Other CVEs.
Published CVEs classified as other, ranked by exploit odds.
-
CVE-2026-99352
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: trace an accepted transport before publishing it svc_handle_xprt() publishes a newly accepted transport before tracing it. svc_add_new_temp_xprt() places the transport on sv_tempsocks and clears XPT_BUSY, so another nfsd thread can dequeue it at once. If the peer has already closed the connection, that thread runs svc_delete_xprt(), which drops the list reference, the only reference the new transport holds. trace_svc_xprt_accept() then reads the transport's addresses and network namespace from freed memory. Before publication the accepting thread owns the transport exclusively: XPT_BUSY is still set from svc_xprt_init() and the transport is on no list. Emit the tracepoint there. [ cel: trace before publication instead of taking an extra reference ]
-
CVE-2026-99354
In the Linux kernel, the following vulnerability has been resolved: sunrpc: pin gss module across auth_domain RCU free A gss auth_domain stores a raw pointer to svcauthops_gss in dom->flavour, and its release queues svcauth_gss_domain_release_rcu() via call_rcu(). Both live in auth_rpcgss.ko text, and nothing pins the module while a domain referencing it is reachable. rmmod auth_rpcgss can therefore unmap that text while an NFSD export still holds a reference to the domain. The export cache is one such holder. When the export is finally released, the domain reference drops from module text: svc_export_put() auth_domain_put(exp->ex_client) auth_domain_release() dom->flavour->domain_release(dom) /* into module text */ svcauth_gss_domain_release() call_rcu(&dom->rcu_head, svcauth_gss_domain_release_rcu) Once auth_rpcgss is unloaded, the domain_release call lands in unmapped memory. The rcu_barrier() in exit_rpcsec_gss() does not help: it waits only for callbacks already queued, and this one is not queued until the export goes away. NFSD's NFSv4 objects import symbols from auth_rpcgss.ko, so only a server built without CONFIG_NFSD_V4 can unload auth_rpcgss while exports still name a gss domain. Take a module reference in svcauth_gss_register_pseudoflavor() before publishing the domain and drop it at the end of svcauth_gss_domain_release_rcu(). The rcu_barrier() then holds the module image until this callback has returned. [ cel: rewrote description ]
-
CVE-2026-99341
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Request event processing for exception VM-Exits Request event processing whenever kvm_queue_exception_vmexit() queues an exception VM-Exit. Most callers reach the helper through kvm_multiple_exception(), which already sets KVM_REQ_EVENT, but nested asynchronous page faults call it directly. Without another event request, vcpu_enter_guest() skips kvm_check_and_inject_events() and re-enters L2. A subsequent VM-Exit can clear the pending exception while reconstructing vectoring state, losing the synthetic #PF VM-Exit. The APF reason remains PAGE_NOT_PRESENT and a later regular #PF can consume the stale value. Setting KVM_REQ_EVENT in the common helper ensures that L1 receives the queued VM-Exit before KVM re-enters L2.
-
CVE-2026-99342
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Enforce 4-byte alignment of vcpu_info registration Xen's map_guest_area() enforces that vcpu_info is aligned to sizeof(xen_ulong_t). KVM has no such check, allowing a guest to register vcpu_info at an arbitrary byte alignment. Enforce unconditional 4-byte alignment regardless of the current shinfo mode. This is sufficient because subsequent commits ensure that all locked atomic operations on vcpu_info fields use at most 32-bit accesses. Return -ENXIO on failure, matching Xen's map_guest_area() behaviour for unaligned requests. Originally observed in review of an unrelated patch: https://lore.kernel.org/all/[email protected]/
-
CVE-2026-99343
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bug the VM if KVM attempts to walk more levels than the MMU has Extend the "EFER.LMA && !CR4.PAE" check, which exists largely to guard against KVM configuring a paging32 MMU with more than 2 levels of paging, with a very explicit check for exactly that: that KVM isn't trying to walk more levels of paging than the MMU template provides. I.e. harden KVM against all bugs that would cause KVM to generates accesses beyond the bounds of guest_walker's arrays, regardless of how KVM ended up with the misconfigured MMU. Note, don't use w->cpu_role.base.level directly as the paging64 template only provides two levels of page tables for PAE paging on 32-bit hosts, and handles the third level by manually emulating the PDPTR access.
