Memory safety CVEs.
Published CVEs classified as memory safety, ranked by exploit odds.
-
CVE-2026-99301
In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.
-
CVE-2026-99295
In the Linux kernel, the following vulnerability has been resolved: smb: client: stop processing a read response after a receive error cifs_read_iter_from_socket() may call cifs_reconnect() before returning an error. The reconnect path aborts pending mids and invokes their callbacks. The callback can then release the cifs_io_subrequest containing rdata. cifs_readv_receive() nevertheless continues after a negative return and may dereference rdata in cifs_readv_discard(). KASAN reports the resulting UAF: BUG: KASAN: slab-use-after-free in cifs_readv_receive Read of size 4 by task cifsd cifs_readv_receive (fs/smb/client/transport.c:1284) cifs_demultiplex_thread (fs/smb/client/connect.c:1355) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Freed by task 148: netfs_put_subrequest (fs/netfs/objects.c:267) netfs_read_collection (fs/netfs/read_collect.c:460) netfs_wait_for_in_progress (fs/netfs/misc.c:462) Return the socket error immediately, as this path did before the iterator conversion. This also avoids adding a negative length to total_read.
-
CVE-2026-99297
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix double free in em28xx_alloc_urbs When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs() explicitly frees all items within usb_bufs->buf before calling em28xx_uninit_usb_xfer(), which also frees these items, causing them to be freed twice. BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) Free of addr ffff88802fd37c00 by task kworker/1:2/1182 Workqueue: events request_module_async Call Trace: kasan_report_invalid_free (mm/kasan/report.c:557) check_slab_allocation (mm/kasan/common.c:235) kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1)) usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) usb_free_urb (drivers/usb/core/urb.c:95) em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439) em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Freed by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer() handle the cleanup.
-
CVE-2026-99290
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free after a failed durable reconnect ksmbd_reopen_durable_fd() republishes a detached durable handle in the reconnecting session's file table and takes no reference for that entry. If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to remove the volatile id. Two reconnects of the same handle can both take a lookup reference before either attaches it. If the one that reopens first then fails and drops its references first, the other request makes the final put through ksmbd_put_durable_fd(). That frees the handle without removing the first session's table entry, so tearing that session down writes to freed memory. BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd] Call Trace: __close_file_table_ids+0x14d/0x740 [ksmbd] ksmbd_destroy_file_table+0x76/0x100 [ksmbd] ksmbd_session_destroy+0xf8/0x480 [ksmbd] ksmbd_dispose_sessions+0x13e/0x200 [ksmbd] ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd] Freed by task 1030: __ksmbd_close_fd+0x97d/0x1000 [ksmbd] smb2_open+0x14eb/0xd9f0 [ksmbd] Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file lifetime") handles a final put made by the reconnecting request, but not one made by another holder. Remove the volatile id under the file-table lock on this error path, before the references are dropped, as ksmbd_close_fd() does on the request_open path just above. Removal then no longer depends on which holder makes the final put. The stale comment in the reconnect cleanup is updated to match. A successful reconnect is unchanged.
-
CVE-2026-128991
xschem 2.9.9 through 3.4.7 contains an out-of-bounds read vulnerability in read_xschem_file() in src/save.c that mishandles embedded-symbol records lacking a preceding instance. Attackers can supply a crafted schematic beginning with a "[" record, causing xschem to read and dereference memory below the instance array and crash.
-
CVE-2026-109094
A integer overflow that can lead to a buffer overrread in the XRes QueryResourceBytes Swap Path in the X.Org xwayland before 24.1.15 and X Server before 21.1.26 on 32bit systems could be used by authenticated clients to crash the X server.
-
CVE-2026-109095
A integer overflow in glamor Xv Image Size handling in X.Org xwayland before 24.1.15 and X server before 21.1.26 could be used by authenticated clients to crash the X server or leak out data.
-
CVE-2026-111333
Memory overflow in an authentication request can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.
