The internet is broken right now.
6 critical CVEs without a fix in the last 48 hours. Developers are crying quietly into their IDEs. 15 more already have a fix that someone still has to apply.
-
CVE-2026-116206
YesWiki from 4.2.0 before 4.7.0 contains a stored cross-site scripting vulnerability that allows authenticated users to inject script into comment bodies using the wakka raw-HTML syntax. Attackers can post comments via the /api/comments endpoint that render unescaped through the Twig raw filter, executing JavaScript in administrators' and visitors' sessions.
-
CVE-2026-99396
In the Linux kernel, the following vulnerability has been resolved: xfs: bound da-node entry count against the correct geometry xfs_da3_node_verify() bounds the node entry count against the larger of the directory and attribute geometries because, as a buffer verifier, it cannot tell whether the block belongs to the directory or the attribute tree. When the directory block size exceeds the fs block size (e.g. mkfs.xfs -n size=64k -b size=4k), an attribute node buffer is a single fs block that holds only m_attr_geo->node_ents entries, yet a crafted attr node may claim a count up to m_dir_geo->node_ents and still pass the verifier. xfs_da3_node_lookup_int() then indexes btree[] up to that count during its binary search -- an out-of-bounds read via getxattr/listxattr on a mounted crafted image. The buffer verifier is the wrong place to tighten this: it has no fork context, and the transaction-less read path used by getxattr does not run xfs_da3_node_set_type() either. xfs_da3_node_lookup_int(), on the other hand, always runs on that path and holds args->geo, the geometry of the fork actually being searched. Bound the entry count against args->geo->node_ents there, before walking the entries.
-
CVE-2026-99397
In the Linux kernel, the following vulnerability has been resolved: xfs: always report inode repair setup failures LOLLM noticed that xchk_setup_inode silently discards errors being returned by xrep_setup_inode. Fix that, and fix the stub macro so that it actually "returns" a value.
-
CVE-2026-99398
In the Linux kernel, the following vulnerability has been resolved: xfs: always forget cached ACLs if the attr fork swap succeeds LOLLM complains that xrep_xattr_rebuild_tree omits the xfs_forget_acl call if the attr fork swap succeeds (and hence the acls might have changed) but reaping the old attr fork fails. Fix it so that we always purge the cached acls if the swap succeeds, even if subsequent steps do not. This avoids some cache coherency problems with access controls.
-
CVE-2026-99399
In the Linux kernel, the following vulnerability has been resolved: xfs: reject remote xattr entries with an out-of-range value length xfs_attr3_leaf_verify_entry() validates a remote attribute entry's name but never bounds its on-disk value length (xfs_attr_leaf_name_remote. valuelen, a __be32). A crafted leaf with valuelen = 0x80000000 passes the verifier and the CRC. That length is later assigned into the signed int args->rmtvaluelen (xfs_attr3_leaf_getvalue), becoming negative, which slips past the signed -ERANGE check in xfs_attr_copy_value(); a getxattr() with a small buffer then memcpy()s a full remote block into the small kvalue buffer (xfs_attr_rmtval_copyout) -- a heap out-of-bounds write with attacker-controlled content, from an unprivileged getxattr(2) on a mounted crafted image. Reject remote entries whose value length exceeds XFS_XATTR_SIZE_MAX in the leaf verifier, so the malicious block is rejected at read time.
-
CVE-2026-99388
In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: fix buffer length underflow in RDMA transfers When a remote buffer descriptor is larger than the remaining local buffer, smbdirect_connection_rdma_xmit() clamps its length and sets buf_len to zero. The common accounting code then subtracts the clamped length from buf_len, causing it to underflow. If another descriptor follows, the loop processes it with a wrapped remaining length and includes memory beyond the local buffer in the RDMA transfer. A client can trigger an out-of-bounds kernel write with an SMB WRITE request, or an out-of-bounds kernel read with an SMB READ request, by supplying multiple RDMA buffer descriptors with an oversized descriptor before the last one. Remove the premature assignment to buf_len. Subtracting the clamped length already consumes the remaining buffer, so the next iteration stops and only descriptors within the local buffer are used to build work requests.
