CVE-20XX-?
agent?

The internet is broken right now.

50 critical CVEs without a fix in the last 48 hours. Somewhere a staging server is public. It always is. 165 more already have a fix that someone still has to apply.

2,299 CVEs · updated 2026-11-19 22:01 UTC

Reset all
  1. CVE-2026-99508

    In the Linux kernel, the following vulnerability has been resolved: media: ipu-bridge: Fix use-after-free in IVSC error path ipu_bridge_get_ivsc_acpi_dev() returns an ACPI device with a reference held. If no matching CSI device is found, ipu_bridge_check_ivsc_dev() drops that reference before passing the device to dev_err(). Concurrent CSI device and ACPI namespace removal can drop the other references, making this the final put. dev_err() then reads the freed struct acpi_device and its kobject name. This was reproduced without kprobes by racing normal CSI platform-device unregistration and ACPI configfs table removal against the production ipu_bridge_init() entry. KASAN reported the final free through device_release(), followed by invalid reads through _dev_err(). Emit the error message while the lookup reference is still held, then drop the reference as before. Source reproducers and vulnerable/fixed serial logs, with only the build hostname redacted, are available at: https://github.com/kimaiden1984-boop/linux-ipu-bridge-acpi-uaf-reproducer The fixed target builds with W=1 on x86-64. This was not tested on physical IPU hardware. The tests establish runtime reachability but do not measure occurrence frequency on shipping systems or establish exploitability.

    Memory safety OS & kernel Linux

    unscored No fix listed
  2. CVE-2026-99509

    In the Linux kernel, the following vulnerability has been resolved: media: imon: fix use-after-free in display_close via dev_dbg ictx->dev is a raw pointer to the usb_interface's embedded device. On disconnect, usb_disconnect() can drop the last reference on the interface and free it while a userspace fd for /dev/lcd0 is still open. When that fd is later closed, display_close() dereferences the now-freed ictx->dev via dev_dbg(), causing a use-after-free. Remove the dev_dbg() calls that dereference ictx->dev in display_close() and free_imon_context(), rather than taking a reference on the device.

    Memory safety OS & kernel Linux

    unscored No fix listed
  3. CVE-2026-99510

    In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix use-after-free in hackrf_alloc_urbs() error path hackrf_alloc_urbs() frees the URBs it allocated so far when one allocation fails, but leaves the entries in dev->urb_list[] and dev->urbs_initialized untouched. The caller, hackrf_start_streaming(), then calls hackrf_free_urbs() on the error path, which walks dev->urbs_initialized entries and calls usb_free_urb() a second time on the already-freed URBs, causing a use-after-free (slab-use-after-free Write in usb_free_urb()). Drop the redundant cleanup loop inside hackrf_alloc_urbs() and let hackrf_free_urbs(), which the caller already invokes on error, own the cleanup of the successfully allocated URBs.

    Memory safety OS & kernel Linux

    unscored No fix listed
  4. CVE-2026-99511

    In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Fix use-after-free in cx23885_finidev due to race condition In cx23885_v4l2_dev_notify_init, &dev->cx25840_work is bound with cx23885_av_work_handler, and &dev->ir_rx_work and &dev->ir_tx_work are bound with cx23885_ir_rx_work_handler and cx23885_ir_tx_work_handler. cx23885_irq can schedule these works on system_wq when an AV_CORE interrupt is received, and the IR subdevice can also schedule the IR works from its interrupt service routine via the v4l2_device notify callback. If we remove the device, cx23885_finidev makes cleanup and the memory allocated for dev is released by kfree(dev), while the works mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | cx23885_irq | schedule_work(&dev->cx25840_work) cx23885_finidev | cx23885_input_fini(dev) | cx23885_ir_fini(dev) | cx23885_shutdown(dev) | free_irq(pci_dev->irq, dev) | pci_disable_device(pci_dev) | cx23885_dev_unregister(dev) | v4l2_device_unregister(v4l2_dev) | kfree(dev) | // dev is freed | | cx23885_av_work_handler | // use dev (use-after-free) Fix it by canceling the works after the IRQ handler that can schedule them has been stopped, and before proceeding with the remaining cleanup in cx23885_finidev. Note that the flush_work() calls in cx23885_input_ir_stop() do not close this race: they only wait for works that are already queued or running at that moment, they do not prevent the IRQ handler, which is still registered at that point, from scheduling the works again afterwards, and they are skipped entirely when dev->sd_ir is NULL. The cancel_work_sync() calls are therefore placed after free_irq(), the only point at which no new work can be scheduled.

    Memory safety OS & kernel Linux

    unscored No fix listed
  5. CVE-2026-99512

    In the Linux kernel, the following vulnerability has been resolved: media: au0828: fix use-after-free in bulk_timeout timer on disconnect start_urb_transfer() arms dev->bulk_timeout, whose callback au0828_bulk_timeout() queues dev->restart_streaming; that work in turn calls start_urb_transfer() and re-arms the timer. au0828_dvb_unregister() cancels restart_streaming on disconnect but does not sync bulk_timeout. au0828_usb_release() then frees dev with kfree(), so a timer still armed or pending at that point can fire after the free and dereference dev through timer_container_of(). Sync the timer with timer_shutdown_sync() before cancel_work_sync(). The timer callback queues the work, so the timer must be stopped first; the shutdown variant is needed because the work re-arms the timer through start_urb_transfer(). The dvb->frontend == NULL early return guards the register-failure path where the timer was never set up. This bug was found by static analysis.

    Memory safety OS & kernel Linux

    unscored No fix listed
  6. CVE-2026-99513

    In the Linux kernel, the following vulnerability has been resolved: lockd: Fix use-after-free in nlmsvc_retry_blocked nlmsvc_retry_blocked() examines the block at the head of nlm_blocked under nlm_blocked_lock, then releases the lock before calling nlmsvc_grant_blocked() or retry_deferred_block(). The nlm_blocked list reference is all that keeps the block alive across that window. nlmsvc_grant_blocked() does take one of its own, but not until after the lock has been dropped. Unmounting the nfsd filesystem while a lock request is still blocked reaches nlmsvc_traverse_blocks(), which drops the list reference and frees the block along with the nlm_rqst hanging off it. BUG: KASAN: slab-use-after-free in nlm_async_call+0xd6/0x230 Read of size 8 at addr ffff88811b04c808 by task lockd/8377 nlm_async_call+0xd6/0x230 nlmsvc_retry_blocked+0x61c/0x800 lockd+0x144/0x1c0 Freed by task 8392: nlmsvc_release_block+0x231/0x290 nlmsvc_traverse_blocks+0x139/0x1b0 nlm_traverse_files+0x1aa/0xa00 nlmsvc_free_host_resources+0x12/0x60 nlm_shutdown_hosts_net+0x127/0x280 lockd_down+0xd5/0x1c0 Take a reference before releasing nlm_blocked_lock and drop it once the retry has run.

