CVE-20XX-?
agent?

The internet is broken right now.

90 critical CVEs without a fix in the last 48 hours. Developers are crying quietly into their IDEs. 37 more already have a fix that someone still has to apply.

2,072 CVEs · updated 2026-11-11 03:44 UTC

Reset all
  1. CVE-2026-93471

    Improper Handling of Highly Compressed Data (Data Amplification) in esaml_binding in dropbox esaml allows an unauthenticated attacker to exhaust server memory and crash the Erlang VM via a crafted compressed SAMLResponse. esaml_binding:decode_response/2 base64-decodes the attacker-supplied SAMLResponse, inflates it with zlib:unzip/1 with no bound on the output, then converts the result to a charlist with binary_to_list/1 before parsing. This runs on the SAML consume (ACS) and single-logout endpoints, which accept unauthenticated requests by design, and it runs before any signature check. A small deflate stream reaches a compression ratio near 1000 to 1, so a request body of tens of kilobytes inflates to hundreds of megabytes and then to several gigabytes of list heap, so a few requests exhaust memory and take the node down. This issue affects esaml: from 0.1.0 onward.

    Denial of service Server

    8.7 HIGH 0.7% exploit odds Fix listed
  2. CVE-2026-79984

    Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Mina SFTP component. This issue affects Apache Camel: from 4.18.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the mina-sftp scheme, an alternative SFTP implementation whose consumer derives from the same RemoteFileConsumer base class and therefore inherited the same unconstrained resolution. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

    Disclosure Server

    7.4 HIGH 0.7% exploit odds Fix listed
  3. CVE-2026-79985

    Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel SMB component. This issue affects Apache Camel: from 4.2.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the smb scheme. Its consumer walks the share listing on its own rather than through RemoteFileConsumer, skipping only the exact "." and ".." entries, so a name carrying traversal segments in any other form was concatenated unchecked. Reaching it requires a server that emits a listing name which is not a single path segment, which a conforming SMB2 implementation does not do; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

    Disclosure Server

    7.4 HIGH 0.7% exploit odds Fix listed
  4. CVE-2026-65162

    NVIDIA AIStore for Linux contains a vulnerability in the legacy ETL Kubernetes PodSpec initialization API where a remote attacker may supply Kubernetes host-namespace and container-security settings. A successful exploit may lead to code execution, privilege escalation, information disclosure, data tampering, and denial of service.

    Auth & access Server

    10.0 CRITICAL 0.7% exploit odds No fix listed
  5. CVE-2026-90863

    Missing authorization in the administrative interface of Progress Software WS_FTP Server versions prior to 2024.0.7 and 2025.0.4 on Windows could allow a delegated Host Administrator to exceed their authorized scope, potentially enabling arbitrary command execution with elevated privileges and complete compromise of the underlying server.

    Auth & access Server

    9.1 CRITICAL 0.7% exploit odds No fix listed
  6. CVE-2026-17392

    IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to gain unauthorized administrative access to other tenants due to LDAP injection. User-supplied input is not properly neutralized in directory queries, which could change the query and grant access beyond the user's own tenant.

    Injection Server

    9.9 CRITICAL 0.7% exploit odds No fix listed
  7. CVE-2026-115825

    HTTP::Server::PSGI versions before 1.0056 for Perl allow a single request to crash the server by declaring a large Content-Length. The request body is read with sysread() calls sized by the remaining Content-Length. Perl grows the read buffer to the requested length before any data arrives, so the server tries to allocate as much memory as the client declares. A remote attacker can send one request with a large Content-Length and a few body bytes, and perl exits with an out-of-memory error before the application is called. HTTP::Server::PSGI runs as a single process, so the server stays down until restarted.

    Denial of service Server

    7.5 HIGH 0.7% exploit odds Fix listed
  8. CVE-2026-33050

    GeoNode is a geospatial content management system, a platform for the management and publication of geospatial data. Prior to 5.1.0, a crafted vector file layer name supplied during upload allows a low-privileged remote user to inject shell syntax and execute arbitrary operating-system commands on the GeoNode server. This issue is fixed in version 5.1.0.

    Injection Server

    8.8 HIGH 0.7% exploit odds Fix listed
  9. CVE-2026-117567

    esp-mcp through commit 28afddf contains an OS command injection vulnerability that allows attackers to run arbitrary commands by supplying shell metacharacters in MCP tool parameters. Attackers influencing agent tool calls through prompt injection can inject metacharacters into target, port, project_path, or project_name values passed to asyncio.create_subprocess_shell, executing commands as the MCP server user.

