Auth & access CVEs.
Published CVEs classified as auth & access, ranked by exploit odds.
-
CVE-2026-112164
The LaserGest mobile application encrypts stored assistance portal credentials with a hardcoded AES key and IV, allowing an attacker with access to the application package to recover them in cleartext.
-
CVE-2026-103906
Use of hard-coded MQTT credentials in the AM CLUB mobile application allows an authenticated attacker to connect to the MQTT broker and access data or perform actions across tenant boundaries.
-
CVE-2026-122116
Certain Yealink terminal devices before 2026-04-21 contain an improper access control vulnerability in the Wi-Fi 802.1X PEAP network configuration function. This flaw exposes deployed 802.1X network access authentication credentials to unauthorized users. The latest Yealink firmware has addressed this vulnerability by restricting 802.1X configuration modification privileges to administrator accounts only by default.
-
CVE-2026-114357
Missing authentication for a critical function in the Android Debug Bridge daemon (adbd) in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 allows an attacker to obtain an unauthenticated shell (uid 2000), a foothold for privilege escalation to root. The device ships with ro.adb.secure=0 (no host key authorization) and USB ADB enabled by default; ADB over TCP is not enabled by default but, once enabled (e.g. via the shipped /system/bin/adbd_tcp.sh or 'setprop persist.adb.tcp.port 5555'), the same unauthenticated shell is reachable over the network (CVSS 4.0 base 9.3).
-
CVE-2026-113965
This issue was addressed with improved checks. This issue is fixed in HomeView Software Version 27.2, iOS 18.7.12 and iPadOS 18.7.12, iOS 26.7.3 and iPadOS 26.7.3, iOS 27.2.1 and iPadOS 27.2.1, macOS Golden Gate 27.2.1, macOS Sequoia 15.8.3, macOS Tahoe 26.7.3, tvOS 27.2.1, visionOS 27.2.1, watchOS 26.6.1, watchOS 27.2.1. A malicious Bluetooth device may be able to establish a pairing without user interaction.
-
CVE-2026-89017
Skyline DataMiner BrokerGateway contains an embedded API key vulnerability that allows unauthenticated attackers to retrieve the installation-specific BrokerGateway key even while pairing mode is disabled. Attackers can use the retrieved key to obtain the unrestricted DataMinerUser.creds NATS credential and gain trusted message-bus access via TCP port 4222 without any prior DataMiner credentials. Fixed in DataMiner 10.6.9 CU1, 10.6.0 CU7, 10.5.0 CU19, and 10.4.0 CU22.
-
CVE-2026-121144
This vulnerability exists in the iRA 2.0 and iRA.ev mobile applications due to presence of hardcoded service account credentials, API Keys and authorization tokens within the application package. An unauthenticated remote attacker could exploit this vulnerability by downloading application package and extracting embedded sensitive information. Successful exploitation of this vulnerability could allow the attacker to gain unauthorized access to associated backend services and potentially access sensitive information or perform unauthorized operations on the targeted system.
-
CVE-2026-49393
OpenHuman is an open-source agent harness available as a desktop application and Rust library. Before 0.56.0, the core server protects HTTP POST requests to /rpc with bearer middleware but exposes Socket.IO rpc:request and chat:start handlers without equivalent transport or handler-level authentication. A local unauthenticated client can connect to the Socket.IO namespace and dispatch requests through the same protected controller path that rejects a missing bearer on /rpc. Depending on the selected method, the attacker can read configuration or health data, start agent flows, interact with integrated account APIs, alter local data, or stop and restart services. This issue is fixed in version 0.56.0.
-
CVE-2026-111489
A static credential embedded in the mobile app has been reported to return the 'autorizado' token on the MatchPoint platform. The report states that this token grants unauthenticated access to API services.
-
CVE-2026-49407
OpenHuman is an open-source agent harness available as a desktop application and Rust library. Before version 0.57.44, its local /ws/dictation WebSocket endpoint lacks client authentication and browser-origin validation. An unauthenticated client, including a malicious web page able to reach the endpoint, can submit audio and trigger resource-intensive speech-to-text processing. Earlier affected versions also accumulate audio in an unbounded buffer, allowing continuous streaming to exhaust process memory. These conditions can degrade performance, exhaust resources, or crash the application. This issue is fixed in version 0.57.44.
