CVE-20XX-?
agent?

Device CVEs.

Published CVEs that affect device software, ranked by exploit odds.

782 CVEs · updated 2026-11-19 00:00 UTC

Reset all
  1. CVE-2026-112678

    A permissions issue was addressed with additional restrictions. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2, watchOS 27.2. An app may be able to access sensitive user data.

    Auth & access Device Apple Ipados

    5.5 MEDIUM 0.2% exploit odds Fix listed
  2. CVE-2026-122328

    SDL_mixer 3.1.2 through 3.2.4 contains a stack-based buffer overflow vulnerability in FetchXLaw() of src/decoder_wav.c when decoding A-law or mu-law WAV files. Attackers can supply a crafted WAV file whose doubly-offset float expansion overwrites about 1 KB of adjacent stack memory, causing crashes or potentially code execution.

    Memory safety Device

    8.5 HIGH 0.2% exploit odds Fix listed
  3. CVE-2026-108910

    IBM Db2 Genius Hub 1.1.2, 1.1.3, 1.1.4, 1.1.5 could allow a remote authenticated attacker to obtain sensitive information due to missing required cryptographic step.

    Crypto Device IBM Agentics

    4.3 MEDIUM 0.2% exploit odds Fix listed
  4. CVE-2026-78117

    The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A remote peer that generates Bluetooth traffic concurrently with the device's own transmissions raises the collision rate. When two senders interleave, the semaphore holder can hand the controller a descriptor whose dataLength comes from one net_buf and whose data pointer comes from another — or one whose buffer has already been returned to its pool. The controller then copies and transmits up to a full HCI/ACL payload starting at a shorter or recycled buffer, disclosing adjacent RAM contents to the connected peer; other interleavings duplicate one HCI packet and silently drop another, disrupting the link. The driver only reads through the shared descriptor, so no memory corruption or write primitive results, and the disclosed bytes are not attacker-chosen. The fix makes the descriptor a local variable in psoc6_bless_send(), removing the shared state; Cy_BLE_SoftHciSendAppPkt() copies the packet before returning, so it need not outlive the call.

    Other Device

    4.2 MEDIUM 0.2% exploit odds Fix listed
  5. CVE-2026-86944

    An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.7 and iPadOS 26.7, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to cause unexpected system termination.

    Memory safety Device Apple Ipados

    5.5 MEDIUM 0.2% exploit odds Fix listed
  6. CVE-2026-93672

    bt_att_find_req_by_user_data() in subsys/bluetooth/host/att.c walks every ATT channel attached to a connection and dereferences chan->req->user_data without checking chan->req. An ATT channel with no client request in flight holds chan->req == NULL — that is its normal idle state, set by att_handle_rsp() when a response resolves the transaction and tested by att_req_send_process() to pick a free channel — so the lookup reads through a NULL pointer as soon as it visits an idle channel. Every other chan->req user in the file already guards the pointer. The lookup is reached from the public bt_gatt_cancel() API and, more importantly, from the host itself: bt_gatt_unsubscribe() calls bt_gatt_cancel() while a subscribe CCC write is still outstanding (BT_GATT_SUBSCRIBE_FLAG_WRITE_PENDING), and call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c invokes bt_gatt_unsubscribe() from the RX path whenever an application notify callback returns BT_GATT_ITER_STOP. A malicious or malfunctioning peer can hold the trigger window open by withholding the ATT Write Response to the CCC write and then sending a notification for the subscribed handle. With CONFIG_BT_EATT the traversal is very likely to meet an idle sibling channel, since ATT channels are prepended to the list and a channel opened after the pending request was sent is visited first. The dereference is a read of a small constant offset from address zero, so the impact is availability only: no memory corruption, no attacker-chosen address and no information disclosure. On platforms and configurations where a near-NULL read traps — TrustZone non-secure images, MMU targets, native_sim, or builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU/_DWT — the fault occurs in the Bluetooth RX context and results in a fatal error and device reset. On a plain Cortex-M build with the vector table mapped at address 0 and null-pointer detection disabled (the default) the read succeeds and the defect is inert. The fix adds an explicit chan->req != NULL test to the channel traversal and additionally rejects a NULL user_data argument, which would otherwise have matched, and cancelled, an unrelated request.

