Memory safety CVEs.
Published CVEs classified as memory safety, ranked by exploit odds.
-
CVE-2024-21963
An out-of-bounds read vulnerability in the IOMMU could allow a malicious guest to corrupt hypervisor (HV) pages and potentially cause a host crash leading to loss of availability.
-
CVE-2026-99292
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl() In id_mode_to_cifs_acl(), while the chown branch reserves sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_acl) and the worst-case ACE space after commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or 5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace) on posix). However, the chmod branch also invokes build_sec_desc() -> copy_sec_desc(), which unconditionally writes the Owner SID at pnntsd + sidsoffset and the Group SID at pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total), and set_chmod_dacl() always writes a struct smb_acl header (8 bytes) even when the source descriptor has dacloffset == 0. When a security descriptor has compact or overlapping Owner/Group SIDs (or dacloffset == 0), calling chmod() under-allocates pnntsd and writes past the end of the slab buffer. Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_ntsd) on the posix path) in the chmod branch of id_mode_to_cifs_acl().
-
CVE-2026-99296
In the Linux kernel, the following vulnerability has been resolved: libceph: bound mon_command ack decode to front len handle_command_ack() bounds the decode with msg->front_alloc_len, the size of the reply buffer, instead of msg->front.iov_len, the number of bytes the monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to get_generic_reply(), which returns the preallocated ->reply of whichever generic request carries the same tid, so the buffer keeps its fixed size however short the reply is. An ack with hdr.front_len below sizeof(struct ceph_mon_request_header) + sizeof(u32), including 0, still passes ceph_decode_need(), and ceph_decode_32() returns four bytes that were never received: uninitialized slab memory, stale bytes of an earlier message, or bytes the peer planted by sending a reply that lands in the same buffer and is then rejected. The read stays within the allocation, so KASAN does not flag it. req->result reaches userspace through ceph_monc_do_statfs(), ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes it to ERR_PTR() unchecked, which faults: rbd: failed to get latest osdmap: -186318427 BUG: unable to handle page fault for address: fffffbfffe9ca034 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105) Call Trace: ... kernfs_fop_write_iter (fs/kernfs/file.c:345) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception Use msg->front.iov_len, matching handle_subscribe_ack(), handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply(). A well-formed ack has front.iov_len >= 22 and is unaffected; a short one takes the existing bad: path. This applies commit d3c32939fa0e ("libceph: bound get_version reply decode to front len") to the last decode-side use of front_alloc_len in this file.
-
CVE-2026-99289
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix app-instance non-durable supersede session UAF ksmbd_close_fd_app_instance_id() supersedes a prior open that has the same AppInstanceId. It reaches that open's session through opinfo->sess. This pointer is not refcounted. Session teardown detaches durable handles before it frees the session. It does not detach a non-durable open. That open still points at the session through opinfo->sess after the session is freed. Another session can supersede the open at the same time. The supersede then takes a write lock through the stale pointer, in the freed session's file table. BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0 Call Trace: _raw_write_lock+0x71/0xd0 ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd] smb2_open+0x3e10/0xd910 [ksmbd] Freed by task 212: ksmbd_session_destroy+0x38d/0x480 [ksmbd] Fix this by looking the session up by opinfo->session_id. The lookup returns a reference, as smb2_break_collect_channels() does. Recheck that opinfo->sess still points at it before using it. Do the lookup without m_lock held. destroy_previous_session() takes m_lock under the session table lock, and taking them in the other order here would deadlock.
-
CVE-2026-99308
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.
-
CVE-2026-126557
Out-of-bounds Write vulnerability in Broadcom AutoSys Workload Automation (AutoSys engine (AE) native clients modules) on Windows, Linux allows Overflow Buffers.This issue affects AutoSys Workload Automation: from 12.1.00.00-0305 through 24.2.00-0210.
-
CVE-2026-111436
Missing release of memory after effective lifetime vulnerability in openEuler iSulad on Linux. This vulnerability is associated with program file src/daemon/modules/spec/specs_mount.c. This issue affects iSulad: through 2.1.6. The memory leak vulnerability causes the iSulad daemon to be triggered frequently, exhausting the host machine's memory and ultimately leading to an OOM crash of the daemon, resulting in a denial of service (DoS).