-
CVE-2026-119736
Attendo (formerly Petpooja Payroll) Admin Android application version 3.0.13 and earlier contains a hard-coded credentials vulnerability that allows attackers to extract production MQTT broker credentials by decompiling the APK's bundled Flutter configuration assets such as production.json and device-command configuration files. Attackers can use the recovered credentials to authenticate to the production MQTT broker over TCP 1883, access messaging topics containing employee attendance records, personal identifiers, Base64-encoded photographs, device telemetry, and authentication material, and publish messages to those topics, resulting in exposure of sensitive data and potential unauthorized message injection.
-
CVE-2026-71450
Authentication bypass using an alternate path or channel vulnerability in Johnson Controls EasyIO Neo EC and CW Edge Controller allows Authentication Bypass. This issue affects EasyIO Neo EC and CW Edge Controller: from EC 3.3b62 through EC 3.3b63 and from CW 3.3b24 through CW 3.3b25.
-
CVE-2026-8332
A hard-coded root password in Microchip TimePictra platform installation files could allow an attacker with access to those files to obtain privileged credentials
-
CVE-2026-113374
Sonatype Nexus Repository 3 does not require realm administration permission when a user creates a Rut Auth capability. A user who holds only the capability creation permission (nexus:capabilities:create) can create this capability, which turns on header-based authentication for the instance. A remote client can then authenticate as an existing user, including an administrator, without credentials.
-
CVE-2026-118601
Alpine iLX-F511 SSH Hard-Coded Credentials Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine iLX-F511 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SSH service. The issue results from the use of hard-coded credentials. An attacker can leverage this vulnerability to execute code in the context of the telechips user. Was ZDI-CAN-29013.
-
CVE-2026-105461
Missing check for ORDERMGR_UPDATE in ordermgr allows user with only ORDERMGR_VIEW permission to update orders. Affected versions before : 24.09.08 Users are recommended to upgrade to version 24.09.08 which fixes this issue.
-
CVE-2026-54374
VitaFit Android application (com.vt.vitafit) before 2.8.1.0 contains a hardcoded credentials vulnerability that allows attackers to extract confidential third-party integration secrets by decompiling the APK. Attackers can retrieve embedded WeChat, Tencent QQ, and Fitbit credentials from the decompiled application to abuse the active third-party application registrations.
-
CVE-2026-62662
Pocket ID is an OIDC provider that allows users to authenticate with their passkeys to services. From 1.11.0 until 2.10.0, createTokenFromClientCredentials in backend/internal/service/oidc_service.go accepts the client-controlled resource parameter and embeds it directly in the access token aud claim without validating that the audience is registered or that the requesting client may access it. Any authenticated OIDC client can therefore obtain a Pocket ID-signed token naming another client or an arbitrary audience. The /api/oidc/introspect endpoint cannot distinguish the unauthorized token because it treats a token as active when the introspecting client's identifier matches the attacker-selected audience. In deployments where resource servers trust Pocket ID access tokens for service-to-service authorization, this bypasses audience-based access controls and can permit unauthorized data access or actions; deployments that do not use these tokens for resource-server authorization have no immediate exploitable impact. This issue is fixed in version 2.10.0.
-
CVE-2026-19741
Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning. The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset. The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination. The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit.
-
CVE-2026-77058
boneIO Black is vulnerable to Cross-Site Request Forgery (CSRF) on all state-changing API endpoints because it lacks CSRF tokens and does not validate Origin or Referer headers. A remote attacker can craft a malicious webpage that, when visited by a user on the internal network, sends cross-origin requests to the device. This allows the attacker to reboot the controller, toggle relay circuits, control gates and blinds, or shut down the device, causing loss of integrity and availability. Critically, due to CVE-2026-77053 (authentication disabled by default), any user on the same internal network can trigger attacker-controlled actions by visiting the malicious website. This issue was fixed in version 1.6.0.
