No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2026-96891
A vulnerability was identified in D-Link DIR-825 3.00b32. Affected is the function tunnel_set_params of the file tunnel.c of the component rp-l2tp. The manipulation of the argument peer_hostname leads to out-of-bounds write. The attack may be initiated remotely.
-
CVE-2026-130468
NBAP protocol dissector crash in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service
-
CVE-2022-32548
An issue was discovered on certain DrayTek Vigor routers before July 2022 such as the Vigor3910 before 4.3.1.1. /cgi-bin/wlogin.cgi has a buffer overflow via the username or password to the aa or ab field.
-
CVE-2026-95730
A buffer overflow vulnerability exists in HPE Networking VIA that could allow an authenticated low-privileged local user to cause a denial of service. Successful exploitation could allow an attacker to interrupt the normal operation of the affected system.
-
CVE-2026-115297
NULL Pointer Dereference (CWE-476) in the AMQP protocol parser in Packetbeat can lead to denial of service via specially crafted network traffic. An unauthenticated attacker who can send traffic on a network segment that Packetbeat monitors for AMQP can cause a Go runtime panic that terminates the Packetbeat process. A single crafted packet is sufficient. No AMQP authentication is necessary. While Packetbeat is not running, it does not collect network telemetry.
-
CVE-2026-94089
A vulnerability was determined in D-Link DIR-868L 2.01b05. This issue affects the function strcpy of the file /webfa_authentication.cgi of the component Authentication Handler. Executing a manipulation of the argument id/password can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.
-
CVE-2016-9150
Buffer overflow in the management web interface in Palo Alto Networks PAN-OS before 5.0.20, 5.1.x before 5.1.13, 6.0.x before 6.0.15, 6.1.x before 6.1.15, 7.0.x before 7.0.11, and 7.1.x before 7.1.6 allows remote attackers to execute arbitrary code via unspecified vectors.
-
CVE-2023-36355
TP-Link TL-WR940N V4 was discovered to contain a buffer overflow via the ipStart parameter at /userRpm/WanDynamicIpV6CfgRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.
-
CVE-2026-115486
A flaw was found in the iscsiuio component of open-iscsi. The IPv6 Neighbor Discovery handler accesses link-layer address options at a fixed offset without verifying the packet contains them. Additionally, the ARP table is updated unconditionally with attacker-controlled addresses from the packet headers. An attacker on the same network segment can send a minimal Neighbor Advertisement to poison the ARP table and redirect network traffic.
-
CVE-2026-85103
A heap-based buffer overflow in VPN certificate ASN.1 decoding may allow an unauthenticated remote attacker to execute arbitrary code on Check Point Quantum Security Management and Quantum Security Gateway systems.
-
CVE-2008-7232
Buffer overflow in the report function in xtacacsd 4.1.2 and earlier allows remote attackers to execute arbitrary code via a crafted CONNECT TACACS command.
-
CVE-2026-77206
Libreswan's IKEv2 state machine has a null pointer dereference bug in the EAP handling code for authentication. As a result of inconsistency within the IKEv2 state machine code, this bug can be triggered by any IKEv2 connection, even if EAP is not configured at all. The error is caused by a fall-through where it incorrectly dereferences ike->sa.st_eap which is NULL. A malicious IKE_AUTH packet can trigger this bug, meaning the peer does not need to be authenticated. The bug results in a crash and restart of the pluto daemon. No remote code execution is possible. Continued exploitation can cause a denial of service.
-
CVE-2026-94453
Libreswan's pluto daemon has a use-after-free vulnerability when a client connecting using IKE over TCP closes the connection and another packet (retransmit or malicious) is received for the same tuple. IKE state is retained in memory after the client closes the connection, storing a pointer to iface_endpoint inside ike_sa.sa->st_iface_endpoint. Once this invalid pointer is used, the daemon crashes and restarts. This vulnerability can be triggered before the remote peer has authenticated itself. Continued exploitation can lead to a denial of service. Remote code execution could be possible. The IKE over TCP option is not enabled by default; only configurations that contain listen-tcp=yes are affected.
-
CVE-2026-77708
A pre-authentication stack-based buffer overflow vulnerability has been identified in the SonicOS TACACS+ authentication client, which in specific conditions could potentially enable a remote unauthenticated attacker to cause an application level denial of service.
-
CVE-2026-77709
A pre-authentication heap-based buffer overflow vulnerability has been identified in the SonicOS TACACS+ authentication client, which in specific conditions could potentially enable a remote unauthenticated attacker to cause an application level denial of service.
-
CVE-2026-101081
A security flaw has been discovered in D-Link DI-8400 16.07. This vulnerability affects the function menu_nat_more_asp of the file menu_nat_more.asp of the component Web Administration Service. The manipulation of the argument opt results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.