-
CVE-2026-99291
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix SMB2 CREATE response buffer overflow smb2_allocate_rsp_buf() uses the MAX_CIFS_SMALL_BUFFER_SIZE (448-byte) buffer for a single SMB2_CREATE response. That buffer also holds a 4-byte length field, which only leaves 444 bytes for the SMB2 body. The AAPL response made this buffer too small. After 8f1b796ff113, a request with AAPL response contexts may need at least 456 bytes. In the 456-byte case, create_aapl_rsp_buf() is appended last, clears 128 bytes, and writes 12 bytes past the allocation. KASAN reports: BUG: KASAN: slab-out-of-bounds in create_aapl_rsp_buf+0x31/0x6e0 Write of size 128 at addr ffff88800370954c by task kworker/0:0/9 ... create_aapl_rsp_buf+0x31/0x6e0 smb2_open+0x58f9/0xef10 ... smb2_allocate_rsp_buf+0x19d/0x370 ... The buggy address is located 332 bytes inside of allocated 448-byte region [ffff888003709400, ffff8880037095c0) Reserve enough space for any fixed CREATE response KSMBD can build. Store the required allocation size in the per-dialect values table. This keeps the small buffer for other commands and avoids using the max transaction buffer for every CREATE.
-
CVE-2024-36344
Insufficient parameter sanitization in AMD Secure Processor (ASP) TEE DrvSys could allow an attacker with local access to the Trusted Execution Environment (TEE) interface or Trusted Application (TA) to cause an out-of-bounds write, potentially resulting in a loss of platform integrity or denial of service.
-
CVE-2026-99309
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check in build_sec_desc() When the large dacl_offset is provided, dacl_offset + sizeof(struct smb_acl) overflows on 32-bit builds and the check is passed, Which makes le16_to_cpu(ppdacl_ptr->size) read out-of-bounds. This only happens for dacl_offset in range [0xFFFFFFF8, 0xFFFFFFFF]. So the oob read is max 8 bytes preceding the allocated ppntsd. unsigned int dacl_offset = le32_to_cpu(ppntsd->dacloffset); int ppdacl_size, ntacl_size = ppntsd_size - dacl_offset; if (!dacl_offset || (dacl_offset + sizeof(struct smb_acl) > ppntsd_size)) goto out; Commit beff0bc9d69b ("ksmbd: fix overflow in dacloffset bounds check") fixes similar checks in other functions. But leaves this one out, because it is only valid for 32-bit builds. Reproduced on 32-bit ARM with KASAN, by a client sending SMB2 SET_INFO(SEC) with dacloffset=0xfffffff8, then QUERY_INFO(SEC) on the same file: BUG: KASAN: slab-out-of-bounds in build_sec_desc (fs/smb/server/smbacl.c:1105) Read of size 2 at addr c2a273fa by task kworker/1:1/35 CPU: 1 UID: 0 PID: 35 Comm: kworker/1:1 Not tainted 7.3.0-rc2+ #5 Workqueue: ksmbd-io handle_ksmbd_work Call trace: kasan_check_range from build_sec_desc (fs/smb/server/smbacl.c:1105) build_sec_desc from smb2_query_info (fs/smb/server/smb2pdu.c:7676) smb2_query_info from handle_ksmbd_work (fs/smb/server/server.c:160) handle_ksmbd_work from process_one_work (kernel/workqueue.c:3401) process_one_work from worker_thread (kernel/workqueue.c:3473) worker_thread from kthread (kernel/kthread.c:436) Add overflow check.
-
CVE-2026-99310
In the Linux kernel, the following vulnerability has been resolved: nfsd: hold cl_lock in client_has_openowners() client_has_openowners() walks clp->cl_openowners and reads so_stateids without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched creds can use-after-free the nfs4_openowner. BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140 fs/nfsd/nfs4state.c:3718 client_has_openowners() nfsd4_exchange_id nfsd4_proc_compound nfsd_dispatch svc_process Take clp->cl_lock while client_has_openowners() walks the openowner list.
