Auth & access CVEs.
Published CVEs classified as auth & access, ranked by exploit odds.
-
CVE-2026-129277
N-able N-central before 2026.4.1 HF3 does not authenticate callers of the MaintActionGet operation. A remote, unauthenticated attacker can read and cancel the pending maintenance actions of any appliance.
-
CVE-2026-129278
N-able N-central before 2026.4.1 HF3 does not authenticate callers of the ServerII2 remoteControlMSPAStartEndTimeSubmit operation. A remote, unauthenticated attacker can alter the recorded state and times of Take Control remote control tasks and the associated audit log entries.
-
CVE-2026-17049
IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to obtain sensitive information and modify arbitrary documents due to authorization bypass through user-controlled keys.
-
CVE-2026-115642
In OpenStack keystonemiddleware before 13.0.2, by supplying a custom X-Service-Token header in a request, anyone in possession of an access-restricted application credential may bypass those restrictions resulting in elevation of privileges.
-
CVE-2026-114139
Sentry-Javascript is an official Sentry SDKs for JavaScript. From 9.36.0 until 9.47.2, 10.75.2, and 11.0.0-rc.1, the webpack integration for @sentry/nextjs skips application middleware for every request path under a configured tunnelRoute, while the tunnel rewrite serves only the exact tunnel path with valid o and p query parameters. When an application route directly collides with the tunnel path or a root dynamic segment resolves under it, an unauthenticated request can reach that route without middleware authorization. Exploitation requires tunnelRoute, a webpack build, a colliding route, and middleware being the only authorization control. This issue is fixed in versions 9.47.2, 10.75.2, and 11.0.0-rc.1.
-
CVE-2026-92191
Quest Foglight for Databases runScript Incorrect Authorization Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest Foglight for Databases. Authentication is required to exploit this vulnerability. The specific flaw exists within the runScript function. The issue results from incorrect authorization prior to allowing access to functionality. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-29192.
-
CVE-2026-107630
The Email Templates Customizer and Designer for WordPress and WooCommerce plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.5.14 This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to enumerate WooCommerce order IDs via the preview_order parameter and exfiltrate every customer's billing name, address, phone number, and email address. The exploit requires two unauthenticated requests: the first harvests a reusable nonce from the 302 Location header returned by the unguarded admin_init handler, and the second supplies that nonce alongside an arbitrary order ID to the preview endpoint, making full customer PII disclosure trivially achievable without any account or credentials.
-
CVE-2026-91231
Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Adapters). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle SOA Suite. While the vulnerability is in Oracle SOA Suite, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle SOA Suite. CVSS 3.1 Base Score 10.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H).
-
CVE-2026-91216
Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise Oracle SOA Suite. While the vulnerability is in Oracle SOA Suite, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle SOA Suite. CVSS 3.1 Base Score 10.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H).
-
CVE-2026-91221
Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise Oracle SOA Suite. While the vulnerability is in Oracle SOA Suite, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle SOA Suite. CVSS 3.1 Base Score 10.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H).
-
CVE-2026-61737
ng-antd-admin is an Angular and NestJS administration system template. Prior to 22.0, a hardcoded default `JWT` secret permits token forgery when a deployment has not replaced the default secret, without a startup warning. An attacker can bypass authentication and authorization, impersonate any user including administrators, and access protected API endpoints, leading to account takeover, data leakage and unauthorized operations. Version 22.0 rejects the shipped secret in production but permits it with a warning in non-production environments.
-
CVE-2026-13764
The Masterstudy - Education WordPress Theme theme for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.8.151. This is due to missing authorization and nonce validation on the `masterstudy_ms_stm_set_discard_transient` AJAX action. This makes it possible for authenticated attackers, with Subscriber-level access and above, to elevate their privileges to Administrator by setting the `stm_developer_access_token` transient and using the developer access auto-login flow to obtain administrator session cookies.
-
CVE-2026-68507
ideon is a self-hosted visual workspace. Prior to version 0.9.5, ideon's link-preview endpoint requires no authentication at all and forwards any URL a caller supplies straight into a server-side fetch. The app does have a general-purpose SSRF guard (safeFetch/validateSafeUrl in src/app/lib/ssrf.ts), but this route sits behind no login check whatsoever, making it a fully open, anonymous URL-fetch relay - and the guard's IP blocklist itself has a gap that lets it reach the server's own loopback interface via the 0.0.0.0 "any address" bypass, a well-documented SSRF-filter evasion technique on Linux. This issue has been patched in version 0.9.5.