-
CVE-2026-99389
In the Linux kernel, the following vulnerability has been resolved: smb: server: size directory name conversion buffer correctly A 2048-byte ASCII directory name needs 4098 bytes when converted to UTF-16, including the terminator. ksmbd_convert_dir_info_name() caps its allocation at PATH_MAX and writes past the end of that buffer. Allocate space for one UTF-16 code unit per input byte plus the terminator. Use kmalloc_array() to check the size calculation.
-
CVE-2026-99390
In the Linux kernel, the following vulnerability has been resolved: xfs: fix correction of unwritten extents in quota file data fork LOLLM noticed a couple of problems with the code that fixes unwritten mappings in the quota file's data fork: first, we should zero the ondisk contents as part of converting them to "unwritten" just in case we crash shortly after the conversion. Second, and more importantly, it noticed that we fail to resynchronize the iext tree cursor after modifying the iext tree. If the tree shape changes, we could be in a world of hurt. Third, we should force a quotacheck if we reset an ondisk dquot. Fix all issues.
-
CVE-2026-99392
In the Linux kernel, the following vulnerability has been resolved: xfs: don't subtract excess usage twice when computing agf_btreeblks LOLLM noticed that the free space btree repair code calculates agf_btreeblks from the number of blocks we wrote to rebuild the free space btrees (minus the roots). That's correct. However, it observes that we subtract the "excess" reservation, which is not correct. Fix this accounting problem.
-
CVE-2026-99393
In the Linux kernel, the following vulnerability has been resolved: xfs: don't overrun incore inode when cleaning attr forks LOLLM noticed that xrep_dinode_check_afork doesn't check for a di_forkoff value that is so large that the attr fork would begin after the end of the inode space. This causes afork_{ptr,size} to be nonsense. What we really ought to do here is zap the attr fork.
-
CVE-2026-99394
In the Linux kernel, the following vulnerability has been resolved: xfs: complain loudly when dirtree checker finds broken links LOLLM observed that the directory tree walk code bails out if it finds broken parent pointers along the way. However, it flattens the return code to zero, which means that we can end up in the repair code having not completed the scan. We should never proceed with a repair in this state, so let's mark the scrub incomplete and exit.
-
CVE-2026-99395
In the Linux kernel, the following vulnerability has been resolved: xfs: bound inode fork length against the fork size during log recovery xlog_recover_inode_commit_pass2() copies an inode log item's data/attr fork region into the inode buffer using the on-log region length without bounding it against the fork capacity, e.g.: len = item->ri_buf[2].iov_len; memcpy(XFS_DFORK_DPTR(dip), src, len); The only guard is an ASSERT, which is a no-op on production kernels (CONFIG_XFS_DEBUG off), and xfs_dinode_verify() runs only after the copy. A crafted image with a dirty log can therefore drive a heap out-of-bounds write at mount time. The XFS_ILOG_DBROOT sibling already passes XFS_DFORK_DSIZE as a bound; the DDATA/DEXT and ADATA/AEXT memcpy paths did not. Bound each logged fork region against the destination fork size before copying it, and reject the log item with -EFSCORRUPTED when it does not fit. Because the recovered inode is only verified after the fork data has been copied in, the checks are done up front, before any memcpy into the on-disk inode.
