The internet is broken right now.
66 critical CVEs without a fix in the last 48 hours. Somewhere a staging server is public. It always is. 146 more already have a fix that someone still has to apply.
-
CVE-2026-129306
libspdm is a sample implementation that follows the DMTF SPDM specifications. Prior to 3.8.3 and 4.0.0-rc2, libspdm_x509_verify_cert_chain() in os_stub/cryptlib_openssl/pk/x509.c and os_stub/cryptlib_mbedtls/pk/x509.c validates certificate signatures one link at a time instead of validating the complete X.509 path. In deployments using a pinned root with a constrained multi-tier PKI, an attacker holding a valid issuer credential below a constrained CA can present a subordinate certificate that exceeds pathLenConstraint or nameConstraints and may be accepted for SPDM identity validation. Exploitation requires the application to use libspdm's backend validation without an additional certificate-chain validation mechanism, the pinned root cannot be substituted, and the deployment's measurement policy must allow identity impersonation alone to satisfy its acceptance requirements. The mbedTLS backend remains unable to enforce nameConstraints because upstream mbedTLS does not implement that check. The full-chain validation changes are released in versions 3.8.3 and 4.0.0-rc2.
-
CVE-2026-99294
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fwd_netdev: use recursion counter in neigh egress path nft_fwd_neigh can be used in egress chains (NF_NETDEV_EGRESS). When the forwarding rule targets the same device or two devices forward to each other, neigh_xmit() triggers dev_queue_xmit() which re-enters nf_hook_egress(), causing infinite recursion and stack overflow. Move the nf_get_nf_dup_skb_recursion() accessor and NF_RECURSION_LIMIT to the shared header nf_dup_netdev.h as a static inline, so that nft_fwd_netdev can use the recursion counter directly without exported function call overhead. Guard neigh_xmit() with the same recursion limit already used in nf_do_netdev_egress(). [ Updated to cache the nf_get_nf_dup_skb_recursion pointer. --pablo ]
-
CVE-2026-99291
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix SMB2 CREATE response buffer overflow smb2_allocate_rsp_buf() uses the MAX_CIFS_SMALL_BUFFER_SIZE (448-byte) buffer for a single SMB2_CREATE response. That buffer also holds a 4-byte length field, which only leaves 444 bytes for the SMB2 body. The AAPL response made this buffer too small. After 8f1b796ff113, a request with AAPL response contexts may need at least 456 bytes. In the 456-byte case, create_aapl_rsp_buf() is appended last, clears 128 bytes, and writes 12 bytes past the allocation. KASAN reports: BUG: KASAN: slab-out-of-bounds in create_aapl_rsp_buf+0x31/0x6e0 Write of size 128 at addr ffff88800370954c by task kworker/0:0/9 ... create_aapl_rsp_buf+0x31/0x6e0 smb2_open+0x58f9/0xef10 ... smb2_allocate_rsp_buf+0x19d/0x370 ... The buggy address is located 332 bytes inside of allocated 448-byte region [ffff888003709400, ffff8880037095c0) Reserve enough space for any fixed CREATE response KSMBD can build. Store the required allocation size in the per-dialect values table. This keeps the small buffer for other commands and avoids using the max transaction buffer for every CREATE.
-
CVE-2024-36344
Insufficient parameter sanitization in AMD Secure Processor (ASP) TEE DrvSys could allow an attacker with local access to the Trusted Execution Environment (TEE) interface or Trusted Application (TA) to cause an out-of-bounds write, potentially resulting in a loss of platform integrity or denial of service.
-
CVE-2026-127339
Vulnerability in the Oracle AutoVue product of Oracle Supply Chain (component: Security). The supported version that is affected is 21.1.0. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle AutoVue executes to compromise Oracle AutoVue. While the vulnerability is in Oracle AutoVue, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle AutoVue accessible data. CVSS 3.1 Base Score 7.1 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:N/I:H/A:N).