-
CVE-2026-112480
A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A user with screen sharing access may be able to view another user's screen.
-
CVE-2026-127080
OpsTree BuildPiper before 2.7.0 contains an improper authorization vulnerability that allows authenticated deploy users to define arbitrary Kubernetes hostPath volumes without allow-list or policy checks. Attackers can set the host path to / in the Define HostPath Volume configuration to mount the worker node root filesystem read-write, breaking container isolation and enabling node and cluster compromise.
-
CVE-2026-63438
2FAuth is a web app to manage Two-Factor Authentication (2FA) accounts and generate their security codes. Prior to 8.0.0, when AUTHENTICATION_GUARD=reverse-proxy-guard accepts authentication headers from a client that did not pass through a trusted proxy, RemoteUserProvider::retrieveById() creates an account for an unknown REMOTE_USER, promotes the first created account to administrator, and synchronizes the account email from the configured mail header. An unauthenticated remote client can therefore create an administrator on a fresh instance or impersonate and redirect email for a known account, exposing 2FA secrets and administrative functions. This issue is fixed in version 8.0.0.
-
CVE-2026-119215
Authorization Bypass Through User-Controlled Key vulnerability in team-alembic ash_authentication allows a user with an account to install a TOTP secret they control on another user's account, and then sign in as that user or hold their second factor. AshAuthentication.Strategy.Totp.ConfirmSetupChange verified a setup token but did not check that it was issued to the record being confirmed, so an attacker's own pending secret could be confirmed onto another user's record. The TOTP setup changes, ConfirmSetupChange, GeneratePendingSetupChange and GenerateSecretChange, also marked their changesets as AshAuthentication interactions, which the standard AshAuthenticationInteraction policy bypass lets through. A policy limiting setup and confirm_setup to the actor's own record therefore never ran when an application exposed those actions by record key, and a direct setup call on another user's record returned that user's pending secret and setup token. This issue affects ash_authentication: from 5.0.0-rc.0 before 5.0.0-rc.16.
-
CVE-2026-129886
thirdweb Dashboard through commit 940b3745 contains a missing authorization vulnerability in revalidatePathAction and revalidateCacheTagAction server actions in revalidate.ts. Unauthenticated attackers can use action identifiers exposed in the client bundle to send POST requests that purge cached pages and data, forcing repeated regeneration and degrading performance.
-
CVE-2026-105936
The Pulsar Functions worker REST API provides two endpoints that return the catalog of Pulsar IO connectors installed on the functions worker: the worker connectors endpoint (/admin/v2/worker/connectors) and the deprecated functions connectors endpoint (/admin/v2/functions/connectors and /admin/v3/functions/connectors). When authorization is enabled, the worker connectors endpoint requires super-user access. The functions connectors endpoint, served both by the functions worker and by a broker running the functions worker, returns the same catalog without this check. As a result, when authentication and authorization are enabled, any authenticated client can read the connector catalog through the functions connectors endpoint, regardless of the permissions granted to its role and without super-user access. Unauthenticated requests are rejected unless anonymous access is configured with an anonymous user role. The catalog contains the connector type definitions installed in the functions worker's connectors directory: the connector name, its description, and the source, sink and configuration class names. It does not contain configured source or sink instances, their configuration values or credentials, and an installed connector type does not indicate that a connector is configured or running. The impact is limited to disclosure of this metadata, which can include the names and descriptions of custom connectors installed by the operator. The issue does not allow modifying the catalog or managing connectors. Connector definitions that have a source or sink class are also returned by the built-in sources and sinks endpoints to authenticated clients. In fixed versions, the functions connectors endpoint applies the same checks as the worker connectors endpoint, so that it requires super-user access when authorization is enabled. Clients that are not super-users can use the built-in sources and sinks endpoints to list the available connector types. This issue affects Apache Pulsar versions from 2.4.1 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
-
CVE-2026-105931
The Apache Pulsar broker exposes a transaction administration REST API under /admin/v3/transactions. When authentication and authorization are enabled, most of the read endpoints of this API verify only that the request is authenticated and that the broker serves the requested topic or transaction coordinator. They do not check whether the caller is permitted to access the tenant, namespace or topic whose data is returned. The endpoints that modify state, which abort a transaction or scale the transaction coordinators, correctly require super-user access and are not affected. As a result, any authenticated user, including one that has been granted no permissions, can read transaction coordinator and transaction information belonging to other tenants. This includes the list of transaction coordinators with the broker service URLs that serve them, transaction coordinator statistics and internal statistics, transaction metadata including the names of the topics and subscriptions a transaction involves and the principal that opened it, the list of long-running transactions on a transaction coordinator, transaction buffer and pending acknowledgement statistics and internal statistics for any topic and subscription, and whether a given message position of a subscription is currently held in a pending transactional acknowledgement. The disclosure of transaction metadata and statistics can only occur when transaction support is enabled in the broker (transactionCoordinatorEnabled, which is disabled by default). When transaction support is disabled, these endpoints return no transaction data; the only residual effect is that one endpoint's error response can reveal whether a named topic exists in another tenant. The impact is limited to disclosure of transaction-related metadata and statistics across tenant boundaries. The issue does not allow reading message contents, modifying or aborting transactions, or changing any configuration. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately and do not use Pulsar transactions should keep transaction support disabled. Where transactions are required, restricting network access to the broker's admin HTTP endpoints to trusted administrative clients reduces the exposure.
