Memory safety CVEs.
Published CVEs classified as memory safety, ranked by exploit odds.
-
CVE-2026-99399
In the Linux kernel, the following vulnerability has been resolved: xfs: reject remote xattr entries with an out-of-range value length xfs_attr3_leaf_verify_entry() validates a remote attribute entry's name but never bounds its on-disk value length (xfs_attr_leaf_name_remote. valuelen, a __be32). A crafted leaf with valuelen = 0x80000000 passes the verifier and the CRC. That length is later assigned into the signed int args->rmtvaluelen (xfs_attr3_leaf_getvalue), becoming negative, which slips past the signed -ERANGE check in xfs_attr_copy_value(); a getxattr() with a small buffer then memcpy()s a full remote block into the small kvalue buffer (xfs_attr_rmtval_copyout) -- a heap out-of-bounds write with attacker-controlled content, from an unprivileged getxattr(2) on a mounted crafted image. Reject remote entries whose value length exceeds XFS_XATTR_SIZE_MAX in the leaf verifier, so the malicious block is rejected at read time.
-
CVE-2026-99396
In the Linux kernel, the following vulnerability has been resolved: xfs: bound da-node entry count against the correct geometry xfs_da3_node_verify() bounds the node entry count against the larger of the directory and attribute geometries because, as a buffer verifier, it cannot tell whether the block belongs to the directory or the attribute tree. When the directory block size exceeds the fs block size (e.g. mkfs.xfs -n size=64k -b size=4k), an attribute node buffer is a single fs block that holds only m_attr_geo->node_ents entries, yet a crafted attr node may claim a count up to m_dir_geo->node_ents and still pass the verifier. xfs_da3_node_lookup_int() then indexes btree[] up to that count during its binary search -- an out-of-bounds read via getxattr/listxattr on a mounted crafted image. The buffer verifier is the wrong place to tighten this: it has no fork context, and the transaction-less read path used by getxattr does not run xfs_da3_node_set_type() either. xfs_da3_node_lookup_int(), on the other hand, always runs on that path and holds args->geo, the geometry of the fork actually being searched. Bound the entry count against args->geo->node_ents there, before walking the entries.
-
CVE-2026-99395
In the Linux kernel, the following vulnerability has been resolved: xfs: bound inode fork length against the fork size during log recovery xlog_recover_inode_commit_pass2() copies an inode log item's data/attr fork region into the inode buffer using the on-log region length without bounding it against the fork capacity, e.g.: len = item->ri_buf[2].iov_len; memcpy(XFS_DFORK_DPTR(dip), src, len); The only guard is an ASSERT, which is a no-op on production kernels (CONFIG_XFS_DEBUG off), and xfs_dinode_verify() runs only after the copy. A crafted image with a dirty log can therefore drive a heap out-of-bounds write at mount time. The XFS_ILOG_DBROOT sibling already passes XFS_DFORK_DSIZE as a bound; the DDATA/DEXT and ADATA/AEXT memcpy paths did not. Bound each logged fork region against the destination fork size before copying it, and reject the log item with -EFSCORRUPTED when it does not fit. Because the recovered inode is only verified after the fork data has been copied in, the checks are done up front, before any memcpy into the on-disk inode.
-
CVE-2026-99393
In the Linux kernel, the following vulnerability has been resolved: xfs: don't overrun incore inode when cleaning attr forks LOLLM noticed that xrep_dinode_check_afork doesn't check for a di_forkoff value that is so large that the attr fork would begin after the end of the inode space. This causes afork_{ptr,size} to be nonsense. What we really ought to do here is zap the attr fork.
-
CVE-2026-99389
In the Linux kernel, the following vulnerability has been resolved: smb: server: size directory name conversion buffer correctly A 2048-byte ASCII directory name needs 4098 bytes when converted to UTF-16, including the terminator. ksmbd_convert_dir_info_name() caps its allocation at PATH_MAX and writes past the end of that buffer. Allocate space for one UTF-16 code unit per input byte plus the terminator. Use kmalloc_array() to check the size calculation.
