CVE-20XX-?
agent?

Other CVEs.

Published CVEs classified as other, ranked by exploit odds.

2,669 CVEs · updated 2026-11-19 15:16 UTC

Reset all
  1. CVE-2026-99254

    In the Linux kernel, the following vulnerability has been resolved: io_uring: don't flood a cancelling task with task_work io_ring_exit_work() asks each task which has used the ring to remove its tctx node, by task_work, and repeats that until the list is empty. io_tctx_exit_cb() doesn't touch the node while the task is in io_uring_cancel_generic(), which removes all the nodes at its end. So the work item queues the callback again as soon as it has completed, for nothing. That is more than a waste of time. task_work_run() only returns when it finds the list empty. If the rings are released from inside the cancellation, because requests of other rings held the last references to their files, up to 64 work items keep sending callbacks to the one task which is running them. It never finds the list empty, never gets back to the cancellation, the nodes stay, and so it goes on: a task with 60 pairs of rings which poll each other ran 280000 callbacks in 5 seconds, 20 seconds after exit_group(). It ends when all the senders happen to be late at the same time. Until then the task keeps a CPU and the work items busy. An exiting task can't be killed meanwhile. execve() cancels the requests in the same way, so a live task can get stuck there as well, for minutes. If it takes more than five, the work items run into the WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No privilege is needed for any of this. If the callback has met a task in cancellation, wait a little before it is sent again. Nobody has to wake the work item up for that: either the node is gone by then, or it is the turn of the next round.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-99255

    In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't hide a link from cancellations A task that exits cancels its tracked requests and waits until they are gone. io_uring_cancel_generic() looks everywhere a request can be, and goes to sleep if it found nothing to cancel. It is woken up each time one of the requests of the task is completed by task work or freed. When io-wq is done with a request that has a link, there is a time in which the next request of the link can't be found: io_worker_handle_work() io_assign_current_work(worker, NULL) io_wq_free_work(work) io_req_find_next() // takes the link off the request io_free_req() // task work for the task io_assign_current_work(worker, linked) io_run_task_work() cond_resched() worker->cur_work = linked It is not pending, it is not the current work of a worker, and it is not yet on the list that it is about to be parked on. If the pass that the exiting task makes because of io_free_req() falls into that time, it finds nothing and the task goes to sleep. The worker then runs the link, which IO_WQ_BIT_EXIT doesn't prevent for bounded work. If that parks the request nothing is completed or freed, and nobody wakes up the task. If it is the process that exits it can't be killed any more either. NOP, IOSQE_ASYNC | IOSQE_IO_LINK FUTEX_WAIT, FUTEX2_PRIVATE exit of the thread, or of the process, up to 63us later With four of these per round 5 to 8 of 10,000 rounds hang (4 CPUs, KVM): io_uring_cancel_generic do_exit Commit f8b632e89a10 ("io_uring: tighten task exit cancellations") is about the same gap, and makes the task look again for whatever happens before io_free_req(). Free the request once the link is the current work of the worker, or pending. Whoever is woken up by that can find the link, until it is parked where cancellations look as well. To do so split io_wq_free_work() in two.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-99244

    In the Linux kernel, the following vulnerability has been resolved: pid_namespace: prevent TIF_NOTIFY_SIGNAL from interrupting the reaper Since commit 7fea700e04bd ("zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") zap_pid_ns_processes() clears TIF_NOTIFY_SIGNAL before every kernel_wait4() call. Otherwise kernel_wait4() doesn't sleep and returns -ERESTARTSYS if signal_pending() is true and the reaper busy-waits. But clearing TIF_NOTIFY_SIGNAL doesn't fix it. It can get raised again. For example, klp_send_signals() sets it raw against any task that hasn't transitioned yet. And it keeps sending it until the livepatch finishes. The sleep loop waiting for pid_allocated to drop has the same problem and it doesn't even clear anything. So a schedule() in TASK_INTERRUPTIBLE returns immediately. Use a no_notify_signal guard. signal_pending() will ignore TIF_NOTIFY_SIGNAL and the pid namespace reaper sleeps until a child exits or free_pid() wakes it.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-118544

    Exposure of Sensitive Information Through Data Queries vulnerability in Drupal Commerce Core allows Forceful Browsing. This issue affects Commerce Core versions: from 0.0.0 to 2.41.0, from 3.0.0 to 3.3.13.

    Other Web app

    3.7 LOW 0.2% exploit odds No fix listed
  5. CVE-2026-118656

    Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, sanitizeURI checks only the first two bytes of a redirect target before deciding whether it begins with an absolute-path separator pair. When AddTrailingSlash or RemoveTrailingSlash is configured with a redirect status, a slash, TAB, separator path form can evade the guard, be emitted in the Location header, and be normalized by a browser into an attacker-controlled host. This issue is fixed in 4.16.0 and 5.4.0.