-
CVE-2026-106018
Authentication bypass using an alternate path or channel vulnerability in Johnson Controls EasyIO FW allows Authentication Bypass. This issue affects EasyIO FW: through 3.0b25.
-
CVE-2026-77053
boneIO Black firmware ships with authentication disabled by default. Its management web API listens on all network interfaces and exposes all endpoints without requiring credentials. An unauthenticated remote attacker can fully control the device, causing denial of service, modifying configuration, and operating connected physical circuits. This issue was fixed in version 1.6.0: a device without an administrator account refuses API requests until the owner creates one in the first-run wizard, and every API route is restricted to an authenticated role. Versions before 1.2.0 are based on Debian 10, are no longer supported and cannot be upgraded in place; affected devices should be re-flashed with the 1.6.0 system image.
-
CVE-2026-62977
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, the BACnet FILE object implementation allows remote WriteProperty(PROP_FILE_SIZE) requests to change the size of a stream-access FILE object without checking whether that FILE is marked Read_Only. When the FILE backend is RAMFS, enlarging the file only performs realloc() and updates the stored size; the newly exposed tail region is not initialized before later reads. As a result, a remote client can enlarge a read-only RAMFS-backed stream-access FILE and then immediately retrieve the newly exposed region with AtomicReadFile(stream-access). Depending on the allocator and build configuration, the returned data may contain sanitizer fill bytes, stale heap contents, or other unintended process memory. Shrinking the file through the same path can also remotely truncate content that was intended to be read-only. This issue has been patched in versions 1.5.1 and 1.6.0.
-
CVE-2026-118790
Multiple hardcoded credentials are embedded within product components and administrative functionalities. These credentials may enable unauthorized access to privileged accounts, services, or application features across affected deployments.
-
CVE-2026-20241
A vulnerability in the authorization mechanism of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an unauthenticated, remote attacker to obtain an endpoint identity certificate. This vulnerability is due to improper authorization checks. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to bypass authorization to obtain an endpoint certificate.
-
CVE-2026-112345
TTLock Android application before v9.8.260718 and associated smart-lock firmware contain a hardcoded static AES key vulnerability that allows an attacker within Bluetooth range to decrypt the per-pairing session key transmitted during BLE pairing. Attackers can observe the pairing exchange, recover the persistent session key using the embedded defaultKey, and forge authenticated BLE requests to unlock the device, add fingerprints or access codes, and perform administrative actions without authentication or user interaction.
-
CVE-2026-105821
The Tapo Cloud MQTT broker contains a broken access control vulnerability in a proxy topic used by authenticated Tapo devices to request service tokens. The broker does not verify that the device ID supplied in a proxy request belongs to the authenticated device. An attacker who owns a Tapo device and knows another device's ID may obtain a device token scoped to the target device and use it to upload attacker-controlled content to the target user's Tapo Cloud storage. The content may then be presented in the Tapo app as a legitimate event. Successful exploitation may allow an attacker to upload attacker-controlled content that is presented to a target user as a legitimate Tapo event, retrieve internal service information through crafted proxy requests, or abuse Tapo Cloud outbound request capability in activity that could affect service availability.
-
CVE-2026-54383
VitaFit cloud API before 2026-10-30 contained an excessive data exposure vulnerability that allows any authenticated user to query the GET /front/relation/search/ endpoint and retrieve PII and health-related profile information for user records. Attackers can enumerate the user directory using overlapping alphanumeric search terms to harvest identifiers, emails, birthdays, gender, height, weight goals, phone numbers, and Firebase UIDs.
-
CVE-2026-54378
VitaFit cloud API before 2026-10-30 contained a broken access control vulnerability that allows any authenticated user to obtain temporary AWS credentials by calling the POST /front/user/s3/token/ endpoint. Attackers can use these improperly scoped credentials to list the shared storage bucket and read or overwrite other users' stored files, enabling unauthorized cross-user data access and manipulation.
