Critical, and still unpatched.
Critical-severity CVEs with no patch or advisory linked yet. These are the ones to watch.
-
CVE-2019-9161
WAC on the Sangfor Sundray WLAN Controller version 3.7.4.2 and earlier has a Remote Code Execution issue allowing remote attackers to achieve full access to the system, because shell metacharacters in the nginx_webconsole.php Cookie header can be used to read an etc/config/wac/wns_cfg_admin_detail.xml file containing the admin password. (The password for root is the WebUI admin password concatenated with a static string.)
-
CVE-2017-8116
The management interface for the Teltonika RUT9XX routers (aka LuCI) with firmware 00.03.265 and earlier allows remote attackers to execute arbitrary commands with root privileges via shell metacharacters in the username parameter in a login request.
-
CVE-2018-14010
OS command injection in the guest Wi-Fi settings feature in /cgi-bin/luci on Xiaomi R3P before 2.14.5, R3C before 2.12.15, R3 before 2.22.15, and R3D before 2.26.4 devices allows an attacker to execute any command via crafted JSON data.
-
CVE-2018-14060
OS command injection in the AP mode settings feature in /cgi-bin/luci /api/misystem/set_router_wifiap on Xiaomi R3D before 2.26.4 devices allows an attacker to execute any command via crafted JSON data.
-
CVE-2020-21935
A command injection vulnerability in HNAP1/GetNetworkTomographySettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary code.
-
CVE-2021-42232
TP-Link Archer A7 Archer A7(US)_V5_210519 is affected by a command injection vulnerability in /usr/bin/tddp. The vulnerability is caused by the program taking part of the received data packet as part of the command. This will cause an attacker to execute arbitrary commands on the router.
-
CVE-2017-11588
On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd.
-
CVE-2018-17063
An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters.
-
CVE-2013-10048
An OS command injection vulnerability exists in various legacy D-Link routers—including DIR-300 rev B and DIR-600 (firmware ≤ 2.13 and ≤ 2.14b01, respectively)—due to improper input handling in the unauthenticated command.php endpoint. By sending specially crafted POST requests, a remote attacker can execute arbitrary shell commands with root privileges, allowing full takeover of the device. This includes launching services such as Telnet, exfiltrating credentials, modifying system configuration, and disrupting availability. The flaw stems from the lack of authentication and inadequate sanitation of the cmd parameter.
-
CVE-2020-13118
An issue was discovered in Mikrotik-Router-Monitoring-System through 2018-10-22. SQL Injection exists in check_community.php via the parameter community.
-
CVE-2022-26186
TOTOLINK N600R V4.3.0cu.7570_B20200620 was discovered to contain a command injection vulnerability via the exportOvpn interface at cstecgi.cgi.
-
CVE-2022-22140
An os command injection vulnerability exists in the confsrv ucloud_add_node functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a malicious packet to trigger this vulnerability.
-
CVE-2022-27268
InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component get_cgi_from_memory. This vulnerability is triggered via a crafted packet.
-
CVE-2022-27269
InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component config_ovpn. This vulnerability is triggered via a crafted packet.
-
CVE-2022-21178
An os command injection vulnerability exists in the confsrv ucloud_add_new_node functionality of TCL LinkHub Mesh Wifi MS1G_00_01.00_14. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a malicious packet to trigger this vulnerability.
-
CVE-2018-20334
An issue was discovered in ASUSWRT 3.0.0.4.384.20308. When processing the /start_apply.htm POST data, there is a command injection issue via shell metacharacters in the fb_email parameter. By using this issue, an attacker can control the router and get shell.
-
CVE-2023-48842
D-Link Go-RT-AC750 revA_v101b03 was discovered to contain a command injection vulnerability via the service parameter at hedwig.cgi.
-
CVE-2024-44411
D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the msp_info_htm function.
-
CVE-2021-33962
China Mobile An Lianbao WF-1 router v1.0.1 is affected by an OS command injection vulnerability in the web interface /api/ZRUsb/pop_usb_device component.
-
CVE-2023-39638
D-LINK DIR-859 A1 1.05 and A1 1.06B01 Beta01 was discovered to contain a command injection vulnerability via the lxmldbc_system function at /htdocs/cgibin.
-
CVE-2018-17068
An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter.
-
CVE-2018-17787
On D-Link DIR-823G devices, the GoAhead configuration allows /HNAP1 Command Injection via shell metacharacters in the POST data, because this data is sent directly to the "system" library function.
-
CVE-2022-27276
InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_10F2C. This vulnerability is triggered via a crafted packet.
-
CVE-2019-17510
D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary OS commands as root by leveraging admin access and sending a /HNAP1/ request for SetWizardConfig with shell metacharacters to /squashfs-root/www/HNAP1/control/SetWizardConfig.php.
-
CVE-2018-9285
Main_Analysis_Content.asp in /apply.cgi on ASUS RT-AC66U, RT-AC68U, RT-AC86U, RT-AC88U, RT-AC1900, RT-AC2900, and RT-AC3100 devices before 3.0.0.4.384_10007; RT-N18U devices before 3.0.0.4.382.39935; RT-AC87U and RT-AC3200 devices before 3.0.0.4.382.50010; and RT-AC5300 devices before 3.0.0.4.384.20287 allows OS command injection via the pingCNT and destIP fields of the SystemCmd variable.
