Other CVEs.
Published CVEs classified as other, ranked by exploit odds.
-
CVE-2026-99350
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix update of call->tx_pending without holding lock Currently, rxrpc_send_data() updates call->tx_pending just before it returns - but it won't be holding the call->user_mutex when it does this if a wait was interrupted by a signal. This would allow a parallel sendmsg() to race. Further, both the callers of rxrpc_send_data() call it with the lock held, and then it returns an indication through the parameter list to say whether it has dropped the lock or not - after which the callers both just drop the lock if it's still held. Fix this by: (1) Moving the release of call->user_mutex down into rxrpc_send_data() and get rid of the indicator parameter. This makes it easier to see where the lock is held. (2) After waiting, if the attempt to reacquire the mutex is interrupted, just return directly there rather than going to out_unlock (3) Restricting the txb variable to inside the buffering loop and leaving ->tx_pending set until we've queued the buffer. Note that there's a slight change in behaviour in that wait_for_space failure now doesn't check for completion because it doesn't hold the call user_mutex. The caller, however, should re-issue the send and pick up any error at a second attempt.
-
CVE-2026-99352
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: trace an accepted transport before publishing it svc_handle_xprt() publishes a newly accepted transport before tracing it. svc_add_new_temp_xprt() places the transport on sv_tempsocks and clears XPT_BUSY, so another nfsd thread can dequeue it at once. If the peer has already closed the connection, that thread runs svc_delete_xprt(), which drops the list reference, the only reference the new transport holds. trace_svc_xprt_accept() then reads the transport's addresses and network namespace from freed memory. Before publication the accepting thread owns the transport exclusively: XPT_BUSY is still set from svc_xprt_init() and the transport is on no list. Emit the tracepoint there. [ cel: trace before publication instead of taking an extra reference ]
-
CVE-2026-99354
In the Linux kernel, the following vulnerability has been resolved: sunrpc: pin gss module across auth_domain RCU free A gss auth_domain stores a raw pointer to svcauthops_gss in dom->flavour, and its release queues svcauth_gss_domain_release_rcu() via call_rcu(). Both live in auth_rpcgss.ko text, and nothing pins the module while a domain referencing it is reachable. rmmod auth_rpcgss can therefore unmap that text while an NFSD export still holds a reference to the domain. The export cache is one such holder. When the export is finally released, the domain reference drops from module text: svc_export_put() auth_domain_put(exp->ex_client) auth_domain_release() dom->flavour->domain_release(dom) /* into module text */ svcauth_gss_domain_release() call_rcu(&dom->rcu_head, svcauth_gss_domain_release_rcu) Once auth_rpcgss is unloaded, the domain_release call lands in unmapped memory. The rcu_barrier() in exit_rpcsec_gss() does not help: it waits only for callbacks already queued, and this one is not queued until the export goes away. NFSD's NFSv4 objects import symbols from auth_rpcgss.ko, so only a server built without CONFIG_NFSD_V4 can unload auth_rpcgss while exports still name a gss domain. Take a module reference in svcauth_gss_register_pseudoflavor() before publishing the domain and drop it at the end of svcauth_gss_domain_release_rcu(). The rcu_barrier() then holds the module image until this callback has returned. [ cel: rewrote description ]
-
CVE-2026-99341
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Request event processing for exception VM-Exits Request event processing whenever kvm_queue_exception_vmexit() queues an exception VM-Exit. Most callers reach the helper through kvm_multiple_exception(), which already sets KVM_REQ_EVENT, but nested asynchronous page faults call it directly. Without another event request, vcpu_enter_guest() skips kvm_check_and_inject_events() and re-enters L2. A subsequent VM-Exit can clear the pending exception while reconstructing vectoring state, losing the synthetic #PF VM-Exit. The APF reason remains PAGE_NOT_PRESENT and a later regular #PF can consume the stale value. Setting KVM_REQ_EVENT in the common helper ensures that L1 receives the queued VM-Exit before KVM re-enters L2.
