Memory safety CVEs.
Published CVEs classified as memory safety, ranked by exploit odds.
-
CVE-2026-99518
In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wmi: fix use-after-free unregistering kbd_led led kbd_led_update_all() registers asus->kbd_led with devm_led_classdev_register() on the platform device, but kbd_led is embedded in struct asus_wmi, which asus_wmi_remove() frees at its end. The driver core calls .remove() before devres_release_all(), so the deferred devres release runs led_classdev_unregister() on memory that has already been freed. Whether that faults depends on whether the slab has been reused in between, which makes the crash on module unload intermittent and silently corrupts the led classdev state in the remaining runs. Unregister the led classdev explicitly in asus_wmi_led_exit(), after the led workqueue has been destroyed: kbd_led_work can then neither run nor be queued anymore, since asus_ref.asus is NULL too, so kbd_led_registered is stable and the classdev can be released while the memory embedding it is still alive. devm_led_classdev_unregister() also drops the devres entry, leaving nothing to run at unbind cleanup time; it warns when no devres entry exists, hence the kbd_led_registered check.
-
CVE-2026-99519
In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix use-after-free of perf domain in netlink doit handlers The doit handlers dropped em_pd_list_mutex before dereferencing the perf domain, so a concurrent device unregister could free it while the reply was being built. Encode the reply from em_perf_domain_for_id() callbacks, which run under the mutex, and allocate the skb outside of it, like the dumpit path already does. This issue was found by an in-house static analysis tool.
-
CVE-2026-99523
In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Fix DMABUF use-after-free during ufile cleanup The DMABUF release can race with ufile cleanup. When the cleanup holds hw_destroy_rwsem for write, uverbs_uobject_release() fails its trylock and leaves the uobject on the ufile list, but the dma_buf is freed as soon as the release returns. The cleanup then destroys the uobject and uses the freed dma_buf: BUG: KASAN: slab-use-after-free in uverbs_dmabuf_fd_destroy_uobj+0x46/0x200 Read of size 8 at addr ff11000109cf14b0 by task repro/435 Call Trace: uverbs_dmabuf_fd_destroy_uobj+0x46/0x200 destroy_hw_fd_uobject+0x3f/0x50 uverbs_destroy_uobject+0xc5/0x380 __uverbs_cleanup_ufile+0x1a8/0x260 uverbs_destroy_ufile_hw+0x54/0x160 ib_uverbs_close+0x34/0x110 Allocated by task 435: dma_buf_export+0x1b5/0x530 ib_uverbs_handler_UVERBS_METHOD_DMABUF_ALLOC+0x223/0x3f0 Freed by task 436: kfree+0x301/0x530 dentry_kill+0x14c/0x560 __fput+0x23a/0x4a0 rdma_user_mmap_entry_remove() dereferences the same pointer. Protect the stored dma_buf pointer with a mutex and clear it before release returns. Use a shared revoke helper so uobject destruction and mmap entry removal both skip a cleared pointer. Hold a temporary uobject reference across uverbs_uobject_release() and the pointer update. Use a separate mutex because uobject destruction can free the mmap entry before release finishes. Map and unmap use attachment->dmabuf directly, so they do not need to take the new mutex while holding the reservation lock.
-
CVE-2026-99502
In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix double-free and NULL deref in zpci MSI domain cleanup zpci_remove_parent_msi_domain() dereferences zbus->msi_parent_domain unconditionally and does not clear it afterwards. zpci_bus_create_pci_bus() removes the domain when pci_create_root_bus() fails, then zpci_bus_release() removes it again on the last kref_put(), reading ->fwnode from the freed irq_domain and freeing it twice. If zpci_alloc_domain() or zpci_create_parent_msi_domain() fails, no domain is created at all; zbus is kzalloc'd, so the same release path dereferences NULL. Return early when there is no domain, and clear the pointer after removing one.