-
CVE-2026-99344
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore EFER.LMA if EFER.LME=0 when preparing L2 state Force EFER.LMA=0 if EFER.LME=0 when preparing L2 state for VMRUN, i.e. mimic real hardware's behavior of ignoring EFER.LMA if EFER.LME=0. VMRUN unfortunately allows the nonsensical combination, i.e. doesn't fail, but KVM itself has an invariant EFER.LMA can be set et if and only if EFER.LME is set. Breaking that invariant can lead to a variety of issue, particularly in MMU code that keys off EFER.LMA when determining whether to emulate/virtualization 4/5-level paging versus PAE paging.
-
CVE-2026-99345
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Reject KVM_SET_NESTED_STATE if L1 has EFER.LMA=1 && EFER.LME=0 Reject KVM_SET_NESTED_STATE if the incoming L1 host state has what is effectively an impossible EFER combination of LMA=1 but LME=0, i.e. if the state says long mode is active but not enabled. Unlike VMX, SVM doesn't have an explicit consistent check for the illegal combination; presumably hardware simply ignores EFER.LMA if EFER.LME=0. Unfortunately, KVM doesn't ignore EFER.LMA in this case and consumes the illegal state when constructing the shadow MMU for L2. E.g. if userspace also clears CR4.PAE, then kvm_calc_cpu_role() will compute a role with 4 or 5 levels of paging, but shadow_mmu_init_context() will wire up the MMU to use the paging32 template, which maxes out its levels at 2. Note, the "real badness" is effectively the same as what happened with the nVMX bug fixed by commit 112e66017bff ("KVM: nVMX: add missing consistency checks for CR0 and CR4"). Unfortunately, the sanity check added by commit 72e2fb24a0b0 ("KVM: x86/mmu: Bug the VM if a vCPU ends up in long mode without PAE enabled") doesn't work for this case, since L2 state is active at the time of the page fault, but it's L1 that has the bad state.
-
CVE-2026-99346
In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Trigger new ASID allocation in both VMCBs on pCPU switch When the pCPU where the VMCB was most recently used is switched, reset the ASID generation in both VMCBs, triggering new ASID allocation for the immediate VMRUN as well as the next VMRUN on the other VMCB. The ASID is shared between vmcb01 and vmcb02, and gets flushed on every nested transition. However, since pCPU tracking is done per VMCB, it is possible for one VMCB to allocate a new ASID when migrated to a new pCPU, and then the other VMCB reuses that ASID on the old pCPU. This can result in the same ASID being used by multiple vCPUs on the old pCPU. Example scenario: - vCPU runs on pCPU A, vmcb01 is active, asid=1. - vCPU migrates to pCPU B, vmcb01 pCPU changes, new asid=2. - Another vCPU runs on pCPU A and allocates asid=2 as well. - vCPU migrates back to pCPU A, and then switches to vmcb02 before it runs again with vmcb01. - No pCPU switch is detected for vmcb02, so VMRUN is done with asid=2. - Two vCPUs end up using asid=2 on the same pCPU. Keep the VMCB dirtying to the active VMCB only. Clean bits are tracked by a pCPU for each VMCB, so do not unnecessarily dirty a VMCB if its pCPU does not change. Additionally, initialize the tracked pCPU for vmcb02 to -1 on nested enablement as hardening, so that a new ASID allocation is always triggered when nested is disabled and re-enabled. No performance regression was noticed when overcommitting L1 vCPUs in L0 (to force rescheduling), pinning L1 <-> L2 vCPUs, and running CPUID in a tight loop bouncing between 2 vCPUs in L2. An alternative (and perhaps more proper) fix would be tracking the ASID per-VMCB instead (e.g. [1]). However, that's a more involved change, and it would result in having different ASIDs for L1 and L2 without actually properly maintaining them. It would probably work because all TLB flushes target the current VMCB, and the other VMCB is always flushed on nested transitions, but the code ends up in an arguably more fragile state. Punt a proper clean fix to an incoming (and overdue) overhaul of SVM's ASID usage [2]. [1] https://lore.kernel.org/lkml/[email protected] [2] https://lore.kernel.org/kvm/[email protected]
-
CVE-2026-99333
In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Use report type from request node Use report type from request node while sending feature and input reports to HID core. The cli_data report type array is never assigned and feature reports are sent as input reports.