    Memory safety OS & kernel Linux

    unscored No fix listed
  7. CVE-2026-99514

    In the Linux kernel, the following vulnerability has been resolved: landlock: Fix superblock use-after-free in release_inode() Without this fix, release_inode() (task 1) can race with a umount operation in hook_sb_delete() (task 2). The order of operations in which the race occurs is: * task 2: hook_sb_delete() arrives at the end of the function, waiting for landlock_superblock(sb)->inode_refs to become zero. * task 1: release_inode(): does atomic_long_dec_and_test(), decrementing inode_refs to zero. * task 2: gets woken up through some other means, sees that inode_refs is zero and returns. The caller is the unmount operation and proceeds to release the superblock. * task 1: Runs wake_up_var(&landlock_superblock(sb)->inode_refs), *dereferencing the sb_security on the freed-up superblock*. Notably, wake_up_var() does not dereference the pointer passed to it, and only uses it to determine an overapproximated set of tasks to wake up. So while it's potentially possible for an attacker to provide a different value for that pointer, this only results in the wrong set of tasks getting woken up, and in this scenario, no further tasks are actually waiting. Nevertheless, KASAN detects it as a slab-use-after-free read on sb->s_security: BUG: KASAN: slab-use-after-free in release_inode+0x196/0x290 Read of size 8 at addr ffff888103b6c0a8 by task repro/217 release_inode+0x196/0x290 landlock_put_object+0x71/0x90 landlock_free_rules+0x38/0xc0 landlock_put_ruleset+0x47/0x130 fop_ruleset_release+0x33/0x40 __fput+0x305/0x780 Freed by task 54: kfree+0x11c/0x390 process_scheduled_works+0x766/0xe50 worker_thread+0x7bc/0xb20 The fix is to determine &landlock_superblock(inode->i_sb)->inode_refs only once earlier in release_inode(), and later use that precalculated address for the wake_up_var() call, without having to dereference through the superblock.

    Memory safety OS & kernel Linux

    unscored No fix listed
  8. CVE-2026-99515

    In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix event queue release use-after-free iommufd_eventq_fops_release() drops the file's users reference before reading eventq->ictx. Once that reference is dropped, IOMMU_DESTROY in another thread can remove and free the event queue, so the later load accesses freed memory. Read ictx while the users reference still pins the event queue, then drop the reference and put the saved context. The context reference taken by iommufd_eventq_init() keeps ictx valid until the put. Fault and vEVENTQ file descriptors share this release path.

    Memory safety OS & kernel Linux

    unscored No fix listed
  9. CVE-2026-99500

    In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix resource leak in zpci MSI setup If airq_iv_create() fails in __alloc_airq(), the zpci_sbv bit allocated by airq_iv_alloc_bit() is never freed. This permanently leaks one of the ZPCI_NR_DEVICES summary bits, reducing system capacity with each failed device hotplug. In systems with repeated device insertion failures or under memory pressure, all summary bits can be exhausted, preventing new PCI devices from being added until reboot. Add proper error handling to free the zpci_sbv bit and reset zdev->aisb if the AIBV creation fails.

    Other OS & kernel Linux

    unscored No fix listed
  10. CVE-2026-99501

    In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix MSI directed-mode teardown IRQ bit count On s390 with directed interrupts enabled, zpci_msi_teardown_directed() frees the platform's maximum number of MSI bits (zdev->max_msi) instead of the actual allocated count (zdev->msi_nr_irqs). This corrupts the shared IRQ bitmap used by all PCI functions, causing lost interrupts and heap corruption. Fix zpci_msi_teardown_directed() to only free the actual allocated IRQ bit count.

    Other OS & kernel Linux

    unscored No fix listed
  11. CVE-2026-99502

    In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix double-free and NULL deref in zpci MSI domain cleanup zpci_remove_parent_msi_domain() dereferences zbus->msi_parent_domain unconditionally and does not clear it afterwards. zpci_bus_create_pci_bus() removes the domain when pci_create_root_bus() fails, then zpci_bus_release() removes it again on the last kref_put(), reading ->fwnode from the freed irq_domain and freeing it twice. If zpci_alloc_domain() or zpci_create_parent_msi_domain() fails, no domain is created at all; zbus is kzalloc'd, so the same release path dereferences NULL. Return early when there is no domain, and clear the pointer after removing one.

    Memory safety OS & kernel Linux

    unscored No fix listed
  12. CVE-2026-99503

    In the Linux kernel, the following vulnerability has been resolved: ata: sata_fsl: Fix use-after-free of host_priv on probe() failure sata_fsl_host_stop() releases hcr_base and host_priv: static void sata_fsl_host_stop(struct ata_host *host) { struct sata_fsl_host_priv *host_priv = host->private_data; iounmap(host_priv->hcr_base); kfree(host_priv); } ->host_stop() is called by the driver core through the ata_host_stop() devres action which ata_host_start() registers, so it is called both when the device is unbound and when probe() fails after the host has been started. The error_exit_with_cleanup label of sata_fsl_probe() releases hcr_base and host_priv as well, and it is reachable from the two device_create_file() calls which are done after the host has been activated. In that case sata_fsl_host_stop() runs on an already freed host_priv, resulting in a use-after-free and a double iounmap()/kfree(). Add a separate error label for the failures happening after the host has been activated, which only detaches the host and leaves hcr_base and host_priv to sata_fsl_host_stop(). Note that ata_host_detach() is dropped from error_exit_with_cleanup, as that label is now only reachable while host is still NULL.

    Memory safety OS & kernel Linux

    unscored No fix listed
  13. CVE-2026-99504

    In the Linux kernel, the following vulnerability has been resolved: ASoC: audio-graph-card2: Fix use-after-free in audio_graph2_link_c2c() of_graph_get_next_port() consumes the reference of its prev argument. port0 is only borrowed from the caller's iterator, so the call drops a reference the function does not own, and port0 is dereferenced again afterwards. Pass an extra reference, as graph_count_c2c() does, so the reference the callee consumes is the one taken here.

    Memory safety OS & kernel Linux

    unscored No fix listed
  14. CVE-2026-99505

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix a use-after-free in aa_lookupn_ns() aa_lookupn_ns() takes a reference on the namespace it finds with aa_get_ns(), which is kref_get() on the reference count that the namespace is released through, without checking whether the namespace is still in use. A concurrent removal of a ":"-prefixed namespace looks the same namespace up and only then takes the parent lock to remove it, so the last reference can be dropped between the lookup and the aa_get_ns() call: the reference count then reports the increment on a zero count and the kernel classifies the following use of the object as a use-after-free. A user with CAP_MAC_ADMIN can trigger this by writing a ":<name>" removal and a ":<name>/<profile>" removal to /sys/kernel/security/apparmor/.remove concurrently. refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0xc0/0xe0, CPU#6 Call Trace: <TASK> aa_lookupn_ns+0xa9/0xc0 aa_remove_profiles+0x4fb/0x730 ? __kvmalloc_node_noprof+0x219/0x5c0 ? __pfx_aa_remove_profiles+0x10/0x10 ? aa_loaddata_alloc+0x65/0x1f0 ? _copy_from_user+0x2d/0x80 ? aa_loaddata_alloc+0x111/0x1f0 profile_remove+0x2ee/0x4a0 vfs_write+0x21e/0xcf0 ? rcu_core+0x29c/0x1740 ? timerqueue_linked_add+0x1f4/0x3d0 ? __pfx_vfs_write+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_rcu_core+0x10/0x10 ? __pfx_hrtimer_update_next_event+0x10/0x10 ? mutex_unlock+0x7b/0xd0 ? fdget_pos+0x24d/0x4b0 ksys_write+0xf7/0x1c0 ? __pfx_ksys_write+0x10/0x10 ? restore_fpregs_from_fpstate+0x37/0xc0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix by rejecting a namespace whose reference count is zero.