    Injection Server

    8.5 HIGH 0.7% exploit odds No fix listed
  10. CVE-2026-117561

    Codefriar sf-mcp through 1.3.2 contains an OS command injection vulnerability that allows attackers to execute shell commands by supplying crafted Salesforce CLI tool flag values. Because escapeValue() in src/utils.ts fails to neutralize backticks, $() substitution, and other shell metacharacters, these values reach execSync in executeSfCommand and run as the MCP server user.

    Injection Server

    8.5 HIGH 0.7% exploit odds No fix listed
  11. CVE-2026-54425

    Uncontrolled recursion in the HTTP/2 HPACK decoder in Apache bRPC before 1.18.0 allows remote attackers to cause denial of service by sending a crafted HTTP/2 header block containing many consecutive Dynamic Table Size Update entries. Each update was decoded by recursively invoking the HPACK decoder, which could exhaust the thread stack before a header field or end of input was reached. Root Cause: The bRPC HPACK decoder recursively decoded the next entry after processing a Dynamic Table Size Update. The decoder did not bound the recursion depth, so a long sequence of update entries could consume excessive stack space. Affected Scenarios: Use bRPC with the built-in HTTP/2 implementation to accept HTTP/2 traffic from an untrusted network. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3343 Note: The fix changes HPACK Dynamic Table Size Update decoding to use iterative parsing instead of recursive parsing.

    Denial of service Server

    7.5 HIGH 0.7% exploit odds No fix listed
  12. CVE-2026-94512

    Heap-based buffer overflow in SQL Server allows an authorized attacker to execute code over a network.

    Memory safety Server Microsoft Sql Server 2017

    8.8 HIGH 0.7% exploit odds Fix listed
  13. CVE-2026-109411

    An access control bypass flaw was identified in Samba's vfs_ceph_rgw module in it's openat() function. An authenticated user can bypass access controls to read or overwrite restricted files on shares configured with the experimental vfs_ceph_rgw module. When a client requests an existing file using mismatched character casing, the module fails to perform a case-insensitive lookup correctly, causing the server to treat the operation as creating a new file. As a result, the server skips standard permission checks on the existing file, allowing the attacker to access or overwrite sensitive data owned by other users.

    Other Server

    8.1 HIGH 0.6% exploit odds No fix listed
  14. CVE-2026-74758

    A heap use-after-free in the RTMP protocol component of Apache bRPC (versions < 1.18.0) allows a remote attacker to crash a bRPC RTMP server by sending a crafted Abort control message. No authentication or application-level request is required. Root Cause: When an RTMP Abort control message names the chunk stream that is currently being parsed (the chunk stream carrying the message itself), RtmpChunkStream::OnAbortMessage calls RtmpContext::ClearChunkStream, which deletes the RtmpChunkStream while its Feed() is still running. After the message handler returns, Feed() continues to access members of the deleted object, resulting in a heap-use-after-free. Affected Scenarios: bRPC servers that enable RTMP support (ServerOptions.rtmp_service set) and accept connections from untrusted networks. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch:  https://github.com/apache/brpc/pull/3452 The fix skips clearing the chunk stream when the Abort message targets the chunk stream that is currently being parsed.

    Memory safety Server

    7.5 HIGH 0.6% exploit odds No fix listed
  15. CVE-2026-107239

    A vulnerability allowing a member of the Veeam Virtualization Extensions Users group to perform remote code execution (RCE) on servers running the Veeam Management Pack for Microsoft System Center Collector service.

    Disclosure Server

    8.8 HIGH 0.6% exploit odds No fix listed
  16. CVE-2026-123270

    Redpanda Connect versions 4.39 to 4.110 contain a missing authentication vulnerability that enables unauthenticated remote code execution (RCE). In streams mode, the management HTTP API is exposed on `0.0.0.0:4195`, but authentication is disabled by default and there is no authentication gate protecting the stream CRUD routes. An unauthenticated attacker with network access to TCP/4195 can `POST` a malicious pipeline definition to `/streams/{id}` that includes code-executing processors such as `command`, `subprocess`, `ffi`, or unsafe `sql_raw`, thereby achieving arbitrary RCE on the host with the permissions of the Redpanda Connect service account. Because pipelines can also return command output in-band via HTTP, this vulnerability enables full host compromise, credential theft, and data exfiltration with no user interaction or credentials required. Starting with v4.111, the API endpoint was reconfigured as opt-in, so this and later versions are no longer vulnerable by default. However, RCE remains achievable on v4.111 and later if the management API is manually enabled via the `--bind-http` flag.

