Memory safety CVEs.
Published CVEs classified as memory safety, ranked by exploit odds.
-
CVE-2026-82945
SOEM version 2.0.0 and earlier contains a vulnerability during device configuration where a malicious device can cause memory corruption. The software writes configuration data to a fixed-size array without checking if the array index exceeds its maximum size of EC_MAXFMMU entries. A device presenting more than EC_MAXFMMU configuration blocks can force writes beyond the array boundary, corrupting adjacent memory structures and potentially disrupting subsequent operations.
-
CVE-2026-82946
SOEM version 2.0.0 and earlier contains a vulnerability where a malicious device can crash the master system. When the software receives an error response, it clears an internal pointer but continues processing. If another message arrives before timeout, the software attempts to use the cleared pointer, causing a crash. An attacker can trigger this with a simple sequence of two messages.
-
CVE-2026-99754
In the Linux kernel, the following vulnerability has been resolved: scsi: target: Verify the iSCSI ISID is null-terminated iscsi_parse_pr_out_transport_id() returns the ISID of a FORMAT CODE 01b TransportID as a pointer into the PERSISTENT RESERVE OUT parameter list, lowercased in place and never null-terminated. spc4r37 Table 508 requires the field to be null-terminated, but a non-conforming initiator can omit the NULL; when the ISID ends at the end of the received buffer, the pointer is not a C string. The registration code still consumes it as one: strcmp() in __core_scsi3_locate_pr_reg() and in the REGISTER AND MOVE path, and snprintf("%s") in __core_scsi3_do_alloc_registration(), which also reads its first 8 bytes unconditionally with get_unaligned_be64() - a NUL check does not bound that read. When the parameter list spans more than one page, transport_kmap_data_sg() maps it with vmap(), and the over-read walks off the end of the mapping into the vmalloc() guard page and oopses. Reproduced with a PR OUT REGISTER + SPEC_I_PT parameter list of exactly 8192 bytes whose final TransportID carries a 12-byte ISID without a terminating NUL: BUG: unable to handle page fault for address: ffffc9000138c000 RIP: 0010:strcmp+0xc/0x30 Call Trace: __core_scsi3_locate_pr_reg+0xd3/0x120 [target_core_mod] core_scsi3_decode_spec_i_port+0x8fc/0x13a0 [target_core_mod] core_scsi3_emulate_pro_register+0x73c/0x900 [target_core_mod] ... iscsi_target_rx_thread+0xef/0x1d0 [iscsi_target_mod] With a single-page parameter list the buffer is a kmap() direct mapping, so the over-read continues into the physically adjacent page instead of faulting. snprintf("%s") then copies whatever follows the ISID in memory into pr_reg_isid, and PR IN READ FULL STATUS reports the registration back to any initiator, turning the over-read into an info leak of kernel heap contents. Reproduced with a 4096-byte parameter list whose last TransportID ends at the end of the buffer with a 4-byte ISID and no NUL, interleaved with I/O to populate adjacent pages: the READ FULL STATUS response returned the ISID as "0xleak" followed by raw bytes that were not part of the parameter list. The snprintf() into pr_reg_isid[PR_REG_ISID_LEN] caps the echoed ISID at 15 characters, so at most 11 bytes past the buffer are leaked per command, but the PR OUT command is not rate limited. Any initiator that can send PR OUT to an iSCSI-exported LUN can trigger either variant, including a guest via vhost-scsi. Require 8 bytes to remain after the ",i,0x" separator, and a NUL inside the rest of the descriptor, before the ISID pointer is returned. REGISTER AND MOVE fails with TCM_INVALID_PARAMETER_LIST; on SPEC_I_PT no target port claims the malformed TransportID, and the command fails the same way.
-
CVE-2026-99755
In the Linux kernel, the following vulnerability has been resolved: ptp: fix use-after-free in extts_fifo_show() reading tsevqs unlocked extts_fifo_show() walks ptp->tsevqs with list_count_nodes() and then list_first_entry() without holding ptp->tsevqs_lock, the spinlock that "protects tsevqs from concurrent access". Every other accessor of the list honours it: ptp_open() (list_add_tail), ptp_release() (list_del followed by kfree of the per-fd queue), ptp_clock_release() and ptp_clock_event() all take tsevqs_lock. extts_fifo_show() is the only one that does not. A per-fd timestamp queue is appended to tsevqs on open("/dev/ptpN") and removed and freed on close(), both under tsevqs_lock: scoped_guard(spinlock_irq, &ptp->tsevqs_lock) list_del(&queue->qlist); bitmap_free(queue->mask); kfree(queue); So a read of /sys/class/ptp/ptpN/fifo running concurrently with a close() of a /dev/ptpN fd can have list_count_nodes() walk into the queue that close() is removing and freeing, dereferencing freed memory (use-after-free) or a poisoned list pointer. Take tsevqs_lock around the list walk. The fifo only ever draws from the first queue, which is the registration-time queue created in ptp_clock_register() and freed only in ptp_clock_release(); that cannot run while the sysfs attribute is being read, so the dequeue from queue->buf under queue->lock may stay outside tsevqs_lock and the lock order is unchanged.
-
CVE-2026-99725
In the Linux kernel, the following vulnerability has been resolved: cipso: fix optlen corruption in cipso_v4_delopt() cipso_v4_delopt() recomputes the option length by walking the option buffer after the CIPSO option has been moved out. The walk then reads the stale bytes at the tail of the buffer as option data, and a crafted setsockopt(IP_OPTIONS) buffer can make it treat one of them as an option length, increasing opt->opt.optlen beyond the valid option data. The corrupted length stays on the socket and is later used as the copy length by getsockopt(IP_OPTIONS) and by the udp/raw/ping sendmsg paths, where it exceeds the size of the buffers they copy into. Compute the new length from the intact options before the move and subtract the CIPSO length, and fill the padding with IPOPT_END.
-
CVE-2026-99717
In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) Add missing NULL pointer check When CONFIG_DEBUG_FS is enabled and per-client PMBus debugfs directory creation fails during pmbus_do_probe(), q54sj108a2_probe() passes the NULL pointer returned by pmbus_get_debugfs_dir() to debugfs_create_dir() without validation, creating its debugfs directory at the debugfs root instead of under the client directory. If pmbus_init_debugfs() fails to create the client directory, data->debugfs is left as NULL or an ERR_PTR, which pmbus_get_debugfs_dir() converts to NULL. Passing a NULL parent to debugfs_create_dir() places q54sj108a2_dir in the root of the debugfs filesystem and populates it with attribute files whose private data pointers reference psu->debugfs_entries. Because this root-level directory is outside the client debugfs hierarchy, PMBus core cleanup does not remove it on device unbind, leaking the debugfs entries and causing a use-after-free of the devm-allocated struct q54sj108a2_data if the orphaned files are accessed via q54sj108a2_debugfs_read() or q54sj108a2_debugfs_write() after device removal. Fix the problem by adding the missing NULL pointer check.