-
CVE-2022-36786
DLINK - DSL-224 Post-auth RCE. DLINK router version 3.0.8 has an interface where you can configure NTP servers (Network Time Protocol) via jsonrpc API. It is possible to inject a command through this interface that will run with ROOT permissions on the router.
-
CVE-2019-17509
D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary OS commands as root by leveraging admin access and sending a /HNAP1/ request for SetMasterWLanSettings with shell metacharacters to /squashfs-root/www/HNAP1/control/SetMasterWLanSettings.php.
-
CVE-2022-27270
InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component ipsec_secrets. This vulnerability is triggered via a crafted packet.
-
CVE-2022-27271
InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component python-lib. This vulnerability is triggered via a crafted packet.
-
CVE-2022-27272
InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_1791C. This vulnerability is triggered via a crafted packet.
-
CVE-2022-27273
InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_12168. This vulnerability is triggered via a crafted packet.
-
CVE-2022-27274
InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_12028. This vulnerability is triggered via a crafted packet.
-
CVE-2022-27275
InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_122D0. This vulnerability is triggered via a crafted packet.
-
CVE-2016-6558
A command injection vulnerability exists in apply.cgi on the ASUS RP-AC52 access point, firmware version 1.0.1.1s and possibly earlier, web interface specifically in the action_script parameter. The action_script parameter specifies a script to be executed if the action_mode parameter does not contain a valid state. If the input provided by action_script does not match one of the hard coded options, then it will be executed as the argument of either a system() or an eval() call allowing arbitrary commands to be executed.
-
CVE-2022-26997
Arris TR3300 v1.0.13 was discovered to contain a command injection vulnerability in the upnp function via the upnp_ttl parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.
-
CVE-2022-26998
Arris TR3300 v1.0.13 was discovered to contain a command injection vulnerability in the wps setting function via the wps_enrolee_pin parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.
-
CVE-2022-26999
Arris TR3300 v1.0.13 was discovered to contain a command injection vulnerability in the static ip settings function via the wan_ip_stat, wan_mask_stat, wan_gw_stat, and wan_dns1_stat parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.
-
CVE-2022-27000
Arris TR3300 v1.0.13 was discovered to contain a command injection vulnerability in the time and time zone function via the h_primary_ntp_server, h_backup_ntp_server, and h_time_zone parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.
-
CVE-2022-27001
Arris TR3300 v1.0.13 were discovered to contain a command injection vulnerability in the dhcp function via the hostname parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.
-
CVE-2023-26822
D-Link Go-RT-AC750 revA_v101b03 was discovered to contain a command injection vulnerability via the service parameter at soapcgi.main.
-
CVE-2021-30230
The api/ZRFirmware/set_time_zone interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the zonename parameter.
-
CVE-2021-30231
The api/zrDm/set_ZRElink interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the bssaddr, abiaddr, devtoken, devid, elinksync, or elink_proc_enable parameter.
-
CVE-2021-30232
The api/ZRIGMP/set_IGMP_PROXY interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the IGMP_PROXY_WAN_CONNECT parameter.
-
CVE-2021-30233
The api/ZRIptv/setIptvInfo interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the iptv_vlan parameter.
-
CVE-2021-30234
The api/ZRIGMP/set_MLD_PROXY interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the MLD_PROXY_WAN_CONNECT parameter.
-
CVE-2021-30228
The api/ZRAndlink/set_ZRAndlink interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the iandlink_proc_enable parameter.
-
CVE-2016-10760
On Seowon Intech routers, there is a Command Injection vulnerability in diagnostic.cgi via shell metacharacters in the ping_ipaddr parameter.
-
CVE-2019-1581
A remote code execution vulnerability in the PAN-OS SSH device management interface that can lead to unauthenticated remote users with network access to the SSH management interface gaining root access to PAN-OS. This issue affects PAN-OS 7.1 versions prior to 7.1.24-h1, 7.1.25; 8.0 versions prior to 8.0.19-h1, 8.0.20; 8.1 versions prior to 8.1.9-h4, 8.1.10; 9.0 versions prior to 9.0.3-h3, 9.0.4.
-
CVE-2024-44410
D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the upgrade_filter_asp function.
-
CVE-2020-11963
IQrouter through 3.3.1, when unconfigured, has multiple remote code execution vulnerabilities in the web-panel because of Bash Shell Metacharacter Injection. Note: The vendor claims that this vulnerability can only occur on a brand-new network that, after initiating the forced initial configuration (which has a required step for setting a secure password on the system), makes this CVE invalid. This vulnerability is “true for any unconfigured release of OpenWRT, and true of many other new Linux distros prior to being configured for the first time”
Critical CVEs are vulnerabilities scored 9.0 or higher on the CVSS scale. This list shows the ones with no patch or vendor advisory linked yet, ranked by how likely they are to be exploited (EPSS).