-
CVE-2026-99342
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Enforce 4-byte alignment of vcpu_info registration Xen's map_guest_area() enforces that vcpu_info is aligned to sizeof(xen_ulong_t). KVM has no such check, allowing a guest to register vcpu_info at an arbitrary byte alignment. Enforce unconditional 4-byte alignment regardless of the current shinfo mode. This is sufficient because subsequent commits ensure that all locked atomic operations on vcpu_info fields use at most 32-bit accesses. Return -ENXIO on failure, matching Xen's map_guest_area() behaviour for unaligned requests. Originally observed in review of an unrelated patch: https://lore.kernel.org/all/[email protected]/
-
CVE-2026-99343
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bug the VM if KVM attempts to walk more levels than the MMU has Extend the "EFER.LMA && !CR4.PAE" check, which exists largely to guard against KVM configuring a paging32 MMU with more than 2 levels of paging, with a very explicit check for exactly that: that KVM isn't trying to walk more levels of paging than the MMU template provides. I.e. harden KVM against all bugs that would cause KVM to generates accesses beyond the bounds of guest_walker's arrays, regardless of how KVM ended up with the misconfigured MMU. Note, don't use w->cpu_role.base.level directly as the paging64 template only provides two levels of page tables for PAE paging on 32-bit hosts, and handles the third level by manually emulating the PDPTR access.
-
CVE-2026-99344
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore EFER.LMA if EFER.LME=0 when preparing L2 state Force EFER.LMA=0 if EFER.LME=0 when preparing L2 state for VMRUN, i.e. mimic real hardware's behavior of ignoring EFER.LMA if EFER.LME=0. VMRUN unfortunately allows the nonsensical combination, i.e. doesn't fail, but KVM itself has an invariant EFER.LMA can be set et if and only if EFER.LME is set. Breaking that invariant can lead to a variety of issue, particularly in MMU code that keys off EFER.LMA when determining whether to emulate/virtualization 4/5-level paging versus PAE paging.
-
CVE-2026-99345
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Reject KVM_SET_NESTED_STATE if L1 has EFER.LMA=1 && EFER.LME=0 Reject KVM_SET_NESTED_STATE if the incoming L1 host state has what is effectively an impossible EFER combination of LMA=1 but LME=0, i.e. if the state says long mode is active but not enabled. Unlike VMX, SVM doesn't have an explicit consistent check for the illegal combination; presumably hardware simply ignores EFER.LMA if EFER.LME=0. Unfortunately, KVM doesn't ignore EFER.LMA in this case and consumes the illegal state when constructing the shadow MMU for L2. E.g. if userspace also clears CR4.PAE, then kvm_calc_cpu_role() will compute a role with 4 or 5 levels of paging, but shadow_mmu_init_context() will wire up the MMU to use the paging32 template, which maxes out its levels at 2. Note, the "real badness" is effectively the same as what happened with the nVMX bug fixed by commit 112e66017bff ("KVM: nVMX: add missing consistency checks for CR0 and CR4"). Unfortunately, the sanity check added by commit 72e2fb24a0b0 ("KVM: x86/mmu: Bug the VM if a vCPU ends up in long mode without PAE enabled") doesn't work for this case, since L2 state is active at the time of the page fault, but it's L1 that has the bad state.
-
CVE-2026-99346
In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Trigger new ASID allocation in both VMCBs on pCPU switch When the pCPU where the VMCB was most recently used is switched, reset the ASID generation in both VMCBs, triggering new ASID allocation for the immediate VMRUN as well as the next VMRUN on the other VMCB. The ASID is shared between vmcb01 and vmcb02, and gets flushed on every nested transition. However, since pCPU tracking is done per VMCB, it is possible for one VMCB to allocate a new ASID when migrated to a new pCPU, and then the other VMCB reuses that ASID on the old pCPU. This can result in the same ASID being used by multiple vCPUs on the old pCPU. Example scenario: - vCPU runs on pCPU A, vmcb01 is active, asid=1. - vCPU migrates to pCPU B, vmcb01 pCPU changes, new asid=2. - Another vCPU runs on pCPU A and allocates asid=2 as well. - vCPU migrates back to pCPU A, and then switches to vmcb02 before it runs again with vmcb01. - No pCPU switch is detected for vmcb02, so VMRUN is done with asid=2. - Two vCPUs end up using asid=2 on the same pCPU. Keep the VMCB dirtying to the active VMCB only. Clean bits are tracked by a pCPU for each VMCB, so do not unnecessarily dirty a VMCB if its pCPU does not change. Additionally, initialize the tracked pCPU for vmcb02 to -1 on nested enablement as hardening, so that a new ASID allocation is always triggered when nested is disabled and re-enabled. No performance regression was noticed when overcommitting L1 vCPUs in L0 (to force rescheduling), pinning L1 <-> L2 vCPUs, and running CPUID in a tight loop bouncing between 2 vCPUs in L2. An alternative (and perhaps more proper) fix would be tracking the ASID per-VMCB instead (e.g. [1]). However, that's a more involved change, and it would result in having different ASIDs for L1 and L2 without actually properly maintaining them. It would probably work because all TLB flushes target the current VMCB, and the other VMCB is always flushed on nested transitions, but the code ends up in an arguably more fragile state. Punt a proper clean fix to an incoming (and overdue) overhaul of SVM's ASID usage [2]. [1] https://lore.kernel.org/lkml/[email protected] [2] https://lore.kernel.org/kvm/[email protected]
-
CVE-2026-99333
In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Use report type from request node Use report type from request node while sending feature and input reports to HID core. The cli_data report type array is never assigned and feature reports are sent as input reports.