-
CVE-2026-95822
The SOCKS5 client in subsys/net/lib/socks/socks.c built the CONNECT request in socks5_tcp_connect() by choosing the SOCKS5 address type from the address family of the proxy (proxy->sa_family) while reading the bytes out of the destination address supplied to connect(). A SOCKS5 request encodes the destination independently of the transport used to reach the proxy, so the two families are unrelated and nothing in the path forces them to agree: set_context_proxy() only requires the proxy family to match the socket, and zsock_connect_ctx() enters the SOCKS branch before any destination validation. With an IPv6 proxy and an AF_INET destination the code treated an 8-byte struct net_sockaddr_in as a struct net_sockaddr_in6 and copied the 16-byte sin6_addr from it, reading 12 bytes past the end of the object and transmitting them to the proxy. With CONFIG_USERSPACE enabled, z_vrfy_zsock_connect() copies only addrlen user bytes into a stack-resident struct net_sockaddr_storage and enforces no per-family minimum length, so the oversized read stays within the storage but returns stale, uninitialised kernel-stack bytes. An unprivileged user-mode thread can therefore open an AF_INET6 stream socket, point setsockopt(SO_SOCKS5) at a proxy it controls, and call connect() with a short AF_INET destination to have the kernel send it 12 bytes of supervisor stack residue per attempt. Without CONFIG_USERSPACE the read runs past the end of the caller's own struct net_sockaddr_in, disclosing adjacent memory to the proxy; the family mismatch can arise unintentionally when a destination is obtained from DNS while an IPv6 proxy is configured. Impact is limited to information disclosure of at most 12 bytes per connect() call, with no write primitive; the leak is delivered to whoever operates the SOCKS5 proxy. The mirrored pairing (IPv6 destination through an IPv4 proxy) is memory-safe but encoded the destination as SOCKS5_ATYP_IPV4 from the first four bytes of the IPv6 address, causing the proxy to connect to an unrelated host. Exploitation requires the non-default CONFIG_SOCKS option, a socket with SO_SOCKS5 configured, and both IPv4 and IPv6 support in the image. The fix moves the encoding into a helper that selects the address type from dest->sa_family and validates dest_len against the matching struct net_sockaddr_in/struct net_sockaddr_in6 before copying, rejecting under-length or unsupported destinations with an error.
-
CVE-2026-127915
The MCUboot TLV iterator bootutil_tlv_iter_next() in boot/bootutil/src/tlv.c walks image trailer TLVs with a single loop guard (it->tlv_off < it->tlv_end) and advances by sizeof(struct image_tlv) + tlv.it_len using the attacker-controlled it_len field, without validating that the entry's header or payload stays within it->tlv_end. As a result the 4-byte header read can extend up to 3 bytes past the declared TLV area, and the returned (off, len) can describe a payload that runs past it. The path is pre-authentication: TLVs are parsed during bootutil_img_validate() before the signature is verified, and a crafted image can be presented through DFU / serial-recovery / OTA. However the impact is contained by surrounding guards: bootutil_img_validate() first rejects a TLV area larger than bootutil_max_image_size(), the default LOAD_IMAGE_DATA sink is flash_area_read() which bounds-checks against the flash partition and fails an out-of-partition read, and every payload consumer (EXPECTED_HASH_TLV, EXPECTED_KEY_TLV, EXPECTED_SIG_TLV, IMAGE_TLV_SEC_CNT) clamps len against a fixed buffer before copying. The residual effect in a default flash build is therefore an out-of-region read confined to the attacker's own slot partition whose result is never observable, yielding at worst a clean validation failure rather than memory corruption or information disclosure. A genuine (though still bounded) out-of-bounds read remains under the non-default MCUBOOT_RAM_LOAD configuration, where LOAD_IMAGE_DATA is an unchecked memcpy. The fix is to validate each entry's header and payload against it->tlv_end inside the iterator.
