Device CVEs.
Published CVEs that affect device software, ranked by exploit odds.
-
CVE-2026-63287
It was possible for an authenticated non-admin user to modify certain data objects without having the appropriate permissions, which could be used to tamper with audit log creation in AXIS Camera Station.
-
CVE-2026-90832
bt_hci_le_per_adv_report_common() in subsys/bluetooth/host/scan.c handles the HCI_LE_Periodic_Advertising_Report (and _v2) event. It verified that the fixed event header was present and that the controller-declared Data_Length fits the tailroom of the periodic-sync reassembly buffer, but never checked that the event actually carried as many data bytes as evt->length claims. Both reassembly paths — DATA_STATUS_PARTIAL, and DATA_STATUS_COMPLETE while a chain is already in progress — then called net_buf_simple_add_mem(&per_adv_sync->reassembly, buf->data, evt->length), copying up to 255 bytes starting past the end of the event's real payload. The Data_Length field originates in the HCI controller, so the flaw is reachable in host-only/split builds where the controller is a separate part reached over H4 UART, SPI, USB or an inter-core IPC transport: a malicious, compromised or buggy controller (or an attacker able to inject on that link) can send a report declaring a length larger than the event payload. The generic event dispatcher in subsys/bluetooth/host/hci_core.c only enforces a per-event minimum length and never cross-checks the subevent's internal length field, so nothing else catches it. Builds using Zephyr's own in-image controller are not affected, because the controller always emits a length matching the bytes it appends. Exploitation additionally requires CONFIG_BT_PER_ADV_SYNC with CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0 (the option defaults to 0, which compiles the reassembly block out; LE Audio broadcast-sink and Public Broadcast Profile applications that reassemble fragmented periodic advertising data set it), and an established periodic advertising sync. The consequence is an out-of-bounds read of adjacent HCI RX-pool memory — including stale contents of previously received HCI events — which is copied into the reassembly buffer and then delivered to every registered bt_le_per_adv_sync_cb.recv listener as if it were received advertising data, so the disclosed memory becomes application-visible and may be forwarded off-device. The write side remains in bounds because the tailroom check uses the same length value, so there is no memory corruption; impact is limited to information disclosure and undefined behaviour on the over-read. The fix drops any report whose declared length exceeds the remaining event payload, matching the guard already present in the extended and legacy advertising report handlers.
-
CVE-2026-120451
libgphoto2 through 2.5.34 contains stack-based and heap-based buffer overflow vulnerabilities in jl2005c_init() that allow malicious USB devices to corrupt memory by supplying an unbounded allocation table entry count. Attackers can connect a spoofed Jeilin JL2005B/C/D camera reporting 1022 or more entries to overwrite the saved return address and heap data, potentially achieving code execution.
-
CVE-2026-86962
A double free issue was addressed with improved memory management. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An app may be able to cause unexpected system termination.
-
CVE-2026-123504
Vikunja from 0.22.0 before 2.7.1 contains an information disclosure vulnerability that allows read-only project members to view full webhook target URLs by listing project webhooks. Attackers can extract incoming-webhook tokens or API keys embedded in target_url values to post to receiving channels or reuse keys until rotated.
-
CVE-2026-115803
A flaw has been found in Scada-LTS 2.8.0. Affected by this vulnerability is the function HttpServletRequest.getParameter of the file AmChartValuesAPI.java of the component AmCharts Data API. Executing a manipulation of the argument ids can lead to authorization bypass. The attack can be executed remotely. The exploit has been published and may be used. The vendor announces: "At this moment we are working on new release with security enhancements which will be introduced to the community soon."
-
CVE-2026-59007
In decode_packed_entry_number of codebook.c, there is a possible out-of-bounds read due to a logic error in the code. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-52786
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, in the official apps/epics client tool on v1.6.0-rc1 (not in the generic BACnet RPM ACK decoder alone) a malicious BACnet/IP endpoint can reply to the EPICS tool’s legitimate ReadPropertyMultiple request with a syntactically valid ReadPropertyMultiple-ACK that contains more heading properties than the tool’s fixed local storage can hold. The response is decoded successfully and later consumed by ProcessRPMData(), which writes property values into a fixed global array using an unbounded linear index. This results in a reproducible global-buffer-overflow in apps/epics/main.c. This is a network-reachable memory corruption in the official epics tool’s response-processing path. The root cause is that apps/epics treats a remotely supplied variable-length RPM property list as if it were a trusted, fixed-size local heading-property set. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.