-
CVE-2026-99495
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix and improve zcrypt reply message verification checks Add or improve checks related to buffer sizes and reply sizes to the handling of replies from the crypto cards for CCA, EP11 (AP message type 6) and ICA (AP type 50) messages. The verification code related to reply field length was not designed well and thus firmware deficiencies could lead to unexpected behavior in the zcrypt device driver. Thus improve the code to more closely inspect especially length fields at message replies. Add length validation before accessing reply message structures in zcrypt_msgtype6_receive(), zcrypt_msgtype6_receive_ep11(), and zcrypt_msgtype50_receive() to prevent out-of-bounds reads and potential kernel memory disclosure. Also rework these three functions to validate reply lengths more carefully before copying data back into the request buffer. Use size_t for length calculations, reject inconsistent reply sizes, and add defensive handling for short invalid replies. For XCRB replies, validate both reply segments and derive the effective message length from the covered range instead of trusting only the second segment. Additionally improve some of the later invoked evaluation functions which further check the payload. Add comments about length assumptions and for the type50 processing rework the payload processing completely with removing a misplaced BUG_ON().
-
CVE-2026-99499
In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix use-after-free race in zpci floating interrupt cleanup zpci_clear_irq() stops the adapter from raising new interrupts for the function, but a zpci_floating_irq_handler() already running on another CPU can still be scanning zdev->aibv when zpci_msi_teardown_floating() releases it. Clear the zpci_ibv[] entry so no further handler picks the vector up, then wait for a grace period before releasing it. The handler runs inside the rcu_read_lock() section that do_airq_interrupt() holds across airq->handler(), so synchronize_rcu() drains any handler still in flight. Release the vector and free the summary bit only after the grace period, so neither can be reused while a reader still holds the old pointer. zpci_ibv served both delivery modes, indexed by function under FLOATING and by cpu under DIRECTED. Only the floating vectors are published to and torn down under the interrupt handler, so split the directed vectors out into zpci_dibv and annotate zpci_ibv __rcu, which lets sparse check the accessors above.
-
CVE-2026-99485
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: clear the mailbox channel pointer when starting it fails aie2_create_context() allocates a mailbox channel, starts it, and on a failed start frees it again: hwctx->priv->mbox_chann = xdna_mailbox_alloc_channel(ndev->mbox); ... ret = xdna_mailbox_start_channel(hwctx->priv->mbox_chann, ...); if (ret) goto free_channel; ... free_channel: xdna_mailbox_free_channel(hwctx->priv->mbox_chann); hwctx->priv->mbox_chann keeps pointing at the freed channel. That pointer is the driver's own test for whether a hardware context has a usable channel: aie2_destroy_context() returns early on NULL, aie2_sched_job_run() refuses to run a job on NULL, and the message helpers return -ENODEV on NULL. A stale pointer passes all of them. It matters on the restart path. aie2_hwctx_restart() calls aie2_create_context() again on a hardware context that is already live, after aie2_hwctx_stop() has torn its channel down, and the context survives a failure there: aie2_sched_job_timedout() discards the return value entirely, and aie2_hwctx_resume() only propagates it. What is left is a live hardware context holding a freed channel, and every later user of it takes the non-NULL branch: - the next job submitted reaches xdna_mailbox_send_msg() on the freed channel, via the !mbox_chann guard in aie2_sched_job_run(), - a second command timeout reaches aie2_hwctx_stop() -> aie2_destroy_context(), - closing the device reaches aie2_hwctx_fini() -> aie2_release_resource() -> xrs_release_resource() -> aie2_xrs_unload() -> aie2_destroy_context(), and aie2_destroy_context() then calls xdna_mailbox_stop_channel() followed by xdna_mailbox_free_channel() on memory that was already freed: a use-after-free, and a second free of the same channel. The AIE4 management channel already does this correctly - aie4_mailbox_start() clears ndev->aie.mgmt_chann right after freeing it. Do the same here. The create path itself is not affected: when aie2_xrs_load() fails, xrs_allocate_resource() removes the solver node without calling ->unload, and aie2_hwctx_init() frees hwctx->priv, so the stale pointer never outlives the structure holding it. Starting a channel can fail today without this patch: the ring buffer sizes firmware reports are rejected unless both are powers of two, and request_irq() can fail.