-
CVE-2026-107493
Issue summary: When an application passes a stack to PEM_X509_INFO_read_bio_ex() to add entries to, and reading fails, OpenSSL frees every entry in the stack, both the old ones and any new ones, but leaves them in the stack. Impact summary: An application that passes an existing stack to PEM_X509_INFO_read_bio_ex() and keeps using it after a failed read may use memory that was already freed. This can cause a crash or, in principle, memory corruption. Malformed PEM data can make the read fail, but only applications that pass an existing stack are affected, and OpenSSL itself does not do this. CWE: CWE-416: Use After Free Description: PEM_X509_INFO_read_bio_ex() reads certificates, CRLs and private keys from PEM data and adds them to a stack of X509_INFO structures. If the application passes a stack that is not NULL, the function adds the new entries to it and must leave the entries that are already there unchanged. If reading fails, the function frees every entry in the stack. This includes the entries that were there before the call, and the entries added by the call. It does not remove these entries from the stack, so the stack keeps pointers to freed memory. The failure can happen at any point, even before any entry was added. A PEM item with invalid content is enough. This also happens if the stack was empty: entries added before the failure are freed but stay in the stack. An application that then reads or frees the stack will use memory that was already freed. This can crash the application or, in principle, corrupt memory. Only applications that pass a stack that is not NULL are affected. OpenSSL itself never does this. Its own callers, including the code that TLS uses to load CA certificates, always pass NULL. When the stack is NULL, the function frees only the entries that it created itself, which is safe. We expect that very few applications pass an existing stack. An attacker can make the read fail with malformed PEM data, but cannot make an application pass an existing stack. The same problem affects PEM_X509_INFO_read_bio(), PEM_X509_INFO_read() and PEM_X509_INFO_read_ex(), which use the same code. OpenSSL 1.1.1 and 1.0.2 have only the first two of these functions. FIPS impact: no The affected code is outside the FIPS module boundary.
-
CVE-2026-93670
The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.
-
CVE-2026-127100
A flaw was found in SSSD's PAM responder on builds with the JSON PAM extension enabled. A local attacker can submit a crafted authentication request containing a non-string OAuth2 code value. Missing JSON type validation leads to a NULL pointer dereference, terminating the PAM responder and disrupting SSSD-backed authentication.
-
CVE-2026-21153
Stack-based buffer overflow in libsecuibc.so prior to SMR Nov-2026 Release 1 allows local attackers to execute arbitrary code.
-
CVE-2026-120866
Memory overflow / improper handling in BGP dynamic routing can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.
-
CVE-2026-16662
boot_save_boot_status() in boot/bootutil/src/boot_record.c reads the image's EXPECTED_HASH_TLV into a stack buffer image_hash[IMAGE_HASH_SIZE] that is never zero-initialised. The TLV handler validates only the upper bound (len > sizeof(image_hash)) and then reads exactly len bytes, so a TLV shorter than IMAGE_HASH_SIZE leaves the tail of image_hash holding stale stack content. The subsequent copy into the boot record, memcpy(buf + offset, image_hash, sizeof(image_hash)), uses the fixed buffer size rather than len, so up to IMAGE_HASH_SIZE - 1 bytes of uninitialised bootloader stack are written into the measured-boot record. The defect is reachable only under MCUBOOT_MEASURED_BOOT, and only when nothing has checked the length of the hash TLV before boot_save_boot_status() reads it. bootutil_img_validate() rejects a hash TLV whose length is not exactly sizeof(hash) (boot/bootutil/src/image_validate.c:345), and primary-slot validation is on by default (Zephyr's CONFIG_BOOT_VALIDATE_SLOT0 defaults to y), so in a default build the malformed image never reaches this code. Two kinds of build let a short TLV through: Builds that use pure signatures (MCUBOOT_SIGN_PURE, Zephyr CONFIG_BOOT_SIGNATURE_TYPE_PURE). The signature covers the image itself, so the hash-TLV check in bootutil_img_validate() is compiled out, and a pure-signed image normally carries no hash TLV. A hash TLV is still allowed in the unprotected TLV area, which the signature does not cover, so a short one can be added to a correctly signed image without invalidating it. This applies with every upgrade strategy, including direct-XIP and RAM-load, and the modified image can be delivered through any path that accepts a signed image. Builds with primary-slot validation turned off: the swap and overwrite loader built without MCUBOOT_VALIDATE_PRIMARY_SLOT, which checks only the image magic before calling boot_add_shared_data(), and the Zephyr single-slot loader (boot/zephyr/single_loader.c) built without it, including the MCUBOOT_VALIDATE_PRIMARY_SLOT_ONCE variant, which skips validation once the trailer records an earlier successful one. Placing the crafted image requires physical or flash-write access to the device; in a single-slot build with serial recovery enabled, the serial-recovery upload writes the primary slot directly and can place it as well. Outside pure-signature builds, the direct-XIP and RAM-load strategies in boot/bootutil/src/loader.c validate the selected slot unconditionally and are not affected. It is also reachable through a time-of-check/time-of-use change to tamperable external flash between validation and the boot-record read. In these configurations the boot record's measurement is already not trustworthy: the hash copied into the record is the image's own EXPECTED_HASH_TLV, which nothing has verified and which the attacker chooses. The defect therefore does not weaken attestation integrity any further. What it adds is a path for bootloader memory to leave the device: up to 63 bytes (IMAGE_HASH_SIZE - 1) of uninitialised bootloader stack are embedded in the measurement field that a downstream attestation service sends to a remote verifier. In the configurations analysed the residue is bootloader internal state (TLV offsets and lengths, flash addresses, loop state), not key material, but what occupies that stack region depends on configuration and on which code ran before boot_save_boot_status(). It is reported as a low-severity, defense-in-depth disclosure with no integrity or availability impact. This is distinct from the already-fixed record_len integer underflow in the same routine (GHSA-8hrv-4cp5-4rg3). The fix rejects any EXPECTED_HASH_TLV whose length is not exactly IMAGE_HASH_SIZE.
