Device CVEs.
Published CVEs that affect device software, ranked by exploit odds.
-
CVE-2026-62972
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, lighting_command_decode in src/bacnet/lighting.c decodes its first field with the bounded apdu_size - apdu_len, but every nested decode in the operation switch is called with the original full apdu_size while the read pointer has been advanced to &apdu[apdu_len]. The leaf decoders bound their reads against the size they are told, so they read up to apdu_len bytes past the end of the caller's buffer, resulting in an out-of-bounds read. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.
-
CVE-2026-52788
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, the bsc_node_parse_urls() function in src/bacnet/datalink/bsc/bsc-node.c contains three distinct bugs when parsing space-separated WebSocket URIs from a BACnet/SC Address Resolution ACK message. Two bugs cause out-of-bounds writes past the utf8_urls[10][129] array in the static BSC_ADDRESS_RESOLUTION structure. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.
-
CVE-2026-45341
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.0 to before 1.4.4, and 1.5.0 to before 1.5.1, a NULL pointer dereference can be triggered in bacnet_device_object_reference_decode() when a WriteProperty request updates OBJECT_STRUCTURED_VIEW / PROP_SUBORDINATE_LIST. This issue has been patched in versions 1.4.4 and 1.5.1.
-
CVE-2026-118601
Alpine iLX-F511 SSH Hard-Coded Credentials Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine iLX-F511 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SSH service. The issue results from the use of hard-coded credentials. An attacker can leverage this vulnerability to execute code in the context of the telechips user. Was ZDI-CAN-29013.
-
CVE-2026-58265
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a BACnet/SC peer can trigger a heap out-of-bounds read (up to 3 bytes), pre-authentication, in the BACnet/SC header-option decoder. bvlc_sc_decode_proprietary_option() reads the vendor-id and option-type at fixed offsets [3],[4],[5] before checking the option's declared header length, and the option-list validator never enforces a minimum length for proprietary options. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.
-
CVE-2026-46676
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.0 to before 1.4.4, and 1.5.0 to before 1.5.1, an uninitialized value use vulnerability in bacnet-stack's AtomicReadFile record-access ACK encoder allows unauthenticated remote attackers to corrupt the encoded OCTET STRING length and payload boundary in network responses by sending a crafted AtomicReadFile request that reaches a successful record-access path. This issue has been patched in versions 1.4.4 and 1.5.1.
-
CVE-2026-105461
Missing check for ORDERMGR_UPDATE in ordermgr allows user with only ORDERMGR_VIEW permission to update orders. Affected versions before : 24.09.08 Users are recommended to upgrade to version 24.09.08 which fixes this issue.
-
CVE-2026-116105
A weakness has been identified in HeyCyan App 1.0.103 on Android. Affected is an unknown function of the file AndroidManifest.xml of the component Network Security Configuration. Executing a manipulation can lead to cleartext transmission of sensitive information. The attack can be launched remotely. The attack requires a high level of complexity. The exploitability is told to be difficult. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-21155
Out-of-bounds write in bootloader prior to SMR Nov-2026 Release 1 allows physical attackers to write out-of-bounds memory.
-
CVE-2026-67444
Hubleys is a dashboard for self-hosted services. Prior to version 0.5.2, any authenticated (non-admin) Hubleys user can upload a file with an arbitrary extension as their dashboard "background image," and the server will later serve that file back with a Content-Type derived straight from the attacker's chosen extension - so uploading an .html file gets it served as text/html. Because the endpoint that serves it returns a manually-constructed response rather than going through SvelteKit's normal page-rendering pipeline, the app's configured Content-Security-Policy never gets attached to it either, so a script embedded in the upload runs unrestricted. This issue has been patched in version 0.5.2.
-
CVE-2026-89409
In Z-Wave SDK 8.1.1 and earlier (for 700/800 series devices) and 6.85.02 and earlier (for 500 series devices), missing checks in the ZWAVE_CMD_NODES_EXIST handler can result in nodes being removed from the network. These messages must come from a device that has already joined the network.
-
CVE-2026-54374
VitaFit Android application (com.vt.vitafit) before 2.8.1.0 contains a hardcoded credentials vulnerability that allows attackers to extract confidential third-party integration secrets by decompiling the APK. Attackers can retrieve embedded WeChat, Tencent QQ, and Fitbit credentials from the decompiled application to abuse the active third-party application registrations.