-
CVE-2026-105932
The Apache Pulsar broker admin REST API provides endpoints to read, set and remove the topic-level entry filter policy of a topic. For persistent topics these endpoints check that the caller is authorized for the entry filters topic policy operation. The corresponding endpoints for non-persistent topics (/admin/v2/non-persistent/{tenant}/{namespace}/{topic}/entryFilters) do not perform this authorization check. The only authorization check these endpoints perform is an indirect lookup permission check, made while the topic's partition metadata is retrieved; it is present in all affected versions. As a result, when authentication and authorization are enabled, an authenticated user who has been granted produce or consume permission on a non-persistent topic, or on its namespace, but not permission to manage the topic's policies can read, replace or remove the topic-level entry filter policy of that topic. These operations should be restricted to users with the tenant admin role or the superuser role. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different. The practical impact is limited by two broker configuration requirements, neither of which is met by default: - Entry filters must have been installed by the operator. Entry filter implementations are loaded only at broker startup from the broker's entry filters directory, which is empty by default. A request can only select among entry filters the operator has already deployed; setting any other filter name is rejected. The issue does not allow a caller to install or load entry filter code or to run arbitrary code in the broker. - Topic-level entry filter policies must be allowed to override the broker-level configuration (allowOverrideEntryFilters, which is disabled by default). When this setting is disabled, the topic-level entry filter policy has no effect on message dispatch. In deployments where both conditions are met, an unauthorized user can remove the topic-level entry filter policy of a non-persistent topic, for example one used to restrict which messages are delivered to consumers, or apply a different installed entry filter that withholds messages from subscriptions of that topic. Removing it makes the topic fall back to the namespace-level or broker-level entry filters, which are not removed. A changed policy affects only subscription dispatchers created after the change, for example for new subscriptions or when a subscription is re-created after all of its consumers have disconnected; dispatchers that already exist keep the entry filters they were created with. Because non-persistent topics do not store messages, messages withheld by an entry filter are not delivered. Reading the policy discloses only the names of the configured entry filters. The issue does not allow reading message contents, and entry filters cannot modify message payloads. Persistent topics and namespace-level entry filter policies are not affected. Apache Pulsar versions before 3.3.0 are not affected, because in those versions the entry filters topic policy check is made in code shared by the persistent and non-persistent endpoints. This issue affects Apache Pulsar versions from 3.3.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 3.3.x and 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately and have deployed entry filters should keep allowOverrideEntryFilters at its default value of false, so that topic-level entry filter policies do not affect message dispatch.
-
CVE-2026-105671
The login flow in Zenitel Connect before 1.11.0 returns different error responses depending on whether a submitted username exists, which allows remote attackers to enumerate valid user accounts via crafted login requests.
-
CVE-2026-61418
Dell SmartFabric OS10 Software, versions prior to 10.6.0.10, contains an Incorrect Authorization vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution.
