Memory safety CVEs.
Published CVEs classified as memory safety, ranked by exploit odds.
-
CVE-2026-58778
In multiple locations, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-56938
In port_shutdown of ipc.c, there is a possible Use After Free due to a race condition. This could lead to local escalation of privilege with execution privileges needed. User interaction is for exploitation.
-
CVE-2026-99558
In the Linux kernel, the following vulnerability has been resolved: blk-crypto: fix NULL deref and UAF in __blk_crypto_evict_key() Sashiko reported a possible NULL pointer dereference, triggered by the following flow: dm-inlinecrypt ctor # first use of the fallback ├─ blk_crypto_init_key() # succeeds, ctx->key.size != 0 ├─ blk_crypto_start_using_key() │ ├─ hw-wrapped key: -EOPNOTSUPP │ │ # profile never allocated (NULL) │ └─ raw key: fallback_start_using_mode() │ └─ blk_crypto_fallback_init() fails │ └─ kfree(profile) # not NULLed ├─ goto bad └─ inlinecrypt_dtr() # evicts whenever key.size is set └─ blk_crypto_evict_key() └─ blk_crypto_config_supported_natively() = false └─ blk_crypto_fallback_evict_key() └─ __blk_crypto_evict_key(blk_crypto_fallback_profile) └─ profile->num_slots # BOOM!!! This issue can be reproduced using the following commands: dd if=/dev/zero of=/tmp/backing bs=1M count=64 LOOP=$(losetup -f --show /tmp/backing) SZ=$(blockdev --getsz $LOOP) KEY=$(head -c 64 /dev/urandom | od -An -tx1 | tr -d ' \n') dmsetup create ic --table "0 $SZ inlinecrypt aes-xts-plain64 \ $KEY 0 $LOOP 0 1 keytype:hw-wrapped" And the following oops is triggered: ================================================================== blk-crypto: loop0: no support for wrapped keys Oops: general protection fault, probably for non-canonical address 0xdffffc000000000b: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000058-0x000000000000005f] CPU: 5 UID: 0 PID: 901 Comm: dmsetup 7.3.0-rc3 #1 PREEMPT(lazy) RIP: 0010:__blk_crypto_evict_key+0x2e/0x3b0 Call Trace: blk_crypto_evict_key+0x24c/0x320 inlinecrypt_dtr+0xf6/0x160 inlinecrypt_ctr+0x2d3/0xbd0 dm_table_add_target+0x661/0xf40 table_load+0x1c4/0x490 ctl_ioctl+0x32f/0x5f0 dm_ctl_ioctl+0xe/0x20 ================================================================== dm-inlinecrypt is the only caller that can evict a key that was never started, as fscrypt frees such a key without evicting it. Fix this by returning early from blk_crypto_fallback_evict_key() when tfms_inited[] is not set for the key's mode. tfms_inited[] is only set after blk_crypto_fallback_init() has successfully initialized the profile, so the crash above is no longer reachable. The bug has been latent since commit c984ff1423ae ("blk-crypto: dynamically allocate fallback profile") was merged in v6.5, and only became actually triggerable when commit e7f57d2c47e2 ("dm-inlinecrypt: add target for inline block device encryption") was merged in v7.2.
-
CVE-2026-99556
In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize directory emptiness checks with readdir SMB2 QUERY_DIRECTORY holds fp->readdir_lock while it calls iterate_dir() on fp->filp. An SMB2 SET_INFO request with FILE_DISPOSITION_INFORMATION can resolve the same FileId and call ksmbd_vfs_empty_dir() on the same filp without that lock. iterate_dir()'s inode read lock permits concurrent readers and does not serialize per-file iterator state. ext4 stores its dx readdir cursor and fname RB tree in file->private_data. Concurrent reset or refill can therefore free a fname node while the other worker still traverses it or retains its RB-tree link, resulting in use-after-free accesses. An authenticated SMB client with list and delete rights on a directory in a writable KSMBD share backed by ext4 can trigger this when the directory takes the dx readdir path. The client overlaps an SMB2 QUERY_DIRECTORY request with an SMB2 SET_INFO request carrying FILE_DISPOSITION_INFORMATION on one live FileId. In one x86_64 SMP KASAN multi-shot guest using ksmbd-for-next at 171df27077fb, the unmodified kernel reported a cross-worker use-after-free before a panic. The first report's access and free stacks show the two request paths directly (trimmed): BUG: KASAN: slab-use-after-free in ext4_htree_store_dirent+0x488/0x550 Read of size 8 by task kworker/2:0/29 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ext4_htree_store_dirent+0x488/0x550 htree_dirblock_to_tree+0x535/0x990 ext4_htree_fill_tree+0x319/0xba0 ext4_readdir+0x175a/0x2f40 iterate_dir+0x1b6/0x630 smb2_query_dir+0x1003/0x1cc0 Freed by task 279: free_rb_tree_fname+0x67/0xc0 ext4_readdir+0x13a9/0x2f40 iterate_dir+0x1b6/0x630 ksmbd_vfs_empty_dir+0xa2/0x100 smb2_set_info+0x2ffa/0x45d0 Take fp->readdir_lock across the entire emptiness check. This places both iterators over that handle's filp in the same lock domain while preserving the disposition status handling. The exact code change completed a warning-free x86_64 KASAN bzImage build. Tracing three request pairs showed that the two iterate_dir() calls no longer overlapped and the expected statuses were preserved. A further 1,600 reproducer iterations completed with expected statuses and no KASAN report, Oops, or panic. The reproducer and complete guest configuration are available privately to maintainers on request.
-
CVE-2026-99554
In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: do not advance rx_skb->data on dropped frames For the 0x8513 chip, read_bulk_callback() skips the 2-byte receive header by advancing pegasus->rx_skb->data in place. This is done before the pkt_len > PEGASUS_MTU check, and when that check drops the frame the good path resubmits the same skb with the advanced rx_skb->data as the transfer buffer, still PEGASUS_MTU bytes long. Every frame with an oversized length field therefore moves the receive buffer two more bytes towards the end of the skb data area. A device that keeps sending such frames makes the host controller write received data over skb_shared_info and past the end of the allocation, and the corrupted skb_shared_info is used when the skb is eventually freed. With an emulated device sending frames filled with 0x5a on a KASAN kernel: BUG: KASAN: slab-out-of-bounds in dummy_timer+0xade/0x3f00 [dummy_hcd] Write of size 1536 at addr ffff888105821202 by task swapper/1/0 ... Oops: general protection fault, probably for non-canonical address 0xeb4b474b4b4b4b4c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x5a5a5a5a5a5a5a60-0x5a5a5a5a5a5a5a67] RIP: 0010:skb_release_data+0x36f/0x800 Only skip the header with skb_reserve() once the frame is going to be passed up, so the receive buffer always starts at the beginning of the skb data area. Unlike the old pointer adjustment, skb_reserve() also moves skb->tail, so the two header bytes now count against the buffer size: lower the length limit for the 0x8513 accordingly, otherwise a pkt_len of PEGASUS_MTU - 1 or PEGASUS_MTU would trip skb_over_panic(). Found by code review with LLM assistance and reproduced with an emulated USB device (raw-gadget + dummy_hcd).