-
CVE-2026-99382
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject FIND data areas that run past the received response CIFSFindFirst() and CIFSFindNext() take the directory entries of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response from DataOffset for DataCount bytes. validate_t2() bounds DataOffset at 1024 and ParameterCount + DataCount by the byte count, and nothing compares DataOffset + DataCount with the number of bytes SendReceive() copied into the buffer. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response whose data area extends past its end has srch_entries_start point at bytes of the request that was just sent, or at whatever the allocation held before, and those bytes are parsed as directory entries. cifs_readdir() and find_cifs_entry() walk the entries with nxt_dir_entry(), which checks every entry but the first of a response against the end of the SMB; cifs_query_path_info() and cifs_backup_query_path_info() read the first entry with no check at all. Those reads stay inside the allocation, but what they return is not part of the response. The last entry, which LastNameOffset locates relative to the data area, is bounded against the received response by an earlier patch of this series, as is every entry that cifs_fill_dirent() parses; the walk itself and the two query functions are not. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose data area extends past the received length, with the -EINVAL that validate_t2() returns for the other malformed transaction responses. cifs_query_path_info() and cifs_backup_query_path_info() still read a whole entry from a data area that may be smaller than one; that is not changed here. A conforming server is not affected. The data block of a transaction response is part of the SMB, so DataOffset + DataCount cannot exceed the smbCalcSize() bytes that SendReceive() copies; coalesce_t2() appends each secondary response to the data area and adds its length to both DataCount and the byte count, which keeps that relation.
-
CVE-2026-99386
In the Linux kernel, the following vulnerability has been resolved: smb: client: don't resurrect an exiting tcon from cached dir workers cfids_laundromat_worker() bumps tcon->tc_count for every expired open cfid and queues cached_dir_offload_close() without checking whether the tcon is already being torn down. Racing with the final cifs_put_tcon(), the tcon comes back from zero and gets torn down twice: T1 T2 cifs_put_tcon() --tc_count == 0, TID_EXITING tconInfoFree() free_cached_dirs() cancel_delayed_work_sync() cfids_laundromat_worker() ++tc_count == 1 queue_work(serverclose_wq) kfree(tcon->origin_fullpath) kfree(tcon) cached_dir_offload_close() close_cached_dir() [UAF] cifs_put_tcon() tconInfoFree() [double free] cached_dir_lease_break() also bumps tc_count without tc_lock, racing with the laundromat's locked update. Take the tcon reference through a helper that refuses once the tcon is TID_EXITING or its refcount has dropped to zero. Queued put_work and close_work then always hold a tcon reference, so tconInfoFree() can't run before they finish and free_cached_dirs() doesn't need to flush any workqueue. If the laundromat can't get a reference, put the cfid back on the dying list for free_cached_dirs() to free; its handle goes away with the tree connection. The lease break path finds the tcon on ses->tcon_list under cifs_tcp_ses_lock, so it can't see TID_EXITING, but it now takes tc_lock.
-
CVE-2026-99387
In the Linux kernel, the following vulnerability has been resolved: smb: client: bound POSIX lock data area by response length CIFSSMBPosixLock() receives a TRANS2 response whose server-provided DataOffset and DataCount are not required by validate_t2() to describe an interval inside the response. A server can therefore make the client read a cifs_posix_lock beyond the response buffer and return those kernel bytes through F_GETLK. Use smbCalcSize() to obtain the full response length after any multipart TRANS2 reassembly, then reject data areas that extend past it before dereferencing them.
-
CVE-2026-99372
In the Linux kernel, the following vulnerability has been resolved: NFSD: cap the number of listeners accepted in listener_set nfsd_nl_listener_set_doit() matches each requested listener against the existing set. The nested loop that does this is O(N * M), where N is the requested count and M is the existing count. The loop runs under sv_lock with bottom halves disabled. A userland request with a very large listener list can therefore spin in atomic context for a long time. Reject a request that carries more than NFSD_NL_LISTENER_MAX (1024) entries. The check goes in nfsd_nl_validate_listeners(), before the code takes any lock. The limit is far above any realistic configuration. This patch does not cap M. Only the message size bounded N; real sockets bound M. A listener_set result set is the requested set, so that path also holds M at the cap, but __write_ports_addxprt() adds two listeners per call and removes none, so repeated calls can push M past it. The worst case under sv_lock is therefore 1024 * M, plus 1024 nla_parse_nested() calls. Both interfaces require CAP_NET_ADMIN.