-
CVE-2026-99334
In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add preempt_disable() around virtual-mode HPTE bit-lock users kvmppc_hv_find_lock_hpte() requires virtual-mode callers to run with preemption disabled, because it can return with HPTE_V_HVLOCK still held until the caller later unlocks the HPTE. Existing virtual-mode callers in book3s_64_mmu_hv.c already follow that rule. Two virtual-mode call paths do not: 1. kvmppc_handle_exit_hv() calls kvmppc_hpte_hv_fault() for hash-mode data-side and instruction-side faults after guest exit, with preemption already enabled. kvmppc_hpte_hv_fault() calls kvmppc_hv_find_lock_hpte() directly. 2. kvmppc_pseries_do_hcall() executes virtual-mode handlers for HPT hcalls via kvmppc_pseries_do_hpt_hcall() with preemption enabled. The handlers for H_ENTER, H_REMOVE, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, and H_BULK_REMOVE spin on try_lock_hpte() or lock_rmap(), and H_ENTER also reaches kvmppc_do_h_enter(), which uses arch_spin_lock() on kvm->mmu_lock. That raw lock choice is intentional because kvmppc_do_h_enter() is also used by real-mode callers, so the correct fix is to establish the proper preemption context at the virtual-mode caller boundary. If a vCPU thread is preempted while holding HPTE_V_HVLOCK, any other thread on the same CPU trying to acquire the same bit-lock can spin indefinitely. The same applies to lock_rmap() users and to the H_ENTER path while holding the raw mmu_lock. Fix this by adding preempt_disable()/preempt_enable() pairs around the two kvmppc_hpte_hv_fault() call sites in kvmppc_handle_exit_hv(), and around the kvmppc_pseries_do_hpt_hcall() invocation in kvmppc_pseries_do_hcall(). Targeting only the HPT hcall helper avoids wrapping non-HPT hcalls (such as H_RTAS, H_CONFER, H_REGISTER_VPA) that perform page faults, blocking memory allocations, or context switches.
-
CVE-2026-99335
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Establish memslot<=>guest_memfd bindings *after* memslot is ready Wait to bind a memslot to a guest_memfd instance until *after* the memslot is fully prepared, as creating the binding in guest_memfd will effectively expose the memslot to readers. As pointed out by Sashiko, binding the memslot before it's ready to be exposed to the rest of the world can break various memslot assumption and rules. E.g. x86 could observe a NULL rmap pointer if a PUNCH_HOLE hit the guest_memfd after the binding was created, but before KVM made it through kvm_prepare_memory_region().
-
CVE-2026-99336
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: take the invalidate lock when unbinding a dying file kvm_gmem_unbind() takes mapping->invalidate_lock only if the get_file_active() succeeds. When the guest_memfd file is dying, its reference count is already zero so get_file_active fails and the binding is removed without holding the invalidate lock. kvm_gmem_invalidate_{start,end}() checks f->bindings independently to decide whether to begin or end KVM MMU invalidation. So, the bindings must therefore remain stable between the two calls. Otherwise, unbind can remove a binding after start increments mmu_invalidate_in_progress, but before end finds the binding and decrements it. Example, unbind race with memory failure: CPU 0: memory failure CPU 1: memslot delete ---------------------------------- --------------------------- (guest_memfd file is dying) kvm_gmem_error_folio() kvm_gmem_invalidate_start() finds binding mmu_invalidate_in_progress++ kvm_gmem_unbind() get_file_active() fails removes binding kvm_gmem_invalidate_end() no binding found counter stays elevated mmu_invalidate_retry() then returns 1 forever, so guest page faults retry without ever installing a mapping and the guest hangs. Remove the distinction between live and dying files in the unbind path. Always use slot->gmem.file and take the invalidate lock when it's non-NULL. Normal unbind callers hold slots_lock, which prevents release from clearing the pointer or freeing the file state until unbind completes. Final VM teardown can only see a NULL pointer because guest_memfd pins the KVM until release has cleared all bindings.
