Code execution CVEs.

Vulnerabilities in the affected interface of AOS-8 could allow an unauthenticated remote attacker to bypass existing authentication controls and run arbitrary commands on the underlying host. Successful exploitation could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Code execution

Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release.

Code execution Server Apache Camel

The Mang Board plugin for WordPress is vulnerable to Arbitrary File Upload in version 2.4.4 via the mbw_file_upload function. This is due to missing file extension validation on the attacker-supplied image_path parameter, whose basename-derived file name bypasses the extension allowlist applied only to the separate file_name parameter. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. Exploitation requires the board to be configured to allow guest posts, which is the plugin's default mode; the required nonce is printed on every public board page, making it readable by any unauthenticated visitor without a WordPress login.

Code execution Web app

Xerte Online Toolkits through 3.15.5 contains a remote code execution vulnerability that allows authenticated users with system permission to run PHP by importing a crafted language pack. Attackers can upload a ZIP via import_language.php containing a .inc file, then request it through the language parameter to execute code on the server.

Code execution Web app

MLflow is an open source AI engineering platform for agents, large language models, and machine learning models. From 3.12.0rc0 until 3.17.0, the scorer invoke, register, and GenAI evaluate endpoints, including unauthenticated POST /ajax-api/3.0/mlflow/scorer/invoke, accept serialized third-party scorer data that Scorer.model_validate_json resolves using a module-path allowlist without constraining the selected class or its constructor arguments. When optional trulens and trulens-providers-litellm packages are installed, an attacker can select mlflow.genai.scorers.trulens, choose a model URI outside MLflow's native provider registry so execution uses the LiteLLM fallback, and supply api_base and api_key values that cause the server to send an outbound request to an attacker-chosen or internal host with attacker-controlled headers and body. The vulnerable deserialization occurs before a tracking-store lookup or job submission. This issue is fixed in version 3.17.0.

Code execution Library

Remote Code Execution in the `IModular.exe` URI handler in INFINITT Healthcare Co., Ltd. INFINITT PACS allows a remote unauthenticated attacker to invoke unintended application functionality and potentially execute arbitrary code via a crafted `imodular:// URI` containing attacker-controlled command and argument parameters.

Code execution

Hestia Control Panel is a lightweight and powerful control panel for the modern web. From version 1.9.7 through 1.10.4, update_object_value() in func/main.sh does not escape single quotes when writing a custom document-root value to a user's web.conf file, allowing a low-privileged authenticated panel user with a web domain to inject an additional PATH field. When the user invokes the ordinary Search feature, the root-privileged v-search-user-object script loads the forged field through parse_object_kv_list_non_eval(), which permits reserved shell-variable names and globally replaces PATH before invoking column without an absolute path. By placing a malicious column executable in the injected search path, the user can execute arbitrary code as root. This residual vulnerability was introduced when version 1.9.7 replaced the raw eval sink addressed by CVE-2026-84984 with parse_object_kv_list_non_eval(), and it is fixed in version 1.10.5.

Code execution Web app

The LifterLMS – WP LMS for eLearning, Online Courses, & Quizzes plugin for WordPress is vulnerable to Local File Inclusion in versions up to, and including, 10.3.1 via attacker-controlled attributes of the [lifterlms_checkout] shortcode. This is due to the llms_get_template() helper performing extract() on the shortcode attribute array before resolving the template path, which allows the attacker-supplied 'template_name' and 'default_path' shortcode attributes to overwrite the function's local parameters and ultimately control the path passed to a PHP include. This makes it possible for authenticated attackers, with Instructor-level access and above, to include and execute arbitrary files on the server, that can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where files with safe extensions containing attacker-controlled content can be uploaded and included.

Code execution Web app

F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. From 4.1.0 until 4.2.0, Svc::GenericHub output-port dispatch is vulnerable because the deserialized port field is passed to serialOut_out, bufferOut_out, eventOut_out, or tlmOut_out without an explicit range check. When a remote hub packet supplies a port index outside the configured output-port array, assert-enabled builds abort, while builds without assertions can access an output-port array out of bounds, corrupt heap memory, and potentially allow remote code execution. This issue is fixed in version 4.2.0.