-
CVE-2026-0455
The Versal™ AI Edge Series Gen 2 Peripheral Protection Unit (XPPU) for the inter-processor interrupt (IPI) buffers does not block unauthorized access as expected. This allows processors in the SoC with any IPI channel access the ability to both read and write to the entire IPI buffer register space as well as the IPI no-buffer register control space.
-
CVE-2026-129606
Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Samsung Open Source mTower allows Overflow Buffers.
-
CVE-2026-115501
IBM i 7.3 7.4, 7.5, and 7.6 is vulnerable to a stack buffer overflow, caused by improper bounds checking in the QFileSvr.400 file system. By sending a command in the QFileSvr.400 file system, a local authenticated attacker could cause undefined behavior.
-
CVE-2026-130320
In Open Object Rexx (ooRexx) before 5.2.0, RXAPI mishandles nameArg and userid bounds checking, possibly leading to arbitrary code execution via crafted messages.
-
CVE-2026-63246
A kernel pool buffer overflow vulnerability in the ct0531fl.sys file of the Creative WDM Audio Driver (64-bit), Sound Blaster Audigy 4 and Sound Blaster Audigy 5/Rx could allow a local attacker with low privilege access to cause a denial of service.
-
CVE-2026-128885
A flaw was found in D-Bus. In configurations where the daemon falls back to using the Unix select() mechanism for event monitoring, it does not verify whether file descriptor numbers exceed allocated limits. A local attacker can exploit this flaw by opening a large number of concurrent connections to trigger an out-of-bounds write on the stack. This can cause the daemon to crash, resulting in a Denial of Service (DoS).
-
CVE-2026-128990
xschem 2.9.9 through 3.4.7 contains a heap out-of-bounds write vulnerability in read_dataset() in src/rawtovcd.c due to an unchecked variable index. Attackers can supply a crafted ngspice .raw file that, when converted with rawtovcd, writes file-controlled heap pointers at chosen signed offsets, corrupting heap memory.
-
CVE-2026-107902
TELLUS and TELLUS Lite provided by FUJI ELECTRIC CO., LTD. contain a use after free vulnerability. Opening a specially crafted V9 file may lead to information exposure or arbitrary code execution on the affected product.
-
CVE-2026-130065
msgpack-c through 7.0.2 contains a heap buffer overflow vulnerability in msgpack_vrefbuffer_migrate() in src/vrefbuffer.c that checks capacity against the source array's end pointer. When migrating between vrefbuffers of unequal size, the realloc is skipped and memcpy() writes iovec entries past the destination array, corrupting adjacent heap memory or crashing the application.
-
CVE-2026-128240
GPAC through 26.07.0 contains a use-after-free vulnerability in gf_sg_proto_del() in src/scenegraph/vrml_proto.c because gf_sg_reset() frees unregistered prototypes still referenced by scene commands. Attackers can supply a crafted XMT/BT scene declaring prototypes via commands, processed by MP4Box -chap, to trigger freed memory access and crash the process.
-
CVE-2026-0436
Insufficient parameter sanitization in the AMD Secure Processor (ASP) trusted execution environment (TEE) SPDM driver could allow an attacker to supply malicious input, potentially resulting in loss of platform integrity, memory leakage, or denial of service.