    Code execution Server

    9.8 CRITICAL 0.6% exploit odds No fix listed
  17. CVE-2026-90799

    Unsafe binary deserialisation in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows an authenticated user to cause a denial of service via memory exhaustion. Users are recommended to upgrade to version 3.5.3, which fixes this issue.

    Code execution Server

    1.3 LOW 0.6% exploit odds Fix listed
  18. CVE-2026-82117

    Authentication Bypass by Spoofing Vulnerability in HiRDB. This issue affects HiRDB Server Version 10: from 10-00 before 10-12-01; HiRDB Server Version 9: from 09-00 through 09-66-22; HiRDB Server with Additional Function Version 9: from 09-00 through 09-66/V; HiRDB Server Version 9(32): from 09-02 through 09-66-22; HiRDB Server with Additional Function Version 9(32): from 09-00 through 09-66-/V.

    Auth & access Server

    9.8 CRITICAL 0.6% exploit odds No fix listed
  19. CVE-2026-111422

    In apache-airflow-providers-ssh before 7.0.1, SSHRemoteJobOperator quoted the values of its templated `environment` parameter only once, although they are placed inside an already-quoted wrapper script, so shell syntax such as `$(...)` in a value was executed on the remote SSH host. In a Dag that passes trigger-time input such as `params` or `dag_run.conf` into `environment`, a user who can trigger that Dag but cannot author Dags could run arbitrary commands on the remote host as the SSH connection's user. Users are advised to upgrade apache-airflow-providers-ssh to 7.0.1 or later.

    Injection Server

    8.8 HIGH 0.6% exploit odds Fix listed
  20. CVE-2026-114059

    ArcadeDB before 26.10.1 contains a remote code execution vulnerability that allows authenticated users, including read-only reader role holders, to execute Groovy code because GremlinQueryEngine.command() lacks scripting authorization checks. Attackers can submit Gremlin commands to the POST /api/v1/command/{database} endpoint when the Groovy engine is enabled to run OS commands as the server process user.

    Auth & access Server

    7.7 HIGH 0.6% exploit odds Fix listed
  21. CVE-2026-103091

    Missing Authorization (CWE-862) and Initialization of a Resource with an Insecure Default (CWE-1188) in the MCP proxy (HandleStreamPassThrough in mcp_service.go) and OIDC registration flow (GET /info and POST /register in internal/controlplane/server.go) in Google OSS Agent Mesh (SAM) versions 0.1.0-alpha.1 through 0.1.0-alpha.8 allow a remote attacker to self-enroll into the mesh and invoke arbitrary tools across all connected MCP backend nodes. Because GET /info publicly discloses OIDC configuration, POST /register auto-enrolls any valid OIDC token holder without claim filtering or ban checks, and the default policy binds sam:system:authenticated to wildcard services and targets, an attacker can obtain a mesh credential with full read, write, and execution access on backend services. Users should upgrade to version 0.1.0-alpha.9 or later, which enforces a fail-closed default policy, explicit policy-binding requirements on enrollment, and ban checks.

    Disclosure Server

    9.3 CRITICAL 0.6% exploit odds Fix listed
  22. CVE-2026-121544

    Koodo Reader through 2.4.6 contains a path traversal vulnerability in the self-hosted HTTP server's OPDS handlers that allows authenticated attackers to read files outside the upload directory. Attackers can upload a crafted books.db with a cover value containing ../ sequences, then request /opds/cover/{key} to read files accessible to the server process.

    Disclosure Server

    6.9 MEDIUM 0.6% exploit odds Fix listed
  23. CVE-2026-93011

    A flaw was found in dnsmasq. After a reduction of internal domain-name buffer sizes, the DNSSEC validator can write a few bytes past a name buffer when converting names to and from DNS wire format. An attacker who can cause the server to validate a crafted DNSSEC response may overwrite a small amount of adjacent heap metadata. DNSSEC support is not compiled in by default and must also be enabled at runtime.

