Just published.
The newest CVEs, straight from CVE.org and NVD.
-
CVE-2026-126556
Invocation of Process Using Visible Sensitive Information, Insufficiently Protected Credentials vulnerability in Broadcom AutoSys Workload Automation (AutoSys engine (AE) native clients modules) on Windows, Linux allows Collect Data from Common Resource Locations.This issue affects AutoSys Workload Automation: 24.2.00-0210 and earlier (verified on 24.2.00-0210; earlier range unestablished), 24.2.01 (when the -pw/-pwx options are used).
-
CVE-2026-126557
Out-of-bounds Write vulnerability in Broadcom AutoSys Workload Automation (AutoSys engine (AE) native clients modules) on Windows, Linux allows Overflow Buffers.This issue affects AutoSys Workload Automation: from 12.1.00.00-0305 through 24.2.00-0210.
-
CVE-2026-126547
Missing Authorization vulnerability in Broadcom AutoSys Workload Automation (Workload Control Center (WCC) modules) on Windows, Linux allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects AutoSys Workload Automation: from 12.1 through 24.2.00.
-
CVE-2026-126549
Insertion of Sensitive Information into Log File vulnerability in Broadcom AutoSys Workload Automation (Workload Control Center (WCC) modules) on Windows, Linux allows Collect Data from Common Resource Locations.This issue affects AutoSys Workload Automation: from 12.1.00 through 24.2.00.
-
CVE-2026-100972
NVIDIA OpenShell for Linux contains a vulnerability in resource-level authorization for create, read, update, and delete operations where an authenticated remote attacker with low privileges could access or modify resources without the required authorization checks. A successful exploit of this vulnerability might lead to information disclosure and data tampering.
-
CVE-2026-100974
NVIDIA OpenShell for Linux contains a vulnerability in the sandbox SSH authentication component where a remote attacker with high privileges could gain unauthorized access to other sandboxes by using an SSH handshake secret shared across sandboxes. A successful exploit of this vulnerability might lead to information disclosure, data tampering, and denial of service.
-
CVE-2026-100975
NVIDIA OpenShell for Linux contains a vulnerability in the Kubernetes sandbox SSH authentication configuration where a local attacker with low privileges could obtain sensitive authentication information by accessing an SSH handshake secret stored in a plaintext environment variable and reuse the shared secret to gain unauthorized access to other sandboxes. A successful exploit of this vulnerability might lead to information disclosure, data tampering, and denial of service.
-
CVE-2026-130628
react-native-webview 13.7.0 through 17.1.0 on Windows contains an unrestricted URI scheme launch vulnerability in the WebView2 OnCoreWebView2NewWindowRequested handler, which passes requested URIs to LaunchUriAsync without scheme or user-initiation checks. Malicious web content can call window.open() or use target=_blank links with schemes like ms-settings: to launch Windows protocol handlers without the external-protocol confirmation prompt.
-
CVE-2026-130590
react-native-webview 11.25.1 through 17.1.0 on Android contains a denial of service vulnerability that allows web content to crash the host application via malformed Content-Disposition headers. Attackers can serve a download whose filename* parameter has invalid percent-encoding, triggering an uncaught IllegalArgumentException in URLUtil.parseContentDisposition on the main thread to terminate the app.
-
CVE-2026-129281
N-able N-central before 2026.4.1 HF3 checks only a view permission for ServerII2 operations that write device execution configuration. An authenticated user with view-only access to a device can set configuration that the Windows agent on that device acts on.
-
CVE-2026-130375
AdminNeo before 5.9.1 contains a remote code execution vulnerability that allows authenticated SQLite users to bypass the check_sqlite_name() extension guard using PDO_SQLite file: URI database names. Attackers can select the PDO driver with ext=pdo and submit names like file:/webroot/x.php?x=.db to create a .php file, then store PHP source as table data for code execution.
-
CVE-2026-130378
AdminNeo before 5.9.1 contains a filter injection vulnerability in its MongoDB driver that allows attackers to affect other documents by embedding ' AND ' or ') OR (' delimiters in a string _id or searched value. Attackers who can store a crafted document can cause a victim's delete or edit to match unintended documents, deleting the entire collection or modifying another document.
-
CVE-2026-130366
AdminNeo before 5.9.1 contains an authentication bypass vulnerability in the ClickHouse driver that allows remote attackers to log in to passwordless accounts without the configured defaultPasswordHash password. Attackers who know the name of a ClickHouse no_password account can submit any non-empty password, because connect() skips openPasswordless(), and obtain a session with that account's rights.