-
CVE-2026-93672
bt_att_find_req_by_user_data() in subsys/bluetooth/host/att.c walks every ATT channel attached to a connection and dereferences chan->req->user_data without checking chan->req. An ATT channel with no client request in flight holds chan->req == NULL — that is its normal idle state, set by att_handle_rsp() when a response resolves the transaction and tested by att_req_send_process() to pick a free channel — so the lookup reads through a NULL pointer as soon as it visits an idle channel. Every other chan->req user in the file already guards the pointer. The lookup is reached from the public bt_gatt_cancel() API and, more importantly, from the host itself: bt_gatt_unsubscribe() calls bt_gatt_cancel() while a subscribe CCC write is still outstanding (BT_GATT_SUBSCRIBE_FLAG_WRITE_PENDING), and call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c invokes bt_gatt_unsubscribe() from the RX path whenever an application notify callback returns BT_GATT_ITER_STOP. A malicious or malfunctioning peer can hold the trigger window open by withholding the ATT Write Response to the CCC write and then sending a notification for the subscribed handle. With CONFIG_BT_EATT the traversal is very likely to meet an idle sibling channel, since ATT channels are prepended to the list and a channel opened after the pending request was sent is visited first. The dereference is a read of a small constant offset from address zero, so the impact is availability only: no memory corruption, no attacker-chosen address and no information disclosure. On platforms and configurations where a near-NULL read traps — TrustZone non-secure images, MMU targets, native_sim, or builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU/_DWT — the fault occurs in the Bluetooth RX context and results in a fatal error and device reset. On a plain Cortex-M build with the vector table mapped at address 0 and null-pointer detection disabled (the default) the read succeeds and the defect is inert. The fix adds an explicit chan->req != NULL test to the channel traversal and additionally rejects a NULL user_data argument, which would otherwise have matched, and cancelled, an unrelated request.
-
CVE-2026-77597
iSponsorBlockTV is a SponsorBlock client for YouTube TV clients. Prior to 2.11.0, src/iSponsorBlockTV/dial_client.py trusts the SSDP LOCATION URL supplied by a local-network responder without validating its destination. During automatic discovery, this can cause an attacker-directed GET request and a constrained POST request to a path ending in /YouTube; the POST uses application-defined headers and an application-defined payload rather than attacker-selected request contents. The requests can reach internal services, but the detailed request behavior states that response data and errors are not returned to the attacker, making the demonstrated behavior blind SSRF with bounded integrity impact. This issue is fixed in version 2.11.0.
-
CVE-2026-97894
LibreOffice Calc can open spreadsheets in the DIF format, and text files such as CSV in the UTF-16 encoding. Both are read one line at a time. An out-of-bounds read existed when a line of a crafted file was read, because the length of the line could be miscalculated, so memory beyond the line could be copied into the imported document. In fixed versions each line is read up to its limit and no further.
-
CVE-2026-98100
LibreOffice can import documents in the HWP format, including pictures that link to an external file. An out-of-bounds read existed when the link target of a crafted picture was read, so memory past the picture data could end up in the converted document. In fixed versions the link target is taken only from the picture data.
-
CVE-2026-97892
LibreOffice checks the digital signatures of a PDF document when the document is opened, and shows whether each signature is valid. An out-of-bounds write existed when a signature was checked, because the parts of the file that a crafted signature claims to cover were not checked against the size of the file. In fixed versions a signature that claims to cover anything outside the file is reported as not valid.
-
CVE-2026-108169
LibreOffice can open a web query file (.iqy), which names a web page to import into a spreadsheet, when the file is given on its command line, for example when a file manager or another program opens the file with LibreOffice. The address in such a file was used without the checks that apply to an address given on the command line directly, so a crafted file could make LibreOffice do something other than open a web page, up to running code. In fixed versions only an http or https address is taken from a web query file.
-
CVE-2026-101929
LibreOffice documents can contain Basic macro libraries. A library protected by a password is stored in the document in a compiled form, which may be read when the document is loaded. When a value in the compiled form used an older record format, it could be read as a different type from the one the existing value held, which corrupted memory. In fixed versions the existing value is cleared before a value in the older format is read.
-
CVE-2026-101933
LibreOffice documents can contain Basic macro libraries. A library protected by a password is stored in the document in a compiled form, which may be read when the document is loaded. An out-of-bounds write existed when the compiled form was read, because the positions of its strings were not checked against the size of the data they refer to, and a type found by name was not checked to be of the right kind. In fixed versions these positions are checked, a library that fails the check is not loaded, and a type of the wrong kind is ignored.