-
CVE-2026-99334
In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add preempt_disable() around virtual-mode HPTE bit-lock users kvmppc_hv_find_lock_hpte() requires virtual-mode callers to run with preemption disabled, because it can return with HPTE_V_HVLOCK still held until the caller later unlocks the HPTE. Existing virtual-mode callers in book3s_64_mmu_hv.c already follow that rule. Two virtual-mode call paths do not: 1. kvmppc_handle_exit_hv() calls kvmppc_hpte_hv_fault() for hash-mode data-side and instruction-side faults after guest exit, with preemption already enabled. kvmppc_hpte_hv_fault() calls kvmppc_hv_find_lock_hpte() directly. 2. kvmppc_pseries_do_hcall() executes virtual-mode handlers for HPT hcalls via kvmppc_pseries_do_hpt_hcall() with preemption enabled. The handlers for H_ENTER, H_REMOVE, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, and H_BULK_REMOVE spin on try_lock_hpte() or lock_rmap(), and H_ENTER also reaches kvmppc_do_h_enter(), which uses arch_spin_lock() on kvm->mmu_lock. That raw lock choice is intentional because kvmppc_do_h_enter() is also used by real-mode callers, so the correct fix is to establish the proper preemption context at the virtual-mode caller boundary. If a vCPU thread is preempted while holding HPTE_V_HVLOCK, any other thread on the same CPU trying to acquire the same bit-lock can spin indefinitely. The same applies to lock_rmap() users and to the H_ENTER path while holding the raw mmu_lock. Fix this by adding preempt_disable()/preempt_enable() pairs around the two kvmppc_hpte_hv_fault() call sites in kvmppc_handle_exit_hv(), and around the kvmppc_pseries_do_hpt_hcall() invocation in kvmppc_pseries_do_hcall(). Targeting only the HPT hcall helper avoids wrapping non-HPT hcalls (such as H_RTAS, H_CONFER, H_REGISTER_VPA) that perform page faults, blocking memory allocations, or context switches.
-
CVE-2026-99335
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Establish memslot<=>guest_memfd bindings *after* memslot is ready Wait to bind a memslot to a guest_memfd instance until *after* the memslot is fully prepared, as creating the binding in guest_memfd will effectively expose the memslot to readers. As pointed out by Sashiko, binding the memslot before it's ready to be exposed to the rest of the world can break various memslot assumption and rules. E.g. x86 could observe a NULL rmap pointer if a PUNCH_HOLE hit the guest_memfd after the binding was created, but before KVM made it through kvm_prepare_memory_region().
-
CVE-2026-99336
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: take the invalidate lock when unbinding a dying file kvm_gmem_unbind() takes mapping->invalidate_lock only if the get_file_active() succeeds. When the guest_memfd file is dying, its reference count is already zero so get_file_active fails and the binding is removed without holding the invalidate lock. kvm_gmem_invalidate_{start,end}() checks f->bindings independently to decide whether to begin or end KVM MMU invalidation. So, the bindings must therefore remain stable between the two calls. Otherwise, unbind can remove a binding after start increments mmu_invalidate_in_progress, but before end finds the binding and decrements it. Example, unbind race with memory failure: CPU 0: memory failure CPU 1: memslot delete ---------------------------------- --------------------------- (guest_memfd file is dying) kvm_gmem_error_folio() kvm_gmem_invalidate_start() finds binding mmu_invalidate_in_progress++ kvm_gmem_unbind() get_file_active() fails removes binding kvm_gmem_invalidate_end() no binding found counter stays elevated mmu_invalidate_retry() then returns 1 forever, so guest page faults retry without ever installing a mapping and the guest hangs. Remove the distinction between live and dying files in the unbind path. Always use slot->gmem.file and take the invalidate lock when it's non-NULL. Normal unbind callers hold slots_lock, which prevents release from clearing the pointer or freeing the file state until unbind completes. Final VM teardown can only see a NULL pointer because guest_memfd pins the KVM until release has cleared all bindings.
