Server CVEs.

IBM API Connect 10.0.8.0 through 10.0.8.12 could allow a remote attacker to gain full administrative control due to the use of a cryptographically weak pseudo-random number generator.

Crypto Server

Tracecat is an open-source security automation platform for teams and AI agents. From version 0.37.0 until 1.0.0-beta.49, Docker Compose deployments with SAML enabled can render SAML_SIGNED_ASSERTIONS and SAML_SIGNED_RESPONSES as empty values, overriding secure application defaults and disabling both signature requirements. An unauthenticated attacker who can reach the SAML assertion consumer endpoint can submit a forged unsigned response for an existing Tracecat user email address and obtain that user’s session. Targeting an existing superadmin can result in superadmin account takeover. Exploitation does not create users when SAML user creation is disabled and does not affect default Fargate or Helm deployments. Version 1.0.0-beta.49 removes the insecure deployment pass-through and requires signed assertions and responses.

Crypto Server

IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to bypass authentication due to improper certificate validation. A certificate check is not performed reliably in all cases, which could allow a connection to be accepted without proper authentication.

Crypto Server

Hickory DNS hickory-net 0.26.0-beta.1 before 0.26.2 and hickory-proto 0.24.0 through 0.26.0-alpha.1 compare DNSKEY public keys against DNSSEC trust anchors without checking the DNSKEY record name, so an RRset made up only of trusted keys is accepted without RRSIG verification. Attackers able to spoof or control name server responses can replace a secure zone's DNSKEY RRset with the root zone's keys, and use a large TTL to keep it cached.

Crypto Server

IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a network-positioned attacker to intercept backup data due to improper verification of the backup server's identity. The identity of the backup server is not verified when the secure connection for analytics backups is established, which could allow backup data, and credentials if used, to be intercepted.

Crypto Server

IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

Crypto Server

Kyverno 1.18.0 before 1.19.2 contains a signature verification bypass in verifyImages because cached verification results are keyed by the image reference string (such as a tag) rather than bound to the verified digest, so cache hits skip signature and attestation checks. An attacker who can submit workloads and move a registry tag can warm the cache with a signed image, repoint the tag, and have Kyverno admit the workload and use mutateDigest to pin the unverified digest.

Crypto Server Kyverno

IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote attacker to bypass authentication and inject unauthorized configuration changes due to improper certificate validation.

Crypto Server

In JetBrains IntelliJ IDEA before 2026.3 host name verification was missing for server TLS certificates

Crypto Server Jetbrains Intellij Idea

MinIO Signature V4 verification before RELEASE.2026-09-22T19-25-18Z accepts unsigned x-amz-* headers, letting a presigned PUT URL be escalated into a cross-bucket read.

Crypto Server

IBM Storage Scale 5.2.3.0 through 5.2.3.8, and 6.0.1.0 does not validate or improperly validates TLS certificate validation when communicating with remote cluster GUI interfaces, which could allow an attacker to inject forged JSON responses using man in the middle techniques.

Crypto Server

rustls before 0.23.46 contains a key exchange downgrade vulnerability that allows network attackers to poison the per-server-name key-exchange group record via an unauthenticated ServerHello. Attackers can answer one connection with a ServerHello selecting X25519, causing later ClientHellos to send only classical shares and lose post-quantum confidentiality.

Crypto Server

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, dtls_state_setup() compared a peer certificate with the SDP a=fingerprint only when FreeSWITCH was the DTLS client, not when it held the DTLS server role. An unauthenticated peer able to reach the negotiated media port could complete the DTLS-SRTP handshake with an unrelated certificate, obtain the leg's SRTP keys, decrypt and inject media, and displace the legitimate endpoint; on ICE-enabled legs the peer also needs the connectivity-check credentials from SDP, which generally requires signaling visibility or a position on its path. WebRTC and SIP DTLS-SRTP legs are affected whenever the peer selects the active role, while FreeSWITCH client-role handshakes already perform fingerprint validation. Version 1.11.2 introduces the remediation, which requires rtp_dtls_client_cert_verify_mode=fingerprint.

