Other CVEs.
Published CVEs classified as other, ranked by exploit odds.
-
CVE-2026-96088
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Connected User Experiences and Telemetry allows an authorized attacker to elevate privileges locally.
-
CVE-2026-96075
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Feedback Hub allows an authorized attacker to elevate privileges locally.
-
CVE-2026-96019
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Installer allows an authorized attacker to elevate privileges locally.
-
CVE-2026-112434
A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to gain root privileges.
-
CVE-2026-99254
In the Linux kernel, the following vulnerability has been resolved: io_uring: don't flood a cancelling task with task_work io_ring_exit_work() asks each task which has used the ring to remove its tctx node, by task_work, and repeats that until the list is empty. io_tctx_exit_cb() doesn't touch the node while the task is in io_uring_cancel_generic(), which removes all the nodes at its end. So the work item queues the callback again as soon as it has completed, for nothing. That is more than a waste of time. task_work_run() only returns when it finds the list empty. If the rings are released from inside the cancellation, because requests of other rings held the last references to their files, up to 64 work items keep sending callbacks to the one task which is running them. It never finds the list empty, never gets back to the cancellation, the nodes stay, and so it goes on: a task with 60 pairs of rings which poll each other ran 280000 callbacks in 5 seconds, 20 seconds after exit_group(). It ends when all the senders happen to be late at the same time. Until then the task keeps a CPU and the work items busy. An exiting task can't be killed meanwhile. execve() cancels the requests in the same way, so a live task can get stuck there as well, for minutes. If it takes more than five, the work items run into the WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No privilege is needed for any of this. If the callback has met a task in cancellation, wait a little before it is sent again. Nobody has to wake the work item up for that: either the node is gone by then, or it is the turn of the next round.
-
CVE-2026-99255
In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't hide a link from cancellations A task that exits cancels its tracked requests and waits until they are gone. io_uring_cancel_generic() looks everywhere a request can be, and goes to sleep if it found nothing to cancel. It is woken up each time one of the requests of the task is completed by task work or freed. When io-wq is done with a request that has a link, there is a time in which the next request of the link can't be found: io_worker_handle_work() io_assign_current_work(worker, NULL) io_wq_free_work(work) io_req_find_next() // takes the link off the request io_free_req() // task work for the task io_assign_current_work(worker, linked) io_run_task_work() cond_resched() worker->cur_work = linked It is not pending, it is not the current work of a worker, and it is not yet on the list that it is about to be parked on. If the pass that the exiting task makes because of io_free_req() falls into that time, it finds nothing and the task goes to sleep. The worker then runs the link, which IO_WQ_BIT_EXIT doesn't prevent for bounded work. If that parks the request nothing is completed or freed, and nobody wakes up the task. If it is the process that exits it can't be killed any more either. NOP, IOSQE_ASYNC | IOSQE_IO_LINK FUTEX_WAIT, FUTEX2_PRIVATE exit of the thread, or of the process, up to 63us later With four of these per round 5 to 8 of 10,000 rounds hang (4 CPUs, KVM): io_uring_cancel_generic do_exit Commit f8b632e89a10 ("io_uring: tighten task exit cancellations") is about the same gap, and makes the task look again for whatever happens before io_free_req(). Free the request once the link is the current work of the worker, or pending. Whoever is woken up by that can find the link, until it is parked where cancellations look as well. To do so split io_wq_free_work() in two.
-
CVE-2026-99244
In the Linux kernel, the following vulnerability has been resolved: pid_namespace: prevent TIF_NOTIFY_SIGNAL from interrupting the reaper Since commit 7fea700e04bd ("zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") zap_pid_ns_processes() clears TIF_NOTIFY_SIGNAL before every kernel_wait4() call. Otherwise kernel_wait4() doesn't sleep and returns -ERESTARTSYS if signal_pending() is true and the reaper busy-waits. But clearing TIF_NOTIFY_SIGNAL doesn't fix it. It can get raised again. For example, klp_send_signals() sets it raw against any task that hasn't transitioned yet. And it keeps sending it until the livepatch finishes. The sleep loop waiting for pid_allocated to drop has the same problem and it doesn't even clear anything. So a schedule() in TASK_INTERRUPTIBLE returns immediately. Use a no_notify_signal guard. signal_pending() will ignore TIF_NOTIFY_SIGNAL and the pid namespace reaper sleeps until a child exits or free_pid() wakes it.