-
CVE-2026-99544
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Bounds check the shared ring buffer indices In a CoCo VM the host is untrusted. Since the VMBus ring buffer read and write indices live in shared memory, the guest has to treat both as potentially malicious. hv_ringbuffer_write() copies into the ring at write_index with no bounds checking, so the host can make the guest write packet data at any offset up to 4 GiB past the start of the ring buffer. read_index matters too: the available space derived from both indices is the only bound on how much is copied, and an out-of-range index can make it far larger than the ring. The fix is to validate both indices before use and to use the validated snapshot instead of re-accessing. For invalid indices, hv_ringbuffer_write() logs and returns -EIO. One re-read of write_index is left unchecked in this patch: hv_get_ring_bufferindices() fetches it again for the prev_indices trailer. The value is only returned to the host and is not used as an offset or length for indexing. Since this is not a security issue, it is addressed later in the series. Open-coding the bytes available arithmetic keeps the fix free of prerequisites; a later patch refactors it into a helper function.
-
CVE-2026-99541
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix OOB read and cross-share confusion in ksmbd_validate_name_reconnect() ksmbd_validate_name_reconnect() indexes ab_pathname[share->path_sz + 1] without checking that the path is longer than share->path_sz + 1 (d_path() fills the buffer from the end). A durable fp is not bound to its original share, so a client can preserve a file from a short-path share and reconnect it on a long-path share, making strcmp() read past the PATH_MAX buffer - with a long enough share path this oopses the kernel, and on a mapped page it also gives a byte-equality oracle on adjacent heap (the reconnect succeeds exactly when the out-of-bounds string equals the requested name). A same-share variant with the durable fp at the share root reads 1 byte past the buffer (strlen(ab_pathname) == share->path_sz). Check before comparing: the path must be longer than share->path_sz, it must start with share->path, and the next character must be '/'. The share root itself is accepted only for an empty name.
-
CVE-2026-99540
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix parent dentry lifetime in directory enumeration ksmbd_populate_dot_dotdot_entries() builds the ".." entry from the open directory's d_parent and passes that pointer to ksmbd_vfs_fill_dentry_attrs() without taking a reference. That pointer is only valid while the directory stays under this parent. If a concurrent rename moves the directory elsewhere, the old parent loses its last reference; a following rmdir then turns it into a negative dentry with d_inode cleared, and after the RCU grace period the dentry itself is freed. The worker still holds the raw pointer and dereferences d_inode through vfs_getattr() and vfs_getxattr(). A remote SMB client, authenticated or guest, triggers this by listing a directory while that directory is moved under a new parent and the old parent is deleted. It can be done by the client itself with write access or by other concurrent writers, triggering null-ptr-deref and slab-use-after-free on a KASAN build. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:xattr_permission+0x9d/0x160 Call Trace: vfs_getxattr+0x9c/0x1b0 ksmbd_vfs_getxattr+0x82/0x100 ksmbd_vfs_get_dos_attrib_xattr+0x7f/0x130 ksmbd_vfs_fill_dentry_attrs+0x435/0x650 ksmbd_populate_dot_dotdot_entries+0x25e/0x630 smb2_query_dir+0xcf9/0x1a20 handle_ksmbd_work+0x5f1/0x1c80 process_one_work+0x90b/0x19d0 Fix by using the dentry reference counting APIs: take the parent with dget_parent(), take a matching dget() on ".", and dput() the dentry once ksmbd_vfs_fill_dentry_attrs() has returned or the pattern does not match.
-
CVE-2026-99532
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate security descriptor offsets before pointer arithmetic parse_sec_desc() constructs SID and DACL pointers by adding untrusted 32-bit offsets to the security descriptor before checking their bounds. The existing checks reject offsets into the descriptor header, but do not reject offsets beyond the descriptor's length. On a 32-bit kernel, a large offset can wrap the pointer before the descriptor. The end-only checks in parse_sid() and parse_dacl() can then accept it, allowing an authenticated SMB2 SET_INFO request to access memory outside the security descriptor and fault the kernel. Check each nonzero offset against acl_len before constructing its pointer. Initialize the optional owner and group SID pointers to NULL so an omitted SID remains absent when parsing the DACL.
-
CVE-2026-99529
In the Linux kernel, the following vulnerability has been resolved: wifi: b43: fix use-after-free in b43_bcma_remove() b43_one_core_detach() frees the struct b43_wldev it is given the bus device of. b43_bcma_remove() then reads wldev->dev again to free the bus device, which is a read of freed memory. b43_ssb_remove() does not have the problem: it takes a copy of wldev->dev at the start. Do the same here.
-
CVE-2026-99527
In the Linux kernel, the following vulnerability has been resolved: spmi: Fix potential use-after-free by grabbing of_node reference As noticed by Sashiko during a review run of an unrelated patch, in of_spmi_register_devices(), for_each_available_child_of_node() is used to loop through children, and to also assign a node to a newly created SPMI child device. Problem is that the refcount is dropped at every iteration so, in the specific case of DT overlays, a use-after-free may occur when an overlay is dynamically unloaded! To resolve this, increase the of_node refcount when assigning (in function of_spmi_register_devices) and release the reference in spmi_device_remove().
-
CVE-2026-99528
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix netns use-after-free in write_gssp() While fuzzing with a customized syzkaller, I hit a refcount warning in xprt_alloc(), reached from a write to /proc/net/rpc/use-gss-proxy: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0xf8/0x120 CPU: 0 PID: 10404 Comm: syz.0.17 Not tainted 7.3.0-rc1-00096-gcfebfd3db73d Call Trace: <TASK> xprt_alloc+0x83f/0x9d0 xs_setup_xprt+0xaf/0x3c0 xs_setup_local+0x47/0x7f0 xprt_create_transport+0x16c/0x730 rpc_create+0x38e/0x7f0 gssp_rpc_create+0xe2/0x180 set_gssp_clnt+0xba/0x1b0 write_gssp+0x200/0x310 proc_reg_write+0x240/0x330 vfs_write+0x2aa/0x1050 ksys_write+0x12a/0x250 do_syscall_64+0x117/0x750 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> create_use_gss_proxy_proc_entry() stores the struct net pointer as the proc entry's private data without taking a reference on it, and an open file descriptor does not pin the namespace either, as procfs only pins the proc_dir_entry. write_gssp() reads that pointer back with pde_data() and hands it to set_gssp_clnt(), which reaches xprt_init(): xprt->xprt_net = get_net_track(net, &xprt->ns_tracker, GFP_KERNEL); get_net_track() -> get_net() -> refcount_inc() is unconditional, so rpc_create() assumes its caller holds a reference on args.net. write_gssp() does not. Dropping the last ns.count reference does not make the file go away. __put_net() only queues cleanup_net() on a workqueue, and the remove_proc_entry() that fences off further writes runs from the rpcsec_gss pernet .exit method, that is, from inside cleanup_net(). A write landing between those two points increments a refcount that is already zero. cleanup_net() does not re-read ns.count, so the namespace is freed anyway and the rpc_xprt -- along with the AF_LOCAL socket opened for it -- is left pointing at freed memory. The resurrected count is visible to the rest of that teardown too: with CONFIG_IPV6_MROUTE the same cleanup_net() worker then trips !mr_can_free_table() in ip6mr_free_table(), which tests check_net() on the namespace it is freeing. It reduces to opening /proc/net/rpc/use-gss-proxy inside a new network namespace, calling setns() back to the original one to drop the last reference, and then writing "1" to the still-open descriptor. Take the reference in write_gssp() itself and refuse the write when the namespace is already gone. This is what procfs does for every other /proc/net file: get_proc_net() is maybe_get_net(PDE_NET(PDE(inode))) and seq_open_net() returns -ENXIO when it fails. PDE_NET() cannot be reused here because the parent directory /proc/net/rpc carries no namespace pointer. Adding a .pre_exit to rpcsec_gss_net_ops so the entry is removed earlier would only narrow the window, since pre_exit also runs from cleanup_net(). Live namespaces are unaffected: a write still returns the error from set_gssp_clnt(), a write of "2" still returns -EINVAL, and reads are untouched.