Code execution Device

Coze Studio before 0.5.0 contains an insecure default configuration that allows any registered user to execute commands by running workflow code nodes in an unsandboxed python3 subprocess. Attackers can bypass the regex import filter with __import__('subprocess') to run commands, stealing environment variables, model API keys, and accessing MySQL, MinIO, Redis and etcd.

Code execution Server

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From 2.7.0 until 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2, Kustomize passes ref or version query values from remote resource, base, or component URLs to git fetch without an end-of-options separator. A leading-hyphen value can be parsed as --upload-pack and execute a command inside argocd-repo-server when the remote uses a local transport such as file://. Git does not run the supplied command for an https:// remote. The local transport does not leave the pod, so blocking repo-server egress does not prevent the execution. The command runs as the repo-server user, can read repository credentials and other process-accessible data, and can return output through manifest-generation errors. An attacker can commit a Kustomization to a Git repository that an Application builds or upload files through POST /api/v1/applications/manifestsWithFiles, also exposed by argocd app diff --local --server-side-generate. The upload path requires only Application get permission on an existing Application, without Application update or sync permission or repository write access. Kustomize 5.0.0 introduced acceptance of file://, whereas 4.5.7 rejects that transport; replacing the affected Kustomize with a newer version alone does not correct the missing option separator. This issue is fixed in versions 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2.

Code execution Server

IBM Langflow OSS 1.0.0 through 1.12.3 could allow a remote authenticated attacker to execute arbitrary code due to deserialization of untrusted data.

Code execution Web app Langflow

NOsql Object (NO2 a.k.a Nitrite) database is an open source nosql embedded document store. Prior to version 4.4.1, when Nitrite opens a database file, MVStoreUtils.openOrCreate() automatically checks for a legacy v1-format store and, on detecting one (or hitting a compatibility error while opening), triggers an automatic migration path. This path deserializes stored values using NitriteDataType.deserialize(byte[]), which passes the raw bytes directly to java.io.ObjectInputStream.readObject() via a custom NitriteObjectInputStream subclass. That subclass overrides only readClassDescriptor() — solely to remap a handful of known legacy class names to their current equivalents — and implements no class allowlist, blocklist, or ObjectInputFilter (JEP 290). Any Serializable class reachable on the embedding application's classpath can therefore be instantiated via readObject(), with readObject()/readExternal()/readResolve() callbacks invoked unconditionally. If a suitable gadget class (e.g. from commons-collections or similar) happens to be present on the classpath, this is a precondition for remote code execution. This issue has been patched in version 4.4.1.

Code execution Device

The Avada | Website Builder For WordPress & WooCommerce theme for WordPress is vulnerable to Arbitrary File Upload in versions up to, and including, 7.16.2 via the convert_palette_images_to_truecolor() function. This is due to insufficient file type validation before processing uploaded files. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible.

Code execution Web app

In JetBrains Datalore before 2026.4 code execution was possible in another user's computation via an init script upload race condition

Code execution Library

An issue in Webasyst Framework 4.0.3 and before allows a remote attacker to execute arbitrary code via a crafted OAuth authorization URL with an arbitrary redirect_uri.

Code execution Web app

Redpanda Connect versions 4.39 to 4.110 contain a missing authentication vulnerability that enables unauthenticated remote code execution (RCE). In streams mode, the management HTTP API is exposed on `0.0.0.0:4195`, but authentication is disabled by default and there is no authentication gate protecting the stream CRUD routes. An unauthenticated attacker with network access to TCP/4195 can `POST` a malicious pipeline definition to `/streams/{id}` that includes code-executing processors such as `command`, `subprocess`, `ffi`, or unsafe `sql_raw`, thereby achieving arbitrary RCE on the host with the permissions of the Redpanda Connect service account. Because pipelines can also return command output in-band via HTTP, this vulnerability enables full host compromise, credential theft, and data exfiltration with no user interaction or credentials required. Starting with v4.111, the API endpoint was reconfigured as opt-in, so this and later versions are no longer vulnerable by default. However, RCE remains achievable on v4.111 and later if the management API is manually enabled via the `--bind-http` flag.