-
CVE-2026-99337
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Bus Lock VM exit Enable Bus Lock VM exit functionality for TDX guests. Bus Lock VM exit is an existing feature supported by KVM. Userspace can enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Bus Lock VM exit for TDX guests by programming the BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler. Note, there is no enumeration bit for this feature by TDX module because all TDX modules support it and allow to set the TD VMCS as long as the hardware supports the feature.
-
CVE-2026-99338
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Notify VM exit Enable Notify VM exit functionality for TDX guests. Notify VM exit is an existing feature supported by KVM. Userspace can enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Notify VM exit for TDX guests by: - Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS bits are set. Since TDX vCPU cannot be reset, it only needs to be configured once when initializing the TDX vCPU. - Adding corresponding exit handler for TDX Notify VM Exit. Notify VM exit can happen when executing the IRET instruction. If the IRET unblocks the NMI blocking state, bit 12 of the exit qualification is set. In this case, the VMM needs to restore the "blocked by NMI" state when it decides to re-enter the guest. For TDX, KVM cannot manage the GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to handle it. Extract the common part without NMI blocking handling into a helper in common.h so that it can be shared between VMX and TDX. Note, KVM uses "pre-production" terminology for the feature formally called Notify VM-Exit. All public versions of the SDM refer to the feature as Instruction Timeout. This will be remedied in the near future, for now, use KVM's terminology for consistency. Note, #2, there is no enumeration bit for Notify VM exit by TDX module because all TDX modules support it, and allow to set the corresponding TD VMCS fields as long as the hardware supports the feature.
-
CVE-2026-99339
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Zero reserved synic flags when delivering message to avoid stack leak Ensure all reserved flags are zeroed when setting the msg_pending flag as part of SynIC message delivery, as setting only msg_pending can leak seven bits of kernel stack data to the guest. E.g. gcc typically uses a bitwise-OR to set the msg_pending flag, without initializing the on-stack variable. Precisely zero the flags, e.g. as opposed to zeroing the entire structure, to make it somewhat more obvious that the flags *need* to be zeroed. E.g. it would be quite easy to misread the initial read of guest memory and think that zeroing the entire structure is completely superfluous.
-
CVE-2026-99325
In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Add suspend function and gate access under bool. Currently a device can suspend while delayed work is pending or executing. Cancel delayed work if it was pending and restart it if it hasn't run yet. Gate access to show/store functions behind a bool to prevent access prior to cfg_setup() being completed.
-
CVE-2026-99326
In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Prevent deadlock if device removed during setup hid_gos_cfg_remove() calls a mutex before canceling delayed work. That delayed work function calls mcu_property_out(), which holds the same mutex. Prevent deadlock my removing the mutex prior to stopping the work. Additionally, since cancel_delayed_work has the potential to re-arm, switch to disable_delayed_work.
-
CVE-2026-99328
In the Linux kernel, the following vulnerability has been resolved: HID: picoLCD: check for fb_deferred_io_init() error fb_deferred_io_init() allocates deferred I/O state, populating info->fbdefio_state, or leaving it NULL if an error occurs. Currently picolcd_init_framebuffer() ignores its return value. Therefore if an error arises in fb_deferred_io_init() (for instance, due to an allocation failure) info->fbdefio_state is left NULL. When the file is subsequently opened, fb_open() will dereference a NULL pointer (calling fb_deferred_io_open()). Fix this by checking for the error. Also correct cleanup ordering - defio is initialised after the sysfs file, so cleanup defio first.
-
CVE-2026-99329
In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: always initialize and cancel init_work The writable gpio_mode_enforce parameter can change between probe and remove. If it changes from false to true after probe, remove skips cancellation of init_work. Pending or running work can then access devm-managed driver state after teardown. Changing it from true to false can make remove cancel an uninitialized delayed work item. Initialize init_work whenever IIO is reachable and cancel it unconditionally on remove. Keep the parameter check only for scheduling the initialization. The false-to-true cancellation gap was previously reported by Sashiko. We also encountered this issue during our static-analysis research.
