Other CVEs.
Published CVEs classified as other, ranked by exploit odds.
-
CVE-2026-124914
Site isolation issue in the DOM: Navigation component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7.
-
CVE-2026-123842
In JetBrains IntelliJ IDEA before 2026.3 arbitrary file write was possible via symlinks when extracting plugin archives
-
CVE-2026-104657
Missing integrity verification in the Progress Software Fiddler Download and Setup Skill on Linux, macOS, and Windows which allows an attacker to compromise or influence a release component and execute attacker-controlled code when a user runs the skill. On macOS, the skill stages the package at a predictable path and installs it with administrator privileges, which may allow code execution with root privileges after user approval. A local process may also replace the staged macOS package while the skill waits for approval.
-
CVE-2026-121746
Node Version Manager (nvm) is a POSIX-compliant shell function for managing multiple node.js versions. In versions 0.40.0 through 0.40.8, `nvm use --save` and `nvm install --save` (or `-w`) write the resolved version to `$PWD/.nvmrc` with `tee`, which follows a symbolic link. A repository that commits `.nvmrc` as a symlink to a path outside itself (git recreates the link on clone) therefore makes `--save` truncate any file the user can write, such as a shell startup file or `~/.ssh/authorized_keys`, and replace its contents with the version string, or create the target of a dangling link; the link itself is left unchanged, so `git status` stays clean. The attacker does not control the content written, so this is data loss, not code execution. Version 0.41.0 refuses, with a warning, to write when `.nvmrc` in the current directory is a symlink, dangling or not, rather than writing through it or replacing it.
-
CVE-2026-112568
A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. Processing a maliciously crafted file may bypass Gatekeeper checks.
-
CVE-2026-98899
In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: mark the rcu locked areas properly When we bump the uref counter, there's no need to keep the rcu lock because the referred hash table can't disappear. Also, from the same reason in mtype_gc we need the rcu lock and not a spinlock.
-
CVE-2026-98889
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix sched scan IE sizing Scheduled scan built the probe request before iwl_mvm_scan_fits(), so oversized IEs could be copied into the fixed preq buffer before length validation. Move iwl_mvm_build_scan_probe() after the fits check. Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len() so userspace limits account for driver-inserted DS/TPC bytes.
-
CVE-2024-4989
The callback URL parameter in WSO2 API Manager fails to validate user-supplied input, allowing it to be controlled by malicious actors. Exploitation of this vulnerability could lead to users being redirected to attacker-controlled web pages. This can be used in conjunction with social engineering techniques to trick users into interacting with malicious links, potentially resulting in phishing attacks aimed at acquiring sensitive information or causing other harm.
-
CVE-2026-113205
Insufficient verification of data authenticity in Variations in Google Chrome prior to 156.0.8078.47 allowed an adjacent attacker to bypass system access restrictions via crafted network traffic. (Chromium security severity: Medium)
-
CVE-2026-117490
The Flatsome WordPress theme before 3.20.13 does not enforce the acting user's publish and post-type restrictions on an AJAX save action, allowing users with a role as low as Contributor to publish their own content and change its post type (for example to a product) without holding the required capabilities.
-
CVE-2026-97192
The Secure Custom Fields WordPress plugin before 6.9.8 does not re-apply its field-group location rules when persisting values submitted through the post editor save path, allowing users with contributor-level access and above to write custom fields the site restricted to administrators onto their own posts.
-
CVE-2026-97190
The Advanced Custom Fields (ACF®) WordPress plugin before 6.8.11 does not verify that a user is allowed to edit the target object before writing to it during bidirectional relationship synchronization, allowing users with contributor-level access and above to add or remove a reference to their own object on arbitrary posts, users, or terms they cannot otherwise edit.
-
CVE-2026-97191
The Advanced Custom Fields (ACF®) WordPress plugin before 6.8.11 does not re-apply its field-group location rules when persisting values submitted through the post editor save path, allowing users with contributor-level access and above to write custom fields the site restricted to administrators onto their own posts.
-
CVE-2026-99158
In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix false warning in ring_buffer_map_get_reader() The mmap reader can warn when it catches up with a writer that is still committing events. rb_get_reader_page() returns NULL in this case, but ring_buffer_map_get_reader() treats that result as an error. The initial rb_per_cpu_empty() check filters out an empty buffer, but it does not guarantee that the next reader page has committed data. Writers do not take reader_lock and can advance commit_page before publishing the committed length on the new page. rb_get_reader_page() can swap to that page, catch up with the writer and return NULL. Handle NULL through the existing no-data exit without warning. Remove the caller's reader_page == commit_page check as well, since the reader-page helper already handles that case. The existing metadata update and return path remain in place.