-
CVE-2026-99181
In the Linux kernel, the following vulnerability has been resolved: autofs: ignore notification errors from a replaced pipe autofs_notify_daemon() takes a reference to the current notification pipe under wq_mutex, then drops the mutex before writing the request. The write can block while the daemon enters catatonic mode and installs a replacement pipe. If the old pipe's reader is then closed, the delayed write returns -EPIPE and the generic error path enters catatonic mode again. That transition acts on the current superblock state, closes the replacement pipe, and releases the new daemon generation's wait queues. Only enter catatonic mode when the pipe which failed is still the current pipe. Factor the already-locked transition so the identity check and state change are atomic with respect to another replacement. This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest. An unprivileged UID 65534 lookup filled the old packet pipe before a normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe received HUP and both a pending victim lookup and a later lookup failed with ENOENT in two out of two fresh-mount runs. With this change, the new pipe remained active, received an intact 304-byte request, and both victim lookups completed in two out of two runs. Normal lookup and restart-without-a-blocked-writer controls passed. No KASAN, oops, refcount, or lock diagnostic was observed. A source reproducer and complete local logs are available privately on request. The demonstrated impact is limited to denial of a shared autofs service during a legitimate daemon restart. No memory corruption, information leak, privilege escalation, or code execution primitive was observed.
-
CVE-2026-86936
A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to gain root privileges.
-
CVE-2026-121717
fzf is a command-line fuzzy finder. Prior to 0.74.5, trigger-driven zsh completion in shell/completion.zsh uses _fzf_feed_fifo to create a FIFO at the predictable shared path ${TMPDIR:-/tmp}/fzf-complete-fifo-$$ and continues after removal or creation errors. On a multi-user host, a local attacker can pre-create that path as a symlink so the victim's completion stream overwrites a victim-writable file, potentially enabling code execution when that file is later sourced. A pre-created FIFO can instead disclose a bounded stream of completion candidates or block completion. On default modern hosts, fs.protected_symlinks blocks the overwrite variant, and protected_fifos and protected_regular further limit the FIFO disclosure and blocking variants, so exploitation depends on the relevant kernel protections being disabled and on the victim invoking the affected completion. This issue is fixed in version 0.74.5.
-
CVE-2026-99005
In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Unmask interrupts only when ACTIVE is true There is a small race window between intel_rps_boost() reading a stale ACTIVE state and queuing rps->work, where ACTIVE may be changed via asynchronous calls triggered by wakeref drop. This means that rps_work() could be triggered after the GT has been parked, so unmasking RPS PM interrupts would happen without holding PM wakelock. This sequence of events may be observed during live_rc6_ctx_wa() selftest: 1) live_rc6_ctx_wa() -> intel_engine_pm_put() -> wakeref_put() ASYNC1) wakeref_put() callback -> __engine_park() -> intel_gt_pm_put_async() -> intel_gt_pm_put_async_untracked() -> intel_wakeref_put_async() ASYNC2) wakeref_put_async() callback -> __gt_park() -> intel_rps_park() -> intel_rps_clear_active() [clear ACTIVE] WITH INTERRUPTS: -> rps_disable_interrupts() -> cancel_work_sync(rps->work) -> rps_reset_interrupts() [rps->pm_iir = 0] WITHOUT INTERRUPTS (TIMER mode): -> rps_stop_timer() -> cancel_work_sync(rps->work) 2) live_rc6_ctx_wa() -> intel_gt_wait_for_idle() -> intel_gt_retire_requests_timeout() -> dma_fence_wait_timeout() -> ops->wait() [i915_fence_wait()] -> i915_request_wait_timeout() -> intel_rps_boost() -> intel_rps_is_active() [check ACTIVE] [OPEN RACE WINDOW] -> queue_work(rps->work) -> retire_requests() -> i915_request_retire() -> intel_rps_dec_waiters() [from 1 to 0] If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW], then: 3) rps_work() executes from the workqueue and may satisfy "(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir is zeroed by an earlier rps_work() call or never gets a new value after previous intel_rps_unpark() event), so it jumps to "out" label, bypassing intel_rps_is_active() guard and executes gen6_gt_pm_unmask_irq(); 4) GT is parked and runtime PM wakelock is dropped, so only a raw reference in __gt_park() -> intel_display_power_put_async() remains for 100ms, then the MMIO write in gen6_gt_pm_unmask_irq() detects missing wakelock via assert_rpm_wakelock_held() and emits "RPM wakelock ref not held during HW access" tainting kernel. Commit 3e7abf814193 ("drm/i915: Extract GT render power state management") dropped the "if (rps->interrupts_enabled)" guard that gen6_pm_rps_work() had around this unmask in i915_irq.c. INTEL_RPS_ACTIVE brackets the same window, since it is set in intel_rps_unpark() before rps_enable_interrupts() and rps_start_timer() and cleared in intel_rps_park() before rps_stop_timer() and rps_disable_interrupts(). Skip unmasking when RPS is no longer active (reaching unmask operation is independent of INTERRUPT mode). This does not prevent RPS operation from resuming on the next unpark. In interrupt mode, intel_rps_unpark() calls rps_enable_interrupts(), which enables and unmasks the PM interrupts. In timer mode, it calls rps_start_timer(), restarting periodic engine-busyness evaluation. The timer generates software RPS events and queues rps_work() directly, independently of PM interrupt delivery. Neither mode requires the late worker to unmask interrupts while the GT is parked (cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206)
-
CVE-2026-99258
In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Avoid using per-cpu output page in hv_apicid_to_vp_index() hv_apicid_to_vp_index() currently uses the per-cpu hypercall input and output pages. This function is called when running in VTL2 and when running in an SEV-SNP CoCo VM with no paravisor. In the former case, the output page is allocated, but in the latter case it is not, so the hypervisor stores the output VP index in memory that has not been allocated by the guest. Fix this by using the input page for both input and output. The hypercall has very small input and output, so sharing the same page for both is straightforward. An alternative fix is to allocate the per-cpu output page when running in an SEV-SNP CoCo guest, but this uses significantly more memory, particularly with larger vCPUs counts.
-
CVE-2026-118581
A BSON encoding component of the MongoDB Java Driver does not verify that an externally supplied raw document's self-declared length agrees with the extent of the byte range it is given before that range is copied into an outgoing database command. An application that wraps untrusted raw bytes in such a document and uses it as part of a command can therefore emit a structurally inconsistent message, causing the database to interpret attacker-supplied trailing content as additional fields of the surrounding command. No authentication to the driver or database is required beyond the ability to influence those bytes through the victim application, and no user interaction is needed. The result is unintended modification of the command actually executed, which can alter the data read or written under the application's credentials.
-
CVE-2026-98894
In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: reset CPER ring on corrupt entry size When CPER ring overflow handling advances the read pointer, it trusts the parsed entry size from the current ring contents. Corrupt CPER data can produce an entry size that does not advance rptr after dword conversion and pointer masking. In that case the recovery loop keeps testing the same location while holding the CPER ring mutex. This can hang the worker that is writing the next CPER record. Detect a no-progress rptr update and reset the CPER ring to an empty state instead. This drops the corrupt contents and lets the writer leave the recovery path without spinning.
-
CVE-2026-98897
In the Linux kernel, the following vulnerability has been resolved: ksmbd: don't hold ci->m_lock while waiting for a lease break ack When a cifs.ko client caches a read-handle (RH) lease via deferred close and a conflicting open arrives, ksmbd breaks the lease and waits for the acknowledgment in wait_for_break_ack() for up to OPLOCK_WAIT_TIME (35s). __smb_break_all_levII_oplock() runs that wait while holding ci->m_lock for read. cifs.ko reacts to a handle-lease break by closing the deferred handle rather than sending a lease break acknowledgment. That close path (close_id_del_oplock() -> opinfo_del()) takes ci->m_lock for write and is exactly what would wake the waiter, but it blocks on the read lock held by the waiting thread. The break is then resolved only by the 35s timeout, so xfstests generic/001 takes ~78s with leases enabled versus ~4s with oplocks only. Collect the target opinfos (each pinned with a reference) while holding ci->m_lock, then break them after releasing it, matching how smb_grant_oplock() already breaks a conflicting lease using only a reference. The reference keeps the opinfo (and its conn and lease) alive across the unlocked window, and a close racing the break is handled by the existing OPLOCK_CLOSING state check. Apply the same fix to the parent lease break paths.