-
CVE-2026-99718
In the Linux kernel, the following vulnerability has been resolved: hwmon: (peci/dimmtemp) Fix devres leak and UAF on concurrent unbind When a peci_dimmtemp device is unbound concurrently with its delayed initialization work (detect_work), newly allocated devm resources and the hwmon device are leaked, leading to a use-after-free when reading the lingering hwmon sysfs attributes. In peci_dimmtemp_probe(), detect_work is registered for cancellation via devm_delayed_work_autocancel(). During driver detach, devres_release_all() first moves all existing entries from dev->devres_head onto a local todo list before invoking their release callbacks in reverse order. If create_dimm_temp_info_delayed() is already running when devm_delayed_work_drop() calls cancel_delayed_work_sync(), create_dimm_temp_info() can allocate dimmtemp_label strings via devm_kzalloc()/devm_kasprintf() and register the hwmon device via devm_hwmon_device_register_with_info(), appending new devres entries to the now-empty dev->devres_head. Once the work finishes, devres_release_all() frees priv and priv->name from the local todo list without re-evaluating dev->devres_head, leaving the late devres allocations and registered hwmon device behind with a dangling priv pointer. Cancel detect_work synchronously in a driver .remove() callback instead of relying on devm_delayed_work_autocancel() so that the work is fully drained before devres_release_all() detaches dev->devres_head, allowing any devm resources registered by the delayed work to be released in proper reverse order. Also only schedule detect_work when check_populated_dimms() returns -EAGAIN so that probe failure paths do not leave delayed work pending.
-
CVE-2026-99721
In the Linux kernel, the following vulnerability has been resolved: hwmon: (aquacomputer_d5next) reject short status reports The HID raw_event callback runs before HID core validates the received report length. aqc_raw_event() reads device-specific status fields at fixed offsets, including multi-byte values, without first ensuring that the received buffer contains every field. A truncated report can therefore cause out-of-bounds reads and update hwmon state with unrelated data. The required length differs between supported devices and cannot be derived from the HID report descriptor. Define the minimum length needed by each asynchronous status format, select it while configuring the device, and reject reports that do not contain the last field accessed by that format. Keep the published length zero until probe configuration is complete, which also excludes legacy devices whose status is retrieved through feature reports.
-
CVE-2026-99697
In the Linux kernel, the following vulnerability has been resolved: mm: memcontrol: fix NULL pointer deref and UAF from high_work_func() on dying memcg When memory.high is exceeded in non-task context, try_charge_memcg() schedules memcg->high_work without taking a reference on the memcg, and high_work_func() invokes reclaim_high() without pinning the memcg. With obj_cgroup reparenting, introduced in commit bf4f059954dc ("mm: memcg/slab: obj_cgroup API"), objects charged to a child memcg are reparented to its parent in mem_cgroup_css_offline() instead of holding a reference on the child until uncharged. Subsequent uncharges of those objects go to the parent, which can leave the child's memory use permanently above its high limit, so any later charge on the offlined memcg in non-task context schedules high_work. This was later widened from kernel memory to LRU folios when commit f1cf8d2f36dc ("mm: memcontrol: eliminate the problem of dying memory cgroup for LRU folios") converted LRU folios to use obj_cgroup reparenting. cancel_work_sync(&memcg->high_work) only runs at the end of teardown in mem_cgroup_css_free(), so high_work_func() can start or still be running reclaim_high() after mem_cgroup_css_released() or shrink_many() has called lru_gen_release_memcg() and unhashed lruvec->lrugen.list. If reclaim tries to rotate the memcg, lru_gen_rotate_memcg() dereferences a NULL pprev pointer. This issue is specific to MGLRU and was introduced with the memcg LRU in commit e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists"). With either traditional LRU or MGLRU, css_free_rwork_fn() calls css_rstat_exit() which frees per-CPU rstat data before calling mem_cgroup_css_free(). If reclaim_high() is still running, rstat updates via mod_lruvec_state() -> __css_rstat_updated() cause a use-after-free on the per-CPU rstat data. This was introduced when commit 5da3bfa029d6 ("cgroup: use separate rstat trees for each subsystem") moved css_rstat_exit() ahead of ss->css_free(). Fix both problems by acquiring a reference with css_tryget_online() in high_work_func() before calling reclaim_high(), and by resetting memory.high and swap.high to PAGE_COUNTER_MAX in mem_cgroup_css_offline() so that charges via references on an offlined memcg do not trigger high_work on the dead child and skip checking live ancestors in try_charge_memcg(). Acquiring the reference in high_work_func() rather than before scheduling high_work is safe because mem_cgroup_css_free() calls irq_work_sync() and cancel_work_sync() which cancels pending work and waits for an already running high_work_func() to complete before mem_cgroup_free() frees the memcg. css_tryget_online() uses percpu_ref_tryget_live() and is safe to call after percpu_ref_exit() before the cgroup is freed unlike css_tryget(). Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 27 Comm: kworker/1:0 Tainted: G B W 7.3.0-rc5-g2bba28e98578 #284 PREEMPT(full) Tainted: [B]=BAD_PAGE, [W]=WARN <-- Taint from lru_gen_rotate_memcg() VM_WARN_ON_ONCE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events high_work_func RIP: 0010:lru_gen_rotate_memcg+0x1a3/0xe90 Call Trace: <TASK> ? read_ctrl_pos+0x22f/0x3f0 shrink_lruvec+0x16cb/0x1b80 ? ret_from_fork_asm+0x1a/0x30 ? lapic_next_event+0x15/0x20 ? clockevents_program_event+0x2bb/0x6f0 ? lapic_next_event+0x15/0x20 ? __pfx_shrink_lruvec+0x10/0x10 ? __pfx_clockevents_program_event+0x10/0x10 ? _raw_spin_lock+0x84/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? kasan_save_stack+0x30/0x50 ? psi_group_change+0x381/0x740 ? __pfx_sched_clock_cpu+0x10/0x10 ? save_fpregs_to_fpstate+0xc4/0x2c0 ? finish_task_switch.isra.0+0x1de/0xac0 ? __schedule+0xf62/0x42c0 ? __pfx___schedule+0x10/0x10 ? __pfx___irq_work_queue_lo ---truncated---
-
CVE-2026-99691
In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: unlink socket containers before releasing resources A socket container's node and socket must remain alive while the container is on sock_containers. The debugfs formatter reads sc_node and sc_sock under o2net_debug_lock without taking their references, but sc_kref_release() releases both before taking that lock to unlink the container. With CONFIG_DEBUG_FS enabled, a synchronous sender can retain its last socket-container reference after o2net_disconnect_node() has detached the connection and flushed o2net_wq. The caller runs outside that workqueue. After the sender removes its configfs dependency, node removal can proceed without waiting for the sender's final sc_put(): Sender (final sc_put) Configfs rmdir Debugfs reader -------------------- -------------- -------------- o2nm_undepend_item() Drop node item refs o2nm_node_put() [node can be freed] sc_seq_show() Lock debug lock Read sc_node->nd_name Unlock debug lock sc_node = NULL o2net_debug_del_sc() The earlier socket release has a similar window. The container is still selectable while its socket has been released and sc_sock has not yet been cleared: Sender (final sc_put) Debugfs reader -------------------- -------------- sock_release(sc->sc_sock) [socket can be freed] sc_seq_show() Lock debug lock Read sc_sock->sk fields Unlock debug lock sc_sock = NULL ... o2net_debug_del_sc() Move o2net_debug_del_sc() before releasing either resource. Unlinking under the existing debug lock waits for an active formatter to finish and prevents later readers from selecting the container. This covers both socket fields and node fields, including nd_num in the stats formatter. KASAN report as below: BUG: KASAN: slab-use-after-free in string+0x42b/0x470 Read of size 1 at addr ffff88810f56fc90 by task python3/506 CPU: 0 UID: 0 PID: 506 Comm: python3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 kasan_report+0xe0/0x110 string+0x42b/0x470 vsnprintf+0x330/0x1110 seq_printf+0x1a8/0x260 sc_seq_show+0x604/0x9f0 seq_read_iter+0x480/0x1110 seq_read+0x362/0x5a0 full_proxy_read+0x11f/0x180 vfs_read+0x1a0/0xc20 ksys_read+0x111/0x200 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f (User register dump omitted.) </TASK> Allocated by task 497: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 o2nm_node_group_make_item+0xea/0x1a0 configfs_mkdir+0x762/0xca0 vfs_mkdir+0x399/0x7e0 filename_mkdirat+0x129/0x450 __x64_sys_mkdir+0x70/0xa0 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 505: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 config_item_cleanup+0x14b/0x230 config_item_put+0x79/0x90 sc_put+0x454/0x6e0 o2net_send_message_vec+0x63d/0x1560 o2net_send_message+0xa6/0xe0 validation_send_write+0x17f/0x1d0 full_proxy_write+0x11f/0x180 vfs_write+0x25a/0x1010 ksys_write+ ---truncated---
-
CVE-2026-99694
In the Linux kernel, the following vulnerability has been resolved: ocfs2: do not index before the entry array when dividing an empty bucket ocfs2_divide_xattr_bucket() appends an empty bucket carrying a sentinel hash when the source bucket has no divide position, taking that hash from xh_entries[start - 1]. ocfs2_xattr_find_divide_pos() returns count when every entry shares one hash, and its loop does not run at all for count < 2, so an empty bucket comes back with start == count == 0 and the read is xh_entries[-1]. That is outside the __counted_by_le(xh_count) bounds of xh_entries[] and lands on the header, so the value picked up is xh_count | xh_free_start << 16. One above it is written into the new bucket's xh_entries[0] and committed, which leaves a bucket whose first hash does not follow the bucket before it. ocfs2_xattr_bucket_find() binary searches on xh_entries[0], so the broken key hides the range the sentinel was meant to cover: getxattr() answers -ENODATA for an attribute that is stored, and an insert can go to the wrong bucket and leave two copies of a name. The cross cluster divide hands the same value back as a tree record's e_cpos, which then claims a hash range it does not cover. Read xh_entries[0] instead. The branch is only reached when every entry shares one hash, so for a non-empty bucket it holds the same value, and for an empty one it is the slot that carries the bucket key. An empty bucket reaches the divide from ocfs2_check_xattr_bucket_collision(), which reports no collision for one, through ocfs2_add_new_xattr_bucket() and ocfs2_extend_xattr_bucket(). It does not take a failed set to get there: a divide that finds no position is itself what leaves an empty sentinel bucket behind, and a later extend can pick it as the target.
