CVE-20XX-?
agent?

The internet is broken right now.

67 critical CVEs without a fix in the last 48 hours. Somewhere a staging server is public. It always is. 149 more already have a fix that someone still has to apply.

716 CVEs · updated 2026-11-19 02:05 UTC

Reset all
  1. CVE-2026-110513

    Insufficient Session Expiration vulnerability in the Apache Iggy server HTTP transport. A self-issued JSON Web Token (JWT) identified the user only by numeric user ID, and a new user takes the lowest free ID. After an administrator deleted a user, that user's unexpired token, or a token refreshed from it while the ID was free, authenticated as the next account created with that ID and had that account's permissions. Only deployments with HTTP enabled are affected. This issue affects Apache Iggy: through 0.9.0. Users are recommended to upgrade to version 0.10.0, which fixes the issue.

    Auth & access Server Apache Software Foundation Apache Iggy

    unscored Fix listed
  2. CVE-2026-99319

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Refuse a retried DSP load after a failure snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and the interrupt URB when the FPGA firmware image with index 1 is loaded, and then creates the ALSA devices. If usx2y_in04_init() or usx2y_create_alsa_devices() fails, the URBs that were already set up are left in place. The core keeps the index unloaded when the callback fails, so user space may issue the same request again. The second attempt then enters usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still allocated and trips WARN_ON(usx2y->as04.buffer) or WARN_ON(usx2y->in04_urb). The URBs cannot be released at this point: the card may already have registered PCM devices that user space can still open, and the disconnect handler accesses the URBs without holding the DSP lock. Mark the chip as hung instead, so that a retried request is refused with -ENODEV and the assertions keep their meaning. The URBs are released by snd_usx2y_card_private_free() when the card is freed. A failing usx2y_async_seq04_init() still releases its own URBs, so that path remains retryable.

    Other OS & kernel Linux

    unscored No fix listed
  3. CVE-2026-99312

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally reset MMU context when emulating INIT Force an MMU reset when emulating an INIT even if paging was already disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU context. Alternatively, the reset could be scoped strictly to paging being enabled or L2 being active, but SMM is also encoded in the page role. Even though it _should_ be impossible for the vCPU to be INIT'd while SMM is active, there's zero value in not handling SMM. At that point, the only scenario where KVM _doesn't_ need to reset the MMU context is on an INIT with the vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those modes is somewhat common, it's far from a hot path and re-initializing the MMU is not expensive, especially when the role isn't changing (KVM elides most of the re-configuration in that case). Note, like the Fixes commit, this bug only affects nested SVM as INIT is an unconditional intercept on VMX, i.e. it's impossible to emulate INIT while L2 is active. Temporarily keep the guest TLB flush when CR0.PG is being cleared even though it is fully redundant with the flush that is emitted on all INIT events (KVM itself only does RESET when a vCPU is being created, i.e. when CR0.PG must be '0').

    Other OS & kernel Linux

    unscored No fix listed
  4. CVE-2026-99313

    In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: fix race condition when accessing stale stack pointer The driver uses hidpp->send_receive_buf to point to a stack-allocated buffer in the synchronous command path (__do_hidpp_send_message_sync). However, this pointer is not cleared when the function returns. If an event is processed (e.g. by a different thread) while the send_mutex is held by a new command, but before that command has updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will observe that the mutex is locked and dereference the stale pointer. This results in an out-of-bounds access on a different thread's kernel stack (or a NULL pointer dereference on the very first command). Fix this by: 1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex in the synchronous command path. 2. Moving the assignment of the local 'question' and 'answer' pointers inside the mutex_is_locked() block in the handler, and adding a NULL check before dereferencing.

    Memory safety OS & kernel Linux

    unscored No fix listed
  5. CVE-2026-99314

    In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap() usb_stream_hwdep_mmap() reads us122l->sk.s and dereferences it without checking for NULL. The stream object is released by usb_stream_free(), which is reached through us122l_stop() both when the device is disconnected and when us122l_start() fails, and it leaves us122l->sk.s set to NULL. The hwdep file stays usable after that, so a later mmap() KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:usb_stream_hwdep_mmap+0x107/0x890 sound/usb/usx2y/us122l.c:182 crashes while reading s->read_size, which sits at offset 0x10. That NULL is an expected state for this field: usb_stream_hwdep_vm_fault(), usb_stream_hwdep_poll(), usb_stream_hwdep_ioctl(), usb_stream_stop() and usb_stream_free() all test it before use. Only the mmap callback misses the check, so let it return -ENODEV, matching what the other hwdep mapping in usx2yhwdeppcm.c does when its shared buffer has not been allocated.

