CVE-20XX-?
agent?

No fix yet.

CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.

1,027 CVEs · updated 2026-11-20 21:26 UTC

Reset all
  1. CVE-2026-99389

    In the Linux kernel, the following vulnerability has been resolved: smb: server: size directory name conversion buffer correctly A 2048-byte ASCII directory name needs 4098 bytes when converted to UTF-16, including the terminator. ksmbd_convert_dir_info_name() caps its allocation at PATH_MAX and writes past the end of that buffer. Allocate space for one UTF-16 code unit per input byte plus the terminator. Use kmalloc_array() to check the size calculation.

    Memory safety OS & kernel Linux

    unscored No fix listed
  2. CVE-2026-99393

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't overrun incore inode when cleaning attr forks LOLLM noticed that xrep_dinode_check_afork doesn't check for a di_forkoff value that is so large that the attr fork would begin after the end of the inode space. This causes afork_{ptr,size} to be nonsense. What we really ought to do here is zap the attr fork.

    Memory safety OS & kernel Linux

    unscored No fix listed
  3. CVE-2026-99395

    In the Linux kernel, the following vulnerability has been resolved: xfs: bound inode fork length against the fork size during log recovery xlog_recover_inode_commit_pass2() copies an inode log item's data/attr fork region into the inode buffer using the on-log region length without bounding it against the fork capacity, e.g.: len = item->ri_buf[2].iov_len; memcpy(XFS_DFORK_DPTR(dip), src, len); The only guard is an ASSERT, which is a no-op on production kernels (CONFIG_XFS_DEBUG off), and xfs_dinode_verify() runs only after the copy. A crafted image with a dirty log can therefore drive a heap out-of-bounds write at mount time. The XFS_ILOG_DBROOT sibling already passes XFS_DFORK_DSIZE as a bound; the DDATA/DEXT and ADATA/AEXT memcpy paths did not. Bound each logged fork region against the destination fork size before copying it, and reject the log item with -EFSCORRUPTED when it does not fit. Because the recovered inode is only verified after the fork data has been copied in, the checks are done up front, before any memcpy into the on-disk inode.

    Memory safety OS & kernel Linux

    unscored No fix listed
  4. CVE-2026-99381

    In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short or out-of-range FIND response parameters CIFSFindFirst() and CIFSFindNext() read the SearchHandle, SearchCount, EndofSearch and LastNameOffset of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response at ParameterOffset. validate_t2() bounds the offset at 1024 and ParameterCount below 512, and nothing compares them with the number of bytes SendReceive() copied into the buffer or with the size of the response parameters. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response with a ParameterOffset past its end has the search handle, the entry count, the end-of-search flag and the last-entry offset read out of the request that was just sent, or out of whatever the allocation held before, and a ParameterCount smaller than the parameters has them read past the end of the parameter block. The reads stay inside the allocation, but what they return is not part of the response, and CIFSFindFirst() then hands back a search handle the server never sent. That handle is sent back to the server in the next FIND_NEXT2 or FIND_CLOSE2, so two bytes of the buffer leak at an offset the server picks. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose parameter area is smaller than the response parameters or extends past the received length, returning smb_EIO2() with a new smb_eio_traces value for each of the two responses, like the other response checks this file gained since v6.19. Backports to trees before v6.19 need smb_EIO2() replaced with -EINVAL and the trace.h hunk dropped. A conforming server is not affected. The parameter block of a transaction response is part of the SMB, so ParameterOffset + ParameterCount cannot exceed the smbCalcSize() bytes that SendReceive() copies, and the response parameters are 10 bytes for FIND_FIRST2 and 8 bytes for FIND_NEXT2, which is what T2_FFIRST_RSP_PARMS and T2_FNEXT_RSP_PARMS hold. This patch depends on "smb: client: reject FIND data areas that run past the received response", whose declarations it extends.

    Memory safety OS & kernel Linux

    unscored No fix listed
  5. CVE-2026-99382

    In the Linux kernel, the following vulnerability has been resolved: smb: client: reject FIND data areas that run past the received response CIFSFindFirst() and CIFSFindNext() take the directory entries of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response from DataOffset for DataCount bytes. validate_t2() bounds DataOffset at 1024 and ParameterCount + DataCount by the byte count, and nothing compares DataOffset + DataCount with the number of bytes SendReceive() copied into the buffer. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response whose data area extends past its end has srch_entries_start point at bytes of the request that was just sent, or at whatever the allocation held before, and those bytes are parsed as directory entries. cifs_readdir() and find_cifs_entry() walk the entries with nxt_dir_entry(), which checks every entry but the first of a response against the end of the SMB; cifs_query_path_info() and cifs_backup_query_path_info() read the first entry with no check at all. Those reads stay inside the allocation, but what they return is not part of the response. The last entry, which LastNameOffset locates relative to the data area, is bounded against the received response by an earlier patch of this series, as is every entry that cifs_fill_dirent() parses; the walk itself and the two query functions are not. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose data area extends past the received length, with the -EINVAL that validate_t2() returns for the other malformed transaction responses. cifs_query_path_info() and cifs_backup_query_path_info() still read a whole entry from a data area that may be smaller than one; that is not changed here. A conforming server is not affected. The data block of a transaction response is part of the SMB, so DataOffset + DataCount cannot exceed the smbCalcSize() bytes that SendReceive() copies; coalesce_t2() appends each secondary response to the data area and adds its length to both DataCount and the byte count, which keeps that relation.