-
CVE-2026-98878
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when injecting a physical interrupt into a guest VM in software. The GICv5 driver has so far done the priority drop as part of irq_eoi(), i.e., at the same time as deactivating the interrupt. This means that any long running process (or VM) could block incoming interrupts, effectively causing a denial of service for all other interrupts. Rather than doing the EOI as part of irq_eoi() (which the name would suggest would be a good place for it), move it to happen immediately after acknowledging an interrupt in the main GICv5 interrupt handler. The deactivation of interrupts (GIC CDDI) remains implemented as part of irq_eoi(), which means that the same interrupt cannot be signalled a second time until deactivated by software.
-
CVE-2026-98874
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect Clearly, from a user perspective, it must be valid to configure WoWLAN and then suspend while not connected to a network. Since mac80211 doesn't distinguish these cases and simply calls the driver to suspend whenever WoWLAN is configured, the driver has to cleanly handle the case where it's called for WoWLAN, it's not connected but there's also no netdetect configured. Remove the WARN_ON() and keep returning 1 to disconnect and then suspend.
-
CVE-2026-99161
In the Linux kernel, the following vulnerability has been resolved: i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe() In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any subsequent operation fails or when the module is unloaded, the clock reference count is never decremented via clk_put(), leading to a resource leak. Switch to devm_clk_get() so that the clock is automatically managed and released.
-
CVE-2026-84610
A file quarantine bypass was addressed with additional checks. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A maliciously crafted ZIP archive may bypass Gatekeeper checks.
-
CVE-2026-64789
This issue was addressed with improved validation of file attributes. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A malicious application may bypass Gatekeeper checks.
-
CVE-2026-99058
In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in chained work check current_wq_worker() only tells us that %current is a kworker. It does not guarantee that the worker is currently executing a work item, as worker->current_pwq is populated only while process_one_work() is running the work function. is_chained_work() can be reached while queueing on a draining or destroying workqueue. If a kworker outside work-item execution reaches that path, current_wq_worker() returns a worker but worker->current_pwq is NULL, and the chained-work test can fault before it emits the intended warning. Guard the chained-work test with worker->current_pwq. A kworker without current_pwq is not executing work on the target workqueue, so the helper should return false and let the draining/destroying warning fire.
-
CVE-2026-99040
In the Linux kernel, the following vulnerability has been resolved: KEYS: Fix add_key() race with keyring restriction __key_create_or_update() snapshots keyring->restrict_link before taking the destination keyring's semaphore. keyring_restrict() installs a restriction while holding that semaphore. This allows a writer to observe no restriction, wait for the keyring owner to install a reject-all restriction and return successfully, and then link a key using the stale NULL snapshot. The writer only needs write permission on the destination keyring. Move the restrict_link read after __key_link_lock() and __key_link_begin(). The read and the subsequent restriction check are then serialized with restriction installation by keyring->sem. The race was reproduced on v7.2.8 in 19 executions where restriction installation returned before the link completed. All 19 linked the key despite the reject-all restriction. With this change, 312 executions reached the same ordering and every add_key() call failed with -EPERM. The issue was found by manual concurrency analysis assisted by AI-based analysis and independently verified with a QEMU reproducer and kernel instrumentation.
-
CVE-2026-98925
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict program redirects an skb back to the same socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply() calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the skb is then delivered to the socket's psock ingress queue and later read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via the copied_from_self accounting path. This double-counting causes copied_seq to advance by 2x the actual data length, triggering: TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \ rcvnxt BF2E806, fl 0 WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640 Call Trace: tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806 WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0 Call Trace: tcp_recvmsg_locked+0x8d1/0x2640 tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by converting self-redirect verdict to __SK_PASS at the beginning of sk_psock_verdict_apply(). This bypasses the __SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting the __SK_PASS path queue the skb to the psock ingress queue. The data is then read via tcp_bpf_recvmsg_parser(), which advances copied_seq exactly once through copied_from_self. Cross-socket redirects continue through __SK_REDIRECT with sk_psock_eat_skb() unchanged.