-
CVE-2026-106535
libvisio is a library that reads drawings in the VSD and VSDX formats. LibreOffice and other applications use it to import such drawings. An out-of-bounds write existed when a crafted VSDX file contained a malformed path from one part of the drawing to another. In fixed versions a malformed path is handled without writing outside its data.
-
CVE-2026-109904
A buffer overread caused by an integer-overflow in Proc/SProcXResQueryClientIds in X.Org xwayland before 24.1.15 and X Server before 21.1.26 could be used by attackers on authenticated X clients to crash the server or leak out information.
-
CVE-2026-126367
@grpc/grpc-js implements the core functionality of gRPC purely in JavaScript, without a C++ addon. Before 1.13.2, and from 1.14.0 through 1.14.1, the @grpc/grpc-js-xds SafeRegexValueMatcher and PathSafeRegexValueMatcher add start and end anchors without grouping a supplied top-level alternation. An expression intended to match one of several complete values can therefore match a prefix, substring, or suffix. The affected matchers are used for route selection, xDS credential identity matching, and RBAC URL path, principal name, server name, and header rules. An ALLOW policy using an alternation can consequently accept a method, certificate identity, or header value outside the intended set, while a DENY policy becomes broader rather than permissive. This issue is fixed in versions 1.13.2 and 1.14.2.
-
CVE-2026-124705
In Progress® Telerik® UI for .NET MAUI prior to version 16.0.0, an untrusted URL redirection vulnerability in the RadRichTextEditor hyperlink handling and the RadPdfViewer link annotation handling allows an unauthenticated attacker to launch arbitrary operating system protocol handlers with attacker-controlled arguments via a crafted document or PDF link with a non-allowlisted URI scheme that the user opens.
-
CVE-2026-100981
NVIDIA OpenShell for Linux contains a vulnerability in its layer-7 REST proxy where a sandboxed actor could bypass the proxy's policy enforcement by sending a request whose body framing is interpreted differently by the proxy and the upstream server, allowing a second request to be smuggled past policy checks. A successful exploit of this vulnerability might lead to data tampering and information disclosure.
-
CVE-2026-97999
LibreOffice Base documents can hold an embedded HSQLDB database. When the experimental features option is enabled, LibreOffice offers to migrate such a database to the embedded Firebird engine when the document is opened. A heap buffer overflow existed when binary values were copied during the migration, because a value could be longer than the space set aside for its column. In fixed versions that space is enlarged whenever a value is longer than its column.
-
CVE-2026-21169
Improper input validation in Smart Switch prior to version 3.7.74.1 allows adjacent attackers to install arbitrary applications. User interaction is required for triggering this vulnerability.
-
CVE-2026-99309
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check in build_sec_desc() When the large dacl_offset is provided, dacl_offset + sizeof(struct smb_acl) overflows on 32-bit builds and the check is passed, Which makes le16_to_cpu(ppdacl_ptr->size) read out-of-bounds. This only happens for dacl_offset in range [0xFFFFFFF8, 0xFFFFFFFF]. So the oob read is max 8 bytes preceding the allocated ppntsd. unsigned int dacl_offset = le32_to_cpu(ppntsd->dacloffset); int ppdacl_size, ntacl_size = ppntsd_size - dacl_offset; if (!dacl_offset || (dacl_offset + sizeof(struct smb_acl) > ppntsd_size)) goto out; Commit beff0bc9d69b ("ksmbd: fix overflow in dacloffset bounds check") fixes similar checks in other functions. But leaves this one out, because it is only valid for 32-bit builds. Reproduced on 32-bit ARM with KASAN, by a client sending SMB2 SET_INFO(SEC) with dacloffset=0xfffffff8, then QUERY_INFO(SEC) on the same file: BUG: KASAN: slab-out-of-bounds in build_sec_desc (fs/smb/server/smbacl.c:1105) Read of size 2 at addr c2a273fa by task kworker/1:1/35 CPU: 1 UID: 0 PID: 35 Comm: kworker/1:1 Not tainted 7.3.0-rc2+ #5 Workqueue: ksmbd-io handle_ksmbd_work Call trace: kasan_check_range from build_sec_desc (fs/smb/server/smbacl.c:1105) build_sec_desc from smb2_query_info (fs/smb/server/smb2pdu.c:7676) smb2_query_info from handle_ksmbd_work (fs/smb/server/server.c:160) handle_ksmbd_work from process_one_work (kernel/workqueue.c:3401) process_one_work from worker_thread (kernel/workqueue.c:3473) worker_thread from kthread (kernel/kthread.c:436) Add overflow check.
