Auth & access CVEs.
Published CVEs classified as auth & access, ranked by exploit odds.
-
CVE-2020-8863
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-9470.
-
CVE-2016-10176
The NETGEAR WNR2000v5 router allows an administrator to perform sensitive actions by invoking the apply.cgi URL on the web server of the device. This special URL is handled by the embedded web server (uhttpd) and processed accordingly. The web server also contains another URL, apply_noauth.cgi, that allows an unauthenticated user to perform sensitive actions on the device. This functionality can be exploited to change the router settings (such as the answers to the password-recovery questions) and achieve remote code execution.
-
CVE-2018-12710
An issue was discovered on D-Link DIR-601 2.02NA devices. Being local to the network and having only "User" account (which is a low privilege account) access, an attacker can intercept the response from a POST request to obtain "Admin" rights due to the admin password being displayed in XML.
-
CVE-2019-1937
A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to acquire a valid session token with administrator privileges, bypassing user authentication. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to use the acquired session token to gain full administrator access to the affected device.
-
CVE-2026-76460
A vulnerability in an API of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass authentication. This vulnerability is due to insufficient authentication control on an API endpoint. An attacker could exploit this vulnerability by sending a crafted request to an affected API endpoint. A successful exploit could allow the attacker to gain unauthorized access to the affected device by bypassing the web-based management interface.
-
CVE-2020-3247
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2020-3248
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2020-3239
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2016-1909
Fortinet FortiAnalyzer before 5.0.12 and 5.2.x before 5.2.5; FortiSwitch 3.3.x before 3.3.3; FortiCache 3.0.x before 3.0.8; and FortiOS 4.1.x before 4.1.11, 4.2.x before 4.2.16, 4.3.x before 4.3.17 and 5.0.x before 5.0.8 have a hardcoded passphrase for the Fortimanager_Access account, which allows remote attackers to obtain administrative access via an SSH session.
-
CVE-2018-11714
An issue was discovered on TP-Link TL-WR840N v5 00000005 0.9.1 3.16 v0001.0 Build 170608 Rel.58696n and TL-WR841N v13 00000013 0.9.1 4.16 v0001.0 Build 170622 Rel.64334n devices. This issue is caused by improper session handling on the /cgi/ folder or a /cgi file. If an attacker sends a header of "Referer: http://192.168.0.1/mainFrame.htm" then no authentication is required for any action.
-
CVE-2023-5074
Use of a static key to protect a JWT token used in user authentication can allow an for an authentication bypass in D-Link D-View 8 v2.0.1.28
-
CVE-2008-0960
SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.
-
CVE-2001-0537
HTTP server for Cisco IOS 11.3 to 12.2 allows attackers to bypass authentication and execute arbitrary commands, when local authorization is being used, by specifying a high access level in the URL.
-
CVE-2023-28461
Array Networks Array AG Series and vxAG (9.4.0.481 and earlier) allow remote code execution. An attacker can browse the filesystem on the SSL VPN gateway using a flags attribute in an HTTP header without authentication. The product could then be exploited through a vulnerable URL. The 2023-03-09 vendor advisory stated "a new Array AG release with the fix will be available soon."
-
CVE-2019-13101
An issue was discovered on D-Link DIR-600M 3.02, 3.03, 3.04, and 3.06 devices. wan.htm can be accessed directly without authentication, which can lead to disclosure of information about the WAN, and can also be leveraged by an attacker to modify the data fields of the page.
-
CVE-2023-28126
An authentication bypass vulnerability exists in Avalanche versions 6.3.x and below that could allow an attacker to gain access by exploiting the SetUser method or can exploit the Race Condition in the authentication message.
-
CVE-2017-14147
An issue was discovered on FiberHome User End Routers Bearing Model Number AN1020-25 which could allow an attacker to easily restore a router to its factory settings by simply browsing to the link http://[Default-Router-IP]/restoreinfo.cgi & execute it. Due to improper authentication on this page, the software accepts the request hence allowing attacker to reset the router to its default configurations which later could allow attacker to login to router by using default username/password.
-
CVE-2022-44574
An improper authentication vulnerability exists in Avalanche version 6.3.x and below allows unauthenticated attacker to modify properties on specific port.