-
CVE-2026-99305
In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and rebuilds it, but fbcon holds raw pointers into that list in fb_display[i].mode and nothing un-publishes them the way do_unregister_framebuffer() and store_modes() do with fbcon_delete_modelist(). The function does refuse to install a new mode while the framebuffer has users (dlfb->fb_count != 0), but only after the list is already destroyed. Reached from the 0666 "edid" sysfs attribute, an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with -EINVAL and still leaves every fb_display[i].mode dangling; the next console switch reads the freed fb_videomode in fb_videomode_to_var(). Test fb_count before touching the list. fbcon takes a reference through fbcon_open(), so that condition covers exactly the states in which fb_display[] points into the list, and the errno returned to userspace is unchanged. BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47 Workqueue: events console_callback Call Trace: fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) display_to_var (drivers/video/fbdev/core/fbcon.c:998) fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182) redraw_screen (drivers/tty/vt/vt.c:994) complete_change_console (drivers/tty/vt/vt_ioctl.c:1141) console_callback (drivers/tty/vt/vt.c:3358) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 28 bytes inside of freed 96-byte region [ffff8880107b4480, ffff8880107b44e0)
-
CVE-2026-99306
In the Linux kernel, the following vulnerability has been resolved: ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks it with newmap->possible_max_rank, which comes straight off the wire: ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then overwrites it with the size of the "in" set. Neither is bounded by CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks than the bitmap holds makes test_bit() read past the end of targets[]. The clear_bit() loop above indexes the same bitmap, though it is additionally bounded by mdsc->max_sessions. The map arrives on the monitor connection, which is unauthenticated in legacy msgr mode. CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the reserved inode ranges in super.h are laid out one rank apart over that span, so a map claiming more ranks is corrupt. Reject it where the rank space is established rather than letting the count reach check_new_map(). BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968) Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127 Workqueue: ceph-msgr ceph_con_workfn Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) check_new_map (fs/ceph/mds_client.c:5968) ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060) extra_mon_dispatch (fs/ceph/super.c:802) mon_dispatch (net/ceph/mon_client.c:1483) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> The buggy address belongs to stack of task kworker/1:2/127 and is located at offset 288 in frame: check_new_map (fs/ceph/mds_client.c:5846) This frame has 1 object: [32, 288) 'targets'
-
CVE-2026-99307
In the Linux kernel, the following vulnerability has been resolved: ceph: require the dentry lease record to cover struct ceph_mds_reply_lease parse_reply_info_lease() reads a 32-bit struct_len off the wire and only checks that many bytes are present, without requiring struct_len to cover sizeof(struct ceph_mds_reply_lease) (10 bytes). A malicious MDS can declare a shorter record and still get the pointer published: the following *p += sizeof(**lease) overshoot is undone by *p = lend, so nothing downstream rejects the reply. ceph_fill_trace() -> update_dentry_lease() then reads 10 bytes through that pointer on any lookup on a mounted CephFS, running past the end of the message front. Require the record to cover the structure, matching the sibling parse_reply_info_dir(). A conforming MDS always encodes the full 10 bytes. BUG: KASAN: slab-out-of-bounds in __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) Read of size 4 at addr ffff888026c63d65 by task kworker/0:3/2366 Workqueue: ceph-msgr ceph_con_workfn Call Trace: __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) ceph_fill_trace (fs/ceph/inode.c:1474 fs/ceph/inode.c:1823) mds_dispatch (fs/ceph/mds_client.c:4229 fs/ceph/mds_client.c:7225) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address is located 357 bytes inside of allocated 360-byte region [ffff888026c63c00, ffff888026c63d68)
-
CVE-2026-99302
In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: reject short connection requests nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The iWARP path allocates exactly the peer-provided length, so a six-byte MPA request reaches the parser and the hsqsize load reads two bytes past the allocation. Require the complete request structure before reading any of its fields. The decoded KASAN report is: BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41 Workqueue: iw_cm_wq cm_work_handler Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) cma_cm_event_handler (drivers/infiniband/core/cma.c:2181) iw_conn_req_handler (drivers/infiniband/core/cma.c:2640) cm_work_handler (drivers/infiniband/core/cm.c:2502 drivers/infiniband/core/cm.c:3858) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Allocated by task 12: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_node_track_caller_noprof (mm/slub.c:5414 mm/slub.c:5545) kmemdup_noprof (mm/util.c:138) cm_event_handler (drivers/infiniband/core/iwcm.c:194 drivers/infiniband/core/iwcm.c:1076) siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408) siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750) siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086) The buggy address is located 0 bytes to the right of allocated 6-byte region [ff1100010459d360, ff1100010459d366)