-
CVE-2026-118039
In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, an XML external entity reference vulnerability in SVG image processing allows an unauthenticated attacker to read local files on the server via a crafted SVG image with a nested embedded SVG, when the image is processed or exported to PDF.
-
CVE-2026-86046
termux-sync is an open source tool for backing up and restoring a Termux environment across devices. Prior to 1.2.4, termux-sync restore uses the parent directory of the untrusted manifest.json files.*.source value as an extraction destination, and extract_archive calls tarfile.extract on archive members without enforcing a destination boundary. A victim who restores a malicious or tampered backup from local, shared, GitHub, or Google Drive storage can have files written anywhere the Termux user can write, including shell startup files or executable scripts that can lead to code execution when later used. The restore path also accepts unsafe backup_name values for temporary paths, and archive members are not constrained to the intended destination. This issue is fixed in version 1.2.4.
-
CVE-2026-13312
A vulnerability that could allow an attacker to compromise a system.
-
CVE-2026-62662
Pocket ID is an OIDC provider that allows users to authenticate with their passkeys to services. From 1.11.0 until 2.10.0, createTokenFromClientCredentials in backend/internal/service/oidc_service.go accepts the client-controlled resource parameter and embeds it directly in the access token aud claim without validating that the audience is registered or that the requesting client may access it. Any authenticated OIDC client can therefore obtain a Pocket ID-signed token naming another client or an arbitrary audience. The /api/oidc/introspect endpoint cannot distinguish the unauthorized token because it treats a token as active when the introspecting client's identifier matches the attacker-selected audience. In deployments where resource servers trust Pocket ID access tokens for service-to-service authorization, this bypasses audience-based access controls and can permit unauthorized data access or actions; deployments that do not use these tokens for resource-server authorization have no immediate exploitable impact. This issue is fixed in version 2.10.0.
-
CVE-2026-115473
Mongoose is an embedded web server and network library. Prior to 7.22, mg_path_is_sane in src/util.c read path.buf[1] without first requiring path.len to be at least two and read s[2] when only two bytes remained. Unauthenticated remote requests reaching mg_http_upload or mg_http_serve_dir with the affected short path shapes could therefore trigger one-byte heap out-of-bounds reads. On bare-metal or RTOS targets without memory protection, the adjacent byte could be exposed or influence whether a path was accepted, and instrumented builds could crash. This issue is fixed in version 7.22.
-
CVE-2026-100737
Hidden functionality issue exists in Multiple DVRs (Digital Video Recorders) provided by Atsumi Electric Co., Ltd. A user who can log in to the product with the administrator privilege may upgrade the affected product to unauthorized firmware.
-
CVE-2026-62975
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, the RAMFS-backed FILE implementation accepts AtomicWriteFile(record-access) requests that replace existing records with caller-controlled content. If a client replaces a record with shorter data, the backend can shrink the heap allocation and then continue processing with a trailing-copy length derived from the old layout. During that replace path, the RAMFS backend computes the trailing-copy length from the old file layout, then shrinks the heap allocation, and finally uses the stale length in memmove(). As a result, the source range of that memmove() can extend beyond the end of the reallocated heap buffer, producing a heap out-of-bounds read. This issue has been patched in versions 1.5.1 and 1.6.0.
-
CVE-2026-69006
Insufficient validation of length fields in the GNSS firmware loader can result in kernel‑memory corruption.
-
CVE-2026-69025
In the Exynos NPU driver, improper validation of user input in the ioctl handler can lead to an out-of-bounds write, which causes a denial of service
-
CVE-2026-69043
In the Samsung Exynos GPU driver, improper synchronization during buffer object creation and closing can lead to memory corruption
-
CVE-2026-69068
Insufficient length validation in the GNSS firmware loader may lead to corruption of kernel memory.
-
CVE-2026-68985
In the Samsung Exynos NPU driver, improper validation of user input in the ioctl handler can lead to an out-of-bounds write, which causes a denial of service.
-
CVE-2026-48179
In the Exynos modem's IMS stack, improper handling of SDP payload leads to a Denial of Service
-
CVE-2026-48186
Improper handling of messages before AS security activation can cause unexpected behavior
-
CVE-2026-35494
In the baseband, memory corruption during NAS packet processing can cause a denial of service.