    Other Web app

    6.1 MEDIUM 0.2% exploit odds Fix listed
  6. CVE-2026-99181

    In the Linux kernel, the following vulnerability has been resolved: autofs: ignore notification errors from a replaced pipe autofs_notify_daemon() takes a reference to the current notification pipe under wq_mutex, then drops the mutex before writing the request. The write can block while the daemon enters catatonic mode and installs a replacement pipe. If the old pipe's reader is then closed, the delayed write returns -EPIPE and the generic error path enters catatonic mode again. That transition acts on the current superblock state, closes the replacement pipe, and releases the new daemon generation's wait queues. Only enter catatonic mode when the pipe which failed is still the current pipe. Factor the already-locked transition so the identity check and state change are atomic with respect to another replacement. This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest. An unprivileged UID 65534 lookup filled the old packet pipe before a normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe received HUP and both a pending victim lookup and a later lookup failed with ENOENT in two out of two fresh-mount runs. With this change, the new pipe remained active, received an intact 304-byte request, and both victim lookups completed in two out of two runs. Normal lookup and restart-without-a-blocked-writer controls passed. No KASAN, oops, refcount, or lock diagnostic was observed. A source reproducer and complete local logs are available privately on request. The demonstrated impact is limited to denial of a shared autofs service during a legitimate daemon restart. No memory corruption, information leak, privilege escalation, or code execution primitive was observed.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-112326

    GitLab has remediated an issue in GitLab EE affecting all versions from 17.8 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, under certain conditions, could have allowed an authenticated user with read-only permissions to permanently delete existing vulnerability records due to improper cleanup logic that failed to distinguish between pre-existing records from newly created ones during error handling.

    Other Web app GitLab

    3.1 LOW 0.2% exploit odds Fix listed
  8. CVE-2026-123353

    Docmost is open-source collaborative wiki and documentation software. Prior to 0.96.0, two concurrent role-demotion requests from a space admin or workspace owner can each pass the last-admin or last-owner count check before either update is committed because the validation and role update are not serialized in one transaction. The requests can therefore demote the final two space admins or workspace owners and leave the affected space without an admin or the workspace without an owner, preventing normal administrative recovery. This issue is fixed in version 0.96.0.

    Other Web app

    3.3 LOW 0.2% exploit odds Fix listed
  9. CVE-2026-129953

    NodePress through 8.5.1 contains a rate limit bypass vulnerability that allows unauthenticated attackers to evade throttling by spoofing the X-Forwarded-For header, because trustProxy is enabled. Attackers can send X-Forwarded-For set to 127.0.0.1 or rotate values to brute-force the administrator password via POST /admin/login and evade comment IP blocklists.

    Other Web app

    6.9 MEDIUM 0.2% exploit odds No fix listed
  10. CVE-2026-21174

    Improper access control in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to bypass APK verification.

    Other Device

    6.0 MEDIUM 0.2% exploit odds No fix listed
  11. CVE-2026-76894

    CKAN MCP Server is a tool for querying CKAN open data portals. Prior to 0.4.112, the DataStore table UI in src/resources/datastore-table-ui.ts accepts window message events without validating event.origin and sends JSON-RPC messages through postMessage with a wildcard target origin. A frame that can reach the embedded document can inject fabricated fields or records, spoof pending ui/initialize responses, disrupt the MCP UI handshake, or receive outbound messages when the resource is embedded by an untrusted parent. Values are HTML escaped, so the demonstrated content injection is display spoofing rather than script execution, and exploitability depends on the host embedding model. This issue is fixed in version 0.4.112.

    Other Device

    3.1 LOW 0.2% exploit odds Fix listed
  12. CVE-2026-105769

    kaniko before 1.25.20 can send a Microsoft Entra ID (Azure AD) access token for Azure Resource Manager to an attacker-controlled registry host. kaniko uses the Azure Container Registry credential helper github.com/chrismellard/docker-credential-acr-env, which decides whether a host is an ACR registry with an unanchored regular expression, so any hostname containing .azurecr.io, .azurecr.cn, .azurecr.de or .azurecr.us is accepted. kaniko consults this helper for any registry that has no credentials in the Docker config and is not a Google or Amazon ECR registry, before contacting the registry. A Dockerfile that references an image on a lookalike host, such as FROM x.azurecr.io.attacker.com/img or COPY --from=<image>, causes the helper to obtain a token from the build's Azure identity (service principal environment variables, federated workload identity token, or managed identity) and POST it to https://<host>/oauth2/exchange. The attacker can use the token against Azure Resource Manager with the identity's role assignments until it expires, and can exchange it for credentials to any ACR registry the identity can access. No RUN instruction or push is required. This issue is fixed in 1.25.20.