-
CVE-2026-99684
In the Linux kernel, the following vulnerability has been resolved: hwrng: virtio - prevent use-after-free after a failed restore remove_common() frees the driver data during freeze, but does not clear vdev->priv, which points to freed memory. If probe_common() then fails during restore, a later remove or freeze can dereference the dangling pointer. Clear vdev->priv on the probe_common() error cleanup path and before freeing the driver data in remove_common(). Also reset the device and return early from remove_common() if vdev->priv is already NULL for a safe teardown after a failed restore.
-
CVE-2026-99688
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: prevent aggregate self-replacement qfq_change_class() snapshots the current aggregate settings while holding the qdisc tree lock, but drops the lock before selecting the destination aggregate. During that gap, qfq_enqueue() can move the class to an aggregate matching the requested settings. When qfq_change_class() resumes, qfq_find_agg() then returns cl->agg. If it is a singleton, qfq_deact_rm_from_agg() frees the aggregate before qfq_add_to_agg() immediately accesses the same pointer, causing a use-after-free. While holding the tree lock, skip the replacement when the destination is already the current aggregate. Any estimator replacement has already completed, so the class change can finish normally.
-
CVE-2026-99689
In the Linux kernel, the following vulnerability has been resolved: xfs: fix temporary cursor leak in btree shift corruption paths In xfs_btree_lshift and xfs_btree_rshift, when XFS_IS_CORRUPT detects an invalid firstrec/lastrec result after xfs_btree_dup_cursor has successfully allocated a temporary cursor, the error path jumps to error0 which returns without freeing tcur. This leaks the cursor memory, the xfs_group reference, and the per-level buffer references held by the duplicated cursor. Jump to error1 instead, which calls xfs_btree_del_cursor(tcur, XFS_BTREE_ERROR) to properly release all resources.
-
CVE-2026-99661
In the Linux kernel, the following vulnerability has been resolved: mm/gup: check for overflow when converting nr_pages to bytes in GUP-fast The overflow check in gup_fast_fallback() only covers the addition to start. The preceding nr_pages << PAGE_SHIFT can already have truncated the length on 32bit. Users such as RapidIO's rio_dma_transfer() can derive such page counts from a 64-bit userspace length. Let's just check_shl_overflow() to reject any such overflow with -EOVERFLOW early.
-
CVE-2026-99662
In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast With nr_pages == 0, GUP-fast still enters its page table walk and can write past the caller's page array. The old end <= start check caught empty ranges, but was replaced with an overflow check. Users such as OrangeFS can pass a zero page count derived from a userspace-supplied length. So let's return zero for nr_pages == 0 before starting the walk, just like GUP-slow. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]
-
CVE-2026-99663
In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix clearing folios in memfd_pin_folios() memfd_pin_folios() pins folios obtained directly from the page cache without checking whether they are uptodate. However, shmem fallocate() can leave newly allocated folios uncleared and not uptodate. Callers such as udmabuf can then expose uninitialized memory to userspace. Clear non-uptodate folios and mark them uptodate under the folio lock before returning them to the caller. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description and comment ]
-
CVE-2026-99654
In the Linux kernel, the following vulnerability has been resolved: mm: fix unmap_mapping_range() beyond 4 GiB on 32-bit Commit 9eab0421fa94 ("mm: fix unmap_mapping_range high bits shift bug") made holebegin and holelen unsigned before they are shifted, by casting them to pgoff_t. That is an unsigned long: on a 32-bit kernel the cast cuts off the upper half of the two loff_t values, so a hole which begins at 4 GiB or beyond is taken for one in the first 4 GiB of the file. truncate_pagecache() passes the new size of the file and asks for private COWed pages to be unmapped as well. If a file of 6 GiB is truncated to 5 GiB, everything from 1 GiB on is unmapped, and what a process has written to a private mapping of the range between 1 GiB and 5 GiB is lost: it reads the contents of the file again. Where the range has an end, the wrong range is unmapped instead of the right one. The page cache copes with that, as it unmaps every folio that it removes. The callers which only have unmap_mapping_range() to get rid of user mappings do not, for example drm_vma_node_unmap(), whose fake offsets reach beyond 4 GiB on 32-bit, and revoke_iomem() with physical addresses of more than 32 bits. Cast to u64 instead. Nothing changes for 64-bit kernels. Fix generated by an LLM and sent by Josef Bacik in private.
-
CVE-2026-99642
In the Linux kernel, the following vulnerability has been resolved: mm/gup: check folio->mapping under folio lock in memfd_pin_folios() memfd_pin_folios() pins folios from the page cache without taking the folio lock. khugepaged or MADV_COLLAPSE can therefore replace a folio after checking its refcount while memfd_pin_folios() still pins the old folio. The caller then receives a folio which is no longer part of the memfd. For udmabuf and iommufd, this can cause data corruption: DMA accesses the detached folio rather than the live memfd contents. DMA reads can return stale data, while DMA writes update the detached copy and are lost from the live memfd. The detached folio remains pinned, so these accesses do not constitute a use-after-free or target another application's memory. For memfd live update, the stale contents can reappear in the memfd after handover. Lock the folio and recheck folio->mapping before pinning it, like other page cache users do. If the folio was removed, retry the folio lookup from the index that was removed.