Crypto Server Freeswitch

undici is an HTTP client for Node.js. In versions 7.15.0 through 7.30.1 and 8.0.0 through 8.12.3, fetch verifies Subresource Integrity metadata by splitting the integrity string on a single space, but the SRI grammar separates metadata by ASCII whitespace, which also includes the horizontal tab. An integrity value whose digest is preceded by a tab or other ASCII whitespace is parsed as a single unrecognized token and skipped, and when no recognized algorithm remains undici treats the integrity list as empty and accepts the response, so a server returning a body different from the pinned digest passes the check. An application that pins a response with a valid but whitespace-surrounded SRI value receives attacker-controlled bytes with no integrity error, and the attacker needs only to control the response body, not the integrity metadata. The issue is fixed in undici 7.30.2 and 8.12.4, and users should upgrade to one of those versions or later. As a workaround, supply SRI integrity metadata without surrounding whitespace, using a single space to separate multiple digests.

Crypto Server

IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a local attacker to obtain sensitive information due to improper use of cryptography. The encryption applied to stored data is not implemented with sufficient strength, which weakens its protection.

Crypto Server

Progressive Robot hMailServer 6.0.0-B1 through 6.3.7 on Windows hands OpenSSL the names of its own TLS files - the listeners' certificates, chains, private keys and Diffie-Hellman parameters, a port's client-certificate CA file (from 6.2.19), the object store's CA file (from 6.3.4) and the ACME client's keys and certificates - as Latin-1 bytes, which on code page 1252 are the code page's own for U+00A0 to U+00FF, and OpenSSL's file opening on Windows reads a name as UTF-8 first and opens the file at that reading when it is there, or creates it there when its folder is. When every byte of a configured name outside ASCII also reads as UTF-8 - for example U+00C3 U+00A9, the bytes C3 A9, which are U+00E9 in UTF-8 - the server used the file at that other name whenever one was there, which allows a local attacker who can create that file or its folder but cannot change the configured one, as any user can by default beside a file an administrator keeps under ProgramData, to have a port that logs on by client certificate (from 6.2.25) accept certificates from a certificate authority of the attacker's own and so sign in over the network as any mailbox without its password; to have the server trust such an authority for its object store and, intercepting that connection, read and modify the messages it stores; to receive the private keys the ACME client writes, the key of a certificate issued for the server's names among them; or to keep TLS ports from starting. The configuration is not the default: by default these files have names in ASCII, client certificates are off on every port, and the object store and ACME are off. The Linux builds are not affected.

Crypto Server

Progressive Robot hMailServer 6.2.25 through 6.3.7 on Windows, with a PostgreSQL database, the connection's sslmode require, verify-ca or verify-full, and a root certificate file named by PostgreSQLSslRootCert (from 6.2.25) or, with TlsMode=verify-full and neither PostgreSQL key set, by TlsCaFile (from 6.3.4), hands the file's name to libpq as bytes in the system's ANSI code page (up to 6.3.5 as Latin-1 bytes, which on code page 1252 are the code page's own for U+00A0 to U+00FF), and libpq looks for the file by those bytes and then hands the same bytes to OpenSSL, whose file opening on Windows reads a name as UTF-8 first and opens the file at that reading when one is there. When every byte of the name outside ASCII also reads as UTF-8 - for example U+00C3 U+00A9, the bytes C3 A9 on code page 1252, which are U+00E9 in UTF-8 - the database server's certificate was checked against the file at that other name whenever one was there, which allows a local attacker who can create that file but cannot change the configured one, as any user can by default beside a file an administrator keeps under ProgramData, or beside a folder directly under the system drive's root whose permissions the administrator restricted, and who can intercept the connection to the database server or stand in for it, to have hMailServer trust a certificate authority of the attacker's own and read and modify the traffic between hMailServer and its database, the database password included; the file alone, holding no authority that issued the database server's certificate, stops hMailServer from connecting to its database. The same applies in 6.3.4 through 6.3.7 to TlsCaFile when an Oracle MySQL client library has been put in place of the bundled MariaDB Connector/C, since that client opens the file through OpenSSL in the same way; the bundled MariaDB Connector/C opens the file in the code page and is not affected, and neither are the Linux builds. The configuration is not the default: by default no root certificate file is named.

