No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2020-10924
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the UPnP service, which listens on TCP port 5000 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9643.
-
CVE-2026-19386
A stack-based buffer overflow in the ASUS router modules allows an authenticated nearby user to execute arbitrary code via a crafted configuration file upload that exceeds the expected buffer size.Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-102174
A Stack-based Buffer Overflow vulnerability in the iked IKE key-management daemon of Juniper Networks Junos OS on the SRX Series allows an authenticated remote-access VPN client to execute code with root privileges or cause denial of service via the remote-access VPN authentication and JIMS identity-publishing path.
-
CVE-2026-102028
A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote BGP peer to cause a denial of service when multiple UPDATEs occur over a single TCP session with 'bgp family l2vpn auto-discovery-only' configured.
-
CVE-2026-101945
An Integer Overflow or Wraparound vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows a remote attacker with an established EVPN BGP peering relationship to cause a denial of service via EVPN BGP route processing. The issue affects EVPN-enabled routing instances and can disrupt control-plane adjacencies.
-
CVE-2026-101979
A Stack-based Buffer Overflow vulnerability in the authd Juniper Networks Junos OS and Junos OS Evolved allows a network attacker with SNMP read access to execute code with root privileges or cause a denial of service via a specific SNMP packet, when SNMP and AAA are enabled.
-
CVE-2026-101949
A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated remote BGP neighbor to cause a denial of service via a VPN-flowspec BGP update if it is readvertised and BMP post-policy RIB-out monitoring is configured.
-
CVE-2026-102029
A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated configured MSDP peer or adjacent PIM sender to cause a denial of service via an MSDP or PIM policy that uses AS-path expansion.
-
CVE-2026-102024
An Integer Overflow or Wraparound vulnerability in the routing daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated BGP peer to cause a denial of service via BGP route updates when extended-nexthop-tunnel is enabled.
-
CVE-2026-101977
A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured eBGP peer to cause a persistent routing-daemon denial of service via a specific BGP packet when ephemeral configuration is used.
-
CVE-2026-101944
An Integer Overflow or Wraparound vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to cause a denial of service via specially crafted EVPN route updates from an accepted EVPN BGP peer.
-
CVE-2026-101948
A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote unauthenticated BGP peer to cause a denial of service via a specific BGP FlowSpec update received by an affected BGP session.
-
CVE-2026-102036
An Integer Overflow or Wraparound vulnerability in the l2ald process of Juniper Networks Junos OS and Junos OS Evolved allows a configured EVPN BGP peer to cause a denial of service via EVPN Type-2 MAC/IP routes.
-
CVE-2026-101961
A NULL Pointer Dereference vulnerability in the routing-policy nexthop-ECMP matcher of Juniper Networks Junos OS and Junos OS Evolved allows a configured eBGP peer to cause a routing-daemon denial of service via a specific BGP packet received while a nexthop-ecmp qualifier is attached to a BGP import policy.
-
CVE-2026-101940
A NULL Pointer Dereference vulnerability in the rpd routing daemon of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated configured BGP peer to cause a denial of service via a BGP UPDATE when ISO-VPN and egress-protection configuration is enabled.
-
CVE-2026-101941
A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured BGP neighbor to cause a denial of service via a BGP route update when specific routing-policy resolution-map and policy event-tracing configuration is enabled.
-
CVE-2026-103994
A Heap-based Buffer Overflow vulnerability in the VXLAN Gateway Daemon (vgd) of Juniper Networks Junos OS allows a malicious or compromised SDN-controller to cause a complete outage of the OVSDB control plane and possibly remote code execution.
-
CVE-2026-102179
An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker with access to a configured BGP EVPN peer to cause a denial of service via BGP EVPN route processing when the l2vpn-evpn RIB telemetry sensor is subscribed. Successful exploitation can crash rpd and interrupt routing protocols until the daemon restarts and reconverges.
-
CVE-2026-102081
A Missing Release of Memory after Effective Lifetime vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS). On SRX4000 Series, and SRX5000 Series with SPC3, and MX Series with SPC3, when one or more specific application services like ALGs, IDP/DPI, APPID, SECINTEL, AAMW or AppQoE are configured, a high connections per second churn will cause PFE memory to leak. If the memory is exhausted traffic processing will be impacted. Use the CLI command show security monitoring to monitor the memory utilization of the PFEs on the FPCs. This issue affects Junos OS on SRX Series and MX Series: * 23.4 versions from 23.4R2-S3 before 23.4R2-S7; * 24.2 versions from 24.2R2 before 24.2R2-S3; * 24.4 versions before 24.4R2-S3; * 25.2 versions before 25.2R1-S2, 25.2R2.
