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation fails. If pcrlock() succeeds, its return value overwrites the unseal error, causing key instantiation to succeed. Return immediately when unseal fails to preserve the original error.
-
CVE-2026-99219
In the Linux kernel, the following vulnerability has been resolved: ftrace: Initialize modname and offset in print_rec() print_rec() leaves 'modname' and 'offset' uninitialized and kallsyms_lookup() only sets them on success. When the lookup fails like when a module is being loaded or unloaded, 'modname' holds a garbage value, passes the 'if (modname)' check, and is dereferenced by seq_printf(). Oops: general protection fault RIP: 0010:string+0x48/0xe0 Call Trace: vsnprintf+0x1f5/0x650 seq_printf+0x8e/0xb0 print_rec+0x6c/0xc0 t_show+0x4c/0x440 seq_read_iter+0x119/0x480 This can be triggered by reading available_filter_functions while a module is being loaded or unloaded. Initialize both variables so a failed lookup skips the module name.
-
CVE-2026-99228
In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't lose the signal that ends work When a thread exits, only its tracked requests are cancelled. Then its io-wq is torn down. io_wq_exit_workers() signals every worker, to get it out of an interruptible sleep, and waits for all of them to exit. Before they do, they go through the work that is left. Unbounded work is cancelled. Bounded work is run, as it is expected to end by itself. Not all of it does. An open has no file yet, so it counts as bounded, and the open of a FIFO waits for the other end. That is what the signal is for. But the workers are signalled once, and a worker that hasn't started the work by then loses the signal: io_wq_exit_workers() io_worker_handle_work() io_wq_worker_wake() set TIF_NOTIFY_SIGNAL io_assign_current_work() io_run_task_work() clear TIF_NOTIFY_SIGNAL io_wq_submit_work() fifo_open() wait_for_partner() wait_for_completion_timeout() The thread never gets out of do_exit(): IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC exit of the thread that has submitted it hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is killed. Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT set. The bit is set before the workers are signalled, and it is tested after the flag has been cleared, with clear_notify_signal() providing the barrier. So either the flag stays, or the bit is seen. Work that is started while the io-wq exits is treated like work that is being run at that time: it isn't interrupted unless it waits interruptibly.
-
CVE-2026-99240
In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: error damos_commit_quota_goal() for zero target_value Patch series "mm/damon: move zero damos quota target_value handling to the core layer". Having zero DAMOS quota target value can cause division by zero. DAMON API callers are checking the target value parameters to avoid that. It is easy to make mistakes in some of the multiple API callers. Move that to the core layer. Patch 1 adds the corner case handling into the core layer DAMON parameters validation logic. Patches 2 and 3 remove no more needed DAMON API callers side handling of the corner case in DAMON_LRU_SORT and DMON_SAMPLIE_MTIER, respectively. This patch (of 3): If a DAMOS scheme has a damos_quota_goal of zero target_value, damos_quota_goal() could trigger division-by-zero error. Hence each DAMON API callers should do the zero target_value validation. It is easy to make mistakes. Actually such bugs in DAMON_LRU_SORT and DAMON_SAMPLE_MTIER were found and fixed [1]. It is better to handle the corner case only once in the core layer, instead of multiple places in all DAMON API callers. One straightforward option is using an alternative denominator for the corner case in the damos_quota_goal(). However, the zero target_value is meaningless. In this case, the quota goal is always evaluated as achieved or over-achieved. The quota will only keep being reduced. Simply avoid using zero target_value by adding a check in the core layer DAMOS quota goal parameters validation/commit path, damos_commit_quota_goal(). Update it to return an error in the case. Also update its caller to propagate the error.
-
CVE-2026-99230
In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd: don't leave list poison in ->hash_node io_uring_cmd_del_cancelable() uses hlist_del() to take a command off ->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in ->hash_node. Requests are recycled through the request cache without being reinitialised, and not every user of ->hash_node sets it up before it is used: If a vectored futex wait is woken while futex_wait_multiple_setup() is still queueing the futexes, io_futexv_wait() doesn't add the request to ->futex_list, and leaves the completion to the task_work queued by the wake up. io_futexv_complete() ends in __io_futex_complete(), whose hlist_del_init() is fine for a request that is unhashed, which is how all other users of the node leave it. If the request was a cancelable uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through LIST_POISON2: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-access in range [0xdead000000000120-...] RIP: 0010:io_futexv_complete+0x219/0x420 Call Trace: tctx_task_work_run+0x804/0x950 tctx_task_work+0x71/0xa0 task_work_run+0x118/0x200 Leave the node unhashed.
-
CVE-2026-99232
In the Linux kernel, the following vulnerability has been resolved: tracing/syscalls: Use copy_from_user for the faultable syscall buffer syscall_copy_user_array() copies the buffer argument of faultable syscalls (write, pwrite64, ...) with __copy_from_user(), which skips access_ok(). Use copy_from_user() instead so a non-user address is rejected and the entry is recorded as faulted. It could be a security concern for machines that trust perf a bit too much.