-
CVE-2026-99253
In the Linux kernel, the following vulnerability has been resolved: io_uring/cancel: rearm local work wake up before sleep io_uring_try_cancel_requests() sets ->cq_wait_nr to 1 so that the next io_req_local_work_add() wakes the cancelling task. The add that takes the count to zero is the only one that wakes, later ones see a count <= 0 and return. io_uring_cancel_generic() however only becomes TASK_INTERRUPTIBLE much later, so the one wake up can be spent on a running task. That is fine as long as the entry of that add is still queued, as the io_local_work_pending() check then skips the sleep. It is not if the add was delayed after queueing its entry: CPU0 (submitter in exec or exit) CPU1 (io_req_local_work_add) mpscq_push(req A) io_uring_try_cancel_requests() io_run_local_work() // runs req A io_uring_try_cancel_requests() atomic_set(&ctx->cq_wait_nr, 1) atomic_read(&ctx->cq_wait_nr) == 1 count taken, wake_up_state() // task is running, no-op prepare_to_wait(TASK_INTERRUPTIBLE) io_local_work_pending() == false schedule() mpscq_push(req B) cq_wait_nr <= 0, return Only the sleeping task can run req B, so it is stuck in execve() until a signal happens to wake it. An exiting task doesn't even get that. Arm the count again once the task state is set and before the work list is checked, for the rings whose local work this task is the one to run.
-
CVE-2026-99075
In the Linux kernel, the following vulnerability has been resolved: rust_binder: reschedule node refcount update on thread exit When a thread exits via BINDER_THREAD_EXIT, its pending work items are cancelled. If a thread exits while holding a pending node refcount increment (e.g. pushed as deferred work to that thread), the refcount increment was previously dropped because Node::cancel() and NodeWrapper::cancel() were no-ops. Dropping the refcount update leaves the node's delivery state and count state desynchronized, and userspace will not receive the notification, which can cause the node to never be freed from the process's nodes tree when all external references are dropped. Fix this by implementing DeliverToRead::cancel() for Node and NodeWrapper to move the pending refcount update to the process's work queue on thread exit so another thread can deliver it to userspace.
-
CVE-2026-98930
In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix IRQ injection with SIGP Stop and Store Status When __inject_sigp_stop() is called for a Stop and Store Status operation, if the vCPU is running, the interrupt is marked as pending and the status is stored by the thread performing the KVM_RUN IOCTL. If the vCPU is already stopped, the status is stored immediately. Storing the status means writing into userspace, which might fault, and __inject_sigp_stop() is called from do_inject_vcpu() which in turn is always called holding a spinlock, which is obviously an issue. Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and adding a bool flag to indicate whether a store status is needed. The callers of do_inject_vcpu() are modified to pass the pointer to the bool flag; whenever a Store Status operation is needed, the callers can now perform it outside the spinlock. Opportunistically refactor kvm_s390_set_irq_state() to use scoped_guard() and __free(). [ Added Fixes tag while picking -- Claudio ]
-
CVE-2026-65368
A logic issue was addressed with improved validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A maliciously crafted disk image may bypass Gatekeeper checks.
-
CVE-2026-98909
In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: unregister devlink on port registration failure cpsw_probe() registers devlink before registering the CPSW ports. If cpsw_register_ports() fails, the error path only unregisters the notifiers and then releases the lower level resources. It does not undo the successful cpsw_register_devlink() call, leaving the devlink instance and its parameters registered after probe has failed. Add a devlink cleanup label for the path where devlink registration has already succeeded, and use it when port registration fails.
-
CVE-2026-98912
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Reject reads that cannot fit the next event snd_seq_oss_read() checks whether the next queued OSS sequencer event fits in the remaining userspace buffer before removing it from the read queue. The check is inverted. It currently stops when the event is smaller than the remaining buffer, so a normal 4-byte event is not copied for an 8-byte read buffer. Conversely, an 8-byte event can be copied for a smaller read count. Break only when the remaining userspace buffer is smaller than the next event, and report -EINVAL if no complete event has been copied. This prevents an undersized read from looking like end-of-file while leaving the event queued for a later read with a large enough buffer.
-
CVE-2026-98892
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate BASE_ERROR_EVENT payload size BASE_ERROR_EVENT carries a variable number of message reports, with the count encoded in error_status. The notification parser used that count without checking whether the received payload contained all reported entries. Reject truncated payloads before copying the report array.
-
CVE-2026-98896
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Keep the domain reference while processing hotplug We process hotplug events in a workqueue that may run after the domain has been removed by tb_domain_remove(). For example if user unloads the driver while at the same time plugging a device router we may have scheduled tb_handle_hotplug() to run. Avoid possible UAF in this case by taking the domain reference before scheduling the hotplug handler in tb_queue_hotplug().