-
CVE-2026-99526
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free infoleak via the readdir resume name CIFSFindNext() copies the resume name that cifs_save_resume_key() recorded from the last entry of the previous response into its request; psrch_inf->presume_name points into the response buffer that entry came from, and nothing ever clears it. find_cifs_entry() records a new name only from a response with a usable last entry, and cifs_readdir() only from an entry it walks to, so a response that carries no entries and leaves last_entry NULL, because CIFSFindFirst() or CIFSFindNext() rejected LastNameOffset, refreshes neither and presume_name keeps pointing into the previous response. That buffer has already been released: by CIFSFindNext() before it installs the new response, or by find_cifs_entry() when it rewinds the search, which does not drop the name either and can then fail in initiate_cifs_search() before a new response replaces it. The next CIFSFindNext() then copies up to PATH_MAX - 1 bytes of the resume name out of the released buffer into its request and sends them to the server: a use-after-free read that leaks kernel memory to a malicious or compromised server, which can provoke it with a single FindNext response that carries no entries and a LastNameOffset above CIFSMaxBufSize, which is all the existing check rejects. With KASAN enabled, a server that answers a listing that way gives: CIFS: VFS: ignoring corrupt resume name ================================================================== BUG: KASAN: slab-use-after-free in CIFSFindNext+0x8ca/0x14c0 Read of size 4080 at addr ffff88807c823f98 by task ls/83 CPU: 0 UID: 0 PID: 83 Comm: ls Tainted: G B 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Tainted: [B]=BAD_PAGE Call Trace: <TASK> kasan_report+0xdf/0x1a0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 CIFSFindNext+0x8ca/0x14c0 cifs_readdir+0xf51/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 1 at 13.497119s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 Freed by task 83 on cpu 0 at 13.584018s: cifs_buf_release+0x41/0x80 CIFSFindNext+0xfce/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address is located 16280 bytes inside of freed 16588-byte region [ffff88807c820000, ffff88807c8240cc) ================================================================== The same memcpy() first reads past the end of that object while it is still live, a slab-out-of-bounds read that the following patches bound; that is the taint the report above carries. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Clear presume_name and resume_name_len whenever a new response is installed and when the rewind path releases the search buffer, so that the name never outlives the buffer it points into, and reset resume_key with them, since it was taken from the same entry and would otherwise be sent with an empty name. A response without a usable last entry then continues the search with an empty resume name rather than a stale one; CIFSFindNext() skips the copy of a zero-length name so that it never runs on the NULL pointer. The next patch in the series leaves last_entry NULL for a response that carries no entries, and bounds LastNameOffset against the received response rather than against CIFSMaxBufSize. Responses that are given a last entry today then take the path fixed here, so that patch must not be applied without this one.
-
CVE-2026-99525
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free in cifs_ses_add_channel() The error path of cifs_ses_add_channel() calls cifs_put_tcp_session() before cifs_chan_clear_need_reconnect(). The latter reaches cifs_ses_get_chan_index(), which dereferences server->terminate; if the put was the final reference, TCP_Server_Info is already freed and this is a use-after-free. Same put-then-use pattern as the recently fixed sibling in commit 717e0a25036b ("cifs: Fix server use-after-free in cifs_chan_skip_or_disable()"). Move the put last, but do not read chan->server after dropping chan_lock: chan points into ses->chans[], and once chan_count is decremented a concurrent add_channel can reuse the slot and overwrite the pointer, so the put would act on the new channel's server. Cache the pointer under chan_lock, clear the reconnect bit and decrement chan_count while still holding the reference, and release it after the unlock. This issue was discovered by Tencent CodeBuddy Security.
-
CVE-2026-99524
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix use-after-free of a local reenq node left on an inactive cpu A local DSQ reenq is queued on the rq through a per-sched node and run from deferred work. When the reenq is requested from dispatch, the work is a balance callback queued once dispatch is done. A cpu going down installs balance push early in its teardown, and queue_balance_callback() refuses new callbacks from then on. ops.dispatch() keeps running on that cpu until the rq goes offline after an RCU grace period, so a reenq it requests in that window may never run. The IMMED handling in dispatch_one() requests one the same way. A reenq requested from elsewhere for a cpu that is already offline goes through irq_work_queue_on(), which warns, and its work doesn't run until the cpu comes back. Either way the node stays on the rq's list. When the scheduler is freed, scx_sched_free_rcu_work() warns and frees the pcpu with the node still linked, and the list is walked again once the cpu comes back. An inactive cpu's local DSQ holds only tasks that are bound to it or are being moved off, so the reenq is pointless. Ignore reenqs of an inactive cpu's local DSQ. The test is lockless. The hotplug thread of a cpu going down runs on that cpu, and it marks the cpu inactive before it installs balance push. A dispatch on the cpu runs to completion before that thread can run there, so a dispatch that saw the cpu active has queued its callback by then. Requests from outside dispatch run from the wakeup path or through irq_work, which balance push doesn't affect. The grace period after the cpu goes inactive waits for any requester that saw it active, so that irq_work is queued while the cpu is online.
-
CVE-2026-99523
In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Fix DMABUF use-after-free during ufile cleanup The DMABUF release can race with ufile cleanup. When the cleanup holds hw_destroy_rwsem for write, uverbs_uobject_release() fails its trylock and leaves the uobject on the ufile list, but the dma_buf is freed as soon as the release returns. The cleanup then destroys the uobject and uses the freed dma_buf: BUG: KASAN: slab-use-after-free in uverbs_dmabuf_fd_destroy_uobj+0x46/0x200 Read of size 8 at addr ff11000109cf14b0 by task repro/435 Call Trace: uverbs_dmabuf_fd_destroy_uobj+0x46/0x200 destroy_hw_fd_uobject+0x3f/0x50 uverbs_destroy_uobject+0xc5/0x380 __uverbs_cleanup_ufile+0x1a8/0x260 uverbs_destroy_ufile_hw+0x54/0x160 ib_uverbs_close+0x34/0x110 Allocated by task 435: dma_buf_export+0x1b5/0x530 ib_uverbs_handler_UVERBS_METHOD_DMABUF_ALLOC+0x223/0x3f0 Freed by task 436: kfree+0x301/0x530 dentry_kill+0x14c/0x560 __fput+0x23a/0x4a0 rdma_user_mmap_entry_remove() dereferences the same pointer. Protect the stored dma_buf pointer with a mutex and clear it before release returns. Use a shared revoke helper so uobject destruction and mmap entry removal both skip a cleared pointer. Hold a temporary uobject reference across uverbs_uobject_release() and the pointer update. Use a separate mutex because uobject destruction can free the mmap entry before release finishes. Map and unmap use attachment->dmabuf directly, so they do not need to take the new mutex while holding the reservation lock.