-
CVE-2026-100740
A vulnerability was detected in D-Link DIR-895L A1_102b07. Impacted is the function tunnel_set_params of the file tunnel.c of the component L2TP Control Channel Parser. Performing a manipulation results in out-of-bounds write. The attack may be initiated remotely. The exploit is now public and may be used.
-
CVE-2026-112158
A weakness has been identified in MikroTik RouterOS up to 6.40.5/6.44/7.20.8. Impacted is the function same_check of the file ipt_SAME.ko. Executing a manipulation can lead to integer overflow. The attack may be launched remotely. Upgrading to version 7.21.5 and 7.23.1 is recommended to address this issue. You should upgrade the affected component.
-
CVE-2026-90693
A flaw has been found in D-Link DIR-878 120B05. This impacts the function SetWan3Settings of the component WAN Settings. This manipulation of the argument Primary/Secondary causes stack-based buffer overflow. Remote exploitation of the attack is possible.
-
CVE-2026-90692
A vulnerability was detected in D-Link DIR-878 120B05. This affects the function SetDynamicDNSIPv6Settings of the component Dynamic DNS IPv6 Settings. The manipulation of the argument IPv6Address/Hostname results in stack-based buffer overflow. The attack may be launched remotely.
-
CVE-2026-90680
A security flaw has been discovered in D-Link DIR-823G 1.0.2B05_20181207. The impacted element is the function strcpy of the file /HNAP1/SetStaticRouteSettings of the component HNAP1. The manipulation of the argument PAddress/SubnetMask/Gateway results in stack-based buffer overflow. The attack can be launched remotely.
-
CVE-2017-13772
Multiple stack-based buffer overflows in TP-Link WR940N WiFi routers with hardware version 4 allow remote authenticated users to execute arbitrary code via the (1) ping_addr parameter to PingIframeRpm.htm or (2) dnsserver2 parameter to WanStaticIpV6CfgRpm.htm.
-
CVE-2017-12786
Network interfaces of the cliengine and noviengine services, included in the NoviWare software distribution through NW400.2.6 and deployed on NoviSwitch devices, can be inadvertently exposed if an operator attempts to modify ACLs, because of a bug when ACL modifications are applied. This could be leveraged by remote, unauthenticated attackers to gain resultant privileged (root) code execution on the switch, because there is a stack-based buffer overflow during unserialization of packet data.
-
CVE-2017-12787
A network interface of the novi_process_manager_daemon service, included in the NoviWare software distribution through NW400.2.6 and deployed on NoviSwitch devices, can be inadvertently exposed if an operator attempts to modify ACLs, because of a bug when ACL modifications are applied. This could be leveraged by remote, unauthenticated attackers to gain resultant privileged (root) code execution on the switch, because incoming packet data can contain embedded OS commands, and can also trigger a stack-based buffer overflow.
-
CVE-2024-29671
Buffer Overflow vulnerability in NEXTU FLATA AX1500 Router v.1.0.2 allows a remote attacker to execute arbitrary code via the POST request handler component.
-
CVE-2026-93345
MikroTik RouterOS before 7.25beta4 contains an improper input validation vulnerability in the labelled-VPN NLRI iterators of the routing service that allows an unauthenticated on-path attacker to crash the BGP service by sending a malformed MP_REACH_NLRI UPDATE message with a prefix-length value below the minimum valid for a labelled-VPN NLRI, which passes validation while describing a route with a negative-length address portion. Attackers can repeatedly send a single BGP UPDATE packet carrying a VPNv4 or VPNv6 NLRI with an out-of-bounds prefix-length to indefinitely hold down the BGP plane, causing session termination without a NOTIFICATION and triggering a service malfunction on the device. The fix is carried only in 7.25beta4, a development build; the current stable release 7.24.2 and the current long-term release 7.23.5 both remain affected.
-
CVE-2026-102177
An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated attacker to cause a denial of service when IS-IS link protection and backup-selection are configured.
-
CVE-2026-84471
The fix for CVE-2026-12996 was incomplete. A use-after-free in OpenVPN 2.6.0 through 2.6.22 and 2.7_alpha1 through 2.7.7 allows remote authenticated peers to potentially cause a denial of service or leak memory via crafted packets during TLS session promotion or expiry.
-
CVE-2017-6548
Buffer overflows in networkmap on ASUS RT-N56U, RT-N66U, RT-AC66U, RT-N66R, RT-AC66R, RT-AC68U, RT-AC68R, RT-N66W, RT-AC66W, RT-AC87R, RT-AC87U, RT-AC51U, RT-AC68P, RT-N11P, RT-N12+, RT-N12E B1, RT-AC3200, RT-AC53U, RT-AC1750, RT-AC1900P, RT-N300, and RT-AC750 routers with firmware before 3.0.0.4.380.7378; RT-AC68W routers with firmware before 3.0.0.4.380.7266; and RT-N600, RT-N12+ B1, RT-N11P B1, RT-N12VP B1, RT-N12E C1, RT-N300 B1, and RT-N12+ Pro routers with firmware before 3.0.0.4.380.9488; and Asuswrt-Merlin firmware before 380.65_2 allow remote attackers to execute arbitrary code on the router via a long host or port in crafted multicast messages.