-
CVE-2026-99388
In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: fix buffer length underflow in RDMA transfers When a remote buffer descriptor is larger than the remaining local buffer, smbdirect_connection_rdma_xmit() clamps its length and sets buf_len to zero. The common accounting code then subtracts the clamped length from buf_len, causing it to underflow. If another descriptor follows, the loop processes it with a wrapped remaining length and includes memory beyond the local buffer in the RDMA transfer. A client can trigger an out-of-bounds kernel write with an SMB WRITE request, or an out-of-bounds kernel read with an SMB READ request, by supplying multiple RDMA buffer descriptors with an oversized descriptor before the last one. Remove the premature assignment to buf_len. Subtracting the clamped length already consumes the remaining buffer, so the next iteration stops and only descriptors within the local buffer are used to build work requests.
-
CVE-2026-99386
In the Linux kernel, the following vulnerability has been resolved: smb: client: don't resurrect an exiting tcon from cached dir workers cfids_laundromat_worker() bumps tcon->tc_count for every expired open cfid and queues cached_dir_offload_close() without checking whether the tcon is already being torn down. Racing with the final cifs_put_tcon(), the tcon comes back from zero and gets torn down twice: T1 T2 cifs_put_tcon() --tc_count == 0, TID_EXITING tconInfoFree() free_cached_dirs() cancel_delayed_work_sync() cfids_laundromat_worker() ++tc_count == 1 queue_work(serverclose_wq) kfree(tcon->origin_fullpath) kfree(tcon) cached_dir_offload_close() close_cached_dir() [UAF] cifs_put_tcon() tconInfoFree() [double free] cached_dir_lease_break() also bumps tc_count without tc_lock, racing with the laundromat's locked update. Take the tcon reference through a helper that refuses once the tcon is TID_EXITING or its refcount has dropped to zero. Queued put_work and close_work then always hold a tcon reference, so tconInfoFree() can't run before they finish and free_cached_dirs() doesn't need to flush any workqueue. If the laundromat can't get a reference, put the cfid back on the dying list for free_cached_dirs() to free; its handle goes away with the tree connection. The lease break path finds the tcon on ses->tcon_list under cifs_tcp_ses_lock, so it can't see TID_EXITING, but it now takes tc_lock.
-
CVE-2026-99387
In the Linux kernel, the following vulnerability has been resolved: smb: client: bound POSIX lock data area by response length CIFSSMBPosixLock() receives a TRANS2 response whose server-provided DataOffset and DataCount are not required by validate_t2() to describe an interval inside the response. A server can therefore make the client read a cifs_posix_lock beyond the response buffer and return those kernel bytes through F_GETLK. Use smbCalcSize() to obtain the full response length after any multipart TRANS2 reassembly, then reject data areas that extend past it before dereferencing them.
-
CVE-2026-99385
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix buffer overflow in SMB2_tcon() In SMB2_tcon(), unc_path is allocated with a fixed buffer size of MAX_SHARENAME_LENGTH * 2 bytes (672 bytes). However, the user-controlled UNC path (tree) length is passed to cifs_strtoUTF16(), which assumes the destination buffer is large enough and writes strlen(tree) + 1 UTF-16 code units. Commit 62a1a439e0fd ("cifs: clean up handling of unc= option") removed the length check on UNC mount options, allowing mount paths to exceed MAX_SHARENAME_LENGTH while retaining the fixed-size buffer allocation in SMB2_tcon(). Consequently, an oversized UNC string causes cifs_strtoUTF16() to write past the end of the heap object, resulting in a slab-out-of-bounds write. Furthermore, if a tree exceeds MAX_TREE_SIZE characters, strscpy() truncates it in cifs_tcon::tree_name, causing subsequent reconnects or failovers to fail. Fix this by first verifying that the length of tree does not exceed MAX_TREE_SIZE, returning -EINVAL if it does. Then, dynamically allocate unc_path based on the length of tree so that it safely accommodates all UTF-16 code units for paths within MAX_TREE_SIZE. [pc: remove unused MAX_SHARENAME_LENGTH]
-
CVE-2026-99384
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read of the resume name sent in TRANS2_FIND_NEXT2 cifs_fill_dirent() reads the fixed part of a directory entry and the name length it holds, or for SMB_FIND_FILE_UNIX scans the name for its terminating NUL, without knowing where the response ends. cifs_save_resume_key() calls it for the entry at the LastNameOffset the server chose, after every FindNext and after the FindFirst of a search rewind, and records the name it returns as the resume name of the search without bounding it; the next CIFSFindNext() copies up to PATH_MAX - 1 bytes from that name into its request and sends them to the server. cifs_filldir() bounds the name against the end of the response since commit f8cf09a53a0d ("smb: client: bound dirent name against end of SMB response in cifs_filldir"), but only after cifs_fill_dirent() has read the entry, and nxt_dir_entry() checks the entries it walks only against sizeof(FILE_DIRECTORY_INFO), for every level but SMB_FIND_FILE_INFO_STANDARD, and never sees the first entry of a response. Bounding where last_entry starts, as the preceding patch does, does not bound the read. A last entry that starts within the final bytes of the response still has its fixed part read past the end of the received data, and the name length it declares, a __le32 for every level but SMB_FIND_FILE_INFO_STANDARD and SMB_FIND_FILE_UNIX, is recorded without being checked against anything. CIFSFindNext() rejects only a length of PATH_MAX or more, then copies the name, up to 4095 bytes, into its request and sends it, and as the report below shows that copy can run past the end of the cifs_request allocation that holds the response. For SMB_FIND_FILE_UNIX the name is in addition scanned for its terminating NUL over up to PATH_MAX + 1 UTF-16 units, or PATH_MAX bytes, before any check. The FindNext that carries the name is only sent by the SMB1 dialect, which is not negotiated by default; reaching it requires an explicit vers=1.0 mount. With KASAN enabled, a response whose last entry declares a name longer than the bytes that follow it gives: ================================================================== BUG: KASAN: slab-out-of-bounds in CIFSFindNext+0x8ca/0x14c0 Read of size 4080 at addr ffff88807c823f98 by task ls/83 CPU: 0 UID: 0 PID: 83 Comm: ls Not tainted 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Call Trace: <TASK> kasan_report+0xdf/0x1a0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 CIFSFindNext+0x8ca/0x14c0 cifs_readdir+0xf51/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 1 at 13.497119s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address belongs to the object at ffff88807c820000 which belongs to the cache cifs_request of size 16588 The buggy address is located 16280 bytes inside of allocated 16588-byte region [ffff88807c820000, ffff88807c8240cc) ================================================================== The read is the memcpy() that copies the recorded name into the next request, so those bytes go to the server. Pass the end of the response to cifs_fill_dirent() and have it reject an entry whose fixed part does not fit or whose name extends past the end, before either is used, so that both callers are covered; cifs_save_resume_key() computes the end the same way cifs_readdir() does. The name bound compares the bytes left between the name and the end with the name length rather than adding the length to the name pointer, since the length is a 32-bit value taken from the entry and the sum could wrap on 32-bit systems. cifs_fill_dirent() is also used on the SMB2 readdir path; there smb2_parse_query_directory() has already checked every entry against the end of the response, so a vali ---truncated---
-
CVE-2026-99382
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject FIND data areas that run past the received response CIFSFindFirst() and CIFSFindNext() take the directory entries of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response from DataOffset for DataCount bytes. validate_t2() bounds DataOffset at 1024 and ParameterCount + DataCount by the byte count, and nothing compares DataOffset + DataCount with the number of bytes SendReceive() copied into the buffer. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response whose data area extends past its end has srch_entries_start point at bytes of the request that was just sent, or at whatever the allocation held before, and those bytes are parsed as directory entries. cifs_readdir() and find_cifs_entry() walk the entries with nxt_dir_entry(), which checks every entry but the first of a response against the end of the SMB; cifs_query_path_info() and cifs_backup_query_path_info() read the first entry with no check at all. Those reads stay inside the allocation, but what they return is not part of the response. The last entry, which LastNameOffset locates relative to the data area, is bounded against the received response by an earlier patch of this series, as is every entry that cifs_fill_dirent() parses; the walk itself and the two query functions are not. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose data area extends past the received length, with the -EINVAL that validate_t2() returns for the other malformed transaction responses. cifs_query_path_info() and cifs_backup_query_path_info() still read a whole entry from a data area that may be smaller than one; that is not changed here. A conforming server is not affected. The data block of a transaction response is part of the SMB, so DataOffset + DataCount cannot exceed the smbCalcSize() bytes that SendReceive() copies; coalesce_t2() appends each secondary response to the data area and adds its length to both DataCount and the byte count, which keeps that relation.