-
CVE-2026-99337
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Bus Lock VM exit Enable Bus Lock VM exit functionality for TDX guests. Bus Lock VM exit is an existing feature supported by KVM. Userspace can enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Bus Lock VM exit for TDX guests by programming the BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler. Note, there is no enumeration bit for this feature by TDX module because all TDX modules support it and allow to set the TD VMCS as long as the hardware supports the feature.
-
CVE-2026-99338
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Notify VM exit Enable Notify VM exit functionality for TDX guests. Notify VM exit is an existing feature supported by KVM. Userspace can enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Notify VM exit for TDX guests by: - Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS bits are set. Since TDX vCPU cannot be reset, it only needs to be configured once when initializing the TDX vCPU. - Adding corresponding exit handler for TDX Notify VM Exit. Notify VM exit can happen when executing the IRET instruction. If the IRET unblocks the NMI blocking state, bit 12 of the exit qualification is set. In this case, the VMM needs to restore the "blocked by NMI" state when it decides to re-enter the guest. For TDX, KVM cannot manage the GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to handle it. Extract the common part without NMI blocking handling into a helper in common.h so that it can be shared between VMX and TDX. Note, KVM uses "pre-production" terminology for the feature formally called Notify VM-Exit. All public versions of the SDM refer to the feature as Instruction Timeout. This will be remedied in the near future, for now, use KVM's terminology for consistency. Note, #2, there is no enumeration bit for Notify VM exit by TDX module because all TDX modules support it, and allow to set the corresponding TD VMCS fields as long as the hardware supports the feature.
-
CVE-2026-99339
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Zero reserved synic flags when delivering message to avoid stack leak Ensure all reserved flags are zeroed when setting the msg_pending flag as part of SynIC message delivery, as setting only msg_pending can leak seven bits of kernel stack data to the guest. E.g. gcc typically uses a bitwise-OR to set the msg_pending flag, without initializing the on-stack variable. Precisely zero the flags, e.g. as opposed to zeroing the entire structure, to make it somewhat more obvious that the flags *need* to be zeroed. E.g. it would be quite easy to misread the initial read of guest memory and think that zeroing the entire structure is completely superfluous.
-
CVE-2026-99325
In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Add suspend function and gate access under bool. Currently a device can suspend while delayed work is pending or executing. Cancel delayed work if it was pending and restart it if it hasn't run yet. Gate access to show/store functions behind a bool to prevent access prior to cfg_setup() being completed.
-
CVE-2026-99326
In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Prevent deadlock if device removed during setup hid_gos_cfg_remove() calls a mutex before canceling delayed work. That delayed work function calls mcu_property_out(), which holds the same mutex. Prevent deadlock my removing the mutex prior to stopping the work. Additionally, since cancel_delayed_work has the potential to re-arm, switch to disable_delayed_work.
-
CVE-2026-99328
In the Linux kernel, the following vulnerability has been resolved: HID: picoLCD: check for fb_deferred_io_init() error fb_deferred_io_init() allocates deferred I/O state, populating info->fbdefio_state, or leaving it NULL if an error occurs. Currently picolcd_init_framebuffer() ignores its return value. Therefore if an error arises in fb_deferred_io_init() (for instance, due to an allocation failure) info->fbdefio_state is left NULL. When the file is subsequently opened, fb_open() will dereference a NULL pointer (calling fb_deferred_io_open()). Fix this by checking for the error. Also correct cleanup ordering - defio is initialised after the sysfs file, so cleanup defio first.
-
CVE-2026-99329
In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: always initialize and cancel init_work The writable gpio_mode_enforce parameter can change between probe and remove. If it changes from false to true after probe, remove skips cancellation of init_work. Pending or running work can then access devm-managed driver state after teardown. Changing it from true to false can make remove cancel an uninitialized delayed work item. Initialize init_work whenever IIO is reachable and cancel it unconditionally on remove. Keep the parameter check only for scheduling the initialization. The false-to-true cancellation gap was previously reported by Sashiko. We also encountered this issue during our static-analysis research.
