Drop everything.
Critical CVEs that are confirmed exploited or very likely to be. Newest first.
-
CVE-2017-8229
Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices allow an unauthenticated attacker to download the administrative credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable function that sets up the default credentials on the device. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function sub_436D6 in IDA pro is identified to be setting up the configuration for the device. If one scrolls to the address 0x000437C2 then one can see that /current_config is being set as an ALIAS for /mnt/mtd/Config folder on the device. If one TELNETs into the device and navigates to /mnt/mtd/Config folder, one can observe that it contains various files such as Account1, Account2, SHAACcount1, etc. This means that if one navigates to http://[IPofcamera]/current_config/Sha1Account1 then one should be able to view the content of the files. The security researchers assumed that this was only possible only after authentication to the device. However, when unauthenticated access tests were performed for the same URL as provided above, it was observed that the device file could be downloaded without any authentication.
-
CVE-2018-11686
The Publish Service in FlexPaper (later renamed FlowPaper) 2.3.6 allows remote code execution via setup.php and change_config.php.
-
CVE-2019-7256
Linear eMerge E3-Series devices allow Command Injections.
-
CVE-2019-7257
Linear eMerge E3-Series devices allow Unrestricted File Upload.
-
CVE-2019-7269
Linear eMerge 50P/5000P devices allow Authenticated Command Injection with root Code Execution.
-
CVE-2019-7276
Optergy Proton/Enterprise devices allow Remote Root Code Execution via a Backdoor Console.
-
CVE-2019-12583
Missing Access Control in the "Free Time" component of several Zyxel UAG, USG, and ZyWall devices allows a remote attacker to generate guest accounts by directly accessing the account generator. This can lead to unauthorised network access or Denial of Service.
-
CVE-2019-1619
A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper session management on affected DCNM software. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.
-
CVE-2019-1620
A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to upload arbitrary files on an affected device. The vulnerability is due to incorrect permission settings in affected DCNM software. An attacker could exploit this vulnerability by uploading specially crafted data to the affected device. A successful exploit could allow the attacker to write arbitrary files on the filesystem and execute code with root privileges on the affected device.
-
CVE-2019-2729
Vulnerability in the Oracle WebLogic Server component of Oracle Fusion Middleware (subcomponent: Web Services). Supported versions that are affected are 10.3.6.0.0, 12.1.3.0.0 and 12.2.1.3.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVSS 3.0 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2019-7839
ColdFusion versions Update 3 and earlier, Update 10 and earlier, and Update 18 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.
-
CVE-2010-5330
On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.
-
CVE-2018-20841
HooToo TripMate Titan HT-TM05 and HT-05 routers with firmware 2.000.022 and 2.000.082 allow remote command execution via shell metacharacters in the mac parameter of a protocol.csp?function=set&fname=security&opt=mac_table request.
-
CVE-2019-9879
The WPGraphQL 0.2.3 plugin for WordPress allows remote attackers to register a new user with admin privileges, whenever new user registrations are allowed. This is related to the registerUser mutation.
-
CVE-2019-12780
The Belkin Wemo Enabled Crock-Pot allows command injection in the Wemo UPnP API via the SmartDevURL argument to the SetSmartDevInfo action. A simple POST request to /upnp/control/basicevent1 can allow an attacker to execute commands without authentication.
-
CVE-2019-12196
A SQL injection vulnerability in /client/api/json/v2/nfareports/compareReport in Zoho ManageEngine NetFlow Analyzer 12.3 allows attackers to execute arbitrary SQL commands via the DeviceID parameter.
-
CVE-2019-11945
A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.
-
CVE-2019-10149
A flaw was found in Exim versions 4.87 to 4.91 (inclusive). Improper validation of recipient address in deliver_message() function in /src/deliver.c may lead to remote command execution.
-
CVE-2018-13379
An Improper Limitation of a Pathname to a Restricted Directory ("Path Traversal") in Fortinet FortiOS 6.0.0 to 6.0.4, 5.6.3 to 5.6.7 and 5.4.6 to 5.4.12 and FortiProxy 2.0.0, 1.2.0 to 1.2.8, 1.1.0 to 1.1.6, 1.0.0 to 1.0.7 under SSL VPN web portal allows an unauthenticated attacker to download system files via special crafted HTTP resource requests.
-
CVE-2018-13382
An Improper Authorization vulnerability in Fortinet FortiOS 6.0.0 to 6.0.4, 5.6.0 to 5.6.8 and 5.4.1 to 5.4.10 and FortiProxy 2.0.0, 1.2.0 to 1.2.8, 1.1.0 to 1.1.6, 1.0.0 to 1.0.7 under SSL VPN web portal allows an unauthenticated attacker to modify the password of an SSL VPN web portal user via specially crafted HTTP requests
-
CVE-2019-10883
Citrix SD-WAN Center 10.2.x before 10.2.1 and NetScaler SD-WAN Center 10.0.x before 10.0.7 allow Command Injection.