-
CVE-2025-66366
Incorrect handling of unauthenticated downlink RRC Setup messages can cause the baseband to crash
-
CVE-2025-66364
Continuously sending control‑plane messages causes the baseband to crashes.
-
CVE-2026-19741
Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning. The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset. The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination. The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit.
-
CVE-2026-116115
A security vulnerability has been detected in Yoosee GM8135S Camera 21.00.01.36. This impacts an unknown function of the file wpa_supplicantX.conf of the component WiFi Configuration. Such manipulation leads to improper initialization. The attack can only be initiated within the local network. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-77058
boneIO Black is vulnerable to Cross-Site Request Forgery (CSRF) on all state-changing API endpoints because it lacks CSRF tokens and does not validate Origin or Referer headers. A remote attacker can craft a malicious webpage that, when visited by a user on the internal network, sends cross-origin requests to the device. This allows the attacker to reboot the controller, toggle relay circuits, control gates and blinds, or shut down the device, causing loss of integrity and availability. Critically, due to CVE-2026-77053 (authentication disabled by default), any user on the same internal network can trigger attacker-controlled actions by visiting the malicious website. This issue was fixed in version 1.6.0.
-
CVE-2026-106018
Authentication bypass using an alternate path or channel vulnerability in Johnson Controls EasyIO FW allows Authentication Bypass. This issue affects EasyIO FW: through 3.0b25.
-
CVE-2026-47258
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-based out-of-bounds write exists in the Notification Class object implementation when handling AddListElement for the recipient-list property. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.
-
CVE-2026-45265
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a stack-based out-of-bounds write / stack-buffer-overflow in bacnet-stack when the server processes a malicious Atomic-Read-File request in record access mode. The bug is triggered on the real server side. A crafted request can set an excessively large RecordCount, which is later used as the loop bound for writing record data into a stack-allocated BACNET_ATOMIC_READ_FILE_DATA data structure. However, the stack object only has space for one fileData element. When the loop reaches i = 1, the code computes &data->fileData[1], which is already out of bounds, and the resulting invalid pointer is passed down to memmove(), causing a stack-buffer-overflow. This issue has been patched in versions 1.4.4 and 1.5.1.
-
CVE-2026-115740
Server side request forgery vulnerability exists in the DLP on-prem extensions version 11.13.1 and earlier allows the file Prefix parameter in the OpenEventEvidenceFile.do endpoint accepts arbitrary UNC paths without validation. The server-side code attempts to open the specified file path, causing Windows to resolve the hostname and initiate SMB authentication to the attacker-controlled host.
-
CVE-2026-123017
GodotSteam 4.17 through 4.23.2 trusts the peer value of 1 to mean that a player is the server. A grant_gold(1000000) call can be forged.
-
CVE-2026-123367
Thor Vector Graphics (ThorVG) is a production-ready vector graphics engine. Prior to 1.1.2, the bundled jpgd JPEG decoder accepts duplicate component selectors in an SOS scan header, causing each duplicate to increase m_blocks_per_mcu without checking the buffers sized from the frame components. A crafted grayscale JPEG can repeat its component in the SOS header, causing decode paths in src/loaders/jpg/tvgJpgd.cpp to write beyond heap buffers sized for one component. The issue is reachable through direct JPEG decoding and through JPEG images embedded in Lottie content, and confirmed impact is memory corruption followed by a process crash. This issue is fixed in version 1.1.2.
-
CVE-2026-129258
A vulnerability was identified in Tenda AC18 15.03.05.05_multi/15.03.05.19 Build 6318. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/upgrade of the component Firmware Upgrade Handler. Such manipulation of the argument upgradeFile leads to insufficient verification of data authenticity. The attack may be launched remotely. The exploit is publicly available and might be used.
-
CVE-2026-86977
An authorization issue was addressed with improved network restrictions. This issue is fixed in iOS 27 and iPadOS 27. An app may be able to initiate calls or send messages.
-
CVE-2026-47259
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a RemoveListElement request targeting Notification-Class.recipient-list can trigger a stack-based out-of-bounds write in the current master branch when the request contains more than NC_MAX_RECIPIENTS valid BACnetDestination elements. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.