    Memory safety Device

    5.3 MEDIUM 0.2% exploit odds Fix listed
  7. CVE-2026-62268

    borgbackup is an opensource, deduplicating archiver with compression and authenticated encryption. Prior to 1.4.5 and 2.0.0b22, extracting a malicious archive can follow a symlinked parent path or resolve embedded dot-dot path components and delete or overwrite files outside the extraction directory. A crafted slave hardlink can also use an attacker-controlled hardlink source outside the extraction directory and hard-link that file into the restored tree, disclosing its contents. Creating the malicious archive requires repository access and, for encrypted or authenticated repositories, the Borg key and passphrase; a victim must then extract the archive. This issue is fixed in versions 1.4.5 and 2.0.0b22.

    Other Device

    5.3 MEDIUM 0.2% exploit odds Fix listed
  8. CVE-2026-86920

    An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27. An app may be able to access sensitive user data.

    Auth & access Device Apple Iphone Os

    5.5 MEDIUM 0.2% exploit odds Fix listed
  9. CVE-2026-65397

    An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. An app may be able to access sensitive user data.

    Auth & access Device Apple Ipados

    5.5 MEDIUM 0.2% exploit odds Fix listed
  10. CVE-2026-112559

    An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2, watchOS 27.2. An app may be able to access sensitive user data.

    Auth & access Device Apple Ipados

    5.5 MEDIUM 0.2% exploit odds Fix listed
  11. CVE-2026-55981

    A firmware verification vulnerability in Creative Sound Blaster Katana could allow an attacker to modify a legitimate firmware image and upload the modified firmware to an affected device.

    Other Device

    9.6 CRITICAL 0.2% exploit odds No fix listed
  12. CVE-2026-118631

    Philips Hue Bridge Pro Argument Injection Restricted File Write Vulnerability. This vulnerability allows local attackers to modify files on affected installations of Philips Hue Bridge Pro. An attacker must first obtain the ability to execute low-privileged code within a container on the target system, in order to exploit this vulnerability. The specific flaw exists within the factory data service, which listens on TCP port 5001 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to modify files in the context of the service account. Was ZDI-CAN-33090.

    Injection Device

    3.8 LOW 0.2% exploit odds No fix listed
  13. CVE-2026-92704

    SharpEmu is an experimental PlayStation 5 emulator for Windows and Linux. In version 0.0.3-release.3 and earlier, the repository-provided debugger frontend tooling is vulnerable while running. This tooling is not included in the release archives. The frontend exposes an HTTP API on 127.0.0.1:8765 without authentication or CSRF token. Its  do_POST  handler in  tools/SharpEmu.DebuggerFrontend/debugger_frontend.py  does not validate the Origin, Referer, Sec-Fetch-Site, or Host headers. The  _read_json_body()  function also accepts JSON sent with browser-simple content types instead of requiring  application/json . A malicious page that can reach the loopback listener can send cross-origin requests to  /api/launch ,  /api/command , and  /api/connect . Chromium may require Local Network Access permission for pages served from public origins. Local-origin pages and other delivery paths are not consistently subject to this restriction. The  /api/launch  endpoint accepts an attacker-selected  emulatorPath  if it points to an existing file on the victim’s host. On POSIX systems, that file must also be executable. The endpoint additionally requires an existing  ebootPath . The  /api/command  endpoint exposes debugger operations, including  write-memory ,  set-register , and  continue . The  /api/connect  endpoint can initiate outbound TCP connections. These operations can let an attacker execute an existing binary with the victim’s privileges, control the attached emulated process, or reach network services accessible from the host. DNS rebinding can additionally let the attacker read API responses interactively. This issue is fixed in version 0.0.3-release.3-patch.1

    Auth & access Device

    8.3 HIGH 0.2% exploit odds Fix listed
  14. CVE-2026-112687

    This issue was addressed by removing the vulnerable code. This issue is fixed in iOS 27.2 and iPadOS 27.2, tvOS 27.2. An attacker on the local network may be able to cause unexpected system termination or corrupt process memory.

    Memory safety Device Apple Ipados

    5.5 MEDIUM 0.2% exploit odds Fix listed
  15. CVE-2026-112692

    This issue was addressed with additional entitlement checks. This issue is fixed in iOS 27.2 and iPadOS 27.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. An app may be able to access sensitive user data.

    Auth & access Device Apple Ipados

    5.5 MEDIUM 0.2% exploit odds Fix listed
  16. CVE-2026-21169

    Improper input validation in Smart Switch prior to version 3.7.74.1 allows adjacent attackers to install arbitrary applications. User interaction is required for triggering this vulnerability.