-
CVE-2026-99331
In the Linux kernel, the following vulnerability has been resolved: HID: cp2112: validate response report lengths The HID core invokes raw_event callbacks before validating the report length. cp2112_raw_event() reads every field of a transfer status response without checking size. For a data response, it reads the length at offset two and copies that many bytes from offset three, again without ensuring that the input report contains them. Require a complete transfer status structure. For data responses, first require the header and then ensure the clamped payload length fits in the received report before copying it. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus.
-
CVE-2026-99321
In the Linux kernel, the following vulnerability has been resolved: rust_binder: wake epoll on self-work queued to poll thread When a thread pushes work to its own todo list, InnerThread::push_work() returns PushWorkRes::OkNotifyPoll if the thread uses epoll, but four call sites in thread.rs discard this return value. As a result, a non-blocking BC_* write that enqueues work onto the calling thread's todo list without also reading will not wake epoll. Check the return value and call self.process.notify_poll(false) when PushWorkRes::OkNotifyPoll is returned. This is similar to commit 97830f3c3088 ("binder: signal epoll threads of self-work"), but in C Binder pending thread work also prevented subsequent process work from waking epoll, causing a permanent hang, which is not the case in Rust Binder. This means that in practice, it merely delays notifications rather than completely failing to send them.
-
CVE-2026-99322
In the Linux kernel, the following vulnerability has been resolved: ksmbd: rebind completed CREATE replays without draining the old channel A completed DurableHandleReqV2 CREATE can be replayed through another channel while its original channel is exiting. The existing replay path returns the open but leaves its connection and oplock references pointing at the old channel. Its open count also stays on that channel, and a later CLOSE through the surviving channel decrements the wrong counter. After checking the owner, lease key and persistent flag, verify that an active open is still published in the requesting session's file table. Do this even when no oplock was granted, and before processing a consumed replay. Do not read a borrowed opinfo session pointer for this check. Keep a healthy original binding. If the original channel is exiting or releasing, move the open and its own oplock references to the requesting channel. Serialize this with CLOSE using the session file-table lock, and with detach, reconnect and notification snapshots using m_lock. The earlier lock index and lease-table changes make their lifetimes independent of this connection change. No old-channel r_count wait is needed, including when an unrelated request remains active there. Account final close against fp->conn in one place, balance durable detach and reconnect, and transfer the count with a replay binding change. A final global lookup put may run after CLOSE has removed the volatile id; unlink the open from the inode list on that final close as well. A live completed CREATE replay may follow a break that lowered the durable open's batch oplock. Apply the batch eligibility check only to detached reconnects, while retaining the owner, lease key and persistent flag checks for active replays.
-
CVE-2026-99319
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Refuse a retried DSP load after a failure snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and the interrupt URB when the FPGA firmware image with index 1 is loaded, and then creates the ALSA devices. If usx2y_in04_init() or usx2y_create_alsa_devices() fails, the URBs that were already set up are left in place. The core keeps the index unloaded when the callback fails, so user space may issue the same request again. The second attempt then enters usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still allocated and trips WARN_ON(usx2y->as04.buffer) or WARN_ON(usx2y->in04_urb). The URBs cannot be released at this point: the card may already have registered PCM devices that user space can still open, and the disconnect handler accesses the URBs without holding the DSP lock. Mark the chip as hung instead, so that a retried request is refused with -ENODEV and the assertions keep their meaning. The URBs are released by snd_usx2y_card_private_free() when the card is freed. A failing usx2y_async_seq04_init() still releases its own URBs, so that path remains retryable.
-
CVE-2026-99312
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally reset MMU context when emulating INIT Force an MMU reset when emulating an INIT even if paging was already disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU context. Alternatively, the reset could be scoped strictly to paging being enabled or L2 being active, but SMM is also encoded in the page role. Even though it _should_ be impossible for the vCPU to be INIT'd while SMM is active, there's zero value in not handling SMM. At that point, the only scenario where KVM _doesn't_ need to reset the MMU context is on an INIT with the vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those modes is somewhat common, it's far from a hot path and re-initializing the MMU is not expensive, especially when the role isn't changing (KVM elides most of the re-configuration in that case). Note, like the Fixes commit, this bug only affects nested SVM as INIT is an unconditional intercept on VMX, i.e. it's impossible to emulate INIT while L2 is active. Temporarily keep the guest TLB flush when CR0.PG is being cleared even though it is fully redundant with the flush that is emitted on all INIT events (KVM itself only does RESET when a vCPU is being created, i.e. when CR0.PG must be '0').