-
CVE-2026-99375
In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fail I/O to the data server once a lock is lost When a client loses a byte-range lock, because its lease expired and it may not recover the lock (nfs.recover_lost_locks=0) or because reclaim failed, it marks the lock state NFS_LOCK_LOST and fails further I/O by that lock owner. Otherwise an application that believes it holds a lock over a range is never told that the lock is gone, and can overwrite data that another client has since written under its own lock on that range. The NFSv4 READ/WRITE and file layout I/O paths apply this in rpc_call_prepare, where nfs4_set_rw_stateid() returns -EIO for a lost lock. The flexfiles data server I/O path does not: the NFSv3 data server path never checked, and the check on the NFSv4 path was removed when the data server stateid began to be taken from the layout. Fail read and write RPCs to the data server in rpc_call_prepare when the lock is lost. The data server path has no use for the stateid that nfs4_set_rw_stateid() selects, and selecting it looks up a delegation or open stateid on every I/O. Instead add nfs4_lock_context_lost(), which only tests NFS_LOCK_LOST, and check it alongside the open state. Its lookup, __nfs4_lookup_lock_state(), is split out of __nfs4_find_lock_state() and takes no reference: a lock state is only unlinked from state->lock_states under state->state_lock, so one found while holding that lock cannot be freed before it is released. Use it in nfs4_copy_lock_stateid() as well, which only reads the lock state under that lock. That drops a reference get and put from stateid selection for all NFSv4 I/O without changing the stateid selected. Terminating the RPC in rpc_call_prepare is not enough on its own. The done callback reads the -EIO as a data server connection error, forgets the device ID, and resets the I/O to pNFS (or, for an NFSv4 data server, possibly to the MDS). After a reset to pNFS a new LAYOUTGET is granted and rpc_call_prepare fails the I/O again, without end. The existing NFS_CONTEXT_BAD check does not loop, since the open state is then invalid and pnfs_update_layout() fails the reset I/O, but it still forgets the device ID. So when an RPC that was never sent fails and the open context is bad, the open state is invalid, or the lock is lost, complete it with -EIO without error handling. An RPC that was sent and failed is handled as before, so a real data server error is still reported to the MDS.
-
CVE-2026-99376
In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: Free the netid when draining a data-server address list nfs4_pnfs_ds_addr_free() releases all three of an address entry's allocations, but the four sites that drain a decoded list before it reaches a data server open-code the loop and free only da_remotestr and the entry, leaking da_netid. Both layout drivers drain that list when nfs4_pnfs_ds_add() returned a data server already in the cache, and again on their error exits. Lift the drain into nfs4_pnfs_ds_addr_list_free() so an address list has one owner. A striping mount reaches the cached case on nearly every GETDEVICEINFO, since many deviceIDs name the same data servers.
-
CVE-2026-99377
In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: bound the CB_NOTIFY_DEVICEID array count before allocating decode_devicenotify_args() hands the server's notification count straight to kmalloc_objs() as the array length, without checking it against the message that carried it. Bound it the way nfs4xdr.c bounds an attribute length, against xdr_stream_remaining().
-
CVE-2026-99378
In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Complete a device upcall when the pipe is closed Once blkmapd has read a whole upcall, rpc_pipe_read() unlinks the message from every pipe list, so the purges in rpc_pipe_release() and rpc_close_pipes() no longer reach it. bl_upcall_ops supplies no .release_pipe callback, and bl_pipe_destroy_msg() returns without completing the upcall because a downcall is expected to follow. A daemon that exits between the read and the write therefore strands its waiter: bl_resolve_deviceid() sleeps in wait_for_completion() and never returns, and it holds nn->bl_mutex across that wait, so every later device resolution in the net namespace blocks behind it. Add a .release_pipe that completes an upcall blkmapd has consumed and left unanswered. Completing an upcall retires it, so a message the framework has already purged is no longer in flight and is not completed a second time here.