-
CVE-2026-130361
AdminNeo before 5.9.1 contains a parameter injection vulnerability in its ClickHouse driver that allows attackers to inject ClickHouse HTTP query parameters through an unencoded db GET parameter. Attackers can lure a logged-in victim into opening a crafted GET link that injects a query parameter, bypassing the POST-only CSRF token. ClickHouse then executes attacker-chosen SQL under the victim's credentials to read, modify, or drop data.
-
CVE-2026-130346
AdminNeo before 5.9.1 contains an sql injection vulnerability in the ClickHouse driver because idf_escape() doubles backticks but does not escape backslashes in identifiers. Attackers can lure a logged-in user into opening a GET link with a column name ending in a backslash in columns, where, or order parameters, causing query text to be parsed as SQL.
-
CVE-2026-130338
AdminNeo before 5.9.1 contains a stored sql injection vulnerability in the MySQL driver that allows database users with table creation rights to inject SQL through unescaped geometry column names in unconvert_field(). Attackers can craft a column name containing an SQL expression that executes with another AdminNeo user's privileges when they edit a row, save it, or export the table.
-
CVE-2026-93667
The Virtual L2 receive handler virtual_recv() in subsys/net/l2/virtual/virtual.c ends with a fall-through path meant for a virtual interface that has nothing attached below it: it takes net_if_get_device(iface)->api, treats it as a struct virtual_interface_api, and calls api->recv(iface, pkt). That handler is however also invoked with a non-virtual interface: ethernet_recv() in subsys/net/l2/ethernet/ethernet.c deliberately passes the Ethernet interface so that a tagged frame can be dispatched over the VLAN interfaces attached to it. For an Ethernet interface dev->api is a struct ethernet_api, whose layout only shares the leading struct net_if_api, so the slot read as recv is actually get_config() (default) or get_capabilities() (when CONFIG_NET_STATISTICS_ETHERNET is enabled). The fall-through is reached whenever no attached virtual interface claims the frame - most simply when the VLAN interface owning the frame's tag exists but is administratively down, since net_eth_get_vlan_iface() resolves the tag without checking link state while virtual_recv() skips interfaces that are not up. Any host able to place an 802.1Q-tagged Ethernet frame on the same link can then trigger the mistyped indirect call; no authentication, IP reachability or user interaction is required, because the frame is consumed at L2 before any address check. The resulting call passes a struct net_if where the driver expects a struct device and a struct net_pkt where it expects a struct net_if , with the callee's remaining parameters left as whatever the call site happens to leave in the argument registers. Driver implementations dereference these values: get_capabilities() typically reads dev->config/dev->data (a wild read through a non-pointer field of struct net_if), and get_config() implementations write through the uninitialized struct ethernet_config * argument. The practical impact is undefined behaviour in the network RX path - crashes and uncontrolled memory corruption - plus mis-handling of the packet when a capability bitmask is returned as a net_verdict. The attacker controls neither the corrupted address nor the value written, so this is a denial-of-service and memory-corruption issue rather than a controllable write primitive. The same defective fall-through is reachable through any_recv() in subsys/net/l2/dummy/any/any.c, which passes a dummy interface whose struct dummy_api is shorter than the offset read, producing an out-of-bounds read of the driver's API object followed by an indirect call. The fix drops any packet whose interface is not a Virtual L2 interface, closing both entry points.
-
CVE-2026-93669
The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80). If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself. The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows. The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm.
-
CVE-2026-93670
The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.
-
CVE-2026-62336
qbee-agent is the device agent component of the qbee.io IoT device management platform. Prior to 2026.27, the privileged createFile helper followed attacker-controlled symbolic links during file creation. A local unprivileged user whose account is managed by the SSH Keys bundle could replace ~/.ssh with a link to /root/.ssh, causing the agent to write an authorized key for root. On systems using RAUC download mode with ineffective kernel symlink protection, the predictable /tmp/.bundle.raucb.part path could be linked to a system file and then overwritten or truncated during an update. A file-distribution destination beneath an attacker-controlled directory could similarly redirect the partial-download path so the agent changed ownership of a sensitive file. These vectors could result in root privilege escalation, arbitrary file modification, or denial of service. This issue is fixed in version 2026.27.