    Memory safety OS & kernel Linux

    unscored No fix listed
  6. CVE-2026-99384

    In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read of the resume name sent in TRANS2_FIND_NEXT2 cifs_fill_dirent() reads the fixed part of a directory entry and the name length it holds, or for SMB_FIND_FILE_UNIX scans the name for its terminating NUL, without knowing where the response ends. cifs_save_resume_key() calls it for the entry at the LastNameOffset the server chose, after every FindNext and after the FindFirst of a search rewind, and records the name it returns as the resume name of the search without bounding it; the next CIFSFindNext() copies up to PATH_MAX - 1 bytes from that name into its request and sends them to the server. cifs_filldir() bounds the name against the end of the response since commit f8cf09a53a0d ("smb: client: bound dirent name against end of SMB response in cifs_filldir"), but only after cifs_fill_dirent() has read the entry, and nxt_dir_entry() checks the entries it walks only against sizeof(FILE_DIRECTORY_INFO), for every level but SMB_FIND_FILE_INFO_STANDARD, and never sees the first entry of a response. Bounding where last_entry starts, as the preceding patch does, does not bound the read. A last entry that starts within the final bytes of the response still has its fixed part read past the end of the received data, and the name length it declares, a __le32 for every level but SMB_FIND_FILE_INFO_STANDARD and SMB_FIND_FILE_UNIX, is recorded without being checked against anything. CIFSFindNext() rejects only a length of PATH_MAX or more, then copies the name, up to 4095 bytes, into its request and sends it, and as the report below shows that copy can run past the end of the cifs_request allocation that holds the response. For SMB_FIND_FILE_UNIX the name is in addition scanned for its terminating NUL over up to PATH_MAX + 1 UTF-16 units, or PATH_MAX bytes, before any check. The FindNext that carries the name is only sent by the SMB1 dialect, which is not negotiated by default; reaching it requires an explicit vers=1.0 mount. With KASAN enabled, a response whose last entry declares a name longer than the bytes that follow it gives: ================================================================== BUG: KASAN: slab-out-of-bounds in CIFSFindNext+0x8ca/0x14c0 Read of size 4080 at addr ffff88807c823f98 by task ls/83 CPU: 0 UID: 0 PID: 83 Comm: ls Not tainted 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Call Trace: <TASK> kasan_report+0xdf/0x1a0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 CIFSFindNext+0x8ca/0x14c0 cifs_readdir+0xf51/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 1 at 13.497119s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address belongs to the object at ffff88807c820000 which belongs to the cache cifs_request of size 16588 The buggy address is located 16280 bytes inside of allocated 16588-byte region [ffff88807c820000, ffff88807c8240cc) ================================================================== The read is the memcpy() that copies the recorded name into the next request, so those bytes go to the server. Pass the end of the response to cifs_fill_dirent() and have it reject an entry whose fixed part does not fit or whose name extends past the end, before either is used, so that both callers are covered; cifs_save_resume_key() computes the end the same way cifs_readdir() does. The name bound compares the bytes left between the name and the end with the name length rather than adding the length to the name pointer, since the length is a 32-bit value taken from the entry and the sum could wrap on 32-bit systems. cifs_fill_dirent() is also used on the SMB2 readdir path; there smb2_parse_query_directory() has already checked every entry against the end of the response, so a vali ---truncated---

    Memory safety OS & kernel Linux

    unscored No fix listed
  7. CVE-2026-99385

    In the Linux kernel, the following vulnerability has been resolved: smb: client: fix buffer overflow in SMB2_tcon() In SMB2_tcon(), unc_path is allocated with a fixed buffer size of MAX_SHARENAME_LENGTH * 2 bytes (672 bytes). However, the user-controlled UNC path (tree) length is passed to cifs_strtoUTF16(), which assumes the destination buffer is large enough and writes strlen(tree) + 1 UTF-16 code units. Commit 62a1a439e0fd ("cifs: clean up handling of unc= option") removed the length check on UNC mount options, allowing mount paths to exceed MAX_SHARENAME_LENGTH while retaining the fixed-size buffer allocation in SMB2_tcon(). Consequently, an oversized UNC string causes cifs_strtoUTF16() to write past the end of the heap object, resulting in a slab-out-of-bounds write. Furthermore, if a tree exceeds MAX_TREE_SIZE characters, strscpy() truncates it in cifs_tcon::tree_name, causing subsequent reconnects or failovers to fail. Fix this by first verifying that the length of tree does not exceed MAX_TREE_SIZE, returning -EINVAL if it does. Then, dynamically allocate unc_path based on the length of tree so that it safely accommodates all UTF-16 code units for paths within MAX_TREE_SIZE. [pc: remove unused MAX_SHARENAME_LENGTH]

    Memory safety OS & kernel Linux

    unscored No fix listed
  8. CVE-2026-99386

    In the Linux kernel, the following vulnerability has been resolved: smb: client: don't resurrect an exiting tcon from cached dir workers cfids_laundromat_worker() bumps tcon->tc_count for every expired open cfid and queues cached_dir_offload_close() without checking whether the tcon is already being torn down. Racing with the final cifs_put_tcon(), the tcon comes back from zero and gets torn down twice: T1 T2 cifs_put_tcon() --tc_count == 0, TID_EXITING tconInfoFree() free_cached_dirs() cancel_delayed_work_sync() cfids_laundromat_worker() ++tc_count == 1 queue_work(serverclose_wq) kfree(tcon->origin_fullpath) kfree(tcon) cached_dir_offload_close() close_cached_dir() [UAF] cifs_put_tcon() tconInfoFree() [double free] cached_dir_lease_break() also bumps tc_count without tc_lock, racing with the laundromat's locked update. Take the tcon reference through a helper that refuses once the tcon is TID_EXITING or its refcount has dropped to zero. Queued put_work and close_work then always hold a tcon reference, so tconInfoFree() can't run before they finish and free_cached_dirs() doesn't need to flush any workqueue. If the laundromat can't get a reference, put the cfid back on the dying list for free_cached_dirs() to free; its handle goes away with the tree connection. The lease break path finds the tcon on ses->tcon_list under cifs_tcp_ses_lock, so it can't see TID_EXITING, but it now takes tc_lock.

    Memory safety OS & kernel Linux

    unscored No fix listed
  9. CVE-2026-99387

    In the Linux kernel, the following vulnerability has been resolved: smb: client: bound POSIX lock data area by response length CIFSSMBPosixLock() receives a TRANS2 response whose server-provided DataOffset and DataCount are not required by validate_t2() to describe an interval inside the response. A server can therefore make the client read a cifs_posix_lock beyond the response buffer and return those kernel bytes through F_GETLK. Use smbCalcSize() to obtain the full response length after any multipart TRANS2 reassembly, then reject data areas that extend past it before dereferencing them.

    Memory safety OS & kernel Linux

    unscored No fix listed
  10. CVE-2026-99377

    In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: bound the CB_NOTIFY_DEVICEID array count before allocating decode_devicenotify_args() hands the server's notification count straight to kmalloc_objs() as the array length, without checking it against the message that carried it. Bound it the way nfs4xdr.c bounds an attribute length, against xdr_stream_remaining().

    Memory safety OS & kernel Linux

    unscored No fix listed
  11. CVE-2026-99379

    In the Linux kernel, the following vulnerability has been resolved: smb: client: validate SMB1 EA list bounds before parsing CIFSSMBQAllEAs() checks the server-provided EA list length by adding it to the response pointer. On 32-bit systems, a positive length can wrap the pointer and pass the comparison. The parser then walks outside the received response while reading the next FEA header. A response with a list length of 0x40000000 reproduces this as a native i386 page fault and kernel panic from listxattr() against an SMB1 server. Check that the EA list starts within the SMB byte area before reading its header. Keep its length unsigned and compare it with the bytes left in the response without pointer addition. SMB1 is not negotiated by default and requires an explicit vers=1.0 mount.