    Memory safety OS & kernel Linux

    unscored No fix listed
  6. CVE-2026-99315

    In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Fix NULL dereference at hwdep open and release usb_stream_hwdep_open() and usb_stream_hwdep_release() pass the result of usb_ifnum_to_if() straight to usb_autopm_get_interface() and usb_autopm_put_interface(), without checking it for NULL. usb_ifnum_to_if() returns NULL once the device is gone, since usb_disable_device() clears udev->actconfig on disconnect. The hwdep file can outlive the disconnect: the card is released with snd_card_free_when_closed(), so a process that keeps the character device open reaches the driver's release callback after the USB configuration has been dropped, and interface_to_usbdev() then dereferences the NULL interface at offsetof(struct device, parent). The open callback has the same problem when it races with the disconnect. Check both lookups and fail the open with -ENODEV; in release, skip the runtime PM put when the interface is already gone and still run the rest of the per-file cleanup. Move the us122l->first bookkeeping after the checks so that a failed open no longer leaves a stale file pointer behind.

    Other OS & kernel Linux

    unscored No fix listed
  7. CVE-2026-99316

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Initialize idle URBs before submitting streams usb_stream_start() submits the first two capture and playback URBs and only afterwards assigns sk->idle_inurb, sk->idle_outurb, sk->completed_inurb and sk->completed_outurb to the remaining two URBs of each direction. A transfer can complete as soon as usb_submit_urb() has been called, so the completion handler i_capture_start() or i_playback_start() may run before those pointers are set. While the stream is still being synchronized (state below usb_stream_sync1), stream_start() then calls playback_prep_freqn(sk, sk->idle_outurb) with sk->idle_outurb still NULL, and the packet descriptors are written through that NULL pointer: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000018: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] RIP: 0010:playback_prep_freqn+0x11c/0x4a0 sound/usb/usx2y/usb_stream.c:33 Call Trace: <IRQ> stream_start+0x5dc/0x8d0 sound/usb/usx2y/usb_stream.c:596 i_capture_start+0x3da/0x710 sound/usb/usx2y/usb_stream.c:654 __usb_hcd_giveback_urb+0x238/0x550 drivers/usb/core/hcd.c:1657 usb_giveback_urb_bh+0x20b/0x530 drivers/usb/core/hcd.c:1691 tasklet_hi_action+0xa/0x20 kernel/softirq.c:994 handle_softirqs+0x16f/0x440 kernel/softirq.c:645 </IRQ> The four URBs referenced by these pointers are allocated long before and do not depend on any transfer state, so assign them before the submit loop. Keeping the assignment inside the retry path also restores a well-defined URB rotation when the start frame mismatch handling kills and resubmits the streams.

    Other OS & kernel Linux

    unscored No fix listed
  8. CVE-2026-99317

    In the Linux kernel, the following vulnerability has been resolved: ALSA: hwdep: Serialize DSP load requests The check of the loaded DSP indices and the call of the driver's dsp_load callback in snd_hwdep_dsp_load() are not serialized. A hwdep file descriptor can be shared among threads, or inherited across fork, so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both observe the index as unloaded and enter the driver's callback concurrently, even though the device itself is opened exclusively. This breaks the assumption behind hw->dsp_loaded that a firmware index is loaded only once. For example, snd-usb-usx2y hits WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may allocate the US-428 sequence URBs twice. Serialize the check, the callback invocation and the bookkeeping with a per-hwdep mutex, so that the second request returns -EBUSY.