    Memory safety OS & kernel Linux

    unscored No fix listed
  15. CVE-2026-99506

    In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix use-after-free of a new anon folio For a fault in a private mapping with nothing in the page cache, hugetlb_no_page() allocates a folio, locks it and maps it. The folio has one reference, which belongs to the page table entry from then on. After dropping the page table lock the function still sets the migratable flag of the folio and unlocks it. Whoever zaps the entry in between frees the folio. The fault holds the fault mutex and the lock of the vma. MADV_DONTNEED and the first unmap of a hole punch, hugetlb_vmdelete_list(), do not take the fault mutex, and a private vma only has a lock if it owns a reservation map: not with MAP_NORESERVE, and not in the child after fork(). Then the flag is set in, and folio_unlock() is called on, a folio that is free or has a new owner. A surplus page goes back to the page allocator while it is locked: BUG: Bad page state in process init pfn:108e00 flags: 0x200000000000059(locked|uptodate|dirty|head|node=0|zone=2) page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set A page of the pool can be given to the next user, of any file, who locks it and loses the lock to the late folio_unlock(): kernel BUG at mm/filemap.c:1532! hugetlb_no_page+0x111b/0x23e0 hugetlb_fault+0x3a9/0x14a0 An unprivileged process is enough: threads that write to a MAP_PRIVATE | MAP_NORESERVE hugetlb mapping, threads that call MADV_DONTNEED on it, and one that takes the freed pages for another file. Until commit 3a47c54f09c4 ("hugetlbfs: revert use i_mmap_rwsem for more pmd sharing synchronization") the fault held i_mmap_rwsem for reading, which everybody who zaps takes for writing. The lock that commit bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs") gave to private vmas closed the window again, but only for those with a reservation map. Be done with the folio before the page table lock is dropped, as hugetlb_wp() is with its copy. The function already unlocks page cache folios under that lock. Original fix generated by an LLM and sent in private by Josef. [[email protected]: simplify+move comment]

    Memory safety OS & kernel Linux

    unscored No fix listed
  16. CVE-2026-99492

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration Input subsystem guidelines require that device capabilities are advertised before the input device is registered. The Wacom driver was violating this by advertising the SW_MUTE_DEVICE capability post-registration in wacom_set_shared_values() (and duplicating it in device-specific setup cases). Resolve this by moving the SW_MUTE_DEVICE capability setup to wacom_setup_touch_input_capabilities() for all touch devices that support it. For generic touch devices whose capabilities depend on mute switch usages parsed from a sibling Pen/Pad interface, defer registration with -EPROBE_DEFER until the sibling has parsed its descriptors and initialized shared capabilities.

    Other OS & kernel Linux

    unscored No fix listed
  17. CVE-2026-99493

    In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Guard domain index uses against speculative bypass The previous array_index_nospec() placement only covered the admin permission check, leaving ap_test_config_usage_domain() and ap_test_config_ctrl_domain() in the CCA path exposed to speculative execution. Move the sanitization to before all permission and config checks in both the CCA and EP11 paths. Hold the sanitized domain value in another variable so that the later use can choose to use either the original value (subject to speculative execution) or the sanitized value (which may in case of AUTOSEL_DOM reflect the wrong value). Before that, check the domain value to be either AUTOSEL_DOM or in range 0...AP_DOMAINS-1 and return with -EINVAL in case this check does not pass.

    Other OS & kernel Linux

    unscored No fix listed
  18. CVE-2026-99494

    In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix out-of-bounds ptr advance in cca_query_crypto_facility() The FQ reply parser code blindly advanced the walk pointer by a length value read directly from the hardware reply payload without checking that the advance stayed within the allocated reply buffer. A corrupt or malicious device response could push ptr beyond the cprbmem region, causing an out-of-bounds dereference or kernel memory exposure via the subsequent memcpy(). Fix this by tracking the remaining reply buffer space in a variable and validating each device-supplied length field against it before advancing or dereferencing the pointer.

    Memory safety OS & kernel Linux

    unscored No fix listed
  19. CVE-2026-99495

    In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix and improve zcrypt reply message verification checks Add or improve checks related to buffer sizes and reply sizes to the handling of replies from the crypto cards for CCA, EP11 (AP message type 6) and ICA (AP type 50) messages. The verification code related to reply field length was not designed well and thus firmware deficiencies could lead to unexpected behavior in the zcrypt device driver. Thus improve the code to more closely inspect especially length fields at message replies. Add length validation before accessing reply message structures in zcrypt_msgtype6_receive(), zcrypt_msgtype6_receive_ep11(), and zcrypt_msgtype50_receive() to prevent out-of-bounds reads and potential kernel memory disclosure. Also rework these three functions to validate reply lengths more carefully before copying data back into the request buffer. Use size_t for length calculations, reject inconsistent reply sizes, and add defensive handling for short invalid replies. For XCRB replies, validate both reply segments and derive the effective message length from the covered range instead of trusting only the second segment. Additionally improve some of the later invoked evaluation functions which further check the payload. Add comments about length assumptions and for the type50 processing rework the payload processing completely with removing a misplaced BUG_ON().

    Memory safety OS & kernel Linux

    unscored No fix listed
  20. CVE-2026-99496

    In the Linux kernel, the following vulnerability has been resolved: s390/vmcp: Initialize full session info to zero The cma_alloc bit as well as the response can contain old data. cma_release will not free the kmalloced memory in that case and the response code might leak kernel stack data to CAP_SYS_ADMIN users.

    Other OS & kernel Linux

    unscored No fix listed
  21. CVE-2026-99497

    In the Linux kernel, the following vulnerability has been resolved: s390/probes: Fix wrong opcode for cgrb fixup The last byte of the cgrb instruction is 0xe4, however the probes code compares against 0xe6. Fix it.

    Other OS & kernel Linux

    unscored No fix listed
  22. CVE-2026-99498

    In the Linux kernel, the following vulnerability has been resolved: s390/kprobes: Prevent kprobes on instructions with exception table entry The mvcos exception handler ex_handler_ua_mvcos() decodes the faulting instruction, assuming it is an mvcos instruction. In case the instruction is kprobed the decoded instruction is a breakpoint instruction instead, which leads to incorrect instruction decoding and potential register corruption. Fix this by simply preventing to set a kprobe on such instructions, similar like arm64 is doing it.

    Other OS & kernel Linux

    unscored No fix listed
  23. CVE-2026-99499

    In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix use-after-free race in zpci floating interrupt cleanup zpci_clear_irq() stops the adapter from raising new interrupts for the function, but a zpci_floating_irq_handler() already running on another CPU can still be scanning zdev->aibv when zpci_msi_teardown_floating() releases it. Clear the zpci_ibv[] entry so no further handler picks the vector up, then wait for a grace period before releasing it. The handler runs inside the rcu_read_lock() section that do_airq_interrupt() holds across airq->handler(), so synchronize_rcu() drains any handler still in flight. Release the vector and free the summary bit only after the grace period, so neither can be reused while a reader still holds the old pointer. zpci_ibv served both delivery modes, indexed by function under FLOATING and by cpu under DIRECTED. Only the floating vectors are published to and torn down under the interrupt handler, so split the directed vectors out into zpci_dibv and annotate zpci_ibv __rcu, which lets sparse check the accessors above.