-
CVE-2026-99476
In the Linux kernel, the following vulnerability has been resolved: fsverity: Set S_VERITY only after rollback is no longer possible Commit f77f281b6118 ("fsverity: use a hashtable to find the fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to make concurrent reads start going through fsverity verification slightly earlier than they did before. Instead of it happening when enable_verity() calls fsverity_set_info(), it now happens when ->end_enable_verity() sets S_VERITY. However, ext4 and btrfs can roll back verity after they set S_VERITY, causing a use-after-free. Fix that by making ext4 and btrfs set S_VERITY only after rollback is no longer possible. On failure, don't roll back S_VERITY, but do roll back the filesystem-specific verity flag. Also update enable_verity() to handle any future instances of this bug more safely by warning and *not* freeing the fsverity_info. Finally, tweak some comments. Clarify one, and move information from another to its proper place in the comment for ->end_enable_verity().
-
CVE-2026-99478
In the Linux kernel, the following vulnerability has been resolved: filelock: keep superblock active through delegation wait A caller may drop its path after try_break_deleg() returns a delegated inode but before break_deleg_wait() finishes. The extra inode reference held in struct delegated_inode does not keep the superblock active. After a lazy unmount, closing the delegation holder can release the last mount reference and shut down the superblock while another task waits for the delegation break. The waiter's final iput() can then enter the filesystem's eviction code after its superblock-private state was freed. This has been observed as a KASAN use-after-free in shmem_evict_inode(). When try_break_deleg() saves a delegated inode, take an active reference to its superblock while the caller still pins the mount. Keep that reference through break_deleg_wait() and the final iput(), then release it with deactivate_super(). This protects every caller of the helpers, including the mknod, mkdir, symlink and rmdir paths that drop their path before waiting.
-
CVE-2026-99457
In the Linux kernel, the following vulnerability has been resolved: net: sched: prevent scheduling deactivated qdiscs TAPRIO can schedule a deactivated qdisc after some_qdisc_is_busy() has reported it idle. Commit 47e8dbb6e763 ("net/sched: do not reset queues in graft operations") made graft deactivation skip queue reset, leaving TAPRIO's timer armed. A late callback schedules NET_TX softirq work, whose dequeue path can race the unlocked child-queue reset in taprio_reset(). The same skb can be queued for deferred freeing by RTNL and dequeued for transmission. In the reproducer, the TAP reader frees it before __rtnl_unlock() reads its next pointer. KASAN reports a slab-use-after-free in __rtnl_unlock+0xa3/0xd0, with a read of size 8 from the freed skb. Reject deactivated qdiscs in __netif_schedule(). Callers' RCU protection lets the existing grace period join earlier scheduling calls before the busy check. Restart nonempty transmit queues on reactivation so suppressed scheduling does not strand packets.
-
CVE-2026-99458
In the Linux kernel, the following vulnerability has been resolved: mtd: virt-concat: unlink discarded items before freeing mtd_virt_concat_destroy_items() frees each item without removing it from concat_node_list. list_for_each_entry_safe() protects the current traversal, but concat_node_list still points to the freed items afterward. The function also unwinds errors from mtd_virt_concat_node_create(). A later initialization can traverse a freed item in mtd_is_part_concat(), causing a use-after-free. Unlink each item before freeing it.
-
CVE-2026-99459
In the Linux kernel, the following vulnerability has been resolved: mshv_vtl: detach poll waiter on POLLFREE MSHV_SET_POLL_FILE keeps a poll wait entry after the ioctl returns. A file reference does not always pin the registered waitqueue: signalfd_poll() uses current->sighand->signalfd_wqh, whose lifetime is tied to the task. signalfd_cleanup() sends POLLFREE before the sighand is freed. The MSHV callback currently leaves its entry linked, so __wake_up_pollfree() warns and a later replacement calls remove_wait_queue() through a stale wqh pointer. A source-equivalent KASAN run reproduced: BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave _raw_spin_lock_irqsave remove_wait_queue harness_ioctl [mshv_pollfree_harness] The object belonged to sighand_cache and had been released through slab_free_after_rcu_debug() after __cleanup_sighand(). On POLLFREE, unlink the entry under the provider waitqueue lock. Preserve the existing CPU cancellation before publishing a NULL wqh, since a NULL load lets a racing replacement reuse the persistent poll state. Use a matching acquire load under RCU when removing a normal registration. The callback takes no mutex and does not sleep, so the existing mutex-to-waitqueue-lock order is unchanged. An LLM assisted the source audit, fix development, and validation of this issue.