-
CVE-2026-99310
In the Linux kernel, the following vulnerability has been resolved: nfsd: hold cl_lock in client_has_openowners() client_has_openowners() walks clp->cl_openowners and reads so_stateids without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched creds can use-after-free the nfs4_openowner. BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140 fs/nfsd/nfs4state.c:3718 client_has_openowners() nfsd4_exchange_id nfsd4_proc_compound nfsd_dispatch svc_process Take clp->cl_lock while client_has_openowners() walks the openowner list.
-
CVE-2026-99311
In the Linux kernel, the following vulnerability has been resolved: udf: fix return value for non-recorded-allocated extents in udf_map_block() When someone creates a corrupted UDF filesystem where symlink contains other extent type than EXT_RECORDED_ALLOCATED, it can leads to a crash like: Oops: general protection fault KASAN: maybe wild-memory-access RIP: 0010:page_get_link (fs/namei.c:6503) Call Trace: vfs_readlink (fs/namei.c:6419) do_readlinkat (fs/stat.c:583) __x64_sys_readlink (fs/stat.c:605 fs/stat.c:602 fs/stat.c:602) This is because in this case udf_map_block() fails to convert return value of inode_bmap() from 1 to 0. Returned '1' propagates through udf_bread() all the way up to __page_get_link() where it ends up being treated as a folio pointer with obvious results. Move the reset to 0 line outside the if, so udf_map_block() returns either 0 or -errno, even if the extent type is not EXT_RECORDED_ALLOCATED.
-
CVE-2026-99305
In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and rebuilds it, but fbcon holds raw pointers into that list in fb_display[i].mode and nothing un-publishes them the way do_unregister_framebuffer() and store_modes() do with fbcon_delete_modelist(). The function does refuse to install a new mode while the framebuffer has users (dlfb->fb_count != 0), but only after the list is already destroyed. Reached from the 0666 "edid" sysfs attribute, an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with -EINVAL and still leaves every fb_display[i].mode dangling; the next console switch reads the freed fb_videomode in fb_videomode_to_var(). Test fb_count before touching the list. fbcon takes a reference through fbcon_open(), so that condition covers exactly the states in which fb_display[] points into the list, and the errno returned to userspace is unchanged. BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47 Workqueue: events console_callback Call Trace: fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) display_to_var (drivers/video/fbdev/core/fbcon.c:998) fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182) redraw_screen (drivers/tty/vt/vt.c:994) complete_change_console (drivers/tty/vt/vt_ioctl.c:1141) console_callback (drivers/tty/vt/vt.c:3358) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 28 bytes inside of freed 96-byte region [ffff8880107b4480, ffff8880107b44e0)
-
CVE-2026-99306
In the Linux kernel, the following vulnerability has been resolved: ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks it with newmap->possible_max_rank, which comes straight off the wire: ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then overwrites it with the size of the "in" set. Neither is bounded by CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks than the bitmap holds makes test_bit() read past the end of targets[]. The clear_bit() loop above indexes the same bitmap, though it is additionally bounded by mdsc->max_sessions. The map arrives on the monitor connection, which is unauthenticated in legacy msgr mode. CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the reserved inode ranges in super.h are laid out one rank apart over that span, so a map claiming more ranks is corrupt. Reject it where the rank space is established rather than letting the count reach check_new_map(). BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968) Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127 Workqueue: ceph-msgr ceph_con_workfn Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) check_new_map (fs/ceph/mds_client.c:5968) ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060) extra_mon_dispatch (fs/ceph/super.c:802) mon_dispatch (net/ceph/mon_client.c:1483) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> The buggy address belongs to stack of task kworker/1:2/127 and is located at offset 288 in frame: check_new_map (fs/ceph/mds_client.c:5846) This frame has 1 object: [32, 288) 'targets'