-
CVE-2026-99379
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate SMB1 EA list bounds before parsing CIFSSMBQAllEAs() checks the server-provided EA list length by adding it to the response pointer. On 32-bit systems, a positive length can wrap the pointer and pass the comparison. The parser then walks outside the received response while reading the next FEA header. A response with a list length of 0x40000000 reproduces this as a native i386 page fault and kernel panic from listxattr() against an SMB1 server. Check that the EA list starts within the SMB byte area before reading its header. Keep its length unsigned and compare it with the bytes left in the response without pointer addition. SMB1 is not negotiated by default and requires an explicit vers=1.0 mount.
-
CVE-2026-99370
In the Linux kernel, the following vulnerability has been resolved: NFSD: copy SETXATTR data from all XDR buffer segments nfsd4_vbuf_from_vector() manually copies the head followed by whole pages starting at offset zero. This assumes that all remaining data starts at the beginning of the page array and that no data is stored in the tail. However, nfsd4_decode_setxattr() passes an xdr_buf returned by xdr_stream_subsegment(). Such a sub-buffer can have a nonzero page_base and can span its page and tail segments. Ignoring that layout can copy the wrong bytes into the value passed to vfs_setxattr(). Use read_bytes_from_xdr_buf(), which observes the complete xdr_buf layout.
-
CVE-2026-99371
In the Linux kernel, the following vulnerability has been resolved: nfsd: clear XDR padding in GETXATTR replies nfsd4_vbuf_to_stream() uses a raw memcpy() for the first fragment of an attribute value. xdr_reserve_space() aligns the reservation but does not initialize the extra bytes. If the complete value fits in that fragment, the loop that clears padding for the final fragment is never entered. A remote client reading an attribute whose length is not a multiple of four can therefore receive one to three stale bytes from the response page. Encode the first fragment with xdr_encode_opaque_fixed(), matching the final-fragment path and ensuring that any XDR padding is zeroed.
-
CVE-2026-99363
In the Linux kernel, the following vulnerability has been resolved: NFSD: Map flex file layout IDs through the request's user namespace nfsd4_ff_proc_layoutget() and nfsd4_ff_encode_layoutget() translate the file's owner and group with init_user_ns, but every other identity nfsd places on the wire goes through nfsd_user_namespace(). When the transport carries a credential from a non-initial user namespace, the flex file layout reports host-global IDs. The client copies those IDs into the AUTH_SYS credential it presents to the data server, and svcauth_unix_accept() resolves that credential in the transport's namespace, so data server I/O runs under an identity unrelated to the file's owner. Switching to the request's namespace introduces a second hazard. from_kuid() returns (uid_t)-1 when the target namespace has no mapping for the owner, and the IOMODE_READ arm adds one to that result to derive an identity for which the data server denies writes. The addition would wrap to zero, handing the client uid 0 instead of an identity distinct from the owner. Translate both IDs in nfsd4_ff_proc_layoutget(), which has the svc_rqst, and carry the wire values in struct pnfs_ff_layout. from_kuid_munged() substitutes overflowuid for an unmapped owner and thus never returns (uid_t)-1, so the increment cannot wrap to zero.
-
CVE-2026-133168
OFFIS DCMTK 3.7.1 contains a heap buffer overflow vulnerability in togglePlanarConfiguration8 and togglePlanarConfiguration16 in djcodece.cc, which compute row offsets using rows instead of columns. Attackers can supply a crafted color-by-plane DICOM image with more rows than columns that is compressed with the true-lossless JPEG codec to corrupt heap memory, causing crashes and potentially code execution.
-
CVE-2026-128667
A Cross-Site Request Forgery (CSRF) vulnerability in the admin panel of PHPGurukul News Portal Project V4.1 allows remote attackers to hijack the authentication of administrators and perform unauthorized state-changing actions, such as adding, editing, or deleting posts and sub-admins, or changing passwords, via crafted HTTP requests. This occurs because the application fails to implement anti-CSRF tokens for admin actions and permits destructive operations via HTTP GET requests.
-
CVE-2026-115097
Vulnerability in the Oracle Hyperion Financial Close Management product of Oracle Hyperion (component: Reconciliation Manage). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Financial Close Management. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hyperion Financial Close Management accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N).