-
CVE-2026-99304
In the Linux kernel, the following vulnerability has been resolved: ceph: fix integer overflow in the snap trace bounds check ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps + num_prior_parent_snaps). Both counts come straight off the wire as __le32, so the addition is evaluated in unsigned int and wraps before sizeof(u64) promotes it to size_t: an MDS sending num_snaps = 1 and num_prior_parent_snaps = 0xffffffff makes the sum zero and the check degenerates to ceph_decode_need(&p, e, 0, bad), which always passes. dup_array() then reads num_snaps * 8 bytes past the end of the message front, which ceph_msg_new2() allocates at exactly front_len bytes. An unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or compromised MDS with no client-side action, as do the snaptraces carried in an MDS reply and in a cap import. Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX instead of wrapping, in the style fs/ceph/mdsmap.c already uses for num_export_targets. BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) ceph_update_snap_trace (fs/ceph/snap.c:836) ceph_handle_snap (fs/ceph/snap.c:1155) mds_dispatch (fs/ceph/mds_client.c:7234) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 0 bytes to the right of allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8)
-
CVE-2026-99301
In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.
-
CVE-2026-99295
In the Linux kernel, the following vulnerability has been resolved: smb: client: stop processing a read response after a receive error cifs_read_iter_from_socket() may call cifs_reconnect() before returning an error. The reconnect path aborts pending mids and invokes their callbacks. The callback can then release the cifs_io_subrequest containing rdata. cifs_readv_receive() nevertheless continues after a negative return and may dereference rdata in cifs_readv_discard(). KASAN reports the resulting UAF: BUG: KASAN: slab-use-after-free in cifs_readv_receive Read of size 4 by task cifsd cifs_readv_receive (fs/smb/client/transport.c:1284) cifs_demultiplex_thread (fs/smb/client/connect.c:1355) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Freed by task 148: netfs_put_subrequest (fs/netfs/objects.c:267) netfs_read_collection (fs/netfs/read_collect.c:460) netfs_wait_for_in_progress (fs/netfs/misc.c:462) Return the socket error immediately, as this path did before the iterator conversion. This also avoids adding a negative length to total_read.
-
CVE-2026-99297
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix double free in em28xx_alloc_urbs When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs() explicitly frees all items within usb_bufs->buf before calling em28xx_uninit_usb_xfer(), which also frees these items, causing them to be freed twice. BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) Free of addr ffff88802fd37c00 by task kworker/1:2/1182 Workqueue: events request_module_async Call Trace: kasan_report_invalid_free (mm/kasan/report.c:557) check_slab_allocation (mm/kasan/common.c:235) kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1)) usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) usb_free_urb (drivers/usb/core/urb.c:95) em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439) em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Freed by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer() handle the cleanup.
-
CVE-2026-99290
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free after a failed durable reconnect ksmbd_reopen_durable_fd() republishes a detached durable handle in the reconnecting session's file table and takes no reference for that entry. If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to remove the volatile id. Two reconnects of the same handle can both take a lookup reference before either attaches it. If the one that reopens first then fails and drops its references first, the other request makes the final put through ksmbd_put_durable_fd(). That frees the handle without removing the first session's table entry, so tearing that session down writes to freed memory. BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd] Call Trace: __close_file_table_ids+0x14d/0x740 [ksmbd] ksmbd_destroy_file_table+0x76/0x100 [ksmbd] ksmbd_session_destroy+0xf8/0x480 [ksmbd] ksmbd_dispose_sessions+0x13e/0x200 [ksmbd] ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd] Freed by task 1030: __ksmbd_close_fd+0x97d/0x1000 [ksmbd] smb2_open+0x14eb/0xd9f0 [ksmbd] Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file lifetime") handles a final put made by the reconnecting request, but not one made by another holder. Remove the volatile id under the file-table lock on this error path, before the references are dropped, as ksmbd_close_fd() does on the request_open path just above. Removal then no longer depends on which holder makes the final put. The stale comment in the reconnect cleanup is updated to match. A successful reconnect is unchanged.