-
CVE-2026-99307
In the Linux kernel, the following vulnerability has been resolved: ceph: require the dentry lease record to cover struct ceph_mds_reply_lease parse_reply_info_lease() reads a 32-bit struct_len off the wire and only checks that many bytes are present, without requiring struct_len to cover sizeof(struct ceph_mds_reply_lease) (10 bytes). A malicious MDS can declare a shorter record and still get the pointer published: the following *p += sizeof(**lease) overshoot is undone by *p = lend, so nothing downstream rejects the reply. ceph_fill_trace() -> update_dentry_lease() then reads 10 bytes through that pointer on any lookup on a mounted CephFS, running past the end of the message front. Require the record to cover the structure, matching the sibling parse_reply_info_dir(). A conforming MDS always encodes the full 10 bytes. BUG: KASAN: slab-out-of-bounds in __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) Read of size 4 at addr ffff888026c63d65 by task kworker/0:3/2366 Workqueue: ceph-msgr ceph_con_workfn Call Trace: __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) ceph_fill_trace (fs/ceph/inode.c:1474 fs/ceph/inode.c:1823) mds_dispatch (fs/ceph/mds_client.c:4229 fs/ceph/mds_client.c:7225) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address is located 357 bytes inside of allocated 360-byte region [ffff888026c63c00, ffff888026c63d68)
-
CVE-2026-99302
In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: reject short connection requests nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The iWARP path allocates exactly the peer-provided length, so a six-byte MPA request reaches the parser and the hsqsize load reads two bytes past the allocation. Require the complete request structure before reading any of its fields. The decoded KASAN report is: BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41 Workqueue: iw_cm_wq cm_work_handler Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) cma_cm_event_handler (drivers/infiniband/core/cma.c:2181) iw_conn_req_handler (drivers/infiniband/core/cma.c:2640) cm_work_handler (drivers/infiniband/core/cm.c:2502 drivers/infiniband/core/cm.c:3858) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Allocated by task 12: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_node_track_caller_noprof (mm/slub.c:5414 mm/slub.c:5545) kmemdup_noprof (mm/util.c:138) cm_event_handler (drivers/infiniband/core/iwcm.c:194 drivers/infiniband/core/iwcm.c:1076) siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408) siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750) siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086) The buggy address is located 0 bytes to the right of allocated 6-byte region [ff1100010459d360, ff1100010459d366)
-
CVE-2026-99303
In the Linux kernel, the following vulnerability has been resolved: speakup: Fix NULL pointer dereference on VT switch + selection When selecting/pasting very quickly after VT switch, the tty is not set yet, leading to a NULL dereference. We can just abort the operation.
-
CVE-2026-99304
In the Linux kernel, the following vulnerability has been resolved: ceph: fix integer overflow in the snap trace bounds check ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps + num_prior_parent_snaps). Both counts come straight off the wire as __le32, so the addition is evaluated in unsigned int and wraps before sizeof(u64) promotes it to size_t: an MDS sending num_snaps = 1 and num_prior_parent_snaps = 0xffffffff makes the sum zero and the check degenerates to ceph_decode_need(&p, e, 0, bad), which always passes. dup_array() then reads num_snaps * 8 bytes past the end of the message front, which ceph_msg_new2() allocates at exactly front_len bytes. An unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or compromised MDS with no client-side action, as do the snaptraces carried in an MDS reply and in a cap import. Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX instead of wrapping, in the style fs/ceph/mdsmap.c already uses for num_export_targets. BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) ceph_update_snap_trace (fs/ceph/snap.c:836) ceph_handle_snap (fs/ceph/snap.c:1155) mds_dispatch (fs/ceph/mds_client.c:7234) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 0 bytes to the right of allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8)