-
CVE-2026-99381
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short or out-of-range FIND response parameters CIFSFindFirst() and CIFSFindNext() read the SearchHandle, SearchCount, EndofSearch and LastNameOffset of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response at ParameterOffset. validate_t2() bounds the offset at 1024 and ParameterCount below 512, and nothing compares them with the number of bytes SendReceive() copied into the buffer or with the size of the response parameters. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response with a ParameterOffset past its end has the search handle, the entry count, the end-of-search flag and the last-entry offset read out of the request that was just sent, or out of whatever the allocation held before, and a ParameterCount smaller than the parameters has them read past the end of the parameter block. The reads stay inside the allocation, but what they return is not part of the response, and CIFSFindFirst() then hands back a search handle the server never sent. That handle is sent back to the server in the next FIND_NEXT2 or FIND_CLOSE2, so two bytes of the buffer leak at an offset the server picks. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose parameter area is smaller than the response parameters or extends past the received length, returning smb_EIO2() with a new smb_eio_traces value for each of the two responses, like the other response checks this file gained since v6.19. Backports to trees before v6.19 need smb_EIO2() replaced with -EINVAL and the trace.h hunk dropped. A conforming server is not affected. The parameter block of a transaction response is part of the SMB, so ParameterOffset + ParameterCount cannot exceed the smbCalcSize() bytes that SendReceive() copies, and the response parameters are 10 bytes for FIND_FIRST2 and 8 bytes for FIND_NEXT2, which is what T2_FFIRST_RSP_PARMS and T2_FNEXT_RSP_PARMS hold. This patch depends on "smb: client: reject FIND data areas that run past the received response", whose declarations it extends.
-
CVE-2026-99379
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate SMB1 EA list bounds before parsing CIFSSMBQAllEAs() checks the server-provided EA list length by adding it to the response pointer. On 32-bit systems, a positive length can wrap the pointer and pass the comparison. The parser then walks outside the received response while reading the next FEA header. A response with a list length of 0x40000000 reproduces this as a native i386 page fault and kernel panic from listxattr() against an SMB1 server. Check that the EA list starts within the SMB byte area before reading its header. Keep its length unsigned and compare it with the bytes left in the response without pointer addition. SMB1 is not negotiated by default and requires an explicit vers=1.0 mount.
-
CVE-2026-99377
In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: bound the CB_NOTIFY_DEVICEID array count before allocating decode_devicenotify_args() hands the server's notification count straight to kmalloc_objs() as the array length, without checking it against the message that carried it. Bound it the way nfs4xdr.c bounds an attribute length, against xdr_stream_remaining().
-
CVE-2026-99367
In the Linux kernel, the following vulnerability has been resolved: NFSD: Don't complete a cld upcall the daemon has not read cld_pipe_downcall() matches a reply to its upcall on the xid alone. A write that arrives before the daemon has read that upcall completes __cld_pipe_upcall() while its struct rpc_pipe_msg is still queued on the pipe. The waiter returns, its stack frame goes away, and the pipe keeps a list_head that points into it. The next rpc_queue_upcall() walks that pointer: BUG: KASAN: vmalloc-out-of-bounds in __list_add_valid_or_report Read of size 8 at addr ffffc90007027950 by task syz.0.96/13066 __list_add_valid_or_report+0x6a/0x130 rpc_queue_upcall cld_pipe_upcall nfsd4_cld_grace_start nfsd4_cld_tracking_init The pipe is mode 0600 in rpc_pipefs, so the trigger is a broken or hostile nfsdcld rather than an unprivileged task. Record whether the daemon has consumed the whole message and complete only when it has. cld_pipe_destroy_msg() runs on every path by which the pipe releases a message, so it can maintain that flag under cn_lock. nfsdcld sends its -EINPROGRESS downcalls only after reading the upcall, so the new check does not break the GraceStart record stream.
