Being exploited right now.

A buffer overflow was found in the MikroTik RouterOS SMB service when processing NetBIOS session request messages. Remote attackers with access to the service can exploit this vulnerability and gain code execution on the system. The overflow occurs before authentication takes place, so it is possible for an unauthenticated remote attacker to exploit it. All architectures and all devices running RouterOS before versions 6.41.3/6.42rc27 are vulnerable.

Drop everything exploited Memory safety Network gear Mikrotik Routeros

An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution.

Drop everything exploited Memory safety Network gear Dlink dir-825 r1 Firmware

A heap-based buffer overflow vulnerability [CWE-122] in FortiOS SSL-VPN 7.2.0 through 7.2.2, 7.0.0 through 7.0.8, 6.4.0 through 6.4.10, 6.2.0 through 6.2.11, 6.0.15 and earlier and FortiProxy SSL-VPN 7.2.0 through 7.2.1, 7.0.7 and earlier may allow a remote unauthenticated attacker to execute arbitrary code or commands via specifically crafted requests.

Drop everything exploited Memory safety Network gear Fortinet Fortios

Realtek Jungle SDK version v2.x up to v3.4.14B provides an HTTP web server exposing a management interface that can be used to configure the access point. Two versions of this management interface exists: one based on Go-Ahead named webs and another based on Boa named boa. Both of them are affected by these vulnerabilities. Specifically, these binaries are vulnerable to the following issues: - stack buffer overflow in formRebootCheck due to unsafe copy of submit-url parameter - stack buffer overflow in formWsc due to unsafe copy of submit-url parameter - stack buffer overflow in formWlanMultipleAP due to unsafe copy of submit-url parameter - stack buffer overflow in formWlSiteSurvey due to unsafe copy of ifname parameter - stack buffer overflow in formStaticDHCP due to unsafe copy of hostname parameter - stack buffer overflow in formWsc due to unsafe copy of 'peerPin' parameter - arbitrary command execution in formSysCmd via the sysCmd parameter - arbitrary command injection in formWsc via the 'peerPin' parameter Exploitability of identified issues will differ based on what the end vendor/manufacturer did with the Realtek SDK webserver. Some vendors use it as-is, others add their own authentication implementation, some kept all the features from the server, some remove some of them, some inserted their own set of features. However, given that Realtek SDK implementation is full of insecure calls and that developers tends to re-use those examples in their custom code, any binary based on Realtek SDK webserver will probably contains its own set of issues on top of the Realtek ones (if kept). Successful exploitation of these issues allows remote attackers to gain arbitrary code execution on the device.

Drop everything exploited Memory safety Network gear Realtek rtl819x Jungle Software Development Kit

fastping.c in MRLG (aka Multi-Router Looking Glass) before 5.5.0 allows remote attackers to cause an arbitrary memory write and memory corruption.

Drop everything exploited Memory safety Network gear multi-router Looking Glass Project multi-router Looking Glass

Sensitive information disclosure in NetScaler ADC and NetScaler Gateway when configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA  virtual server.

Drop everything exploited Memory safety Network gear Citrix Netscaler Application Delivery Controller

Insufficient input validation leading to memory overread when the NetScaler is configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server

Drop everything exploited Memory safety Network gear Citrix Netscaler Application Delivery Controller

A heap-based buffer overflow vulnerability [CWE-122] in FortiOS version 7.2.4 and below, version 7.0.11 and below, version 6.4.12 and below, version 6.0.16 and below and FortiProxy version 7.2.3 and below, version 7.0.9 and below, version 2.0.12 and below, version 1.2 all versions, version 1.1 all versions SSL-VPN may allow a remote attacker to execute arbitrary code or commands via specifically crafted requests.

Drop everything exploited Memory safety Network gear Fortinet Fortiproxy

A out-of-bounds write vulnerability in Fortinet FortiOS 7.4.0 through 7.4.2, FortiOS 7.2.0 through 7.2.6, FortiOS 7.0.0 through 7.0.13, FortiOS 6.4.0 through 6.4.14, FortiOS 6.2.0 through 6.2.15, FortiOS 6.0 all versions, FortiProxy 7.4.0 through 7.4.2, FortiProxy 7.2.0 through 7.2.8, FortiProxy 7.0.0 through 7.0.14, FortiProxy 2.0.0 through 2.0.13, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to execute unauthorized code or commands via specifically crafted requests

Drop everything exploited Memory safety Network gear Fortinet Fortiproxy

The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution.