-
CVE-2026-99298
In the Linux kernel, the following vulnerability has been resolved: net: ipv4: add zero check for snd_cwnd_clamp When RTAX_CWND is locked, user is able to pass 0 into it. This could lead to writing 0 to tp->snd_cwnd, leading to a division by zero error. Oops: divide error: 0000 [#1] SMP KASAN NOPTI Call Trace: <IRQ> tcp_reno_cong_avoid (net/ipv4/tcp_cong.c:510 (discriminator 1)) tcp_ack (net/ipv4/tcp_input.c:3517 net/ipv4/tcp_input.c:3873 net/ipv4/tcp_input.c:4440) tcp_rcv_established (net/ipv4/tcp_input.c:6685) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1854) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2248) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207 (discriminator 1)) ip_local_deliver_finish (net/ipv4/ip_input.c:241 (discriminator 1)) ip_local_deliver (./include/linux/netfilter.h:325 ./include/linux/netfilter.h:319 net/ipv4/ip_input.c:262) ip_rcv (./include/net/dst.h:481 (discriminator 6) net/ipv4/ip_input.c:492 (discriminator 6) ./include/linux/netfilter.h:325 (discriminator 6) ./include/li) __netif_receive_skb_one_core (net/core/dev.c:6297 (discriminator 4)) __netif_receive_skb (net/core/dev.c:6410) process_backlog (net/core/dev.c:6761) __napi_poll.constprop.0 (net/core/dev.c:7830) net_rx_action (net/core/dev.c:7893 net/core/dev.c:8050) handle_softirqs (kernel/softirq.c:645) __irq_exit_rcu (kernel/softirq.c:679 kernel/softirq.c:519 kernel/softirq.c:758) irq_exit_rcu (kernel/softirq.c:775) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1062 (discriminator 35) arch/x86/kernel/apic/apic.c:1062 (discriminator 35)) RIP: 0010:tcp_cong_avoid_ai (net/ipv4/tcp_cong.c:482) Fix by checking if user pass in zero as parameter and if lock is present.
-
CVE-2026-99299
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: reject audio endpoint with zero packet size em28xx_audio_urb_init() divides by the audio endpoint's wMaxPacketSize without checking it, so a USB device that declares a zero-sized audio endpoint divides by zero at probe time. Reject a zero-sized audio endpoint like a missing one; the caller already unwinds on a negative return. Oops: divide error: 0000 [#1] SMP NOPTI Workqueue: usb_hub_wq hub_event RIP: 0010:em28xx_audio_init (drivers/media/usb/em28xx/em28xx-audio.c:718) Call Trace: em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) em28xx_init_dev.isra.0 (drivers/media/usb/em28xx/em28xx-cards.c:3887) em28xx_usb_probe (drivers/media/usb/em28xx/em28xx-cards.c:4258) usb_probe_interface (drivers/usb/core/driver.c:396) ... usb_set_configuration (drivers/usb/core/message.c:2268) usb_generic_driver_probe (drivers/usb/core/generic.c:250) usb_probe_device (drivers/usb/core/driver.c:291) ... usb_new_device (drivers/usb/core/hub.c:2703) hub_event (drivers/usb/core/hub.c:5961) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-99300
In the Linux kernel, the following vulnerability has been resolved: media: go7007: only set audio_enabled if go7007_snd_init() succeeded go7007_register_encoder() sets go->audio_enabled before calling go7007_snd_init() and discards its return value. go7007_snd_init() assigns go->snd_context only on success, so a failed ALSA setup leaves audio_enabled set with snd_context still NULL. The disconnect path tests audio_enabled and calls go7007_snd_remove(), which dereferences snd_context unconditionally. go7007_snd_init() returns -ENODEV once its never-decremented static card counter reaches SNDRV_CARDS, so SNDRV_CARDS attach/detach cycles arm the next attach; no memory pressure is needed. Set go->audio_enabled only once go7007_snd_init() has succeeded. Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: usb_hub_wq hub_event RIP: 0010:go7007_snd_remove (drivers/media/usb/go7007/snd-go7007.c:273) Call Trace: go7007_usb_disconnect (drivers/media/usb/go7007/go7007-usb.c:1336) usb_unbind_interface (drivers/usb/core/driver.c:461) device_remove (drivers/base/dd.c:618) device_release_driver_internal (drivers/base/dd.c:1349) bus_remove_device (drivers/base/bus.c:664) device_del (drivers/base/core.c:3965) usb_disable_device (drivers/usb/core/message.c:1478) usb_disconnect hub_event (drivers/usb/core/hub.c:5966) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-99301
In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.