    Other Server

    9.3 CRITICAL 0.2% exploit odds Fix listed
  13. CVE-2026-86936

    A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to gain root privileges.

    Other OS & kernel Apple macOS

    7.8 HIGH 0.2% exploit odds Fix listed
  14. CVE-2026-121717

    fzf is a command-line fuzzy finder. Prior to 0.74.5, trigger-driven zsh completion in shell/completion.zsh uses _fzf_feed_fifo to create a FIFO at the predictable shared path ${TMPDIR:-/tmp}/fzf-complete-fifo-$$ and continues after removal or creation errors. On a multi-user host, a local attacker can pre-create that path as a symlink so the victim's completion stream overwrites a victim-writable file, potentially enabling code execution when that file is later sourced. A pre-created FIFO can instead disclose a bounded stream of completion candidates or block completion. On default modern hosts, fs.protected_symlinks blocks the overwrite variant, and protected_fifos and protected_regular further limit the FIFO disclosure and blocking variants, so exploitation depends on the relevant kernel protections being disabled and on the victim invoking the affected completion. This issue is fixed in version 0.74.5.

    Other OS & kernel Junegunn Fzf

    5.0 MEDIUM 0.2% exploit odds Fix listed
  15. CVE-2026-110737

    The push endpoint of a Vaadin application that uses server push reflects the request Origin into the Access-Control-Allow-Origin response header and allows credentials, because Flow configures Atmosphere with DROP_ACCESS_CONTROL_ALLOW_ORIGIN_HEADER set to false and its CorsInterceptor then echoes whatever Origin the request carries. A page on any origin can therefore make a cross origin request to that endpoint with the user's cookies and read the response, although reading anything useful also requires the push identifier of that session. Applications that do not use @Push are not affected, and neither is the WebSocket transport. The behaviour was introduced in January 2015 and is present in every Flow release and in Vaadin Framework from 7.1.0, which is when push was added. Users of affected versions should apply the following mitigation or upgrade. Releases that have fixed this issue include: Product version Vaadin 14.14.0 - 14.14.7 Vaadin 23.6.0 - 23.6.16 Vaadin 24.4.0 - 24.4.25 Vaadin 24.5.0 - 24.5.15 Vaadin 24.6.0 - 24.6.13 Vaadin 24.7.0 - 24.7.16 Vaadin 24.8.0 - 24.8.17 Vaadin 24.9.0 - 24.9.23 Vaadin 24.10.0 - 24.10.11 Vaadin 25.0.0 - 25.0.13 Vaadin 25.1.0 - 25.1.13 Vaadin 25.2.0 - 25.2.10 Vaadin 25.3.0 - 25.3.2 Vaadin Framework 7.1.0 - 7.7.54 Vaadin Framework 8.0.0 - 8.32.1 Mitigation Upgrade to 14.14.8 Upgrade to 23.6.17 Upgrade to 24.4.26 Upgrade to 24.7.17 Upgrade to 24.7.17 Upgrade to 24.7.17 Upgrade to 24.9.24 Upgrade to 24.9.24 Upgrade to 24.10.12 Upgrade to 25.2.11 Upgrade to 25.2.11 Upgrade to 25.2.11 Upgrade to 25.3.3 Upgrade to 7.7.55 Upgrade to 8.32.2 Please note that Vaadin versions 10-13 and 15-22 are no longer supported and you should update either to the latest 14, 23, 24, 25 version. Artifacts under com.vaadin Maven coordinates / Vulnerable versions / Fixed version vaadin / 14.14.0 - 14.14.7 / >=14.14.8 vaadin / 23.6.0 - 23.6.16 / >=23.6.17 vaadin / 24.4.0 - 24.4.25 / >=24.4.26 vaadin / 24.5.0 - 24.5.15 / >=24.7.17 vaadin / 24.6.0 - 24.6.13 / >=24.7.17 vaadin / 24.7.0 - 24.7.16 / >=24.7.17 vaadin / 24.8.0 - 24.8.17 / >=24.9.24 vaadin / 24.9.0 - 24.9.23 / >=24.9.24 vaadin / 24.10.0 - 24.10.11 / >=24.10.12 vaadin / 25.0.0 - 25.0.13 / >=25.2.11 vaadin / 25.1.0 - 25.1.13 / >=25.2.11 vaadin / 25.2.0 - 25.2.10 / >=25.2.11 vaadin / 25.3.0 - 25.3.2 / >=25.3.3 vaadin-core / 14.14.0 - 14.14.7 / >=14.14.8 vaadin-core / 23.6.0 - 23.6.16 / >=23.6.17 vaadin-core / 24.4.0 - 24.4.25 / >=24.4.26 vaadin-core / 24.5.0 - 24.5.15 / >=24.7.17 vaadin-core / 24.6.0 - 24.6.13 / >=24.7.17 vaadin-core / 24.7.0 - 24.7.16 / >=24.7.17 vaadin-core / 24.8.0 - 24.8.17 / >=24.9.24 vaadin-core / 24.9.0 - 24.9.23 / >=24.9.24 vaadin-core / 24.10.0 - 24.10.11 / >=24.10.12 vaadin-core / 25.0.0 - 25.0.13 / >=25.2.11 vaadin-core / 25.1.0 - 25.1.13 / >=25.2.11 vaadin-core / 25.2.0 - 25.2.10 / >=25.2.11 vaadin-core / 25.3.0 - 25.3.2 / >=25.3.3 flow-server / 2.13.0 - 2.13.7 / >=2.13.8 flow-server / 23.6.0 - 23.6.15 / >=23.6.16 flow-server / 24.4.0 - 24.4.18 / >=24.4.19 flow-server / 24.5.0 - 24.5.17 / >=24.7.17 flow-server / 24.6.0 - 24.6.14 / >=24.7.17 flow-server / 24.7.0 - 24.7.15 / >=24.7.16 flow-server / 24.8.0 - 24.8.16 / >=24.9.24 flow-server / 24.9.0 - 24.9.28 / >=24.9.29 flow-server / 24.10.0 - 24.10.14 / >=24.10.15 flow-server / 25.0.0 - 25.0.15 / >=25.2.11 flow-server / 25.1.0 - 25.1.18 / >=25.1.19 flow-server / 25.2.0 - 25.2.12 / >=25.2.13 flow-server / 25.3.0 - 25.3.3 / >=25.3.4 vaadin-server / 7.1.0 - 7.7.54 / >=7.7.55 vaadin-server / 8.0.0 - 8.32.1 / >=8.32.2 vaadin-server-mpr-jakarta / 7.7.36 - 7.7.54 / >=7.7.55 vaadin-server-mpr-jakarta / 8.18.0 - 8.32.1 / >=8.32.2

