Critical, and still unpatched.
Critical-severity CVEs with no patch or advisory linked yet. These are the ones to watch.
-
CVE-2026-131157
Improper neutralization of special elements used in an OS command in the package broker in Devolutions Agent 2026.3.0 and 2026.2.4 on Windows allows a local authenticated user to execute arbitrary commands with elevated privileges via crafted custom package parameters.
-
CVE-2026-126552
Missing Authentication for Critical Function, OS Command Injection vulnerability in Broadcom AutoSys Workload Automation (Workload Control Center (WCC) modules) on Windows, Linux allows OS Command Injection.This issue affects AutoSys Workload Automation: from 12.1 through 24.0.01.
-
CVE-2026-59625
In GetTwiddledMiptreeSparsePageMap of texmgmt.c, there is a possible way to trigger an out of bounds write due to a logic error. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-58722
In chppProcessDiscoverAllResponse of system/chre/chpp/clients/discovery.c, there is a possible Heap Buffer Overflow due to a logic error in the code. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-56971
In AudioSession::SendInternalEvent of AudioSession.cpp, there is a possible Double Free due to a logic error in the code. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-57010
In EncodeLastScanBufferElement of data_manager.cc, there is a possible out-of-bounds write due to a logic error in the code. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-55335
In multiple locations, there is a possible use-after-free due to a logic error in the code. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-59626
In SendInfo of UssiController.cpp, there is a possible way to corrupt memory via a dangling connection listener pointer due to a use after free. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-58800
In IMG_vkCreateImageView of image_view.c, there is a possible way to trigger a use after free due to memory corruption. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-58799
In multiple functions of rmmi_utility.c, there is a possible way to trigger an out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-58780
In multiple locations, there is a possible out-of-bounds write due to an incorrect bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-58736
In NotifySipResponse of SessionEx.cpp, there is a possible way to corrupt memory via a dangling connection pointer in the pending response queue due to a use after free. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-58681
In multiple locations, there is a possible out-of-bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-58705
In handleEvent of gscan.cpp, there is a possible way to trigger an out of bounds write on the heap due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-57047
In __mfc_core_nal_q_get_dec_metadata_sei_nal of mfc_core_nal_q.c, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-55362
In multiple files, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-126553
Deserialization of Untrusted Data vulnerability in Broadcom AutoSys Workload Automation (Workload Control Center (WCC) modules) on Windows, Linux allows Object Injection.This issue affects AutoSys Workload Automation: from 12.1 through 24.0.01.
-
CVE-2026-126551
Use of Hard-coded Cryptographic Key vulnerability in Broadcom AutoSys Workload Automation (Workload Control Center (WCC) modules) on Windows, Linux allows Session Credential Falsification through Forging.This issue affects AutoSys Workload Automation: from 12.1 through 24.2.00.
-
CVE-2026-95645
Zohocorp Manageengine DDI Central build below 6500 are affected by a authenticated command injection vulnerability in the Windows DDI Agent's clear_blocked_domains functionality, allowing specially crafted blocked-domain values to trigger arbitrary command execution on Windows systems.
-
CVE-2026-95643
Zohocorp Manageengine DDI Central build below 6500 are affected by a authenticated PowerShell command injection vulnerability in the Telnet connectivity feature, allowing specially crafted IPv6 scope identifiers to execute arbitrary commands on managed Windows nodes.
-
CVE-2026-129255
A vulnerability was identified in CoolerMaster MASTERPLUS+ 1.9.6. This affects the function sub_11504 in the library WinRing0x64.sys of the component Device Driver. The manipulation of the argument PhysicalAddress leads to incorrect default permissions. The attack can only be performed from a local environment. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-61887
Missing critical step in authentication in the MigTD SPDM rebind implementation for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow an escalation of privilege and information disclosure. Network adversary with an unauthenticated user combined with a low complexity attack may enable remote code execution. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (high) impacts.
-
CVE-2026-19422
Zohocorp ManageEngine DDI Central versions below 6301 is affected by an authentication bypass vulnerability in Windows DNS and DHCP agent synchronization APIs, allowing unauthenticated user to impersonate onboarded Windows servers and perform unauthorized DNS and DHCP modifications.
-
CVE-2026-44685
Authentication bypass by spoofing in the MigTD rebinding protocol for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable local code execution. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (high) impacts.
-
CVE-2026-113363
Improper Input Validation in the network communication processing in NEC Corporation WebSAM WinShare Ver 7.2.0 through 7.5.0, Ver 7.6.0 and Ver 7.7.0 through 7.7.2 on Windows allows a remote unauthenticated attacker to execute arbitrary commands with SYSTEM privileges via a crafted network packet sent to the computer on which WinShare is running.
-
CVE-2026-126837
A validation flaw in the DNS SRV host discovery of the MongoDB Node.js driver may cause the driver to connect to a host outside the expected domain. For a mongodb+srv:// connection string, the driver checks each host name in the DNS SRV response against the domain of the connection string. The driver then builds the connection address from the original name, in which certain characters end the host name early. An unauthenticated party who can forge or change the DNS SRV response may redirect the connection to a host of their choice. TLS does not prevent this, because the driver verifies the server certificate against the redirected host name. This may result in unintended disclosure of application data and authentication credentials, and in altered query results. Applications that use mongodb:// connection strings are not affected.
