The internet is broken right now.
49 critical CVEs without a fix in the last 48 hours. Somewhere a staging server is public. It always is. 119 more already have a fix that someone still has to apply.
-
CVE-2026-99337
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Bus Lock VM exit Enable Bus Lock VM exit functionality for TDX guests. Bus Lock VM exit is an existing feature supported by KVM. Userspace can enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Bus Lock VM exit for TDX guests by programming the BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler. Note, there is no enumeration bit for this feature by TDX module because all TDX modules support it and allow to set the TD VMCS as long as the hardware supports the feature.
-
CVE-2026-99338
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Notify VM exit Enable Notify VM exit functionality for TDX guests. Notify VM exit is an existing feature supported by KVM. Userspace can enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Notify VM exit for TDX guests by: - Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS bits are set. Since TDX vCPU cannot be reset, it only needs to be configured once when initializing the TDX vCPU. - Adding corresponding exit handler for TDX Notify VM Exit. Notify VM exit can happen when executing the IRET instruction. If the IRET unblocks the NMI blocking state, bit 12 of the exit qualification is set. In this case, the VMM needs to restore the "blocked by NMI" state when it decides to re-enter the guest. For TDX, KVM cannot manage the GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to handle it. Extract the common part without NMI blocking handling into a helper in common.h so that it can be shared between VMX and TDX. Note, KVM uses "pre-production" terminology for the feature formally called Notify VM-Exit. All public versions of the SDM refer to the feature as Instruction Timeout. This will be remedied in the near future, for now, use KVM's terminology for consistency. Note, #2, there is no enumeration bit for Notify VM exit by TDX module because all TDX modules support it, and allow to set the corresponding TD VMCS fields as long as the hardware supports the feature.
-
CVE-2026-99339
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Zero reserved synic flags when delivering message to avoid stack leak Ensure all reserved flags are zeroed when setting the msg_pending flag as part of SynIC message delivery, as setting only msg_pending can leak seven bits of kernel stack data to the guest. E.g. gcc typically uses a bitwise-OR to set the msg_pending flag, without initializing the on-stack variable. Precisely zero the flags, e.g. as opposed to zeroing the entire structure, to make it somewhat more obvious that the flags *need* to be zeroed. E.g. it would be quite easy to misread the initial read of guest memory and think that zeroing the entire structure is completely superfluous.
-
CVE-2026-99323
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix invalid pointer dereference when get_inode_acl() fails When get_inode_acl() fails, it returns an ERR_PTR(), but ksmbd_acls_fattr() stored that pointer in smb_fattr without checking for errors. Later callers then passed the error pointer to security descriptor helpers or posix_acl_release(), resulting in an invalid pointer dereference. This was reproduced on an XFS-backed share when xfs_get_acl() returned ERR_PTR(-ENOMEM). Querying the SMB ACL from a CIFS client triggered the crash: BUG: unable to handle page fault for address: fffffffffffffff8 RIP: smb_acl_sec_desc_scratch_len+0x58/0x90 [ksmbd] Call Trace: smb2_query_info+0x40d/0x17c0 [ksmbd] handle_ksmbd_work+0x1ca/0x770 [ksmbd] Fix this by checking the return values from get_inode_acl() in ksmbd_acls_fattr(). Treat -EOPNOTSUPP as indicating that no ACL is available, and propagate all other errors to the callers. Update smb2_open() and smb2_get_info_sec() to handle these errors.
-
CVE-2026-99324
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read when padding the final compound response Compound response handling pads the last response of a compound to an 8-byte boundary by growing the final iov and the RFC1002 length. smb2_allocate_rsp_buf() allocates exactly response_sz. A command can fill the response buffer to within 7 bytes of its end, for example a QUERY_INFO whose output is bounded only by the space left. The padding can then run past the allocation, and ksmbd_tcp_writev() reads those bytes when it sends the response. BUG: KASAN: slab-out-of-bounds in _copy_from_iter+0x744/0x10e0 Call Trace: _copy_from_iter+0x744/0x10e0 tcp_sendmsg_locked+0x2290/0x3f80 ksmbd_tcp_writev+0x10c7/0x1ab0 [ksmbd] Allocate room for the padding when the request is a compound, as smb2_read() and smb2_read_pipe() do for their payloads. response_sz is unchanged, so commands still fill only up to it, and kvzalloc() zeroes the padding.