-
CVE-2019-11580
Atlassian Crowd and Crowd Data Center had the pdkinstall development plugin incorrectly enabled in release builds. Attackers who can send unauthenticated or authenticated requests to a Crowd or Crowd Data Center instance can exploit this vulnerability to install arbitrary plugins, which permits remote code execution on systems running a vulnerable version of Crowd or Crowd Data Center. All versions of Crowd from version 2.1.0 before 3.0.5 (the fixed version for 3.0.x), from version 3.1.0 before 3.1.6 (the fixed version for 3.1.x), from version 3.2.0 before 3.2.8 (the fixed version for 3.2.x), from version 3.3.0 before 3.3.5 (the fixed version for 3.3.x), and from version 3.4.0 before 3.4.4 (the fixed version for 3.4.x) are affected by this vulnerability.
-
CVE-2019-10123
SQL Injection in Advanced InfoData Systems (AIS) ESEL-Server 67 (which is the backend for the AIS logistics mobile app) allows an anonymous attacker to execute arbitrary code in the context of the user of the MSSQL database. The default user for the database is the 'sa' user.
-
CVE-2019-9874
Deserialization of Untrusted Data in the Sitecore.Security.AntiCSRF (aka anti CSRF) module in Sitecore CMS 7.0 to 7.2 and Sitecore XP 7.5 to 8.2 allows an unauthenticated attacker to execute arbitrary code by sending a serialized .NET object in the HTTP POST parameter __CSRFTOKEN.
-
CVE-2019-8457
SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.
-
CVE-2019-9670
mailboxd component in Synacor Zimbra Collaboration Suite 8.7.x before 8.7.11p10 has an XML External Entity injection (XXE) vulnerability, as demonstrated by Autodiscover/Autodiscover.xml.
-
CVE-2019-7816
ColdFusion versions Update 2 and earlier, Update 9 and earlier, and Update 17 and earlier have a file upload restriction bypass vulnerability. Successful exploitation could lead to arbitrary code execution.
-
CVE-2019-12314
Deltek Maconomy 2.2.5 is prone to local file inclusion via absolute path traversal in the WS.macx1.W_MCS/ PATH_INFO, as demonstrated by a cgi-bin/Maconomy/MaconomyWS.macx1.W_MCS/etc/passwd URI.
-
CVE-2018-7841
A SQL Injection (CWE-89) vulnerability exists in U.motion Builder software version 1.3.4 which could cause unwanted code execution when an improper set of characters is entered.
-
CVE-2019-11231
An issue was discovered in GetSimple CMS through 3.3.15. insufficient input sanitation in the theme-edit.php file allows upload of files with arbitrary content (PHP code, for example). This vulnerability is triggered by an authenticated user; however, authentication can be bypassed. According to the official documentation for installation step 10, an admin is required to upload all the files, including the .htaccess files, and run a health check. However, what is overlooked is that the Apache HTTP Server by default no longer enables the AllowOverride directive, leading to data/users/admin.xml password exposure. The passwords are hashed but this can be bypassed by starting with the data/other/authorization.xml API key. This allows one to target the session state, since they decided to roll their own implementation. The cookie_name is crafted information that can be leaked from the frontend (site name and version). If a someone leaks the API key and the admin username, then they can bypass authentication. To do so, they need to supply a cookie based on an SHA-1 computation of this known information. The vulnerability exists in the admin/theme-edit.php file. This file checks for forms submissions via POST requests, and for the csrf nonce. If the nonce sent is correct, then the file provided by the user is uploaded. There is a path traversal allowing write access outside the jailed themes directory root. Exploiting the traversal is not necessary because the .htaccess file is ignored. A contributing factor is that there isn't another check on the extension before saving the file, with the assumption that the parameter content is safe. This allows the creation of web accessible and executable files with arbitrary content.
-
CVE-2019-4279
IBM WebSphere Application Server 8.5 and 9.0 could allow a remote attacker to execute arbitrary code on the system with a specially-crafted sequence of serialized objects from untrusted sources. IBM X-Force ID: 160445.
-
CVE-2019-0708
A remote code execution vulnerability exists in Remote Desktop Services formerly known as Terminal Services when an unauthenticated attacker connects to the target system using RDP and sends specially crafted requests, aka 'Remote Desktop Services Remote Code Execution Vulnerability'.
-
CVE-2013-7285
Xstream API versions up to 1.4.6 and version 1.4.10, if the security framework has not been initialized, may allow a remote attacker to run arbitrary shell commands by manipulating the processed input stream when unmarshaling XML or any supported format. e.g. JSON.
-
CVE-2018-14839
LG N1A1 NAS 3718.510 is affected by: Remote Command Execution. The impact is: execute arbitrary code (remote). The attack vector is: HTTP POST with parameters.