    Other Server

    2.3 LOW 0.2% exploit odds Fix listed
  16. CVE-2026-101592

    Vulnerability in the Oracle Agile Product Lifecycle Management for Process product of Oracle Supply Chain (component: Product Quality Management). The supported version that is affected is 6.2.4. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Agile Product Lifecycle Management for Process. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Agile Product Lifecycle Management for Process, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Agile Product Lifecycle Management for Process accessible data as well as unauthorized read access to a subset of Oracle Agile Product Lifecycle Management for Process accessible data. CVSS 3.1 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N).

    Other Web app

    5.4 MEDIUM 0.2% exploit odds No fix listed
  17. CVE-2026-111747

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 19.0 before 19.3.9, 19.4 before 19.4.8, and 19.5 before 19.5.6 that under certain conditions could have allowed an authenticated user to hide changes from reviewers in merge request diffs due to improper handling of file names.

    Other Web app

    3.5 LOW 0.2% exploit odds No fix listed
  18. CVE-2026-126289

    NocoDB before 2026.06.1 contains a CSV formula injection vulnerability in export.service.ts that writes record values and column titles beginning with formula characters into CSV exports without neutralization. Low-privileged collaborators, or unauthenticated users submitting a public form, can plant formulas that execute when a user opens the export in a spreadsheet application, potentially exfiltrating cell contents or invoking external commands.

    Other Web app

    5.1 MEDIUM 0.2% exploit odds Fix listed
  19. CVE-2026-117976

    Site isolation issue in the DOM: Navigation component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6.

    Other Browser & mail

    8.1 HIGH 0.2% exploit odds Fix listed
  20. CVE-2026-117958

    Site isolation issue in the Networking: HTTP component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6.

    Other Browser & mail

    8.1 HIGH 0.2% exploit odds Fix listed
  21. CVE-2026-117603

    Electrum before 4.7.2 contains a spending limit bypass vulnerability in the Nostr Wallet Connect plugin that allows malicious NWC clients to exceed daily_limit_sat by exploiting non-atomic budget checks and millisatoshi truncation. Attackers can send concurrent pay_invoice requests that pass budget_allows_spend() before add_to_budget() runs, or repeatedly pay msat amounts that are floored to whole satoshis, to drain funds beyond the limit.

    Other Web app

    9.3 CRITICAL 0.2% exploit odds Fix listed
  22. CVE-2026-111974

    The GiveWP WordPress plugin before 4.19.0.1 does not restrict the currency of a donation to the one the site or form accepts, while comparing its amount limits as bare numbers, allowing unauthenticated users to make donations below a form's configured minimum or fixed amount.