-
CVE-2026-99160
In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not show buffer_meta for CPUs without a buffer The per_cpu/cpuN/buffer_meta files are created for every possible CPU, but buffer->buffers[cpu] is only allocated once that CPU comes online. Reading the file of a CPU that never came online dereferences a NULL cpu_buffer in rbm_start(). Fail the open with -ENODEV when the CPU has no buffer, as the other per CPU ring buffer interfaces do.
-
CVE-2026-99146
In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Add sanity check for DMC load address For DMC firmware header version 3, the firmware load address is stored in dmc_info->start_mmioaddr and later used by dmc_load_program(). Unlike the MMIO address table, the firmware load address is not validated. Add a sanity check to ensure it is within the valid range. BSpec: 69671, 68378 (cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c)
-
CVE-2026-99134
In the Linux kernel, the following vulnerability has been resolved: mac802154: fix data race and NULL deref on local->assoc_dev local->assoc_dev is shared between the association path and the association-response worker without common synchronization. mac802154_perform_association() stores the coordinator pointer and waits for a response. Its timeout and error paths clear the pointer and return to mac802154_associate(), which may then free the coordinator object. Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit and enter mac802154_process_association_resp(), which dereferences assoc_dev. The worker's bit test and the handler's pointer dereference are not atomic with respect to cleanup. Cleanup can clear assoc_dev between them, causing a NULL dereference, or free the coordinator while the response handler still uses the pointer. The recorded result is exposed to the same window. assoc_status and assoc_addr are written by the handler but read by the association path while the associating bit is still set, so a second response for the same request - a malicious one, for instance - can replace them between those reads and leave the caller with an incoherent status and address pair. The response handler only needs the coordinator extended address. Replace assoc_dev with a cached address, removing the pointer lifetime dependency. Protect the cached address and the associating bit with a dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee an atomic __le64 access on all 32-bit architectures. wpan_dev->association_lock cannot be reused here: nl802154_associate() holds it across rdev_associate(), hence for the whole of mac802154_perform_association() including the wait for the response. A response handler taking that lock would only get it once the association has already given up. Reset the completion, publish the cached address, and set the associating bit while holding the lock. The response handler takes the lock, rechecks the bit and the cached address, records the response, clears the bit, and only then completes the waiter. Thus cleanup cannot pass the handler between its state check and completion, and the cached 64-bit value cannot tear. The handler clears the bit before completing, not the woken waiter: otherwise complete() is issued under the lock and a second (e.g. malicious) response can reacquire it before the waiter and replace the result. So a wait that returns success implies the bit is already clear, and the success and negative-response paths return directly. The transmit-error and timeout paths still clear it under assoc_lock, which serializes any racing response against the cleanup while the call returns the error it already selected. Both paths snapshot assoc_status and assoc_addr under the same lock. Both users run in process context, so a plain spinlock is sufficient. The lock is not held while waiting for the completion.
-
CVE-2026-99105
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to ops.enqueue() instead of being kept running. Exiting tasks without SCX_OPS_ENQ_EXITING, migration disabled tasks without SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue() and go straight to the local DSQ. This happens in put_prev_task_scx() after the pick has settled on idle, so nothing reschedules the CPU, which idles with the task queued until an unrelated wakeup lands on it or the watchdog fires. scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for over 40 seconds. A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST enqueue left the task on this CPU's local DSQ, set need_resched on the task being switched in, as proxy_resched_idle() does. resched_curr() would flag the task being put instead, and __schedule() clears that right after the pick.
-
CVE-2026-112672
The issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A maliciously crafted ZIP archive may bypass Gatekeeper checks.
-
CVE-2026-99095
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: drain the hangcheck timer and works on V3D unbind Nothing stops the hangcheck timer that submitted jobs arm, or the job_done_work that the render-done interrupt queues, at teardown: vc4_irq_disable() cancels only overflow_mem_work, and vc4_gem_destroy() runs from the drm-managed release, after vc4_v3d_unbind() has already uninstalled the V3D interrupt and cleared vc4->v3d. A timer still armed by then reads V3D registers through the NULL vc4->v3d pointer, and the late callbacks run on the vc4_dev embedding them after it has been freed. Drain them in vc4_v3d_unbind(): shut the timer down and cancel reset_work before the interrupt is taken down, because its vc4_irq_reset() re-enables it, then flush job_done_work so that completions queued at teardown still release their jobs. This issue was found by an in-house static analysis tool.
-
CVE-2026-99091
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.