-
CVE-2026-47710
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-buffer-overflow can be triggered in the current master branch when a Loop object reads a referenced property through its default timer path and the referenced property is OBJECT_STRUCTURED_VIEW / PROP_DESCRIPTION containing a long attacker-controlled string. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.
-
CVE-2026-49405
OpenHuman is an open-source agent harness available as a desktop application and Rust library. Before 0.56.0, the local server exposes the server-sent events endpoint at /events without bearer authentication, permits cross-origin browser access, and uses only a caller-supplied client_id to select WebChannelEvent objects from the process-wide event bus. An unauthenticated local client, or an attacker-hosted web page opened by the victim, can subscribe to another client's stream by supplying a known or guessed identifier; the fixed system identifier makes the proactive-message stream predictable. The exposed events can include complete assistant responses, streamed message content, tool names, tool arguments, and raw tool outputs intended for the local user interface. This issue is fixed in version 0.56.0.
-
CVE-2026-119712
PipesHub before 0.10.0 contains a server-side request forgery vulnerability in ImageParser._fetch_single_url that allows attackers to make the indexing service fetch internal addresses by embedding image URLs in documents. Attackers can supply Markdown or HTML via uploads, synced mailboxes, or web connectors to reach loopback, private-network, or cloud metadata endpoints, with image responses embedded into indexed content.
-
CVE-2026-94395
A stack-based buffer overflow in Thales SafeNet Authentication Client (SAC) SIS token engine processing can be triggered by a malicious physical or software-emulated smart card. The issue can occur before authentication or PIN entry and may cause a denial of service or potentially arbitrary code execution with the privileges of the affected process. Affected releases start with SAC 10.8 R7 and include SAC 10.9 R3 GA (build 10.9.7449).
-
CVE-2026-77053
boneIO Black firmware ships with authentication disabled by default. Its management web API listens on all network interfaces and exposes all endpoints without requiring credentials. An unauthenticated remote attacker can fully control the device, causing denial of service, modifying configuration, and operating connected physical circuits. This issue was fixed in version 1.6.0: a device without an administrator account refuses API requests until the owner creates one in the first-run wizard, and every API route is restricted to an authenticated role. Versions before 1.2.0 are based on Debian 10, are no longer supported and cannot be upgraded in place; affected devices should be re-flashed with the 1.6.0 system image.
-
CVE-2026-114044
FreeRDP before 3.32.1 contains a heap out-of-bounds read vulnerability in the Android client that allows malicious RDP servers to read beyond surface buffers by supplying unvalidated mappedWidth and mappedHeight values. Attackers can send a crafted RDPGFX_MAP_SURFACE_TO_WINDOW_PDU with oversized dimensions, causing android_UpdateWindowFromSurface to copy heap memory beyond the allocation, leading to crashes or memory disclosure.
-
CVE-2026-62977
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, the BACnet FILE object implementation allows remote WriteProperty(PROP_FILE_SIZE) requests to change the size of a stream-access FILE object without checking whether that FILE is marked Read_Only. When the FILE backend is RAMFS, enlarging the file only performs realloc() and updates the stored size; the newly exposed tail region is not initialized before later reads. As a result, a remote client can enlarge a read-only RAMFS-backed stream-access FILE and then immediately retrieve the newly exposed region with AtomicReadFile(stream-access). Depending on the allocator and build configuration, the returned data may contain sanitizer fill bytes, stale heap contents, or other unintended process memory. Shrinking the file through the same path can also remotely truncate content that was intended to be read-only. This issue has been patched in versions 1.5.1 and 1.6.0.
-
CVE-2026-63651
LiveDocs is a primary-source-first documentation for AI agents. Prior to version 0.7.0, fetch_docs and introspect (kinds openapi/graphql, and resolve_source's docs_url) pass a client-supplied URL straight to URLSession with no scheme or host allowlist, and redirects are followed unconditionally. A prompt-injection payload embedded in fetched documentation can steer the model to call fetch_docs against internal or metadata endpoints and stream the response back into the conversation. This issue has been patched in version 0.7.0.
-
CVE-2026-118790
Multiple hardcoded credentials are embedded within product components and administrative functionalities. These credentials may enable unauthorized access to privileged accounts, services, or application features across affected deployments.
CVEs that affect device, sorted by how likely they are to be exploited (EPSS).