-
CVE-2026-102180
A Stack-based Buffer Overflow vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker with access to a configured BGP peering session to cause a denial of service by sending a crafted BGP route attribute, which is processed while a BGP RIB streaming telemetry subscription is active. This issue does not affect Junos OS versions prior to 22.1R1. This issue does not affect Junos OS Evolved versions prior to 22.1R1-EVO.
-
CVE-2026-102057
A Stack-based Buffer Overflow vulnerability in the jdhcpd process of Juniper Networks Junos OS allows an unauthenticated adjacent attacker to cause a denial of service via a DHCP client response. The issue affects DHCP client operation and can interrupt related DHCP, relay, and zero-touch-provisioning services.
-
CVE-2026-101973
A NULL Pointer Dereference vulnerability in the pkid component of Juniper Networks Junos OS allows an unauthenticated remote attacker to cause a denial of service via a malformed packet received during CMP enrollment or automatic certificate re-enrollment.
-
CVE-2026-33798
A Stack-based Buffer Overflow vulnerability in the srxpfe of Juniper Networks Junos OS and Junos OS Evolved on the SRX Series allows an L2-adjacent attacker to execute arbitrary code as root via high-availability fabric traffic.
-
CVE-2026-102069
A Stack-based Buffer Overflow vulnerability in the dot1x daemon of Juniper Networks Junos OS devices operating as Junos Fusion Aggregation Devices allows an adjacent attacker acting as the configured ICCP peer to cause a denial of service and potentially execute code as root via. The issue is triggered when dot1x synchronization is enabled for the required Fusion satellite topology.
-
CVE-2026-102014
A Stack-based Buffer Overflow vulnerability in the authd process of Juniper Networks Junos OS allows an attacker able to influence a configured RADIUS server to cause authd to crash or execute code with root privileges via a malicious RADIUS response.
-
CVE-2026-102015
A Heap-based Buffer Overflow vulnerability in the secure-dot1xd process of Juniper Networks on Junos OS and Junos OS Evolved allows an unauthenticated adjacent network attacker to execute code as root or cause a denial of service via an EAPOL frame sent to an 802.1X-authenticated interface.
-
CVE-2026-102061
A Stack-based Buffer Overflow vulnerability in the phone-home daemon (phcd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated attacker to execute arbitrary code as root via a crafted DHCP SZTP bootstrap message. This issue only affects platforms that support Secure-ZTP.
-
CVE-2026-102052
A Stack-based Buffer Overflow vulnerability in the jdhcpd process of Juniper Networks Junos OS and Junos OS Evolved platforms allows an adjacent unauthenticated attacker to cause denial of service or execute arbitrary code with root privileges via a malformed DHCPv4 server response when the DHCPv4 local-client feature is used.
-
CVE-2026-102049
A Stack-based Buffer Overflow vulnerability in the l2cpd process of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated attacker to cause a denial of service or execute arbitrary code with root privileges via LLDP traffic received on an interface with Unified Access Policy enabled.
-
CVE-2026-102055
A Stack-based Buffer Overflow vulnerability in the cfmd process of Juniper Networks Junos OS on MX Series and Junos OS Evolved on PTX Series platforms allows an unauthenticated adjacent-network attacker to execute arbitrary code as root or cause denial of service via a specific CFM Message sent to a configured down-MEP with enhanced CFM mode enabled.
-
CVE-2026-101981
A Stack-based Buffer Overflow vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent LDP peer to cause an rpd crash or execute arbitrary code via a malformed LDP Label Mapping message.
-
CVE-2026-102176
A Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in the SDK service process of Juniper Networks Junos OS allows an unauthenticated network attacker to cause a denial of service or compromise the Routing Engine by sending specific packets when the SDK service and a JDAF routing instance are enabled.
-
CVE-2026-102050
A Stack-based Buffer Overflow vulnerability in the l2cpd daemon of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial of service in Layer 2 control-plane processing via LLDP packets received on an interface configured for LLDP. Repeated triggering may disrupt LLDP and other Layer 2 control protocols across the device.