-
CVE-2019-3568
A buffer overflow vulnerability in WhatsApp VOIP stack allowed remote code execution via specially crafted series of RTCP packets sent to a target phone number. The issue affects WhatsApp for Android prior to v2.19.134, WhatsApp Business for Android prior to v2.19.44, WhatsApp for iOS prior to v2.19.51, WhatsApp Business for iOS prior to v2.19.51, WhatsApp for Windows Phone prior to v2.18.348, and WhatsApp for Tizen prior to v2.18.15.
-
CVE-2019-9618
The GraceMedia Media Player plugin 1.0 for WordPress allows Local File Inclusion via the "cfg" parameter.
-
CVE-2018-19986
In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string.
-
CVE-2019-7442
An XML external entity (XXE) vulnerability in the Password Vault Web Access (PVWA) of CyberArk Enterprise Password Vault <=10.7 allows remote attackers to read arbitrary files or potentially bypass authentication via a crafted DTD in the SAML authentication system.
-
CVE-2019-11510
In Pulse Secure Pulse Connect Secure (PCS) 8.2 before 8.2R12.1, 8.3 before 8.3R7.1, and 9.0 before 9.0R3.4, an unauthenticated remote attacker can send a specially crafted URI to perform an arbitrary file reading vulnerability .
-
CVE-2019-8387
MASTER IPCAMERA01 3.3.4.2103 devices allow Remote Command Execution, related to the thttpd component.
-
CVE-2019-5434
An attacker could send a specifically crafted payload to the XML-RPC invocation script and trigger the unserialize() call on the "what" parameter in the "openads.spc" RPC method. Such vulnerability could be used to perform various types of attacks, e.g. exploit serialize-related PHP vulnerabilities or PHP object injection. It is possible, although unconfirmed, that the vulnerability has been used by some attackers in order to gain access to some Revive Adserver instances and deliver malware through them to third party websites. This vulnerability was addressed in version 4.2.0.
-
CVE-2017-18368
The ZyXEL P660HN-T1A v1 TCLinux Fw $7.3.15.0 v001 / 3.40(ULM.0)b31 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is accessible by an unauthenticated user. The vulnerability is in the ViewLog.asp page and can be exploited through the remote_host parameter.
-
CVE-2017-18369
The Billion 5200W-T 1.02b.rc5.dt49 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is accessible by an unauthenticated user. The vulnerability is in the adv_remotelog.asp page and can be exploited through the syslogServerAddr parameter.
-
CVE-2019-3929
The Crestron AM-100 firmware 1.6.0.2, Crestron AM-101 firmware 2.7.0.1, Barco wePresent WiPG-1000P firmware 2.3.0.10, Barco wePresent WiPG-1600W before firmware 2.4.1.19, Extron ShareLink 200/250 firmware 2.0.3.4, Teq AV IT WIPS710 firmware 1.1.0.7, SHARP PN-L703WA firmware 1.4.2.3, Optoma WPS-Pro firmware 1.0.0.5, Blackbox HD WPS firmware 1.0.0.5, InFocus LiteShow3 firmware 1.0.16, and InFocus LiteShow4 2.0.0.7 are vulnerable to command injection via the file_transfer.cgi HTTP endpoint. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root.
-
CVE-2019-11577
dhcpcd before 7.2.1 contains a buffer overflow in dhcp6_findna in dhcp6.c when reading NA/TA addresses.
-
CVE-2019-2725
Vulnerability in the Oracle WebLogic Server component of Oracle Fusion Middleware (subcomponent: Web Services). Supported versions that are affected are 10.3.6.0.0 and 12.1.3.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVSS 3.0 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2018-20434
LibreNMS 1.46 allows remote attackers to execute arbitrary OS commands by using the $_POST['community'] parameter to html/pages/addhost.inc.php during creation of a new device, and then making a /ajax_output.php?id=capture&format=text&type=snmpwalk&hostname=localhost request that triggers html/includes/output/capture.inc.php command mishandling.
-
CVE-2019-7214
SmarterTools SmarterMail 16.x before build 6985 allows deserialization of untrusted data. An unauthenticated attacker could run commands on the server when port 17001 was remotely accessible. This port is not accessible remotely by default after applying the Build 6985 patch.
-
CVE-2019-7304
Canonical snapd before version 2.37.1 incorrectly performed socket owner validation, allowing an attacker to run arbitrary commands as root. This issue affects: Canonical snapd versions prior to 2.37.1.
-
CVE-2019-9733
An issue was discovered in JFrog Artifactory 6.7.3. By default, the access-admin account is used to reset the password of the admin account in case an administrator gets locked out from the Artifactory console. This is only allowable from a connection directly from localhost, but providing a X-Forwarded-For HTTP header to the request allows an unauthenticated user to login with the default credentials of the access-admin account while bypassing the whitelist of allowed IP addresses. The access-admin account can use Artifactory's API to request authentication tokens for all users including the admin account and, in turn, assume full control of all artifacts and repositories managed by Artifactory.
A CVE is listed as major when it is critical (CVSS 9.0 or higher) and either confirmed exploited in the wild with a real chance of more, or very likely to be exploited (EPSS 40% or more).