-
CVE-2026-99596
In the Linux kernel, the following vulnerability has been resolved: nvme: wait for SRCU readers before splicing the namespace list Readers walk ctrl->namespaces under ctrl->srcu, and some of them sleep there, e.g. nvme_wait_freeze() waiting for I/O to drain. nvme_remove_namespaces() moves the list onto its on-stack ns_list with list_splice_init_rcu(), which only waits for RCU readers before relinking the entries. A reader still on the last namespace then follows its next pointer to ns_list instead of ctrl->namespaces and treats the stack as a namespace. Deleting a controller while a Format NVM passthrough waits for a delayed read on the last namespace gives: BUG: KASAN: stack-out-of-bounds in nvme_wait_freeze+0x102/0x120 Read of size 8 at addr ff110001d2f3fc38 by task nvme/4413 Call Trace: nvme_wait_freeze nvme_passthru_start nvme_submit_user_cmd nvme_user_cmd nvme_dev_ioctl BUG: unable to handle page fault for address: ffffffff8af04850 Use list_splice_init_srcu() instead, which waits for the SRCU readers. This also takes the RCU grace period out of every controller deletion. Deleting 64 tcp controllers with one namespace each, median of 3 runs on each of two boots per kernel: before after nvme disconnect-all (ms) 3491 / 3509 2996 / 3165 nvme_remove_namespaces() avg (ms) 39.0 / 40.5 31.9 / 34.7
-
CVE-2026-99599
In the Linux kernel, the following vulnerability has been resolved: udf: don't use eloc after the end of the unallocated space table When udf_next_aext() returns 0, its eloc, elen and etype outputs hold no defined value. Two walks of the unallocated space table still use eloc after the walk has reached the end of the table. udf_table_prealloc_blocks() looks for a free extent starting at first_block and decides whether it found one by comparing eloc with first_block after the walk. If the table's list ends in a continuation descriptor that leads to an empty allocation extent, eloc is then the block of that allocation extent, which is in use, and if that is first_block, the block is handed out as preallocation. Once udf_discard_prealloc() no longer frees the wrong block, this is what still makes fsx in generic/091 and generic/263 read back bad data on a table, in about one run in four. Only take the extent if the walk stopped at it. When udf_table_free_blocks() cannot merge the freed blocks into an existing extent, it appends a new one and sets only its block number, so the partition reference comes from whatever eloc held after the walk, and with long allocation descriptors it is written to disk. For a table without extents, eloc was never set. Take the partition reference from the freed blocks instead. Short allocation descriptors do not store the partition reference, which is why this half remains a latent long-descriptor fix rather than a reproduced failure.
-
CVE-2026-99591
In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Force device table to maximum size IOMMU can perform out-of-bounds read of the device table entry (DTE) that is adjacent to the last DTE and falls outside the device table. For example, if the device table can hold 0 to N-1 entries, then the IOMMU can be made to fetch the Nth entry, which falls outside the device table. The device table is owned by the hypervisor (HV) and is assigned in 4KB pages that are contiguous in system physical address (SPA). If the out-of-bound DTE falls on a guest-owned page, then the guest can exploit this bug to setup malicious table walks to corrupt HV pages and/or bring down the system. Note that this bug does not manifest when the device table size is set to its maximum size of 2MB. Therefore, force the device table size to the maximum 2MB on affected processors. These are CPU family 0x17 (Zen1/Zen2) through family 0x1a (Zen5/BRH). This is a mitigation for CVE-2024-21963. kdump reuses the previous kernel's device table only when the size encoded in the IOMMU device-table register matches pci_seg->dev_table_size. A mixed rollout disagrees: the unpatched kernel uses the IVRS-derived size and the patched kernel uses 2MB, so __reuse_device_table() rejects the table. On SNP-capable IOMMUs that rejection panics the kdump kernel. Kernels that both have this patch agree on 2MB and reuse succeeds. Update the production kernel and the crash kernel together.
-
CVE-2026-99568
In the Linux kernel, the following vulnerability has been resolved: iommufd/iova_bitmap: Ensure that iova_bitmap_set() handles the full IOVA Generally userspace is going to step the dirty bitmap through the IOVA space. However if the bitmap ends in the middle of a large PTE this is problematic. The first step will clear the dirty bit and report dirty to the end of its bitmap while the second step will see the clear'd dirty and report clean for the start of the bitmap. If it happens this ends up losing dirties. Further this function is missing bounds checking so if this does happen ther is a good chance it will write memory beyond what the userspace was expecting. Return an error code if this illegal condition happens.
-
CVE-2026-99540
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix parent dentry lifetime in directory enumeration ksmbd_populate_dot_dotdot_entries() builds the ".." entry from the open directory's d_parent and passes that pointer to ksmbd_vfs_fill_dentry_attrs() without taking a reference. That pointer is only valid while the directory stays under this parent. If a concurrent rename moves the directory elsewhere, the old parent loses its last reference; a following rmdir then turns it into a negative dentry with d_inode cleared, and after the RCU grace period the dentry itself is freed. The worker still holds the raw pointer and dereferences d_inode through vfs_getattr() and vfs_getxattr(). A remote SMB client, authenticated or guest, triggers this by listing a directory while that directory is moved under a new parent and the old parent is deleted. It can be done by the client itself with write access or by other concurrent writers, triggering null-ptr-deref and slab-use-after-free on a KASAN build. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:xattr_permission+0x9d/0x160 Call Trace: vfs_getxattr+0x9c/0x1b0 ksmbd_vfs_getxattr+0x82/0x100 ksmbd_vfs_get_dos_attrib_xattr+0x7f/0x130 ksmbd_vfs_fill_dentry_attrs+0x435/0x650 ksmbd_populate_dot_dotdot_entries+0x25e/0x630 smb2_query_dir+0xcf9/0x1a20 handle_ksmbd_work+0x5f1/0x1c80 process_one_work+0x90b/0x19d0 Fix by using the dentry reference counting APIs: take the parent with dget_parent(), take a matching dget() on ".", and dput() the dentry once ksmbd_vfs_fill_dentry_attrs() has returned or the pattern does not match.
-
CVE-2026-99541
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix OOB read and cross-share confusion in ksmbd_validate_name_reconnect() ksmbd_validate_name_reconnect() indexes ab_pathname[share->path_sz + 1] without checking that the path is longer than share->path_sz + 1 (d_path() fills the buffer from the end). A durable fp is not bound to its original share, so a client can preserve a file from a short-path share and reconnect it on a long-path share, making strcmp() read past the PATH_MAX buffer - with a long enough share path this oopses the kernel, and on a mapped page it also gives a byte-equality oracle on adjacent heap (the reconnect succeeds exactly when the out-of-bounds string equals the requested name). A same-share variant with the durable fp at the share root reads 1 byte past the buffer (strlen(ab_pathname) == share->path_sz). Check before comparing: the path must be longer than share->path_sz, it must start with share->path, and the next character must be '/'. The share root itself is accepted only for an empty name.
-
CVE-2026-99532
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate security descriptor offsets before pointer arithmetic parse_sec_desc() constructs SID and DACL pointers by adding untrusted 32-bit offsets to the security descriptor before checking their bounds. The existing checks reject offsets into the descriptor header, but do not reject offsets beyond the descriptor's length. On a 32-bit kernel, a large offset can wrap the pointer before the descriptor. The end-only checks in parse_sid() and parse_dacl() can then accept it, allowing an authenticated SMB2 SET_INFO request to access memory outside the security descriptor and fault the kernel. Check each nonzero offset against acl_len before constructing its pointer. Initialize the optional owner and group SID pointers to NULL so an omitted SID remains absent when parsing the DACL.