-
CVE-2026-115031
Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via SOAP to compromise Oracle Hyperion Data Relationship Management. While the vulnerability is in Oracle Hyperion Data Relationship Management, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 5.0 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:L/I:N/A:N).
-
CVE-2026-130844
HyperFrames before 0.8.216 contains a server-side request forgery vulnerability in the engine URL downloader because isBlockedHost() only checks IP literals and never resolves DNS host names. Attackers can supply compositions with remote media, image or font URLs whose host names resolve to private addresses, making preview or render processes send HTTPS requests to internal services.
-
CVE-2026-100971
NVIDIA OpenShell for Linux contains a vulnerability in the L7 path allowlist enforcement component where a local attacker with low privileges could cause path traversal by using semicolon-dot path sequences to bypass allowlist restrictions. A successful exploit of this vulnerability might lead to information disclosure, data tampering, and denial of service.
-
CVE-2026-122226
GitLab has remediated an issue in GitLab EE affecting all versions from 18.8 before 19.3.9, 19.4 before 19.4.8, and 19.5 before 19.5.6 that under certain conditions could have allowed an authenticated user to access GitLab Duo features restricted by group-based access rules due to improper handling of failed updates to those rules.
-
CVE-2026-107520
Dell PowerStore contains a stored cross-site scripting (XSS) vulnerability. A low-privileged authenticated attacker could exploit this vulnerability, potentially leading to execution of malicious script in a higher-privileged user's session.
-
CVE-2026-123707
The WPGraphQL WordPress plugin before 2.27.1 does not restrict access to posts in custom non-public post statuses, allowing users with the Contributor role and above to read the content of other users' posts in those statuses.
-
CVE-2026-128824
A flaw was found in Red Hat Quay. The v1 registry API error handler reflects the attacker-supplied image_id path segment in a response served as text/html, allowing a reflected cross-site scripting (XSS) attack. By tricking a user into visiting a specially crafted URL, a remote attacker can execute arbitrary JavaScript in the victim's browser within the Quay origin, potentially compromising the user's session.
-
CVE-2026-99287
In the Linux kernel, the following vulnerability has been resolved: xen-netback: Zero out sring pointers on unmap If xenvif_map_frontend_data_rings() fails when a ring is already mapped, it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the ring pointers unchanged. xenvif_connect_data()'s cleanup path calls xenvif_disconnect_queue() which in turn calls xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the pointers a second time. Zero out the ring pointers after they are unmapped to avoid this issue. This is XSA-532
-
CVE-2026-100962
NVIDIA NeMo Export-Deploy for all platforms contains a vulnerability in multimodal deployment where an attacker could cause a server-side request forgery. A successful exploit of this vulnerability might cause information disclosure.
-
CVE-2026-95779
An exposure of the appliance’s confidential certificate information vulnerability exists in HPE Morpheus manager software.
-
CVE-2026-121841
Other issue in Firefox for iOS. This vulnerability was fixed in Firefox for iOS 160.0.
-
CVE-2026-123546
OpenAM before 16.1.4 contains an open redirect and cross-site scripting vulnerability that allows remote attackers to control post-login and logout destinations via the goto and gotoOnFail parameters. Attackers can craft OpenAM login or logout links that redirect victims to phishing sites or run script in the XUI to steal session cookies.
-
CVE-2026-49393
OpenHuman is an open-source agent harness available as a desktop application and Rust library. Before 0.56.0, the core server protects HTTP POST requests to /rpc with bearer middleware but exposes Socket.IO rpc:request and chat:start handlers without equivalent transport or handler-level authentication. A local unauthenticated client can connect to the Socket.IO namespace and dispatch requests through the same protected controller path that rejects a missing bearer on /rpc. Depending on the selected method, the attacker can read configuration or health data, start agent flows, interact with integrated account APIs, alter local data, or stop and restart services. This issue is fixed in version 0.56.0.