-
CVE-2026-124019
VB-Audio VB-CABLE before 3.5.2.0 contains out-of-bounds read and write vulnerabilities in the vbaudio_cable64_win10.sys kernel streaming driver's KSPROPSETID_Audio MUTE, VOLUMELEVEL, and PEAKMETER2 property handlers that allow a local standard user to supply an all-channels sentinel value improperly used as a loop terminator or array index instead of being bounds-checked. Attackers can exploit the accessible low-integrity KS filter device object to write attacker-controlled values sequentially into kernel memory, corrupting kernel globals and object pointers, or read past an array boundary to leak kernel memory, resulting in local privilege escalation or denial of service via a kernel bug check.
-
CVE-2026-104692
LibreOffice bundles the HSQLDB database engine, which can be used through the generic JDBC database driver as well as through the support for embedded databases. HSQLDB lets SQL statements call Java methods, limited to the classes that are permitted. When HSQLDB was used through the generic JDBC driver this limit did not apply, so SQL in a crafted document could call any Java method and run code. In fixed versions SQL can call only the built-in functions of HSQLDB, whichever way the database is reached.
-
CVE-2026-63246
A kernel pool buffer overflow vulnerability in the ct0531fl.sys file of the Creative WDM Audio Driver (64-bit), Sound Blaster Audigy 4 and Sound Blaster Audigy 5/Rx could allow a local attacker with low privilege access to cause a denial of service.
-
CVE-2026-15707
An uncontrolled search path vulnerability (CWE-427) in statically linked OpenSSL libraries within Netskope Client (stAgentSvc.exe) and Endpoint DLP (epdlp.exe) on Windows allows an authenticated local attacker to execute arbitrary code with elevated SYSTEM privileges. The services retain internal build-time paths referencing a secondary drive location. On Windows systems where default volume permissions allow standard users to create root-level directories on secondary drives, an attacker can place a malicious configuration file (openssl.cnf) that is loaded under the NT AUTHORITY\SYSTEM context upon service startup or system reboot. Under default operating system permissions, macOS and Linux are not susceptible, and mobile platforms are unaffected.
-
CVE-2026-63245
A local privilege escalation (LPE) vulnerability in the Audigy Rx driver’s Emupia2k.sys file could allow a local attacker with low privilege access to gain higher privileges, such as administrator rights.
-
CVE-2026-99309
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check in build_sec_desc() When the large dacl_offset is provided, dacl_offset + sizeof(struct smb_acl) overflows on 32-bit builds and the check is passed, Which makes le16_to_cpu(ppdacl_ptr->size) read out-of-bounds. This only happens for dacl_offset in range [0xFFFFFFF8, 0xFFFFFFFF]. So the oob read is max 8 bytes preceding the allocated ppntsd. unsigned int dacl_offset = le32_to_cpu(ppntsd->dacloffset); int ppdacl_size, ntacl_size = ppntsd_size - dacl_offset; if (!dacl_offset || (dacl_offset + sizeof(struct smb_acl) > ppntsd_size)) goto out; Commit beff0bc9d69b ("ksmbd: fix overflow in dacloffset bounds check") fixes similar checks in other functions. But leaves this one out, because it is only valid for 32-bit builds. Reproduced on 32-bit ARM with KASAN, by a client sending SMB2 SET_INFO(SEC) with dacloffset=0xfffffff8, then QUERY_INFO(SEC) on the same file: BUG: KASAN: slab-out-of-bounds in build_sec_desc (fs/smb/server/smbacl.c:1105) Read of size 2 at addr c2a273fa by task kworker/1:1/35 CPU: 1 UID: 0 PID: 35 Comm: kworker/1:1 Not tainted 7.3.0-rc2+ #5 Workqueue: ksmbd-io handle_ksmbd_work Call trace: kasan_check_range from build_sec_desc (fs/smb/server/smbacl.c:1105) build_sec_desc from smb2_query_info (fs/smb/server/smb2pdu.c:7676) smb2_query_info from handle_ksmbd_work (fs/smb/server/server.c:160) handle_ksmbd_work from process_one_work (kernel/workqueue.c:3401) process_one_work from worker_thread (kernel/workqueue.c:3473) worker_thread from kthread (kernel/kthread.c:436) Add overflow check.
-
CVE-2026-99310
In the Linux kernel, the following vulnerability has been resolved: nfsd: hold cl_lock in client_has_openowners() client_has_openowners() walks clp->cl_openowners and reads so_stateids without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched creds can use-after-free the nfs4_openowner. BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140 fs/nfsd/nfs4state.c:3718 client_has_openowners() nfsd4_exchange_id nfsd4_proc_compound nfsd_dispatch svc_process Take clp->cl_lock while client_has_openowners() walks the openowner list.