Drop everything exploited Memory safety Network gear Netgear d6100 Firmware

When a BIG-IP APM access policy and an OAuth profile are configured on a virtual server, specific malicious traffic can lead to remote code execution (RCE). This vulnerability is only present when BIG-IP APM is configured as an OAuth Authorization Server. Deployments using APM strictly as an OAuth Client / Resource Server (without OAuth authorization server profiles configured) are not affected by this vulnerability. Impact: This vulnerability allows an unauthenticated attacker to perform remote code execution. The BIG-IP system in Appliance mode is also vulnerable. This is a data plane issue; there is no control plane exposure. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Drop everything exploited Memory safety Network gear f5 big-ip Access Policy Manager

A stack-based buffer overflow in Ivanti Connect Secure before version 22.7R2.6, Ivanti Policy Secure before version 22.7R1.4, and Ivanti ZTA Gateways before version 22.8R2.2 allows a remote unauthenticated attacker to achieve remote code execution.

Drop everything exploited Memory safety Network gear Ivanti Connect Secure

A stack-based buffer overflow in Ivanti Connect Secure before version 22.7R2.5, Ivanti Policy Secure before version 22.7R1.2, and Ivanti Neurons for ZTA gateways before version 22.7R2.3 allows a remote unauthenticated attacker to achieve remote code execution.

Drop everything exploited Memory safety Network gear Ivanti Connect Secure

An Out-of-bounds Write vulnerability in the WatchGuard Fireware OS iked process may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the mobile user VPN with IKEv2 and the branch office VPN using IKEv2 when configured with a dynamic gateway peer. If the Firebox was previously configured with the mobile user VPN with IKEv2 or a branch office VPN using IKEv2 to a dynamic gateway peer, and both of those configurations have since been deleted, that Firebox may still be vulnerable if a branch office VPN to a static gateway peer is still configured.

Drop everything exploited Memory safety Network gear Watchguard Fireware

Insufficient input validation in NetScaler ADC and NetScaler Gateway when configured as a SAML IDP leading to memory overread

Drop everything exploited Memory safety Network gear Citrix Netscaler Application Delivery Controller

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Drop everything exploited Memory safety Network gear Cisco rv340 Firmware

A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker with valid VPN user credentials could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of the affected device.

Drop everything exploited Memory safety Network gear Cisco Adaptive Security Appliance Software

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Buffer Overflow via cgibin, hnap_main,

Drop everything exploited Memory safety Network gear Dlink go-rt-ac750 Firmware

The NSPLookupServiceNext function in the client in Microsoft Forefront Threat Management Gateway (TMG) 2010 allows remote attackers to execute arbitrary code via vectors involving unspecified requests, aka "TMG Firewall Client Memory Corruption Vulnerability."

Drop everything exploited Memory safety Network gear Microsoft Forefront Threat Management Gateway

NETGEAR WNR2000v3 devices before 1.1.2.14, WNR2000v4 devices before 1.0.0.66, and WNR2000v5 devices before 1.0.0.42 allow authentication bypass and remote code execution via a buffer overflow that uses a parameter in the administration webapp. The NETGEAR ID is PSV-2016-0261.

Drop everything exploited Memory safety Network gear Netgear wnr2000 Firmware

A stack-based buffer overflow vulnerability [CWE-121] vulnerability in Fortinet FortiCamera 2.1.0 through 2.1.3, FortiCamera 2.0 all versions, FortiCamera 1.1 all versions, FortiMail 7.6.0 through 7.6.2, FortiMail 7.4.0 through 7.4.4, FortiMail 7.2.0 through 7.2.7, FortiMail 7.0.0 through 7.0.8, FortiNDR 7.6.0, FortiNDR 7.4.0 through 7.4.7, FortiNDR 7.2.0 through 7.2.4, FortiNDR 7.0.0 through 7.0.6, FortiRecorder 7.2.0 through 7.2.3, FortiRecorder 7.0.0 through 7.0.5, FortiRecorder 6.4.0 through 6.4.5, FortiVoice 7.2.0, FortiVoice 7.0.0 through 7.0.6, FortiVoice 6.4.0 through 6.4.10 allows a remote unauthenticated attacker to execute arbitrary code or commands via sending HTTP requests with specially crafted hash cookie.