-
CVE-2026-107616
The Amelia plugin for WordPress is vulnerable to unauthorized access of attendee data due to a missing authorization check on the GetEventAttendeesCommandHandler::handle() function in versions up to, and including, 9.9.1. The handler only enforces the broad `amelia_read_events` capability — which the plugin's own `wpamelia-customer` role possesses — and does not verify that the authenticated user is an organizer/provider of the event referenced by the client-supplied `id` query parameter. This makes it possible for authenticated attackers, with wpamelia-customer-level access and above, to export the full CSV of attendee personally identifiable information (first/last name, email, phone, date of birth, gender, private notes, payment amounts/methods, WooCommerce order IDs, custom-field values, and uploaded-file URLs) for any Amelia event on the site by directly invoking the `/report/event/attendees` endpoint with an arbitrary event ID.
-
CVE-2026-17240
IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote attacker to bypass security restrictions due to improper authentication. Authentication checks are not applied consistently, which could allow protected resources to be reached without valid credentials.
-
CVE-2026-16920
IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to bypass security restrictions due to a confused deputy vulnerability.
-
CVE-2026-103090
Missing Authentication for Critical Function (CWE-306) and Insufficiently Protected Credentials (CWE-522) in the control plane enrollment status handler (HandleEnrollStatus at GET /enroll/status in internal/controlplane/server.go) in Google OSS Agent Mesh (SAM) versions 0.1.0-alpha.1 through 0.1.0-alpha.8 allow an unauthenticated remote attacker to retrieve an approved bootstrap-enrolled peer's signed Biscuit identity token by supplying a peer_id obtainable from the unauthenticated GET /info endpoint. A related flaw in POST /enroll allowed any bootstrap-token holder to re-fetch another peer's credential. An attacker can replay the disclosed Biscuit token as a bearer credential on /policies to read mesh authorization policies and on /routers/lease to overwrite advertised router multiaddrs. Users should upgrade to version 0.1.0-alpha.9 or later, which requires cryptographic proof of possession of the enrollment private key on credential-releasing endpoints, enforces rate limiting, and validates router lease addresses.
-
CVE-2026-82894
Improper Authorization in ContentWorker in Apache OFBiz 24.09 before 24.09.08 on all platforms allows a remote unauthenticated attacker to trigger arbitrary OFBiz service invocation with attacker-controlled parameters, resulting in arbitrary file write, arbitrary file deletion, and server-side request forgery, by requesting the public showHelpPublic view against a Content row whose serviceName field an account holding only CONTENTMGR_CREATE or CONTENTMGR_UPDATE has set to an attacker-chosen service, causing ContentWorker.renderContentAsText to resolve the service to invoke from that persisted, client-writable field and build its parameters directly from the live HTTP request map with no allow-list, no ownership check, and no requirement that the caller be authenticated. Users are recommended to upgrade to version 24.09.08, which fixes this issue.
-
CVE-2026-121609
A vulnerability was identified in Qihoo 360 Whole Home Router M5 4.0.17.1566. This issue affects the function Home of the file /etc/init.d/mpt of the component Boot Script. The manipulation leads to hard-coded credentials. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-17403
IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote attacker to gain full administrative control due to the use of hard-coded credentials.
-
CVE-2026-115829
In Secret Server on-prem versions earlier than 12.3.1, a user could cause a two-factor pin code to be generated for any account without prior authentication, then bypass the initial login step and authenticate using the second factor alone.
-
CVE-2026-115072
Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Installation and Configuration). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Infrastructure Technology. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-114949
Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Replication). Supported versions that are affected are MySQL Server: 8.4.0-8.4.13, 9.7.0-9.7.4, 26.10; MySQL Cluster: 8.0.0-8.0.50, 8.4.0-8.4.13, 9.7.0-9.7.4 and 26.10. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in takeover of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-114950
Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are MySQL Server: 8.4.0-8.4.13, 9.7.0-9.7.4, 26.10; MySQL Cluster: 8.0.0-8.0.50, 8.4.0-8.4.13, 9.7.0-9.7.4 and 26.10. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in takeover of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-114951
Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Logging). Supported versions that are affected are MySQL Server: 8.4.0-8.4.13, 9.7.0-9.7.4, 26.10; MySQL Cluster: 8.0.0-8.0.50, 8.4.0-8.4.13, 9.7.0-9.7.4 and 26.10. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in takeover of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-114927
Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-114902
Vulnerability in the Oracle Product Hub product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Product Hub. Successful attacks of this vulnerability can result in takeover of Oracle Product Hub. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-114883
Vulnerability in the Oracle Teleservice product of Oracle E-Business Suite (component: Service Request Form). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Teleservice. Successful attacks of this vulnerability can result in takeover of Oracle Teleservice. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-114884
Vulnerability in the Oracle Lease and Finance Management product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Lease and Finance Management. Successful attacks of this vulnerability can result in takeover of Oracle Lease and Finance Management. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-101838
Vulnerability in the Oracle Contracts product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Contracts. Successful attacks of this vulnerability can result in takeover of Oracle Contracts. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-101839
Vulnerability in the Oracle Contracts product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Contracts. Successful attacks of this vulnerability can result in takeover of Oracle Contracts. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
-
CVE-2026-94290
SUSE Rancher Fleet clusters reference a kubeconfig secret that the controller uses to install and manage a Fleet agent on the target cluster. The controller did not sufficiently restrict which kubeconfig secrets a Fleet Cluster object was allowed to reference. As a result, a Fleet cluster defined in a namespace an ordinary user controls could be associated with administrative credentials for the management cluster itself, causing the controller to manage the management cluster on that user's behalf and to run that user's Fleet content there with elevated privileges. This affects SUSE Rancher Fleet 0.16.0 up to 0.16.3, 0.15.0 up to 0.15.8, 0.14.0 up to 0.14.12, 0.13.0 up to 0.13.17 and possible older versions.