-
CVE-2026-99525
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free in cifs_ses_add_channel() The error path of cifs_ses_add_channel() calls cifs_put_tcp_session() before cifs_chan_clear_need_reconnect(). The latter reaches cifs_ses_get_chan_index(), which dereferences server->terminate; if the put was the final reference, TCP_Server_Info is already freed and this is a use-after-free. Same put-then-use pattern as the recently fixed sibling in commit 717e0a25036b ("cifs: Fix server use-after-free in cifs_chan_skip_or_disable()"). Move the put last, but do not read chan->server after dropping chan_lock: chan points into ses->chans[], and once chan_count is decremented a concurrent add_channel can reuse the slot and overwrite the pointer, so the put would act on the new channel's server. Cache the pointer under chan_lock, clear the reconnect bit and decrement chan_count while still holding the reference, and release it after the unlock. This issue was discovered by Tencent CodeBuddy Security.
-
CVE-2026-99526
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free infoleak via the readdir resume name CIFSFindNext() copies the resume name that cifs_save_resume_key() recorded from the last entry of the previous response into its request; psrch_inf->presume_name points into the response buffer that entry came from, and nothing ever clears it. find_cifs_entry() records a new name only from a response with a usable last entry, and cifs_readdir() only from an entry it walks to, so a response that carries no entries and leaves last_entry NULL, because CIFSFindFirst() or CIFSFindNext() rejected LastNameOffset, refreshes neither and presume_name keeps pointing into the previous response. That buffer has already been released: by CIFSFindNext() before it installs the new response, or by find_cifs_entry() when it rewinds the search, which does not drop the name either and can then fail in initiate_cifs_search() before a new response replaces it. The next CIFSFindNext() then copies up to PATH_MAX - 1 bytes of the resume name out of the released buffer into its request and sends them to the server: a use-after-free read that leaks kernel memory to a malicious or compromised server, which can provoke it with a single FindNext response that carries no entries and a LastNameOffset above CIFSMaxBufSize, which is all the existing check rejects. With KASAN enabled, a server that answers a listing that way gives: CIFS: VFS: ignoring corrupt resume name ================================================================== BUG: KASAN: slab-use-after-free in CIFSFindNext+0x8ca/0x14c0 Read of size 4080 at addr ffff88807c823f98 by task ls/83 CPU: 0 UID: 0 PID: 83 Comm: ls Tainted: G B 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Tainted: [B]=BAD_PAGE Call Trace: <TASK> kasan_report+0xdf/0x1a0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 CIFSFindNext+0x8ca/0x14c0 cifs_readdir+0xf51/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 1 at 13.497119s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 Freed by task 83 on cpu 0 at 13.584018s: cifs_buf_release+0x41/0x80 CIFSFindNext+0xfce/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address is located 16280 bytes inside of freed 16588-byte region [ffff88807c820000, ffff88807c8240cc) ================================================================== The same memcpy() first reads past the end of that object while it is still live, a slab-out-of-bounds read that the following patches bound; that is the taint the report above carries. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Clear presume_name and resume_name_len whenever a new response is installed and when the rewind path releases the search buffer, so that the name never outlives the buffer it points into, and reset resume_key with them, since it was taken from the same entry and would otherwise be sent with an empty name. A response without a usable last entry then continues the search with an empty resume name rather than a stale one; CIFSFindNext() skips the copy of a zero-length name so that it never runs on the NULL pointer. The next patch in the series leaves last_entry NULL for a response that carries no entries, and bounds LastNameOffset against the received response rather than against CIFSMaxBufSize. Responses that are given a last entry today then take the path fixed here, so that patch must not be applied without this one.
-
CVE-2026-99528
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix netns use-after-free in write_gssp() While fuzzing with a customized syzkaller, I hit a refcount warning in xprt_alloc(), reached from a write to /proc/net/rpc/use-gss-proxy: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0xf8/0x120 CPU: 0 PID: 10404 Comm: syz.0.17 Not tainted 7.3.0-rc1-00096-gcfebfd3db73d Call Trace: <TASK> xprt_alloc+0x83f/0x9d0 xs_setup_xprt+0xaf/0x3c0 xs_setup_local+0x47/0x7f0 xprt_create_transport+0x16c/0x730 rpc_create+0x38e/0x7f0 gssp_rpc_create+0xe2/0x180 set_gssp_clnt+0xba/0x1b0 write_gssp+0x200/0x310 proc_reg_write+0x240/0x330 vfs_write+0x2aa/0x1050 ksys_write+0x12a/0x250 do_syscall_64+0x117/0x750 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> create_use_gss_proxy_proc_entry() stores the struct net pointer as the proc entry's private data without taking a reference on it, and an open file descriptor does not pin the namespace either, as procfs only pins the proc_dir_entry. write_gssp() reads that pointer back with pde_data() and hands it to set_gssp_clnt(), which reaches xprt_init(): xprt->xprt_net = get_net_track(net, &xprt->ns_tracker, GFP_KERNEL); get_net_track() -> get_net() -> refcount_inc() is unconditional, so rpc_create() assumes its caller holds a reference on args.net. write_gssp() does not. Dropping the last ns.count reference does not make the file go away. __put_net() only queues cleanup_net() on a workqueue, and the remove_proc_entry() that fences off further writes runs from the rpcsec_gss pernet .exit method, that is, from inside cleanup_net(). A write landing between those two points increments a refcount that is already zero. cleanup_net() does not re-read ns.count, so the namespace is freed anyway and the rpc_xprt -- along with the AF_LOCAL socket opened for it -- is left pointing at freed memory. The resurrected count is visible to the rest of that teardown too: with CONFIG_IPV6_MROUTE the same cleanup_net() worker then trips !mr_can_free_table() in ip6mr_free_table(), which tests check_net() on the namespace it is freeing. It reduces to opening /proc/net/rpc/use-gss-proxy inside a new network namespace, calling setns() back to the original one to drop the last reference, and then writing "1" to the still-open descriptor. Take the reference in write_gssp() itself and refuse the write when the namespace is already gone. This is what procfs does for every other /proc/net file: get_proc_net() is maybe_get_net(PDE_NET(PDE(inode))) and seq_open_net() returns -ENXIO when it fails. PDE_NET() cannot be reused here because the parent directory /proc/net/rpc carries no namespace pointer. Adding a .pre_exit to rpcsec_gss_net_ops so the entry is removed earlier would only narrow the window, since pre_exit also runs from cleanup_net(). Live namespaces are unaffected: a write still returns the error from set_gssp_clnt(), a write of "2" still returns -EINVAL, and reads are untouched.
-
CVE-2026-99529
In the Linux kernel, the following vulnerability has been resolved: wifi: b43: fix use-after-free in b43_bcma_remove() b43_one_core_detach() frees the struct b43_wldev it is given the bus device of. b43_bcma_remove() then reads wldev->dev again to free the bus device, which is a read of freed memory. b43_ssb_remove() does not have the problem: it takes a copy of wldev->dev at the start. Do the same here.
-
CVE-2026-99516
In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: fix use-after-free in nvmet_fc_ls_create_connection() nvmet_fc_ls_create_connection() looks up the association with nvmet_fc_find_target_assoc(), which returns it with a reference held, and drops that reference as soon as the target queue has been allocated. iod->assoc is then dereferenced again by nvmet_fc_makeconnid() while building the connection id. The queue only borrows the pointer and takes no reference of its own. Once the lookup reference is dropped the association is kept alive solely by the reference taken when it was created, so a disconnect LS or a remote port unregister running concurrently can free it before nvmet_fc_makeconnid() reads it: BUG: KASAN: slab-use-after-free in nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:193 drivers/nvme/target/fc.c:1841 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021) Read of size 8 at addr ffff888179f1b000 by task kworker/u9:2/1167 Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nvmet-wq nvmet_fc_handle_ls_rqst_work Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:193 drivers/nvme/target/fc.c:1841 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021) process_scheduled_works (kernel/workqueue.c:3322 kernel/workqueue.c:3405) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (archkernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Freed by task 1167 on cpu 0 at 405.998150s: kasan_save_track (mm/kasan/common.c:57 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (include/linux/kasan.h:235 mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:1808 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021) process_scheduled_works (kernel/workqueue.c:3322 kernel/workqueue.c:3405) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (archkernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address belongs to the object at ffff888179f1b000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 0 bytes inside of freed 2048-byte region [ffff888179f1b000, ffff888179f1b800) Hold the lookup reference until the response has been built, and drop it on the error path as well.