-
CVE-2026-115996
A vulnerability was detected in Unitree Robotics Unitree Go2 up to 1.1.13/1.1.14.1/1.1.15.1. This affects the function WebSocketClient.connect of the file websocket.py of the component chat_go. Performing a manipulation results in improper certificate validation. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitability is reported as difficult. The vendor confirmed early: "These issues were previously submitted by the researcher through our Security Response Center platform and are tracked internally as follows: Submission 990504 corresponds to our internal ticket #616 (Go2 chat_go WSS client disabled TLS server certificate validation, CWE-295)."
-
CVE-2026-91276
Vulnerability in the JD Edwards EnterpriseOne Orchestrator product of Oracle JD Edwards (component: E1 IOT Orchestrator Security). Supported versions that are affected are 9.2.0.0-9.2.26.5. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise JD Edwards EnterpriseOne Orchestrator. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all JD Edwards EnterpriseOne Orchestrator accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N).
-
CVE-2026-123998
Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains an authentication bypass vulnerability in its remote-control MQTT broker on TCP port 36669, which accepts publicly documented default credentials and an ineffective 4-digit pairing PIN with no rate limiting or lockout, allowing a brute force of the entire code space in about five seconds, while some actions require no pairing at all. A LAN-adjacent attacker can exploit this to inject key events, change volume, switch input sources, enumerate inputs, launch arbitrary installed applications, and monitor pairing activity, posing a significant risk in hotel deployments where untrusted LAN access is common.
-
CVE-2026-102166
Arista C-260 and C-250 access points ship with fleet-wide static cryptographic keys used for firmware image verification and SSLP authentication. An attacker who is able to access these keys would be able to create modified firmware that will pass verification checks. This vulnerability is specific to the C-260 and C-250 models; other access point models enforce digitally signed upgrade images with secure boot and are not affected by this issue.
-
CVE-2026-116017
Xiaozhi-esp32-server before 0.9.8 contains an insecure direct object reference vulnerability in the manager-api DeviceController.getAddressBook handler that allows authenticated users to read other users' device address books. Attackers with a normal or self-registered account can request /device/address-book/{macAddress} with another user's device MAC to obtain contact MACs, aliases, call permissions, and owner user IDs.
-
CVE-2026-115803
A flaw has been found in Scada-LTS 2.8.0. Affected by this vulnerability is the function HttpServletRequest.getParameter of the file AmChartValuesAPI.java of the component AmCharts Data API. Executing a manipulation of the argument ids can lead to authorization bypass. The attack can be executed remotely. The exploit has been published and may be used. The vendor announces: "At this moment we are working on new release with security enhancements which will be introduced to the community soon."
-
CVE-2026-82033
DeepSeek Harness prior to 0.1.2-alpha.2, and specifically commit 3e24087, contains a missing authentication vulnerability in its web profile HTTP and WebSocket RPC control plane, allowing any local process, including those running as a different OS user, to reach unauthenticated session methods such as session.create and session.prompt. Attackers can invoke session.prompt to trigger the agent's bash and filesystem tools, achieve arbitrary command execution as the victim user using their configured model credentials, intercept live session traffic and logs over the event mux stream, and bypass human tool-approval checks via POST /api/respond by matching only rpcId, approvalId, and sessionId values broadcast over the ungated stream.
-
CVE-2026-8372
A vulnerability that could allow an attacker to gain unauthorized access.
-
CVE-2026-53986
Girafit camera app (Android and iOS) version 1.9.1 and earlier, and Girafit camera devices, contain a hardcoded credentials vulnerability that allows attackers to obtain the shared TURN relay username by decompiling the app or intercepting unencrypted network traffic during live view registration. Attackers can extract the static TURN username and session token, which are identical across all installs and not tied to any user or device, potentially enabling tracking, impersonation, or further exploitation if combined with the TURN relay password.
-
CVE-2026-128907
Missing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI's proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.