    Memory safety Server

    5.3 MEDIUM 0.6% exploit odds No fix listed
  24. CVE-2026-90800

    Missing authorisation checks in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows any request to read the full contents of a prefixed _user or _replicator database via an unauthorised API endpoint. The use of prefixed system databases is very rare. Users are recommended to upgrade to version 3.5.3, which fixes this issue.

    Auth & access Server

    8.1 HIGH 0.6% exploit odds Fix listed
  25. CVE-2026-78048

    A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service. Root Cause: In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process. Affected Scenarios: Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication. How to Fix: (Choose one of the following options)  1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3462 Note: The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0).

    Denial of service Server

    7.5 HIGH 0.6% exploit odds No fix listed
  26. CVE-2026-120367

    Allocation of Resources Without Limits or Throttling vulnerability in Apache Axis2/Java. The JSON message builders, including the Gson, Moshi and HTTP/2 variants, buffered the entire request body with no size limit, so an unauthenticated caller could exhaust server memory with a large JSON request. Version 2.0.2 bounds JSON request bodies with the configurable jsonMaxRequestSize parameter. This issue affects Apache Axis2/Java: through 2.0.1. Users are recommended to upgrade to version 2.0.2, which fixes the issue.

    Denial of service Server

    7.5 HIGH 0.6% exploit odds Fix listed
  27. CVE-2026-92196

    Quest Foglight for Databases renderTemplateString Server-Side Template Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest Foglight for Databases. Authentication is required to exploit this vulnerability. The specific flaw exists within the renderTemplateString method. The issue results from the lack of proper validation of a user-supplied string before processing it with the template engine. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-29889.

    Injection Server

    7.2 HIGH 0.6% exploit odds No fix listed
  28. CVE-2026-70005

    Weak authentication in Active Directory Federation Services (AD FS) allows an unauthorized attacker to bypass a security feature over a network.

    Auth & access Server Microsoft Windows Server 2019

    5.9 MEDIUM 0.6% exploit odds Fix listed
  29. CVE-2026-53995

    MLflow 3.17.1 and earlier contains a path traversal vulnerability in the FileStore tracking backend that allows unauthenticated attackers to control filesystem paths by submitting a crafted trace ID containing traversal sequences to the POST /api/3.0/mlflow/traces endpoint. Attackers can exploit FileStore.start_trace() to write trace_info.yaml, request_metadata, and tag files with attacker-controlled metadata outside the intended experiment trace directory, subject to the server process's filesystem permissions. FileStore is the default tracking backend before MLflow 3.7.0 and opt-in thereafter (the default changed to a SQLite database), so deployments in the earlier part of the affected range are vulnerable without special configuration while later ones are affected only when FileStore is explicitly selected.

    Disclosure Server

    8.8 HIGH 0.6% exploit odds Fix listed
  30. CVE-2026-119923

    A heap-based buffer overflow in the TDS prelogin parser in the Babelfish for PostgreSQL extension versions 1.0-1.5, 2.1-2.15, 3.1-3.12, 4.0-4.8, 5.1-5.4 and in Amazon Aurora PostgreSQL with Babelfish might allow remote attackers to execute arbitrary OS commands as the database process user via a specially crafted malformed TDS prelogin packet to the TDS port. This record consolidates a related NULL-pointer-dereference finding in the same prelogin parser. To remediate this issue, we recommend users upgrade to Babelfish for PostgreSQL extension versions 4.10, 5.6, 6.1 or later. As a workaround, restrict network access to the TDS port (default 1433). Customers using Amazon Aurora PostgreSQL with Babelfish should upgrade their cluster to Aurora PostgreSQL 13.9.16 (1.5.5), 13.23.3 (1.17.2), 14.6.16 (2.3.5), 14.17.8 (2.12.4), 14.18.6 (2.13.3), 14.19.5 (2.14.2), 14.20.5 (2.15.2), 14.22.3 (2.16.1), 14.23.1 (2.17.0), 15.10.8 (3.8.4), 15.12.8 (3.9.4), 15.13.6 (3.10.3), 15.14.5 (3.11.2), 15.15.5 (3.12.2), 15.17.3 (3.13.1), 15.18.1 (3.14.0), 16.8.8 (4.5.5), 16.9.6 (4.6.3), 16.10.5 (4.7.2), 16.11.5 (4.8.2), 16.13.3 (4.9.1), 16.14.1 (4.10.0), 17.4.8 (5.1.4), 17.5.6 (5.2.3), 17.6.5 (5.3.2), 17.7.5 (5.4.2), 17.9.3 (5.5.1), 17.10.1 (5.6.0), 18.3.4 (6.0.2), 18.4.1 (6.1.0) or later, and apply any pending maintenance to ensure they are on the latest patch.