-
CVE-2026-16664
MCUboot's Zephyr serial-recovery upload handler bs_upload() in boot/boot_serial/src/boot_serial.c decodes the host-supplied image field of an MCUmgr image-upload request into img_num (a full 32-bit value) and latches it on the off == 0 packet without any range check. It then passes img_num straight to flash_area_id_from_multi_image_slot(img_num, 0), which on the Zephyr port resolves to __flash_area_ids_for_slot() in boot/zephyr/include/sysflash/sysflash.h and indexes the static const int all_slots[] table as all_slots[img_num 2]. That table holds only MCUBOOT_IMAGE_NUMBER 2 entries, so any img_num >= MCUBOOT_IMAGE_NUMBER is an out-of-bounds read. The path is reachable by anyone with access to the serial / SMP recovery console, which is unauthenticated by design, and the bad value is supplied before any image signature is verified. The defect is specific to the default non-direct upload path (MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD disabled) on the Zephyr port with the array-backed slot layout (not CONFIG_SINGLE_APPLICATION_SLOT). It is not gated on a multi-image configuration: MCUBOOT_IMAGE_NUMBER defaults to 1, so even a default single-image build is affected for any image >= 1. The MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD path is safe (its flash_area_id_from_direct_image() switch returns -EINVAL for unknown indices). flash_area_id_from_multi_image_slot() takes a signed int image_index while img_num is uint32_t, so the attacker controls the sign of the index as well as its magnitude: an image of 0xFFFFFFFE converts to -2 and reads all_slots[-4], off the front of the table, while large positive values read off the end (CWE-192). (0xFFFFFFFF itself is the "no image given" sentinel and selects image 0.) Either way the index multiply img * 2 is performed in int, so a wild offset yields a bus/hard fault, giving a reliable denial of service of the bootloader during recovery. For moderately out-of-range indices the read returns adjacent .rodata as a garbage flash-area id that is handed to flash_area_open(); this normally fails with MGMT_ERR_EINVAL, but if the garbage id happens to match a valid non-image partition, the subsequent erase/write can target a partition outside the image set (CWE-787). The attacker-supplied value is never echoed back, so there is no information disclosure. The fix is to reject img_num >= BOOT_IMAGE_NUMBER on the off == 0 packet, before the slot lookup. The comparison must be made on the unsigned img_num: an equivalent guard applied after the conversion to int would not reject the negative case above. __flash_area_ids_for_slot() should bounds-check its own arguments as defence in depth. This vulnerability was reported independently twice: by NVIDIA Project Vanessa on 2026-06-22, and by Kai Phan (@kaimandalic) on 2026-07-19 as GHSA-8v33-88p6-jffj, which is closed as a duplicate of this advisory. Both original reports are reproduced in full below.
-
CVE-2026-107901
TELLUS and TELLUS Lite provided by FUJI ELECTRIC CO., LTD. contain an out-of-bounds read vulnerability. Opening a specially crafted V9 file may lead to information exposure or arbitrary code execution on the affected product.
-
CVE-2026-130061
GPAC before 26.07.0 contains a double free vulnerability in gf_sg_sfcommand_del() that allows attackers to crash the process via crafted XMT scenes. Attackers can supply a crafted XMT/MP4 file where a Conditional node's SFCommandBuffer references a command freed twice during scene teardown, causing MP4Box to crash.
-
CVE-2026-130062
GPAC before 26.07.0 contains a NULL pointer dereference vulnerability in gf_node_get_tag() that allows attackers to crash the process via crafted XMT connect elements. Attackers can supply an XMT scene file whose connect element has a parent with no node, crashing MP4Box during processing and causing denial of service.
-
CVE-2025-71471
GPAC before 26.02.0 contains a use of uninitialized memory vulnerability in stbl_AddCTS() that allows attackers to corrupt sample table data via crafted MP4 files. Attackers can supply an MP4 with out-of-order composition time offsets for MP4Box import, triggering invalid memory access in gf_list_get() and crashing the process.
-
CVE-2025-71470
MicroQuickJS (mquickjs) before commit 99eed3f contains an out-of-bounds read vulnerability because JS_Call() raises exceptions during frame setup without updating ctx->sp and ctx->fp. Attackers can supply JavaScript that calls a non-function value, causing build_backtrace() to walk stale frame pointers and crash the engine for denial of service.
-
CVE-2025-71466
GPAC before 26.02.0 contains a NULL pointer dereference vulnerability in m2tsdmx_update_sdt() in src/filters/dmx_m2ts.c that allows attackers to crash the MPEG-2 TS demuxer. Attackers can supply a crafted .ts file with an invalid service descriptor leaving service or provider names NULL to crash MP4Box and cause denial of service.