-
CVE-2026-99311
In the Linux kernel, the following vulnerability has been resolved: udf: fix return value for non-recorded-allocated extents in udf_map_block() When someone creates a corrupted UDF filesystem where symlink contains other extent type than EXT_RECORDED_ALLOCATED, it can leads to a crash like: Oops: general protection fault KASAN: maybe wild-memory-access RIP: 0010:page_get_link (fs/namei.c:6503) Call Trace: vfs_readlink (fs/namei.c:6419) do_readlinkat (fs/stat.c:583) __x64_sys_readlink (fs/stat.c:605 fs/stat.c:602 fs/stat.c:602) This is because in this case udf_map_block() fails to convert return value of inode_bmap() from 1 to 0. Returned '1' propagates through udf_bread() all the way up to __page_get_link() where it ends up being treated as a folio pointer with obvious results. Move the reset to 0 line outside the if, so udf_map_block() returns either 0 or -errno, even if the extent type is not EXT_RECORDED_ALLOCATED.
-
CVE-2026-99305
In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and rebuilds it, but fbcon holds raw pointers into that list in fb_display[i].mode and nothing un-publishes them the way do_unregister_framebuffer() and store_modes() do with fbcon_delete_modelist(). The function does refuse to install a new mode while the framebuffer has users (dlfb->fb_count != 0), but only after the list is already destroyed. Reached from the 0666 "edid" sysfs attribute, an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with -EINVAL and still leaves every fb_display[i].mode dangling; the next console switch reads the freed fb_videomode in fb_videomode_to_var(). Test fb_count before touching the list. fbcon takes a reference through fbcon_open(), so that condition covers exactly the states in which fb_display[] points into the list, and the errno returned to userspace is unchanged. BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47 Workqueue: events console_callback Call Trace: fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) display_to_var (drivers/video/fbdev/core/fbcon.c:998) fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182) redraw_screen (drivers/tty/vt/vt.c:994) complete_change_console (drivers/tty/vt/vt_ioctl.c:1141) console_callback (drivers/tty/vt/vt.c:3358) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 28 bytes inside of freed 96-byte region [ffff8880107b4480, ffff8880107b44e0)
-
CVE-2026-99306
In the Linux kernel, the following vulnerability has been resolved: ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks it with newmap->possible_max_rank, which comes straight off the wire: ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then overwrites it with the size of the "in" set. Neither is bounded by CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks than the bitmap holds makes test_bit() read past the end of targets[]. The clear_bit() loop above indexes the same bitmap, though it is additionally bounded by mdsc->max_sessions. The map arrives on the monitor connection, which is unauthenticated in legacy msgr mode. CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the reserved inode ranges in super.h are laid out one rank apart over that span, so a map claiming more ranks is corrupt. Reject it where the rank space is established rather than letting the count reach check_new_map(). BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968) Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127 Workqueue: ceph-msgr ceph_con_workfn Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) check_new_map (fs/ceph/mds_client.c:5968) ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060) extra_mon_dispatch (fs/ceph/super.c:802) mon_dispatch (net/ceph/mon_client.c:1483) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> The buggy address belongs to stack of task kworker/1:2/127 and is located at offset 288 in frame: check_new_map (fs/ceph/mds_client.c:5846) This frame has 1 object: [32, 288) 'targets'
-
CVE-2026-99307
In the Linux kernel, the following vulnerability has been resolved: ceph: require the dentry lease record to cover struct ceph_mds_reply_lease parse_reply_info_lease() reads a 32-bit struct_len off the wire and only checks that many bytes are present, without requiring struct_len to cover sizeof(struct ceph_mds_reply_lease) (10 bytes). A malicious MDS can declare a shorter record and still get the pointer published: the following *p += sizeof(**lease) overshoot is undone by *p = lend, so nothing downstream rejects the reply. ceph_fill_trace() -> update_dentry_lease() then reads 10 bytes through that pointer on any lookup on a mounted CephFS, running past the end of the message front. Require the record to cover the structure, matching the sibling parse_reply_info_dir(). A conforming MDS always encodes the full 10 bytes. BUG: KASAN: slab-out-of-bounds in __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) Read of size 4 at addr ffff888026c63d65 by task kworker/0:3/2366 Workqueue: ceph-msgr ceph_con_workfn Call Trace: __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) ceph_fill_trace (fs/ceph/inode.c:1474 fs/ceph/inode.c:1823) mds_dispatch (fs/ceph/mds_client.c:4229 fs/ceph/mds_client.c:7225) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address is located 357 bytes inside of allocated 360-byte region [ffff888026c63c00, ffff888026c63d68)
-
CVE-2026-99308
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.