-
CVE-2026-99325
In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Add suspend function and gate access under bool. Currently a device can suspend while delayed work is pending or executing. Cancel delayed work if it was pending and restart it if it hasn't run yet. Gate access to show/store functions behind a bool to prevent access prior to cfg_setup() being completed.
-
CVE-2026-99326
In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Prevent deadlock if device removed during setup hid_gos_cfg_remove() calls a mutex before canceling delayed work. That delayed work function calls mcu_property_out(), which holds the same mutex. Prevent deadlock my removing the mutex prior to stopping the work. Additionally, since cancel_delayed_work has the potential to re-arm, switch to disable_delayed_work.
-
CVE-2026-99327
In the Linux kernel, the following vulnerability has been resolved: HID: roccat: kovaplus: reject short button reports The raw event callback runs before HID core validates and zero-pads the report. It passes the buffer to helpers which inspect data[0] and read a complete struct kovaplus_mouse_report_button for button reports. A truncated report can therefore cause an out-of-bounds read. Require enough data for the button report before calling either helper. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw-event length validation to hid-asus.
-
CVE-2026-99328
In the Linux kernel, the following vulnerability has been resolved: HID: picoLCD: check for fb_deferred_io_init() error fb_deferred_io_init() allocates deferred I/O state, populating info->fbdefio_state, or leaving it NULL if an error occurs. Currently picolcd_init_framebuffer() ignores its return value. Therefore if an error arises in fb_deferred_io_init() (for instance, due to an allocation failure) info->fbdefio_state is left NULL. When the file is subsequently opened, fb_open() will dereference a NULL pointer (calling fb_deferred_io_open()). Fix this by checking for the error. Also correct cleanup ordering - defio is initialised after the sysfs file, so cleanup defio first.
-
CVE-2026-99329
In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: always initialize and cancel init_work The writable gpio_mode_enforce parameter can change between probe and remove. If it changes from false to true after probe, remove skips cancellation of init_work. Pending or running work can then access devm-managed driver state after teardown. Changing it from true to false can make remove cancel an uninitialized delayed work item. Initialize init_work whenever IIO is reachable and cancel it unconditionally on remove. Keep the parameter check only for scheduling the initialization. The false-to-true cancellation gap was previously reported by Sashiko. We also encountered this issue during our static-analysis research.
-
CVE-2026-99330
In the Linux kernel, the following vulnerability has been resolved: HID: mcp2200: validate READ_ALL response length The HID core invokes raw_event callbacks before validating the report length. mcp2200_raw_event() casts a READ_ALL response to struct mcp_read_all_resp and reads fields through offset ten without checking that the response contains the structure. A one-byte READ_ALL response reproduced the issue under KASAN: BUG: KASAN: slab-out-of-bounds in mcp2200_raw_event+0x24b/0x3a0 Read of size 1 by task hidtrigger/89 Call Trace: mcp2200_raw_event+0x24b/0x3a0 kasan_report+0x139/0x170 Reject an incomplete READ_ALL response with a protocol error before reading its fields. The common completion path then wakes the command waiter with the error instead of leaving it to time out. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus.
-
CVE-2026-99331
In the Linux kernel, the following vulnerability has been resolved: HID: cp2112: validate response report lengths The HID core invokes raw_event callbacks before validating the report length. cp2112_raw_event() reads every field of a transfer status response without checking size. For a data response, it reads the length at offset two and copies that many bytes from offset three, again without ensuring that the input report contains them. Require a complete transfer status structure. For data responses, first require the header and then ensure the clamped payload length fits in the received report before copying it. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus.