-
CVE-2026-58844
In multiple locations, there is a possible out of bounds read/write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-20566
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, if a malicious actor has already obtained the System privilege. User interaction is needed for exploitation. Patch ID: MOLY01923663 / ALPS11315955; Issue ID: MSV-10866.
-
CVE-2026-119719
Blender before 4.5.15 and 5.x before 5.2.3 contains a heap buffer overflow vulnerability in the blend file thumbnail extractor caused by 32-bit integer overflow in thumb_data_vertical_flip(). Attackers can craft a .blend file with malicious TEST block dimensions that trigger an out-of-bounds write when blender-thumbnailer or the Windows shell extension previews it, causing crashes or code execution.
-
CVE-2026-99162
In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix use-after-free bug when adding shared proxies The GPIO lookup table can stay alive for longer than the kobject whose name string's address we're assigning to lookup->dev_id. Fix a potential UAF by duplicating the string.
-
CVE-2026-99144
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue A deferred reenqueue can read a freed user DSQ. The request stays on its CPU's deferred list until run_deferred() takes it, and the RCU callback that frees the DSQ assumes that the grace period has flushed it, so exit_dsq() checks the per-CPU node without the deferred list lock. A grace period waits for readers in flight, not for a pending run_deferred(). A run_deferred() which starts after the grace period began can detach the request right before the callback looks and then read the freed DSQ's id. Cancel the pending requests before the grace period instead. The irq work that frees the DSQ unlinks every CPU's request under the per-CPU deferred list lock, and schedule_dsq_reenq() ignores a new request under the same lock once the id is invalid. Only a run_deferred() that started before the grace period can hold a request, and it runs with IRQs disabled, so the grace period waits for it and nothing touches the DSQ after the callback.
-
CVE-2026-99149
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix GEM object leak on ENOMEM in userptr ioctl When amdgpu_hmm_range_alloc() fails amdgpu_gem_userptr_ioctl() returns -ENOMEM right away and skips the cleanup every other error path goes through. The GEM object, the bo->parent reference on the VM root and the MMU notifier registration are all left behind. Use release_object here, not user_pages_done, range is still NULL at this point. (cherry picked from commit bbe739e407a542073ec1a7872b14843566b4919e)
-
CVE-2026-99023
In the Linux kernel, the following vulnerability has been resolved: power: sequencing: pcie-m2: Fix leaking array from of_regulator_bulk_get_all() of_regulator_bulk_get_all() allocates the consumers array and hands it to the caller, who is expected to free it at an appropriate time. pwrseq-pcie-m2.c never did, leading to a memory leak. Add an explicit kfree() for the consumers array.
-
CVE-2026-98921
In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_do_mkdir() debug print ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir(). Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on failure."), vfs_mkdir() calls end_creating() on the input dentry on failure and may replace it on success, so the post-call %pd can use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled. Print the dentry before the call and only the result afterward.
-
CVE-2026-79892
A memory corruption vulnerability exists in AOS-8 that could allow an authenticated local attacker to execute arbitrary code. Successful exploitation could allow the attacker to execute arbitrary code as a privileged user on the underlying operating system.
-
CVE-2026-99767
In the Linux kernel, the following vulnerability has been resolved: xfrm4: use a full socket for local errors xfrm4_local_error() passes skb->sk to inet_sk() and ip_local_error() without ensuring it points to a full socket. TCP SYN-ACK skbs can be owned by TCP_NEW_SYN_RECV request sockets. xfrm4_tunnel_check_size() already checks sk_fullsock() since commit 1620c88887b1 ("xfrm: Fix the usage of skb->sk"), so iptfs_is_too_big() is the only remaining IPv4 caller passing a request socket here: the sk it tests is the listener, while skb->sk is the request socket. When IP-TFS rejects such an skb because it exceeds its payload MTU, the local error path treats the request socket as a struct inet_sock. KASAN reports a slab-out-of-bounds read in ip_local_error() beyond the request_sock_TCP allocation. Resolve the skb owner with skb_to_full_sk() before accessing inet_sock state or reporting the error. This maps a request socket to its listener and rejects sockets that cannot be used as full sockets, matching what commit 6973a21ee73c ("ipv6: xfrm: use full sockets in local error paths") did for xfrm6_local_error().