-
CVE-2012-1493
F5 BIG-IP appliances 9.x before 9.4.8-HF5, 10.x before 10.2.4, 11.0.x before 11.0.0-HF2, and 11.1.x before 11.1.0-HF3, and Enterprise Manager before 2.1.0-HF2, 2.2.x before 2.2.0-HF1, and 2.3.x before 2.3.0-HF3, use a single SSH private key across different customers' installations and do not properly restrict access to this key, which makes it easier for remote attackers to perform SSH logins via the PubkeyAuthentication option.
-
CVE-2017-3191
D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 are vulnerable to authentication bypass of the remote login page. A remote attacker that can access the remote management login page can manipulate the POST request in such a manner as to access some administrator-only pages such as tools_admin.asp without credentials.
-
CVE-2020-3251
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2015-7755
Juniper ScreenOS 6.2.0r15 through 6.2.0r18, 6.3.0r12 before 6.3.0r12b, 6.3.0r13 before 6.3.0r13b, 6.3.0r14 before 6.3.0r14b, 6.3.0r15 before 6.3.0r15b, 6.3.0r16 before 6.3.0r16b, 6.3.0r17 before 6.3.0r17b, 6.3.0r18 before 6.3.0r18b, 6.3.0r19 before 6.3.0r19b, and 6.3.0r20 before 6.3.0r21 allows remote attackers to obtain administrative access by entering an unspecified password during a (1) SSH or (2) TELNET session.
-
CVE-2020-3250
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2014-8424
ARRIS VAP2500 before FW08.41 does not properly validate passwords, which allows remote attackers to bypass authentication.
-
CVE-2023-4415
A vulnerability was found in Ruijie RG-EW1200G 07161417 r483. It has been rated as critical. Affected by this issue is some unknown functionality of the file /api/sys/login. The manipulation leads to improper authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-237518 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2019-17506
There are some web interfaces without authentication requirements on D-Link DIR-868L B1-2.03 and DIR-817LW A1-1.04 routers. An attacker can get the router's username and password (and other information) via a DEVICE.ACCOUNT value for SERVICES in conjunction with AUTHORIZED_GROUP=1%0a to getcfg.php. This could be used to control the router remotely.
-
CVE-2023-32169
D-Link D-View Use of Hard-coded Cryptographic Key Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of D-Link D-View. Authentication is not required to exploit this vulnerability. The specific flaw exists within the TokenUtils class. The issue results from a hard-coded cryptographic key. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19659.
-
CVE-2021-46442
In the "webupg" binary of D-Link DIR-825 G1, attackers can bypass authentication through parameters "autoupgrade.asp", and perform functions such as downloading configuration files and updating firmware without authorization.
-
CVE-2019-16667
diag_command.php in pfSense 2.4.4-p3 allows CSRF via the txtCommand or txtRecallBuffer field, as demonstrated by executing OS commands. This occurs because csrf_callback() produces a "CSRF token expired" error and a Try Again button when a CSRF token is missing.
-
CVE-2023-4169
A vulnerability was found in Ruijie RG-EW1200G 1.0(1)B1P5. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /api/sys/set_passwd of the component Administrator Password Handler. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-236185 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-10523
An Authentication Bypass vulnerability (CWE-288) in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauthenticated attacker to create arbitrary administrative accounts and obtain full administrative access
-
CVE-2019-6441
An issue was discovered on Shenzhen Coship RT3050 4.0.0.40, RT3052 4.0.0.48, RT7620 10.0.0.49, WM3300 5.0.0.54, and WM3300 5.0.0.55 devices. The password reset functionality of the router doesn't have backend validation for the current password and doesn't require any type of authentication. By making a POST request to the apply.cgi file of the router, the attacker can change the admin username and password of the router.
-
CVE-2024-32238
H3C ER8300G2-X is vulnerable to Incorrect Access Control. The password for the router's management system can be accessed via the management system page login interface.
-
CVE-2017-5254
In version 3.5 and prior of Cambium Networks ePMP firmware, the non-administrative users 'installer' and 'home' have the capability of changing passwords for other accounts, including admin, after disabling a client-side protection mechanism.
-
CVE-2021-40856
Auerswald COMfortel 1400 IP and 2600 IP before 2.8G devices allow Authentication Bypass via the /about/../ substring.