-
CVE-2026-120959
A memory-handling flaw in the MongoDB Atlas SQL ODBC Driver can cause values returned for a query to be written outside the bounds of a buffer provided by the calling application. A party able to influence the values a query returns may cause data to be placed at an unintended location in the client application's memory, which may result in unintended modification of that memory or termination of the client process. Reaching this condition depends on a specific, application-chosen way of requesting several result rows at once.
-
CVE-2026-121440
Wasmtime 46.0.0 before 48.0.7 and 49.0.0 before 49.0.4 fails to check forwarded trailers against the WasiHttpHooks::is_forbidden_header hook in wasi-http p3. WASIp3 guests can forward a request or response body so its trailers skip embedder-customized forbidden header filtering, undermining header restrictions the embedder intended.
-
CVE-2026-121441
Wasmtime before 36.0.19, 37.0.0 before 48.0.7, and 49.0.0 before 49.0.4 contains a request smuggling vulnerability in wasi-http that allows guests to set multiple conflicting content-length headers. Malicious guests can make the host send HTTP requests with conflicting content-length values to smuggle requests through servers or intermediaries that do not reject them.
-
CVE-2026-85035
The can_add_rx_filter_msgq() system call installs a CAN RX filter whose callback (can_msgq_put() in drivers/can/can_common.c) is handed the caller's struct k_msgq * as user_data. The controller driver stores that raw pointer in its filter table and dereferences it from the RX path every time a matching frame arrives. The system call verifier z_vrfy_can_add_rx_filter_msgq() in drivers/can/can_handlers.c validated the queue only with K_SYSCALL_OBJ(), which is a point-in-time check of type, initialization and caller permission and says nothing about the object's lifetime. On a build with CONFIG_USERSPACE=y and CONFIG_DYNAMIC_OBJECTS=y, an unprivileged user-mode thread that has been granted access to a CAN device can obtain a message queue whose lifetime it fully controls: k_object_alloc(K_OBJ_MSGQ) followed by k_msgq_alloc_init(). The lifetime of such an object is driven solely by its permission bitmask, and a pointer retained by the kernel is not represented there. After registering the filter, the thread calls k_object_release() — or simply terminates — and unref_check() frees the struct k_msgq storage while the CAN driver still holds the pointer. The next matching CAN frame causes k_msgq_put() to run in supervisor context against freed memory that the attacker can have groomed with another kernel allocation: the frame payload is memcpy()d through the reused block's write_ptr, and the queue's wait_q (and poll_events under CONFIG_POLL) list nodes are manipulated. This yields kernel-heap corruption reachable from a user-mode thread, defeating the isolation CONFIG_USERSPACE is intended to provide; the same dangling pointer also arises benignly when an application thread exits without calling can_remove_rx_filter(). The fix validates the queue with K_SYSCALL_OBJ_STATIC(), which additionally rejects objects carrying K_OBJ_FLAG_ALLOC, so only statically defined queues (CAN_MSGQ_DEFINE()) may be registered from user mode. Supervisor-mode callers bypass the verifier and must themselves keep the queue valid until the filter is removed.
-
CVE-2026-119272
Incorrect authorization in FileSystem in Google Chrome prior to 156.0.8078.79 allowed a remote attacker leveraging social engineering to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium)
-
CVE-2026-54865
Subscriber Cross Site Scripting (XSS) in Podamibe Custom User Gravatar <= 1.0.8 versions.
-
CVE-2026-87102
Sensitive information disclosure and manipulation due to improper token validation. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 42587.
-
CVE-2026-87103
Sensitive information disclosure and manipulation due to improper token validation. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 42587.
-
CVE-2026-114705
Missing Authorization vulnerability in quadlayers WP Social Feed Gallery insta-gallery allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Social Feed Gallery: from n/a through 5.0.13.
-
CVE-2026-133240
OpnForm before 2.8.2 contains a server-side request forgery vulnerability in PublicWebhookUrl::isPublicIp that fails to reject CGNAT, NAT64 and 6to4 address ranges. Authenticated users can configure webhook, form import or PDF image URLs resolving to these ranges to make the server send HTTPS requests to internal hosts.