-
CVE-2026-95822
The SOCKS5 client in subsys/net/lib/socks/socks.c built the CONNECT request in socks5_tcp_connect() by choosing the SOCKS5 address type from the address family of the proxy (proxy->sa_family) while reading the bytes out of the destination address supplied to connect(). A SOCKS5 request encodes the destination independently of the transport used to reach the proxy, so the two families are unrelated and nothing in the path forces them to agree: set_context_proxy() only requires the proxy family to match the socket, and zsock_connect_ctx() enters the SOCKS branch before any destination validation. With an IPv6 proxy and an AF_INET destination the code treated an 8-byte struct net_sockaddr_in as a struct net_sockaddr_in6 and copied the 16-byte sin6_addr from it, reading 12 bytes past the end of the object and transmitting them to the proxy. With CONFIG_USERSPACE enabled, z_vrfy_zsock_connect() copies only addrlen user bytes into a stack-resident struct net_sockaddr_storage and enforces no per-family minimum length, so the oversized read stays within the storage but returns stale, uninitialised kernel-stack bytes. An unprivileged user-mode thread can therefore open an AF_INET6 stream socket, point setsockopt(SO_SOCKS5) at a proxy it controls, and call connect() with a short AF_INET destination to have the kernel send it 12 bytes of supervisor stack residue per attempt. Without CONFIG_USERSPACE the read runs past the end of the caller's own struct net_sockaddr_in, disclosing adjacent memory to the proxy; the family mismatch can arise unintentionally when a destination is obtained from DNS while an IPv6 proxy is configured. Impact is limited to information disclosure of at most 12 bytes per connect() call, with no write primitive; the leak is delivered to whoever operates the SOCKS5 proxy. The mirrored pairing (IPv6 destination through an IPv4 proxy) is memory-safe but encoded the destination as SOCKS5_ATYP_IPV4 from the first four bytes of the IPv6 address, causing the proxy to connect to an unrelated host. Exploitation requires the non-default CONFIG_SOCKS option, a socket with SO_SOCKS5 configured, and both IPv4 and IPv6 support in the image. The fix moves the encoding into a helper that selects the address type from dest->sa_family and validates dest_len against the matching struct net_sockaddr_in/struct net_sockaddr_in6 before copying, rejecting under-length or unsupported destinations with an error.
-
CVE-2026-93670
The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.