-
CVE-2026-54146
OpenHuman is an open-source agent harness available as a desktop application and Rust library. From 0.53.15 before 0.57.5 on macOS, core_process.rs in the Tauri desktop process publishes the per-launch OPENHUMAN_CORE_TOKEN bearer credential in its process environment even though the core now runs as an in-process task. Another process running as the same user can read that environment through the macOS KERN_PROCARGS2 process-inspection interface, recover the token together with the local host and port, and authenticate to the core JSON-RPC service with the authority of the desktop frontend. The attacker can read agent memory and integrated-account data, invoke privileged actions, change configuration, and stop or disrupt services without root access, developer mode, or changes to System Integrity Protection. This issue affects Intel and Apple Silicon macOS systems. This issue is fixed in version 0.57.5.
-
CVE-2026-113373
Sonatype Nexus Repository 3 Pro does not check the local account status when a user signs in through a configured SAML or OAuth2/OpenID Connect identity provider. A user whose account was disabled or locked by an administrator in Nexus Repository can sign in again with valid identity provider credentials for the same account, and then receives a new session with the roles of that account. The attacker needs no Nexus Repository session and no Nexus Repository privilege. The attacker needs a named account that holds valid credentials at the identity provider. The anonymous user is not part of this attack path.
-
CVE-2026-123051
The REV.exe module distributed with Farmasimplex contains embedded OAuth client credentials for integration with the IZS platform. An attacker with access to the executable could extract and reuse the credentials, potentially leading to unauthorized access to integration resources or manipulation of associated information, depending on the privileges granted and authentication controls in place.
-
CVE-2026-123812
Dynatrace MCP Server is an MCP server for Dynatrace Observability. Prior to 1.8.7, the create_dynatrace_notebook registration in src/index.ts performs a persistent document-write action without calling requestHumanApproval, although the project's other write tools use that gate to obtain operator consent. A caller can create tenant-visible notebooks containing attacker-controlled Markdown or DQL content, and tenant users may later execute embedded DQL when opening the notebook. The tool also lacks a destructiveHint annotation that would signal its side effects to MCP clients. This issue is fixed in version 1.8.7.
-
CVE-2026-86990
An access issue was addressed with improved access restrictions. This issue is fixed in iOS 18.7.11 and iPadOS 18.7.11, iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Tahoe 26.7.2, visionOS 27.2. A malicious app may be able to access the camera without user permission.
-
CVE-2026-63243
An authentication vulnerability in the Bluetooth Low Energy (BLE) implementation of Creative Sound Blaster Katana could allow an attacker within Bluetooth range to connect to an affected device without prior pairing or authentication.
-
CVE-2026-122118
In certain Yealink products before 2026-04-15, when the Wi-Fi AP function is enabled, a default 8-digit numeric PSK with insufficient strength is used. Attackers can exploit this weakness via brute-force attacks to gain unauthorized network access and intercept Wi-Fi traffic.
-
CVE-2026-69002
Incorrect authorization in Samsung framework services due to missing permission checks
-
CVE-2026-21165
Insufficient session expiration in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to bypass device authentication. User interaction is required for triggering this vulnerability.
-
CVE-2026-109154
In the Matter door lock applications of the Nordic Semiconductor nRF Door Lock and Access Control Add-on v1.0.0 through v1.1.1, AccessManager::ValidateCredential() checks only credential occupancy and the secret bytes, and never reads the owning user's UserStatus. It also returns success when no owning user can be resolved. A user suspended by setting their status to OccupiedDisabled can continue to unlock the door with their previously assigned credential, and an orphaned but occupied credential is also accepted. Fixed in v1.2.0.
-
CVE-2026-123994
Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains an unauthenticated access vulnerability in the DIAL (Discovery and Launch) service on TCP port 56789, which accepts control requests from any LAN-adjacent device without authentication, pairing, or user notification. Attackers can query running application states, enumerate installed applications via HTTP response codes, terminate active sessions with a DELETE request, and launch applications or bypass YouTube's Origin check by spoofing the Origin header to disclose viewing activity and subscriptions or disrupt device functionality.
A list of CVEs whose flaw type is auth & access, sorted by how likely they are to be exploited (EPSS). Classification uses the CWE weakness id where present, and a small local model otherwise.