-
CVE-2026-96453
A flaw was found in the Keycloak Admin CLI kcadm tool, which is used by administrators to manage Keycloak servers from the command line. When a custom truststore is provided to verify the server identity, the tool incorrectly accepts any self-signed certificate as long as the hostname matches. This allows a network attacker to impersonate the Keycloak server, steal administrative credentials, and perform unauthorized management actions.
-
CVE-2026-107359
Improper input validation in the beacon handler for WF200 firmware versions 3.17.0 and earlier may result in a divide-by-zero fault.
-
CVE-2026-82033
DeepSeek Harness prior to 0.1.2-alpha.2, and specifically commit 3e24087, contains a missing authentication vulnerability in its web profile HTTP and WebSocket RPC control plane, allowing any local process, including those running as a different OS user, to reach unauthenticated session methods such as session.create and session.prompt. Attackers can invoke session.prompt to trigger the agent's bash and filesystem tools, achieve arbitrary command execution as the victim user using their configured model credentials, intercept live session traffic and logs over the event mux stream, and bypass human tool-approval checks via POST /api/respond by matching only rpcId, approvalId, and sessionId values broadcast over the ungated stream.
-
CVE-2026-46677
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a client-side out-of-bounds read in the AtomicReadFile-ACK record-access handling path. The issue is caused by a mismatch between a remote returnedRecordCount value and the fixed local fileData[] array capacity in BACNET_ATOMIC_READ_FILE_DATA. The ACK decode path preserves the remote RecordCount, discards storage for excess records without truncating that count, and a downstream sink later iterates over the original RecordCount and indexes fileData[i] out of bounds. This issue has been patched in versions 1.4.4 and 1.5.1.
-
CVE-2026-8372
A vulnerability that could allow an attacker to gain unauthorized access.
-
CVE-2026-20585
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01338165; Issue ID: MSV-9660.
-
CVE-2026-20563
In Modem, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01777997; Issue ID: MSV-8905.
-
CVE-2026-53986
Girafit camera app (Android and iOS) version 1.9.1 and earlier, and Girafit camera devices, contain a hardcoded credentials vulnerability that allows attackers to obtain the shared TURN relay username by decompiling the app or intercepting unencrypted network traffic during live view registration. Attackers can extract the static TURN username and session token, which are identical across all installs and not tied to any user or device, potentially enabling tracking, impersonation, or further exploitation if combined with the TURN relay password.
-
CVE-2026-128907
Missing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI's proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.
-
CVE-2026-113371
Sonatype Nexus Repository 3 returns the signing passphrase of an APT or YUM repository, through an internal REST endpoint, to a user account that holds only the read privilege for administering that repository. The account does not need the privilege to edit the repository.
-
CVE-2026-113372
Sonatype Nexus Repository 3 returns the private signing key of a YUM proxy or group repository to an account that holds only the read privilege for administering that repository. The account does not need the privilege to edit the repository. A party that holds the key can sign repository metadata as that repository.
-
CVE-2026-85033
The AVRCP Target role in subsys/bluetooth/host/classic/avrcp.c keeps its vendor-dependent response transmit state in a per-connection object selected by connection index (get_avrcp_tg()), with the per-transfer context (tid, sent_len, and the BT_AVRCP_TG_FLAG_TX_ONGOING flag) stored in the user_data of the queued response net_buf. The AVCTP teardown handler avrcp_disconnected() did not cancel tg->vd_rsp_tx_work and did not release the buffers still queued on tg->vd_rsp_tx_pending, so a link drop in the middle of a fragmented response left the buffer on the list with TX_ONGOING still set. A remote AVRCP Controller can trigger this deterministically: it issues a vendor-dependent command whose response exceeds one AVRCP fragment (for example GetElementAttributes or GetCapabilities), lets bt_avrcp_tg_vendor_tx_work() emit the START fragment, and then drops the ACL link instead of sending REQUEST_CONTINUING_RESPONSE. The AVCTP control channel requires an encrypted BR/EDR link (BT_SECURITY_L2), so the attacker must be a paired peer within radio range; no user interaction is needed. Because the Target objects are static and reused, the next connection landing on the same connection index finds the stale buffer at the head of vd_rsp_tx_pending. Every run of the TX work sees TX_ONGOING and returns immediately, so all further vendor-dependent responses queue behind the stale head and are never sent — a persistent loss of AVRCP Target function that no timeout clears and only a reboot recovers. Each cycle also leaks one response buffer from a shallow application pool, and a new peer that sends REQUEST_CONTINUING_RESPONSE clears the stale TX_ONGOING via bt_avrcp_tg_process_continuing_cmd(), causing the un-sent remainder of the previous peer's response to be transmitted to it. The fix cancels tg->vd_rsp_tx_work and unrefs every buffer on tg->vd_rsp_tx_pending in avrcp_disconnected(); since the TX context lives in the buffer user_data, releasing the buffers also resets the TX state machine. There is no memory corruption: the pre-fix buffer is leaked with a live reference, so no use-after-free arises.