-
CVE-2026-99364
In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix out-of-bounds read in the rpc_status dump nfsd_nl_rpc_status_get_dumpit() loads args->opcnt and args->ops separately, then walks ops[] before rechecking rq_status_counter. A COMPOUND that completes between the two loads runs nfsd4_release_compoundargs(), which zeroes opcnt and points ops back at the eight-entry inline array. A dump that already sampled an opcnt of 200 clamps it to the sixteen slots in rq_opnum, then indexes iops[0..15]. iops is the last member of struct nfsd4_compoundargs and rq_argp is allocated at exactly that size, so the walk runs off the end of the allocation. The trailing recheck discards the sampled data, but the read has already happened. NFSD_CMD_RPC_STATUS_GET carries no GENL_ADMIN_PERM, so an unprivileged local user can repeat the dump against a busy server until it lands in the window. Sample opcnt and ops into locals, then finish the counter recheck before dereferencing ops. An unchanged counter means both came from the same COMPOUND, where opcnt cannot exceed what ops holds.
-
CVE-2026-99362
In the Linux kernel, the following vulnerability has been resolved: nfsd: preflight SEQUENCE replies before accepting a slot nfsd4_sequence() narrows the reply buffer to the session's cached reply limit before it accepts the slot seqid. A client may negotiate ca_maxresponsesize_cached down to NFSD_MIN_HDR_SEQ_SZ, and nfsd4_alloc_slot() then gives every slot a zero-length sl_data[]. A COMPOUND tag can fill that narrowed buffer until it holds the SEQUENCE opcode but not the status word that follows. nfsd4_encode_operation() returns without running nfsd4_encode_sequence(), so cstate.data_offset stays zero. It leaves op->status at nfs_ok as well, so the COMPOUND is treated as having succeeded. nfsd4_store_cache_entry() declines to cache a lone SEQUENCE that returned an error. That test reads the status the operation reported, so it passes here. The copy starts at offset zero and takes the whole reply, RPC and COMPOUND headers included, into the zero-length sl_data[]. The COMPOUND tag is copied along with it, so the client picks most of the bytes written past the end of the slot: BUG: KASAN: slab-out-of-bounds in read_bytes_from_xdr_buf+0x1bc/0x390 Write of size 80 at addr ffff888003a549cd by task kunit_try_catch/24 __asan_memcpy+0x38/0x60 read_bytes_from_xdr_buf+0x1bc/0x390 nfsd4_sequence_done+0x5b0/0x810 nfs4svc_encode_compoundres+0x1bf/0x240 Check that the fixed-size SEQUENCE result, plus room for a following operation's error status, fits the negotiated limit before narrowing the buffer and consuming the slot seqid. The slot and its reply cache are left unchanged, as RFC 8881 Section 2.10.6.1.2 requires of an error returned from SEQUENCE.
-
CVE-2026-99355
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix oversized GSS proxy token copy gss_read_proxy_verf() allocates one page per token chunk, but it copies the entire linear head of an RPC request into in_token->pages[0]. A UDP datagram can leave more than PAGE_SIZE bytes in the linear head, so a large RPCSEC_GSS INIT token overwrites following pages. Copy the linear head in page-sized chunks before switching to the request page array. The linear head itself can span multiple pages.
-
CVE-2026-99347
In the Linux kernel, the following vulnerability has been resolved: ALSA: x86: hdmi: fix chmap array missing terminator entry had_build_channel_allocation_map() allocates a single struct snd_pcm_chmap_elem via kzalloc() and stores it as intelhaddata->chmap->chmap. struct snd_pcm_chmap.chmap is expected to be a zero-terminated array (see snd_pcm_std_chmaps[]), but had_register_chmap_ctls() never overrides the TLV callback installed by snd_pcm_add_chmap_ctls(), so the generic pcm_chmap_ctl_tlv() from ALSA core is left in place. pcm_chmap_ctl_tlv() is reachable by any local user via SNDRV_CTL_IOCTL_TLV_READ on the "Playback Channel Map" control and walks the array with "for (map = info->chmap; map->channels; map++)". Since the driver's single element is never terminated, this walks past the allocation. The same pointer is also freed on hot-unplug and rebuilt on hot-plug under intelhaddata->mutex, while the TLV callback runs under card->controls_rwsem without that mutex, so the walk can also race a concurrent free of the array. Fix this by allocating a second, zeroed element so the array is properly terminated, and by dropping the inherited TLV callback entirely at registration time, since the driver never implements one of its own.