Code execution Server

Unsafe binary deserialisation in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows an authenticated user to cause a denial of service via memory exhaustion. Users are recommended to upgrade to version 3.5.3, which fixes this issue.

Code execution Server

The Contact Manager plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 9.1.2 via the add_message function. This is due to an incomplete extension blacklist that fails to detect dangerous extensions when a trailing dot causes the extension-derivation routine to return an empty string, which sanitize_file_name() then silently removes before the file is written to disk. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. Successful code execution additionally requires the server to use Apache with libapache2-mod-php (which maps .phar to PHP by default) and the attacker to retrieve the uploaded file within the brief window before it is removed by unlink() at end of request.

Code execution Web app

WidzialniCMS is vulnerable to Unrestricted File Upload in the /panel/controllers/save_photo.php endpoint. Due to a client-controlled permission check parameter and insufficient validation of the currentpath parameter, an unauthenticated attacker can upload arbitrary files to any locations on the server, leading to Remote Code Execution. This issue has been fixed in version 2.5.

Code execution Web app

Inclusion of functionality from untrusted control sphere in .NET allows an unauthorized attacker to execute code over a network.

Code execution Library

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, msrp_parse_buffer() subtracted delimiter framing from a peer-controlled short segment whose MSRP byte range ended in * without first proving the segment was long enough. The unsigned result wrapped near SIZE_MAX and reached switch_msrp_msg_set_payload() as both an allocation size and memcpy length, while related pointer arithmetic could read before the receive buffer. The listener is disabled by default in msrp.conf.xml, but any deployment enabling an MSRP TCP or TLS port parses this framing before authentication. An unauthenticated network peer can corrupt memory and crash FreeSWITCH, dropping all active calls, although remote code execution has not been demonstrated. This issue is fixed in version 1.11.2.

Code execution Freeswitch

n8n before 2.42.6, 2.43.x before 2.43.3, and 3.x before 3.0.1 contains a remote code execution vulnerability via deprecated Function, Function Item, and LangChain Code nodes running outside task runner isolation. Authenticated users who can create, modify, or import workflows naming these hidden node types can execute JavaScript in the n8n main process.

Code execution

Untrusted search path in Windows Update allows an authorized attacker to elevate privileges locally.

Code execution OS & kernel Microsoft Windows 11 23h2

The Post Export Import with Media plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.17.1 via deserialization of untrusted input . This makes it possible for authenticated attackers, with administrator-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present.

Code execution Web app

rConfig Core 8.0.0 before 8.2.19 and rConfig Pro before 8.4.1 contain a deserialization of untrusted data vulnerability that allows unauthenticated network attackers to execute arbitrary code by pushing a crafted serialized job onto the Redis-backed Laravel Horizon queue, which runs without authentication in affected deployments. Laravel's CallQueuedHandler unserializes the job without class restrictions, allowing attackers to instantiate the existing App\\Jobs\\TaskDownloadRun class and invoke an attacker-controlled Artisan command. Attackers can leverage the bundled laravel/tinker package to execute arbitrary PHP and operating system commands as the queue worker's user, write a persistent web shell into the web-served storage/app/public directory, and read database credentials, stored device credentials, and API tokens. Where Redis is not directly reachable, authenticated attackers can deliver the payload through the application by configuring a device target that points at the rConfig server's loopback address.

Code execution Web app

Quest Foglight for Databases baseRmiServiceExporter Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest Foglight for Databases. Authentication is not required to exploit this vulnerability. The specific flaw exists within the configuration of the baseRmiServiceExporter bean. The issue results from the lack of proper validation of user-supplied data prior to deserializing it. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-29170.