-
CVE-2026-113364
Buffer Overflow in the data receiving process in NEC Corporation WebSAM WinShare Ver 7.5.0 and earlier, Ver 7.6.0 and Ver 7.7.0 through 7.7.2 on Windows allows a remote unauthenticated attacker to execute arbitrary code with SYSTEM privileges via a crafted packet with a malformed data size value in the protocol header.
-
CVE-2026-121295
On affected platforms running Arista EOS configured as S-BFD peers, an unauthenticated attacker could send a crafted S-BFD PDU to an initiator device. This crafted PDU could cause the kernel on the initiator device to crash, resulting in an unexpected device reboot.
-
CVE-2026-61473
Authentication bypass by capture-replay in the MigTD for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (none) impacts.
-
CVE-2026-95732
An authentication bypass vulnerability exists in the underlying operating system of HPE Networking Fabric Composer. Successful exploitation could allow an unauthenticated adjacent attacker to execute arbitrary code on the affected system.
-
CVE-2026-120808
An issue exists in MongoDB's macOS TLS client implementation where certificate chain-of-trust validation is bypassed for outbound connections to IPv6-addressed peers. When a MongoDB process using the Apple SecureTransport TLS backend connects to an IPv6 target, the trust evaluation result from SecTrustEvaluate is silently discarded, regardless of whether the peer's certificate is trusted. An on-path party could exploit this by presenting a self-signed certificate containing the target's IPv6 address in the Subject Alternative Name to intercept and modify encrypted inter-node or external service traffic. This issue only affects MongoDB processes running on macOS with the Apple SecureTransport TLS provider.
-
CVE-2026-74912
On GPU systems with the security vulnerability fix for CVE-2026-49746 applied, the mapping range of graphics buffers is limited which causes errors when the mapping outside of that range. Integer truncation caused when mapping GPU buffer pages in the buffer’s range 0GB - 4GB, produces error and limits the functionality of the kernel mode driver.
-
CVE-2026-99153
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warning. Validate the reflected ITT the way iscsi_itt_to_ctask() validates a command ITT, and require the task to be in flight and not a SCSI command. [ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206 [ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25 [ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060 [ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504 [ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000 [ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000 [ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000 [ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0 [ 6.255439] PKRU: 55555554 [ 6.255564] Call Trace: [ 6.255674] <IRQ> [ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0 [ 6.256733] iscsi_complete_pdu+0x54/0xa0 [ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250 [ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.258061] __tcp_read_sock+0x1ab/0x810 [ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.259808] tcp_data_queue+0x1f13/0x4cd0 [ 6.260567] tcp_rcv_established+0x8a5/0x3a00 [ 6.261931] tcp_v4_do_rcv+0x449/0x960 [ 6.262269] tcp_v4_rcv+0x2245/0x3bc0
-
CVE-2026-99154
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Reject a negative task index from parse_pdu_itt A transport that implements parse_pdu_itt hands libiscsi an index taken from the PDU, and both lookups bound it from above only: if (i >= session->cmds_max) i and cmds_max are both int, so a negative index passes and session->cmds[i] is read from before the array. be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag, *index = (int)itt; and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the hardware async ring without replacing its ITT, so the value is the target's. It also reports the session's own age rather than the one in the tag, which leaves the age comparison in iscsi_verify_itt() with nothing to reject. Bound the index from below in both lookups.
-
CVE-2026-118131
GnuPG (version 2.5.21) for Windows contains a vulnerability where default Discretionary Access Control List (DACL) inheritance on the C:\ProgramData directory allows members of the BUILTIN\Users group to create arbitrary subdirectories under this path. An attacker with low-privilege access can create the expected GnuPG configuration directory and inject malicious configuration files consumed by GnuPG components. This can result in code execution within the security context of the victim user.
-
CVE-2026-121022
Use of Default Password (CWE-1393) in the web client in AxxonSoft Axxon One before 3.0.0 on Windows and Linux allows a remote unauthenticated attacker to log in as the built-in administrator with the default credentials on a newly installed system, because the web client did not enforce the mandatory change of the default password on first login.