    Other Web app

    5.3 MEDIUM 0.2% exploit odds No fix listed
  23. CVE-2026-99005

    In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Unmask interrupts only when ACTIVE is true There is a small race window between intel_rps_boost() reading a stale ACTIVE state and queuing rps->work, where ACTIVE may be changed via asynchronous calls triggered by wakeref drop. This means that rps_work() could be triggered after the GT has been parked, so unmasking RPS PM interrupts would happen without holding PM wakelock. This sequence of events may be observed during live_rc6_ctx_wa() selftest: 1) live_rc6_ctx_wa() -> intel_engine_pm_put() -> wakeref_put() ASYNC1) wakeref_put() callback -> __engine_park() -> intel_gt_pm_put_async() -> intel_gt_pm_put_async_untracked() -> intel_wakeref_put_async() ASYNC2) wakeref_put_async() callback -> __gt_park() -> intel_rps_park() -> intel_rps_clear_active() [clear ACTIVE] WITH INTERRUPTS: -> rps_disable_interrupts() -> cancel_work_sync(rps->work) -> rps_reset_interrupts() [rps->pm_iir = 0] WITHOUT INTERRUPTS (TIMER mode): -> rps_stop_timer() -> cancel_work_sync(rps->work) 2) live_rc6_ctx_wa() -> intel_gt_wait_for_idle() -> intel_gt_retire_requests_timeout() -> dma_fence_wait_timeout() -> ops->wait() [i915_fence_wait()] -> i915_request_wait_timeout() -> intel_rps_boost() -> intel_rps_is_active() [check ACTIVE] [OPEN RACE WINDOW] -> queue_work(rps->work) -> retire_requests() -> i915_request_retire() -> intel_rps_dec_waiters() [from 1 to 0] If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW], then: 3) rps_work() executes from the workqueue and may satisfy "(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir is zeroed by an earlier rps_work() call or never gets a new value after previous intel_rps_unpark() event), so it jumps to "out" label, bypassing intel_rps_is_active() guard and executes gen6_gt_pm_unmask_irq(); 4) GT is parked and runtime PM wakelock is dropped, so only a raw reference in __gt_park() -> intel_display_power_put_async() remains for 100ms, then the MMIO write in gen6_gt_pm_unmask_irq() detects missing wakelock via assert_rpm_wakelock_held() and emits "RPM wakelock ref not held during HW access" tainting kernel. Commit 3e7abf814193 ("drm/i915: Extract GT render power state management") dropped the "if (rps->interrupts_enabled)" guard that gen6_pm_rps_work() had around this unmask in i915_irq.c. INTEL_RPS_ACTIVE brackets the same window, since it is set in intel_rps_unpark() before rps_enable_interrupts() and rps_start_timer() and cleared in intel_rps_park() before rps_stop_timer() and rps_disable_interrupts(). Skip unmasking when RPS is no longer active (reaching unmask operation is independent of INTERRUPT mode). This does not prevent RPS operation from resuming on the next unpark. In interrupt mode, intel_rps_unpark() calls rps_enable_interrupts(), which enables and unmasks the PM interrupts. In timer mode, it calls rps_start_timer(), restarting periodic engine-busyness evaluation. The timer generates software RPS events and queues rps_work() directly, independently of PM interrupt delivery. Neither mode requires the late worker to unmask interrupts while the GT is parked (cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-119039

    The Defender Security WordPress plugin before 6.4.1 does not verify that the client IP address it derives for its firewall and lockout decisions actually originates from a trusted source, trusting a user-supplied value by default, allowing unauthenticated attackers to spoof their IP address and evade IP-based protections such as login lockout and IP banning, impersonate an allowlisted address, and poison the Defender Security WordPress plugin before 6.4.1's activity logs.

    Other Web app

    5.3 MEDIUM 0.2% exploit odds No fix listed
  25. CVE-2026-121759

    The Fusion Page Builder WordPress plugin before 1.7.1 does not check that the user owns the content it moves to the trash, which could allow users with a role as low as Contributor to trash arbitrary posts and pages, or delete them permanently where the trash is disabled.

    Other Web app

    4.9 MEDIUM 0.2% exploit odds No fix listed
  26. CVE-2026-121439

    Wasmtime 46.0.0 before 48.0.7 and 49.0.0 before 49.0.4 contains a response splitting vulnerability in wasi-http p3 that allows guests to set unvalidated content-length headers. Malicious wasip3 guests can splice an existing body into a new response with an incorrect content-length to perform response splitting or injection attacks.