    Memory safety OS & kernel Linux

    unscored No fix listed
  24. CVE-2026-99483

    In the Linux kernel, the following vulnerability has been resolved: ALSA: pcmtest: handle multiple wraps in random capture fill The random capture helpers assume that the data generated for one timer tick wraps the DMA ring at most once. However, b_rw describes 200 ms of audio because the timer runs at 5 Hz, so it can be several times larger than a small ring. For 48 kHz, S16_LE, four-channel capture with a 512-frame buffer, the DMA ring is 4096 bytes while one tick generates 76800 bytes. After filling the 4096-byte tail, the existing code issues a second 72704-byte write from the ring base, writing 68608 bytes beyond the ring. Both interleaved and non-interleaved capture are affected. KASAN reports the first write into the adjacent free page as a use-after-free in the random-byte generator. The underlying defect is an out-of-bounds write from the live DMA ring, not a stale DMA allocation. Split each random write repeatedly at the interleaved ring or per-channel block boundary. Keep the hardware-pointer update exactly once after the complete logical write. The issue reproduced on three of three clean boots. With this change, the same vulnerable geometry completed six times without a sanitizer finding. Boundary, pattern-fill, no-timer, open/close, and module-reload controls also completed normally. snd-pcmtest is a test driver, and selecting random fill requires an administrator-controlled module parameter. The written values come from the kernel random generator; no privilege escalation or attacker-controlled write primitive was demonstrated.

    Memory safety OS & kernel Linux

    unscored No fix listed
  25. CVE-2026-99484

    In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: Fix UAF of soundfont zones at note-on snd_emux_note_on() looks up the matching zones via snd_soundfont_search_zone(), which takes sflist->lock only during the lookup and returns the raw zone pointers after releasing it. The caller then stores them in vp->zone without any protection. Meanwhile, a concurrent SNDRV_EMUX_IOCTL_REMOVE_LAST_SAMPLES ioctl may unlink and free those zones in snd_soundfont_remove_unlocked(); this leads to a use-after-free in snd_emux_note_on(), and later at accessing the cached vp->zone, e.g. in snd_emux_send_effect(). Fix it by holding sflist->lock in snd_emux_note_on() over the whole zone lookup and voice setup, and let snd_soundfont_search_zone() require the caller to hold the lock, instead. snd_soundfont_lock_preset() takes sflist->lock for setting presets_locked, so the removal path now syncs with the note-on finish.

    Memory safety OS & kernel Linux

    unscored No fix listed
  26. CVE-2026-99485

    In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: clear the mailbox channel pointer when starting it fails aie2_create_context() allocates a mailbox channel, starts it, and on a failed start frees it again: hwctx->priv->mbox_chann = xdna_mailbox_alloc_channel(ndev->mbox); ... ret = xdna_mailbox_start_channel(hwctx->priv->mbox_chann, ...); if (ret) goto free_channel; ... free_channel: xdna_mailbox_free_channel(hwctx->priv->mbox_chann); hwctx->priv->mbox_chann keeps pointing at the freed channel. That pointer is the driver's own test for whether a hardware context has a usable channel: aie2_destroy_context() returns early on NULL, aie2_sched_job_run() refuses to run a job on NULL, and the message helpers return -ENODEV on NULL. A stale pointer passes all of them. It matters on the restart path. aie2_hwctx_restart() calls aie2_create_context() again on a hardware context that is already live, after aie2_hwctx_stop() has torn its channel down, and the context survives a failure there: aie2_sched_job_timedout() discards the return value entirely, and aie2_hwctx_resume() only propagates it. What is left is a live hardware context holding a freed channel, and every later user of it takes the non-NULL branch: - the next job submitted reaches xdna_mailbox_send_msg() on the freed channel, via the !mbox_chann guard in aie2_sched_job_run(), - a second command timeout reaches aie2_hwctx_stop() -> aie2_destroy_context(), - closing the device reaches aie2_hwctx_fini() -> aie2_release_resource() -> xrs_release_resource() -> aie2_xrs_unload() -> aie2_destroy_context(), and aie2_destroy_context() then calls xdna_mailbox_stop_channel() followed by xdna_mailbox_free_channel() on memory that was already freed: a use-after-free, and a second free of the same channel. The AIE4 management channel already does this correctly - aie4_mailbox_start() clears ndev->aie.mgmt_chann right after freeing it. Do the same here. The create path itself is not affected: when aie2_xrs_load() fails, xrs_allocate_resource() removes the solver node without calling ->unload, and aie2_hwctx_init() frees hwctx->priv, so the stale pointer never outlives the structure holding it. Starting a channel can fail today without this patch: the ring buffer sizes firmware reports are rejected unless both are powers of two, and request_irq() can fail.

    Memory safety OS & kernel Linux

    unscored No fix listed
  27. CVE-2026-99486

    In the Linux kernel, the following vulnerability has been resolved: rust: configfs: fix data offset calculation for subsystem callbacks `get_group_data()` chooses between `Group::<Parent>::container_of()` and `Subsystem::<Parent>::container_of()` based on whether `this` represents the root group of a configfs subsystem. It detects this by checking `(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c` unconditionally sets `cg_subsys` for every `config_group` attached anywhere in a registered subsystem, including the subsystem's own `su_group`. The only `config_group` with a NULL `cg_subsys` is the configfs root, on which userspace cannot trigger callbacks. The check is therefore always false at runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks reach the `Group` branch and may read `data` at the wrong offset. Thus change the `is_root` check to correctly identify whether a group is a root group by comparing `this` to `subsys.su_group`. [ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ]

    Other OS & kernel Linux

    unscored No fix listed
  28. CVE-2026-99487

    In the Linux kernel, the following vulnerability has been resolved: rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML On UML, `warn_flags!` calls `warn_slowpath_fmt()` directly. Its third argument is a taint number, but `warn_on!` passes its bug flags there. As a result, `add_taint()` gets 2304 instead of 9 (`TAINT_WARN`). The warning is not recorded: `/proc/sys/kernel/tainted` stays 0 after `warn_on!` fires, where it should be 512. It also causes an out-of-bounds write in `add_taint()`. Pass `TAINT_WARN` directly, as C does on UML.

    Memory safety OS & kernel Linux

    unscored No fix listed
  29. CVE-2026-99488

    In the Linux kernel, the following vulnerability has been resolved: klist: avoid accesses after waking klist_remove() klist_remove() waits until a node is unreferenced so that its caller can free the containing object. klist_release() currently publishes waiter->woken and wakes the waiter before its final accesses to the waiter and node. klist_remove() can then return, allowing its stack waiter and the containing object to be freed or reused while klist_release() is still running. In particular, bus_remove_driver() can free drv->p while __device_attach() walks the same bus klist with bus_for_each_drv(). On an arm64 Cortex-A72 system, an unpatched 7.2.0-rc3 kernel with CONFIG_PREEMPT_RT=y and CONFIG_KASAN=y reproduced the bug through the in-tree I2C/at24 path. KASAN reported a use-after-free in klist_dec_and_del() reached from klist_next()/bus_for_each_drv() while at24 was being unregistered. Clear n_klist and take a task reference before publishing woken. Use release/acquire accesses for that publication and wake the referenced task. The task reference keeps the waiter task alive if it returns and exits before wake_up_process().