-
CVE-2026-98886
In the Linux kernel, the following vulnerability has been resolved: drm/gma500: return errors from Oaktrail HDMI I2C reads xfer_read() waits for the HDMI I2C transaction to reach I2C_TRANSACTION_DONE, but it ignores both timeout and signal returns from wait_for_completion_interruptible_timeout(). If the interrupt never advances the transaction state, the loop can wait forever. Return -ETIMEDOUT when the completion wait expires, propagate interrupted waits, and make the I2C master_xfer callback return the first transfer error instead of reporting a successful message count.
-
CVE-2026-98888
In the Linux kernel, the following vulnerability has been resolved: arm64: kprobes: Allow reentering kprobes while single-stepping A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This can happen when tracing or perf code runs from the debug exception path while the first kprobe is preparing or executing its out-of-line single-step instruction. Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable, the same as a hit in KPROBE_REENTER. This is too strict. A hit in KPROBE_HIT_SS is still a one-level reentry and can be handled by saving the current kprobe state and setting up single-step for the new probe, just like reentry from KPROBE_HIT_ACTIVE or KPROBE_HIT_SSDONE. The truly unrecoverable case is hitting another kprobe while already in KPROBE_REENTER, because the reentry save area has already been consumed. Move KPROBE_HIT_SS to the recoverable reentry cases and leave KPROBE_REENTER as the unrecoverable nested reentry case. This change also requires saving saved_irqflag in struct prev_kprobe. When a nested kprobe calls kprobes_save_local_irqflag(), it overwrites kcb->saved_irqflag with the currently masked DAIF value, losing the outer kprobe's original DAIF state. Without this fix, when the outer kprobe's single-step finishes, kprobes_restore_local_irqflag() applies the wrong DAIF mask and leaves interrupts permanently disabled. Extend struct prev_kprobe with a saved_irqflag field and save/restore it alongside kp and status. This ensures the outer kprobe's original interrupt state is preserved across reentry. This mirrors the x86 fix in commit 6a5022a56ac3 ("kprobes/x86: Allow to handle reentered kprobe on single-stepping").
-
CVE-2026-98890
In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: reject short monitor TX frames In monitor mode, lbs_hard_start_xmit() casts skb->data to a radiotap TX header, skips that header, and then copies the 802.11 destination address from offset 4 in the remaining frame. The generic length check only rejects zero-length and oversized skbs, so a short monitor frame can be read past the end of the skb data. Require enough bytes for the radiotap TX header and the destination address field before using the monitor-mode header layout.
-
CVE-2026-56919
In PackageSignatureChecker of SystemUIGoogleModule.java, there is a possible background activity launch due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.
-
CVE-2026-112530
A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to gain root privileges.
-
CVE-2026-112534
This issue was addressed with improved access restrictions. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to bypass sandbox restrictions.
-
CVE-2026-99128
In the Linux kernel, the following vulnerability has been resolved: sctp: validate chunk length in the inqueue parser SCTP chunks always include a four-byte generic header, but sctp_inq_pop() currently accepts shorter declared lengths. A zero-length chunk leaves chunk_end at the current header. When ASCONF is covered by the association's SCTP-AUTH policy, sctp_assoc_bh_rcv() can continue before the state machine performs its normal chunk-length check. sctp_inq_pop() then returns the same malformed chunk repeatedly and the receive softirq can lock up. A remote SCTP peer can trigger this after establishing an association on a kernel built with CONFIG_IP_SCTP and configured with net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did not require application credentials, a shared SCTP AUTH key, or net.sctp.addip_noauth_enable=1. On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"), one zero-length ASCONF caused repeated watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger health probes succeeded, while 36 of 37 post-trigger probes failed. With this change, all 37 post-trigger probes succeeded and no equivalent soft-lockup signature appeared. Reject chunks shorter than the generic SCTP header at the shared inqueue parser boundary. Mark the packet for discard before either caller can continue processing it, while preserving the four-byte generic minimum. Declared-length 1 through 4 controls and kernel-generated ASCONF traffic remained healthy. The patched sctp_hello selftest passed for IPv4 and IPv6. The complete private reproducer and validation evidence are available directly to maintainers on request.