    Other

    6.9 MEDIUM 0.2% exploit odds Fix listed
  27. CVE-2026-63121

    Kubewarden policies is a collection of WebAssembly policies for securing and governing Kubernetes clusters. For versions provisionally classified as affected before 2.1.2, `trusted-repos-policy` compares an image's `registry` hostname against `reject lists` and `allow lists` case-sensitively even though `registry` DNS names are case-insensitive. An image with an uppercase or mixed-case `registry` hostname can miss a rejection rule for the equivalent lowercase host, so the admission policy accepts a resource whose container runtime pulls the same prohibited image. Only reject-list configurations have this bypass: allow-list configurations fail closed by over-denying differently cased hostnames. The security consequences depend on the configured rejection policy and deployment environment. This issue is fixed in version 2.1.2.

    Other Server

    6.3 MEDIUM 0.2% exploit odds Fix listed
  28. CVE-2026-115249

    A flaw has been found in subhajitkhan online-clinic-management-system up to e9ee77a8827a1446220fa07ee693dc4d9a29a578. Impacted is an unknown function of the file patappointtime.php of the component Appointment Booking. This manipulation of the argument day/time/appdate causes improper input validation. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.

    Other Web app

    2.0 LOW 0.2% exploit odds No fix listed
  29. CVE-2026-127318

    Vulnerability in the Oracle AutoVue product of Oracle Supply Chain (component: Security). The supported version that is affected is 21.1.0.7. Difficult to exploit vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the Oracle AutoVue executes to compromise Oracle AutoVue. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle AutoVue accessible data. CVSS 3.1 Base Score 3.1 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N).

    Other

    3.1 LOW 0.2% exploit odds No fix listed
  30. CVE-2026-115180

    Vulnerability in the Oracle Hyperion Financial Close Management product of Oracle Hyperion (component: Reconciliation Manage). The supported version that is affected is 11.2.26.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the Oracle Hyperion Financial Close Management executes to compromise Oracle Hyperion Financial Close Management. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hyperion Financial Close Management accessible data. CVSS 3.1 Base Score 3.1 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N).

    Other

    3.1 LOW 0.2% exploit odds No fix listed
  31. CVE-2026-99258

    In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Avoid using per-cpu output page in hv_apicid_to_vp_index() hv_apicid_to_vp_index() currently uses the per-cpu hypercall input and output pages. This function is called when running in VTL2 and when running in an SEV-SNP CoCo VM with no paravisor. In the former case, the output page is allocated, but in the latter case it is not, so the hypervisor stores the output VP index in memory that has not been allocated by the guest. Fix this by using the input page for both input and output. The hypercall has very small input and output, so sharing the same page for both is straightforward. An alternative fix is to allocate the per-cpu output page when running in an SEV-SNP CoCo guest, but this uses significantly more memory, particularly with larger vCPUs counts.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-118581

    A BSON encoding component of the MongoDB Java Driver does not verify that an externally supplied raw document's self-declared length agrees with the extent of the byte range it is given before that range is copied into an outgoing database command. An application that wraps untrusted raw bytes in such a document and uses it as part of a command can therefore emit a structurally inconsistent message, causing the database to interpret attacker-supplied trailing content as additional fields of the surrounding command. No authentication to the driver or database is required beyond the ability to influence those bytes through the victim application, and no user interaction is needed. The result is unintended modification of the command actually executed, which can alter the data read or written under the application's credentials.

    Other OS & kernel

    6.9 MEDIUM 0.2% exploit odds Fix listed
  33. CVE-2026-98894

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: reset CPER ring on corrupt entry size When CPER ring overflow handling advances the read pointer, it trusts the parsed entry size from the current ring contents. Corrupt CPER data can produce an entry size that does not advance rptr after dword conversion and pointer masking. In that case the recovery loop keeps testing the same location while holding the CPER ring mutex. This can hang the worker that is writing the next CPER record. Detect a no-progress rptr update and reset the CPER ring to an empty state instead. This drops the corrupt contents and lets the writer leave the recovery path without spinning.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-98897

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: don't hold ci->m_lock while waiting for a lease break ack When a cifs.ko client caches a read-handle (RH) lease via deferred close and a conflicting open arrives, ksmbd breaks the lease and waits for the acknowledgment in wait_for_break_ack() for up to OPLOCK_WAIT_TIME (35s). __smb_break_all_levII_oplock() runs that wait while holding ci->m_lock for read. cifs.ko reacts to a handle-lease break by closing the deferred handle rather than sending a lease break acknowledgment. That close path (close_id_del_oplock() -> opinfo_del()) takes ci->m_lock for write and is exactly what would wake the waiter, but it blocks on the read lock held by the waiting thread. The break is then resolved only by the 35s timeout, so xfstests generic/001 takes ~78s with leases enabled versus ~4s with oplocks only. Collect the target opinfos (each pinned with a reference) while holding ci->m_lock, then break them after releasing it, matching how smb_grant_oplock() already breaks a conflicting lease using only a reference. The reference keeps the opinfo (and its conn and lease) alive across the unlocked window, and a close racing the break is handled by the existing OPLOCK_CLOSING state check. Apply the same fix to the parent lease break paths.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-98878