Crypto Server

Progressive Robot hMailServer 6.3.4 through 6.3.7, with a MySQL or MariaDB database and TlsMode=verify-full, does not hand the database client the CA file that TlsCaFile names when the file's name contains a character outside ASCII on Linux, or above U+00FF on Windows, which allows an attacker who can intercept the connection to the database server to read and modify the traffic between hMailServer and its database, by presenting, with MariaDB Connector/C 3.4.2 to 3.4.10 as the client, a certificate from any authority, its own included, for any name, and otherwise a certificate for the database server's name issued by any certificate authority in the system's trust store. The server converted the name for the client with the C runtime's conversion in the C locale, which gives an empty string for such a name, and then set no CA file at all, without an error, while certificate verification stayed on, so the client - MariaDB Connector/C, bundled on Windows and the distribution's on Linux - verified the certificate of a database server over the network against the system's trust store instead of the configured CA; Connector/C 3.4.2 to 3.4.10 (bundled on Windows in 6.3.4 to 6.3.6) went further and, with no CA file, took a certificate within its dates whose issuer it could not find, for any name, with neither its chain nor its name checked and no password proof, when the server offered first a sign-in method that hashes the password, which an attacker in the middle chooses (MariaDB's CONC-853, fixed in Connector/C 3.4.11), and Connector/C 3.4 accepted from a MariaDB 11.4 or later server a certificate the store did not vouch for when that server proved it held the account's password; on a connection it treats as local (127.0.0.1, ::1, a Unix socket, a named pipe, and localhost on Windows), Connector/C 3.4.1 and later checked neither the certificate's issuer nor its name, so that a local attacker able to stand in for the database server could present any certificate within its dates of its own making. The settings line of hmailserver --check-database still named the configured file, and the application log said the certificate had been checked. With MariaDB Connector/C 3.4.1 to 3.4.9 as the client - bundled on Windows in 6.3.4 to 6.3.6, and the client of Linux distributions that have not patched it - the missing CA file also met the precondition of CVE-2026-107819, so that a certificate issued for any other name by a trusted authority was enough to obtain the database password. On Linux the file was found only when the server ran on glibc under a locale whose character set holds the name's characters (a UTF-8 locale, or a legacy 8-bit one the system has, in whose bytes the file is then named); with no locale, LC_ALL=C or a locale the system lacks, and on Alpine (musl), the connection failed instead. The configuration is not the default: TlsMode defaults to prefer, which checks no certificate.

Crypto Server

Progressive Robot hMailServer 6.3.4 through 6.3.7, with a MySQL or MariaDB database, TlsMode=verify-full and no TlsCaFile, does not verify the database server's certificate's issuer or name when the connection is one that MariaDB Connector/C treats as local - Server= set to 127.0.0.1, ::1 or localhost (on Linux a Unix socket), to . on Windows (a named pipe), or to a comma-separated list of servers that holds such an element - which allows a local attacker who can stand in for the database server, for example by listening on its port while it is stopped or restarting, to receive the database sign-in, the password included, and to read and modify the traffic between hMailServer and its database. hMailServer applied verify-full by turning the client's certificate verification on without a CA file, but MariaDB Connector/C 3.4.1 and later, on a connection they treat as local and with no CA file, accept any certificate within its validity period that is self-signed or sent with its own root, for any name (Connector/C 3.4.2 to 3.4.10 also one whose issuer they cannot find), so the client accepted the certificate an impostor made, asked no proof of the password and allowed a switch to an authentication method that sends the password unhashed, while hmailserver --check-database said the certificate had been checked against the system's trust store and the application log that it had been checked. The Windows builds bundle Connector/C 3.4.9 (6.3.4 to 6.3.6) and 3.4.11 (6.3.7); on Linux the distribution's client is used, and Connector/C 3.3 and 3.4.0 and Oracle's MySQL client are not affected. The configuration is not the default: TlsMode defaults to prefer, which checks no certificate.

Crypto Server

Use of a broken or risky cryptographic algorithm in SQL Server allows an unauthorized attacker to disclose information over a network.

Crypto Server

The remote EJB client does not verify that the hostname of the server it connects to matches the server's TLS certificate. An attacker able to intercept network traffic between an EJB client and server can impersonate the server and read or modify the traffic, including credentials and invocation data. Users are recommended to upgrade to version 10.3.0 or 11.0.0-M2, which fix the issue.

Crypto Server

Stateful session bean identifiers are not generated from a cryptographically secure random source. A remote attacker with access to the EJB remote endpoint who holds one valid identifier can derive those of other clients' sessions and invoke methods on their beans, exposing or modifying other users' session state. Users are recommended to upgrade to version 10.3.0 or 11.0.0-M2, which fix the issue.

Crypto Server