    Memory safety OS & kernel Linux

    unscored No fix listed
  12. CVE-2026-99364

    In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix out-of-bounds read in the rpc_status dump nfsd_nl_rpc_status_get_dumpit() loads args->opcnt and args->ops separately, then walks ops[] before rechecking rq_status_counter. A COMPOUND that completes between the two loads runs nfsd4_release_compoundargs(), which zeroes opcnt and points ops back at the eight-entry inline array. A dump that already sampled an opcnt of 200 clamps it to the sixteen slots in rq_opnum, then indexes iops[0..15]. iops is the last member of struct nfsd4_compoundargs and rq_argp is allocated at exactly that size, so the walk runs off the end of the allocation. The trailing recheck discards the sampled data, but the read has already happened. NFSD_CMD_RPC_STATUS_GET carries no GENL_ADMIN_PERM, so an unprivileged local user can repeat the dump against a busy server until it lands in the window. Sample opcnt and ops into locals, then finish the counter recheck before dereferencing ops. An unchanged counter means both came from the same COMPOUND, where opcnt cannot exceed what ops holds.

    Memory safety OS & kernel Linux

    unscored No fix listed
  13. CVE-2026-99367

    In the Linux kernel, the following vulnerability has been resolved: NFSD: Don't complete a cld upcall the daemon has not read cld_pipe_downcall() matches a reply to its upcall on the xid alone. A write that arrives before the daemon has read that upcall completes __cld_pipe_upcall() while its struct rpc_pipe_msg is still queued on the pipe. The waiter returns, its stack frame goes away, and the pipe keeps a list_head that points into it. The next rpc_queue_upcall() walks that pointer: BUG: KASAN: vmalloc-out-of-bounds in __list_add_valid_or_report Read of size 8 at addr ffffc90007027950 by task syz.0.96/13066 __list_add_valid_or_report+0x6a/0x130 rpc_queue_upcall cld_pipe_upcall nfsd4_cld_grace_start nfsd4_cld_tracking_init The pipe is mode 0600 in rpc_pipefs, so the trigger is a broken or hostile nfsdcld rather than an unprivileged task. Record whether the daemon has consumed the whole message and complete only when it has. cld_pipe_destroy_msg() runs on every path by which the pipe releases a message, so it can maintain that flag under cn_lock. nfsdcld sends its -EINPROGRESS downcalls only after reading the upcall, so the new check does not break the GraceStart record stream.

    Memory safety OS & kernel Linux

    unscored No fix listed
  14. CVE-2026-99362

    In the Linux kernel, the following vulnerability has been resolved: nfsd: preflight SEQUENCE replies before accepting a slot nfsd4_sequence() narrows the reply buffer to the session's cached reply limit before it accepts the slot seqid. A client may negotiate ca_maxresponsesize_cached down to NFSD_MIN_HDR_SEQ_SZ, and nfsd4_alloc_slot() then gives every slot a zero-length sl_data[]. A COMPOUND tag can fill that narrowed buffer until it holds the SEQUENCE opcode but not the status word that follows. nfsd4_encode_operation() returns without running nfsd4_encode_sequence(), so cstate.data_offset stays zero. It leaves op->status at nfs_ok as well, so the COMPOUND is treated as having succeeded. nfsd4_store_cache_entry() declines to cache a lone SEQUENCE that returned an error. That test reads the status the operation reported, so it passes here. The copy starts at offset zero and takes the whole reply, RPC and COMPOUND headers included, into the zero-length sl_data[]. The COMPOUND tag is copied along with it, so the client picks most of the bytes written past the end of the slot: BUG: KASAN: slab-out-of-bounds in read_bytes_from_xdr_buf+0x1bc/0x390 Write of size 80 at addr ffff888003a549cd by task kunit_try_catch/24 __asan_memcpy+0x38/0x60 read_bytes_from_xdr_buf+0x1bc/0x390 nfsd4_sequence_done+0x5b0/0x810 nfs4svc_encode_compoundres+0x1bf/0x240 Check that the fixed-size SEQUENCE result, plus room for a following operation's error status, fits the negotiated limit before narrowing the buffer and consuming the slot seqid. The slot and its reply cache are left unchanged, as RFC 8881 Section 2.10.6.1.2 requires of an error returned from SEQUENCE.

    Memory safety OS & kernel Linux

    unscored No fix listed
  15. CVE-2026-99355

    In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix oversized GSS proxy token copy gss_read_proxy_verf() allocates one page per token chunk, but it copies the entire linear head of an RPC request into in_token->pages[0]. A UDP datagram can leave more than PAGE_SIZE bytes in the linear head, so a large RPCSEC_GSS INIT token overwrites following pages. Copy the linear head in page-sized chunks before switching to the request page array. The linear head itself can span multiple pages.

    Memory safety OS & kernel Linux

    unscored No fix listed
  16. CVE-2026-99340

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Take SRCU in kvm_zap_gfn_range() kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to reschedule. Callers that do not already hold kvm->srcu (or slots_lock) can race with memslot deletion: synchronize_srcu_expedited() does not wait, kvm_free_memslot() frees the old slot and its rmap, and the zap resumes on freed memory. The VFIO noncoherent-DMA path hits this by zapping the entire GPA space without SRCU. KASAN reported: BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0 Read of size 8 at addr ffffc900005c1008 Call Trace: slot_rmap_walk_next+0x82/0x1c0 __kvm_rmap_zap_gfn_range+0x17a/0x280 kvm_zap_gfn_range+0x2a6/0x6a0 kvm_vfio_set_attr+0x576/0x770 kvm_device_ioctl+0x1ff/0x3b0 Take SRCU inside kvm_zap_gfn_range() so every caller is covered. Nesting with an existing kvm->srcu critical section is fine; the helper uses a local index. Drop the now-redundant SRCU pair from __kvm_set_or_clear_apicv_inhibit().