-
CVE-2026-99522
In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: avoid use-after-free in icrdma_remove icrdma_remove() dereferences iwdev after calling irdma_ib_unregister_device(): irdma_ib_unregister_device(iwdev) -> ib_unregister_device(&iwdev->ibdev) -> __ib_unregister_device() -> ib_dealloc_device() irdma registers irdma_ib_dealloc_device() as the dealloc_driver callback in its ib_device_ops. The RDMA core explicitly documents ib_unregister_device() that when ops.dealloc_driver is used, ib_dev will be freed upon return from the function. The ib_device is embedded in struct irdma_device and iwdev itself was allocated by ib_alloc_device(irdma_device, ibdev). Consequently, once irdma_ib_unregister_device() returns, iwdev must no longer be dereferenced. However, icrdma_remove() currently accesses iwdev->rf afterwards when deinitializing interrupts, destroying ah_tbl_lock, and freeing rf. Although the final ib_device storage is released with kfree_rcu(), the object lifetime has already ended and callers must not rely on the RCU grace period to continue dereferencing iwdev. Save iwdev->rf before unregistering the RDMA device and use the saved pointer for the remaining cleanup. This issue was found by manual code inspection.
-
CVE-2026-99521
In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in mport_mm_close() A use-after-free vulnerability was identified in mport_mm_close() in drivers/rapidio/devices/rio_mport_cdev.c, identical to the pattern previously addressed in dma_req_free(). This is observable from userspace when an application creates an mmap mapping via the RapidIO character device and subsequently unmaps it (or terminates, triggering exit_mmap()). During munmap, mport_mm_close() is invoked and drops the mapping reference via kref_put(). If kref_put() drops the last reference, mport_release_mapping() is called, which frees the underlying rio_mport_mapping structure. The subsequent mutex_unlock() then dereferences map->md to unlock buf_mutex, leading to a use-after-free: mport_mm_close() -> mutex_lock(&map->md->buf_mutex); ... -> kref_put(&map->ref, mport_release_mapping); /* map is freed */ -> mutex_unlock(&map->md->buf_mutex); /* UAF: map used */ Fix this by caching map->md before kref_put() and using the cached pointer for mutex unlocking, ensuring that freed memory is not accessed.
-
CVE-2026-99520
In the Linux kernel, the following vulnerability has been resolved: pps: generators: fix use-after-free when closing a removed device The cdev of a PPS generator is embedded in struct pps_gen_device, but nothing ties the lifetime of that structure to the cdev: pps_gen is freed by the release function of its device, and an open file holds a device reference only until pps_gen_cdev_release() drops it. When the generator is unregistered while /dev/pps-genN is open, that put_device() drops the last reference and frees pps_gen, and __fput() then calls cdev_put() on the freed cdev: BUG: KASAN: slab-use-after-free in cdev_put+0x53/0x60 Read of size 8 at addr ffff88801383e138 by task ppsgen64/149 Call Trace: cdev_put+0x53/0x60 __fput+0x745/0xad0 fput_close_sync+0xd9/0x1b0 __x64_sys_close+0x86/0xf0 ... Freed by task 149: kfree+0x25a/0x6d0 device_release+0xca/0x3c0 kobject_put+0x169/0x320 pps_gen_cdev_release+0x51/0x80 __fput+0x36a/0xad0 pps.c had the same bug, fixed in commit c79a39dc8d06 ("pps: Fix a use-after-free"). Fix it the usual way: embed the struct device in pps_gen_device and register both with cdev_device_add(). This makes the device the parent of the cdev, so the cdev holds a device reference until the last file is closed.
-
CVE-2026-99519
In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix use-after-free of perf domain in netlink doit handlers The doit handlers dropped em_pd_list_mutex before dereferencing the perf domain, so a concurrent device unregister could free it while the reply was being built. Encode the reply from em_perf_domain_for_id() callbacks, which run under the mutex, and allocate the skb outside of it, like the dumpit path already does. This issue was found by an in-house static analysis tool.
-
CVE-2026-99518
In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wmi: fix use-after-free unregistering kbd_led led kbd_led_update_all() registers asus->kbd_led with devm_led_classdev_register() on the platform device, but kbd_led is embedded in struct asus_wmi, which asus_wmi_remove() frees at its end. The driver core calls .remove() before devres_release_all(), so the deferred devres release runs led_classdev_unregister() on memory that has already been freed. Whether that faults depends on whether the slab has been reused in between, which makes the crash on module unload intermittent and silently corrupts the led classdev state in the remaining runs. Unregister the led classdev explicitly in asus_wmi_led_exit(), after the led workqueue has been destroyed: kbd_led_work can then neither run nor be queued anymore, since asus_ref.asus is NULL too, so kbd_led_registered is stable and the classdev can be released while the memory embedding it is still alive. devm_led_classdev_unregister() also drops the devres entry, leaving nothing to run at unbind cleanup time; it warns when no devres entry exists, hence the kbd_led_registered check.
-
CVE-2026-99517
In the Linux kernel, the following vulnerability has been resolved: nvmet: fix use-after-free of the old registrant in nvmet_pr_preempt() nvmet_pr_preempt() handles a preempt sent by the reservation holder by changing the reservation type with nvmet_pr_update_reg_attr(), unless the reservation is of an All Registrants type. For the holder that helper does not modify the registrant in place: it puts a copy on the registrant list, points pr->holder to the copy and passes the old registrant to kfree_rcu(). If the reservation type changed, nvmet_pr_preempt() then hands ®->hostid of that old registrant to nvmet_pr_resv_released(). Unless the reservation released notification is masked, that function takes subsys->lock and compares the host id against every controller of the subsystem. The caller only holds pr->pr_sem and is not in an RCU read-side critical section, so nothing keeps the old registrant alive while it is read. The result is a read of 16 freed bytes that decides which controllers get the notification. Found by code inspection. kfree_rcu() defers the free, so it usually happens after the read; when the pending free is forced to run before the read, KASAN reports the host id as freed memory. Pass the host id of the controller that sent the command instead. The registrant was looked up by that host id, and the controller outlives the request.
-
CVE-2026-99516
In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: fix use-after-free in nvmet_fc_ls_create_connection() nvmet_fc_ls_create_connection() looks up the association with nvmet_fc_find_target_assoc(), which returns it with a reference held, and drops that reference as soon as the target queue has been allocated. iod->assoc is then dereferenced again by nvmet_fc_makeconnid() while building the connection id. The queue only borrows the pointer and takes no reference of its own. Once the lookup reference is dropped the association is kept alive solely by the reference taken when it was created, so a disconnect LS or a remote port unregister running concurrently can free it before nvmet_fc_makeconnid() reads it: BUG: KASAN: slab-use-after-free in nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:193 drivers/nvme/target/fc.c:1841 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021) Read of size 8 at addr ffff888179f1b000 by task kworker/u9:2/1167 Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nvmet-wq nvmet_fc_handle_ls_rqst_work Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:193 drivers/nvme/target/fc.c:1841 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021) process_scheduled_works (kernel/workqueue.c:3322 kernel/workqueue.c:3405) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (archkernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Freed by task 1167 on cpu 0 at 405.998150s: kasan_save_track (mm/kasan/common.c:57 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (include/linux/kasan.h:235 mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:1808 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021) process_scheduled_works (kernel/workqueue.c:3322 kernel/workqueue.c:3405) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (archkernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address belongs to the object at ffff888179f1b000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 0 bytes inside of freed 2048-byte region [ffff888179f1b000, ffff888179f1b800) Hold the lookup reference until the response has been built, and drop it on the error path as well.