-
CVE-2026-20560
In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01870543; Issue ID: MSV-9070.
-
CVE-2026-118497
The affected products do not sufficiently validate CODESYS Automation Server TLS certificates when a user starts the certificate enrollment. An unauthenticated remote attacker performing a man-in-the-middle attack can exploit this vulnerability by supplying an untrusted certificate that is accepted as trusted. Successful exploitation may allow an attacker to intercept and manipulate communications between the CODESYS Automation Server and the PLC network.
-
CVE-2025-41725
Affected devices running firmware versions prior to 4.1.0 may crash and become unavailable when receiving specific malformed Bluetooth messages from an unauthenticated attacker.
-
CVE-2026-54146
OpenHuman is an open-source agent harness available as a desktop application and Rust library. From 0.53.15 before 0.57.5 on macOS, core_process.rs in the Tauri desktop process publishes the per-launch OPENHUMAN_CORE_TOKEN bearer credential in its process environment even though the core now runs as an in-process task. Another process running as the same user can read that environment through the macOS KERN_PROCARGS2 process-inspection interface, recover the token together with the local host and port, and authenticate to the core JSON-RPC service with the authority of the desktop frontend. The attacker can read agent memory and integrated-account data, invoke privileged actions, change configuration, and stop or disrupt services without root access, developer mode, or changes to System Integrity Protection. This issue affects Intel and Apple Silicon macOS systems. This issue is fixed in version 0.57.5.
-
CVE-2026-48176
A memory corruption vulnerability caused by improper validation of messages
-
CVE-2026-116632
A malicious web page could insert arbitrary text into the FaceTime call prompt shown by iOS, potentialy allowing it to display a phishing message inside system UI. This vulnerability was fixed in Firefox for iOS 156.1.
-
CVE-2026-21162
Out-of-bounds write in libiosotglib.so prior to version 3.7.73.4 allows physical attackers to execute arbitrary code. User interaction is required for triggering this vulnerability.
-
CVE-2026-48178
Out of bound access in PPC due to race condition in global variable access
-
CVE-2026-121145
This vulnerability exists in the iRA 2.0 and iRA.ev mobile applications due to insufficient validation of URLs and origins loaded within the WebView component. A remote attacker could exploit this vulnerability by sending malicious web content to the affected WebView. Successful exploitation of this vulnerability could allow the attacker to perform unauthorized interaction with application functionality, obtain live bearer authentication tokens and potentially impersonate the associated user and access vehicle related information and services.
-
CVE-2026-20561
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01750090; Issue ID: MSV-8908.
-
CVE-2026-113373
Sonatype Nexus Repository 3 Pro does not check the local account status when a user signs in through a configured SAML or OAuth2/OpenID Connect identity provider. A user whose account was disabled or locked by an administrator in Nexus Repository can sign in again with valid identity provider credentials for the same account, and then receives a new session with the roles of that account. The attacker needs no Nexus Repository session and no Nexus Repository privilege. The attacker needs a named account that holds valid credentials at the identity provider. The anonymous user is not part of this attack path.