    Memory safety OS & kernel Linux

    unscored No fix listed
  17. CVE-2026-99347

    In the Linux kernel, the following vulnerability has been resolved: ALSA: x86: hdmi: fix chmap array missing terminator entry had_build_channel_allocation_map() allocates a single struct snd_pcm_chmap_elem via kzalloc() and stores it as intelhaddata->chmap->chmap. struct snd_pcm_chmap.chmap is expected to be a zero-terminated array (see snd_pcm_std_chmaps[]), but had_register_chmap_ctls() never overrides the TLV callback installed by snd_pcm_add_chmap_ctls(), so the generic pcm_chmap_ctl_tlv() from ALSA core is left in place. pcm_chmap_ctl_tlv() is reachable by any local user via SNDRV_CTL_IOCTL_TLV_READ on the "Playback Channel Map" control and walks the array with "for (map = info->chmap; map->channels; map++)". Since the driver's single element is never terminated, this walks past the allocation. The same pointer is also freed on hot-unplug and rebuilt on hot-plug under intelhaddata->mutex, while the TLV callback runs under card->controls_rwsem without that mutex, so the walk can also race a concurrent free of the array. Fix this by allocating a second, zeroed element so the array is properly terminated, and by dropping the inherited TLV callback entirely at registration time, since the driver never implements one of its own.

    Memory safety OS & kernel Linux

    unscored No fix listed
  18. CVE-2026-99332

    In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix out-of-bounds left shift by 32 in s32ton() Syzbot reported an out-of-bounds shift (32-bit integer shifted left by 32) in the s32ton() routine in the HID core. This routine converts a signed 32-bit integer to a signed n-bit integer, and it caps the value of n at 32. But when n == 32 there's no need to do anything; it can simply return the input value. This will avoid calculating (1 << n) when n is 32, which was the cause of the invalid shift.

    Memory safety OS & kernel Linux

    unscored No fix listed
  19. CVE-2026-99324

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read when padding the final compound response Compound response handling pads the last response of a compound to an 8-byte boundary by growing the final iov and the RFC1002 length. smb2_allocate_rsp_buf() allocates exactly response_sz. A command can fill the response buffer to within 7 bytes of its end, for example a QUERY_INFO whose output is bounded only by the space left. The padding can then run past the allocation, and ksmbd_tcp_writev() reads those bytes when it sends the response. BUG: KASAN: slab-out-of-bounds in _copy_from_iter+0x744/0x10e0 Call Trace: _copy_from_iter+0x744/0x10e0 tcp_sendmsg_locked+0x2290/0x3f80 ksmbd_tcp_writev+0x10c7/0x1ab0 [ksmbd] Allocate room for the padding when the request is a compound, as smb2_read() and smb2_read_pipe() do for their payloads. response_sz is unchanged, so commands still fill only up to it, and kvzalloc() zeroes the padding.

    Memory safety OS & kernel Linux

    unscored No fix listed
  20. CVE-2026-99327

    In the Linux kernel, the following vulnerability has been resolved: HID: roccat: kovaplus: reject short button reports The raw event callback runs before HID core validates and zero-pads the report. It passes the buffer to helpers which inspect data[0] and read a complete struct kovaplus_mouse_report_button for button reports. A truncated report can therefore cause an out-of-bounds read. Require enough data for the button report before calling either helper. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw-event length validation to hid-asus.

    Memory safety OS & kernel Linux

    unscored No fix listed
  21. CVE-2026-99330

    In the Linux kernel, the following vulnerability has been resolved: HID: mcp2200: validate READ_ALL response length The HID core invokes raw_event callbacks before validating the report length. mcp2200_raw_event() casts a READ_ALL response to struct mcp_read_all_resp and reads fields through offset ten without checking that the response contains the structure. A one-byte READ_ALL response reproduced the issue under KASAN: BUG: KASAN: slab-out-of-bounds in mcp2200_raw_event+0x24b/0x3a0 Read of size 1 by task hidtrigger/89 Call Trace: mcp2200_raw_event+0x24b/0x3a0 kasan_report+0x139/0x170 Reject an incomplete READ_ALL response with a protocol error before reading its fields. The common completion path then wakes the command waiter with the error instead of leaving it to time out. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus.

    Memory safety OS & kernel Linux

    unscored No fix listed
  22. CVE-2026-99314

    In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap() usb_stream_hwdep_mmap() reads us122l->sk.s and dereferences it without checking for NULL. The stream object is released by usb_stream_free(), which is reached through us122l_stop() both when the device is disconnected and when us122l_start() fails, and it leaves us122l->sk.s set to NULL. The hwdep file stays usable after that, so a later mmap() KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:usb_stream_hwdep_mmap+0x107/0x890 sound/usb/usx2y/us122l.c:182 crashes while reading s->read_size, which sits at offset 0x10. That NULL is an expected state for this field: usb_stream_hwdep_vm_fault(), usb_stream_hwdep_poll(), usb_stream_hwdep_ioctl(), usb_stream_stop() and usb_stream_free() all test it before use. Only the mmap callback misses the check, so let it return -ENODEV, matching what the other hwdep mapping in usx2yhwdeppcm.c does when its shared buffer has not been allocated.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-99318

    In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close bcd2000_disconnect() calls snd_card_disconnect(), which only prevents new opens, and then frees the MIDI URBs. A rawmidi file that was already open can still be closed afterwards, and its close callback, bcd2000_midi_output_close(), calls usb_kill_urb() on midi_out_urb. The URB pointers are cleared on disconnect and their accesses are serialized with midi_lock, but bcd2000_midi_output_close() reads midi_out_urb without that lock. The check can therefore pass just before the pointer is cleared, and usb_kill_urb() then runs on the URB that has already been freed: BUG: KASAN: slab-use-after-free in usb_kill_urb+0x74/0x80 Read of size 8 at addr ffff8880078e7d40 usb_kill_urb bcd2000_midi_output_close close_substream rawmidi_release_priv snd_rawmidi_release Allocated by: usb_alloc_urb <- bcd2000_init_midi <- bcd2000_probe Freed by: usb_free_urb <- bcd2000_midi_free <- bcd2000_disconnect Take the lock in bcd2000_midi_output_close() and reference the URB with usb_get_urb() before releasing it. The URB then stays valid until usb_put_urb() after usb_kill_urb() has returned, even if a disconnect frees it in the meantime. usb_kill_urb() itself cannot run under midi_lock, as the completion handler takes the same lock.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-99308