    Other Device

    5.3 MEDIUM 0.2% exploit odds No fix listed
  17. CVE-2026-119055

    CWE- 416: Use After Free vulnerability exists that could cause arbitrary code execution when a local attacker could trick the end user to open a specially crafted malicious SSD file.

    Memory safety Device

    4.6 MEDIUM 0.2% exploit odds No fix listed
  18. CVE-2026-118785

    Improper handling of non-secure-world input in NSC veneer functions of NXP MCUXpresso SDK TrustZone-M examples (trustzone_examples), affecting versions through 26.06.00-lts and 26.09.00-pvw2, may allow a non-secure caller to supply unvalidated pointers or untrusted data, causing a timing side-channel, TOCTOU condition, or format-string misuse, potentially resulting in secure-world memory disclosure or denial of service. All software versions starting from 26.06.01-lts and 26.09.00 have fixed this issue.

    Denial of service Device

    6.7 MEDIUM 0.2% exploit odds No fix listed
  19. CVE-2026-112660

    An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. An app may be able to bypass certain Privacy preferences.

    Auth & access Device Apple Ipados

    3.3 LOW 0.2% exploit odds Fix listed
  20. CVE-2026-124038

    An uncontrolled XML entity expansion vulnerability in the Flock Installer app for Android before version 2.35.0 allows an attacker who has a valid technician account and controls or impersonates the camera being set up to crash the app, on devices running Android 10, 11 or 12, by returning a camera configuration response that contains nested XML entity declarations. The vulnerability does not allow the attacker to read or change data on the device, and no customer license plate, video or location data is exposed. Android 13 and later reject the response. The issue is fixed in version 2.35.0; update to 2.35.0 or later.

    Denial of service Device

    1.0 LOW 0.2% exploit odds Fix listed
  21. CVE-2026-123996

    Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains a missing authentication vulnerability in the UPnP/DLNA RenderingControl service on TCP port 38400 that allows a LAN-adjacent attacker to issue SetVolume, SetMute, and SelectPreset(FactoryDefaults) commands after a one-time DLNA pairing with no per-command authentication or session token. Attackers can send a continuous loop of unauthenticated commands to override the physical remote, change volume and mute, and reset all picture and audio calibration settings.

    Auth & access Device

    4.8 MEDIUM 0.2% exploit odds No fix listed
  22. CVE-2026-20566

    In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, if a malicious actor has already obtained the System privilege. User interaction is needed for exploitation. Patch ID: MOLY01923663 / ALPS11315955; Issue ID: MSV-10866.

    Memory safety Device Mediatek mt2716 Firmware

    4.8 MEDIUM 0.2% exploit odds Fix listed
  23. CVE-2025-53697

    Use of default credentials vulnerability in Johnson Controls iSTAR Ultra, Johnson Controls iSTAR Ultra SE, Johnson Controls iSTAR Ultra G2, Johnson Controls iSTAR Ultra G2 SE, and Johnson Controls iSTAR Edge G2 allows CAPEC‑560: Use of Default Credentials. This issue affects iSTAR Ultra: before 2.9.2.CU02; iSTAR Ultra SE: before 6.9.2.CU02; iSTAR Ultra G2: before 6.9.2.CU02; iSTAR Ultra G2 SE: before 6.9.2.CU02; iSTAR Edge G2: before 6.9.2.CU02.

    Auth & access Device

    8.4 HIGH 0.2% exploit odds No fix listed
  24. CVE-2026-122144

    A security flaw has been discovered in nliautaud pico-content-editor up to 02d5ad6c820c5050c542ab9505819b5e0a0ba1af. This vulnerability affects unknown code. The manipulation results in cross-site request forgery. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.

    Auth & access Device

    2.1 LOW 0.2% exploit odds No fix listed
  25. CVE-2026-86987

    An authorization issue was addressed with improved entitlement checks. This issue is fixed in iOS 27.2 and iPadOS 27.2. A remote attacker may be able to access sensitive user data.

    Auth & access Device Apple Ipados

    5.5 MEDIUM 0.2% exploit odds Fix listed
  26. CVE-2026-112616

    An authorization issue was addressed with improved access control. This issue is fixed in iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, visionOS 27.2. An app may be able to access sensitive user data.