-
CVE-2026-99321
In the Linux kernel, the following vulnerability has been resolved: rust_binder: wake epoll on self-work queued to poll thread When a thread pushes work to its own todo list, InnerThread::push_work() returns PushWorkRes::OkNotifyPoll if the thread uses epoll, but four call sites in thread.rs discard this return value. As a result, a non-blocking BC_* write that enqueues work onto the calling thread's todo list without also reading will not wake epoll. Check the return value and call self.process.notify_poll(false) when PushWorkRes::OkNotifyPoll is returned. This is similar to commit 97830f3c3088 ("binder: signal epoll threads of self-work"), but in C Binder pending thread work also prevented subsequent process work from waking epoll, causing a permanent hang, which is not the case in Rust Binder. This means that in practice, it merely delays notifications rather than completely failing to send them.
-
CVE-2026-99322
In the Linux kernel, the following vulnerability has been resolved: ksmbd: rebind completed CREATE replays without draining the old channel A completed DurableHandleReqV2 CREATE can be replayed through another channel while its original channel is exiting. The existing replay path returns the open but leaves its connection and oplock references pointing at the old channel. Its open count also stays on that channel, and a later CLOSE through the surviving channel decrements the wrong counter. After checking the owner, lease key and persistent flag, verify that an active open is still published in the requesting session's file table. Do this even when no oplock was granted, and before processing a consumed replay. Do not read a borrowed opinfo session pointer for this check. Keep a healthy original binding. If the original channel is exiting or releasing, move the open and its own oplock references to the requesting channel. Serialize this with CLOSE using the session file-table lock, and with detach, reconnect and notification snapshots using m_lock. The earlier lock index and lease-table changes make their lifetimes independent of this connection change. No old-channel r_count wait is needed, including when an unrelated request remains active there. Account final close against fp->conn in one place, balance durable detach and reconnect, and transfer the count with a replay binding change. A final global lookup put may run after CLOSE has removed the volatile id; unlink the open from the inode list on that final close as well. A live completed CREATE replay may follow a break that lowered the durable open's batch oplock. Apply the batch eligibility check only to detached reconnects, while retaining the owner, lease key and persistent flag checks for active replays.
-
CVE-2026-123894
VMware Tools for Windows contains a SAML token signature bypass vulnerability. Affected versions: 13.x.x.x (fixed in 13.1.5.0); 12.3.x (fixed in 12.5.5).
-
CVE-2026-132858
A flaw was found in gdm. The CreateRemoteDisplay D-Bus method fails to perform proper authorization checks when initiating a remote display session. A local attacker with access to the login screen environment can invoke this method with an arbitrary username to bypass standard automatic login verification checks. This vulnerability allows the attacker to achieve privilege escalation and start an unauthorized session as any user on the system, including root.
-
CVE-2026-126631
A flaw was found in OpenSCAP. This vulnerability allows for information disclosure when performing offline scans of untrusted filesystem images, such as container images or virtual machine (VM) disks. Because the scanner does not properly restrict symbolic link (symlink) resolution to the target image's root directory, an attacker can supply a crafted image containing links pointing to files on the host system. When the scan runs, typically with elevated privileges, OpenSCAP follows these links to read sensitive host files and expose their contents in the scan report or manipulate compliance results.
-
CVE-2026-59599
Android on supported Pixel devices before security patch level 2026-11-05 allows elevation of privilege in the hypervisor subcomponent in the kernel, aka A-519434175.
-
CVE-2026-73860
CRIU is a checkpoint and restore tool for Linux. Prior to 4.2.1, CRIU injects a syscall;int3 sequence at the start of the first executable virtual memory area and resumes the target process to execute parasite code. Malicious code in the target process can keep an rseq critical section armed over that injection point so the kernel's restartable-sequence abort redirects execution to an attacker-controlled callback when CRIU resumes the process. In container snapshot environments, the hijacked parasite runs with seccomp disabled and a relaxed AppArmor profile and supplies trusted data to the privileged CRIU process, which can enable higher-privilege code execution. This issue is fixed in version 4.2.1.