-
CVE-2026-119654
DataCap through 2025.1.1 contains a missing authorization vulnerability that allows any authenticated user to escalate privileges by calling administrative role and menu management APIs. Attackers, including self-registered accounts, can send PUT requests to /api/v1/user/allocationRole to assign themselves the administrator role and gain full control of the instance.
-
CVE-2026-107015
Insecure permissions in Simple Contacts Pro versionCode 107 allow unauthorized attackers to write and read notes in another user's' note database.
-
CVE-2026-116634
OmniRoute 3.8.50 before 3.8.52 contains a missing authentication vulnerability that allows unauthenticated attackers to issue sync tokens via POST /api/sync/tokens when requireLogin is disabled. Attackers can use the issued token against GET /api/sync/bundle to retrieve decrypted provider credentials and plaintext API keys, with tokens persisting after login is re-enabled.
-
CVE-2026-114400
Trudesk through 1.2.11 contains a missing authentication vulnerability that allows unauthenticated attackers to download private ticket attachments under /uploads. Because express.static serves the public/ directory before the hasAuth-guarded /uploads mount, attackers who know or guess a ticket ObjectId and filename can retrieve confidential attachments.
-
CVE-2026-126184
A authentication bypass by spoofing vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.0 through 7.6.7, FortiAnalyzer 7.4.0 through 7.4.11, FortiAnalyzer 7.2.0 through 7.2.12, FortiAnalyzer Cloud 8.0.1, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiAnalyzer Cloud 7.2.1 through 7.2.12, FortiAnalyzer-BigData 7.6.0 through 7.6.2, FortiAnalyzer-BigData 7.4.0 through 7.4.6, FortiAnalyzer-BigData 7.2.0 through 7.2.12, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager 7.2.0 through 7.2.12, FortiManager Cloud 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11, FortiManager Cloud 7.2.1 through 7.2.12 may allow an attacker to disrupt the HA state.
-
CVE-2026-124738
A flaw was found in BusyBox. When the HTTP daemon (httpd) has pre-compressed file support enabled, authentication checks are evaluated only against the requested URL path rather than the pre-compressed file being served. A remote attacker can exploit this flaw by requesting an uncompressed file path while specifying gzip encoding, bypassing password rules configured specifically for the compressed file. This vulnerability can lead to unauthorized information disclosure of sensitive files.
-
CVE-2026-114230
When dispatching SASL frames to authenticate the peer, Proton will also dispatch AMQP frames if they claim to be SASL frames. This allows authentication bypass. However there will be no user name set so the effects depend on how the application deals with this condition - which otherwise means that authentication has not completed yet. This issue affects Apache Qpid Proton C: through 0.40.0. Users are recommended to upgrade to version 0.41.1, which fixes the issue.
-
CVE-2026-125164
The file dump controller (eID=dumpFile) delivers files, file references and processed files identified by their uid, protected by a token. The token only covered the uid value, but not the type of the requested resource. A valid token issued for a file could therefore be reused to request a file reference or a processed file with the same uid. As a result, unauthenticated visitors could download files, for example from non-public storages, for which no token had been issued.
A list of CVEs whose flaw type is auth & access, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.