-
CVE-2026-99515
In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix event queue release use-after-free iommufd_eventq_fops_release() drops the file's users reference before reading eventq->ictx. Once that reference is dropped, IOMMU_DESTROY in another thread can remove and free the event queue, so the later load accesses freed memory. Read ictx while the users reference still pins the event queue, then drop the reference and put the saved context. The context reference taken by iommufd_eventq_init() keeps ictx valid until the put. Fault and vEVENTQ file descriptors share this release path.
-
CVE-2026-99514
In the Linux kernel, the following vulnerability has been resolved: landlock: Fix superblock use-after-free in release_inode() Without this fix, release_inode() (task 1) can race with a umount operation in hook_sb_delete() (task 2). The order of operations in which the race occurs is: * task 2: hook_sb_delete() arrives at the end of the function, waiting for landlock_superblock(sb)->inode_refs to become zero. * task 1: release_inode(): does atomic_long_dec_and_test(), decrementing inode_refs to zero. * task 2: gets woken up through some other means, sees that inode_refs is zero and returns. The caller is the unmount operation and proceeds to release the superblock. * task 1: Runs wake_up_var(&landlock_superblock(sb)->inode_refs), *dereferencing the sb_security on the freed-up superblock*. Notably, wake_up_var() does not dereference the pointer passed to it, and only uses it to determine an overapproximated set of tasks to wake up. So while it's potentially possible for an attacker to provide a different value for that pointer, this only results in the wrong set of tasks getting woken up, and in this scenario, no further tasks are actually waiting. Nevertheless, KASAN detects it as a slab-use-after-free read on sb->s_security: BUG: KASAN: slab-use-after-free in release_inode+0x196/0x290 Read of size 8 at addr ffff888103b6c0a8 by task repro/217 release_inode+0x196/0x290 landlock_put_object+0x71/0x90 landlock_free_rules+0x38/0xc0 landlock_put_ruleset+0x47/0x130 fop_ruleset_release+0x33/0x40 __fput+0x305/0x780 Freed by task 54: kfree+0x11c/0x390 process_scheduled_works+0x766/0xe50 worker_thread+0x7bc/0xb20 The fix is to determine &landlock_superblock(inode->i_sb)->inode_refs only once earlier in release_inode(), and later use that precalculated address for the wake_up_var() call, without having to dereference through the superblock.
-
CVE-2026-99513
In the Linux kernel, the following vulnerability has been resolved: lockd: Fix use-after-free in nlmsvc_retry_blocked nlmsvc_retry_blocked() examines the block at the head of nlm_blocked under nlm_blocked_lock, then releases the lock before calling nlmsvc_grant_blocked() or retry_deferred_block(). The nlm_blocked list reference is all that keeps the block alive across that window. nlmsvc_grant_blocked() does take one of its own, but not until after the lock has been dropped. Unmounting the nfsd filesystem while a lock request is still blocked reaches nlmsvc_traverse_blocks(), which drops the list reference and frees the block along with the nlm_rqst hanging off it. BUG: KASAN: slab-use-after-free in nlm_async_call+0xd6/0x230 Read of size 8 at addr ffff88811b04c808 by task lockd/8377 nlm_async_call+0xd6/0x230 nlmsvc_retry_blocked+0x61c/0x800 lockd+0x144/0x1c0 Freed by task 8392: nlmsvc_release_block+0x231/0x290 nlmsvc_traverse_blocks+0x139/0x1b0 nlm_traverse_files+0x1aa/0xa00 nlmsvc_free_host_resources+0x12/0x60 nlm_shutdown_hosts_net+0x127/0x280 lockd_down+0xd5/0x1c0 Take a reference before releasing nlm_blocked_lock and drop it once the retry has run.
-
CVE-2026-99512
In the Linux kernel, the following vulnerability has been resolved: media: au0828: fix use-after-free in bulk_timeout timer on disconnect start_urb_transfer() arms dev->bulk_timeout, whose callback au0828_bulk_timeout() queues dev->restart_streaming; that work in turn calls start_urb_transfer() and re-arms the timer. au0828_dvb_unregister() cancels restart_streaming on disconnect but does not sync bulk_timeout. au0828_usb_release() then frees dev with kfree(), so a timer still armed or pending at that point can fire after the free and dereference dev through timer_container_of(). Sync the timer with timer_shutdown_sync() before cancel_work_sync(). The timer callback queues the work, so the timer must be stopped first; the shutdown variant is needed because the work re-arms the timer through start_urb_transfer(). The dvb->frontend == NULL early return guards the register-failure path where the timer was never set up. This bug was found by static analysis.
-
CVE-2026-99511
In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Fix use-after-free in cx23885_finidev due to race condition In cx23885_v4l2_dev_notify_init, &dev->cx25840_work is bound with cx23885_av_work_handler, and &dev->ir_rx_work and &dev->ir_tx_work are bound with cx23885_ir_rx_work_handler and cx23885_ir_tx_work_handler. cx23885_irq can schedule these works on system_wq when an AV_CORE interrupt is received, and the IR subdevice can also schedule the IR works from its interrupt service routine via the v4l2_device notify callback. If we remove the device, cx23885_finidev makes cleanup and the memory allocated for dev is released by kfree(dev), while the works mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | cx23885_irq | schedule_work(&dev->cx25840_work) cx23885_finidev | cx23885_input_fini(dev) | cx23885_ir_fini(dev) | cx23885_shutdown(dev) | free_irq(pci_dev->irq, dev) | pci_disable_device(pci_dev) | cx23885_dev_unregister(dev) | v4l2_device_unregister(v4l2_dev) | kfree(dev) | // dev is freed | | cx23885_av_work_handler | // use dev (use-after-free) Fix it by canceling the works after the IRQ handler that can schedule them has been stopped, and before proceeding with the remaining cleanup in cx23885_finidev. Note that the flush_work() calls in cx23885_input_ir_stop() do not close this race: they only wait for works that are already queued or running at that moment, they do not prevent the IRQ handler, which is still registered at that point, from scheduling the works again afterwards, and they are skipped entirely when dev->sd_ir is NULL. The cancel_work_sync() calls are therefore placed after free_irq(), the only point at which no new work can be scheduled.
-
CVE-2026-99510
In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix use-after-free in hackrf_alloc_urbs() error path hackrf_alloc_urbs() frees the URBs it allocated so far when one allocation fails, but leaves the entries in dev->urb_list[] and dev->urbs_initialized untouched. The caller, hackrf_start_streaming(), then calls hackrf_free_urbs() on the error path, which walks dev->urbs_initialized entries and calls usb_free_urb() a second time on the already-freed URBs, causing a use-after-free (slab-use-after-free Write in usb_free_urb()). Drop the redundant cleanup loop inside hackrf_alloc_urbs() and let hackrf_free_urbs(), which the caller already invokes on error, own the cleanup of the successfully allocated URBs.