    Memory safety OS & kernel Linux

    unscored No fix listed
  30. CVE-2026-99489

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Redesign shared sibling data lifecycle The Wacom driver coordinates state between sibling interfaces of the same physical device using a shared structure 'wacom_shared' inside 'wacom_hdev_data'. The driver kept a volatile representative pointer 'data->dev' pointing to a sibling 'hid_device' for physical path comparisons during sibling matching. This pointer management is fragile. When the representative device is disconnected, wacom_remove_shared_data() failed to clear/update 'data->dev', leading to a Use-After-Free vulnerability when subsequent sibling probes dereference the dangling 'data->dev' pointer. Resolve this issue by redesigning the sibling data lifecycle: - Eliminate the volatile 'data->dev' representative pointer completely - Redesign 'wacom_hdev_data' to store stable static copies of the required attributes upon first allocation: 'phys' path string, 'vendor', 'product' IDs and the sibling's 'device_type' - Use these static attributes for stable sibling matching in wacom_are_sibling() and wacom_get_hdev_data() This ensures sibling matching remains safe and stable even if individual siblings are dynamically added or removed. To secure the lifecycle against concurrent probe/disconnect races: - Switch kref_put() to kref_put_mutex() in wacom_remove_shared_data() to serialize refcount drops with list traversal and lookup - Modify wacom_release_shared_data() to assume the list lock is already held Also, do not accumulate the 'device_type' capability flag during subsequent sibling probes. Keeping only the first probed sibling's device_type exactly preserves the original sibling matching behavior without introducing side effects.

    Memory safety OS & kernel Linux

    unscored No fix listed
  31. CVE-2026-99490

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_bamboo_pad wacom_bamboo_pad_pen_event() accesses wacom->shared->pen locklessly relative to wacom_remove_shared_data() which nullifies it. This can lead to a Use-After-Free if the sibling device is removed while events are being processed. Resolve this by introducing RCU protection for pen and touch pointers: - Annotate 'pen' and 'touch' in wacom_shared struct with __rcu. - Wrap lockless readers in wacom_bamboo_pad_pen_event() with rcu_read_lock() and rcu_dereference(). - Update writers in wacom_sys.c using rcu_assign_pointer(). - Use rcu_dereference_protected for comparisons under wacom_udev_list_lock. - Also use rcu_access_pointer in wacom_sibling_pending() and wacom_mode_change_work() to avoid warnings (while lockless access in the latter remains a pre-existing issue).

    Memory safety OS & kernel Linux

    unscored No fix listed
  32. CVE-2026-99491

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_intuos_pad wacom_intuos_pad() accesses wacom->shared->touch_input locklessly inside the interrupt handler context. If the Touch sibling device is disconnected, wacom_remove_shared_data() clears 'touch_input' outside any lock, creating a Time-of-Check to Time-of-Use (TOCTOU) race condition where a preempted reader in interrupt context dereferences the freed pointer, leading to a Use-After-Free. Resolve this by introducing RCU protection for the touch_input pointer: - Annotate 'touch_input' in wacom_shared struct with __rcu - Wrap all lockless readers in wacom_wac.c with guard(rcu)() and rcu_dereference() using a unified wacom_report_touch_mute() helper - Update writers in wacom_sys.c using rcu_assign_pointer() - Call synchronize_rcu() in wacom_remove_shared_data() to ensure all active RCU readers have finished before the input device is freed Also wrap wacom_set_shared_values() and touch/pen assignments in wacom_add_shared_data() inside the wacom_udev_list_lock to serialize concurrent probe assignments, and verify that 'shared->touch == hdev' before setting touch_input to prevent concurrent sibling probe state desynchronization.

    Memory safety OS & kernel Linux

    unscored No fix listed
  33. CVE-2026-99475

    In the Linux kernel, the following vulnerability has been resolved: genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes When an interrupt thread exits abnormally via do_exit() (e.g. the interrupt handler oopses) without returning from irq_thread(), a concurrent call to free_irq() could free the irqaction before the irq_thread_dtor() exit task work runs. irq thread (oopsed) free_irq() ------------------- ---------- do_exit() exit_mm() complete_vfork_done() -------> kthread_stop() returns exit_files() ... kfree(action) exit_task_work() irq_thread_dtor() action->... <- use-after-free Track the pending exit work with the IRQTF_EXIT_WORK thread flag, and have __free_irq() wait for the bit to clear before kfree(). irq_thread_dtor() only runs on irq_thread abnormal exit. If that dtor also faults, free_irq() will hang indefinitely, but double IRQ thread faults require a reboot anyways. [ tglx: Add missing include ]

    Memory safety OS & kernel Linux

    unscored No fix listed
  34. CVE-2026-99476

    In the Linux kernel, the following vulnerability has been resolved: fsverity: Set S_VERITY only after rollback is no longer possible Commit f77f281b6118 ("fsverity: use a hashtable to find the fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to make concurrent reads start going through fsverity verification slightly earlier than they did before. Instead of it happening when enable_verity() calls fsverity_set_info(), it now happens when ->end_enable_verity() sets S_VERITY. However, ext4 and btrfs can roll back verity after they set S_VERITY, causing a use-after-free. Fix that by making ext4 and btrfs set S_VERITY only after rollback is no longer possible. On failure, don't roll back S_VERITY, but do roll back the filesystem-specific verity flag. Also update enable_verity() to handle any future instances of this bug more safely by warning and *not* freeing the fsverity_info. Finally, tweak some comments. Clarify one, and move information from another to its proper place in the comment for ->end_enable_verity().

    Memory safety OS & kernel Linux

    unscored No fix listed
  35. CVE-2026-99477

    In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: pin mm_users in do_pagemap_scan() The PAGEMAP_SCAN ioctl takes mmap_read_lock() on an mm obtained from /proc/<pid>/pagemap without holding a reference to mm_users. proc_mem_open() deliberately grabs only mm_count, so a consumer that touches the address space has to call mmget_not_zero() first. Every other consumer in this file does -- m_start(), do_procmap_query(), show_smaps_rollup() and pagemap_read() -- but do_pagemap_scan() does not. Without that reference the target can reach exit_mmap() concurrently, and exit_mmap() calls unmap_vmas() while holding mmap_lock only for reading, which does not exclude the scanner. For ordinary VMAs this is harmless, as free_pgtables() and remove_vma() run afterwards under mmap_write_lock. A shared hugetlb VMA is different: __hugetlb_zap_end() frees the VMA's hugetlb_vma_lock inside the read-locked phase. walk_hugetlb_range() can therefore load vma->vm_private_data, have the lock freed underneath it, and then down_read() a freed rw_semaphore. The load happens before the freeing side clears the pointer, so this is a use-after-free and not a NULL dereference. Any unprivileged user can reach it with no huge pages configured, as hugetlb_reserve_pages() allocates the lock before the VM_NORESERVE early return. Pin mm_users across the scan, the way the other consumers do. mmput() from the exiting task can then no longer reach exit_mmap() while a walk is in progress. [[email protected]: remove unneeded & undesirable test for !mm]