-
CVE-2026-99340
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Take SRCU in kvm_zap_gfn_range() kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to reschedule. Callers that do not already hold kvm->srcu (or slots_lock) can race with memslot deletion: synchronize_srcu_expedited() does not wait, kvm_free_memslot() frees the old slot and its rmap, and the zap resumes on freed memory. The VFIO noncoherent-DMA path hits this by zapping the entire GPA space without SRCU. KASAN reported: BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0 Read of size 8 at addr ffffc900005c1008 Call Trace: slot_rmap_walk_next+0x82/0x1c0 __kvm_rmap_zap_gfn_range+0x17a/0x280 kvm_zap_gfn_range+0x2a6/0x6a0 kvm_vfio_set_attr+0x576/0x770 kvm_device_ioctl+0x1ff/0x3b0 Take SRCU inside kvm_zap_gfn_range() so every caller is covered. Nesting with an existing kvm->srcu critical section is fine; the helper uses a local index. Drop the now-redundant SRCU pair from __kvm_set_or_clear_apicv_inhibit().
-
CVE-2026-99332
In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix out-of-bounds left shift by 32 in s32ton() Syzbot reported an out-of-bounds shift (32-bit integer shifted left by 32) in the s32ton() routine in the HID core. This routine converts a signed 32-bit integer to a signed n-bit integer, and it caps the value of n at 32. But when n == 32 there's no need to do anything; it can simply return the input value. This will avoid calculating (1 << n) when n is 32, which was the cause of the invalid shift.
-
CVE-2026-99330
In the Linux kernel, the following vulnerability has been resolved: HID: mcp2200: validate READ_ALL response length The HID core invokes raw_event callbacks before validating the report length. mcp2200_raw_event() casts a READ_ALL response to struct mcp_read_all_resp and reads fields through offset ten without checking that the response contains the structure. A one-byte READ_ALL response reproduced the issue under KASAN: BUG: KASAN: slab-out-of-bounds in mcp2200_raw_event+0x24b/0x3a0 Read of size 1 by task hidtrigger/89 Call Trace: mcp2200_raw_event+0x24b/0x3a0 kasan_report+0x139/0x170 Reject an incomplete READ_ALL response with a protocol error before reading its fields. The common completion path then wakes the command waiter with the error instead of leaving it to time out. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus.
-
CVE-2026-99327
In the Linux kernel, the following vulnerability has been resolved: HID: roccat: kovaplus: reject short button reports The raw event callback runs before HID core validates and zero-pads the report. It passes the buffer to helpers which inspect data[0] and read a complete struct kovaplus_mouse_report_button for button reports. A truncated report can therefore cause an out-of-bounds read. Require enough data for the button report before calling either helper. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw-event length validation to hid-asus.
-
CVE-2026-99324
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read when padding the final compound response Compound response handling pads the last response of a compound to an 8-byte boundary by growing the final iov and the RFC1002 length. smb2_allocate_rsp_buf() allocates exactly response_sz. A command can fill the response buffer to within 7 bytes of its end, for example a QUERY_INFO whose output is bounded only by the space left. The padding can then run past the allocation, and ksmbd_tcp_writev() reads those bytes when it sends the response. BUG: KASAN: slab-out-of-bounds in _copy_from_iter+0x744/0x10e0 Call Trace: _copy_from_iter+0x744/0x10e0 tcp_sendmsg_locked+0x2290/0x3f80 ksmbd_tcp_writev+0x10c7/0x1ab0 [ksmbd] Allocate room for the padding when the request is a compound, as smb2_read() and smb2_read_pipe() do for their payloads. response_sz is unchanged, so commands still fill only up to it, and kvzalloc() zeroes the padding.