-
CVE-2026-99331
In the Linux kernel, the following vulnerability has been resolved: HID: cp2112: validate response report lengths The HID core invokes raw_event callbacks before validating the report length. cp2112_raw_event() reads every field of a transfer status response without checking size. For a data response, it reads the length at offset two and copies that many bytes from offset three, again without ensuring that the input report contains them. Require a complete transfer status structure. For data responses, first require the header and then ensure the clamped payload length fits in the received report before copying it. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus.
-
CVE-2026-99321
In the Linux kernel, the following vulnerability has been resolved: rust_binder: wake epoll on self-work queued to poll thread When a thread pushes work to its own todo list, InnerThread::push_work() returns PushWorkRes::OkNotifyPoll if the thread uses epoll, but four call sites in thread.rs discard this return value. As a result, a non-blocking BC_* write that enqueues work onto the calling thread's todo list without also reading will not wake epoll. Check the return value and call self.process.notify_poll(false) when PushWorkRes::OkNotifyPoll is returned. This is similar to commit 97830f3c3088 ("binder: signal epoll threads of self-work"), but in C Binder pending thread work also prevented subsequent process work from waking epoll, causing a permanent hang, which is not the case in Rust Binder. This means that in practice, it merely delays notifications rather than completely failing to send them.
-
CVE-2026-99322
In the Linux kernel, the following vulnerability has been resolved: ksmbd: rebind completed CREATE replays without draining the old channel A completed DurableHandleReqV2 CREATE can be replayed through another channel while its original channel is exiting. The existing replay path returns the open but leaves its connection and oplock references pointing at the old channel. Its open count also stays on that channel, and a later CLOSE through the surviving channel decrements the wrong counter. After checking the owner, lease key and persistent flag, verify that an active open is still published in the requesting session's file table. Do this even when no oplock was granted, and before processing a consumed replay. Do not read a borrowed opinfo session pointer for this check. Keep a healthy original binding. If the original channel is exiting or releasing, move the open and its own oplock references to the requesting channel. Serialize this with CLOSE using the session file-table lock, and with detach, reconnect and notification snapshots using m_lock. The earlier lock index and lease-table changes make their lifetimes independent of this connection change. No old-channel r_count wait is needed, including when an unrelated request remains active there. Account final close against fp->conn in one place, balance durable detach and reconnect, and transfer the count with a replay binding change. A final global lookup put may run after CLOSE has removed the volatile id; unlink the open from the inode list on that final close as well. A live completed CREATE replay may follow a break that lowered the durable open's batch oplock. Apply the batch eligibility check only to detached reconnects, while retaining the owner, lease key and persistent flag checks for active replays.
-
CVE-2026-133192
In JetBrains Junie GitHub Action before 1.10.0 untrusted fork code could be processed in privileged workflow runs
-
CVE-2026-133196
In JetBrains Junie CLI before 26.11.1 files outside the project could be overwritten via shell output redirection
-
CVE-2026-133184
MISP contains an authorization and input-validation flaw in its event push mechanism. When a user with push permissions initiates a push of events to a remote MISP instance, the system fails to enforce two critical checks: (1) it does not verify that an event is published before including it in the push, allowing unpublished (i.e., not yet publicly shared) events to be transmitted to the remote server; and (2) it does not verify that the pushing user has read access to the event, causing events the user cannot fetch to be sent as empty event shells, thereby disclosing the existence and metadata of events the user is not authorized to view. Additionally, the remote server's reply selecting which offered events to accept is used without validating that the selected identifiers actually correspond to events in the offered set, potentially allowing the remote to reference events outside the intended scope. The vulnerability requires an authenticated user with push permissions on the source MISP instance and a configured push target. The security impact is unauthorized disclosure of confidential threat-intelligence data (unpublished events and events restricted by user permissions) to a remote MISP instance that should not receive them.
