CVE-20XX-?
agent?

The internet is broken right now.

66 critical CVEs without a fix in the last 48 hours. Developers are crying quietly into their IDEs. 145 more already have a fix that someone still has to apply.

2,043 CVEs · updated 2026-11-19 03:53 UTC

Reset all
  1. CVE-2026-99106

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: free the userptr ranges when a CS fails after parser_bos amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of the BO list and looks up the user pages. Those ranges are only freed when amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks them under the notifier lock. If amdgpu_cs_patch_jobs(), amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of amdgpu_cs_submit() fails, nothing frees them: neither amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e->range. Each such CS then leaks the range, its hmm_pfns array (8 bytes per page of the userptr BO) and the BO reference the range holds. An IB on a ring that patches the CS in place (e.g. VCN) with an unmapped va_start fails in amdgpu_cs_patch_ibs() and takes this path. Free the ranges on those error paths. Ranges amdgpu_cs_submit() already dropped are NULL, so freeing them again is a no-op. (cherry picked from commit c52a9542ed7cfd527feb938bd0accada2ac8d267)

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-112557

    The issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A malicious application may be able to bypass Privacy preferences.

    Auth & access OS & kernel Apple macOS

    5.5 MEDIUM 0.2% exploit odds Fix listed
  3. CVE-2026-99026

    In the Linux kernel, the following vulnerability has been resolved: net: team: free skb when broadcast has no txable port bc_transmit() sends the original skb through the last txable port. When no port is txable, it returns false without consuming the skb, but team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the skb and its socket write-memory charge. A TX-enabled, link-down port keeps the broadcast transmit op installed. Carrier can stay up through a second link-up, TX-disabled port or be forced on by userspace. Free the original skb on the no-port path while leaving the existing drop accounting intact. Discovered by Sashiko during review of previous commit.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-98993

    In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  5. CVE-2026-98957

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: disable rx napi when removing device Unloading the mt7915e module with a MT7916 triggers multiples WARN in __netif_napi_del_locked() and in page_pool_disable_direct_recycling() because the driver does not disable the napi before destroying it. This is troublesome since on MT7916 it is required to unload the module and reinsert it with a different enable_6ghz parameter to change the frequency. The system generally becomes unstable after reinserting the module. Fix it by disabling rx napi inside mt7915e itself, even through napi rx is enabled in the mt76 generic code. Disabling it in the mt76 generic code was previously attempted and reverted because napi was disabled too late and rx handlers could access freed structures. Note that the tx side is enabled and disabled by the mt76 generic code. It is disabled in mt7915_stop_hardware() since, unlike mt7915_unregister_device(), is it also called in the probe path if an error happens after rx napi is enabled.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  6. CVE-2026-98953

    In the Linux kernel, the following vulnerability has been resolved: devlink: fix devlink_rel reference leak when notify work is pending devlink_rel_nested_in_notify_work_schedule() takes a reference on the devlink_rel for the notify work and then queues the work, ignoring the return value of schedule_delayed_work(). If the work is already pending, nothing new is queued, the work runs only once and drops only one reference, so the extra one is leaked together with the devlink_rel and its index in devlink_rels. This is easy to hit. devl_register() of a nested instance queues the work, and if the instance is unregistered before the work has run, devlink_rel_put() queues it again while it is still pending. The work also keeps rescheduling itself for as long as the parent devlink lock cannot be taken, which widens the window. Registering and unregistering a nested devlink instance 100 times while holding the parent lock leaks all 100 devlink_rel objects. The reschedule path in devlink_rel_nested_in_notify_work() has the same problem: if the work was queued again while it was running, the reference it holds is never dropped. Drop the reference in both places when the work was already pending. The pending work holds its own reference, so this can not be the last one.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-98944