-
CVE-2026-128991
xschem 2.9.9 through 3.4.7 contains an out-of-bounds read vulnerability in read_xschem_file() in src/save.c that mishandles embedded-symbol records lacking a preceding instance. Attackers can supply a crafted schematic beginning with a "[" record, causing xschem to read and dereference memory below the instance array and crash.
-
CVE-2026-126064
Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.5, the CRuby native extension can leave Ruby wrappers pointing to freed memory when Nokogiri::XML::Node#[]= or Nokogiri::XML::Node#lang= replaces an existing attribute value after code has accessed the attribute's child nodes. Replacing the value frees native child nodes while their wrappers remain reachable, and later use of those wrappers can cause an invalid read or process segfault. JRuby is not affected. This issue is fixed in version 1.19.5.
-
CVE-2026-125215
FFmpeg 7.1 through 9.0.2 contains a NULL pointer dereference vulnerability in ff_dovi_rpu_generate() in libavcodec/dovi_rpuenc.c that allows attackers to crash applications via crafted Dolby Vision RPU metadata. Attackers can supply streams with default or alternating omitted DM blocks to the dovi_rpu bitstream filter with compression enabled, causing denial of service.
-
CVE-2026-119086
Missing queue-set type validation in the queue-set selection system call in FreeRTOS-Kernel before V11.3.3 on MPU-enabled ports with queue sets enabled allows a local unprivileged task to write actor-controlled data beyond a pointer-sized object on the privileged kernel stack, affecting privileged memory across the MPU isolation boundary. To remediate this issue, users should upgrade to FreeRTOS-Kernel V11.3.3, rebuild, and reflash affected firmware. Builds that do not enable queue sets are not affected.
-
CVE-2026-61627
libass is a portable subtitle renderer for the `ASS`/SSA (Advanced Substation Alpha/Substation Alpha) subtitle format. Prior to 0.17.5, libass can overread and overwrite the glyph array in `wrap_lines_measure` while rendering malicious `ASS` content. In `wrap modes other than two`, a final line ending with a literal backslash-n sequence and otherwise consisting only of such sequences or spaces can remain after early trimming and make the line-measurement loops overshoot by one glyph. When the total text size exactly matches the allocated glyph-array capacity, the first loop reads an uninitialized 32-bit fixed-point `pos.x` value, although that value is not subsequently used. The second loop writes `pos.x` and `pos.y` beyond the array, zeroing the first and adding an attacker-controllable offset to the second. No actual exploitation beyond possible denial of service is known; broader exploitation is theoretical and constrained by the addresses, limited writes, and ASLR. This issue is fixed in version 0.17.5.
-
CVE-2026-99208
In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Zero OA buffer at allocation ttm_bo_type_kernel BOs are not guaranteed to be zeroed on allocation and may contain data from previously freed pages. Since the OA buffer is mmap'able by userspace, this can expose stale kernel memory contents. Streams opened with DRM_XE_OA_PROPERTY_OA_DISABLED allocate the OA buffer without calling xe_oa_init_oa_buffer(). Zero the buffer at allocation to prevent information disclosure through mmap. The existing zeroing in xe_oa_init_oa_buffer() remains necessary for zero report-id/timestamp detection on enable/re-enable. (cherry picked from commit 126c4c5388f9311a390b9b254a835b0cf0f55331)
-
CVE-2026-100982
NVIDIA OpenShell for Linux contains a vulnerability in its inference-interception request parser where a sandboxed actor could exhaust processing resources by sending a chunked request that lacks body-size and chunk-count limits, causing excessive parsing work. A successful exploit of this vulnerability might lead to denial of service.