-
CVE-2026-99118
In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Harden DMC firmware payload parsing Validate the conversion of the DMC firmware size from dwords to bytes using check_mul_overflow() before calculating the firmware payload size. Reject zero-length payloads and zero MMIO counts in the DMC firmware header so malformed firmware is caught early. Also set dmc_fw_size only after the payload allocation succeeds. (cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef)
-
CVE-2026-99121
In the Linux kernel, the following vulnerability has been resolved: ipv4: avoid divide by zero in fib_rebalance fib_rebalance() computes the total eligible nexthop weight in one pass and programs upper bounds in a second pass. A concurrent change to ignore_routes_with_linkdown can make the first pass return zero while the second pass sees an eligible nexthop, resulting in division by zero. If the first pass reports a zero total, set each nexthop upper bound to -1 and skip the division. This matches the IPv6 fix in commit d2c26c2911dd ("ipv6: avoid divide by zero in rt6_multipath_rebalance") and preserves the lock-free rebalance path.
-
CVE-2026-112437
A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to gain root privileges.
-
CVE-2026-99045
In the Linux kernel, the following vulnerability has been resolved: ibmveth: h_free logical LAN on open-fail after register ibmveth_open() registers the logical LAN, then allocates the RX buffer pools. A pool failure jumps to out_free_buffer_pools without h_free_logical_lan(), so PHYP still owns the buffer-list page when it is unmapped. request_irq() failure already issued the hypercall before taking the same label. Move that h_free to the shared post-register unwind so both paths deregister before the buffer list is unmapped.
-
CVE-2026-99033
In the Linux kernel, the following vulnerability has been resolved: net/packet: guard the ll header push in packet_rcv_spkt() packet_rcv_spkt() restores the link layer header with skb_push(skb, skb->data - skb_mac_header(skb)); That subtraction is only meaningful when the device actually has a link layer header. packet_rcv() and tpacket_rcv() both wrap it in dev_has_header(), which is also the predicate the block comment at the top of the file states the restore in terms of; packet_rcv_spkt() does not. commit d549699048b4 ("net/packet: fix packet receive on L3 devices without visible hard header") introduced the helper and changed the two call sites, and this one stayed behind. A device without a visible ll header can leave skb->mac_header at the 0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does: init_can_skb() sets pkt_type and ip_summed but does not reset the headers, and commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure") dropped the skb_reset_*_header() calls that used to be there. skb_mac_header() is then 0xFFFF, the length becomes a large negative number and skb_push() reports it through skb_under_panic() -- from softirq context, so it is a full system panic even with panic_on_oops=0: skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0 kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x50/0x60 Call Trace: <IRQ> skb_push+0x38/0x40 packet_rcv_spkt+0xe1/0x170 __netif_receive_skb_core.constprop.0+0x7e8/0xd30 ... Kernel panic - not syncing: Fatal exception in interrupt The socket type is reachable: packet_create() accepts SOCK_PACKET alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check, and neither the socket length nor a capability check keeps it away from a CAN interface. The missing skb_reset_*_header() calls in init_can_skb() are a regression in their own right and are being fixed separately, but a packet socket should not turn a link layer that did not initialise its mac header into a kernel panic. Guard the push the way the other two receive paths do. Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is the driver RX path: vcan does not reproduce it, because can_send() resets the headers on the way out. One SOCK_PACKET socket bound to can0 and one frame written into the line discipline panics an unpatched kernel with the trace above; the same image with this patch prints no panic and powers off normally. Both kernels are this tree, defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk.
-
CVE-2026-98990
In the Linux kernel, the following vulnerability has been resolved: namespace: check a submount for references right before unmounting it shrink_submounts() and mark_mounts_for_expiry() first collect all the mounts they are allowed to unmount and then unmount them. Whether a mount is busy is decided by propagate_mount_busy() on the tree. But unmounting the first mount changes the tree that the second one propagates into. propagate_umount() moves a surviving overmount off a copy it unmounts and mounts it where the copy was mounted. If that's where the propagated copy of the second victim is looked up the overmount becomes a candidate of the second umount_tree(). It's childless and so trim_one() commits it without looking at its reference count. So a synchronous umount pulls out a busy mount that is in use somewhere else and marks it MNT_SYNC_UMOUNT while it has users: umount2(/tmp/plshrink/p1, 0) = 0 errno 0 cwd is (unreachable) The same two umounts requested one after the other fail with EBUSY. This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts inherit the flag. Check each mount right before it is unmounted under the same hold of namespace_sem and mount_lock as the umount itself. Make sure that the algorithm stays linear.