-
CVE-2026-16662
boot_save_boot_status() in boot/bootutil/src/boot_record.c reads the image's EXPECTED_HASH_TLV into a stack buffer image_hash[IMAGE_HASH_SIZE] that is never zero-initialised. The TLV handler validates only the upper bound (len > sizeof(image_hash)) and then reads exactly len bytes, so a TLV shorter than IMAGE_HASH_SIZE leaves the tail of image_hash holding stale stack content. The subsequent copy into the boot record, memcpy(buf + offset, image_hash, sizeof(image_hash)), uses the fixed buffer size rather than len, so up to IMAGE_HASH_SIZE - 1 bytes of uninitialised bootloader stack are written into the measured-boot record. The defect is reachable only under MCUBOOT_MEASURED_BOOT, and only when nothing has checked the length of the hash TLV before boot_save_boot_status() reads it. bootutil_img_validate() rejects a hash TLV whose length is not exactly sizeof(hash) (boot/bootutil/src/image_validate.c:345), and primary-slot validation is on by default (Zephyr's CONFIG_BOOT_VALIDATE_SLOT0 defaults to y), so in a default build the malformed image never reaches this code. Two kinds of build let a short TLV through: Builds that use pure signatures (MCUBOOT_SIGN_PURE, Zephyr CONFIG_BOOT_SIGNATURE_TYPE_PURE). The signature covers the image itself, so the hash-TLV check in bootutil_img_validate() is compiled out, and a pure-signed image normally carries no hash TLV. A hash TLV is still allowed in the unprotected TLV area, which the signature does not cover, so a short one can be added to a correctly signed image without invalidating it. This applies with every upgrade strategy, including direct-XIP and RAM-load, and the modified image can be delivered through any path that accepts a signed image. Builds with primary-slot validation turned off: the swap and overwrite loader built without MCUBOOT_VALIDATE_PRIMARY_SLOT, which checks only the image magic before calling boot_add_shared_data(), and the Zephyr single-slot loader (boot/zephyr/single_loader.c) built without it, including the MCUBOOT_VALIDATE_PRIMARY_SLOT_ONCE variant, which skips validation once the trailer records an earlier successful one. Placing the crafted image requires physical or flash-write access to the device; in a single-slot build with serial recovery enabled, the serial-recovery upload writes the primary slot directly and can place it as well. Outside pure-signature builds, the direct-XIP and RAM-load strategies in boot/bootutil/src/loader.c validate the selected slot unconditionally and are not affected. It is also reachable through a time-of-check/time-of-use change to tamperable external flash between validation and the boot-record read. In these configurations the boot record's measurement is already not trustworthy: the hash copied into the record is the image's own EXPECTED_HASH_TLV, which nothing has verified and which the attacker chooses. The defect therefore does not weaken attestation integrity any further. What it adds is a path for bootloader memory to leave the device: up to 63 bytes (IMAGE_HASH_SIZE - 1) of uninitialised bootloader stack are embedded in the measurement field that a downstream attestation service sends to a remote verifier. In the configurations analysed the residue is bootloader internal state (TLV offsets and lengths, flash addresses, loop state), not key material, but what occupies that stack region depends on configuration and on which code ran before boot_save_boot_status(). It is reported as a low-severity, defense-in-depth disclosure with no integrity or availability impact. This is distinct from the already-fixed record_len integer underflow in the same routine (GHSA-8hrv-4cp5-4rg3). The fix rejects any EXPECTED_HASH_TLV whose length is not exactly IMAGE_HASH_SIZE.
-
CVE-2026-115501
IBM i 7.3 7.4, 7.5, and 7.6 is vulnerable to a stack buffer overflow, caused by improper bounds checking in the QFileSvr.400 file system. By sending a command in the QFileSvr.400 file system, a local authenticated attacker could cause undefined behavior.
-
CVE-2026-63246
A kernel pool buffer overflow vulnerability in the ct0531fl.sys file of the Creative WDM Audio Driver (64-bit), Sound Blaster Audigy 4 and Sound Blaster Audigy 5/Rx could allow a local attacker with low privilege access to cause a denial of service.
-
CVE-2026-0436
Insufficient parameter sanitization in the AMD Secure Processor (ASP) trusted execution environment (TEE) SPDM driver could allow an attacker to supply malicious input, potentially resulting in loss of platform integrity, memory leakage, or denial of service.
-
CVE-2026-49747
Software installed and run as a non-privileged user may conduct GPU system calls to trigger an integer overflow and allow OOB writes to GPU buffers. The integer overflow caused when mapping a GPU buffer >4GB causes corruption of array length, and can lead to kernel panics or out of bounds access.
-
CVE-2026-124019
VB-Audio VB-CABLE before 3.5.2.0 contains out-of-bounds read and write vulnerabilities in the vbaudio_cable64_win10.sys kernel streaming driver's KSPROPSETID_Audio MUTE, VOLUMELEVEL, and PEAKMETER2 property handlers that allow a local standard user to supply an all-channels sentinel value improperly used as a loop terminator or array index instead of being bounds-checked. Attackers can exploit the accessible low-integrity KS filter device object to write attacker-controlled values sequentially into kernel memory, corrupting kernel globals and object pointers, or read past an array boundary to leak kernel memory, resulting in local privilege escalation or denial of service via a kernel bug check.