-
CVE-2026-99241
In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_filemap_page_mkwrite() ntfs_filemap_page_mkwrite() calls iomap_page_mkwrite() without holding mapping->invalidate_lock, so a concurrent truncate or fallocate can be in the middle of invalidating pagecache and rewriting the runlist while the write fault maps blocks and dirties the folio. This races with ntfs_attr_fallocate(), which merges clusters into the in-memory runlist, drops the runlist lock, and only afterwards zeroes the newly allocated clusters on disk; and with the punch-hole/insert/collapse paths that free clusters after truncating the cache. Per Documentation/filesystems/locking.rst, ->page_mkwrite() must ensure there are no truncate/invalidate races, "usually mapping->invalidate_lock is suitable for proper serialization". xfs takes its mmaplock (= the invalidate_lock rwsem) shared in exactly this path. Take invalidate_lock shared around iomap_page_mkwrite(). The read-only fault path is already covered because filemap_fault() itself grabs invalidate_lock shared on instantiation/read paths; only page_mkwrite was bypassing it in this driver.
-
CVE-2026-99220
In the Linux kernel, the following vulnerability has been resolved: asymmetric_keys: reject trust keys without IDs The PKCS#8 parser deliberately leaves the asym_key_ids payload slot empty. key_or_keyring_common() unconditionally dereferences that slot when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the plain and :chain forms reach this branch, allowing an unprivileged caller to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING followed by add_key(). Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279) Call Trace: <TASK> __key_create_or_update (security/keys/key.c:884) key_create_or_update (security/keys/key.c:1021) __do_sys_add_key (security/keys/keyctl.c:134) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Kernel panic - not syncing: Fatal exception Reject an asymmetric restriction key without key IDs. A PKCS#8 private key cannot identify the signer of a candidate certificate and is not a valid trust anchor.
-
CVE-2026-99176
In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails in the "not from VM-Entry" case, i.e. when emulating RSM or handling KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM trying to run L1 with a nested MMU, and is especially problematic if the vCPU manages to free its nested state before the VM crashes. Constructing the root for a nested EPT MMU goes through vmcs12, which is dynamically allocated/freed when nVMX is enabled/disabled. And so if the nested state is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL pointer deref when attempting to get L1=>L2 EPTP. BUG: kernel NULL pointer dereference, address: 0000000000000078 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel] Call Trace: <TASK> kvm_mmu_load+0xcd/0x870 [kvm] kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x9c/0x4d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x47491b </TASK> Modules linked in: kvm_intel kvm irqbypass CR2: 0000000000000078 ---[ end trace 0000000000000000 ]--- RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel] [sean: write changelog]
-
CVE-2026-99181
In the Linux kernel, the following vulnerability has been resolved: autofs: ignore notification errors from a replaced pipe autofs_notify_daemon() takes a reference to the current notification pipe under wq_mutex, then drops the mutex before writing the request. The write can block while the daemon enters catatonic mode and installs a replacement pipe. If the old pipe's reader is then closed, the delayed write returns -EPIPE and the generic error path enters catatonic mode again. That transition acts on the current superblock state, closes the replacement pipe, and releases the new daemon generation's wait queues. Only enter catatonic mode when the pipe which failed is still the current pipe. Factor the already-locked transition so the identity check and state change are atomic with respect to another replacement. This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest. An unprivileged UID 65534 lookup filled the old packet pipe before a normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe received HUP and both a pending victim lookup and a later lookup failed with ENOENT in two out of two fresh-mount runs. With this change, the new pipe remained active, received an intact 304-byte request, and both victim lookups completed in two out of two runs. Normal lookup and restart-without-a-blocked-writer controls passed. No KASAN, oops, refcount, or lock diagnostic was observed. A source reproducer and complete local logs are available privately on request. The demonstrated impact is limited to denial of a shared autofs service during a legitimate daemon restart. No memory corruption, information leak, privilege escalation, or code execution primitive was observed.
-
CVE-2026-99161
In the Linux kernel, the following vulnerability has been resolved: i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe() In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any subsequent operation fails or when the module is unloaded, the clock reference count is never decremented via clk_put(), leading to a resource leak. Switch to devm_clk_get() so that the clock is automatically managed and released.
-
CVE-2026-99128
In the Linux kernel, the following vulnerability has been resolved: sctp: validate chunk length in the inqueue parser SCTP chunks always include a four-byte generic header, but sctp_inq_pop() currently accepts shorter declared lengths. A zero-length chunk leaves chunk_end at the current header. When ASCONF is covered by the association's SCTP-AUTH policy, sctp_assoc_bh_rcv() can continue before the state machine performs its normal chunk-length check. sctp_inq_pop() then returns the same malformed chunk repeatedly and the receive softirq can lock up. A remote SCTP peer can trigger this after establishing an association on a kernel built with CONFIG_IP_SCTP and configured with net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did not require application credentials, a shared SCTP AUTH key, or net.sctp.addip_noauth_enable=1. On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"), one zero-length ASCONF caused repeated watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger health probes succeeded, while 36 of 37 post-trigger probes failed. With this change, all 37 post-trigger probes succeeded and no equivalent soft-lockup signature appeared. Reject chunks shorter than the generic SCTP header at the shared inqueue parser boundary. Mark the packet for discard before either caller can continue processing it, while preserving the four-byte generic minimum. Declared-length 1 through 4 controls and kernel-generated ASCONF traffic remained healthy. The patched sctp_hello selftest passed for IPv4 and IPv6. The complete private reproducer and validation evidence are available directly to maintainers on request.
-
CVE-2026-99118
In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Harden DMC firmware payload parsing Validate the conversion of the DMC firmware size from dwords to bytes using check_mul_overflow() before calculating the firmware payload size. Reject zero-length payloads and zero MMIO counts in the DMC firmware header so malformed firmware is caught early. Also set dmc_fw_size only after the payload allocation succeeds. (cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef)
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.