-
CVE-2026-99062
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: account only unread bytes in read_skb() After a partial stream receive, rx_bytes tracks the unread suffix while buf_used and peer credit still cover the whole packet. virtio_transport_read_skb() dequeues that packet but passes pkt_len for both counters, underflowing rx_bytes. On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read from a 100-byte packet made SIOCINQ report -40, an empty recv return ELOOP, and poll report the empty socket readable. After verdict detach, receiving 40 bytes wrapped the counter to zero and hid those queued bytes until one more byte arrived. The fixed run kept the counter balanced and exposed all queued data immediately. This was found during an LLM-assisted manual source audit of VSOCK receive accounting while re-evaluating virtio_transport_read_skb() after CVE-2024-50169. Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the full packet length for buf_used and peer credit.
-
CVE-2026-99069
In the Linux kernel, the following vulnerability has been resolved: Input: ati_remote2 - fix type confusion in device attribute handlers Previously, the channel_mask and mode_mask attributes were registered on the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b ("Input: ati-remote2 - use driver core to instantiate device attributes") converted the driver to let the driver core manage them via dev_groups in struct usb_driver, the attributes moved to the bound usb_interface devices, but the show and store callbacks were not updated accordingly. As a result, the callbacks still invoked to_usb_device() on a device pointer belonging to a struct usb_interface, producing an invalid usb_device pointer. Use to_usb_interface() directly in the attribute handlers to obtain the interface and its driver data.
-
CVE-2026-99055
In the Linux kernel, the following vulnerability has been resolved: tcp: reject net_iov in zerocopy receive mapping hints After copying a readable prefix, receive_fallback_to_copy() asks tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the next skb is unreadable, find_next_mappable_frag() passes its net_iov fragment to can_map_frag(). skb_frag_page() returns NULL for a net_iov, but can_map_frag() dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF fragment reported: BUG: KASAN: null-ptr-deref in can_map_frag tcp_zerocopy_receive -> can_map_frag Kernel panic - not syncing: KASAN: panic_on_warn set The diagnostic inserted the net_iov directly because the test host has no devmem-capable NIC. Hardware end-to-end reachability remains untested and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue. Reject all net_iov fragments before skb_frag_page(). This covers both DMABUF and IOURING net_iov types while leaving page-backed checks unchanged. With the guard, the same queue copied the readable prefix, returned a 4096-byte skip hint, and completed without a fault.
-
CVE-2026-99060
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7603: initialize global station WCID mt7603 uses a driver-private global station WCID for frames that have neither a station nor a vif, including frames injected through a monitor interface. Unlike the core global WCID initialized by mt76_register_device(), this WCID is published without ever being passed to mt76_wcid_init(). Since commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status"), mt76_tx() queues every such frame on the WCID's tx_pending or tx_offchannel queue and links its tx_list. The first injected frame therefore reaches __skb_queue_tail() with an uninitialized sk_buff_head and dereferences a NULL prev pointer. Initialize the WCID before publishing it. The fix was tested on an MT7603 PCIe device. Three wildcard probe requests were injected through a monitor interface. The hardware queue head and tail advanced from 0 to 3 and a second radio captured the third request over the air. No oops or reset occurred. After restoring AP mode, a 150 MB transfer also completed without a reset.
-
CVE-2026-99028
In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop In the dmaengine path the driver pre-submits RX buffers and holds in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync() aborts these descriptors without running their callbacks, and the driver then frees only the ring shells, leaking every SKB still owned by the engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted per channel, the mapping leak can eventually exhaust a limited IOMMU aperture. Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a slot that still owns a live, DMA-mapped buffer, and on stop unmap and free every such buffer. axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on each completion, so it can race axienet_stop(): a completion may submit a fresh buffer after dmaengine_terminate_sync() has returned, leaving the channel armed with a buffer the teardown then frees while the engine may still write into it (dma_release_channel() does not stop it either). Add a lock that axienet_dma_rx_cb() holds across the @stopping check and the resubmit, and axienet_stop() holds to set @stopping before terminating. Once @stopping is set no callback can arm a new buffer, and any armed just before is aborted by the terminate, so teardown only frees buffers the engine no longer owns.
-
CVE-2026-99020
In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4 The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two entries, covering selectors 0x00-0x45. The linear range helpers loop over n_linear_ranges entries, so any lookup of a selector above 0x45 reads past the end of the array and treats whatever follows it as two more ranges. This happens on the normal registration path when the core checks the voltage constraints against every selector. TPS652G1 uses the same descriptors and is affected too. Use ARRAY_SIZE() so the count always matches the table.