-
CVE-2026-99302
In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: reject short connection requests nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The iWARP path allocates exactly the peer-provided length, so a six-byte MPA request reaches the parser and the hsqsize load reads two bytes past the allocation. Require the complete request structure before reading any of its fields. The decoded KASAN report is: BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41 Workqueue: iw_cm_wq cm_work_handler Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) cma_cm_event_handler (drivers/infiniband/core/cma.c:2181) iw_conn_req_handler (drivers/infiniband/core/cma.c:2640) cm_work_handler (drivers/infiniband/core/cm.c:2502 drivers/infiniband/core/cm.c:3858) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Allocated by task 12: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_node_track_caller_noprof (mm/slub.c:5414 mm/slub.c:5545) kmemdup_noprof (mm/util.c:138) cm_event_handler (drivers/infiniband/core/iwcm.c:194 drivers/infiniband/core/iwcm.c:1076) siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408) siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750) siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086) The buggy address is located 0 bytes to the right of allocated 6-byte region [ff1100010459d360, ff1100010459d366)
-
CVE-2026-99303
In the Linux kernel, the following vulnerability has been resolved: speakup: Fix NULL pointer dereference on VT switch + selection When selecting/pasting very quickly after VT switch, the tty is not set yet, leading to a NULL dereference. We can just abort the operation.
-
CVE-2026-99304
In the Linux kernel, the following vulnerability has been resolved: ceph: fix integer overflow in the snap trace bounds check ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps + num_prior_parent_snaps). Both counts come straight off the wire as __le32, so the addition is evaluated in unsigned int and wraps before sizeof(u64) promotes it to size_t: an MDS sending num_snaps = 1 and num_prior_parent_snaps = 0xffffffff makes the sum zero and the check degenerates to ceph_decode_need(&p, e, 0, bad), which always passes. dup_array() then reads num_snaps * 8 bytes past the end of the message front, which ceph_msg_new2() allocates at exactly front_len bytes. An unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or compromised MDS with no client-side action, as do the snaptraces carried in an MDS reply and in a cap import. Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX instead of wrapping, in the style fs/ceph/mdsmap.c already uses for num_export_targets. BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) ceph_update_snap_trace (fs/ceph/snap.c:836) ceph_handle_snap (fs/ceph/snap.c:1155) mds_dispatch (fs/ceph/mds_client.c:7234) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 0 bytes to the right of allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8)
-
CVE-2026-99298
In the Linux kernel, the following vulnerability has been resolved: net: ipv4: add zero check for snd_cwnd_clamp When RTAX_CWND is locked, user is able to pass 0 into it. This could lead to writing 0 to tp->snd_cwnd, leading to a division by zero error. Oops: divide error: 0000 [#1] SMP KASAN NOPTI Call Trace: <IRQ> tcp_reno_cong_avoid (net/ipv4/tcp_cong.c:510 (discriminator 1)) tcp_ack (net/ipv4/tcp_input.c:3517 net/ipv4/tcp_input.c:3873 net/ipv4/tcp_input.c:4440) tcp_rcv_established (net/ipv4/tcp_input.c:6685) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1854) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2248) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207 (discriminator 1)) ip_local_deliver_finish (net/ipv4/ip_input.c:241 (discriminator 1)) ip_local_deliver (./include/linux/netfilter.h:325 ./include/linux/netfilter.h:319 net/ipv4/ip_input.c:262) ip_rcv (./include/net/dst.h:481 (discriminator 6) net/ipv4/ip_input.c:492 (discriminator 6) ./include/linux/netfilter.h:325 (discriminator 6) ./include/li) __netif_receive_skb_one_core (net/core/dev.c:6297 (discriminator 4)) __netif_receive_skb (net/core/dev.c:6410) process_backlog (net/core/dev.c:6761) __napi_poll.constprop.0 (net/core/dev.c:7830) net_rx_action (net/core/dev.c:7893 net/core/dev.c:8050) handle_softirqs (kernel/softirq.c:645) __irq_exit_rcu (kernel/softirq.c:679 kernel/softirq.c:519 kernel/softirq.c:758) irq_exit_rcu (kernel/softirq.c:775) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1062 (discriminator 35) arch/x86/kernel/apic/apic.c:1062 (discriminator 35)) RIP: 0010:tcp_cong_avoid_ai (net/ipv4/tcp_cong.c:482) Fix by checking if user pass in zero as parameter and if lock is present.