-
CVE-2025-71467
GPAC before 26.02.0 contains a NULL pointer dereference vulnerability in gf_node_get_field_by_name() in src/scenegraph/base_scenegraph.c that lets attackers crash applications. Attackers can supply a crafted XMT scene referencing a never-created node to crash MP4Box or GPAC scene loader applications, causing denial of service.
-
CVE-2025-71468
GPAC before 26.02.0 contains a NULL pointer dereference vulnerability in gf_dash_group_get_audio_channels() in src/media_tools/dash_client.c that allows attackers to crash applications via crafted DASH manifests. Attackers can supply an MPD whose AudioChannelConfiguration element omits schemeIdUri or value, crashing MP4Box or GPAC DASH clients and causing denial of service.
-
CVE-2026-129479
Assimp through 6.0.6 contains an integer overflow vulnerability in OgreBinarySerializer::ReadSubMesh that allows attackers to crash applications by supplying crafted Ogre binary .mesh files. Attackers can set a large index count so the 32-bit buffer size wraps, causing a segmentation fault in aiMesh::~aiMesh() during scene teardown.
-
CVE-2026-130290
In Open Object Rexx (ooRexx) before 5.2.0, RXAPI has a heap buffer over-read in a QueueManager DataQueue::addmethod. In particular, the code blindly trusts the message.parameter1 value provided by the client as the size used to fill the data from the queueData heap buffer. An attacker sends a large parameter1 value in an ADD_TO_SESSION_QUEUE or ADD_TO_NAMED_QUEUE message and then retrieves data with a PULL_FROM_SESSION_QUEUE message. (A very large value causes a process crash.)
-
CVE-2026-129478
Assimp through 6.0.6 contains a heap out-of-bounds read vulnerability in glTFCommon::Util::ParseDataURI caused by storing the data offset in a signed char. Attackers can supply a crafted glTF file with a raw data URI whose segment starts beyond byte 127 to crash applications or leak adjacent heap memory.
-
CVE-2026-15465
Software installed and run as a non-privileged user may conduct improper GPU system calls through the DDK kernel module interface. Under unsupported use of the interface, a use-after-free condition may occur that can lead to kernel memory corruption, platform instability, or system reboot. The weakness occurs when software references memory after it has been released. Accessing memory after free may result in corruption of valid data structures, unexpected program behaviour, process crashes, or execution of unintended operations.
-
CVE-2026-82292
A NULL pointer dereference vulnerability in the Qt Framework QDomDocument::setContent() XML parsing path of the Qt XML module (qtbase).
-
CVE-2026-21156
Out-of-bounds write in libsmkvextractor.so prior to SMR Nov-2026 Release 1 allows local attackers to write out-of-bounds memory.
-
CVE-2026-130063
GPAC before 26.07.0 contains a use-after-free vulnerability in the XMT scene loader that allows attackers to read freed heap memory via discarded nodes left on the parser node stack. Attackers can supply a crafted XMT scene file processed by MP4Box, causing xmt_text_content() to call gf_node_get_tag() on a freed node and crash the process.
-
CVE-2026-130064
GPAC before 26.07.0 contains a use-after-free vulnerability in gf_sg_command_del() that allows attackers to trigger reads of freed memory through aliased XMT-A SFCommandBuffer command ownership. Attackers can supply a crafted XMT scene file processed by MP4Box, causing commands freed during node destruction to be reaccessed during access unit cleanup, crashing the process.
-
CVE-2026-84234
LibreOffice can open PDF files in Draw, where the PDF import converts each page into drawing objects that can be edited. Images in the PDF, including images with a transparency mask, are converted along the way. An out-of-bounds write existed when an image with a transparency mask was converted, because positions taken from a crafted image were not checked against the size of the image buffer. In fixed versions the image size is limited, and the position of each mask pixel is checked before it is written.
-
CVE-2026-18563
LibreOffice supports fonts embedded in documents. When a document is exported to PDF, the fonts it uses are embedded in the PDF, and a font in CFF (Compact Font Format) is converted to another font format on the way. An out-of-bounds write existed when the charstring program of a crafted font was interpreted, because some indexes and ranges taken from the font were not checked against the size of the data they refer to. In fixed versions these indexes and ranges are checked, and a font that fails the checks is not converted.