    Memory safety Server

    9.3 CRITICAL 0.6% exploit odds Fix listed
  31. CVE-2026-92190

    Quest Foglight for Databases baseRmiServiceExporter Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest Foglight for Databases. Authentication is not required to exploit this vulnerability. The specific flaw exists within the configuration of the baseRmiServiceExporter bean. The issue results from the lack of proper validation of user-supplied data prior to deserializing it. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-29170.

    Code execution Server

    9.8 CRITICAL 0.6% exploit odds No fix listed
  32. CVE-2026-17336

    IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to execute arbitrary SQL commands due to improper neutralization of special elements used in an SQL command.

    Injection Server

    9.9 CRITICAL 0.6% exploit odds No fix listed
  33. CVE-2026-17132

    IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to execute arbitrary SQL commands due to improper neutralization of special elements used in an SQL command.

    Injection Server

    9.9 CRITICAL 0.6% exploit odds No fix listed
  34. CVE-2026-110111

    Xen Orchestra before 6.9.0 contains an improper access control vulnerability that allows any authenticated user to become global administrator by abusing the unprotected vm.importFromEsxi and vm.importMultipleFromEsxi methods. Attackers can point xo-server at a malicious ESXi host serving a crafted .vmx file with __proto__.permission set, polluting Object.prototype so permission-less accounts inherit admin rights and enabling remote code execution.

    Code execution Server

    7.7 HIGH 0.6% exploit odds Fix listed
  35. CVE-2026-105659

    Uncontrolled Resource Consumption vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin HTTP/2 stream processes indefinitely via a trickle of small WINDOW_UPDATE frames. A stream whose response outruns the connection or stream send window blocks until the peer grants more window, and each block carries a 15 second deadline. Both deadlines restart whenever the peer makes partial progress. Bandit.HTTP2.Connection.finish_data/5 re-queues a partially advanced send in pending_sends with a fresh expires_at, so every WINDOW_UPDATE on stream 0, and every SETTINGS frame, resets the clock. Bandit.HTTP2.Stream.send_data/3 recurses on each stream WINDOW_UPDATE and re-arms a fresh after read_timeout. A peer that grants a few bytes every few seconds keeps the blocked stream process, its Plug state and any resource it holds mid-response alive for as long as it keeps dripping, and repeats this across streams and connections to exhaust server processes and memory. The two paths are independent. The stream-level block is reached on its own by widening the connection window with a large WINDOW_UPDATE on stream 0 and shrinking the per-stream window with a small SETTINGS_INITIAL_WINDOW_SIZE, so closing only the connection-level path leaves it exploitable. This issue affects bandit: from 1.4.0 before 1.13.0.

    Denial of service Server

    8.7 HIGH 0.6% exploit odds Fix listed
  36. CVE-2026-102748

    Dgraph is an open source distributed GraphQL database. Prior to 25.4.0, Dgraph Zero registers administrative HTTP routes on port 6080 without authentication when the administrative interface is enabled. The /removeNode route accepts attacker-controlled id and group values and passes them to Server.RemoveNode, where group 0 can trigger ProposePeerRemoval. A remote unauthenticated attacker who can reach the Zero HTTP port can read topology through /state, allocate identifiers through /assign, access the exposed /moveTablet administrative route, or remove membership through /removeNode, disrupting the Zero control plane and destabilizing Alpha nodes that depend on Zero. The route registration occurs in dgraph/cmd/zero/run.go, and the demonstrated membership-removal path reaches Server.RemoveNode and ProposePeerRemoval. This issue is fixed in version 25.4.0.

    Auth & access Server

    9.2 CRITICAL 0.6% exploit odds Fix listed
  37. CVE-2026-70251

    Server-side request forgery (ssrf) in Microsoft Office SharePoint allows an authorized attacker to elevate privileges over a network.

    Disclosure Server Microsoft Sharepoint Server

    7.5 HIGH 0.6% exploit odds Fix listed
  38. CVE-2026-119052

    llama.cpp b2877 before b11935 contains an uncaught exception vulnerability in the ggml-rpc server that allows unauthenticated remote attackers to crash the rpc-server by sending oversized message lengths. After the HELLO handshake, attackers can send a command such as SET_TENSOR with a length above std::vector::max_size(), triggering an uncaught std::length_error that aborts the process and denies service to all clients.