-
CVE-2026-99509
In the Linux kernel, the following vulnerability has been resolved: media: imon: fix use-after-free in display_close via dev_dbg ictx->dev is a raw pointer to the usb_interface's embedded device. On disconnect, usb_disconnect() can drop the last reference on the interface and free it while a userspace fd for /dev/lcd0 is still open. When that fd is later closed, display_close() dereferences the now-freed ictx->dev via dev_dbg(), causing a use-after-free. Remove the dev_dbg() calls that dereference ictx->dev in display_close() and free_imon_context(), rather than taking a reference on the device.
-
CVE-2026-99508
In the Linux kernel, the following vulnerability has been resolved: media: ipu-bridge: Fix use-after-free in IVSC error path ipu_bridge_get_ivsc_acpi_dev() returns an ACPI device with a reference held. If no matching CSI device is found, ipu_bridge_check_ivsc_dev() drops that reference before passing the device to dev_err(). Concurrent CSI device and ACPI namespace removal can drop the other references, making this the final put. dev_err() then reads the freed struct acpi_device and its kobject name. This was reproduced without kprobes by racing normal CSI platform-device unregistration and ACPI configfs table removal against the production ipu_bridge_init() entry. KASAN reported the final free through device_release(), followed by invalid reads through _dev_err(). Emit the error message while the lookup reference is still held, then drop the reference as before. Source reproducers and vulnerable/fixed serial logs, with only the build hostname redacted, are available at: https://github.com/kimaiden1984-boop/linux-ipu-bridge-acpi-uaf-reproducer The fixed target builds with W=1 on x86-64. This was not tested on physical IPU hardware. The tests establish runtime reachability but do not measure occurrence frequency on shipping systems or establish exploitability.
-
CVE-2026-99507
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix use-after-free in hugetlb_mfill_atomic_pte() Let's fix another instance where we use a folio after dropping the PTL, where someone else could e.g., MADV_DONTNEED it once we drop the PTL, making us trigger a use-after-free on the folio.
-
CVE-2026-99506
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix use-after-free of a new anon folio For a fault in a private mapping with nothing in the page cache, hugetlb_no_page() allocates a folio, locks it and maps it. The folio has one reference, which belongs to the page table entry from then on. After dropping the page table lock the function still sets the migratable flag of the folio and unlocks it. Whoever zaps the entry in between frees the folio. The fault holds the fault mutex and the lock of the vma. MADV_DONTNEED and the first unmap of a hole punch, hugetlb_vmdelete_list(), do not take the fault mutex, and a private vma only has a lock if it owns a reservation map: not with MAP_NORESERVE, and not in the child after fork(). Then the flag is set in, and folio_unlock() is called on, a folio that is free or has a new owner. A surplus page goes back to the page allocator while it is locked: BUG: Bad page state in process init pfn:108e00 flags: 0x200000000000059(locked|uptodate|dirty|head|node=0|zone=2) page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set A page of the pool can be given to the next user, of any file, who locks it and loses the lock to the late folio_unlock(): kernel BUG at mm/filemap.c:1532! hugetlb_no_page+0x111b/0x23e0 hugetlb_fault+0x3a9/0x14a0 An unprivileged process is enough: threads that write to a MAP_PRIVATE | MAP_NORESERVE hugetlb mapping, threads that call MADV_DONTNEED on it, and one that takes the freed pages for another file. Until commit 3a47c54f09c4 ("hugetlbfs: revert use i_mmap_rwsem for more pmd sharing synchronization") the fault held i_mmap_rwsem for reading, which everybody who zaps takes for writing. The lock that commit bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs") gave to private vmas closed the window again, but only for those with a reservation map. Be done with the folio before the page table lock is dropped, as hugetlb_wp() is with its copy. The function already unlocks page cache folios under that lock. Original fix generated by an LLM and sent in private by Josef. [[email protected]: simplify+move comment]
-
CVE-2026-99505
In the Linux kernel, the following vulnerability has been resolved: apparmor: fix a use-after-free in aa_lookupn_ns() aa_lookupn_ns() takes a reference on the namespace it finds with aa_get_ns(), which is kref_get() on the reference count that the namespace is released through, without checking whether the namespace is still in use. A concurrent removal of a ":"-prefixed namespace looks the same namespace up and only then takes the parent lock to remove it, so the last reference can be dropped between the lookup and the aa_get_ns() call: the reference count then reports the increment on a zero count and the kernel classifies the following use of the object as a use-after-free. A user with CAP_MAC_ADMIN can trigger this by writing a ":<name>" removal and a ":<name>/<profile>" removal to /sys/kernel/security/apparmor/.remove concurrently. refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0xc0/0xe0, CPU#6 Call Trace: <TASK> aa_lookupn_ns+0xa9/0xc0 aa_remove_profiles+0x4fb/0x730 ? __kvmalloc_node_noprof+0x219/0x5c0 ? __pfx_aa_remove_profiles+0x10/0x10 ? aa_loaddata_alloc+0x65/0x1f0 ? _copy_from_user+0x2d/0x80 ? aa_loaddata_alloc+0x111/0x1f0 profile_remove+0x2ee/0x4a0 vfs_write+0x21e/0xcf0 ? rcu_core+0x29c/0x1740 ? timerqueue_linked_add+0x1f4/0x3d0 ? __pfx_vfs_write+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_rcu_core+0x10/0x10 ? __pfx_hrtimer_update_next_event+0x10/0x10 ? mutex_unlock+0x7b/0xd0 ? fdget_pos+0x24d/0x4b0 ksys_write+0xf7/0x1c0 ? __pfx_ksys_write+0x10/0x10 ? restore_fpregs_from_fpstate+0x37/0xc0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix by rejecting a namespace whose reference count is zero.
-
CVE-2026-99504
In the Linux kernel, the following vulnerability has been resolved: ASoC: audio-graph-card2: Fix use-after-free in audio_graph2_link_c2c() of_graph_get_next_port() consumes the reference of its prev argument. port0 is only borrowed from the caller's iterator, so the call drops a reference the function does not own, and port0 is dereferenced again afterwards. Pass an extra reference, as graph_count_c2c() does, so the reference the callee consumes is the one taken here.
-
CVE-2026-99503
In the Linux kernel, the following vulnerability has been resolved: ata: sata_fsl: Fix use-after-free of host_priv on probe() failure sata_fsl_host_stop() releases hcr_base and host_priv: static void sata_fsl_host_stop(struct ata_host *host) { struct sata_fsl_host_priv *host_priv = host->private_data; iounmap(host_priv->hcr_base); kfree(host_priv); } ->host_stop() is called by the driver core through the ata_host_stop() devres action which ata_host_start() registers, so it is called both when the device is unbound and when probe() fails after the host has been started. The error_exit_with_cleanup label of sata_fsl_probe() releases hcr_base and host_priv as well, and it is reachable from the two device_create_file() calls which are done after the host has been activated. In that case sata_fsl_host_stop() runs on an already freed host_priv, resulting in a use-after-free and a double iounmap()/kfree(). Add a separate error label for the failures happening after the host has been activated, which only detaches the host and leaves hcr_base and host_priv to sata_fsl_host_stop(). Note that ata_host_detach() is dropped from error_exit_with_cleanup, as that label is now only reachable while host is still NULL.