    Auth & access Device Apple Ipados

    5.5 MEDIUM 0.2% exploit odds Fix listed
  27. CVE-2026-114353

    Hidden functionality (undocumented backdoor) in the root-privileged 'assistant' daemon in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a physically-present attacker with USB access to execute arbitrary OS commands as root by sending the hard-coded magic string 'dji26656677' to the USB-gadget serial interface (/dev/ttyGS0), after which each subsequent line is passed to system().

    Code execution Device

    7.0 HIGH 0.2% exploit odds No fix listed
  28. CVE-2026-21172

    Incomplete cleanup in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to establish an unauthorized connection.

    Other Device

    6.0 MEDIUM 0.2% exploit odds No fix listed
  29. CVE-2026-21170

    Improper enforcement of behavioral workflow in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to write arbitrary files with Smart Switch privilege.

    Other Device

    6.1 MEDIUM 0.2% exploit odds No fix listed
  30. CVE-2026-12963

    A vulnerability that could allow a viewer account to gain unauthorized access to network attached storage devices on the server.

    Auth & access Device

    7.4 HIGH 0.2% exploit odds No fix listed
  31. CVE-2026-12964

    A vulnerability allowing for privileged escalation of the viewer account to gain administrator privileges.

    Disclosure Device

    8.0 HIGH 0.2% exploit odds No fix listed
  32. CVE-2026-111492

    SQL injection in the push notification handler of the MatchPoint Android app, which processes messages from Firebase Cloud Messaging and constructs queries by concatenating untrusted data. An attacker capable of interacting with the component could manipulate queries and access sensitive information from the local database, including credentials stored in the versions described in the report. The scope of the injection is limited to the device.

    Injection Device

    8.6 HIGH 0.2% exploit odds No fix listed
  33. CVE-2026-118608

    Alpine iLX-F511 libanwbtstack.so prh_rfcomm_cc_process_test Out-Of-Bounds Read Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of Alpine iLX-F511 devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability. The specific flaw exists within the prh_rfcomm_cc_process_test function. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-29018.

    Memory safety Device

    3.5 LOW 0.2% exploit odds No fix listed
  34. CVE-2026-21175

    Incorrect permission assignment for critical resource in Samsung Update prior to version 3.0.111.0 allows local attackers to execute arbitrary code.

    Code execution Device

    8.6 HIGH 0.2% exploit odds No fix listed
  35. CVE-2026-85068

    Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. From 2.4.2 through 2.8.5, ippon_command in drivers/blazer_usb.c partially initializes char tmp[64] with a short Megatec status query and then passes a fixed eight-byte chunk to usb_control_msg. A malicious firmware-controlled USB device presenting the Mustek Powermust VID 0x06da and Mustek Powermust PID 0x0003 matches blazer_usb_id, selects ippon_subdriver, and can receive the uninitialized trailing stack bytes during normal polling. The disclosure is bounded and read-only, requires physical or supply-chain access to the USB bus, and has no established integrity or availability impact. This issue is scheduled to be fixed in version 2.8.6.

    Other Device

    2.4 LOW 0.2% exploit odds Fix listed
  36. CVE-2026-54375

    VitaFit Android application (com.vt.vitafit) before 2.8.1.0 contains an insecure session management vulnerability that allows attackers to extract or intercept unencrypted m_session_id tokens stored in application backups, which remain valid for ten years. Attackers can use a stolen session token to read and modify the victim's account or delete the account's authentication record, preventing the legitimate owner from logging in again.

    Disclosure Device

    8.6 HIGH 0.2% exploit odds No fix listed
  37. CVE-2026-112618

    An access issue was addressed with improved access restrictions. This issue is fixed in iOS 27.2 and iPadOS 27.2, visionOS 27.2. An app may be able to access sensitive user data.

    Auth & access Device Apple Ipados

    5.5 MEDIUM 0.2% exploit odds Fix listed
  38. CVE-2026-21152

    Improper input validation in libMyFilterPlugin.camera.samsung.so prior to SMR Nov-2026 Release 1 allows local attackers to potentially execute arbitrary code. User interaction is required for triggering this vulnerability.

    Code execution Device

    7.0 HIGH 0.1% exploit odds No fix listed
  39. CVE-2026-108387

    radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.2, attacker-controlled data from several binary format plugins could reach RBinInfo->bclass. Opening or analyzing a crafted Pebble or Sega Mega Drive binary could place a dbg:// URI in bclass, causing radare2 to reopen the input through the debug input/output plugin and ultimately pass attacker-controlled arguments to execvp(). This could execute commands with the privileges of the radare2 process without an explicit debugging command. This issue is fixed in version 6.2.2.