-
CVE-2026-99003
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate userspace queue count against initialized firmware slot count In panthor_drv.c:panthor_ioctl_group_create(), the queue count is validated against the hardcoded maximum: if (!args->queues.count || args->queues.count > MAX_CS_PER_CSG) return -EINVAL; However, if the firmware reports fewer slots than MAX_CS_PER_CSG, panthor_fw_init_ifaces() will only initialize that smaller number of stream interfaces. If unprivileged userspace requests more queues than the firmware reported (but no more than MAX_CS_PER_CSG), cs_slot_prog_locked() fetches an uninitialized stream interface and may crash when dereferencing cs_iface->input->ringbuf_base.
-
CVE-2026-99004
In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Size page table preallocation by device address Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for map() interface") passed the device address to pvr_mmu_op_context_create(), but the preallocation is still sized from device_addr + sgt_offset with an exclusive end. The offset into the object's pages has no place in a device-virtual range, and the exclusive end allocates one table too many when the range ends on a table boundary. Count the tables from device_addr and the inclusive end of the range. The new calculation does not take page table indices into account. This fixes another issue with the previous implementation, where the difference between start and end indices could underflow when a mapping crossed a page table boundary. This would lead to the driver preallocating a huge number of MMU pages, exhausting system memory and triggering an out of memory panic. [Alessio: add paragraph to point out OOM bug being fixed, cc stable]
-
CVE-2026-98996
In the Linux kernel, the following vulnerability has been resolved: fs: don't silently unmount busy mounts The propagate_mount_busy() helper exists to decide whether a synchronous can suceed. It does that by looking at the copies of the victims in the mounts its parent propagates to. One of those functions from propagation hell. It skips a copy that has child mounts except for the case of a single child mount covering the copy's root. That algorithm used to be exact. It isn't anymore. Originally only childless copies were unmounted during propagation. And 1064f874abc0 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.") ended up adding covered mounts to both sides in one go. Along came 99b19d16471e ("mnt: In propgate_umount handle visiting mounts in any order") and that started to unmount more than before: [1]: A copy of a mount is unmounted when each of its children is either its overmount or a copy of the victim itself. In the former case the overmount gets reparented. In the latter case the copy of the victim will end up being unmounted. So propagate_umount() ended up being rewritten without adjusting propagate_mount_busy(). And currently propagate_mount_busy() doesn't look at copies of the victim that have two or more children nor a single child that is not the overmount. So any such copy in [1] is not checked for references. The result is that a synchronous unmount succeeds, pulling out a mount that is still in use. A container can run into this with its own mounts. The host shares a tree with the container and the host has a mount in that tree: mount -t tmpfs none /mnt mount --make-shared /mnt mount -t tmpfs none /mnt/a The container's /mnt is a slave copy of the host mount. The container now takes a detached copy of the tree and mounts that copy beneath its propagated copy of /mnt/a and keeps the file descriptor to the tree open: unshare -m --propagation unchanged mount --make-rslave / fd = open_tree(AT_FDCWD, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE) move_mount(fd, "", AT_FDCWD, "/mnt/a", MOVE_MOUNT_BENEATH) grep /mnt /proc/self/mountinfo 775 355 ... /mnt ... master:646 777 775 ... /mnt/a ... master:646 776 777 ... /mnt/a ... master:647 778 777 ... /mnt/a/a ... master:647 The now attached tree (777) is now mounted beneath the container's copy of /mnt/a. That's also where the host mount sits (as seen from the host mount namespace). So the propagated copy (776) of the host's mount is on top of its root and the copy of that (778) is inside it. Now the host runs: umount /mnt/a and it succeeds. The moved tree tree and the copy inside of it are gone from the container. Now only the propagated copy is left and it got reparented to where it was before: grep /mnt /proc/self/mountinfo 775 355 ... /mnt ... master:646 776 775 ... /mnt/a ... But the file descriptor still refers to the moved tree. So a synchronous umount detached a mount that is still in use. Teach propagate_mount_busy() the same checks that propagate_umount() does. It now checks for a single victim mount without children for which it can assume that MNT_LOCKED is cleared on every copy like propagate_umount() does. The copies form chains. IOW, when a copy itself receives propagation from the victim's parent then the mount at the same mountpoint inside that copy is a copy as well. Whether a mount receives propagation from the victim's can simply be checked by walking its masters. Walk each chain once from its top so we are sure that nested copies stay linear. Check every reference once of every copy that gets unmounted.