-
CVE-2026-133178
flowintel allows users with editor-level access to author case and task fields, including aggregated tags. When these records are exported as CSV, the field values are written verbatim into the output file. Because no sanitisation is applied to user-supplied text before CSV serialisation, an attacker can store values that begin with spreadsheet formula triggers (such as =, +, -, @, or their fullwidth Unicode equivalents, or leading control/whitespace characters). When a victim opens the exported CSV in a spreadsheet application (e.g. Microsoft Excel, LibreOffice Calc), the stored text is interpreted and executed as a live formula rather than displayed as literal text. This can lead to unintended data manipulation within the spreadsheet, potential data exfiltration via formula functions, or execution of downstream commands depending on the spreadsheet application and its configuration. The vulnerability requires the victim to actively open the CSV file in a spreadsheet application; the flowintel application itself is not directly compromised. Affected: <4.1.0
-
CVE-2026-129289
PHP-FPM request smuggling through an unread HTTP request body. PHP does not discard the unread part of an HTTP request body at request shutdown when the application has opened php://input without reading it to the end. When the front end reuses backend connections, which is not the default in nginx or Apache (for example nginx with fastcgi_keep_conn on, or Apache mod_proxy_fcgi with enablereuse=on), PHP-FPM can parse the leftover bytes as a new FastCGI request. An unauthenticated remote attacker can use a single crafted multipart/form-data request to forge a backend request with chosen parameters such as SCRIPT_FILENAME, REMOTE_ADDR and PHP_ADMIN_VALUE, which can lead to execution of attacker-controlled PHP code. With LSAPI, subsequent requests on the connection can be disrupted. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.
-
CVE-2026-133099
In JetBrains TeamCity before 2026.2.2 vCS root passwords could be extracted via the REST API property locator
-
CVE-2026-133102
In JetBrains TeamCity before 2026.2.2, 2026.1.6 out-of-band data exfiltration via DNS resolution was possible in the Kotlin DSL sandbox
-
CVE-2026-133057
In JetBrains TeamCity before 2026.2.1, 2026.1.5 the TFS helper server was exposed on all network interfaces
-
CVE-2026-22311
The failed-login limiter of the JTL-Wawi synchronisation interface of JTL-Shop derives the client identity from the client-controlled X-Forwarded-For header and counts requests without credentials as failed logins. An unauthenticated remote attacker can block the synchronisation between JTL-Shop and JTL-Wawi with a few requests and repeat this indefinitely, so that orders are no longer handed over to JTL-Wawi. No data is disclosed and no code is executed.
-
CVE-2026-133020
In JetBrains TeamCity before 2026.1.5 untrusted build approval for GitHub fork pull requests could be bypassed
-
CVE-2026-132128
@fastify/middie is the middleware engine that adds Express and Connect style middleware support to Fastify. In versions up to and including 9.3.6, middie does not honor the router's caseSensitive setting and matches path-scoped middleware mount paths with a case-insensitive regular expression that does not fold non-ASCII characters, while Fastify's router, when caseSensitive is set to false, lowercases the request path with a Unicode-aware conversion that maps the KELVIN SIGN character (U+212A) to the ASCII letter k. A request that spells a k in a protected mount path as the percent-encoded KELVIN SIGN is therefore routed to the protected handler while the middleware mounted on that path, such as authentication, authorization, or rate limiting, never matches and is skipped, letting an unauthenticated client reach the handler. Only applications that set caseSensitive to false and protect a mount path containing the letter k are affected. The issue is fixed in @fastify/middie 9.3.7, and users should upgrade to 9.3.7 or later. As a workaround, enforce authorization in a Fastify hook such as preHandler that runs after routing, or keep routing case-sensitive, which is the default.
-
CVE-2026-132131
@fastify/middie is the middleware engine that adds Express and Connect style middleware support to Fastify. In versions 8.3.0 through 9.3.6, the internal helper that normalizes a path-scoped middleware's mount path only handles string inputs, but the use method also accepts an array of mount paths and passes it through unchanged, so the normalization silently does nothing. As a result, a trailing slash on an array element survives into the generated route-matching regular expression, and an element that is exactly the root path, meaning a catch-all mount, is dropped entirely. Requests to subroutes of the affected mount paths then skip the path-scoped middleware, such as authentication, authorization, or rate limiting, while Fastify's router still dispatches them to the handler, allowing an unauthenticated client to reach protected routes. Applications are affected when they mount middleware on an array of paths in which an element ends with a slash, including one introduced by a plugin prefix that ends with a slash, or is exactly the root path. The issue is fixed in @fastify/middie 9.3.7, and users should upgrade to 9.3.7 or later. As a workaround, enforce authorization in a Fastify hook such as preHandler that runs after routing, and avoid array mount paths with a trailing slash element for security relevant middleware.