    Injection Device

    8.5 HIGH 0.1% exploit odds Fix listed
  40. CVE-2026-112547

    A type confusion issue was addressed with improved checks. This issue is fixed in iOS 27.2 and iPadOS 27.2. An app may be able to access sensitive user data.

    Other Device Apple Ipados

    5.5 MEDIUM 0.1% exploit odds Fix listed
  41. CVE-2026-91386

    Vulnerability in the JD Edwards EnterpriseOne Orchestrator product of Oracle JD Edwards (component: E1 IOT Orchestrator Security). Supported versions that are affected are 9.2.0.0-9.2.26.5. Difficult to exploit vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the JD Edwards EnterpriseOne Orchestrator executes to compromise JD Edwards EnterpriseOne Orchestrator. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all JD Edwards EnterpriseOne Orchestrator accessible data as well as unauthorized access to critical data or complete access to all JD Edwards EnterpriseOne Orchestrator accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N).

    Auth & access Device

    6.8 MEDIUM 0.1% exploit odds No fix listed
  42. CVE-2026-21149

    Improper access control in StatusBarManagerService prior to SMR Nov-2026 Release 1 allows local attackers to use the privileged APIs.

    Other Device

    6.9 MEDIUM 0.1% exploit odds No fix listed
  43. CVE-2026-21150

    Improper access control in edmnativehelper prior to SMR Nov-2026 Release 1 allows local attackers to access sensitive information.

    Other Device

    5.1 MEDIUM 0.1% exploit odds No fix listed
  44. CVE-2026-21141

    Improper access control in Samsung Dialer prior to SMR Nov-2026 Release 1 allows local attackers to access sensitive information.

    Other Device

    6.9 MEDIUM 0.1% exploit odds No fix listed
  45. CVE-2026-21142

    Incorrect default permissions in Samsung Contacts prior to SMR Nov-2026 Release 1 allows local attackers to access profile configuration.

    Other Device

    2.1 LOW 0.1% exploit odds No fix listed
  46. CVE-2026-101174

    DoS vulnerability in the DSoftBus module. Impact: Successful exploitation of this vulnerability may affect availability.

    Denial of service Device

    5.7 MEDIUM 0.1% exploit odds No fix listed
  47. CVE-2026-81038

    The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer. The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_command_decode() accepts the Calculate Checksum op code unconditionally (it is not guarded by CONFIG_BT_OTS_OACP_CHECKSUM_SUPPORT), builds without checksum support are reachable too: they answer BT_GATT_OTS_OACP_RES_OPCODE_NOT_SUP and take the same bad path. On builds with CONFIG_ASSERT enabled, the zero-length pull trips the assertion inside net_buf_simple_pull_mem() and panics the device, giving a remotely triggered denial of service. On builds with assertions disabled there is no check: the pull returns the untouched stack array and four bytes of uninitialized stack memory are copied into the indication and transmitted to the peer, repeatable on every request. The disclosure is bounded to four bytes per request and the write stays inside the seven-byte res indication buffer, so there is no memory corruption; the impact is uninitialized-memory disclosure plus an availability loss in assertion-enabled configurations.

    Memory safety Device

    7.1 HIGH 0.1% exploit odds Fix listed
  48. CVE-2026-34484

    Nokia 1830 Global Express GX is vulnerable to a local privilege escalation vulnerability which exists in the administrative shell interface. An authenticated local attacker with restricted shell access can exploit this vulnerability to bypass local security restrictions and gain root access on the device.

    Auth & access Device

    6.7 MEDIUM 0.1% exploit odds No fix listed
  49. CVE-2026-86955

    An authorization issue was addressed with improved state management. This issue is fixed in iOS 27 and iPadOS 27. An app may be able to access sensitive user data.

    Auth & access Device Apple Ipados

    5.5 MEDIUM 0.1% exploit odds Fix listed
  50. CVE-2026-86921

    A permissions issue was addressed with improved validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, visionOS 27. A local attacker may be able to overwrite restricted files.

    Auth & access Device Apple Ipados

    6.2 MEDIUM 0.1% exploit odds Fix listed

CVEs that affect device, sorted by how likely they are to be exploited (EPSS).