-
CVE-2026-98989
In the Linux kernel, the following vulnerability has been resolved: namespace: check a recursive bind mount for mount namespace loops do_loopback() refuses to bind mount the file of a mount namespace that is as old as the caller's or older because a mount namespace that holds a mount of its own file, or of an ancestor's, would cause a cycle. But it only checks the dentry the bind mount starts from. With MS_REC everything below it is copied and do_loopback() passes CL_COPY_MNT_NS_FILE so mount namespace files below the source are copied. That's fine for a source in the caller's own mount namespace. Every mount namespace file in there passed the same check when it was bind-mounted. It isn't fine for a source in another mount namespace. may_copy_tree() accepts a bind mount of any nsfs or pidfs file no matter what mount namespace it lives in so that /proc/<pid>/ns/<ns> and pidfds can be bind mounted. If we create a bind-mount stack of mount namespaces file descriptors the kernel will copy them irrespective of their ancestoral relationship to the mount namespace in question: 151 146 0:7 net:[4026531833] /tmp/nrc/y rw - nsfs nsfs rw 152 151 0:7 mnt:[4026532293] /tmp/nrc/y rw - nsfs nsfs rw Mount 152 is a mount of the mount namespace file of mount namespace 4026532293 inside mount namespace 4026532293. That namespace and every mount in it are leaked... All it takes is a process in an older mount namespace that stacks the file and repeating it leaks without limit: after control: Shmem: 380 kB child: mount(/proc/self/fd/6, MS_BIND|MS_REC): ok after cycle: Shmem: 65916 kB do_move_mount() runs check_for_nsfs_mounts() over a detached tree for exactly that reason. Do the same for the copy before it is grafted.
-
CVE-2026-98949
In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix reference and vm_bo handling in remap() When a map overlaps part of an existing mapping, pvr_vm_gpuva_remap() splits the mapping into prev/next parts covering what the request did not take, instead of creating something new. It gets two things wrong. - A GEM reference is taken for each part but it's never needed and never dropped, so it leaks one reference per split (remap-next-in-2m in tests/imagination/pvr_vm_map.c): CRITICAL: 33558528 bytes of shmem still held after close - The parts still belong to the original object being split, but pvr_vm_gpuva_remap() links them to ctx->gpuvm_bo, the new object's vm_bo: prev_va --obj--> BO_A BO_B <--obj-- vm_bo (ctx->gpuvm_bo) \___________link___________/ (mismatch: BO_A != BO_B) drm_gpuva_link() catches the mismatch: WARNING: drivers/gpu/drm/drm_gpuvm.c:2108 at drm_gpuva_link+0x2ec/0x310 drm_WARN_ON(obj != vm_bo->obj) Call trace: drm_gpuva_link pvr_vm_gpuva_remap __drm_gpuvm_sm_map pvr_vm_map pvr_ioctl_vm_map Link them to op->remap.unmap->va->vm_bo instead. The locking of the GPUVA lists of the other objects touched by a split is not addressed here; it is handled by switching the GPUVM to immediate mode.
-
CVE-2026-98920
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing alloc tagging of direct mempool allocations Commit 1d78d56c43ef ("netfs: Fix folio_queue ENOMEM in writeback by adding a mempool") added a mempool for the folio_queues and made the request, subrequest and folio_queue allocations distinguish between writeback and everything else. Writeback is part of memory reclaim and must not fail due to ENOMEM, so it allocates under GFP_NOFS through mempool_alloc(), which may dip into the pool's reserve and, if that runs empty, wait for elements to be returned. The GFP_KERNEL paths, which can return -ENOMEM to their callers, invoke the pool's ->alloc() callback directly instead. The direct call, however, skips the alloc_hooks() wrapper that the mempool_alloc() macro provides. The pool callbacks, mempool_alloc_slab() and mempool_kmalloc(), call kmem_cache_alloc_noprof() and kmalloc_noprof() and rely on current->alloc_tag having been set by the caller. With CONFIG_MEM_ALLOC_PROFILING_DEBUG=y this leads to current->alloc_tag not set WARNING: ./include/linux/alloc_tag.h:161 at __alloc_tagging_slab_alloc_hook alloc_tag was not set WARNING: ./include/linux/alloc_tag.h:166 at __alloc_tagging_slab_free_hook at allocation and free time respectively, as reported when reading files on a CIFS mount. The allocations are also missing from /proc/allocinfo. Wrap the direct ->alloc() invocations in alloc_hooks() with a new mempool_alloc_noreserve() helper in include/linux/mempool.h, next to the other alloc_hooks()-wrapped macros such as mempool_alloc(). The GFP_KERNEL paths keep their failable allocation semantics, they just get tagged now.