-
CVE-2026-87044
The Mbed TLS crypto shim driver in drivers/crypto/crypto_mbedtls_shim.c drives PSA multipart cipher and AEAD operations. In mbedtls_cbc() and mbedtls_aead(), every error path after a successful psa_cipher_encrypt_setup() / psa_aead_decrypt_setup() returned directly without calling psa_cipher_abort() / psa_aead_abort(). Because the abort is the only thing that reaches mbedtls_cipher_free(), each failed operation permanently leaked the heap-allocated mbedtls_aes_context (roughly 288 bytes) that setup had allocated from Mbed TLS's fixed static heap (_mbedtls_heap[CONFIG_MBEDTLS_HEAP_SIZE], default 512 bytes). With CONFIG_PSA_CRYPTO_PROVIDER_TFM the leaked object is instead a finite secure-partition multipart-operation slot. The failure is chosen by an unauthenticated attacker. With CONFIG_NET_L2_IEEE802154_SECURITY backed by this driver, ieee802154_decrypt_auth() in subsys/net/l2/ieee802154/ieee802154_security.c invokes cipher_ccm_op() on every received secured frame, with no authentication ahead of the MIC check. A device in radio range can transmit a stream of syntactically valid 802.15.4 frames carrying a bogus MIC; each one makes psa_aead_verify() fail and leaks a block. The CBC path is reachable the same way through the OSDP secure channel, where CONFIG_OSDP_SC_ENABLED selects this shim and osdp_encrypt() / osdp_decrypt() leave out_buf_max unset, so every operation fails inside psa_cipher_update(). Exhausting the Mbed TLS heap — which the default configuration reaches after a couple of failed operations, and any realistic configuration reaches in well under a second of frames — makes all subsequent mbedtls_calloc() calls fail. Every later cryptographic operation in the image then fails permanently, including link-layer security and any TLS/DTLS sharing the same heap, until the device is rebooted. There is no memory corruption or information disclosure: frames with an invalid MIC are still rejected, so the impact is limited to availability. The fix routes all post-setup failures in mbedtls_cbc() and mbedtls_aead() through a common error: label that calls the matching PSA abort before returning. Setup failures need no change, since the PSA core aborts the operation itself when setup fails.
-
CVE-2026-85036
The Bluetooth Classic AVDTP layer defers releasing a session's stream endpoints: bt_avdtp_l2cap_disconnected() in subsys/bluetooth/host/classic/avdtp.c ends with k_work_submit(&session->_release_work), placing the embedded struct k_work on the system work queue's pending list. When the same struct bt_avdtp object is immediately reused for a new signalling connection, the session memory is re-initialized — a2dp_get_connection() in subsys/bluetooth/host/classic/a2dp.c memset()s the whole struct bt_a2dp, and bt_avdtp_l2cap_accept() / bt_avdtp_connect() call k_work_init() on session->_release_work — while that work item is still linked into k_sys_work_q.pending. Zeroing a linked sys_snode_t truncates the list while its tail pointer keeps pointing past the truncation. The reuse window is deterministic rather than a race. All host RX processing runs on the Bluetooth RX work queue at a cooperative priority (CONFIG_BT_RX_PRIO), while _release_work is submitted to the lower-priority system work queue, so the release handler cannot run until the RX thread blocks. Because l2cap_br_recv() processes every signalling command contained in a single L2CAP signalling PDU back-to-back, a peer can send one PDU holding an L2CAP Disconnection Request for the AVDTP signalling channel followed by a Connection Request for PSM 0x0019; the second command reaches the session-reuse path with the release work provably still queued. The peer must already hold an encrypted AVDTP signalling channel, i.e. be a paired/bonded BR/EDR device. The result is corruption of the global system work queue's pending list: either the queue silently stops executing any work at all (subsequent submissions are appended to a chain the head can no longer reach, and the orphaned items keep their K_WORK_QUEUED flag forever) or, in the tail variant, the list acquires a self-referencing node that the queue thread spins on. The written values are pointers to other struct k_work objects and are not attacker-controlled, so the impact is a device-wide, reboot-required denial of service rather than a controllable write primitive. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_A2DP are affected. The fix is a two-commit unit, and neither commit closes the path on its own. ec822ceed83b adds a pending-release check to bt_avdtp_connect() and bt_avdtp_l2cap_accept(), but the A2DP upper layer's a2dp_get_connection() memset()s the session — including the queued work item's list node and flags — before those checks run, so k_work_busy_get() would observe an already-cleared state. 2bd5ea88c69b closes that by making a2dp_get_connection() itself skip the reuse and return NULL while the release work is still pending, which both callers already handle by rejecting the connection attempt. Apply both commits together; either one alone leaves the device vulnerable.
-
CVE-2026-123051
The REV.exe module distributed with Farmasimplex contains embedded OAuth client credentials for integration with the IZS platform. An attacker with access to the executable could extract and reuse the credentials, potentially leading to unauthorized access to integration resources or manipulation of associated information, depending on the privileges granted and authentication controls in place.
-
CVE-2026-82944
SOEM version 2.0.0 and earlier contains a vulnerability in multi-segment data transfers where a malicious device can overflow memory buffers. The software checks the total size only once at the beginning, but doesn't track the cumulative size as multiple segments arrive. An attacker can declare a small initial size to pass validation, then send additional segments that exceed the allocated buffer. This allows the attacker to write controlled data beyond buffer boundaries, potentially enabling code execution.