-
CVE-2026-99299
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: reject audio endpoint with zero packet size em28xx_audio_urb_init() divides by the audio endpoint's wMaxPacketSize without checking it, so a USB device that declares a zero-sized audio endpoint divides by zero at probe time. Reject a zero-sized audio endpoint like a missing one; the caller already unwinds on a negative return. Oops: divide error: 0000 [#1] SMP NOPTI Workqueue: usb_hub_wq hub_event RIP: 0010:em28xx_audio_init (drivers/media/usb/em28xx/em28xx-audio.c:718) Call Trace: em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) em28xx_init_dev.isra.0 (drivers/media/usb/em28xx/em28xx-cards.c:3887) em28xx_usb_probe (drivers/media/usb/em28xx/em28xx-cards.c:4258) usb_probe_interface (drivers/usb/core/driver.c:396) ... usb_set_configuration (drivers/usb/core/message.c:2268) usb_generic_driver_probe (drivers/usb/core/generic.c:250) usb_probe_device (drivers/usb/core/driver.c:291) ... usb_new_device (drivers/usb/core/hub.c:2703) hub_event (drivers/usb/core/hub.c:5961) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-99300
In the Linux kernel, the following vulnerability has been resolved: media: go7007: only set audio_enabled if go7007_snd_init() succeeded go7007_register_encoder() sets go->audio_enabled before calling go7007_snd_init() and discards its return value. go7007_snd_init() assigns go->snd_context only on success, so a failed ALSA setup leaves audio_enabled set with snd_context still NULL. The disconnect path tests audio_enabled and calls go7007_snd_remove(), which dereferences snd_context unconditionally. go7007_snd_init() returns -ENODEV once its never-decremented static card counter reaches SNDRV_CARDS, so SNDRV_CARDS attach/detach cycles arm the next attach; no memory pressure is needed. Set go->audio_enabled only once go7007_snd_init() has succeeded. Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: usb_hub_wq hub_event RIP: 0010:go7007_snd_remove (drivers/media/usb/go7007/snd-go7007.c:273) Call Trace: go7007_usb_disconnect (drivers/media/usb/go7007/go7007-usb.c:1336) usb_unbind_interface (drivers/usb/core/driver.c:461) device_remove (drivers/base/dd.c:618) device_release_driver_internal (drivers/base/dd.c:1349) bus_remove_device (drivers/base/bus.c:664) device_del (drivers/base/core.c:3965) usb_disable_device (drivers/usb/core/message.c:1478) usb_disconnect hub_event (drivers/usb/core/hub.c:5966) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-99301
In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.
-
CVE-2026-99294
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fwd_netdev: use recursion counter in neigh egress path nft_fwd_neigh can be used in egress chains (NF_NETDEV_EGRESS). When the forwarding rule targets the same device or two devices forward to each other, neigh_xmit() triggers dev_queue_xmit() which re-enters nf_hook_egress(), causing infinite recursion and stack overflow. Move the nf_get_nf_dup_skb_recursion() accessor and NF_RECURSION_LIMIT to the shared header nf_dup_netdev.h as a static inline, so that nft_fwd_netdev can use the recursion counter directly without exported function call overhead. Guard neigh_xmit() with the same recursion limit already used in nf_do_netdev_egress(). [ Updated to cache the nf_get_nf_dup_skb_recursion pointer. --pablo ]
-
CVE-2026-99295
In the Linux kernel, the following vulnerability has been resolved: smb: client: stop processing a read response after a receive error cifs_read_iter_from_socket() may call cifs_reconnect() before returning an error. The reconnect path aborts pending mids and invokes their callbacks. The callback can then release the cifs_io_subrequest containing rdata. cifs_readv_receive() nevertheless continues after a negative return and may dereference rdata in cifs_readv_discard(). KASAN reports the resulting UAF: BUG: KASAN: slab-use-after-free in cifs_readv_receive Read of size 4 by task cifsd cifs_readv_receive (fs/smb/client/transport.c:1284) cifs_demultiplex_thread (fs/smb/client/connect.c:1355) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Freed by task 148: netfs_put_subrequest (fs/netfs/objects.c:267) netfs_read_collection (fs/netfs/read_collect.c:460) netfs_wait_for_in_progress (fs/netfs/misc.c:462) Return the socket error immediately, as this path did before the iterator conversion. This also avoids adding a negative length to total_read.