-
CVE-2026-132133
@fastify/middie is the middleware engine that adds Express and Connect style middleware support to Fastify. In versions up to and including 9.3.6, middie builds the match regular expression for each path-scoped middleware from its mount path without collapsing duplicate slashes, even when the application enables the ignoreDuplicateSlashes router option. Under that option Fastify's router collapses duplicate slashes in both the registered route and the request path, so a mount path containing a doubled slash is served by the router at its single-slash form while the middleware's compiled match still requires the doubled slash and never matches. A path-scoped middleware such as authentication, authorization, or rate limiting is therefore skipped while the router dispatches the request to the protected handler, without any authentication required. Applications are affected when they enable ignoreDuplicateSlashes and a middleware mount path reaches middie with a duplicate slash, most commonly when a plugin prefix that ends with a slash is joined to a mount path that starts with one. The issue is fixed in @fastify/middie 9.3.7, and users should upgrade to 9.3.7 or later. As a workaround, enforce authorization in a Fastify hook such as preHandler that runs after routing, and avoid mount paths and plugin prefixes that introduce duplicate slashes.
-
CVE-2026-82950
The device only supports Wi-Fi protocols vulnerable to deauthentication attacks (WEP/WPA/WPA2). Should any event which would typically be logged to the user’s mobile device (such as arming or disarming the alarm or any tamper events) be incurred whilst the device is temporarily disconnected from its Wi-Fi network (such as via a deauthentication attack), those alerts will not be sent even after connection is regained.
-
CVE-2026-133001
FlowIntel contains an authorization flaw in its duplicate alert ingestion logic. When a duplicate alert is received and its content is updated, the ownership and visibility scope fields (owner user and owner organization) were not refreshed to reflect the connector's current scope. As a result, an alert that was originally created under a broader visibility scope retained that broader scope even after the connector's scope was narrowed or changed. This means that users or organizations that should no longer have visibility into a given alert could continue to access it, because the stale ownership fields were never updated during the duplicate-update path. The issue affected all duplicate updates, including those involving alerts in terminal review states and those recovered from uniqueness conflicts. Security impact: - Unauthorized disclosure of security alert content to users or organizations outside the intended visibility scope. - Stale access persists indefinitely until the alert is independently re-scoped or deleted. Affected version: <4.1.0.
-
CVE-2026-132937
In JetBrains TeamCity before 2026.2, 2026.1.4 arbitrary file write via read-write file channels in the Kotlin DSL sandbox was possible
-
CVE-2026-132926
In JetBrains TeamCity before 2026.2 poisoning of OAuth discovery metadata via the X-Forwarded-Host header was possible
-
CVE-2026-132916
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 arbitrary file deletion on the server was possible via the Kotlin DSL sandbox
-
CVE-2026-59599
Android on supported Pixel devices before security patch level 2026-11-05 allows elevation of privilege in the hypervisor subcomponent in the kernel, aka A-519434175.
-
CVE-2026-73860
CRIU is a checkpoint and restore tool for Linux. Prior to 4.2.1, CRIU injects a syscall;int3 sequence at the start of the first executable virtual memory area and resumes the target process to execute parasite code. Malicious code in the target process can keep an rseq critical section armed over that injection point so the kernel's restartable-sequence abort redirects execution to an attacker-controlled callback when CRIU resumes the process. In container snapshot environments, the hijacked parasite runs with seccomp disabled and a relaxed AppArmor profile and supplies trusted data to the privileged CRIU process, which can enable higher-privilege code execution. This issue is fixed in version 4.2.1.
A list of CVEs whose flaw type is other, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.