    Other OS & kernel Linux

    unscored No fix listed
  9. CVE-2026-99318

    In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close bcd2000_disconnect() calls snd_card_disconnect(), which only prevents new opens, and then frees the MIDI URBs. A rawmidi file that was already open can still be closed afterwards, and its close callback, bcd2000_midi_output_close(), calls usb_kill_urb() on midi_out_urb. The URB pointers are cleared on disconnect and their accesses are serialized with midi_lock, but bcd2000_midi_output_close() reads midi_out_urb without that lock. The check can therefore pass just before the pointer is cleared, and usb_kill_urb() then runs on the URB that has already been freed: BUG: KASAN: slab-use-after-free in usb_kill_urb+0x74/0x80 Read of size 8 at addr ffff8880078e7d40 usb_kill_urb bcd2000_midi_output_close close_substream rawmidi_release_priv snd_rawmidi_release Allocated by: usb_alloc_urb <- bcd2000_init_midi <- bcd2000_probe Freed by: usb_free_urb <- bcd2000_midi_free <- bcd2000_disconnect Take the lock in bcd2000_midi_output_close() and reference the URB with usb_get_urb() before releasing it. The URB then stays valid until usb_put_urb() after usb_kill_urb() has returned, even if a disconnect frees it in the meantime. usb_kill_urb() itself cannot run under midi_lock, as the completion handler takes the same lock.

    Memory safety OS & kernel Linux

    unscored No fix listed
  10. CVE-2026-113497

    A low-privileged remote attacker can change the password of arbitrary users using the REST API, including administrative accounts. By changing the administrator password, an attacker can obtain full administrative access to the device and modify all configuration settings.

    Auth & access Phoenix Contact FL WLAN 1020

    8.7 HIGH No fix listed
  11. CVE-2026-128981

    ** UNSUPPORTED WHEN ASSIGNED **  Improper Authentication in Apache SeaTunnel Web 1.0.2 allows a user whose account has been disabled to authenticate with valid credentials and obtain a new login token. The login query does not check the account status, so disabling an account does not prevent new logins or access to protected APIs using the newly issued token. This issue requires valid credentials for the disabled account; it is not a credential-free authentication bypass. Apache SeaTunnel Web is no longer maintained. The affected 1.0.2 release does not contain the account-status check added to the main branch in pull request #264. There is no maintained fixed release. Users should discontinue use of this unsupported component. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

    Auth & access Web app Apache Software Foundation Apache SeaTunnel Web

    unscored Fix listed
  12. CVE-2026-95645

    Zohocorp Manageengine DDI Central build below 6500 are affected by a authenticated command injection vulnerability in the Windows DDI Agent's clear_blocked_domains functionality, allowing specially crafted blocked-domain values to trigger arbitrary command execution on Windows systems.

    Injection OS & kernel Zohocorp DDI Central

    9.1 CRITICAL No fix listed
  13. CVE-2026-95643

    Zohocorp Manageengine DDI Central build below 6500 are affected by a authenticated PowerShell command injection vulnerability in the Telnet connectivity feature, allowing specially crafted IPv6 scope identifiers to execute arbitrary commands on managed Windows nodes.

    Injection OS & kernel Zohocorp DDI Central

    9.1 CRITICAL No fix listed
  14. CVE-2026-125820

    Deserialization of Untrusted Data vulnerability in Rymera Web Co Product Feed PRO for WooCommerce woo-product-feed-pro allows Object Injection.This issue affects Product Feed PRO for WooCommerce: from n/a through 13.5.8.

    Code execution Web app Rymera Web Co Product Feed PRO For WooCommerce

    8.8 HIGH No fix listed
  15. CVE-2026-125829

    Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Rymera Web Co Product Feed PRO for WooCommerce woo-product-feed-pro allows Path Traversal.This issue affects Product Feed PRO for WooCommerce: from n/a through 13.5.8.

    Disclosure Web app Rymera Web Co Product Feed PRO For WooCommerce

    7.7 HIGH No fix listed
  16. CVE-2025-15716

    An incorrect implementation of authentication algorithm vulnerability in the SSO API in Synology DiskStation Manager (DSM) before 7.2.2-72806-5 and 7.3.1-86003-1 (7.2.1-69057 is not affected) allows remote attackers to read or write arbitrary files and conduct denial-of-service attacks with prior knowledge of the distinguished name (DN).

    Other Synology DiskStation Manager (DSM)

    8.1 HIGH No fix listed