-
CVE-2026-75351
OpENer v2.3/commit 76b95cf, contains an out-of-bounds read in the server-side EtherNet/IP ForwardOpen connection-path parser. This allows a remote attacker to cause a denial of service.
-
CVE-2026-75353
OpENer v2.3/ commit 76b95cf, contains an out-of-bounds read in the server-side EtherNet/IP ForwardOpen connection-path parser. This allows a remtoe attacker to cause a denial of service
-
CVE-2026-108906
A vulnerability has been found in Netcore NR268 1.7.121109. This affects the function filter_arp_put_file_cgi of the file /router/filter_arp_put_file.cgi. The manipulation of the argument put_file leads to out-of-bounds read. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2020-10827
A stack-based buffer overflow in apmd on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve code execution via a remote HTTP request.
-
CVE-2020-10828
A stack-based buffer overflow in cvmd on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve code execution via a remote HTTP request.
-
CVE-2014-7859
Stack-based buffer overflow in login_mgr.cgi in D-Link firmware DNR-320L and DNS-320LW before 1.04b08, DNR-322L before 2.10 build 03, DNR-326 before 2.10 build 03, and DNS-327L before 1.04b01 allows remote attackers to execute arbitrary code by crafting malformed "Host" and "Referer" header values.
-
CVE-2023-27853
NETGEAR Nighthawk WiFi6 Router prior to V1.0.10.94 contains a format string vulnerability in a SOAP service that could allow an attacker to execute arbitrary code on the device.
-
CVE-2019-8287
TightVNC code version 1.3.10 contains global buffer overflow in HandleCoRREBBP macro function, which can potentially result code execution. This attack appear to be exploitable via network connectivity.
-
CVE-2026-101972
An Integer Overflow or Wraparound vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial of service via specific OSPFv2 packets sent on an OSPF-enabled interface.
-
CVE-2026-102032
A Missing Release of Memory after Effective Lifetime vulnerability in the l2ald process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial of service via crafted packets when the static MAC-IP feature is in use.
-
CVE-2026-102040
A NULL Pointer Dereference vulnerability in the rpd routing daemon of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated attacker to crash the routing daemon and cause a denial of service via an RSVP Path message.
-
CVE-2026-102017
An Out-of-bounds Write vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated attacker to cause a routing-plane denial of service via Auto-RP mapping announcements received when Auto-RP mapping is enabled.
-
CVE-2026-102039
A NULL Pointer Dereference vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker to cause a denial of service via a malformed RSVP Path message received on an EVPL LMP control channel.
-
CVE-2026-102045
An Out-of-bounds Write Out-of-bounds Write vulnerability in lacpd of Juniper Networks Junos OS Evolved allows a Layer-2-adjacent attacker to cause a denial of service via a crafted frame received on an LACP-enabled aggregated-Ethernet member port.
-
CVE-2026-102021
A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent network attacker to cause a denial of service via a crafted RSVP packet when MPLS-TE RSVP processing is enabled. The condition can terminate rpd and disrupt routing protocol sessions.
-
CVE-2026-102018
A NULL Pointer Dereference vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial-of-service condition via a malformed PIM Bidir message.
-
CVE-2026-101988
A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial of service via LDP messages received over an operational LDP session.
-
CVE-2026-101970
A Use After Free vulnerability in the rpd PIM Join/Prune processing of Juniper Networks Junos OS and Junos OS Evolved platforms allows an unauthenticated adjacent attacker to crash the routing daemon via specific PIM messages when sparse mode PIM is configured.
-
CVE-2026-101960
An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS Evolved on QFX5240, QFX5241 and QFX5250 configured for BGP global-load-balancing and more than 128 ecmp next-hops allows an attacker to cause an rpd crash.
-
CVE-2026-102051
An Improper Release of Memory Before Removing Last Reference vulnerability in the l2cpd process of Juniper Networks Junos OS and Junos OS Evolved platforms allows an adjacent unauthenticated attacker to cause l2cpd memory exhaustion and Layer 2 control-plane disruption via LLDP traffic when fast receive processing is enabled.
-
CVE-2026-102056
An Out-of-bounds Read vulnerability in the cfmd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent-network attacker to crash the daemon and disclose limited process memory via a specific CFM Message sent to a configured interface.
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.