-
CVE-2026-98923
In the Linux kernel, the following vulnerability has been resolved: arm64: io: Reject non-user protection in ioremap_prot() Mapping a stack-top page via /dev/mem with PROT_NONE and then reading that process's /proc/<pid>/cmdline triggers a spurious WARN in ioremap_prot() through generic_access_phys(): WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys Call trace: generic_access_phys+0x1c8/0x228 (P) __access_remote_vm+0x2b4/0x398 access_remote_vm+0x14/0x30 get_mm_cmdline+0xf8/0x2a0 proc_pid_cmdline_read+0x68/0x120 generic_access_phys() passes the protection derived from the user PTE to ioremap_prot(). On arm64, a PROT_NONE mapping is represented by a present-invalid PTE, so pte_present() still returns true and the protection reaches ioremap_prot(). A PROT_NONE mapping does not have PTE_USER, causing the existing WARN_ON_ONCE() in ioremap_prot() to fire even though this is a valid user mapping. Execute-only mappings have the same issue and must not be readable through this path either. ioremap_prot() should therefore reject protection values without PTE_USER without warning. This makes the access fail cleanly for PROT_NONE and execute-only mappings while retaining the existing user-protection contract.
-
CVE-2026-98871
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix possible deadlock in SEV init failure path __sev_platform_init_handle_init_ex_path() calls rmp_mark_pages_firmware() with locked=false while the parent function of init_ex_path already acquired the sev_cmd_mutex. In the case of an RMPUPDATE failure for any page after the first, the cleanup path would invoke reclaim pages which would result in a deadlock in sev_do_cmd. Pass locked=true to honor the lock status of the parent function.
-
CVE-2026-99285
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_byteorder: remove multi-register support 64bit byteorder conversion is broken when several registers need to be converted because the source register array advances in steps for 4 bytes instead of 8: for (i = ... src64 = nft_reg_load64(&src[i]); ~~~~~ u32 *src nft_reg_store64(&dst64[i], Remove the multi-register support, it has other issues as well: Pablo points out that commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") alters semantics: before the loop operated on registers, i.e. for ( ... ) dst32[i] = htons((u16)src32[i]) .. but after the patch it will operate on bytes, which makes this useless to convert e.g. concatenations, which store each compound in its own register. Multi-convert of u32 has one theoretical application: ct mark . meta mark . tcp dport @intervalset Because ct mark and meta mark are host byte order, use with intervals has to convert the byteorder for ct/meta mark value to network byte order (bigendian). nftables emits this: [ meta load mark => reg 1 ] [ byteorder reg 1 = hton(reg 1, 4, 4) ] [ ct load mark => reg 9 ] [ byteorder reg 9 = hton(reg 9, 4, 4) ] ... I.e. two separate calls. Theoretically it could be changed to do: [ meta load mark => reg 1 ] [ ct load mark => reg 9 ] [ byteorder reg 1 = htonl(reg 1, 4, 8) ] ... But then all it would take to change the set to meta mark . tcp dport . ct mark ... and we'd be back to two "byteorder" calls. IOW, support to convert a range of registers is both dysfunctional and dubious. Simplify this: remove the feature. Pablo Neira Ayuso points out that nftables before 1.1.0 can generate incorrect byteorder conversions, see 9fe58952c45a, "evaluate: skip byteorder conversion for selector smaller than 2 bytes" in nftables.git). Affected rulesets fail to load with this change and old userspace due to 'len != size' check.
-
CVE-2026-118462
Update components download and execute code without proper authenticity verification, relying on ignored hashes or forgeable checksums. Some update paths also permit archive traversal or script execution.
-
CVE-2026-99211
In the Linux kernel, the following vulnerability has been resolved: netlink: reset skb headers before unicast and multicast filtering Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to an skb's network and MAC headers. Netlink producers may reserve headroom without resetting those headers, allowing a receiving socket's filter to read data before the initialized message. For example, IWPM HELLO replies are allocated with dev_alloc_skb(), which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can attach a classic socket filter and disclose this headroom through the length of the delivered reply. The resets in netlink_dump() do not help because IWPM sends a separately allocated skb through netlink_unicast(). Reset both headers before running the receiver's filter in unicast and broadcast delivery, as is already done for dump skbs. This also covers other netlink producers that reserve headroom without changing their allocation or message-building code.