-
CVE-2026-99521
In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in mport_mm_close() A use-after-free vulnerability was identified in mport_mm_close() in drivers/rapidio/devices/rio_mport_cdev.c, identical to the pattern previously addressed in dma_req_free(). This is observable from userspace when an application creates an mmap mapping via the RapidIO character device and subsequently unmaps it (or terminates, triggering exit_mmap()). During munmap, mport_mm_close() is invoked and drops the mapping reference via kref_put(). If kref_put() drops the last reference, mport_release_mapping() is called, which frees the underlying rio_mport_mapping structure. The subsequent mutex_unlock() then dereferences map->md to unlock buf_mutex, leading to a use-after-free: mport_mm_close() -> mutex_lock(&map->md->buf_mutex); ... -> kref_put(&map->ref, mport_release_mapping); /* map is freed */ -> mutex_unlock(&map->md->buf_mutex); /* UAF: map used */ Fix this by caching map->md before kref_put() and using the cached pointer for mutex unlocking, ensuring that freed memory is not accessed.
-
CVE-2026-99515
In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix event queue release use-after-free iommufd_eventq_fops_release() drops the file's users reference before reading eventq->ictx. Once that reference is dropped, IOMMU_DESTROY in another thread can remove and free the event queue, so the later load accesses freed memory. Read ictx while the users reference still pins the event queue, then drop the reference and put the saved context. The context reference taken by iommufd_eventq_init() keeps ictx valid until the put. Fault and vEVENTQ file descriptors share this release path.
-
CVE-2026-99503
In the Linux kernel, the following vulnerability has been resolved: ata: sata_fsl: Fix use-after-free of host_priv on probe() failure sata_fsl_host_stop() releases hcr_base and host_priv: static void sata_fsl_host_stop(struct ata_host *host) { struct sata_fsl_host_priv *host_priv = host->private_data; iounmap(host_priv->hcr_base); kfree(host_priv); } ->host_stop() is called by the driver core through the ata_host_stop() devres action which ata_host_start() registers, so it is called both when the device is unbound and when probe() fails after the host has been started. The error_exit_with_cleanup label of sata_fsl_probe() releases hcr_base and host_priv as well, and it is reachable from the two device_create_file() calls which are done after the host has been activated. In that case sata_fsl_host_stop() runs on an already freed host_priv, resulting in a use-after-free and a double iounmap()/kfree(). Add a separate error label for the failures happening after the host has been activated, which only detaches the host and leaves hcr_base and host_priv to sata_fsl_host_stop(). Note that ata_host_detach() is dropped from error_exit_with_cleanup, as that label is now only reachable while host is still NULL.
-
CVE-2026-99505
In the Linux kernel, the following vulnerability has been resolved: apparmor: fix a use-after-free in aa_lookupn_ns() aa_lookupn_ns() takes a reference on the namespace it finds with aa_get_ns(), which is kref_get() on the reference count that the namespace is released through, without checking whether the namespace is still in use. A concurrent removal of a ":"-prefixed namespace looks the same namespace up and only then takes the parent lock to remove it, so the last reference can be dropped between the lookup and the aa_get_ns() call: the reference count then reports the increment on a zero count and the kernel classifies the following use of the object as a use-after-free. A user with CAP_MAC_ADMIN can trigger this by writing a ":<name>" removal and a ":<name>/<profile>" removal to /sys/kernel/security/apparmor/.remove concurrently. refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0xc0/0xe0, CPU#6 Call Trace: <TASK> aa_lookupn_ns+0xa9/0xc0 aa_remove_profiles+0x4fb/0x730 ? __kvmalloc_node_noprof+0x219/0x5c0 ? __pfx_aa_remove_profiles+0x10/0x10 ? aa_loaddata_alloc+0x65/0x1f0 ? _copy_from_user+0x2d/0x80 ? aa_loaddata_alloc+0x111/0x1f0 profile_remove+0x2ee/0x4a0 vfs_write+0x21e/0xcf0 ? rcu_core+0x29c/0x1740 ? timerqueue_linked_add+0x1f4/0x3d0 ? __pfx_vfs_write+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_rcu_core+0x10/0x10 ? __pfx_hrtimer_update_next_event+0x10/0x10 ? mutex_unlock+0x7b/0xd0 ? fdget_pos+0x24d/0x4b0 ksys_write+0xf7/0x1c0 ? __pfx_ksys_write+0x10/0x10 ? restore_fpregs_from_fpstate+0x37/0xc0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix by rejecting a namespace whose reference count is zero.
-
CVE-2026-99506
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix use-after-free of a new anon folio For a fault in a private mapping with nothing in the page cache, hugetlb_no_page() allocates a folio, locks it and maps it. The folio has one reference, which belongs to the page table entry from then on. After dropping the page table lock the function still sets the migratable flag of the folio and unlocks it. Whoever zaps the entry in between frees the folio. The fault holds the fault mutex and the lock of the vma. MADV_DONTNEED and the first unmap of a hole punch, hugetlb_vmdelete_list(), do not take the fault mutex, and a private vma only has a lock if it owns a reservation map: not with MAP_NORESERVE, and not in the child after fork(). Then the flag is set in, and folio_unlock() is called on, a folio that is free or has a new owner. A surplus page goes back to the page allocator while it is locked: BUG: Bad page state in process init pfn:108e00 flags: 0x200000000000059(locked|uptodate|dirty|head|node=0|zone=2) page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set A page of the pool can be given to the next user, of any file, who locks it and loses the lock to the late folio_unlock(): kernel BUG at mm/filemap.c:1532! hugetlb_no_page+0x111b/0x23e0 hugetlb_fault+0x3a9/0x14a0 An unprivileged process is enough: threads that write to a MAP_PRIVATE | MAP_NORESERVE hugetlb mapping, threads that call MADV_DONTNEED on it, and one that takes the freed pages for another file. Until commit 3a47c54f09c4 ("hugetlbfs: revert use i_mmap_rwsem for more pmd sharing synchronization") the fault held i_mmap_rwsem for reading, which everybody who zaps takes for writing. The lock that commit bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs") gave to private vmas closed the window again, but only for those with a reservation map. Be done with the folio before the page table lock is dropped, as hugetlb_wp() is with its copy. The function already unlocks page cache folios under that lock. Original fix generated by an LLM and sent in private by Josef. [[email protected]: simplify+move comment]
-
CVE-2026-99494
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix out-of-bounds ptr advance in cca_query_crypto_facility() The FQ reply parser code blindly advanced the walk pointer by a length value read directly from the hardware reply payload without checking that the advance stayed within the allocated reply buffer. A corrupt or malicious device response could push ptr beyond the cprbmem region, causing an out-of-bounds dereference or kernel memory exposure via the subsequent memcpy(). Fix this by tracking the remaining reply buffer space in a variable and validating each device-supplied length field against it before advancing or dereferencing the pointer.