-
CVE-2026-99296
In the Linux kernel, the following vulnerability has been resolved: libceph: bound mon_command ack decode to front len handle_command_ack() bounds the decode with msg->front_alloc_len, the size of the reply buffer, instead of msg->front.iov_len, the number of bytes the monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to get_generic_reply(), which returns the preallocated ->reply of whichever generic request carries the same tid, so the buffer keeps its fixed size however short the reply is. An ack with hdr.front_len below sizeof(struct ceph_mon_request_header) + sizeof(u32), including 0, still passes ceph_decode_need(), and ceph_decode_32() returns four bytes that were never received: uninitialized slab memory, stale bytes of an earlier message, or bytes the peer planted by sending a reply that lands in the same buffer and is then rejected. The read stays within the allocation, so KASAN does not flag it. req->result reaches userspace through ceph_monc_do_statfs(), ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes it to ERR_PTR() unchecked, which faults: rbd: failed to get latest osdmap: -186318427 BUG: unable to handle page fault for address: fffffbfffe9ca034 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105) Call Trace: ... kernfs_fop_write_iter (fs/kernfs/file.c:345) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception Use msg->front.iov_len, matching handle_subscribe_ack(), handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply(). A well-formed ack has front.iov_len >= 22 and is unaffected; a short one takes the existing bad: path. This applies commit d3c32939fa0e ("libceph: bound get_version reply decode to front len") to the last decode-side use of front_alloc_len in this file.
-
CVE-2026-99297
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix double free in em28xx_alloc_urbs When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs() explicitly frees all items within usb_bufs->buf before calling em28xx_uninit_usb_xfer(), which also frees these items, causing them to be freed twice. BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) Free of addr ffff88802fd37c00 by task kworker/1:2/1182 Workqueue: events request_module_async Call Trace: kasan_report_invalid_free (mm/kasan/report.c:557) check_slab_allocation (mm/kasan/common.c:235) kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1)) usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) usb_free_urb (drivers/usb/core/urb.c:95) em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439) em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Freed by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer() handle the cleanup.
-
CVE-2026-99290
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free after a failed durable reconnect ksmbd_reopen_durable_fd() republishes a detached durable handle in the reconnecting session's file table and takes no reference for that entry. If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to remove the volatile id. Two reconnects of the same handle can both take a lookup reference before either attaches it. If the one that reopens first then fails and drops its references first, the other request makes the final put through ksmbd_put_durable_fd(). That frees the handle without removing the first session's table entry, so tearing that session down writes to freed memory. BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd] Call Trace: __close_file_table_ids+0x14d/0x740 [ksmbd] ksmbd_destroy_file_table+0x76/0x100 [ksmbd] ksmbd_session_destroy+0xf8/0x480 [ksmbd] ksmbd_dispose_sessions+0x13e/0x200 [ksmbd] ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd] Freed by task 1030: __ksmbd_close_fd+0x97d/0x1000 [ksmbd] smb2_open+0x14eb/0xd9f0 [ksmbd] Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file lifetime") handles a final put made by the reconnecting request, but not one made by another holder. Remove the volatile id under the file-table lock on this error path, before the references are dropped, as ksmbd_close_fd() does on the request_open path just above. Removal then no longer depends on which holder makes the final put. The stale comment in the reconnect cleanup is updated to match. A successful reconnect is unchanged.
-
CVE-2026-99291
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix SMB2 CREATE response buffer overflow smb2_allocate_rsp_buf() uses the MAX_CIFS_SMALL_BUFFER_SIZE (448-byte) buffer for a single SMB2_CREATE response. That buffer also holds a 4-byte length field, which only leaves 444 bytes for the SMB2 body. The AAPL response made this buffer too small. After 8f1b796ff113, a request with AAPL response contexts may need at least 456 bytes. In the 456-byte case, create_aapl_rsp_buf() is appended last, clears 128 bytes, and writes 12 bytes past the allocation. KASAN reports: BUG: KASAN: slab-out-of-bounds in create_aapl_rsp_buf+0x31/0x6e0 Write of size 128 at addr ffff88800370954c by task kworker/0:0/9 ... create_aapl_rsp_buf+0x31/0x6e0 smb2_open+0x58f9/0xef10 ... smb2_allocate_rsp_buf+0x19d/0x370 ... The buggy address is located 332 bytes inside of allocated 448-byte region [ffff888003709400, ffff8880037095c0) Reserve enough space for any fixed CREATE response KSMBD can build. Store the required allocation size in the per-dialect values table. This keeps the small buffer for other commands and avoids using the max transaction buffer for every CREATE.