    Denial of service Server

    8.7 HIGH 0.6% exploit odds Fix listed
  39. CVE-2026-115448

    Uncontrolled recursion in Apache ZooKeeper. The server serializes its data tree to a snapshot by recursing one stack frame per znode level, with no depth bound. A client permitted to create znodes (the default root ACL is open) can build a chain of nested znodes deep enough that taking a snapshot exhausts the JVM stack and kills the snapshot thread; sizes stay within jute.maxbuffer, so existing limits do not prevent it. This is a denial of service that becomes persistent: on restart the server rebuilds the deep tree from its transaction log and fails again while taking the startup snapshot, so it does not return to service, and recovery can entail data loss. The same log affects a leader and its followers, so it can spread across an ensemble. This issue affects Apache ZooKeeper 3.8.0 through 3.8.7 and 3.9.0 through 3.9.6. Users are recommended to upgrade to 3.8.8 or 3.9.7, which fix the issue. As a workaround, use ACLs and authentication to restrict znode creation rather than relying on the default open root ACL.

    Denial of service Server

    8.7 HIGH 0.6% exploit odds Fix listed
  40. CVE-2026-92189

    Quest Foglight for Databases writeTopologySectionToFile External Control of File Path Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest Foglight for Databases. Authentication is not required to exploit this vulnerability. The specific flaw exists within the writeTopologySectionToFile method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-29169.

    Code execution Server

    9.8 CRITICAL 0.6% exploit odds No fix listed
  41. CVE-2026-82116

    Missing Authentication for Critical Function Vulnerability in HiRDB. This issue affects HiRDB Server Version 10: from 10-00 before 10-12-01; HiRDB Server Version 9: from 09-00 through 09-66-22; HiRDB Server with Additional Function Version 9: from 09-00 through 09-66/V; HiRDB Server Version 9(32): from 09-02 through 09-66-22; HiRDB Server with Additional Function Version 9(32): from 09-00 through 09-66-/V.

    Auth & access Server

    9.8 CRITICAL 0.6% exploit odds No fix listed
  42. CVE-2026-86471

    An unvalidated runtime configuration value in Apache CouchDB 3.5.2 and below on all platforms allows a CouchDB server admin to run arbitrary shell commands as the CouchDB operating system user. Users are recommended to upgrade to version 3.5.3, which fixes this issue.

    Injection Server

    9.3 CRITICAL 0.6% exploit odds Fix listed
  43. CVE-2026-111421

    Apache Airflow's Task Execution API stored XCom values written by a task without the reserved-key check applied elsewhere, so a Dag author's task could write an XCom that, when a user later viewed it through the API with deserialization enabled, made the API server instantiate classes from the `airflow.*` namespace with arguments the Dag author chose. This is an incomplete fix for CVE-2026-59242: users who applied that fix in apache-airflow 3.3.1 remain affected through this route and should upgrade to apache-airflow 3.4.0 or later.

    Code execution Server

    8.8 HIGH 0.6% exploit odds Fix listed
  44. CVE-2026-53709

    MCP Context Forge is an MCP gateway and administrative platform. Prior to 1.0.2, mcpgateway/config.py and .env.example ship a known JWT_SECRET_KEY, while verify_jwt_token() accepts HS256 tokens signed with that key and get_current_user() creates a platform administrator when the token subject matches PLATFORM_ADMIN_EMAIL and REQUIRE_USER_IN_DB is false. A remote unauthenticated attacker can therefore mint accepted administrator tokens without a database account. While the vulnerable signing key remains configured and the platform-admin bootstrap remains enabled, forged access survives password rotation, account deletion, and session revocation, allowing administrative disclosure, modification, and service disruption. This issue is fixed in version 1.0.2.

    Auth & access Server

    9.8 CRITICAL 0.6% exploit odds Fix listed
  45. CVE-2026-114213

    Allocation of Resources Without Limits or Throttling vulnerability in the WebSocket fragment reassembly of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via a fragmented message made of many 1-byte continuation frames. Bandit.WebSocket.Connection checks max_fragmented_message_size against the payload bytes received, but keeps every non-final continuation frame as a new list cell around its own binary, and nothing limits the number of fragments. A 1-byte fragment costs 7 bytes on the wire but about 150 to 170 bytes of server memory, so one connection can hold about 150 times the configured limit, roughly 1.2 to 1.4 GB at the default 8 MB. Ping frames between fragments keep the connection alive past the idle timeout. This issue affects bandit: from 1.11.0 before 1.14.0.