-
CVE-2026-99320
In the Linux kernel, the following vulnerability has been resolved: ipv6: raw: fix use-after-free in rawv6_send_hdrinc() rawv6_send_hdrinc() caches the route before handing the skb to l3mdev_ip6_out(). The VRF output path may replace skb->dst and release the original route, leaving the cached pointer stale. The function later dereferences that pointer for statistics accounting and as the output device passed to NF_HOOK(). Its RCU read-side critical section starts after l3mdev_ip6_out(), so it cannot prevent the old route from being reclaimed in between. Reload the route from the current skb destination after l3mdev_ip6_out() returns. KASAN reports a slab-use-after-free in rawv6_sendmsg(), with the route allocated by ip6_dst_alloc(), freed by dst_destroy() from rcu_core(), and the related RCU callback queued from vrf_l3_out().
-
CVE-2026-116441
Dell PowerStore SDNAS contains an out-of-bounds write vulnerability in the storage-processor interconnect driver that could allow a malicious peer to execute code with system privileges.
-
CVE-2026-99313
In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: fix race condition when accessing stale stack pointer The driver uses hidpp->send_receive_buf to point to a stack-allocated buffer in the synchronous command path (__do_hidpp_send_message_sync). However, this pointer is not cleared when the function returns. If an event is processed (e.g. by a different thread) while the send_mutex is held by a new command, but before that command has updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will observe that the mutex is locked and dereference the stale pointer. This results in an out-of-bounds access on a different thread's kernel stack (or a NULL pointer dereference on the very first command). Fix this by: 1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex in the synchronous command path. 2. Moving the assignment of the local 'question' and 'answer' pointers inside the mutex_is_locked() block in the handler, and adding a NULL check before dereferencing.
-
CVE-2026-99314
In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap() usb_stream_hwdep_mmap() reads us122l->sk.s and dereferences it without checking for NULL. The stream object is released by usb_stream_free(), which is reached through us122l_stop() both when the device is disconnected and when us122l_start() fails, and it leaves us122l->sk.s set to NULL. The hwdep file stays usable after that, so a later mmap() KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:usb_stream_hwdep_mmap+0x107/0x890 sound/usb/usx2y/us122l.c:182 crashes while reading s->read_size, which sits at offset 0x10. That NULL is an expected state for this field: usb_stream_hwdep_vm_fault(), usb_stream_hwdep_poll(), usb_stream_hwdep_ioctl(), usb_stream_stop() and usb_stream_free() all test it before use. Only the mmap callback misses the check, so let it return -ENODEV, matching what the other hwdep mapping in usx2yhwdeppcm.c does when its shared buffer has not been allocated.
-
CVE-2026-99318
In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close bcd2000_disconnect() calls snd_card_disconnect(), which only prevents new opens, and then frees the MIDI URBs. A rawmidi file that was already open can still be closed afterwards, and its close callback, bcd2000_midi_output_close(), calls usb_kill_urb() on midi_out_urb. The URB pointers are cleared on disconnect and their accesses are serialized with midi_lock, but bcd2000_midi_output_close() reads midi_out_urb without that lock. The check can therefore pass just before the pointer is cleared, and usb_kill_urb() then runs on the URB that has already been freed: BUG: KASAN: slab-use-after-free in usb_kill_urb+0x74/0x80 Read of size 8 at addr ffff8880078e7d40 usb_kill_urb bcd2000_midi_output_close close_substream rawmidi_release_priv snd_rawmidi_release Allocated by: usb_alloc_urb <- bcd2000_init_midi <- bcd2000_probe Freed by: usb_free_urb <- bcd2000_midi_free <- bcd2000_disconnect Take the lock in bcd2000_midi_output_close() and reference the URB with usb_get_urb() before releasing it. The URB then stays valid until usb_put_urb() after usb_kill_urb() has returned, even if a disconnect frees it in the meantime. usb_kill_urb() itself cannot run under midi_lock, as the completion handler takes the same lock.
A list of CVEs whose flaw type is memory safety, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.