-
CVE-2026-99292
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl() In id_mode_to_cifs_acl(), while the chown branch reserves sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_acl) and the worst-case ACE space after commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or 5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace) on posix). However, the chmod branch also invokes build_sec_desc() -> copy_sec_desc(), which unconditionally writes the Owner SID at pnntsd + sidsoffset and the Group SID at pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total), and set_chmod_dacl() always writes a struct smb_acl header (8 bytes) even when the source descriptor has dacloffset == 0. When a security descriptor has compact or overlapping Owner/Group SIDs (or dacloffset == 0), calling chmod() under-allocates pnntsd and writes past the end of the slab buffer. Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_ntsd) on the posix path) in the chmod branch of id_mode_to_cifs_acl().
-
CVE-2026-99293
In the Linux kernel, the following vulnerability has been resolved: fuse: don't BUG when the copy buffer is exhausted fuse_copy_fill() hits BUG_ON(!err) once the iterator backing the copy runs out of pages. Over io-uring the amount copied is not bounded by the payload buffer the server registered, so an unprivileged user can drain the iterator and panic the host - mount a FUSE filesystem with small payload buffers, then setxattr() a larger value: kernel BUG at fs/fuse/dev.c:1064! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 148 Comm: exploit Not tainted 7.3.0-rc1 #2 RIP: 0010:fuse_copy_fill (fs/fuse/dev.c:1033) Call Trace: <TASK> fuse_copy_args (fs/fuse/dev.c:1354 fs/fuse/dev.c:1380) fuse_uring_args_to_ring (fs/fuse/dev_uring.c:891) fuse_uring_prepare_send (fs/fuse/dev_uring.c:940 fs/fuse/dev_uring.c:1057) fuse_uring_send_in_task (fs/fuse/dev_uring.c:1745) tctx_task_work_run (io_uring/tw.c:96) tctx_task_work (io_uring/tw.c:133) task_work_run (kernel/task_work.c:233) io_run_task_work (io_uring/tw.h:84) io_cqring_wait (io_uring/wait.c:278) __do_sys_io_uring_enter (io_uring/io_uring.c:2676) do_syscall_64 (arch/x86/entry/syscall_64.c:61) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The reply path can drain it the same way, via the server-supplied payload_sz in fuse_uring_copy_from_ring(). Return -EIO instead. All three fuse_copy_fill() callers already propagate the error.
-
CVE-2026-99289
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix app-instance non-durable supersede session UAF ksmbd_close_fd_app_instance_id() supersedes a prior open that has the same AppInstanceId. It reaches that open's session through opinfo->sess. This pointer is not refcounted. Session teardown detaches durable handles before it frees the session. It does not detach a non-durable open. That open still points at the session through opinfo->sess after the session is freed. Another session can supersede the open at the same time. The supersede then takes a write lock through the stale pointer, in the freed session's file table. BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0 Call Trace: _raw_write_lock+0x71/0xd0 ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd] smb2_open+0x3e10/0xd910 [ksmbd] Freed by task 212: ksmbd_session_destroy+0x38d/0x480 [ksmbd] Fix this by looking the session up by opinfo->session_id. The lookup returns a reference, as smb2_break_collect_channels() does. Recheck that opinfo->sess still points at it before using it. Do the lookup without m_lock held. destroy_previous_session() takes m_lock under the session table lock, and taking them in the other order here would deadlock.
-
CVE-2026-129359
A security flaw has been discovered in Linux Foundation Magma up to 1.9.0. The affected element is an unknown function of the file orc8r/lib/go/registry/interceptors.go. Performing a manipulation results in hard-coded credentials. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-129255
A vulnerability was identified in CoolerMaster MASTERPLUS+ 1.9.6. This affects the function sub_11504 in the library WinRing0x64.sys of the component Device Driver. The manipulation of the argument PhysicalAddress leads to incorrect default permissions. The attack can only be performed from a local environment. The vendor was contacted early about this disclosure but did not respond in any way.
The newest published CVE records from CVE.org and NVD, refreshed every few minutes, with severity, exploit odds and fix status.