-
CVE-2026-98968
In the Linux kernel, the following vulnerability has been resolved: amt: send the relay's General Query directly from the receive path An skb queued in a qdisc can outlive the tunnel it references through a raw pointer in skb->cb. For example, with igmp_qrv set to 1 on the relay a tunnel lives for 135s, so a netem delay of 180s on the amt device outlives it; when the tunnel expires and is freed, the subsequent dequeue triggers a use-after-free in amt_dev_xmit(). BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20 Call Trace: amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262] dev_hard_start_xmit+0x22f/0x620 sch_direct_xmit+0x12e/0xac0 netem_dequeue+0x333/0xc50 net_tx_action+0x35c/0xa60 amt_send_igmp_gq() and amt_send_mld_gq() are only called from amt_request_handler(), inside the rcu_read_lock_bh() section of amt_rcv(). amt_request_handler() already has the tunnel the query is for: it found or created it inside that section. Queuing the query with dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the Ethernet header and calls amt_send_membership_query() for that tunnel. Make that call directly from the two senders instead, the same way amt_send_advertisement() transmits from the receive path. The query never waits in a qdisc, the tunnel is only dereferenced inside the RCU section that found or created it, and nothing is stored in skb->cb, so no lookup or refcount is needed. Remove the query branch of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no users left. Behaviour changes: - The relay's own General Queries no longer pass through the amt device's egress path: its qdisc, tc egress (clsact/tcx), the netfilter egress hook and packet taps. They are still visible as UDP on the underlay. - A query that is sent successfully is no longer counted as tx_dropped. The old query branch left through the unlock label, which counted every sent query as dropped. - A query that reaches amt_dev_xmit() on a relay from elsewhere, such as a userspace querier, is now dropped at the IGMP/MLD type switch. Before, it trusted whatever skb->cb held, and a NULL tunnel hit the WARN_ON(1).
-
CVE-2026-101338
When a SVCB or HTTPS RR has filled the wire format RDATA up to the brim, another ECH parameter may overwrite the stack, and once beyond the limit, the base64 decoder can write attacker controlled data of unlimited size. Zone files which are written out by NSD itself, such as for zones for which the NSD instance is secondary, will not be formatted like this. The zone file must be fed to NSD directly, (but it could come, for example, from an operator controlled provisioning system).
-
CVE-2026-101927
A Heap-based Buffer Overflow vulnerability in eventd of Juniper Networks Junos OS and Junos OS Evolved on all platforms allows an unprivileged local attacker to cause a denial of service (DoS) or achieve privilege escalation to root via crafted IPC event messages.
-
CVE-2026-17518
Buffer Copy without Checking Size of Input in certain ASUS router models allows an adjacent authenticated user to corrupt device operations and cause a denial of service via an HTTP request with input exceeding the expected length. Refer to the ' Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information.
-
CVE-2026-84729
Out-of-bounds write in certain ASUS Router firmware allow an unauthenticated nearby attacker to write data beyond the intended buffer or potentially cause a denial-of-service (DoS) via a crafted packet. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-109157
A vulnerability was found in TRENDnet TEW-432BRP 3.10B20. Affected by this vulnerability is the function formTcpipSetup of the file /goform/formTcpipSetup. Performing a manipulation of the argument Name results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor confirms: "As this router was EOL'd in 2011, we have no way of testing if such vulnerability exists. We will notify our customers of a potential vulnerability on this product." This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-108893
A vulnerability was identified in Linksys E1700 up to 1.0.0.4.003. This issue affects the function setVlan of the file /goform/setVlan. Such manipulation of the argument vlan_set leads to stack-based buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-103410
An Integer Overflow vulnerability in the DPI certificate scanner in Juniper Networks Session Smart Router allows an unauthenticated remote attacker to cause a denial of service via a specially crafted TLS server certificate.
-
CVE-2026-133730
A flaw was found in dnsmasq, where a memory handling issue exists in its Dynamic Host Configuration Protocol for IPv6 (DHCPv6) relay processing. A remote attacker can exploit this vulnerability by sending a sequence of network packets to a system configured as a DHCPv6 relay. This causes the service to write data to previously freed memory and crash, resulting in a Denial of Service (DoS).