-
CVE-2026-99483
In the Linux kernel, the following vulnerability has been resolved: ALSA: pcmtest: handle multiple wraps in random capture fill The random capture helpers assume that the data generated for one timer tick wraps the DMA ring at most once. However, b_rw describes 200 ms of audio because the timer runs at 5 Hz, so it can be several times larger than a small ring. For 48 kHz, S16_LE, four-channel capture with a 512-frame buffer, the DMA ring is 4096 bytes while one tick generates 76800 bytes. After filling the 4096-byte tail, the existing code issues a second 72704-byte write from the ring base, writing 68608 bytes beyond the ring. Both interleaved and non-interleaved capture are affected. KASAN reports the first write into the adjacent free page as a use-after-free in the random-byte generator. The underlying defect is an out-of-bounds write from the live DMA ring, not a stale DMA allocation. Split each random write repeatedly at the interleaved ring or per-channel block boundary. Keep the hardware-pointer update exactly once after the complete logical write. The issue reproduced on three of three clean boots. With this change, the same vulnerable geometry completed six times without a sanitizer finding. Boundary, pattern-fill, no-timer, open/close, and module-reload controls also completed normally. snd-pcmtest is a test driver, and selecting random fill requires an administrator-controlled module parameter. The written values come from the kernel random generator; no privilege escalation or attacker-controlled write primitive was demonstrated.
-
CVE-2026-99488
In the Linux kernel, the following vulnerability has been resolved: klist: avoid accesses after waking klist_remove() klist_remove() waits until a node is unreferenced so that its caller can free the containing object. klist_release() currently publishes waiter->woken and wakes the waiter before its final accesses to the waiter and node. klist_remove() can then return, allowing its stack waiter and the containing object to be freed or reused while klist_release() is still running. In particular, bus_remove_driver() can free drv->p while __device_attach() walks the same bus klist with bus_for_each_drv(). On an arm64 Cortex-A72 system, an unpatched 7.2.0-rc3 kernel with CONFIG_PREEMPT_RT=y and CONFIG_KASAN=y reproduced the bug through the in-tree I2C/at24 path. KASAN reported a use-after-free in klist_dec_and_del() reached from klist_next()/bus_for_each_drv() while at24 was being unregistered. Clear n_klist and take a task reference before publishing woken. Use release/acquire accesses for that publication and wake the referenced task. The task reference keeps the waiter task alive if it returns and exits before wake_up_process().
-
CVE-2026-99489
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Redesign shared sibling data lifecycle The Wacom driver coordinates state between sibling interfaces of the same physical device using a shared structure 'wacom_shared' inside 'wacom_hdev_data'. The driver kept a volatile representative pointer 'data->dev' pointing to a sibling 'hid_device' for physical path comparisons during sibling matching. This pointer management is fragile. When the representative device is disconnected, wacom_remove_shared_data() failed to clear/update 'data->dev', leading to a Use-After-Free vulnerability when subsequent sibling probes dereference the dangling 'data->dev' pointer. Resolve this issue by redesigning the sibling data lifecycle: - Eliminate the volatile 'data->dev' representative pointer completely - Redesign 'wacom_hdev_data' to store stable static copies of the required attributes upon first allocation: 'phys' path string, 'vendor', 'product' IDs and the sibling's 'device_type' - Use these static attributes for stable sibling matching in wacom_are_sibling() and wacom_get_hdev_data() This ensures sibling matching remains safe and stable even if individual siblings are dynamically added or removed. To secure the lifecycle against concurrent probe/disconnect races: - Switch kref_put() to kref_put_mutex() in wacom_remove_shared_data() to serialize refcount drops with list traversal and lookup - Modify wacom_release_shared_data() to assume the list lock is already held Also, do not accumulate the 'device_type' capability flag during subsequent sibling probes. Keeping only the first probed sibling's device_type exactly preserves the original sibling matching behavior without introducing side effects.
-
CVE-2026-99490
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_bamboo_pad wacom_bamboo_pad_pen_event() accesses wacom->shared->pen locklessly relative to wacom_remove_shared_data() which nullifies it. This can lead to a Use-After-Free if the sibling device is removed while events are being processed. Resolve this by introducing RCU protection for pen and touch pointers: - Annotate 'pen' and 'touch' in wacom_shared struct with __rcu. - Wrap lockless readers in wacom_bamboo_pad_pen_event() with rcu_read_lock() and rcu_dereference(). - Update writers in wacom_sys.c using rcu_assign_pointer(). - Use rcu_dereference_protected for comparisons under wacom_udev_list_lock. - Also use rcu_access_pointer in wacom_sibling_pending() and wacom_mode_change_work() to avoid warnings (while lockless access in the latter remains a pre-existing issue).
-
CVE-2026-99491
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_intuos_pad wacom_intuos_pad() accesses wacom->shared->touch_input locklessly inside the interrupt handler context. If the Touch sibling device is disconnected, wacom_remove_shared_data() clears 'touch_input' outside any lock, creating a Time-of-Check to Time-of-Use (TOCTOU) race condition where a preempted reader in interrupt context dereferences the freed pointer, leading to a Use-After-Free. Resolve this by introducing RCU protection for the touch_input pointer: - Annotate 'touch_input' in wacom_shared struct with __rcu - Wrap all lockless readers in wacom_wac.c with guard(rcu)() and rcu_dereference() using a unified wacom_report_touch_mute() helper - Update writers in wacom_sys.c using rcu_assign_pointer() - Call synchronize_rcu() in wacom_remove_shared_data() to ensure all active RCU readers have finished before the input device is freed Also wrap wacom_set_shared_values() and touch/pen assignments in wacom_add_shared_data() inside the wacom_udev_list_lock to serialize concurrent probe assignments, and verify that 'shared->touch == hdev' before setting touch_input to prevent concurrent sibling probe state desynchronization.
-
CVE-2026-99475
In the Linux kernel, the following vulnerability has been resolved: genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes When an interrupt thread exits abnormally via do_exit() (e.g. the interrupt handler oopses) without returning from irq_thread(), a concurrent call to free_irq() could free the irqaction before the irq_thread_dtor() exit task work runs. irq thread (oopsed) free_irq() ------------------- ---------- do_exit() exit_mm() complete_vfork_done() -------> kthread_stop() returns exit_files() ... kfree(action) exit_task_work() irq_thread_dtor() action->... <- use-after-free Track the pending exit work with the IRQTF_EXIT_WORK thread flag, and have __free_irq() wait for the bit to clear before kfree(). irq_thread_dtor() only runs on irq_thread abnormal exit. If that dtor also faults, free_irq() will hang indefinitely, but double IRQ thread faults require a reboot anyways. [ tglx: Add missing include ]
-
CVE-2026-99477
In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: pin mm_users in do_pagemap_scan() The PAGEMAP_SCAN ioctl takes mmap_read_lock() on an mm obtained from /proc/<pid>/pagemap without holding a reference to mm_users. proc_mem_open() deliberately grabs only mm_count, so a consumer that touches the address space has to call mmget_not_zero() first. Every other consumer in this file does -- m_start(), do_procmap_query(), show_smaps_rollup() and pagemap_read() -- but do_pagemap_scan() does not. Without that reference the target can reach exit_mmap() concurrently, and exit_mmap() calls unmap_vmas() while holding mmap_lock only for reading, which does not exclude the scanner. For ordinary VMAs this is harmless, as free_pgtables() and remove_vma() run afterwards under mmap_write_lock. A shared hugetlb VMA is different: __hugetlb_zap_end() frees the VMA's hugetlb_vma_lock inside the read-locked phase. walk_hugetlb_range() can therefore load vma->vm_private_data, have the lock freed underneath it, and then down_read() a freed rw_semaphore. The load happens before the freeing side clears the pointer, so this is a use-after-free and not a NULL dereference. Any unprivileged user can reach it with no huge pages configured, as hugetlb_reserve_pages() allocates the lock before the VM_NORESERVE early return. Pin mm_users across the scan, the way the other consumers do. mmput() from the exiting task can then no longer reach exit_mmap() while a walk is in progress. [[email protected]: remove unneeded & undesirable test for !mm]
-
CVE-2026-99480
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix TOCTOU race between GROUP_REGISTERED check and erase panthor_group_destroy() checks the GROUP_REGISTERED mark and then calls xa_erase() without holding the xarray lock across both. If the handle is destroyed by another thread in between, and a concurrent GROUP_CREATE reuses the freed ID, the first destroy erases and releases the new, still-initializing group, leading to a use-after-free in panthor_group_create(). Do the mark check and erase atomically under xa_lock().