    Memory safety OS & kernel Linux

    unscored No fix listed
  36. CVE-2026-99478

    In the Linux kernel, the following vulnerability has been resolved: filelock: keep superblock active through delegation wait A caller may drop its path after try_break_deleg() returns a delegated inode but before break_deleg_wait() finishes. The extra inode reference held in struct delegated_inode does not keep the superblock active. After a lazy unmount, closing the delegation holder can release the last mount reference and shut down the superblock while another task waits for the delegation break. The waiter's final iput() can then enter the filesystem's eviction code after its superblock-private state was freed. This has been observed as a KASAN use-after-free in shmem_evict_inode(). When try_break_deleg() saves a delegated inode, take an active reference to its superblock while the caller still pins the mount. Keep that reference through break_deleg_wait() and the final iput(), then release it with deactivate_super(). This protects every caller of the helpers, including the mknod, mkdir, symlink and rmdir paths that drop their path before waiting.

    Memory safety OS & kernel Linux

    unscored No fix listed
  37. CVE-2026-99479

    In the Linux kernel, the following vulnerability has been resolved: fbdev: atmel_lcdfb: Prevent FIFO work after removal The LCD controller IRQ schedules sinfo->task to recover from a FIFO underflow. Probe currently requests the IRQ before initializing the work, so an early interrupt can schedule an uninitialized work item. The probe error path and remove path cancel the work before freeing the IRQ. A FIFO-underflow interrupt can schedule the work again after that cancellation. framebuffer_release() may then free sinfo while the work is still pending. KASAN reported a use-after-free in atmel_lcdfb_task() when an underflow interrupt occurred during removal. With the IRQ freed before the work was cancelled, the same test completed without a kernel diagnostic. Initialize the work before requesting the IRQ. In both cleanup paths, free the IRQ before cancelling the work so that it cannot be scheduled again after cancellation.

    Other OS & kernel Linux

    unscored No fix listed
  38. CVE-2026-99480

    In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix TOCTOU race between GROUP_REGISTERED check and erase panthor_group_destroy() checks the GROUP_REGISTERED mark and then calls xa_erase() without holding the xarray lock across both. If the handle is destroyed by another thread in between, and a concurrent GROUP_CREATE reuses the freed ID, the first destroy erases and releases the new, still-initializing group, leading to a use-after-free in panthor_group_create(). Do the mark check and erase atomically under xa_lock().

    Memory safety OS & kernel Linux

    unscored No fix listed
  39. CVE-2026-99481

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_vhci: Pin module for debugfs file operations An open debugfs file retains its file_operations pointer in the debugfs proxy state. However, force_suspend_fops, force_wakeup_fops, aosp_capable_fops, and force_devcoredump_fops have no .owner set to THIS_MODULE. As a result, full_proxy_open_regular() calls fops_get() which succeeds without taking a reference to the hci_vhci module. When userspace opens any of these debugfs files and later closes the /dev/vhci file descriptor (triggering vhci_release() and debugfs file removal), the open debugfs file descriptor remains valid in userspace. Because the module refcount was not incremented, the hci_vhci module can be unloaded via delete_module (rmmod hci_vhci). When the userspace process subsequently closes the debugfs file descriptor, full_proxy_release() accesses the already unmapped file_operations structure, resulting in a kernel page fault / oops: BUG: unable to handle page fault for address: fffffbfff846f18b #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:full_proxy_release+0x8e/0x140 Call Trace: <TASK> __fput+0x39f/0xa60 fput_close_sync+0xff/0x200 __x64_sys_close+0x8c/0xf0 do_syscall_64+0xc3/0x590 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Modules linked in: ... [last unloaded: hci_vhci(E)] The issue was discovered via manual code audit of drivers/bluetooth/hci_vhci.c and verified on a Linux 7.3-rc6 test VM with CONFIG_BT_VHCI=m by keeping a debugfs file open across controller teardown and module unload. Set .owner = THIS_MODULE on all four file_operations structures so that debugfs pins the module until all file descriptors are closed.

    Other OS & kernel Linux

    unscored No fix listed
  40. CVE-2026-99482

    In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: ps: fix snd_acp63_remove() teardown ordering The ACP IRQ handlers dereference the SoundWire, SoundWire DMA, and PDM child platform devices, but snd_acp63_remove() unregisters them while the interrupt is still held by devres, which frees it only after remove returns. An interrupt in this window is a use-after-free. Mask the ACP interrupt sources and call devm_free_irq() before the first child device is unregistered. The masking goes through the new acp_hw_ops->disable_interrupts callback, keeping the remove path platform-agnostic. The interrupt line is shared, and acp_hw_deinit() clears the sources only after the children are gone, which would leave the line raised with no handler left to ack it. The window predates the tagged refactor, which only reshaped the dereferences. devm_free_irq() waits for in-flight handlers, but not for work the hardirq has already queued: acp63_irq_handler() schedules amd_sdw_irq_thread on the SoundWire manager. Draining that work in the manager's remove path is a soundwire-side change and follows separately. This issue was found by an in-house static analysis tool.

    Memory safety OS & kernel Linux

    unscored No fix listed
  41. CVE-2026-99468

    In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: cancel timeout worker when streaming stops Each per-fd context ctx owns a delayed_work (ctx->task_timer, callback mxc_jpeg_device_run_timeout) armed via schedule_delayed_work() at the end of mxc_jpeg_device_run() to recover a stalled encode/decode job. The only existing cancellation is cancel_delayed_work() in the frame-done IRQ handler, which de-queues a pending work item but does not wait for a callback that has already started, and it only runs when a frame completes. When the fd is closed while a job is in flight (the frame-done IRQ has not fired yet), nothing syncs the worker before mxc_jpeg_release() frees ctx with kfree() after v4l2_m2m_ctx_release(). A queued or executing mxc_jpeg_device_run_timeout() can then recover ctx through container_of(&ctx->task_timer) and dereference it (ctx->mxc_jpeg, slot_data, dev_warn) after ctx has been freed. Cancel the worker from mxc_jpeg_stop_streaming(). The cancel cannot live in mxc_jpeg_release(): mxc_jpeg_device_run() arms the timer while holding only hw_lock, not the mxc_jpeg->lock mutex that release holds, so a cancel in release could still race a concurrent mxc_jpeg_device_run() that re-arms the timer afterwards. mxc_jpeg_stop_streaming() instead runs inside v4l2_m2m_ctx_release() -> vb2_queue_release(), i.e. after v4l2_m2m_cancel_job() has set TRANS_ABORT and waited for any in-flight job to finish (so __v4l2_m2m_try_queue() will not queue and v4l2_m2m_try_run() will not run any further job for this context, which prevents mxc_jpeg_device_run() from re-arming the timer) and before the m2m context is freed. cancel_delayed_work_sync() removes a pending work item and waits for a running callback, so the worker can no longer race with the subsequent kfree(). The cancel is placed before the buffer-release loop so a concurrently running timeout callback cannot race with it over the same buffers. If the frame-done IRQ canceled a still-pending timer, this cancel is a no-op; if the timeout callback has already started, it waits for the callback to finish. The same mxc_jpeg_stop_streaming() call is also reached from VIDIOC_STREAMOFF, which drains the worker early, although STREAMOFF itself does not free ctx -- the use-after-free arises only when the fd is later closed. This bug was found by static analysis.