-
CVE-2026-90833
The simulated EEPROM driver validated access ranges in eeprom_range_is_valid() (drivers/eeprom/eeprom_simulator.c) with a single test, (offset + len) <= config->size. Because offset is a signed off_t and len an unsigned size_t of the same rank, the addition is evaluated in unsigned arithmetic: a negative offset combined with a compensating len wraps the sum back into the accepted range. eeprom_sim_read() and eeprom_sim_write() then memcpy() through the EEPROM(addr) macro, which is plain pointer arithmetic on the driver's static mock_eeprom array, so the copy addresses memory located before that array. eeprom_read() and eeprom_write() are __syscall entry points, and their verification handlers in drivers/eeprom/eeprom_handlers.c check only the device object and the caller's own data buffer (K_SYSCALL_MEMORY_READ/K_SYSCALL_MEMORY_WRITE) — the offset argument is passed to the driver unvalidated. With CONFIG_USERSPACE=y, a CONFIG_EEPROM_SIMULATOR device instance, and the device object granted to a user thread (the usage the in-tree tests/drivers/eeprom/api suite exercises from ZTEST_USER threads), an unprivileged thread could supply a negative offset and have the kernel perform the copy on its behalf. The result is an out-of-bounds read of kernel .bss returned into the caller's buffer and, via the write path, an out-of-bounds write of caller-supplied bytes over kernel memory preceding mock_eeprom. Both the start address and the length of the affected span are attacker-selected, so the primitive is sufficient to corrupt adjacent kernel state and escape the user-mode sandbox. Exposure is limited to builds that instantiate the simulated EEPROM (status = "okay" by default on qemu_x86 and native_sim, otherwise added by a devicetree overlay) together with userspace isolation. The fix rejects negative offsets and performs the remaining bound check without overflow.
-
CVE-2026-103393
An Out-of-Bounds Read vulnerability in the VRRP implementation in Juniper Networks Session Smart Router allows an L2-adjacent attacker to read stale memory contents or cause a system fault via a specially crafted VRRPv3 advertisement.
-
CVE-2026-47486
NVIDIA PhysX for all platforms contains a vulnerability where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to code execution, data tampering, denial of service, information disclosure.
-
CVE-2026-113941
An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination or read kernel memory.
-
CVE-2026-113944
An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination or read kernel memory.
-
CVE-2026-113946
An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination or corrupt kernel memory.
-
CVE-2026-112417
An integer overflow was addressed with improved input validation. This issue is fixed in visionOS 27.2. Processing a maliciously crafted 3D model may lead to memory corruption.
-
CVE-2026-99320
In the Linux kernel, the following vulnerability has been resolved: ipv6: raw: fix use-after-free in rawv6_send_hdrinc() rawv6_send_hdrinc() caches the route before handing the skb to l3mdev_ip6_out(). The VRF output path may replace skb->dst and release the original route, leaving the cached pointer stale. The function later dereferences that pointer for statistics accounting and as the output device passed to NF_HOOK(). Its RCU read-side critical section starts after l3mdev_ip6_out(), so it cannot prevent the old route from being reclaimed in between. Reload the route from the current skb destination after l3mdev_ip6_out() returns. KASAN reports a slab-use-after-free in rawv6_sendmsg(), with the route allocated by ip6_dst_alloc(), freed by dst_destroy() from rcu_core(), and the related RCU callback queued from vrf_l3_out().
-
CVE-2026-109908
A heap buffer overflow in reading encoding files in X.Org libfontenc before 1.11.0 could be used by local attackers able to inject enc files to the X server could crash or escalate privileges.
-
CVE-2026-118752
FreeImage through 3.18.0 and the danoli3 FreeImage fork before 3.19.22 contain a heap buffer overflow vulnerability in the PBM RLE decoder of PluginIFF.cpp that lacks bounds checks on ByteRun1 runs. Attackers can supply a crafted IFF/LBM PBM file with runs straddling scanline ends to write up to 127 controlled bytes past the heap-allocated bitmap.
-
CVE-2026-47235
SimulationCraft is a tool to explore combat mechanics in World of Warcraft. In builds after release-820-01 and before the identified May 7, 2026 nightly, the `bcp_api.cpp` loop over the JSON `sockets` array uses `slot_data["sockets"].Size()` without bounding `gem_idx` by `MAX_GEM_SLOTS`, which is four in `engine/sc_enums.hpp`. The destination `gem_id` and `gem_bonus_id` arrays in `engine/item/item.hpp` have only four elements. More than four socket entries therefore write beyond `gem_id` into the adjacent `gem_bonus_id` vector storage; `bonus_list` entries can also access `gem_bonus_id` out of bounds. Corrupting a vector's `_M_start` pointer causes the `item_t` destructor to free an attacker-influenced pointer during normal cleanup. The advisory reports crashes and code execution demonstrated in a testing environment. Attack inputs can arrive through a malicious `.simc` profile with a `[[equipment]]` section, a compromised addon export, or `Battle.net API` responses modified by an attacker with a privileged network position. The fix is contained in the nightly build identified as simc-1205-01-516b5d7; no containing release tag is available.