-
CVE-2026-98959
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xattrs are packed in the same item If we have a btrfs_dir_item item that packs multiple xattrs and then we replace the value of one of them (with the setxattr(2) family of syscalls) with another value of a different size, we end up not having a fully initialized btrfs_dir_item, resulting in a corruption that the tree checker will detect at extent buffer writeback time. This is because in btrfs_setxattr() when we find a btrfs_dir_item with multiple xattrs (due to the crc32c hash of their name being the same) we delete one of the xattr items (btrfs_dir_item) and then insert a new one, but the deletion and insertion results in shifting existing data in the leaf and therefore when the new value of a xattr has a different size, the new btrfs_dir_item is placed in a leaf section that was not initialized and we only copy the value's data and set the value's length in the new btrfs_dir_item, without setting the name, the name's length, the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and transaction ID. The following script reproduces the issue: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT touch $MNT/testfile # Add two xattrs that, on btrfs, have the same hash (crc32c) for their # name and therefore are packed into the same btrfs_dir_item. setfattr -n user.foobar -v 123 $MNT/testfile setfattr -n user.WvG1c1Td -v qwerty $MNT/testfile # Verify the xattrs are present. echo "xattrs before:" getfattr --absolute-names --dump $MNT/testfile # Now replace the value of the foobar xattr with a significantly larger # value. setfattr -n user.foobar -v abcdefghijklmnopqrstuvwxyz $MNT/testfile # Check the xattrs have the expected values. echo "xattrs after:" getfattr --absolute-names --dump $MNT/testfile umount $MNT Running it: $ ./test.sh (...) xattrs before: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" user.foobar="123" xattrs after: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" So the "user.foobar" xattr is missing and there was a transaction abort when unmounting the fs with the following traces in dmesg: $ dmesg [869800.159271] BTRFS warning (device sdi): access to eb bytenr 30474240 len 16384 out of range start 16015 len 25964 [869800.159293] ------------[ cut here ]------------ [869800.159296] WARNING: fs/btrfs/extent_io.c:4408 at report_eb_range+0x44/0x60 [btrfs], CPU#8: getfattr/2605179 [869800.168961] Modules linked in: btrfs dm_thin_pool (...) [869800.190527] CPU: 8 UID: 0 PID: 2605179 Comm: getfattr Tainted: G W 7.3.0-rc3-btrfs-next-244+ #1 PREEMPT(full) [869800.193726] Tainted: [W]=WARN [869800.194502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [869800.197576] RIP: 0010:report_eb_range+0x44/0x60 [btrfs] [869800.198985] Code: 48 8b 7b 18 (...) [869800.203531] RSP: 0018:ffffce4541937d58 EFLAGS: 00010246 [869800.204609] RAX: 0000000000000000 RBX: ffff8dde054b8738 RCX: 0000000000000000 [869800.206137] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc04c92a0 [869800.207645] RBP: 0000000000003e8f R08: 0000000000000000 R09: 3fffffffffefffff [869800.226175] R10: ffffce4541937a88 R11: 0000000000000003 R12: 000000000000656c [869800.227594] R13: ffff8dde14be800f R14: 000000000000656c R15: 0000000000000069 [869800.229097] FS: 00007f59023bb780(0000) GS:ffff8de5788ed000(0000) knlGS:0000000000000000 [869800.231137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [869800.232321] CR2: 0000558dc45e6a78 CR3: 0000000765b16004 CR4: 0000000000370ef0 [869800.233783] Call Trace: [869800.234330] <TASK> [869800.234791] read_extent_buffer+0x4d/0x100 [btrfs] [869800.235898] btrfs_listxattr+0x199/0x240 [btrfs] [869800.236912] vfs_listxattr+0x51/0 ---truncated---
-
CVE-2026-99079
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on refill retry When an XDP redirect to an AF_XDP socket fails because its RX ring is full, the XSK core frees the buffer. During the subsequent batched refill of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before allocating a replacement. If that refill succeeds only partially, a WQE left without a replacement retains its old buffer pointer. The buffer can meanwhile be allocated to another WQE. A later refill retry can then free the live buffer through the stale pointer and publish the same UMEM frame twice. Mark the WQE as released immediately after the driver-side free. The flag is already cleared when a replacement buffer is assigned, so refill retries no longer release stale pointers. The failure is silent and produces no kernel warning or splat. A standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914 packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64 ownership/double-publication errors. With this change it processed 356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events, with no ownership or data errors.
-
CVE-2026-99078
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on MPWQE refill retry With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until an MPWQE is refilled. If XSK allocation then returns -ENOMEM, actual_wq_head is not advanced and a later NAPI poll retries the same WQE. mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On retry it can therefore call xsk_buff_free() again through stale pointers after the frames have returned to the XSK pool and been reallocated. Set all skip_release_bitmap bits in the common error path of mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A successful allocation already clears the bitmap after replacing every buffer, so retries become idempotent without changing the success path. Fault injection forced three consecutive failures for one selected MPWQE. Both an early allocation failure and a partial 8-of-16-buffer unwind released the original 16 XSK buffers only once. Each error left a full bitmap, the following NAPI retry skipped the release, and a later successful allocation cleared it. A 20-second AF_XDP zero-copy pressure run exercised 1,575,262 buffer allocation failures without invalid descriptors, WQE errors, or kernel warnings.
-
CVE-2026-79872
A buffer overflow vulnerability exists in the underlying operating system of AOS that could lead to unauthenticated remote code execution by an unauthenticated remote attacker. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
Critical CVEs are vulnerabilities scored 9.0 or higher on the CVSS scale. This list shows the ones with no patch or vendor advisory linked yet, ranked by how likely they are to be exploited (EPSS).