    Other OS & kernel Linux

    unscored No fix listed
  42. CVE-2026-99469

    In the Linux kernel, the following vulnerability has been resolved: media: gspca: use vb2_video_unregister_device() on disconnect gspca uses vb2_fop_release(), but gspca_disconnect() only unregisters the video device. If the queue owner closes the device after USB disconnect, vb2_fop_release() releases the queue and invokes gspca_stop_streaming() at that point. gspca_stream_off() calls subdriver stop callbacks and usb_set_interface() through gspca_dev->dev. By the time the late close runs, the USB core can have freed the usb_device, resulting in a use-after-free. This was observed as a KASAN use-after-free in sd_stopN(). Use vb2_video_unregister_device() so the queue is released and streaming is stopped synchronously during disconnect, while the usb_device is still valid. Since the helper takes the queue lock, which is usb_lock, call it after dropping that lock.

    Memory safety OS & kernel Linux

    unscored No fix listed
  43. CVE-2026-99470

    In the Linux kernel, the following vulnerability has been resolved: media: cx23885: unregister DVB bus when SP2 CI setup fails The DVBSKY S950C, DVBSKY T980C and TechnoTrend CT2-4500 CI paths register the DVB bus before attaching their SP2 CI client. If that client cannot be created, bound, or pinned, the current error path removes the I2C frontend components and only deallocates the frontend list, leaving the registered DVB adapter behind. Removing an I2C demod before unregistering the DVB bus can also expose the use-after-free ordering fixed for the normal remove path. Unregister the DVB bus immediately when SP2 CI setup fails, before the existing I2C client cleanup. The bus helper empties the frontend list, so the later frontend deallocation has nothing left to release. Keep failures from vb2_dvb_register_bus() on the existing cleanup path. Also release an unbound SP2 client and propagate the actual I2C creation or CI registration error. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

    Other OS & kernel Linux

    unscored No fix listed
  44. CVE-2026-99471

    In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add SRCU protection for virtual-mode HPT hcalls The virtual-mode HPT hcall handlers (H_ENTER, H_REMOVE, H_BULK_REMOVE, H_CLEAR_REF, H_CLEAR_MOD) call into book3s_hv_rm_mmu.c, which accesses memslots via kvm_memslots_raw(). kvm_memslots_raw() uses rcu_dereference_raw_check() to bypass SRCU lockdep annotation checking. This is safe in real mode because the entire guest entry/exit is wrapped in srcu_read_lock/unlock inside kvmppc_run_core() and kvmhv_run_single_vcpu(). However, since commit 6165d5dd99db ("KVM: PPC: Book3S HV: add virtual mode handlers for HPT hcalls and page faults"), these same handlers are also executed in virtual mode via kvmppc_pseries_do_hcall(), which runs after SRCU has already been released on guest exit. A concurrent KVM_SET_USER_MEMORY_REGION deletion or move can therefore call synchronize_srcu_expedited() — which does not wait for this thread — and then kfree(slot) and vfree(slot->arch.rmap) while the hcall handler still holds a raw pointer to the memslot. lock_rmap() then writes to freed vmalloc memory, leading to use-after-free and memory corruption. Because kvm_memslots_raw() suppresses lockdep checks, this race is entirely silent. Fix this by factoring out the 7 HPT hcall handlers (H_REMOVE, H_ENTER, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, H_BULK_REMOVE) into a helper function, kvmppc_pseries_do_hpt_hcall(), and wrapping its call site in srcu_read_lock(&kvm->srcu) / srcu_read_unlock(&kvm->srcu, idx). Targeting only the HPT hcalls avoids wrapping non-HPT hcalls that sleep (such as H_CONFER, H_REGISTER_VPA, H_PAGE_INIT) or handlers that already acquire SRCU internally (such as H_RTAS).

    Memory safety OS & kernel Linux

    unscored No fix listed
  45. CVE-2026-99472

    In the Linux kernel, the following vulnerability has been resolved: KVM: pfncache: use a dedicated invalidation sequence for cache refresh The gfn_to_pfn_cache refresh path guards against mmu notifier invalidations which complete while it has dropped gpc->lock for the HVA->PFN lookup: hva_to_pfn_retry() samples kvm->mmu_invalidate_seq and retries if it changed, or if mn_active_invalidate_count is still elevated. That is insufficient for HVA-based caches. mmu_invalidate_seq is only advanced by kvm_mmu_invalidate_end() when the invalidated range overlaps a memslot, and an HVA-based cache (e.g. the Xen shared_info page mapped with KVM_XEN_ATTR_TYPE_SHARED_INFO_HVA) need not be backed by any memslot at all. An invalidation of the cached HVA which starts and ends entirely within the lookup window is thus invisible to the retry check: mn_active_invalidate_count is back to zero and the sequence never moved. The refresh then publishes a mapping of a page which has already been freed, and the next reader dereferences it: BUG: KASAN: use-after-free in kvm_xen_shared_info_init+0x3c6/0x440 Read of size 4 at addr ffff8880599c2900 by task syz.2.383/7257 Since gfn_to_pfn_cache_invalidate_start() deliberately skips caches which are not currently valid (including one whose refresh is in progress, as the refresh clears the valid flag before dropping the lock), the retry check is the only line of defence, and it must fire for *any* invalidation, not just those hitting a memslot. Add a dedicated kvm->gpc_invalidate_seq, incremented by every kvm_mmu_notifier_invalidate_range_end() under mn_invalidate_lock before mn_active_invalidate_count is decremented, and check it in hva_to_pfn_retry() instead of mmu_invalidate_seq. Incrementing in range_end() in the same critical section as the in-progress count also closes the variant where the cache is activated with the contested HVA only after invalidate_range_start() has run. The same bug is also reachable through the per-vCPU vcpu_info cache (KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO_HVA), where the stale mapping is then dereferenced by kvm_setup_guest_pvclock() on the next KVM_RUN: BUG: KASAN: use-after-free in kvm_setup_guest_pvclock+0x5bf/0x660 This intentionally makes refresh retry on *unrelated* mmu notifier events; restoring precision (and reworking the GPC locking more generally) is left for a subsequent series. Reproducers: https://david.woodhou.se/xen_shinfo_race.c https://david.woodhou.se/vcpu_info_race.c

    Memory safety OS & kernel Linux

    unscored No fix listed
  46. CVE-2026-99473

    In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Gracefully handle xarray errors when binding a memslot If inserting a memslot into a guest_memfd's bindings xarray fails, propagate the error back to the caller, i.e. fail memslot creation as well. Signalling success and continuing on with memslot creation results in use-after-free, as the guest_memfd instance will remain reachable via the memslot after the file is freed (kvm_gmem_release() won't nullify the file pointer due to lack of a valid binding). Opportunistically WARN and reject binding if KVM_MEMSLOT_GMEM_ONLY is already set, partly to guard against goofs elsewhere, but mostly so that KVM doesn't need to worry about clobbering flags when unwinding on failure. Regarding the unwind, the slot must be fully prepared before inserting it into the bindings, at which point the slot becomes reachable. I.e. waiting to update the slot in order to avoid the ugly unwind isn't an option. And as part of the unwind, explicitly nullify the relevant bindings, as xarray can store a subset of entries when populating a range.