-
CVE-2026-126831
A flaw was found in cpio. A local user can cause a Denial of Service (DoS) by triggering a stack-based buffer overflow when creating archives in tar or ustar formats. When archiving files owned by users or groups with names exceeding 32 characters, cpio copies these names into fixed-size memory without verifying their length. This unbounded copy corrupts stack memory and causes the application to crash.
-
CVE-2026-126792
A memory-safety flaw in the key-management request-building component of the library can lead to an out-of-bounds write on the heap. A fixed-size output buffer is used under an assumption about cryptographic key size that is never validated, so when the library is embedded by a caller that supplies its own cryptographic callback implementation, data larger than the buffer can be written past its end. Exploitation requires the ability to control the embedding application's in-process key-management provider configuration, a high-privilege position. The demonstrated impact is memory corruption resulting in abnormal termination of the client process.
-
CVE-2026-93669
The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80). If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself. The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows. The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm.
-
CVE-2026-116441
Dell PowerStore SDNAS contains an out-of-bounds write vulnerability in the storage-processor interconnect driver that could allow a malicious peer to execute code with system privileges.
-
CVE-2026-99313
In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: fix race condition when accessing stale stack pointer The driver uses hidpp->send_receive_buf to point to a stack-allocated buffer in the synchronous command path (__do_hidpp_send_message_sync). However, this pointer is not cleared when the function returns. If an event is processed (e.g. by a different thread) while the send_mutex is held by a new command, but before that command has updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will observe that the mutex is locked and dereference the stale pointer. This results in an out-of-bounds access on a different thread's kernel stack (or a NULL pointer dereference on the very first command). Fix this by: 1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex in the synchronous command path. 2. Moving the assignment of the local 'question' and 'answer' pointers inside the mutex_is_locked() block in the handler, and adding a NULL check before dereferencing.
-
CVE-2026-99314
In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap() usb_stream_hwdep_mmap() reads us122l->sk.s and dereferences it without checking for NULL. The stream object is released by usb_stream_free(), which is reached through us122l_stop() both when the device is disconnected and when us122l_start() fails, and it leaves us122l->sk.s set to NULL. The hwdep file stays usable after that, so a later mmap() KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:usb_stream_hwdep_mmap+0x107/0x890 sound/usb/usx2y/us122l.c:182 crashes while reading s->read_size, which sits at offset 0x10. That NULL is an expected state for this field: usb_stream_hwdep_vm_fault(), usb_stream_hwdep_poll(), usb_stream_hwdep_ioctl(), usb_stream_stop() and usb_stream_free() all test it before use. Only the mmap callback misses the check, so let it return -ENODEV, matching what the other hwdep mapping in usx2yhwdeppcm.c does when its shared buffer has not been allocated.
-
CVE-2026-99318
In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close bcd2000_disconnect() calls snd_card_disconnect(), which only prevents new opens, and then frees the MIDI URBs. A rawmidi file that was already open can still be closed afterwards, and its close callback, bcd2000_midi_output_close(), calls usb_kill_urb() on midi_out_urb. The URB pointers are cleared on disconnect and their accesses are serialized with midi_lock, but bcd2000_midi_output_close() reads midi_out_urb without that lock. The check can therefore pass just before the pointer is cleared, and usb_kill_urb() then runs on the URB that has already been freed: BUG: KASAN: slab-use-after-free in usb_kill_urb+0x74/0x80 Read of size 8 at addr ffff8880078e7d40 usb_kill_urb bcd2000_midi_output_close close_substream rawmidi_release_priv snd_rawmidi_release Allocated by: usb_alloc_urb <- bcd2000_init_midi <- bcd2000_probe Freed by: usb_free_urb <- bcd2000_midi_free <- bcd2000_disconnect Take the lock in bcd2000_midi_output_close() and reference the URB with usb_get_urb() before releasing it. The URB then stays valid until usb_put_urb() after usb_kill_urb() has returned, even if a disconnect frees it in the meantime. usb_kill_urb() itself cannot run under midi_lock, as the completion handler takes the same lock.
A list of CVEs whose flaw type is memory safety, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.