Drop everything exploited Memory safety Network gear Fortinet Fortimail

A buffer overflow vulnerability in the User-ID™ Authentication Portal (aka Captive Portal) service of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to execute arbitrary code with root privileges on the PA-Series and VM-Series firewalls by sending specially crafted packets. The risk of this issue is greatly reduced if you secure access to the User-ID™ Authentication Portal per the best practice guidelines https://knowledgebase.paloaltonetworks.com/KCSArticleDetail by restricting access to only trusted internal IP addresses. Prisma Access, Cloud NGFW and Panorama appliances are not impacted by this vulnerability.

Drop everything exploited Memory safety Network gear Paloaltonetworks pan-os

A buffer overflow vulnerability in the ID processing function in Zyxel ATP series firmware versions 4.32 through 5.36 Patch 1, USG FLEX series firmware versions 4.50 through 5.36 Patch 1, USG FLEX 50(W) firmware versions 4.25 through 5.36 Patch 1, USG20(W)-VPN firmware versions 4.25 through 5.36 Patch 1, VPN series firmware versions 4.30 through 5.36 Patch 1, ZyWALL/USG series firmware versions 4.25 through 4.73 Patch 1, could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions and even a remote code execution on an affected device.

Drop everything exploited Memory safety Network gear Zyxel atp100 Firmware

A buffer overflow vulnerability in the notification function in Zyxel ATP series firmware versions 4.60 through 5.36 Patch 1, USG FLEX series firmware versions 4.60 through 5.36 Patch 1, USG FLEX 50(W) firmware versions 4.60 through 5.36 Patch 1, USG20(W)-VPN firmware versions 4.60 through 5.36 Patch 1, VPN series firmware versions 4.60 through 5.36 Patch 1, ZyWALL/USG series firmware versions 4.60 through 4.73 Patch 1, could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions and even a remote code execution on an affected device.

Drop everything exploited Memory safety Network gear Zyxel atp100 Firmware

A buffer overflow vulnerability in SonicOS allows a remote attacker to cause Denial of Service (DoS) and potentially execute arbitrary code by sending a malicious request to the firewall. This vulnerability affected SonicOS Gen 6 version 6.5.4.7, 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version 7.0.0.0.

Drop everything exploited Memory safety Network gear Sonicwall Sonicos

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Drop everything exploited Memory safety Network gear Cisco rv340 Firmware

An Out-of-bounds Write vulnerability in the WatchGuard Fireware OS iked process may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the mobile user VPN with IKEv2 and the branch office VPN using IKEv2 when configured with a dynamic gateway peer. If the Firebox was previously configured with the mobile user VPN with IKEv2 or a branch office VPN using IKEv2 to a dynamic gateway peer, and both of those configurations have since been deleted, that Firebox may still be vulnerable if a branch office VPN to a static gateway peer is still configured.

Drop everything exploited Memory safety Network gear Watchguard Fireware

A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881.

Drop everything exploited Memory safety Network gear Cisco iOS Xe

The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959.

Drop everything exploited Memory safety Network gear Cisco iOS

Sophos XG Firewall 17.x through v17.5 MR12 allows a Buffer Overflow and remote code execution via the HTTP/S Bookmarks feature for clientless access. Hotfix HF062020.1 was published for all firewalls running v17.x.