    Denial of service Server

    8.7 HIGH 0.6% exploit odds Fix listed
  46. CVE-2026-111101

    Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/1.1 chunked body reader of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory and CPU via a request body made of many 1-byte chunks. The chunked reader in lib/bandit/http1/socket.ex keeps every chunk as its own list cell and binary term until IO.iodata_to_binary/1 joins them, and nothing limits the number of chunks. The :length option of read_body/2 counts only data bytes, so tiny chunks cost far more memory than their payload: 48 MB of 1-byte chunks grew one handler process to about 500 MB and took about 6 s of CPU. The route does not need to read the body, because on keep-alive connections ensure_completed/1 drains unread bodies through the same reader. This issue affects bandit: from 0.1.0 before 1.14.0.

    Denial of service Server

    8.7 HIGH 0.6% exploit odds Fix listed
  47. CVE-2026-110499

    Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to grow per-connection memory and CPU cost without bound via a large SETTINGS_HEADER_TABLE_SIZE. Bandit resizes its HPACK encoder table to whatever size the client advertises, up to 2^32-1 bytes, and indexes response headers into it. Because responses carry distinct values such as date or content-length, nothing is evicted and the table grows with every response for the life of the connection, while each lookup scans it linearly. The SETTINGS handling in Bandit.HTTP2.Connection (lib/bandit/http2/connection.ex) passes remote_settings.header_table_size to HPAX.resize/2 with no server-side cap, and encode_headers encodes every response header as :store. Serving N responses on one connection therefore costs O(N²) CPU in the connection process. This issue affects bandit: from 0.3.6 before 1.14.0.

    Denial of service Server

    8.7 HIGH 0.6% exploit odds Fix listed
  48. CVE-2026-109584

    Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via a small HPACK-compressed HEADERS block. The block stores one large cookie value in the HPACK dynamic table and then references it tens of thousands of times with 1-byte indexed fields. In the reporter's run, a 49 KB block made a server with default settings allocate a 183 MB cookie binary before any application code ran, and every concurrent stream can repeat the cost. Bandit.HTTP2.Connection caps only the compressed block (max_header_block_size), and its check of the decoded list against max_header_list_size never fires because that setting defaults to :infinity. combine_cookie_crumbs/1 in lib/bandit/http2/stream.ex then joins every crumb into one binary. This issue affects bandit: from 0.3.3 before 1.14.0.

    Denial of service Server

    8.7 HIGH 0.6% exploit odds Fix listed
  49. CVE-2026-108525

    Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via DATA frames sent past the advertised receive window. The attacker requests a response larger than the 65,535-byte initial window and withholds WINDOW_UPDATE, so the stream process blocks while sending and stops reading, then floods small DATA frames on that stream. Every frame is queued in the stream's mailbox until the BEAM node runs out of memory. Bandit.HTTP2.Connection.handle_frame/3 in lib/bandit/http2/connection.ex forwards each DATA frame to the stream process without consulting the receive window, and Bandit.HTTP2.FlowControl.compute_recv_window/2 replenishes the window as data arrives rather than as it is consumed, and never answers a violation with FLOW_CONTROL_ERROR. This issue affects bandit: from 0.3.1 before 1.14.0.

    Denial of service Server

    8.7 HIGH 0.6% exploit odds Fix listed
  50. CVE-2026-108529

    Inefficient Algorithmic Complexity vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to exhaust server CPU via small SETTINGS or connection-level WINDOW_UPDATE frames. The attacker opens thousands of streams whose responses block on the connection send window, then sends cheap frames that each make the server walk the whole queue of blocked sends. In the reporter's run, with 3,000 blocked streams a single 9-byte SETTINGS frame took 133 ms to process. do_pending_sends/2 in lib/bandit/http2/connection.ex retries every queued send and, before each retry, removes that entry from the queue with List.delete/2, so one frame costs O(n²) list operations for n blocked streams. max_concurrent_streams defaults to :infinity, so the attacker chooses n. This issue affects bandit: from 0.3.4 before 1.14.0.

    Denial of service Server

    8.7 HIGH 0.6% exploit odds Fix listed