-
CVE-2026-102086
A NULL Pointer Dereference vulnerability in the DNS plugin of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS). When multiple DNS queries are received in a single flow session, where one query matches a Security Intelligence (SecIntel) feed and another query is sent for DNS Domain Generation Algorithm (DGA) analysis, an error in processing logging of these asynchronous tasks can lead to an FPC crash. The exact timing conditions are outside an attacker's direct control. This issue affects Junos OS on SRX Series: * All versions before 23.2R2-S7.7; * from 23.4 before 23.4R2-S8.13; * from 24.2 before 24.2R2-S5.5; * from 24.4 before 24.4R2-S4; * from 25.2 before 25.2R2-S1; * from 25.4 before 25.4R1-S2.
-
CVE-2026-102078
A Use After Free vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When web filtering for TCP traffic is configured, a high volume of DNS requests increases the likelihood of a flowd crash and restart, which leads to a complete service outage until the service has automatically recovered. This is a race condition outside the attacker's direct control. This issue affects Junos OS on SRX Series: * All versions before 23.2R2-S5; * from 23.4 before 23.4R2-S6; * from 24.2 before 24.2R2-S3; * from 24.4 before 24.4R2-S1; * from 25.2 before 25.2R1-S1, 25.2R2.
-
CVE-2026-111730
P-Net before 1.0.3 does not validate the LengthPeerStationName field of a CheckPeers block in get_check_peer(). The received length (up to 255) was used to copy data into the 241-byte peer station name buffer and to place the terminating NUL byte, so a crafted block writes up to 15 bytes past the end of the buffer. This can lead to a crash (denial of service) or potentially arbitrary code execution. Requires establishment of session that needs ADJACENT network access.
-
CVE-2026-76457
As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco NX-OS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76457 are related to out-of-bounds read issues that are grouped under the Common Weakness Enumeration (CWE) CWE-125.
-
CVE-2026-99081
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix DMA mapping length for padded small packets Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412 NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces: DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000 [fault reason 0x06] PTE Read access is not set bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001 ... NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out The fault address (0xfc499000) is on an exact 4KB page boundary, pointing to a DMA read buffer overrun. In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes), such as 42-byte untagged ARP frames, are padded: if (length < BNXT_MIN_PKT_SIZE) { pad = BNXT_MIN_PKT_SIZE - length; if (skb_pad(skb, pad)) goto tx_kick_pending; length = BNXT_MIN_PKT_SIZE; } mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); ... dma_unmap_len_set(tx_buf, len, len); However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes) and is left unadjusted after padding. Consequently, dma_map_single() and dma_unmap_len_set() map and track only 42 bytes. Later, the hardware TX buffer descriptor is programmed with the padded length: txbd->tx_bd_len_flags_type = cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags | TX_BD_FLAGS_PACKET_END); The NIC DMA engine is thus instructed to read 52 bytes from a region where only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB page (within 'pad' bytes of the next page), the hardware DMA read overruns into the unmapped adjacent page, triggering an IOMMU fault. This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic and races when toggling HW VLAN offload") because reserving extra VLAN headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data offsets and potentially causing small frames to land right against page boundaries. Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled, because padding might linearize the skb. This ensures skb->len and skb_headlen(skb) reflect the padded size so that dma_map_single() maps the full buffer and the descriptor length is consistent. This also removes the temporary 'pad' variable and masking logic. The padding is done after the SW USO branch, otherwise bnxt_sw_udp_gso_xmit() would account the padding as UDP payload and send it in extra segments. Note that SW USO segments are still not padded: with IPv4, a segment carrying less than 10 bytes of UDP payload (small gso_size, or a short last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE. This is a separate issue, left for a followup patch.
-
CVE-2026-111734
P-Net before 1.0.3 does not validate the length of a received Ethernet frame in pf_eth_recv() before reading the EtherType, any VLAN tags and the PROFINET FrameID. The VLAN tag loop had no upper bound, so a truncated frame, or a frame consisting only of VLAN tags, makes the function read past the end of the receive buffer. This can cause a crash (denial of service) or disclose memory content.
-
CVE-2026-93862
An out-of-bounds read vulnerability in the FireCluster Sync processing allows an attacker positioned on the cluster interconnect, such as a compromised cluster peer or an on-path network attacker, to repeatedly crash the firewall's cluster synchronization process by sending specially crafted network traffic, resulting in a sustained denial of service.
-
CVE-2026-76492
As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76492 are related to issues concerning null pointers that are grouped under the Common Weakness Enumeration (CWE) Base CWE-476.
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.