-
CVE-2026-99051
In the Linux kernel, the following vulnerability has been resolved: fsverity: RCU-delay the freeing of struct fsverity_info __fsverity_get_info() calls rhashtable_lookup_fast(), which just uses rcu_read_lock() and doesn't directly synchronize with fsverity_remove_info(). For the same inode this isn't a problem: its fsverity_info is removed only at inode eviction time or upon failure to enable verity, when the inode no longer needs its fsverity_info and it will no longer be accessed via that inode. However, this is broken and can cause a use-after-free for concurrent __fsverity_get_info() for *different* inodes. Those rely on following fsverity_info::rhash_head in the rhashtable under rcu_read_lock() only. They also use fsverity_info::inode to do the key comparison. Fix this by RCU-delaying the freeing of 'struct fsverity_info' after it's been removed from the rhashtable.
-
CVE-2025-54503
Improper handling of overlap between protected memory ranges in the Secure Encrypted Virtualization (SEV) firmware could allow a privileged attacker to cause misconfigurations in the RMP potentially resulting in loss of integrity.
-
CVE-2026-120757
HDF5 through 2.2.0 contains a heap buffer over-read vulnerability in H5L__extern_traverse() in src/H5Lexternal.c, the default traversal callback for external links. The callback locates the target file name and object path within the link’s user data using strlen() without validating the buffer against its stored size (udata_size, which was marked unused). A crafted HDF5 file containing an external link whose data is not NULL-terminated, or is too short to hold both strings, causes strlen() to read past the end of the udata heap buffer, and the derived object path pointer may also point outside the buffer. The overrun is unbounded and continues until a zero byte is found. The flaw is triggered when the malicious link is traversed, for example when opening an object through it. An attacker who can get a user or application to access a crafted file can cause a denial of service, and adjacent heap contents may be incorporated into the external file name or object path the library attempts to open.
-
CVE-2026-118608
Alpine iLX-F511 libanwbtstack.so prh_rfcomm_cc_process_test Out-Of-Bounds Read Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of Alpine iLX-F511 devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability. The specific flaw exists within the prh_rfcomm_cc_process_test function. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-29018.
-
CVE-2026-116502
A flaw has been found in turboderp-org ExLlamaV2 up to 0.3.2. The impacted element is the function QMatrix::make_sequential of the file exllamav2/exllamav2_ext/cuda/q_matrix.cu of the component GPTQ Index Handler. Executing a manipulation of the argument g_idx can lead to out-of-bounds write. The attack needs to be launched locally. The project was informed of the problem early through an issue report but has not responded yet.
-
CVE-2026-113935
An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination.
-
CVE-2026-130670
ImageMagick before 7.1.2-35 contains a heap buffer over-read vulnerability that allows attackers to read beyond allocated memory when BGRO image data is imported. Attackers can supply crafted BGRO data for processing to crash the application or leak adjacent heap memory contents.
-
CVE-2026-130660
ImageMagick before 7.1.2-35 contains a heap buffer over-read vulnerability in the MVG decoder that allows attackers to read out-of-bounds memory by supplying a crafted file. Attackers can provide a malicious MVG file for processing to trigger the over-read, causing application crashes or exposure of heap memory contents.
-
CVE-2026-130652
ImageMagick before 7.1.2-35 contains a heap buffer over-read vulnerability that allows attackers to read beyond allocated heap memory by triggering the -copy operation. Attackers can supply crafted images or arguments processed with -copy to crash the application or disclose adjacent heap memory contents.
-
CVE-2026-126841
Out of bounds read in Skia in Google Chrome prior to 157.0.8103.78 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High)
A list of CVEs whose flaw type is memory safety, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.