-
CVE-2026-99315
In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Fix NULL dereference at hwdep open and release usb_stream_hwdep_open() and usb_stream_hwdep_release() pass the result of usb_ifnum_to_if() straight to usb_autopm_get_interface() and usb_autopm_put_interface(), without checking it for NULL. usb_ifnum_to_if() returns NULL once the device is gone, since usb_disable_device() clears udev->actconfig on disconnect. The hwdep file can outlive the disconnect: the card is released with snd_card_free_when_closed(), so a process that keeps the character device open reaches the driver's release callback after the USB configuration has been dropped, and interface_to_usbdev() then dereferences the NULL interface at offsetof(struct device, parent). The open callback has the same problem when it races with the disconnect. Check both lookups and fail the open with -ENODEV; in release, skip the runtime PM put when the interface is already gone and still run the rest of the per-file cleanup. Move the us122l->first bookkeeping after the checks so that a failed open no longer leaves a stale file pointer behind.
-
CVE-2026-99316
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Initialize idle URBs before submitting streams usb_stream_start() submits the first two capture and playback URBs and only afterwards assigns sk->idle_inurb, sk->idle_outurb, sk->completed_inurb and sk->completed_outurb to the remaining two URBs of each direction. A transfer can complete as soon as usb_submit_urb() has been called, so the completion handler i_capture_start() or i_playback_start() may run before those pointers are set. While the stream is still being synchronized (state below usb_stream_sync1), stream_start() then calls playback_prep_freqn(sk, sk->idle_outurb) with sk->idle_outurb still NULL, and the packet descriptors are written through that NULL pointer: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000018: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] RIP: 0010:playback_prep_freqn+0x11c/0x4a0 sound/usb/usx2y/usb_stream.c:33 Call Trace: <IRQ> stream_start+0x5dc/0x8d0 sound/usb/usx2y/usb_stream.c:596 i_capture_start+0x3da/0x710 sound/usb/usx2y/usb_stream.c:654 __usb_hcd_giveback_urb+0x238/0x550 drivers/usb/core/hcd.c:1657 usb_giveback_urb_bh+0x20b/0x530 drivers/usb/core/hcd.c:1691 tasklet_hi_action+0xa/0x20 kernel/softirq.c:994 handle_softirqs+0x16f/0x440 kernel/softirq.c:645 </IRQ> The four URBs referenced by these pointers are allocated long before and do not depend on any transfer state, so assign them before the submit loop. Keeping the assignment inside the retry path also restores a well-defined URB rotation when the start frame mismatch handling kills and resubmits the streams.
-
CVE-2026-99317
In the Linux kernel, the following vulnerability has been resolved: ALSA: hwdep: Serialize DSP load requests The check of the loaded DSP indices and the call of the driver's dsp_load callback in snd_hwdep_dsp_load() are not serialized. A hwdep file descriptor can be shared among threads, or inherited across fork, so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both observe the index as unloaded and enter the driver's callback concurrently, even though the device itself is opened exclusively. This breaks the assumption behind hw->dsp_loaded that a firmware index is loaded only once. For example, snd-usb-usx2y hits WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may allocate the US-428 sequence URBs twice. Serialize the check, the callback invocation and the bookkeeping with a per-hwdep mutex, so that the second request returns -EBUSY.
-
CVE-2026-59599
Android on supported Pixel devices before security patch level 2026-11-05 allows elevation of privilege in the hypervisor subcomponent in the kernel, aka A-519434175.
-
CVE-2026-73860
CRIU is a checkpoint and restore tool for Linux. Prior to 4.2.1, CRIU injects a syscall;int3 sequence at the start of the first executable virtual memory area and resumes the target process to execute parasite code. Malicious code in the target process can keep an rseq critical section armed over that injection point so the kernel's restartable-sequence abort redirects execution to an attacker-controlled callback when CRIU resumes the process. In container snapshot environments, the hijacked parasite runs with seccomp disabled and a relaxed AppArmor profile and supplies trusted data to the privileged CRIU process, which can enable higher-privilege code execution. This issue is fixed in version 4.2.1.
A list of CVEs whose flaw type is other, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.