-
CVE-2026-82388
bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discovery by passing the object's embedded hf->sdp_param to bt_sdp_discover(). That call links the caller-owned parameter block into the SDP client's request list (session->reqs in subsys/bluetooth/host/classic/sdp.c). If the subsequent bt_rfcomm_dlc_connect() then failed, the affected code wiped the entire object with (void)memset(new_hf, 0, sizeof(*new_hf)) while that discovery was still outstanding, zeroing the sys_snode_t _node that is still linked in the SDP client's list along with the request's func, uuid and pool pointers, and zeroing the hf->slc_work work item that may already be queued on the system workqueue. The discovery could not be retracted instead: bt_sdp_discover_cancel() is declared in include/zephyr/bluetooth/classic/sdp.h but has no implementation. The failing branch is reachable with peer-supplied input. The documented use of bt_hfp_hf_connect() is to pass the RFCOMM channel read out of the remote Audio Gateway's SDP record; neither bt_sdp_get_proto_param() nor bt_hfp_hf_connect() range-checks that value, so a remote device advertising an HFP AG record with an RFCOMM channel outside 1-30 makes bt_rfcomm_dlc_connect() return -EINVAL and drives the local device into the wipe. The same branch is reached without any application misuse when the remote peer controls connection timing, for example when the RFCOMM session is in BT_RFCOMM_STATE_DISCONNECTING or the ACL is dropped between object creation and the RFCOMM call. Once the object has been wiped, the Bluetooth host continues to use it: sdp_client_alloc_buf() dereferences session->param->pool, which is now NULL, and the SDP receive paths call session->param->func() through a null function pointer, neither of which is NULL-checked. Because the wipe also clears hf->acl, the pool slot is considered free and a retry or an incoming HFP connection re-appends the same still-linked list node, turning session->reqs into a self-referential list that the host's list walkers never leave. The result is a fault or an unrecoverable hang in the Bluetooth host thread; the stray indirect call is through an all-zero pointer whose target the attacker does not control, so the practical impact is denial of service. The fix keeps the object allocated and marks it with a new BT_HFP_HF_FLAG_RELEASING flag, letting bt_hfp_hf_discover_cb() release it once the discovery completes instead of destroying it under the SDP client. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_HF enabled are affected.
-
CVE-2026-81039
The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral connection completes, find_pending_connect() in subsys/bluetooth/host/hci_core.c looked that reservation up using only the identity and the peer address, with a directed-then-undirected fallback, and had no knowledge of which advertising set actually terminated. With CONFIG_BT_EXT_ADV_MAX_ADV_SET > 1, where the LE Enhanced Connection Complete event is cached until the LE Advertising Set Terminated event identifies the set, this lookup can return the reservation belonging to a different, still-running advertising set. The defect is reachable over the air by any adjacent device. If an application runs two connectable extended advertising sets on the same identity — one undirected and one directed at a peer P (the common "directed reconnect to a bonded central while still accepting new centrals" pattern) — a remote initiator whose address maps to P connecting on the undirected set causes the directed set's reservation to be consumed instead. The initiator address is chosen freely by the remote device and is not authenticated at link establishment, so no bonding, pairing or prior relationship is required to trigger the mis-attribution. The undirected set's own reservation is then stranded: its BT_ADV_ENABLED flag has already been cleared, and le_adv_stop_free_conn() — the only path that returns a reservation to the pool — is reached only for sets that are still enabled, so bt_le_ext_adv_stop() returns early and the object is never released. Each occurrence permanently consumes one CONFIG_BT_MAX_CONN slot until bt_disable() or reboot. In application patterns that restart the directed advertising set after each disconnect, an attacker can repeat the sequence until the pool is exhausted, after which connectable advertising fails with -ENOMEM and the device can no longer accept connections. As a side effect the directed set keeps advertising without a reservation, so a genuine connection on it is dropped by bt_hci_disconnect(). The impact is availability only; no memory corruption or information disclosure results, and configurations with a single advertising set are unaffected.
-
CVE-2026-123812
Dynatrace MCP Server is an MCP server for Dynatrace Observability. Prior to 1.8.7, the create_dynatrace_notebook registration in src/index.ts performs a persistent document-write action without calling requestHumanApproval, although the project's other write tools use that gate to obtain operator consent. A caller can create tenant-visible notebooks containing attacker-controlled Markdown or DQL content, and tenant users may later execute embedded DQL when opening the notebook. The tool also lacks a destructiveHint annotation that would signal its side effects to MCP clients. This issue is fixed in version 1.8.7.