-
CVE-2026-99183
In the Linux kernel, the following vulnerability has been resolved: accel/rocket: search every core slot when looking up a scheduler sched_to_core() walks rdev->cores[] up to rdev->num_cores, and rocket_remove() decrements num_cores for every core it removes. Unbind a core that is not the last one and the cores behind it fall outside the search, so sched_to_core() returns NULL for a core that is still bound and still running jobs. Neither caller checks the result: rocket_job_run(): rocket_fence_create(core), core->dev rocket_job_timedout(): dev_err(core->dev, "NPU job timed out") Unbinding the middle core of the three on an RK3588 while three clients are submitting to all of them faults twice, once from the surviving core's job queue and once from its reset work: KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] Workqueue: fdad0000.npu drm_sched_run_job_work [gpu_sched] pc : rocket_job_run+0x234/0x838 [rocket] Call trace: rocket_job_run+0x234/0x838 [rocket] drm_sched_run_job_work+0x2cc/0xad8 [gpu_sched] process_one_work+0x640/0x14f0 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: rocket-reset-2 drm_sched_job_timedout [gpu_sched] pc : rocket_job_timedout+0xf0/0x1e0 [rocket] Call trace: rocket_job_timedout+0xf0/0x1e0 [rocket] drm_sched_job_timedout+0x188/0x6a0 [gpu_sched] Both are the third core: the workqueue names are its device and its core->index, and it was left at slot 2 while num_cores had dropped to 2. Search all the slots that were allocated, the way find_core_for_dev() now does. A core that is still bound is then found, and the two callers get the pointer they already assume they have. This does not make unbinding one core out of several safe. An open client keeps an entity pointing at the scheduler of the core that went away: drm_sched reports it as not ready for every job that lands on it, and the client waits in dma_fence_default_wait for a fence that will never signal. Stopping the NULL dereference is what belongs in a fix; the rest wants more thought.
-
CVE-2026-99184
In the Linux kernel, the following vulnerability has been resolved: accel/rocket: search every core slot when a core is removed rocket_remove() decrements rdev->num_cores for each core it removes, while find_core_for_dev() searches slots 0 to num_cores - 1. Unbinding the cores in the order they were bound therefore loses the last one: by the time it is removed the search range has already shrunk past its slot, so find_core_for_dev() returns -1 and rocket_remove() gives up without doing anything. num_cores never reaches zero, rocket_device_fini() never runs, and the file-scoped rdev keeps pointing at a device that is going away. Binding the cores again starts from that stale count, because rocket_probe() takes rdev->num_cores as the slot to fill. On an RK3588, which describes three cores, the second round lands on slots 1, 2 and 3 while rdev->cores was allocated with room for three: rocket fdab0000.npu: Rockchip NPU core 1 version: 1179210309 rocket fdac0000.npu: Rockchip NPU core 2 version: 1179210309 rocket fdad0000.npu: Rockchip NPU core 3 version: 1179210309 The write to rdev->cores[3] is past the end of the array. Nothing in tree reads the core array often enough to notice, so the overrun is silent today. It turned up while testing a devfreq series on top of this, where a worker walks every core a few times a second, and UBSAN caught the first bool it read out of the overrun entry: UBSAN: invalid-load in drivers/accel/rocket/rocket_devfreq.c:47:10 load of value 5 is not a valid value for type '_Bool' Workqueue: devfreq_wq devfreq_monitor Record how many slots were allocated and search all of them. Every core is then found on removal, num_cores reaches zero, the device is torn down and a later bind starts from a clean rdev. This does not make unbinding a single core out of several work. probe still takes num_cores as the slot to fill, so rebinding one core while its siblings stay bound would write over a slot that is already in use, and rocket_open() still reaches for cores[0] whether or not anything is there. Both of those want more thought than a fix should carry. Found by unbinding and rebinding all three cores on an Orange Pi 5 Plus. With this applied, 25 unbind/rebind rounds and 5 module unload/reload rounds run clean there: the cores land in slots 0, 1 and 2 every time, whichever order they are bound in, and the shared supply goes back to a single user after each round.
-
CVE-2026-99137
In the Linux kernel, the following vulnerability has been resolved: cifs: don't update i_size in cifs_do_truncate without a cached handle If find_writable_file() returns null, cifs_file_flush will return 0 without issuing set_file_size, and the outer 'if (!rc)' block will set i_size to 0 before telling the server to truncate. If the cifs_open() then fails, the inode will have size 0, while the server file is unchanged. Move the netfs_resize_file() and cifs_setsize() into the 'if (cfile)', so they only run after a successful set_file_size. In the no-handle else branch, evict stale pages with truncate_inode_pages before the O_TRUNC open to dispose of old cache pages, and let the open response set the i_size.