    In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-99307

    In the Linux kernel, the following vulnerability has been resolved: ceph: require the dentry lease record to cover struct ceph_mds_reply_lease parse_reply_info_lease() reads a 32-bit struct_len off the wire and only checks that many bytes are present, without requiring struct_len to cover sizeof(struct ceph_mds_reply_lease) (10 bytes). A malicious MDS can declare a shorter record and still get the pointer published: the following *p += sizeof(**lease) overshoot is undone by *p = lend, so nothing downstream rejects the reply. ceph_fill_trace() -> update_dentry_lease() then reads 10 bytes through that pointer on any lookup on a mounted CephFS, running past the end of the message front. Require the record to cover the structure, matching the sibling parse_reply_info_dir(). A conforming MDS always encodes the full 10 bytes. BUG: KASAN: slab-out-of-bounds in __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) Read of size 4 at addr ffff888026c63d65 by task kworker/0:3/2366 Workqueue: ceph-msgr ceph_con_workfn Call Trace: __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) ceph_fill_trace (fs/ceph/inode.c:1474 fs/ceph/inode.c:1823) mds_dispatch (fs/ceph/mds_client.c:4229 fs/ceph/mds_client.c:7225) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address is located 357 bytes inside of allocated 360-byte region [ffff888026c63c00, ffff888026c63d68)

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-99302

    In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: reject short connection requests nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The iWARP path allocates exactly the peer-provided length, so a six-byte MPA request reaches the parser and the hsqsize load reads two bytes past the allocation. Require the complete request structure before reading any of its fields. The decoded KASAN report is: BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41 Workqueue: iw_cm_wq cm_work_handler Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) cma_cm_event_handler (drivers/infiniband/core/cma.c:2181) iw_conn_req_handler (drivers/infiniband/core/cma.c:2640) cm_work_handler (drivers/infiniband/core/cm.c:2502 drivers/infiniband/core/cm.c:3858) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Allocated by task 12: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_node_track_caller_noprof (mm/slub.c:5414 mm/slub.c:5545) kmemdup_noprof (mm/util.c:138) cm_event_handler (drivers/infiniband/core/iwcm.c:194 drivers/infiniband/core/iwcm.c:1076) siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408) siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750) siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086) The buggy address is located 0 bytes to the right of allocated 6-byte region [ff1100010459d360, ff1100010459d366)

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-99301

    In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-99282

    In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: fix use-after-free on lower qdisc drop The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return value against NETDEV_TX_OK alone. A slave that consumes the skb but returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated as if the skb were still owned, so the loop restores skb->dev and calls __skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit() from its ndo_start_xmit() (propagated since cbbef5e18307), and when the lower qdisc drops the packet that value is NET_XMIT_DROP after the skb has been freed, giving a use-after-free in teql_master_xmit(). The Fix: test for consumption with dev_xmit_complete(), which accepts NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps the packet counted in tx_packets/tx_bytes and advances the slave; a consumed result that is neither a success nor NET_XMIT_CN ends the attempt and is charged to tx_dropped, so lower-qdisc drops are no longer reported as good transmits. NET_XMIT_CN is counted like success because it can accompany acceptance of the current packet: pfifo_head_drop drops the old head, enqueues the current skb and returns NET_XMIT_CN. Conditions to recreate the bug: With CONFIG_NET_SCH_TEQL, CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0 and a teql0 root on lkrvlan0; bring teql0 up with an address and send one UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower qdisc while holding a freed skb.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-99271

    In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Clear prev_fbuf on capture buffer release A KASAN slab-use-after-free read was reported in submit_audio_out_urb() when generating an impulse test signal: BUG: KASAN: slab-use-after-free in create_impulse_test_signal sound/usb/line6/playback.c:76 [inline] BUG: KASAN: slab-use-after-free in submit_audio_out_urb+0x1848/0x1b20 sound/usb/line6/playback.c:249 Read of size 2 at addr ffff888008d74870 by task syz.2.3214/7785 Allocated by task 11: kmem_cache_alloc_noprof+0x2f0/0x390 mm/slub.c:4144 line6_buffer_acquire+0x1a1/0x220 sound/usb/line6/pcm.c:158 line6_pcm_acquire+0xb6/0x230 sound/usb/line6/pcm.c:329 line6_startup_work+0x3c/0x50 sound/usb/line6/driver.c:728 Freed by task 7785: kfree+0xf8/0x390 mm/slub.c:6566 line6_buffer_release sound/usb/line6/pcm.c:176 [inline] line6_buffer_release+0xa5/0xf0 sound/usb/line6/pcm.c:170 __line6_pcm_release sound/usb/line6/pcm.c:305 [inline] line6_pcm_release+0x5a/0x80 sound/usb/line6/pcm.c:313 snd_toneport_monitor_put+0x11b/0x190 sound/usb/line6/toneport.c:183 line6pcm->prev_fbuf points into the capture PCM stream buffer (line6pcm->in.buffer), which is updated during audio_in_callback() to feed rate synchronization, software monitoring, and impulse test signal generation on playback side. When all capture streams are closed, line6_buffer_release() frees pstr->buffer with kfree(). However, it does not clear line6pcm->prev_fbuf. If playback is subsequently started (e.g. via impulse test signal volume control snd_line6_impulse_volume_put()), submit_audio_out_urb() dereferences the stale pointer line6pcm->prev_fbuf under in.lock, resulting in a slab-use-after-free read. Clear prev_fbuf and prev_fsize in line6_buffer_release() when releasing the capture stream buffer under in.lock, ensuring that no stale buffer pointer can be accessed by submit_audio_out_urb().

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-99272

    In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the data area in SMB2_read() SMB2_read() copies le32_to_cpu(rsp->DataLength) bytes from (char *)rsp + rsp->DataOffset without checking that the range lies within the response actually received. A READ response with DataOffset == 0 makes smb2_get_data_area_len() zero the data length, so smb2_check_message() accepts a frame as short as the fixed response, while SMB2_read() still uses the server-supplied DataLength, capped only by CIFS_MAX_MSGSIZE and the caller's length. A malicious server can answer the synchronous read used by the mfsymlinks (or SFU) symlink parser with an 81-byte READ response carrying DataOffset 0 and DataLength 1067, making the client copy 1067 bytes from a 448-byte receive object (KASAN slab-out-of-bounds; up to 16 KiB in the general case). Clamp a zero (or header-overlapping) DataOffset to read_rsp_size, as handle_read_data() does for the asynchronous path, and reject the response unless DataOffset + DataLength fits within rsp_iov.iov_len. The SMB1 helper was fixed the same way in 5be5bdda5863.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99273

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: reserve space for the UTF-16 terminator in stream info smb_strtoUTF16() always writes a terminating zero UTF-16 unit after the converted characters, but get_file_stream_info() budgets only sizeof(struct smb2_file_stream_info) + streamlen * 2 for a stream entry and sizeof(struct smb2_file_stream_info) + 7 * 2 for the trailing "::$DATA" entry. When an entry exactly fills the 448-byte small response buffer, the terminator is written two bytes past the allocation. Reserve one extra UTF-16 unit in both budget checks. The terminator is not part of the wire format, so the reported lengths are unchanged.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-99274