    Memory safety OS & kernel Linux

    unscored No fix listed
  47. CVE-2026-99474

    In the Linux kernel, the following vulnerability has been resolved: HID: hiddev: keep state alive through disconnect unlock mutex_unlock() clears the mutex owner before taking its wait lock. A thread spinning in the final hiddev file release can acquire existancelock after hiddev_disconnect() clears the owner, then free hiddev before the disconnecting thread reaches the mutex wait lock. This causes a use-after-free in the mutex slow unlock path. Give the connection and each open file an explicit reference. Drop each reference only after its existancelock critical section has completed, so neither unlock path can free the mutex while the other is still using it.

    Memory safety OS & kernel Linux

    unscored No fix listed
  48. CVE-2026-99460

    In the Linux kernel, the following vulnerability has been resolved: mptcp: hold MP_JOIN msk ref when cloning reqsk TCP request migration clones pending request sockets with inet_reqsk_clone(). For MPTCP MP_JOIN requests this byte-copies subflow_req->msk, but the clone does not own a reference. The original and cloned requests can consequently drop the same msk reference, leaving one request with a dangling pointer. This manifests as a KASAN slab-use-after-free in subflow_req_destructor(): BUG: KASAN: slab-use-after-free in subflow_req_destructor (net/mptcp/subflow.c:45) Write of size 4 at addr ff1100010e008d40 by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5-00353-gc27e36054537 #10 PREEMPT(full) Call Trace: subflow_req_destructor (net/mptcp/subflow.c:45) subflow_v4_req_destructor (net/mptcp/subflow.c:694) __reqsk_free (net/ipv4/inet_connection_sock.c:906) reqsk_timer_handler (include/net/request_sock.h:137 net/ipv4/inet_connection_sock.c:1147) Allocated by task 10014: sk_prot_alloc (net/core/sock.c:2246) sk_clone (net/core/sock.c:2488) mptcp_sk_clone_init (include/net/sock.h:1848 net/mptcp/protocol.c:3564) subflow_syn_recv_sock (net/mptcp/subflow.c:883) tcp_check_req (net/ipv4/tcp_minisocks.c:934) Freed by task 0: slab_free_after_rcu_debug (include/linux/kasan.h:235 mm/slub.c:2677 mm/slub.c:6439) rcu_core (kernel/rcu/tree.c:2645 kernel/rcu/tree.c:2897) Last potentially related work creation: kmem_cache_free (mm/slub.c:2638 mm/slub.c:6377 mm/slub.c:6504) __sk_destruct (net/core/sock.c:2289 net/core/sock.c:2391) sk_destruct (net/core/sock.c:2419) __sk_free (net/core/sock.c:2430) sk_free (net/core/sock.c:2441) mptcp_close (include/net/sock.h:2020 net/mptcp/protocol.c:3399) inet_release (net/ipv4/af_inet.c:442) The buggy address belongs to the cache MPTCP of size 2968 The buggy address is 128 bytes inside a freed 2968-byte region A non-NULL subflow_req->msk means that the request owns one reference. The third ACK can concurrently transfer the original request reference to the child and release it, so taking an unconditional hold on the copied pointer is unsafe. MPTCP sockets use SLAB_TYPESAFE_BY_RCU and all current inet_reqsk_clone() callers run in an RCU read-side critical section. Document and lockdep-check that calling-context requirement. Read the pointer from the original request and acquire a reference only if it is still live. Use refcount_inc_not_zero_acquire() so the subsequent ownership validation cannot be reordered before the try-get, then re-read the original request to verify that it still owns the same msk. If either check fails, clear the clone pointer; otherwise its normal destructor balances the new reference. Mark the ownership-transfer store with WRITE_ONCE() to match the lockless reads. The following patch completes the clone fixup for MP_CAPABLE token ownership. Both patches carry the same Fixes tag and are required for stable backports.

    Memory safety OS & kernel Linux

    unscored No fix listed
  49. CVE-2026-99461

    In the Linux kernel, the following vulnerability has been resolved: mm: khugepaged: fix swap entry value to folio_pfn() Patch series "mm: khugepaged: fix tracepoint UAF", v5. The khugepaged tracepoints take a folio pointer and call folio_pfn(), but by then the folio may no longer be valid: freed after folio_put(), folio_unlock() or pte_unmap_unlock(), or not a folio at all but an xarray-encoded swap entry. On classic SPARSEMEM, dereferencing it oopses khugepaged as soon as the trace event is enabled; on other memory models it merely prints a bogus pfn. Pass the pfn to the tracepoints directly, captured while the folio is still pinned, closing the use-after-free windows in mm_khugepaged_scan_file(), mm_khugepaged_scan_pmd() and mm_khugepaged_collapse_file(). This patch (of 3): When the swap entries found exceed max_ptes_swap, the loop is left via break with folio still holding the xarray value that encodes the swap entry, not valid folio pointer. That value is passed to trace_mm_khugepaged_scan_file(), which feeds it to folio_pfn(). On FLATMEM and SPARSEMEM_VMEMMAP, the page_to_pfn() is plain pointer arithmetic, so the trace event merely prints bogus scan_pfn. On classic SPARSEMEM, the page_to_pfn() reads page->flags, dereferencing the tiny encoded integer and oopsing khugepaged whenever the trace event is enabled. So when folio is the swap entry value, simply set pfn to -1, just like exhausted scan naturally. And the folio_put() has maybe dropped the last reference of folio. The trace_mm_khugepaged_scan_file() is left with a dangling folio pointer. so using the folio_pfn() before dropping the reference, closing use-after-free window.

    Memory safety OS & kernel Linux

    unscored No fix listed
  50. CVE-2026-99462

    In the Linux kernel, the following vulnerability has been resolved: mm/truncate: look up the end-edge straddler by index In truncate_inode_partial_folio(), after the first split at the start edge, folio_split() unlocks and drops the refcount of the after-split sub-folios. The sub-folio straddling the end of the truncation range is therefore unlocked and only transiently ref'd in the page cache while the code still derives it from a page pointer inside the original folio. Between the first split finishing and page_folio() resolving split_at2, that tail page can be reclaimed, freed and reallocated as a new large folio in the same mapping at a different file offset. folio2 then points at a folio that does not cover the end boundary, yet folio2->mapping == folio->mapping still holds, so the stale pointer passes the mapping check and folio_split_or_unmap() splits a folio at a wrong position (or, with a transient refcount, a use-after-free window opens between try_get and the split). __folio_split()'s own folio != page_folio(split_at) check cannot catch this either since split_at2 has been reallocated as part of the new folio, so page_folio(split_at2) resolves back to folio2. Look the straddler up by its page index instead. __filemap_get_folio() returns the folio currently covering the boundary, ref'd and locked, with the mapping validated under the lock, so the split target is always the real folio at the end edge.

    Memory safety OS & kernel Linux

    unscored No fix listed