-
CVE-2026-99469
In the Linux kernel, the following vulnerability has been resolved: media: gspca: use vb2_video_unregister_device() on disconnect gspca uses vb2_fop_release(), but gspca_disconnect() only unregisters the video device. If the queue owner closes the device after USB disconnect, vb2_fop_release() releases the queue and invokes gspca_stop_streaming() at that point. gspca_stream_off() calls subdriver stop callbacks and usb_set_interface() through gspca_dev->dev. By the time the late close runs, the USB core can have freed the usb_device, resulting in a use-after-free. This was observed as a KASAN use-after-free in sd_stopN(). Use vb2_video_unregister_device() so the queue is released and streaming is stopped synchronously during disconnect, while the usb_device is still valid. Since the helper takes the queue lock, which is usb_lock, call it after dropping that lock.
-
CVE-2026-99473
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Gracefully handle xarray errors when binding a memslot If inserting a memslot into a guest_memfd's bindings xarray fails, propagate the error back to the caller, i.e. fail memslot creation as well. Signalling success and continuing on with memslot creation results in use-after-free, as the guest_memfd instance will remain reachable via the memslot after the file is freed (kvm_gmem_release() won't nullify the file pointer due to lack of a valid binding). Opportunistically WARN and reject binding if KVM_MEMSLOT_GMEM_ONLY is already set, partly to guard against goofs elsewhere, but mostly so that KVM doesn't need to worry about clobbering flags when unwinding on failure. Regarding the unwind, the slot must be fully prepared before inserting it into the bindings, at which point the slot becomes reachable. I.e. waiting to update the slot in order to avoid the ugly unwind isn't an option. And as part of the unwind, explicitly nullify the relevant bindings, as xarray can store a subset of entries when populating a range.
-
CVE-2026-99474
In the Linux kernel, the following vulnerability has been resolved: HID: hiddev: keep state alive through disconnect unlock mutex_unlock() clears the mutex owner before taking its wait lock. A thread spinning in the final hiddev file release can acquire existancelock after hiddev_disconnect() clears the owner, then free hiddev before the disconnecting thread reaches the mutex wait lock. This causes a use-after-free in the mutex slow unlock path. Give the connection and each open file an explicit reference. Drop each reference only after its existancelock critical section has completed, so neither unlock path can free the mutex while the other is still using it.
-
CVE-2026-99460
In the Linux kernel, the following vulnerability has been resolved: mptcp: hold MP_JOIN msk ref when cloning reqsk TCP request migration clones pending request sockets with inet_reqsk_clone(). For MPTCP MP_JOIN requests this byte-copies subflow_req->msk, but the clone does not own a reference. The original and cloned requests can consequently drop the same msk reference, leaving one request with a dangling pointer. This manifests as a KASAN slab-use-after-free in subflow_req_destructor(): BUG: KASAN: slab-use-after-free in subflow_req_destructor (net/mptcp/subflow.c:45) Write of size 4 at addr ff1100010e008d40 by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5-00353-gc27e36054537 #10 PREEMPT(full) Call Trace: subflow_req_destructor (net/mptcp/subflow.c:45) subflow_v4_req_destructor (net/mptcp/subflow.c:694) __reqsk_free (net/ipv4/inet_connection_sock.c:906) reqsk_timer_handler (include/net/request_sock.h:137 net/ipv4/inet_connection_sock.c:1147) Allocated by task 10014: sk_prot_alloc (net/core/sock.c:2246) sk_clone (net/core/sock.c:2488) mptcp_sk_clone_init (include/net/sock.h:1848 net/mptcp/protocol.c:3564) subflow_syn_recv_sock (net/mptcp/subflow.c:883) tcp_check_req (net/ipv4/tcp_minisocks.c:934) Freed by task 0: slab_free_after_rcu_debug (include/linux/kasan.h:235 mm/slub.c:2677 mm/slub.c:6439) rcu_core (kernel/rcu/tree.c:2645 kernel/rcu/tree.c:2897) Last potentially related work creation: kmem_cache_free (mm/slub.c:2638 mm/slub.c:6377 mm/slub.c:6504) __sk_destruct (net/core/sock.c:2289 net/core/sock.c:2391) sk_destruct (net/core/sock.c:2419) __sk_free (net/core/sock.c:2430) sk_free (net/core/sock.c:2441) mptcp_close (include/net/sock.h:2020 net/mptcp/protocol.c:3399) inet_release (net/ipv4/af_inet.c:442) The buggy address belongs to the cache MPTCP of size 2968 The buggy address is 128 bytes inside a freed 2968-byte region A non-NULL subflow_req->msk means that the request owns one reference. The third ACK can concurrently transfer the original request reference to the child and release it, so taking an unconditional hold on the copied pointer is unsafe. MPTCP sockets use SLAB_TYPESAFE_BY_RCU and all current inet_reqsk_clone() callers run in an RCU read-side critical section. Document and lockdep-check that calling-context requirement. Read the pointer from the original request and acquire a reference only if it is still live. Use refcount_inc_not_zero_acquire() so the subsequent ownership validation cannot be reordered before the try-get, then re-read the original request to verify that it still owns the same msk. If either check fails, clear the clone pointer; otherwise its normal destructor balances the new reference. Mark the ownership-transfer store with WRITE_ONCE() to match the lockless reads. The following patch completes the clone fixup for MP_CAPABLE token ownership. Both patches carry the same Fixes tag and are required for stable backports.
-
CVE-2026-99461
In the Linux kernel, the following vulnerability has been resolved: mm: khugepaged: fix swap entry value to folio_pfn() Patch series "mm: khugepaged: fix tracepoint UAF", v5. The khugepaged tracepoints take a folio pointer and call folio_pfn(), but by then the folio may no longer be valid: freed after folio_put(), folio_unlock() or pte_unmap_unlock(), or not a folio at all but an xarray-encoded swap entry. On classic SPARSEMEM, dereferencing it oopses khugepaged as soon as the trace event is enabled; on other memory models it merely prints a bogus pfn. Pass the pfn to the tracepoints directly, captured while the folio is still pinned, closing the use-after-free windows in mm_khugepaged_scan_file(), mm_khugepaged_scan_pmd() and mm_khugepaged_collapse_file(). This patch (of 3): When the swap entries found exceed max_ptes_swap, the loop is left via break with folio still holding the xarray value that encodes the swap entry, not valid folio pointer. That value is passed to trace_mm_khugepaged_scan_file(), which feeds it to folio_pfn(). On FLATMEM and SPARSEMEM_VMEMMAP, the page_to_pfn() is plain pointer arithmetic, so the trace event merely prints bogus scan_pfn. On classic SPARSEMEM, the page_to_pfn() reads page->flags, dereferencing the tiny encoded integer and oopsing khugepaged whenever the trace event is enabled. So when folio is the swap entry value, simply set pfn to -1, just like exhausted scan naturally. And the folio_put() has maybe dropped the last reference of folio. The trace_mm_khugepaged_scan_file() is left with a dangling folio pointer. so using the folio_pfn() before dropping the reference, closing use-after-free window.
A list of CVEs whose flaw type is memory safety, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.