    In the Linux kernel, the following vulnerability has been resolved: smb: client: fix fiemap wild read on empty truncated response smb3_fiemap() treats -E2BIG from SMB2_ioctl() as a truncated range blob and loops for the next chunk. If the server reports STATUS_BUFFER_OVERFLOW with OutputCount == 0, SMB2_ioctl() returns -E2BIG with out_data == NULL and out_data_len == 0, and the existing length checks accept the empty result. The loop then evaluates next = out_data[num - 1].file_offset + ... with num == 0, reading 16 bytes before NULL. Reject a truncated range blob that contains no range, so the resume offset is never computed from an empty response. Also require the last range in a truncated blob to advance the resume offset without overflowing, and to stay within the requested range; a malicious or broken server could otherwise make no progress or underflow len and loop forever. Free the previous response buffer before retrying. Reproduced on 6.6.87.2 with a malicious SMB2 server that answers FSCTL_QUERY_ALLOCATED_RANGES with STATUS_BUFFER_OVERFLOW and OutputCount == 0; an FS_IOC_FIEMAP ioctl on the mount oopses in cifs_fiemap() with CR2 = fffffffffffffff8. The code path is unchanged on mainline.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-100080

    In the Linux kernel, the following vulnerability has been resolved: xen-netback: Fix UAF when reading statistics data The network statistic data in the driver is protected by RCU. Unfortunately when tearing down the queues after an error during connecting to the frontend (e.g. due to illegal Xenstore data filled in by the guest), the statistic data is being freed without synchronizing the RCU state. In case the data is being read via sysfs in this phase, access to already freed memory or memory being in new use is possible. Fix that by calling synchronize_net() before freeing the queue data. This is XSA-526 / CVE-2026-100080

    Memory safety OS & kernel Linux

    unscored 0.3% exploit odds No fix listed
  34. CVE-2026-100082

    In the Linux kernel, the following vulnerability has been resolved: xen-blkback: Avoid UAF when reading I/O statistics Reading I/O statistics via sysfs concurrently with tearing down a frontend device might result in UAF or a NULL dereference, as the reading of the statistics data is not synchronized with freeing the data. Use a rwlock for synchronizing. This is XSA-528 / CVE-2026-100082

    Memory safety OS & kernel

    unscored 0.3% exploit odds No fix listed
  35. CVE-2026-99150

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr amdgpu_debugfs_gpr_read() drops its runtime PM reference right after reading the wave registers. When copying them to userspace fails, it jumps to the err label, which drops the reference a second time. A read into a bad buffer on Navi31 either steals a reference somebody else holds (power/runtime_usage goes from 1 to 0) or underflows the count: amdgpu 0000:03:00.0: Runtime PM usage count underflow! The registers are already in the kernel buffer at that point, so finish the hardware access first and copy the buffer with a single copy_to_user() instead of the put_user() loop with its own error path. (cherry picked from commit 31035bbd74f7c3e10c163db875b8e67f8b50ee6a)

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-99190

    In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix memory leak in gpiod_set_array_value_complex() on error paths A drive-by review by Sashiko reports that, after a failed call to gpiochip_set_multiple(), gpiod_set_array_value() returns abruptly, bypassing the freeing of possibly alloced bitmaps, potentially leaking memory. It is an unlikely error path, but is possible. Defer the return code check until after the bitmap_free() block.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-99138

    In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO) do_tcp_getsockopt() reads icsk->icsk_ca_ops and dereferences the get_info function pointer without rcu_read_lock(). With BPF struct_ops congestion control, ca_ops can point to dynamically allocated memory that is freed concurrently, resulting in a use-after-free when the kernel dereferences or calls through the stale pointer. BUG: KASAN: slab-use-after-free in do_tcp_getsockopt+0x2037/0x23e0 Read of size 8 at addr ffff888013701258 by task exploit/149 do_tcp_getsockopt+0x2037/0x23e0 (net/ipv4/tcp.c:4564) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by wrapping the ca_ops load and get_info call within rcu_read_lock()/rcu_read_unlock(), and using READ_ONCE() to load the icsk_ca_ops pointer.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99124

    In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix leak of uninitialized kernel data in SCLP report While report_error_write() checks that the provided buffer is at least as large as the header struct, but not that it is large enough to contain the report with the length claimed by report->length. If user-space provides a short buffer, meaning a larger report->length than the actually written payload, up to around 4K of kernel data from past the kmalloc(len + 1) sized buffer allocated in kernfs_fop_write_iter() will leak into the SCLP report. However, as the entity processing the SCLP is privileged and able to access at least the page including the report, this does not leak data that entity could not access but it is still an out of bounds read and a malformed error report that should be rejected.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-99106

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: free the userptr ranges when a CS fails after parser_bos amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of the BO list and looks up the user pages. Those ranges are only freed when amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks them under the notifier lock. If amdgpu_cs_patch_jobs(), amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of amdgpu_cs_submit() fails, nothing frees them: neither amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e->range. Each such CS then leaks the range, its hmm_pfns array (8 bytes per page of the userptr BO) and the BO reference the range holds. An IB on a ring that patches the CS in place (e.g. VCN) with an unmapped va_start fails in amdgpu_cs_patch_ibs() and takes this path. Free the ranges on those error paths. Ranges amdgpu_cs_submit() already dropped are NULL, so freeing them again is a no-op. (cherry picked from commit c52a9542ed7cfd527feb938bd0accada2ac8d267)

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-99182

    In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Fix shift-out-of-bounds for aggregated ALH capture When ch_count is smaller than blob->alh_cfg.device_count (e.g. a mono capture stream, such as a SmartMic, aggregated across multiple SDW links), step = ch_count / blob->alh_cfg.device_count truncates to 0. The subsequent GENMASK(step - 1, 0) then underflows step - 1 (u32) to UINT_MAX, causing GENMASK()'s internal shift to use an out-of-bounds exponent: UBSAN: shift-out-of-bounds in sound/soc/sof/ipc4-topology.c:2363:13 shift exponent 18446744069414584384 is too large for 64-bit type 'long unsigned int' Treat ch_count < device_count the same way as the existing "channels equal to output reference channels" case: apply the same ch_mask to every aggregated device instead of trying to split channels that can't be evenly divided.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-99171