    In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when injecting a physical interrupt into a guest VM in software. The GICv5 driver has so far done the priority drop as part of irq_eoi(), i.e., at the same time as deactivating the interrupt. This means that any long running process (or VM) could block incoming interrupts, effectively causing a denial of service for all other interrupts. Rather than doing the EOI as part of irq_eoi() (which the name would suggest would be a good place for it), move it to happen immediately after acknowledging an interrupt in the main GICv5 interrupt handler. The deactivation of interrupts (GIC CDDI) remains implemented as part of irq_eoi(), which means that the same interrupt cannot be signalled a second time until deactivated by software.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-98874

    In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect Clearly, from a user perspective, it must be valid to configure WoWLAN and then suspend while not connected to a network. Since mac80211 doesn't distinguish these cases and simply calls the driver to suspend whenever WoWLAN is configured, the driver has to cleanly handle the case where it's called for WoWLAN, it's not connected but there's also no netdetect configured. Remove the WARN_ON() and keep returning 1 to disconnect and then suspend.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  37. CVE-2025-66621

    Apache James SASL OAuthBearer/XOAUTH2 prior versions 3.9.1 fails to validate correctly AUD claim of JWT payloads when introspection is not configured. This allows an attacker with valid credentials to access the mail server even if they are not authorized to do so. We recommend users to upgrade to non vulnerable version that forces explicit configuration of aud claims and forces introspection.

    Other Server

    8.1 HIGH 0.2% exploit odds Fix listed
  38. CVE-2026-121432

    AzuraCast before 0.24.0 contains a CRLF injection vulnerability that allows low-privilege station users to inject playlist entries by embedding CR/LF sequences in mount or remote relay display_name values. Attackers with Station:MountPoints or Station:RemoteRelays permission can inject FileN= and TitleN= lines into the public playlist.pls to redirect guest listeners to attacker-controlled streams under the victim station's name.

    Other

    5.1 MEDIUM 0.2% exploit odds Fix listed
  39. CVE-2026-117680

    Improper Check for Unusual or Exceptional Conditions vulnerability in the pattern and patternProperties keywords in lud jsv allows an unauthenticated remote attacker to bypass schema validation via a string that matches a schema regex only after heavy backtracking. JSV.Helpers.RegexExt.bounded_match?/2 runs schema regexes with a backtracking budget but calls :re.run/3 without :report_errors, so a match that exhausts the budget returns the same :nomatch as a real non-match. A key that matches a patternProperties regex is then checked against additionalProperties or not at all, and a string that matches a not subschema with a pattern is accepted. Before the budget existed, Regex.match?/2 failed the same way at Erlang's default match limit. Only schemas whose regex explores a catastrophic branch before the branch that matches are affected. The attacker controls the data, not the schema, and linear patterns never exhaust the budget. This issue affects jsv: from 0.1.0 before 0.26.2.

    Other Web app Lud Jsv

    2.1 LOW 0.2% exploit odds Fix listed
  40. CVE-2026-99161

    In the Linux kernel, the following vulnerability has been resolved: i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe() In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any subsequent operation fails or when the module is unloaded, the clock reference count is never decremented via clk_put(), leading to a resource leak. Switch to devm_clk_get() so that the clock is automatically managed and released.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-84610

    A file quarantine bypass was addressed with additional checks. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A maliciously crafted ZIP archive may bypass Gatekeeper checks.

    Other OS & kernel Apple macOS

    5.5 MEDIUM 0.2% exploit odds Fix listed
  42. CVE-2026-64789

    This issue was addressed with improved validation of file attributes. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A malicious application may bypass Gatekeeper checks.