Drop everything exploited Memory safety Network gear Sophos Xg Firewall Firmware

Memory overflow vulnerability leading to Remote Code Execution and/or Denial of Service in NetScaler ADC and NetScaler Gateway when NetScaler is configured as Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA virtual server (OR) NetScaler ADC and NetScaler Gateway 13.1, 14.1, 13.1-FIPS and NDcPP: LB virtual servers of type (HTTP, SSL or HTTP_QUIC) bound with IPv6 services or servicegroups bound with IPv6 servers (OR) NetScaler ADC and NetScaler Gateway 13.1, 14.1, 13.1-FIPS and NDcPP: LB virtual servers of type (HTTP, SSL or HTTP_QUIC) bound with DBS IPv6 services or servicegroups bound with IPv6 DBS servers (OR) CR virtual server with type HDX

Drop everything exploited Memory safety Network gear Citrix Netscaler Application Delivery Controller

Memory overflow vulnerability leading to unintended control flow and Denial of Service in NetScaler ADC and NetScaler Gateway when configured as Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server

Drop everything exploited Memory safety Network gear Citrix Netscaler Application Delivery Controller

Vulnerability in NetScaler ADC and NetScaler Gateway. This issue affects ADC: before 14.1-73.41, before 13.1-64.28, before 14.1-73.41 FIPS, and before 13.1-37.282; Gateway: before 14.1-73.41 and before 13.1-64.28.

exploited Memory safety Network gear Citrix Netscaler Application Delivery Controller

Buffer overflow in Cisco Adaptive Security Appliance (ASA) Software through 9.4.2.3 on ASA 5500, ASA 5500-X, ASA Services Module, ASA 1000V, ASAv, Firepower 9300 ASA Security Module, PIX, and FWSM devices allows remote authenticated users to execute arbitrary code via crafted IPv4 SNMP packets, aka Bug ID CSCva92151 or EXTRABACON.

exploited Memory safety Network gear Cisco Pix Firewall Software

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

exploited Memory safety Network gear Cisco iOS

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

exploited Memory safety Network gear Cisco iOS

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

exploited Memory safety Network gear Cisco rv340 Firmware

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

exploited Memory safety Network gear Cisco rv340 Firmware

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

exploited Memory safety Network gear Cisco rv340 Firmware

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

exploited Memory safety Network gear Cisco iOS

When a BIG-IP APM access policy is configured on a virtual server, specific malicious traffic can lead to Remote Code Execution (RCE).   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

exploited Memory safety Network gear f5 big-ip Access Policy Manager

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow the following: An authenticated, remote attacker with low privileges could cause a denial of service (DoS) condition on an affected device that is running Cisco IOS Software or Cisco IOS XE Software. To cause the DoS, the attacker must have the SNMPv2c or earlier read-only community string or valid SNMPv3 user credentials. An authenticated, remote attacker with high privileges could execute code as the root user on an affected device that is running Cisco IOS XE Software. To execute code as the root user, the attacker must have the SNMPv1 or v2c read-only community string or valid SNMPv3 user credentials and administrative or privilege 15 credentials on the affected device. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device over IPv4 or IPv6 networks. This vulnerability is due to a stack overflow condition in the SNMP subsystem of the affected software. A successful exploit could allow a low-privileged attacker to cause the affected system to reload, resulting in a DoS condition, or allow a high-privileged attacker to execute arbitrary code as the root user and obtain full control of the affected system. Note: This vulnerability affects all versions of SNMP.

exploited Memory safety Network gear Cisco iOS Xe sd-wan

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

exploited Memory safety Network gear Cisco iOS

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

exploited Memory safety Network gear Cisco iOS

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

exploited Memory safety Network gear Cisco iOS

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

exploited Memory safety Network gear Cisco iOS

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

exploited Memory safety Network gear Cisco iOS

Multiple Buffer Overflow vulnerabilities in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCuo17183, CSCvd73487.

exploited Memory safety Network gear Cisco iOS

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow condition on the affected device, which will cause the device to reload and result in a DoS condition. Cisco Bug IDs: CSCvg62730.

exploited Memory safety Network gear Cisco iOS

A stack-based buffer overflow vulnerability in the CGI program of Zyxel GS1900-48HPv2 firmware versions through 2.90(ABTQ.1)C0 could allow a LAN-based, unauthenticated attacker to exploit the flaw and potentially execute OS commands via a crafted HTTP request.

exploited Memory safety Network gear Zyxel gs1900-8 Firmware