    In the Linux kernel, the following vulnerability has been resolved: ntfs3: free the sbi after a grace period If the "nocase" mount option ntfs3 uses custom hash and dentry compare functions. Both access ntfs3 superblock private information in rcu pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any rcu delay. A lookup that's still inside the filesystem when the last reference to the mount is dropped causes a UAF. With a pathwalk held up in ntfs_d_hash() while the last reference to the mount goes away: BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940 Read of size 8 at addr ff1100010453c850 by task walker/99 Call Trace: <TASK> ntfs_nls_to_utf16+0x752/0x940 ntfs_d_hash+0x22b/0x500 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 95: __kmalloc_cache_noprof+0x249/0x560 ntfs_init_fs_context+0x2db/0x5a0 alloc_fs_context+0x52e/0xc70 [...] Freed by task 98: kfree+0x1db/0x5b0 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 task_work_run+0x131/0x250 The bug is currently masked by the grace period in namespace_unlock() for umount(2). Keep the necessary information until the filesystem private info is freed and free it with an rcu delay. ntfs3_free_sbi() now runs from an rcu callback and drops the upcase table via ntfs_put_shared(). So switch s_shared_lock over to spin_lock_bh(). Otherwise the callback can deadlock against a task holding the lock on the same cpu.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-99157

    In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after the 40-byte header and writes 8 bytes past the end of the buffer. Let each BSG transport pass its reply buffer size to bsg_setup_queue() and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-99120

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Cope with the SS bit being set in #NPF exit codes When running Hyper-V from Windows 11, KVM is seeing the SS bit set in nested page fault error codes produced for shadowed NPT. The AMD manual is unclear about when SS is set, including whether it can be set when SupervisorShadowStackEn (bit 6) is not set in the MISC_CTL field of the VMCB. Nevertheless, the unexpected SS bit causes out of bounds accesses in permission_fault(), seen as either WARNs or UBSAN reports: kernel: UBSAN: array-index-out-of-bounds in arch/x86/kvm/mmu.h:225:27 kernel: index 34 is out of range for type 'u16 [16]' (in this case, the page fault error code is 34*2=0x44, i.e. SS|U; the report shows SS|U|W happening as well). Fix the handling of unknown error codes by dropping SS and (with a WARN) any bits not among those that permission_fault() expects to receive. At the same time, given the uncertainty about when hardware sets SS, follow the processor's behavior when constructing the fault's error code, and preserve the SS bit as passed to FNAME(walk_addr_generic). While the behavior is surprising, there's a possibility that Hyper-V expects it (Hyper-V does not even enable CET unless it finds MBEC/GMET!), so retain the information when reflecting the fault to L1 instead of unconditionally discarding it. Bisection shows that this started happening with commit 687ee95c1b6d ("KVM: nSVM: enable GMET for guests"), even though SHSTK was available to guests since Linux 6.18. However, this is not because bit 1 of MISC_CTL (GMET) somehow enables reporting the SS bit; rather, it's simply that Hyper-V never uses CET unless GMET is also present. The WARN is reproducible even with gmet=0, with some hacking of kvm-unit-tests's cet.c testcase to ensure that the first access to the shadow stack triggers a page fault.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-99139

    In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free in do_tcp_getsockopt(TCP_CONGESTION) do_tcp_getsockopt() reads icsk->icsk_ca_ops->name without holding rcu_read_lock(). Since commit 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf"), icsk_ca_ops can point to dynamically allocated BPF struct_ops memory that may be freed concurrently via setsockopt(TCP_CONGESTION), leading to a use-after-free. BUG: KASAN: slab-use-after-free in _copy_to_user+0x37/0x60 Read of size 16 at addr ffff888013505260 by task exploit/149 _copy_to_user+0x37/0x60 do_tcp_getsockopt+0x158a/0x2460 (net/ipv4/tcp.c:4585) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by holding rcu_read_lock() around the ca_ops->name access, using READ_ONCE() to load icsk_ca_ops, and copying the name to a stack buffer before releasing the lock. Also annotate the relevant icsk_ca_ops stores with WRITE_ONCE() to fix the accompanying KCSAN data-race issue.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-99113

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in smb2_get_info_filesystem() reports 64 bytes for FS_OBJECT_ID_INFORMATION, that is the whole of struct object_id_info, but writes only 46 of them: - objid[] is 16 bytes, and when the volume UUID is not available only sizeof(stfs.f_fsid) (8) bytes are copied into it; - extended_info.version_string[] is STRING_LENGTH (28) bytes, and only strlen("1.1.0") (5) bytes are copied into it. The response buffer is zeroed on allocation (kvzalloc() in smb2_allocate_rsp_buf()), so for a standalone request the remaining 31 bytes are zero. In a compound request they need not be. The offset of the next response is advanced by the length pinned for the previous one, so if a preceding command wrote its reply into the buffer and then failed, smb2_set_err_rsp() pins only the short error response and the next reply lands inside the area that has already been written. Only the header is cleared there: memset((char *)rsp_hdr, 0, sizeof(struct smb2_hdr) + 2); The client then receives up to 31 bytes of a response it was not meant to see, including one that failed with an access denied error. Clear the structure before filling it in. As a side effect version_string is now NUL terminated.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-99103

    In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix unbound pool lifetime for pending pwqs KASAN reports a use-after-free of an unbound worker_pool in node_activate_pending_pwq(): BUG: KASAN: slab-use-after-free in _raw_spin_trylock+0x6d/0x120 Read of size 4 at addr ffff8880089ce000 by task kworker/u22:0/318 CPU: 1 UID: 0 PID: 318 Comm: kworker/u22:0 Not tainted 7.2.0 #1 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: 0x0 (flush-8:0) Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xce/0x610 kasan_report+0xce/0x100 _raw_spin_trylock+0x6d/0x120 pwq_dec_nr_in_flight+0x4b4/0xcb0 process_one_work+0x921/0x11a0 worker_thread+0x4d0/0xd20 kthread+0x2de/0x3c0 ret_from_fork+0x3aa/0x620 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 311: alloc_pwq+0x439/0xca0 apply_wqattrs_prepare+0x75e/0xd10 apply_workqueue_attrs_locked+0x44/0xa0 wq_nice_store+0x350/0x450 Freed by task 0: kfree+0x127/0x3b0 rcu_core+0x523/0x1780 handle_softirqs+0x1b3/0x610 Last potentially related work creation: put_unbound_pool+0x3f3/0x7d0 pwq_release_workfn+0x494/0x8e0 kthread_worker_fn+0x1ff/0x790 Canceling the last inactive work skips pwq_dec_nr_active(), so an empty pwq can remain on pending_pwqs when its refcnt reaches zero. pwq_release_workfn() currently puts the pool before removing that pwq. If this drops the last pool reference, the pool can be RCU-freed while the pwq remains reachable, and node_activate_pending_pwq() may trylock the freed pool->lock. Remove the pwq from pending_pwqs before putting the pool.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-99204