-
CVE-2026-99111
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix data corruption with concurrent writes and O_TRUNC cifs_do_truncate() flushes dirty pages with filemap_write_and_wait() and truncates the file on the server, but in the old code both operations ran without holding i_rwsem or invalidate_lock. A concurrent buffered write via netfs_perform_write() -- which only needs i_rwsem shared -- could dirty new pages after the flush but before the local truncation, and those pages would be silently discarded by cifs_setsize() -> truncate_pagecache(). Fix by acquiring inode_lock (exclusive i_rwsem) and filemap_invalidate_lock at the top of cifs_do_truncate(), so the entire flush-truncate-resize sequence is atomic with respect to: - buffered writes (blocked by exclusive i_rwsem, since netfs_start_io_write takes i_rwsem shared), - read page faults (blocked by exclusive invalidate_lock, since filemap_fault takes it shared), - writeback collection (blocked by netfs_wb_begin/netfs_wb_end around the server truncate and local resize, since netfs_writepages also acquires the wb lock).
-
CVE-2026-98929
In the Linux kernel, the following vulnerability has been resolved: macsec: initialize SecY before registering the netdevice Creating a MACsec device with MAC offload over an LRO-capable lower device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4 forwarding is enabled by default. register_netdevice() invokes inetdev_init(), which disables LRO and emits a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before macsec_add_dev() initializes the SecY. key_len is still zero, so macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in rtmsg_ifinfo_build_skb(), even though the skb has enough space. Even without the warning, notifications during registration can report uninitialized SecY attributes, including the SCI. This ordering has existed since the driver was introduced. Initialize the SecY and apply the new-link attributes before registration. Move MAC address inheritance into macsec_newlink() so the SCI can also be initialized before registration-time notifications report it. Move the per-CPU statistics and metadata destination allocation into ndo_init(), and release partial allocations on failure.
-
CVE-2026-131047
Race condition in ServiceManager in Google Chrome prior to 158.0.8127.36 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to bypass web origin policy via a crafted Chrome extension. (Chromium security severity: Medium)
-
CVE-2026-130911
Race condition in DevTools in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to bypass web origin policy into a privileged page via a crafted Chrome extension. (Chromium security severity: Low)
-
CVE-2026-84443
LibreOffice Base documents can bind macros to document events, such as opening or closing the document. The macro security setting decides whether macros that come with a document may run. Macros bound to the events of a Base document were run without the macro security setting being applied, so opening or converting a crafted database document could run a macro and, through it, any command. In fixed versions macros bound to the events of a Base document follow the macro security setting, as macros in other documents do.
-
CVE-2026-101930
LibreOffice Writer can open HTML documents, and an HTML document can bind macros to events of the document as a whole, such as the document being opened or closed. Macros bound to these events were not taken into account by the macro security check, so they could run when the document was opened, whatever the macro security level. In fixed versions these macros follow the macro security settings like any other macro in the document.
-
CVE-2026-101353
LibreOffice Base documents can contain an embedded HSQLDB database, and other documents can use such a database as a data source. The definition of the database in a crafted document could make the database engine create or write files at locations outside the document, chosen by the document. In fixed versions the files of an embedded database are kept in a private location, and an embedded database cannot create table files anywhere else.
-
CVE-2026-121876
A flaw was found in the interaction between systemd-gpt-auto-generator and confidential computing guest VM images in OpenShift Sandboxed Containers (confidential peer pods). systemd-gpt-auto-generator automatically discovers and mounts GPT partitions by type GUID at boot with no user confirmation. In the confidential computing threat model, where the host/hypervisor is the adversary, a malicious host can inject partitions into the guest's virtual disk. Most critically, injecting a swap partition causes the guest kernel to page out TEE-encrypted memory to a host-controlled block device, breaking the confidentiality guarantee of the hardware TEE (AMD SEV-SNP, Intel TDX). The PodVM images use a GPT-partitioned disk with dm-verity on the root partition. However, the roothash= kernel parameter only disables root auto-discovery — non-root partitions (swap, /home, /var, /srv, /var/tmp) are still auto-discovered and mounted. The generator is shipped unmasked in the RHEL systemd-udev subpackage, and no kernel command line parameter in the measured UKI addon disables it. Additionally, the PodVM measurement script captures PCRs 3, 9, 11, and 12, but not PCR 5 (GPT partition table), so partition table modifications are not detected by remote attestation.
-
CVE-2026-112369
IBM Process Mining 2.0.0 through 2.2.1 could allow an authenticated user to perform unauthorized actions due to client-side enforcement of sever side security mechanisms.
A list of CVEs whose flaw type is other, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.