-
CVE-2026-99295
In the Linux kernel, the following vulnerability has been resolved: smb: client: stop processing a read response after a receive error cifs_read_iter_from_socket() may call cifs_reconnect() before returning an error. The reconnect path aborts pending mids and invokes their callbacks. The callback can then release the cifs_io_subrequest containing rdata. cifs_readv_receive() nevertheless continues after a negative return and may dereference rdata in cifs_readv_discard(). KASAN reports the resulting UAF: BUG: KASAN: slab-use-after-free in cifs_readv_receive Read of size 4 by task cifsd cifs_readv_receive (fs/smb/client/transport.c:1284) cifs_demultiplex_thread (fs/smb/client/connect.c:1355) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Freed by task 148: netfs_put_subrequest (fs/netfs/objects.c:267) netfs_read_collection (fs/netfs/read_collect.c:460) netfs_wait_for_in_progress (fs/netfs/misc.c:462) Return the socket error immediately, as this path did before the iterator conversion. This also avoids adding a negative length to total_read.
-
CVE-2026-99297
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix double free in em28xx_alloc_urbs When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs() explicitly frees all items within usb_bufs->buf before calling em28xx_uninit_usb_xfer(), which also frees these items, causing them to be freed twice. BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) Free of addr ffff88802fd37c00 by task kworker/1:2/1182 Workqueue: events request_module_async Call Trace: kasan_report_invalid_free (mm/kasan/report.c:557) check_slab_allocation (mm/kasan/common.c:235) kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1)) usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) usb_free_urb (drivers/usb/core/urb.c:95) em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439) em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Freed by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer() handle the cleanup.
-
CVE-2026-99290
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free after a failed durable reconnect ksmbd_reopen_durable_fd() republishes a detached durable handle in the reconnecting session's file table and takes no reference for that entry. If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to remove the volatile id. Two reconnects of the same handle can both take a lookup reference before either attaches it. If the one that reopens first then fails and drops its references first, the other request makes the final put through ksmbd_put_durable_fd(). That frees the handle without removing the first session's table entry, so tearing that session down writes to freed memory. BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd] Call Trace: __close_file_table_ids+0x14d/0x740 [ksmbd] ksmbd_destroy_file_table+0x76/0x100 [ksmbd] ksmbd_session_destroy+0xf8/0x480 [ksmbd] ksmbd_dispose_sessions+0x13e/0x200 [ksmbd] ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd] Freed by task 1030: __ksmbd_close_fd+0x97d/0x1000 [ksmbd] smb2_open+0x14eb/0xd9f0 [ksmbd] Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file lifetime") handles a final put made by the reconnecting request, but not one made by another holder. Remove the volatile id under the file-table lock on this error path, before the references are dropped, as ksmbd_close_fd() does on the request_open path just above. Removal then no longer depends on which holder makes the final put. The stale comment in the reconnect cleanup is updated to match. A successful reconnect is unchanged.
-
CVE-2026-123670
The Essential Real Estate WordPress plugin before 5.3.6 does not verify that the recipients it allows for its contact email action are legitimate, allowing users with the self-registered Customer role to add any address to that allowlist so that unauthenticated users can then send emails with attacker-controlled content to it through the site.
-
CVE-2026-127422
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.22. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle VM VirtualBox accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H).
-
CVE-2026-127423
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.22. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle VM VirtualBox accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H).
-
CVE-2026-127411
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.22. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox and unauthorized read access to a subset of Oracle VM VirtualBox accessible data. CVSS 3.1 Base Score 6.7 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:H).
-
CVE-2026-127412
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.22. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox and unauthorized read access to a subset of Oracle VM VirtualBox accessible data. CVSS 3.1 Base Score 6.7 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:H).
-
CVE-2026-127414
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.22. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle VM VirtualBox accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H).