Code execution Server

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, udptl_rx_packet() used a peer-controlled FEC entry count directly to fill five-entry FEC arrays in a mod_spandsp T.38 session. A larger count wrote sender-controlled error-recovery data beyond those arrays and persisted the oversized count for a later reconstruction pass. Any peer able to deliver UDPTL to an established T.38 fax session can reach the parser, including deployments using fax applications or a T.38 gateway. The memory corruption can crash FreeSWITCH and end every active call, although remote code execution has not been demonstrated. This issue is fixed in version 1.11.2.

Code execution Library Freeswitch

Off-by-one error in Microsoft Office Word allows an unauthorized attacker to execute code over a network.

Code execution Microsoft 365 Apps

Xen Orchestra before 6.9.0 contains an improper access control vulnerability that allows any authenticated user to become global administrator by abusing the unprotected vm.importFromEsxi and vm.importMultipleFromEsxi methods. Attackers can point xo-server at a malicious ESXi host serving a crafted .vmx file with __proto__.permission set, polluting Object.prototype so permission-less accounts inherit admin rights and enabling remote code execution.

Code execution Server

Craft CMS 4.x before 4.18.8 and 5.x before 5.11.0 contains a blocklist bypass in the Twig create() function because its class-name checks are case-sensitive while PHP class resolution is not. Attackers with template-execution rights, such as Control Panel administrators, can instantiate SplFileObject via a lowercase class name to read .env secrets or write a PHP file into the webroot for remote code execution.

Code execution Web app

The WP Duplicate WordPress plugin through 1.1.11 does not properly verify a request authentication value and does not validate the path or type of uploaded files, making it possible for unauthenticated attackers to write arbitrary files to the server and achieve remote code execution. This vulnerability is being actively exploited in the wild.

Code execution Web app

The Checkout Files Upload for WooCommerce WordPress plugin before 2.4.0 does not validate uploaded file types when its accepted file types setting is left empty, which it documents as the way to accept all files, allowing unauthenticated users to upload arbitrary files, including PHP files that lead to remote code execution on servers that execute PHP from the uploads directory.

Code execution Web app

Type confusion in WebFonts in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low)

Code execution Browser & mail Google Chrome

Spreadsheet::XLSX versions before 0.19 for Perl allow code execution via string eval of number format conditions in ExcelFmt. When a number format has a condition such as [>100], ExcelFmt chooses the format section by passing the condition and the cell value to a string eval. Both come from the workbook, and the eval runs while Spreadsheet::XLSX->new parses it. An attacker who supplies an XLSX file can run arbitrary Perl code.

Code execution Library

TwigView plugin for CakePHP provides wrappers for common View operations and extensions that expose CakePHP functions and jasny/twig-extensions helpers. Prior to versions 1.3.3 and 2.1.2, the unserialize filter has no restriction on which classes are allowed. This can used as a deserialization remote-code-execution gadget. This issue has been patched in versions 1.3.3 and 2.1.2.

Code execution Web app

Quest Foglight for Databases writeTopologySectionToFile External Control of File Path Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest Foglight for Databases. Authentication is not required to exploit this vulnerability. The specific flaw exists within the writeTopologySectionToFile method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-29169.

Code execution Server

Apache Airflow's Task Execution API stored XCom values written by a task without the reserved-key check applied elsewhere, so a Dag author's task could write an XCom that, when a user later viewed it through the API with deserialization enabled, made the API server instantiate classes from the `airflow.*` namespace with arguments the Dag author chose. This is an incomplete fix for CVE-2026-59242: users who applied that fix in apache-airflow 3.3.1 remain affected through this route and should upgrade to apache-airflow 3.4.0 or later.

Code execution Server

Uncontrolled search path element in package upload feature in Chaos Software V-Ray versions through 2.0.19 allows remote unauthenticated attackers to execute arbitrary code via redirecting access to libraries

Code execution Library

A path traversal vulnerability allows a remote unauthenticated attacker to execute arbitrary code as root in Sophos UTM (all versions) after winning a race condition by sustaining repeated attacks for a few minutes when the email proxy is used with scanning enabled. Sophos UTM is end-of-life and the patch must be installed manually.