    In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: Protect the recovery list during debugfs reads Recovery participant records must remain alive while debug_state_print() walks reco.node_data and formats their fields. The formatter holds dlm->spinlock, but the recovery participant list is protected by dlm_reco_state_lock. In particular, dlm_destroy_recovery_area() detaches the list under dlm_reco_state_lock and frees the detached records after releasing it. A concurrent debugfs open can therefore read freed memory. Protect the participant traversal and field reads in debug_state_print() with dlm_reco_state_lock, matching the existing list writers. This also serializes the traversal against list_add_tail() during recovery-area initialization. Make the existing lock available to the debug code through dlmcommon.h; the lock remains internal to the OCFS2 DLM module. Release dlm->spinlock after formatting the other domain state and before acquiring dlm_reco_state_lock, so the debug reader does not nest the two locks. Leave recovery list insertion, detachment and freeing unchanged. KASAN report as below: BUG: KASAN: slab-use-after-free in debug_state_open+0x1169/0x12d0 Read of size 4 at addr ffff88810662ef80 by task dlm-state-stres/896 CPU: 1 UID: 0 PID: 896 Comm: dlm-state-stres Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? debug_state_open+0x1169/0x12d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? debug_state_open+0x1169/0x12d0 kasan_report+0xe0/0x110 ? debug_state_open+0x1169/0x12d0 debug_state_open+0x1169/0x12d0 ? __pfx_debug_state_open+0x10/0x10 full_proxy_open_regular+0x193/0x310 do_dentry_open+0x595/0x12d0 ? __pfx_full_proxy_open_regular+0x10/0x10 vfs_open_consume+0xd1/0x400 ? srso_alias_return_thunk+0x5/0xfbef5 path_openat+0x18d0/0x2020 ? __pfx_path_openat+0x10/0x10 do_file_open+0x21e/0x470 ? __pfx_do_file_open+0x10/0x10 ? _raw_spin_unlock+0x23/0x40 ? srso_alias_return_thunk+0x5/0xfbef5 ? alloc_fd+0x3a6/0x6b0 do_sys_openat2+0xf4/0x1b0 ? __pfx_do_sys_openat2+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __fput+0x5b5/0xa60 __x64_sys_openat+0x136/0x1e0 ? __pfx___x64_sys_openat+0x10/0x10 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Register dump omitted.] </TASK> Allocated by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 dlm_remaster_locks+0x147/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 Freed by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 dlm_destroy_recovery_area+0x285/0x460 dlm_remaster_locks+0x17c4/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff88810662ef80 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 0 bytes inside of freed 32-byte region [ffff88810662ef80, ffff88810662efa0) [Page and memory-state dumps omitted.]

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-99215

    In the Linux kernel, the following vulnerability has been resolved: power: supply: core: prevent unregistering a power supply while a callback runs Once a power supply is registered, its callbacks can immediately start firing from other contexts, such as external_power_changed() triggered by the TCPM stack. If a power supply is unregistered while the callback is still running, the driver data can already be freed when the callback tries to access it, leading to a use-after-free. This happens e.g. when the hardware bus carrying the power supply device malfunctions (e.g. I2C is hogged down by another malfunctioning device) immediately after the power supply is registered, and thus the core is still processing the callbacks which were queued up when the driver starts the removal, leading in some cases to a kernel crash, e.g.: [ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005 [ 11.646751] Mem abort info: [ 11.647006] ESR = 0x0000000096000004 [ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits [ 11.647806] SET = 0, FnV = 0 [ 11.648077] EA = 0, S1PTW = 0 [ 11.648356] FSC = 0x04: level 0 translation fault [ 11.648785] Data abort info: [ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0 [ 11.650390] [0000000000000005] user address but active_mm is swapper [ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP [ 11.651460] Modules linked in: [ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT [ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT) [ 11.653024] Workqueue: events power_supply_changed_work [ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100 [ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8 [ 11.655098] sp : ffff80008192bb30 [ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000 [ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28 [ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62 [ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000 [ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000 [ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590 [ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0 [ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000 [ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000 [ 11.661878] Call trace: [ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P) [ 11.662596] __power_supply_am_i_supplied+0x40/0xb8 [ 11.663040] psy_for_each_psy_cb+0x20/0x40 [ 11.663416] class_for_each_device+0x110/0x150 [ 11.663825] power_supply_am_i_supplied+0x68/0x100 [ 11.664262] bq257xx_external_power_changed+0x58/0x140 [ 11.664733] __power_supply_changed_work+0x60/0x80 [ 11.665170] psy_for_each_psy_cb+0x20/0x40 [ 11.665545] class_for_each_device+0x110/0x150 [ 11.665953] power_supply_changed_work+0x98/0x1b8 [ 11.666382] process_one_work+0x164/0x4c0 [ 11.666758] worker_thread+0x19c/0x320 [ 11.667104] kthread+0x138/0x150 [ 11.667408] ret_from_fork+0x10/0x20 [ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34) [ 11.668294] ---[ end trace 0000000000000000 ]--- Add a read-write semaphore between external_power_changed() and power_supply_unregister() to prevent the latter from returning (and thus the driver from freeing its data) while the callback is still running.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-99162

    In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix use-after-free bug when adding shared proxies The GPIO lookup table can stay alive for longer than the kobject whose name string's address we're assigning to lookup->dev_id. Fix a potential UAF by duplicating the string.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-99144

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue A deferred reenqueue can read a freed user DSQ. The request stays on its CPU's deferred list until run_deferred() takes it, and the RCU callback that frees the DSQ assumes that the grace period has flushed it, so exit_dsq() checks the per-CPU node without the deferred list lock. A grace period waits for readers in flight, not for a pending run_deferred(). A run_deferred() which starts after the grace period began can detach the request right before the callback looks and then read the freed DSQ's id. Cancel the pending requests before the grace period instead. The irq work that frees the DSQ unlinks every CPU's request under the per-CPU deferred list lock, and schedule_dsq_reenq() ignores a new request under the same lock once the id is invalid. Only a run_deferred() that started before the grace period can hold a request, and it runs with IRQs disabled, so the grace period waits for it and nothing touches the DSQ after the callback.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed

CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.