-
CVE-2026-20555
In Modem, there is a possible out of bounds read due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01876664; Issue ID: MSV-9834.
-
CVE-2026-86990
An access issue was addressed with improved access restrictions. This issue is fixed in iOS 18.7.11 and iPadOS 18.7.11, iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Tahoe 26.7.2, visionOS 27.2. A malicious app may be able to access the camera without user permission.
-
CVE-2026-63243
An authentication vulnerability in the Bluetooth Low Energy (BLE) implementation of Creative Sound Blaster Katana could allow an attacker within Bluetooth range to connect to an affected device without prior pairing or authentication.
-
CVE-2026-109148
In the Aliro access control reference applications of the Nordic Semiconductor nRF Door Lock and Access Control Add-on v1.0.0 through v1.1.1, the stored Access Document record does not retain validFrom and validUntil. The cached public key path (VerifyPublicKey()) and the Kpersistent fast path (_VerifyKPersistentKey()) therefore never re-evaluate the Access Document validity period. An attacker who held a time-limited Aliro credential that was valid when first presented can continue to obtain physical access after the Access Document has expired, for as long as the cached record remains available. Fixed in v1.2.0.
-
CVE-2026-122118
In certain Yealink products before 2026-04-15, when the Wi-Fi AP function is enabled, a default 8-digit numeric PSK with insufficient strength is used. Attackers can exploit this weakness via brute-force attacks to gain unauthorized network access and intercept Wi-Fi traffic.
-
CVE-2026-78116
The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other error branches in the same function, this one did not return. Both completion helpers reach rtio_executor_done() in subsys/rtio/rtio_executor.c, which returns the submission to the pool via rtio_sqe_pool_free() and, for streaming (multishot) submissions, also releases the RX buffer with rtio_release_buffer(). The second completion therefore reads a freed rtio_iodev_sqe, pushes the same mpsc node onto the submission queue while it is already on the pool free list — splicing the two lists together — and re-submits the freed request so the next measurement is written through an already-released buffer. For one-shot submissions it emits a spurious success completion carrying stale userdata and frees the same pool entry twice. The failure branch is driven by sensor conditions rather than by host software. The vendor API documents statuses such as ERROR_ARGUS_BIAS_VOLTAGE_REINIT and ERROR_ARGUS_LASER_MONITOR_INACTIVE as transient results of harsh ambient light, so a party in front of the optical sensor can provoke the invalid-data condition without any physical contact with the board or any software access; SPI transfer errors reach the same branch. In releases before the payload.Status check was dropped, ordinary sharp distance transitions in the sensor's field of view were sufficient. Impact is corruption of the RTIO submission pool and mempool bookkeeping: aliased submissions, writes through released buffers, and duplicate completions delivered to the application. The attacker does not control the corrupted content, so the practical consequence is memory corruption and loss of availability on devices that instantiate brcm,afbr-s50, rather than directed code execution. Only builds that enable this driver are affected.
-
CVE-2026-121689
FrodoBots EarthRover Mini+ firmware (v6.2.4_6.2.5_0.614.0) exposes sensitive credentials through multiple insecure mechanisms. The Wi‑Fi PSK is stored in plaintext in wpa_supplicant.conf and is disclosed through unauthenticated API endpoints and diagnostic exports. Additionally, unauthenticated ADB access allows retrieval of the /etc/shadow file.
-
CVE-2026-68984
In the Samsung Exynos NPU kernel driver, an integer overflow allows an unprivileged application to trigger memory corruption.
-
CVE-2026-35495
In IMS stack, improper handling of SIP packets leads to Incorrect_Access_Control vulnerability
-
CVE-2026-20554
In Modem, there is a possible system crash due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: MOLY01911177; Issue ID: MSV-10122.
-
CVE-2026-18748
The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern. Every later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, &ep->stream->codec_config.codec_ie[0], ep->stream->codec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application's stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read. Reaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec — BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() — because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer. The fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4–253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes.
-
CVE-2026-130804
The microcontroller lacks enabled debug lock bits, leaving the physical Single-Wire (SWS) debugging interface completely unrestricted. This allows an attacker with physical access to use a hardware programmer to dump the entire production firmware.
CVEs that affect device, sorted by how likely they are to be exploited (EPSS).