Code execution

IBM Langflow OSS 1.0.0 through 1.12.3 could allow a remote attacker who could reach the message broker to execute arbitrary code on the system due to the deserialization of untrusted data.

Code execution Langflow

The Ultra Addons for Contact Form 7 plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the _getObjAttr function in all versions up to, and including, 3.5.54. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). This requires the PDF Generator add-on to be active and a Contact Form 7 form to be configured for PDF generation, as the WPCF7_Submission POP gadget chain relies on CF7 being present to complete the file deletion via __destruct(). Note: This vulnerability can only be exploited when the PDF generator feature is enabled.

Code execution Web app

The Project Manager – AI Powered Project Management, Task Management, Kanban Board & Time Tracker plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.1.1 via the 'id' parameter parameter. This is due to unsanitized 'id' parameter value concatenated directly into the pipe-delimited validation rule string, which is then split and each token invoked as a dynamic PHP function with no allowlist check. This makes it possible for unauthenticated attackers to execute code on the server. This is exploitable by unauthenticated attackers because WordPress core executes the route argument's validate_callback inside WP_REST_Server::dispatch() before the route's permission_callback is invoked, meaning the Project_Manage_Capability authorization gate is never reached on the vulnerable code path.

Code execution Web app

Untrusted search path in Windows Update allows an authorized attacker to elevate privileges locally.

Code execution OS & kernel Microsoft Windows 11 23h2

Unsafe reflection in the error mitigation schema validation in Amazon Braket Schemas before 1.32.2 might allow a remote authenticated user with S3 write access to the quantum task output location to execute arbitrary code on any machine that retrieves the quantum task results via a crafted task result document. We recommend you upgrade to amazon-braket-schemas version 1.32.2 or later.

Code execution Amazon amazon-braket-schemas

The ELEX WordPress HelpDesk & Customer Ticketing System plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 3.3.7 via the initMailPart function. This is due to insufficient file type validation when saving IMAP email attachments. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible.

Code execution Web app

The WPSyncSheets For Contact Form 7 – CF7 Google Sheets Connector & Save to Database plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.8.0 via the 'any non-system CF7 field (e.g., your-message)' parameter parameter. This is due to insufficient sanitization of CF7 submission field values before database storage and the absence of an allowed_classes restriction on maybe_unserialize() during admin retrieval. This makes it possible for unauthenticated attackers to execute code on the server. Successful exploitation of the remote code execution gadget chain requires that a Google Sheets access token be configured in the plugin (its primary advertised feature), as this triggers autoloading of the bundled Monolog 2.10.0 library whose classes form the exploitable gadget chain; however, the underlying PHP Object Injection occurs regardless.

Code execution Web app

Improper isolation or compartmentalization vulnerability in Apache Syncope. An administrator with adequate entitlements for Implementations can create a malicious Groovy class running untrusted code on a separate Thread, thus bypassing the Groovy security sandbox. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.8, from 4.1.0-M0 through 4.1.3. Users are recommended to upgrade to version 4.0.9 / 4.1.4, which fix this issue.

Code execution Web app

**UNSUPPORTED WHEN ASSIGNED**  JavaNativeMessageDecoder in the MINA 3.0 codec module calls ObjectInputStream.readObject() on frame bytes with no class filter, so an application that puts it in front of an untrusted peer is open to gadget-chain RCE. As the 3.0.0 branch is inactive, we do not plan to release a version that fixes this issue. Users are recommended to use the latest Apache MINA 2.2.X branch.

Code execution Library

ILIAS before 9.24, 10.12, and 11.5 contains a PHP object injection vulnerability that allows authenticated users with Test creation or import permission to deserialize arbitrary objects via crafted Test archives. Attackers can inject a malicious tst_sequence sequence attribute that is passed to unserialize(), abusing Guzzle or Monolog gadget chains to write PHP files and execute code.

Code execution Web app