    Other OS & kernel Apple macOS

    5.5 MEDIUM 0.2% exploit odds Fix listed
  43. CVE-2026-99058

    In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in chained work check current_wq_worker() only tells us that %current is a kworker. It does not guarantee that the worker is currently executing a work item, as worker->current_pwq is populated only while process_one_work() is running the work function. is_chained_work() can be reached while queueing on a draining or destroying workqueue. If a kworker outside work-item execution reaches that path, current_wq_worker() returns a worker but worker->current_pwq is NULL, and the chained-work test can fault before it emits the intended warning. Guard the chained-work test with worker->current_pwq. A kworker without current_pwq is not executing work on the target workqueue, so the helper should return false and let the draining/destroying warning fire.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-99040

    In the Linux kernel, the following vulnerability has been resolved: KEYS: Fix add_key() race with keyring restriction __key_create_or_update() snapshots keyring->restrict_link before taking the destination keyring's semaphore. keyring_restrict() installs a restriction while holding that semaphore. This allows a writer to observe no restriction, wait for the keyring owner to install a reject-all restriction and return successfully, and then link a key using the stale NULL snapshot. The writer only needs write permission on the destination keyring. Move the restrict_link read after __key_link_lock() and __key_link_begin(). The read and the subsequent restriction check are then serialized with restriction installation by keyring->sem. The race was reproduced on v7.2.8 in 19 executions where restriction installation returned before the link completed. All 19 linked the key despite the reject-all restriction. With this change, 312 executions reached the same ordering and every add_key() call failed with -EPERM. The issue was found by manual concurrency analysis assisted by AI-based analysis and independently verified with a QEMU reproducer and kernel instrumentation.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-122141

    The wallet top-up functionality in ICRTouch ByTable and TouchTakeaway does not adequately protect state-changing requests against CSRF. An attacker-controlled website can cause an authenticated customer’s browser to submit a wallet top-up request and add an attacker-selected charge to the customer’s active cart.

    Other Web app

    8.1 HIGH 0.2% exploit odds No fix listed
  46. CVE-2026-128044

    OpenMage magento-lts before 20.18.2 and 21.x before 21.0.0-beta3 validates OAuth 1.0a oauth_callback URLs with a string-prefix check and falls back to accepting any well-formed URL. Attackers holding a leaked consumer key and secret can supply host-suffix, userinfo, or arbitrary callback URLs to capture an approving administrator's or customer's request token and verifier, then obtain an access token with the victim's API privileges.

    Other Web app

    8.7 HIGH 0.2% exploit odds Fix listed
  47. CVE-2026-110951

    Weak Password Recovery Mechanism for Forgotten Password vulnerability in Hyper Teknoloji Ltd. Şti. Hyper E-Commerce Infrastructure, Hyper Teknoloji Ltd. Şti. Hyper E-Commerce Infrastructure - dealer integration, and Hyper Teknoloji Ltd. Şti. Hyper E-Commerce Infrastructure - Storefront application and management panel allows Password Recovery Exploitation. This issue affects Hyper E-Commerce Infrastructure: before 1.1; Hyper E-Commerce Infrastructure - dealer integration: before 1.2; Hyper E-Commerce Infrastructure - Storefront application and management panel: before 2.1796.

    Other Web app

    7.5 HIGH 0.2% exploit odds No fix listed
  48. CVE-2026-116246

    To pass a server's password to psql and to the utilities pgAdmin 4 runs as background processes, the server manager wrote it into pgAdmin's own process environment: as PGPASSWORD for the PSQL tool, and under a per-process variable for a utility. Nothing removed it afterwards. pgAdmin's environment is shared by every user's requests and copied into every process it starts, so in server mode another user's later PSQL session or utility inherited the password, and libpq used PGPASSWORD for any connection made without a password of its own, letting one user connect with another user's saved password. The fix puts the password only into the environment built for the process that needs it and starts psql with a copy of pgAdmin's environment instead of the environment itself. This issue affects pgAdmin 4: before 9.19.

    Other Server Pgadmin 4

    7.0 HIGH 0.2% exploit odds Fix listed
  49. CVE-2026-98925

    In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict program redirects an skb back to the same socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply() calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the skb is then delivered to the socket's psock ingress queue and later read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via the copied_from_self accounting path. This double-counting causes copied_seq to advance by 2x the actual data length, triggering: TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \ rcvnxt BF2E806, fl 0 WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640 Call Trace: tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806 WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0 Call Trace: tcp_recvmsg_locked+0x8d1/0x2640 tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by converting self-redirect verdict to __SK_PASS at the beginning of sk_psock_verdict_apply(). This bypasses the __SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting the __SK_PASS path queue the skb to the psock ingress queue. The data is then read via tcp_bpf_recvmsg_parser(), which advances copied_seq exactly once through copied_from_self. Cross-socket redirects continue through __SK_REDIRECT with sk_psock_eat_skb() unchanged.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-112212

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.3 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, under certain conditions, an unauthenticated user could have poisoned a shared cache's OAuth/OIDC discovery document to redirect certain flows to an externally controlled server, due to improper trust of user-supplied values when constructing endpoint URLs in cached discovery responses.

    Other Web app GitLab

    7.5 HIGH 0.2% exploit odds Fix listed

A list of CVEs whose flaw type is other, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.