-
CVE-2026-18566
LibreOffice can import EMF, EMF+ and WMF images, which may be embedded in documents. Several out-of-bounds reads existed in the readers for these formats, because sizes, counts and offsets taken from a crafted image were not checked against the data the image actually holds. In fixed versions these values are checked against the size of each record and the data that remains, and a record that fails the checks is not used.
-
CVE-2026-101351
LibreOffice can import PICT images, which may be embedded in documents. Parts of a crafted image could be left unwritten, so leftover memory became part of the imported image and could be saved with the document. In fixed versions the pixels of a new image start out cleared, so any part the image data does not fill is blank.
-
CVE-2026-129480
Assimp through 6.0.6 contains a heap out-of-bounds read vulnerability in MD2Importer::InternReadFile that allows attackers to read past the file buffer via an unvalidated stored frameSize header field. Attackers can supply a crafted .md2 file loaded with a non-zero keyframe selected to crash the application or leak adjacent heap memory into the imported mesh.
-
CVE-2026-127916
bootutil_img_hash() computes the image digest over ih_hdr_size + ih_img_size + ih_protect_tlv_size bytes, all three taken from the candidate image's header, and reads that span out of the slot without checking that it fits in the flash area. The three sizes are also summed without an overflow check. Nothing earlier on the validation path bounds the whole span either: bootutil_img_validate() compares the image size against bootutil_max_image_size() only after the hash has been computed. The callers bound part of the span, or none of it: On the swap and overwrite upgrade path, boot_validate_slot() first runs the image header check (boot_is_header_valid(), later boot_check_header_valid()). Before MCUboot 2.2.0 that check covered only ih_hdr_size + ih_img_size, so for every image the protected-TLV area (ih_protect_tlv_size, a uint16_t, up to 65535 bytes) was hashed without being bounded. From 2.2.0 the check includes ih_protect_tlv_size, except for a compressed image in the secondary slot when MCUBOOT_DECOMPRESS_IMAGES (CONFIG_BOOT_DECOMPRESSION) is enabled, which leaves the same gap of up to 64 KB. Zephyr's single-slot and firmware loaders (boot/zephyr/single_loader.c, boot/zephyr/firmware_loader.c) read the header with boot_image_load_header(), which bounds ih_hdr_size + ih_img_size against the flash area. Before MCUboot 2.4.0 that bound did not include ih_protect_tlv_size, which leaves the same gap of up to 64 KB. From 2.4.0 these loaders bound the whole span. The serial recovery image-list and image-state handlers (bs_list() and bs_set() in boot/boot_serial/src/boot_serial.c) call bootutil_img_validate() with no header check at all, so on those paths ih_img_size is unbounded as well. The image is hashed before its signature is checked, so anyone who can place an image in a slot (an OTA or SMP update delivered through the application, or serial recovery) reaches this read before authentication. Whether a malformed header produces an actual read beyond the area depends on the flash backend: Backends whose flash_area_read() bounds-checks the request (Zephyr, Espressif, NuttX, Mbed) return an error once the chunked read crosses the end of the area. Validation fails and the image is rejected, with no over-read. With MCUBOOT_HASH_STORAGE_DIRECTLY (Zephyr CONFIG_BOOT_IMG_HASH_DIRECTLY_ON_STORAGE, available from 2.2.0, not enabled by default) the span is hashed through a single direct pointer into memory-mapped flash, with no bounds check. The Cypress PSoC6 port's flash_area_read() (boot/cypress/cy_flash_pal/cy_flash_map.c, from 1.6.0) does not bound the read: its assert()s compare against the area's absolute offset rather than its size, and it copies with memcpy(). The bytes read past the area feed only the digest, which is compared internally and never returned, so nothing is disclosed. The realistic effect is a read fault during image validation: up to 64 KB past the slot on the upgrade path and, before 2.4.0, on the Zephyr loaders, and potentially much further on the serial recovery handlers, which skip the header check. Where validation is repeated at every boot (a pending upgrade, or, before 2.4.0, the single-slot loader checking its image), the fault can recur on each reset and keep the device from booting. The fix makes bootutil_img_hash() add the three sizes with boot_u32_safe_add() and reject an image whose span, including the sector offset used in swap-using-offset mode, does not fit in the flash area, before any of it is hashed. Because the bound is applied where the bytes are read, it covers every caller.
A list of CVEs whose flaw type is memory safety, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.