-
CVE-2026-99502
In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix double-free and NULL deref in zpci MSI domain cleanup zpci_remove_parent_msi_domain() dereferences zbus->msi_parent_domain unconditionally and does not clear it afterwards. zpci_bus_create_pci_bus() removes the domain when pci_create_root_bus() fails, then zpci_bus_release() removes it again on the last kref_put(), reading ->fwnode from the freed irq_domain and freeing it twice. If zpci_alloc_domain() or zpci_create_parent_msi_domain() fails, no domain is created at all; zbus is kzalloc'd, so the same release path dereferences NULL. Return early when there is no domain, and clear the pointer after removing one.
-
CVE-2026-99499
In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix use-after-free race in zpci floating interrupt cleanup zpci_clear_irq() stops the adapter from raising new interrupts for the function, but a zpci_floating_irq_handler() already running on another CPU can still be scanning zdev->aibv when zpci_msi_teardown_floating() releases it. Clear the zpci_ibv[] entry so no further handler picks the vector up, then wait for a grace period before releasing it. The handler runs inside the rcu_read_lock() section that do_airq_interrupt() holds across airq->handler(), so synchronize_rcu() drains any handler still in flight. Release the vector and free the summary bit only after the grace period, so neither can be reused while a reader still holds the old pointer. zpci_ibv served both delivery modes, indexed by function under FLOATING and by cpu under DIRECTED. Only the floating vectors are published to and torn down under the interrupt handler, so split the directed vectors out into zpci_dibv and annotate zpci_ibv __rcu, which lets sparse check the accessors above.
-
CVE-2026-99495
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix and improve zcrypt reply message verification checks Add or improve checks related to buffer sizes and reply sizes to the handling of replies from the crypto cards for CCA, EP11 (AP message type 6) and ICA (AP type 50) messages. The verification code related to reply field length was not designed well and thus firmware deficiencies could lead to unexpected behavior in the zcrypt device driver. Thus improve the code to more closely inspect especially length fields at message replies. Add length validation before accessing reply message structures in zcrypt_msgtype6_receive(), zcrypt_msgtype6_receive_ep11(), and zcrypt_msgtype50_receive() to prevent out-of-bounds reads and potential kernel memory disclosure. Also rework these three functions to validate reply lengths more carefully before copying data back into the request buffer. Use size_t for length calculations, reject inconsistent reply sizes, and add defensive handling for short invalid replies. For XCRB replies, validate both reply segments and derive the effective message length from the covered range instead of trusting only the second segment. Additionally improve some of the later invoked evaluation functions which further check the payload. Add comments about length assumptions and for the type50 processing rework the payload processing completely with removing a misplaced BUG_ON().
-
CVE-2026-99494
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix out-of-bounds ptr advance in cca_query_crypto_facility() The FQ reply parser code blindly advanced the walk pointer by a length value read directly from the hardware reply payload without checking that the advance stayed within the allocated reply buffer. A corrupt or malicious device response could push ptr beyond the cprbmem region, causing an out-of-bounds dereference or kernel memory exposure via the subsequent memcpy(). Fix this by tracking the remaining reply buffer space in a variable and validating each device-supplied length field against it before advancing or dereferencing the pointer.
-
CVE-2026-99491
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_intuos_pad wacom_intuos_pad() accesses wacom->shared->touch_input locklessly inside the interrupt handler context. If the Touch sibling device is disconnected, wacom_remove_shared_data() clears 'touch_input' outside any lock, creating a Time-of-Check to Time-of-Use (TOCTOU) race condition where a preempted reader in interrupt context dereferences the freed pointer, leading to a Use-After-Free. Resolve this by introducing RCU protection for the touch_input pointer: - Annotate 'touch_input' in wacom_shared struct with __rcu - Wrap all lockless readers in wacom_wac.c with guard(rcu)() and rcu_dereference() using a unified wacom_report_touch_mute() helper - Update writers in wacom_sys.c using rcu_assign_pointer() - Call synchronize_rcu() in wacom_remove_shared_data() to ensure all active RCU readers have finished before the input device is freed Also wrap wacom_set_shared_values() and touch/pen assignments in wacom_add_shared_data() inside the wacom_udev_list_lock to serialize concurrent probe assignments, and verify that 'shared->touch == hdev' before setting touch_input to prevent concurrent sibling probe state desynchronization.
-
CVE-2026-99490
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_bamboo_pad wacom_bamboo_pad_pen_event() accesses wacom->shared->pen locklessly relative to wacom_remove_shared_data() which nullifies it. This can lead to a Use-After-Free if the sibling device is removed while events are being processed. Resolve this by introducing RCU protection for pen and touch pointers: - Annotate 'pen' and 'touch' in wacom_shared struct with __rcu. - Wrap lockless readers in wacom_bamboo_pad_pen_event() with rcu_read_lock() and rcu_dereference(). - Update writers in wacom_sys.c using rcu_assign_pointer(). - Use rcu_dereference_protected for comparisons under wacom_udev_list_lock. - Also use rcu_access_pointer in wacom_sibling_pending() and wacom_mode_change_work() to avoid warnings (while lockless access in the latter remains a pre-existing issue).
-
CVE-2026-99489
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Redesign shared sibling data lifecycle The Wacom driver coordinates state between sibling interfaces of the same physical device using a shared structure 'wacom_shared' inside 'wacom_hdev_data'. The driver kept a volatile representative pointer 'data->dev' pointing to a sibling 'hid_device' for physical path comparisons during sibling matching. This pointer management is fragile. When the representative device is disconnected, wacom_remove_shared_data() failed to clear/update 'data->dev', leading to a Use-After-Free vulnerability when subsequent sibling probes dereference the dangling 'data->dev' pointer. Resolve this issue by redesigning the sibling data lifecycle: - Eliminate the volatile 'data->dev' representative pointer completely - Redesign 'wacom_hdev_data' to store stable static copies of the required attributes upon first allocation: 'phys' path string, 'vendor', 'product' IDs and the sibling's 'device_type' - Use these static attributes for stable sibling matching in wacom_are_sibling() and wacom_get_hdev_data() This ensures sibling matching remains safe and stable even if individual siblings are dynamically added or removed. To secure the lifecycle against concurrent probe/disconnect races: - Switch kref_put() to kref_put_mutex() in wacom_remove_shared_data() to serialize refcount drops with list traversal and lookup - Modify wacom_release_shared_data() to assume the list lock is already held Also, do not accumulate the 'device_type' capability flag during subsequent sibling probes. Keeping only the first probed sibling's device_type exactly preserves the original sibling matching behavior without introducing side effects.