-
CVE-2026-114869
Vulnerability in the Applications DBA product of Oracle E-Business Suite (component: AD Utilities). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Applications DBA executes to compromise Applications DBA. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of Applications DBA. CVSS 3.1 Base Score 7.3 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H).
-
CVE-2026-130376
AdminNeo before 5.9.1 contains a stored cross-site scripting vulnerability in FileUploadPlugin that allows database users to store script-bearing SVG files by uploading unsanitized content. Attackers can upload a malicious SVG to a *_path field, executing script in the same-origin session of any administrator who opens the file link.
-
CVE-2026-117657
A Cleartext Transmission of Sensitive Information (CWE-319) vulnerability exists in the Android application "Imperial Palaces Guide" provided by The Imperial Household Agency. A man-in-the-middle attacker may be able to tamper with data transmitted between the application and the server, resulting in the display of modified content to users.
-
CVE-2026-114982
Vulnerability in the Oracle AutoVue product of Oracle Supply Chain (component: Security Related Issues). The supported version that is affected is 21.1.0. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle AutoVue executes to compromise Oracle AutoVue. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle AutoVue accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle AutoVue. CVSS 3.1 Base Score 6.0 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:H/A:H).
-
CVE-2026-100977
NVIDIA OpenShell for Linux contains a vulnerability in L7 REST policy enforcement where a local attacker with low privileges could exploit inconsistent HTTP interpretation by using cleartext HTTP/2 (h2c) over an HTTP CONNECT tunnel to bypass policy restrictions. A successful exploit of this vulnerability might lead to information disclosure and data tampering.
-
CVE-2026-99293
In the Linux kernel, the following vulnerability has been resolved: fuse: don't BUG when the copy buffer is exhausted fuse_copy_fill() hits BUG_ON(!err) once the iterator backing the copy runs out of pages. Over io-uring the amount copied is not bounded by the payload buffer the server registered, so an unprivileged user can drain the iterator and panic the host - mount a FUSE filesystem with small payload buffers, then setxattr() a larger value: kernel BUG at fs/fuse/dev.c:1064! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 148 Comm: exploit Not tainted 7.3.0-rc1 #2 RIP: 0010:fuse_copy_fill (fs/fuse/dev.c:1033) Call Trace: <TASK> fuse_copy_args (fs/fuse/dev.c:1354 fs/fuse/dev.c:1380) fuse_uring_args_to_ring (fs/fuse/dev_uring.c:891) fuse_uring_prepare_send (fs/fuse/dev_uring.c:940 fs/fuse/dev_uring.c:1057) fuse_uring_send_in_task (fs/fuse/dev_uring.c:1745) tctx_task_work_run (io_uring/tw.c:96) tctx_task_work (io_uring/tw.c:133) task_work_run (kernel/task_work.c:233) io_run_task_work (io_uring/tw.h:84) io_cqring_wait (io_uring/wait.c:278) __do_sys_io_uring_enter (io_uring/io_uring.c:2676) do_syscall_64 (arch/x86/entry/syscall_64.c:61) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The reply path can drain it the same way, via the server-supplied payload_sz in fuse_uring_copy_from_ring(). Return -EIO instead. All three fuse_copy_fill() callers already propagate the error.
-
CVE-2025-53697
Use of default credentials vulnerability in Johnson Controls iSTAR Ultra, Johnson Controls iSTAR Ultra SE, Johnson Controls iSTAR Ultra G2, Johnson Controls iSTAR Ultra G2 SE, and Johnson Controls iSTAR Edge G2 allows CAPEC‑560: Use of Default Credentials. This issue affects iSTAR Ultra: before 2.9.2.CU02; iSTAR Ultra SE: before 6.9.2.CU02; iSTAR Ultra G2: before 6.9.2.CU02; iSTAR Ultra G2 SE: before 6.9.2.CU02; iSTAR Edge G2: before 6.9.2.CU02.
-
CVE-2026-128991
xschem 2.9.9 through 3.4.7 contains an out-of-bounds read vulnerability in read_xschem_file() in src/save.c that mishandles embedded-symbol records lacking a preceding instance. Attackers can supply a crafted schematic beginning with a "[" record, causing xschem to read and dereference memory below the instance array and crash.