-
CVE-2026-98967
In the Linux kernel, the following vulnerability has been resolved: cxgb4/ch_ktls: disable softirqs around tid_list erases chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path using xa_insert_bh(). The array is shared by the adapter's connections and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray lock without disabling softirqs. When cleanup runs with softirqs enabled, a receive softirq for another connection on the same CPU can interrupt the erase and spin on the lock held by the interrupted task. Use xa_erase_bh() at both sites to match the insertion path.
-
CVE-2026-98950
In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect() bpf_flow_dissect() sanitizes the offsets returned by the BPF program with clamp_t(u16, ..., hlen). If hlen is bigger than 65535, the upper bound is truncated before the comparison. For instance, with hlen == 65536, both nhoff and thoff are forced to zero, even if the program returned sane values. This is the same class of bug as the one fixed in commit 99bda1ecbd56 ("flow_dissector: avoid u16 truncation of skb->len when computing thoff"). That fix does not cover the BPF path, because __skb_flow_dissect() returns early when a BPF flow dissector handles the packet. struct bpf_flow_keys stores nhoff and thoff as u16, so cap hlen to U16_MAX before clamping. Found by sashiko while reviewing the commit above.
-
CVE-2026-98924
In the Linux kernel, the following vulnerability has been resolved: fs: avoid repeated scans in evict_inodes() We observed hung tasks when users attempted to unmount a filesystem after its disk had been removed while still in use. During device removal, fs_bdev_mark_dead() calls evict_inodes() while holding s_umount. Each time evict_inodes() drops s_inode_list_lock to reschedule, it restarts the walk from the head of s_inodes. With many referenced inodes at the head of the list, these restarts repeatedly scan the same inodes without reclaiming them. This can keep s_umount held for a long time, blocking concurrent umount attempts and triggering hung-task reports. Keep the current inode, already marked I_FREEING, out of the disposal batch until s_inode_list_lock is reacquired. Resume the walk from this inode and dispose of it in a later batch or at the end of the walk. The zero-refcount and state checks under i_lock allow this walker to claim the inode by setting I_FREEING and removing it from the LRU. Other reclaimers skip the inode, leaving this walker responsible for eviction. Only evict() removes it from s_inodes, so keeping it out of the disposal batch ensures that it remains on the list while the lock is dropped. After reacquiring the lock, reading its current next pointer accounts for concurrent removal of following inodes. The existing inode lifetime rules prohibit acquiring a reference to an inode marked I_FREEING or I_WILL_FREE. __iget() requires its caller to hold i_lock and establish that taking a reference is valid. Inode lookup and igrab() check these flags under i_lock when acquiring a reference from zero. ihold() requires an existing reference, which would keep i_count nonzero and prevent this walker from claiming the inode. These rules already allow iput_final() and the inode shrinker to release i_lock after setting I_FREEING and before eviction completes. A temporary __iget() reference would also keep the inode on the list, but its release must preserve last-reference handling. Another user can acquire a reference, update lazy timestamps and drop its reference while the pin is held. If the pin becomes the last reference, dropping it with atomic_dec_and_test() and evicting directly bypasses iput()'s lazytime handling and can lose those timestamp updates. Releasing the pin with iput() preserves that handling, but does not guarantee eviction. fs_bdev_mark_dead() runs with SB_ACTIVE set, so iput() may retain the inode in cache, whereas evict_inodes() must evict eligible zero-reference inodes. The inode may also have been freed when iput() returns, so the walker cannot then use it to force eviction. Using I_FREEING preserves the existing eviction behavior without introducing an additional last-reference transition. The xfstests auto group passed on ext4 and XFS with known unrelated failures excluded. No new issues were observed, and the previously reproducible hung task no longer occurs with this patch.
-
CVE-2026-112917
In Docker Desktop for Windows with the WSL2 backend, an unprivileged Linux container can use 32-bit socketcall to bypass the default seccomp restriction on AF_VSOCK. This can expose host-facing services and Windows files accessible to the logged-in user. The issue affects x86-64 WSL2; LinuxKit-based backends are unaffected. The issue is fully fixed only with Docker Desktop 4.98.0 or later and WSL 3.0.3 or later. Docker Desktop 4.98.0 or later running on an older WSL remains affected.
-
CVE-2026-112668
A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to gain root privileges.
-
CVE-2026-112498
An access issue was addressed with additional sandbox restrictions. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to break out of its sandbox.
A list of CVEs whose flaw type is other, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.