-
CVE-2026-99488
In the Linux kernel, the following vulnerability has been resolved: klist: avoid accesses after waking klist_remove() klist_remove() waits until a node is unreferenced so that its caller can free the containing object. klist_release() currently publishes waiter->woken and wakes the waiter before its final accesses to the waiter and node. klist_remove() can then return, allowing its stack waiter and the containing object to be freed or reused while klist_release() is still running. In particular, bus_remove_driver() can free drv->p while __device_attach() walks the same bus klist with bus_for_each_drv(). On an arm64 Cortex-A72 system, an unpatched 7.2.0-rc3 kernel with CONFIG_PREEMPT_RT=y and CONFIG_KASAN=y reproduced the bug through the in-tree I2C/at24 path. KASAN reported a use-after-free in klist_dec_and_del() reached from klist_next()/bus_for_each_drv() while at24 was being unregistered. Clear n_klist and take a task reference before publishing woken. Use release/acquire accesses for that publication and wake the referenced task. The task reference keeps the waiter task alive if it returns and exits before wake_up_process().
-
CVE-2026-99487
In the Linux kernel, the following vulnerability has been resolved: rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML On UML, `warn_flags!` calls `warn_slowpath_fmt()` directly. Its third argument is a taint number, but `warn_on!` passes its bug flags there. As a result, `add_taint()` gets 2304 instead of 9 (`TAINT_WARN`). The warning is not recorded: `/proc/sys/kernel/tainted` stays 0 after `warn_on!` fires, where it should be 512. It also causes an out-of-bounds write in `add_taint()`. Pass `TAINT_WARN` directly, as C does on UML.
-
CVE-2026-99485
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: clear the mailbox channel pointer when starting it fails aie2_create_context() allocates a mailbox channel, starts it, and on a failed start frees it again: hwctx->priv->mbox_chann = xdna_mailbox_alloc_channel(ndev->mbox); ... ret = xdna_mailbox_start_channel(hwctx->priv->mbox_chann, ...); if (ret) goto free_channel; ... free_channel: xdna_mailbox_free_channel(hwctx->priv->mbox_chann); hwctx->priv->mbox_chann keeps pointing at the freed channel. That pointer is the driver's own test for whether a hardware context has a usable channel: aie2_destroy_context() returns early on NULL, aie2_sched_job_run() refuses to run a job on NULL, and the message helpers return -ENODEV on NULL. A stale pointer passes all of them. It matters on the restart path. aie2_hwctx_restart() calls aie2_create_context() again on a hardware context that is already live, after aie2_hwctx_stop() has torn its channel down, and the context survives a failure there: aie2_sched_job_timedout() discards the return value entirely, and aie2_hwctx_resume() only propagates it. What is left is a live hardware context holding a freed channel, and every later user of it takes the non-NULL branch: - the next job submitted reaches xdna_mailbox_send_msg() on the freed channel, via the !mbox_chann guard in aie2_sched_job_run(), - a second command timeout reaches aie2_hwctx_stop() -> aie2_destroy_context(), - closing the device reaches aie2_hwctx_fini() -> aie2_release_resource() -> xrs_release_resource() -> aie2_xrs_unload() -> aie2_destroy_context(), and aie2_destroy_context() then calls xdna_mailbox_stop_channel() followed by xdna_mailbox_free_channel() on memory that was already freed: a use-after-free, and a second free of the same channel. The AIE4 management channel already does this correctly - aie4_mailbox_start() clears ndev->aie.mgmt_chann right after freeing it. Do the same here. The create path itself is not affected: when aie2_xrs_load() fails, xrs_allocate_resource() removes the solver node without calling ->unload, and aie2_hwctx_init() frees hwctx->priv, so the stale pointer never outlives the structure holding it. Starting a channel can fail today without this patch: the ring buffer sizes firmware reports are rejected unless both are powers of two, and request_irq() can fail.
-
CVE-2026-99484
In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: Fix UAF of soundfont zones at note-on snd_emux_note_on() looks up the matching zones via snd_soundfont_search_zone(), which takes sflist->lock only during the lookup and returns the raw zone pointers after releasing it. The caller then stores them in vp->zone without any protection. Meanwhile, a concurrent SNDRV_EMUX_IOCTL_REMOVE_LAST_SAMPLES ioctl may unlink and free those zones in snd_soundfont_remove_unlocked(); this leads to a use-after-free in snd_emux_note_on(), and later at accessing the cached vp->zone, e.g. in snd_emux_send_effect(). Fix it by holding sflist->lock in snd_emux_note_on() over the whole zone lookup and voice setup, and let snd_soundfont_search_zone() require the caller to hold the lock, instead. snd_soundfont_lock_preset() takes sflist->lock for setting presets_locked, so the removal path now syncs with the note-on finish.
-
CVE-2026-99483
In the Linux kernel, the following vulnerability has been resolved: ALSA: pcmtest: handle multiple wraps in random capture fill The random capture helpers assume that the data generated for one timer tick wraps the DMA ring at most once. However, b_rw describes 200 ms of audio because the timer runs at 5 Hz, so it can be several times larger than a small ring. For 48 kHz, S16_LE, four-channel capture with a 512-frame buffer, the DMA ring is 4096 bytes while one tick generates 76800 bytes. After filling the 4096-byte tail, the existing code issues a second 72704-byte write from the ring base, writing 68608 bytes beyond the ring. Both interleaved and non-interleaved capture are affected. KASAN reports the first write into the adjacent free page as a use-after-free in the random-byte generator. The underlying defect is an out-of-bounds write from the live DMA ring, not a stale DMA allocation. Split each random write repeatedly at the interleaved ring or per-channel block boundary. Keep the hardware-pointer update exactly once after the complete logical write. The issue reproduced on three of three clean boots. With this change, the same vulnerable geometry completed six times without a sanitizer finding. Boundary, pattern-fill, no-timer, open/close, and module-reload controls also completed normally. snd-pcmtest is a test driver, and selecting random fill requires an administrator-controlled module parameter. The written values come from the kernel random generator; no privilege escalation or attacker-controlled write primitive was demonstrated.
-
CVE-2026-99482
In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: ps: fix snd_acp63_remove() teardown ordering The ACP IRQ handlers dereference the SoundWire, SoundWire DMA, and PDM child platform devices, but snd_acp63_remove() unregisters them while the interrupt is still held by devres, which frees it only after remove returns. An interrupt in this window is a use-after-free. Mask the ACP interrupt sources and call devm_free_irq() before the first child device is unregistered. The masking goes through the new acp_hw_ops->disable_interrupts callback, keeping the remove path platform-agnostic. The interrupt line is shared, and acp_hw_deinit() clears the sources only after the children are gone, which would leave the line raised with no handler left to ack it. The window predates the tagged refactor, which only reshaped the dereferences. devm_free_irq() waits for in-flight handlers, but not for work the hardirq has already queued: acp63_irq_handler() schedules amd_sdw_irq_thread on the SoundWire manager. Draining that work in the manager's remove path is a soundwire-side change and follows separately. This issue was found by an in-house static analysis tool.
-
CVE-2026-99480
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix TOCTOU race between GROUP_REGISTERED check and erase panthor_group_destroy() checks the GROUP_REGISTERED mark and then calls xa_erase() without holding the xarray lock across both. If the handle is destroyed by another thread in between, and a concurrent GROUP_CREATE reuses the freed ID, the first destroy erases and releases the new, still-initializing group, leading to a use-after-free in panthor_group_create(). Do the mark check and erase atomically under xa_lock().
A list of CVEs whose flaw type is memory safety, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.