-
CVE-2018-15439
A vulnerability in the Cisco Small Business Switches software could allow an unauthenticated, remote attacker to bypass the user authentication mechanism of an affected device. The vulnerability exists because under specific circumstances, the affected software enables a privileged user account without notifying administrators of the system. An attacker could exploit this vulnerability by using this account to log in to an affected device and execute commands with full admin rights. Cisco has not released software updates that address this vulnerability. This advisory will be updated with fixed software information once fixed software becomes available. There is a workaround to address this vulnerability.
-
CVE-2023-50919
An issue was discovered on GL.iNet devices before version 4.5.0. There is an NGINX authentication bypass via Lua string pattern matching. This affects A1300 4.4.6, AX1800 4.4.6, AXT1800 4.4.6, MT3000 4.4.6, MT2500 4.4.6, MT6000 4.5.0, MT1300 4.3.7, MT300N-V2 4.3.7, AR750S 4.3.7, AR750 4.3.7, AR300M 4.3.7, and B1300 4.3.7.
-
CVE-2019-16313
ifw8 Router ROM v4.31 allows credential disclosure by reading the action/usermanager.htm HTML source code.
-
CVE-2020-26879
Ruckus vRioT through 1.5.1.0.21 has an API backdoor that is hardcoded into validate_token.py. An unauthenticated attacker can interact with the service API by using a backdoor value as the Authorization header.
-
CVE-2019-12583
Missing Access Control in the "Free Time" component of several Zyxel UAG, USG, and ZyWall devices allows a remote attacker to generate guest accounts by directly accessing the account generator. This can lead to unauthorised network access or Denial of Service.
-
CVE-2024-3080
Certain ASUS router models have authentication bypass vulnerability, allowing unauthenticated remote attackers to log in the device.
-
CVE-2014-100005
Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Bx) with firmware before 2.17b02 allow remote attackers to hijack the authentication of administrators for requests that (1) create an administrator account or (2) enable remote management via a crafted configuration module to hedwig.cgi, (3) activate new configuration settings via a SETCFG,SAVE,ACTIVATE action to pigwidgeon.cgi, or (4) send a ping via a ping action to diagnostic.php.
-
CVE-2014-6436
Aztech ADSL DSL5018EN (1T1R), DSL705E, and DSL705EU devices improperly manage sessions, which allows remote attackers to bypass authentication in opportunistic circumstances and execute arbitrary commands with administrator privileges by leveraging an existing web portal login.
-
CVE-2025-32815
An issue was discovered in Infoblox NETMRI before 7.6.1. Authentication Bypass via a Hardcoded credential can occur.
-
CVE-2021-20150
Trendnet AC2600 TEW-827DRU version 2.08B01 improperly discloses information via redirection from the setup wizard. Authentication can be bypassed and a user may view information as Admin by manually browsing to the setup wizard and forcing it to redirect to the desired page.
-
CVE-2022-28955
An access control issue in D-Link DIR816L_FW206b01 allows unauthenticated attackers to access folders folder_view.php and category_view.php.
-
CVE-2017-3192
D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 do not sufficiently protect administrator credentials. The tools_admin.asp page discloses the administrator password in base64 encoding in the returned web page. A remote attacker with access to this page (potentially through a authentication bypass such as CVE-2017-3191) may obtain administrator credentials for the device.
-
CVE-2026-76504
A vulnerability in the API session-based authentication management of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to access an affected system with privileges of the admin user. This vulnerability is due to improper handling of URI encoding in an HTTP request, which allows the request to bypass an authentication rule that is intended to restrict access to a specific API endpoint. An attacker could exploit this vulnerability by sending a crafted HTTP request to the API of the affected system. A successful exploit could allow the attacker to bypass authentication and gain access to the API as the admin user.
-
CVE-2025-20282
A vulnerability in an internal API of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to upload arbitrary files to an affected device and then execute those files on the underlying operating system as root. This vulnerability is due a lack of file validation checks that would prevent uploaded files from being placed in privileged directories on an affected system. An attacker could exploit this vulnerability by uploading a crafted file to the affected device. A successful exploit could allow the attacker to store malicious files on the affected system and then execute arbitrary code or obtain root privileges on the system.
-
CVE-2020-3240
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A list of CVEs whose flaw type is auth & access, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.