    In the Linux kernel, the following vulnerability has been resolved: HID: steam: Refactor registration This refactors and simplifies the registration/unregistration flow. Since we now only perform registration when the client isn't opened anymore, the logic for handling that can be removed, and the rest of the function streamlined. We also remove the previous assumption that we have a serial number to show we're registered, replacing it with a single purpose boolean. In a previous refactor the code for unregistering a battery if later registration steps failed was accidentally left out. As a result, a lingering power_supply object could get left over after the steam object was torn down. This is also fixed here.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  8. CVE-2026-42056

    Stack-based buffer overflow for some Intel(R) Wireless Bluetooth(R) within Ring 0: Kernel may allow a denial of service. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Memory safety OS & kernel

    6.0 MEDIUM 0.2% exploit odds No fix listed
  9. CVE-2026-40433

    Heap-based buffer overflow for some Intel(R) PROSet Wireless Wi-Fi Software for Windows within Ring 0: Kernel may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent network access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (high) and availability (high) impacts.

    Memory safety OS & kernel

    8.5 HIGH 0.2% exploit odds No fix listed
  10. CVE-2026-90590

    The NXP ENET QoS Ethernet driver in drivers/ethernet/eth_nxp_enet_qos serialises transmission with a binary semaphore, data->tx.tx_sem, taken in eth_nxp_enet_qos_tx() and returned only by the transmit-completion interrupt handler tx_dma_done(). A frame that has been handed to the transmit DMA when the Ethernet link goes down is never written back, so that completion interrupt never arrives. The PHY callback eth_nxp_enet_qos_phy_cb() reacts to carrier loss only by calling net_eth_carrier_set(); it does not stop the DMA, take the descriptors back or release the outstanding frame, and no timeout exists to do so. The trigger is a link-down/link-up transition that lands while a frame is under the transmit DMA. It can be produced by anyone who controls the link partner or the cable — for example by administratively downing and restoring the attached switch port, or by restarting auto-negotiation from a peer device — and can be made reliable by generating traffic that keeps the device transmitting and repeating the transition. No credentials or user interaction are required, and the trigger is at the link layer rather than over IP. Because the semaphore is never given back, every subsequent call to eth_nxp_enet_qos_tx() fails with -EBUSY for the remaining life of the boot; restoring the link does not recover the interface, since the link-up path only rewrites MAC_CONFIGURATION. The affected interface continues to receive but can no longer transmit anything — no ARP replies, no TCP acknowledgements, no DHCP renewals — until the device is reset. The net_pkt and the net_buf fragments of the abandoned frame are likewise never unreferenced and never return to their pools. The security-relevant property is persistence: a momentary link flap leaves the interface permanently unable to send, so the denial of service outlasts the attacker's access to the link. There is no confidentiality or integrity impact. The fix adds a claim/release pair around the outstanding packet so that completion and abandonment are mutually exclusive, aborts an outstanding frame from the PHY callback on carrier loss (stopping the DMA, flushing the MTL transmit queue and reinitialising the descriptor ring), and arms a transmit watchdog, CONFIG_ETH_NXP_ENET_QOS_TX_TIMEOUT_MS, so that any non-completing DMA — not only a carrier loss — reclaims the transmit slot and the packet.

    Denial of service OS & kernel

    6.5 MEDIUM 0.2% exploit odds Fix listed
  11. CVE-2026-105422

    Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute pardus-boot-repair allows Path Traversal. This issue affects pardus-boot-repair: from 1.0.9 before 1.1.0.

    Disclosure OS & kernel

    6.6 MEDIUM 0.2% exploit odds No fix listed
  12. CVE-2026-112656

    An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. Processing a maliciously crafted font may result in the disclosure of process memory.

    Memory safety OS & kernel Apple Ipados

    3.3 LOW 0.2% exploit odds Fix listed
  13. CVE-2026-112539

    A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A malicious app may be able to read or write to protected files.

    Disclosure OS & kernel Apple macOS

    7.1 HIGH 0.2% exploit odds Fix listed
  14. CVE-2026-99018

    In the Linux kernel, the following vulnerability has been resolved: riscv: entry: gate shadow call stack reload on sstatus.SPP, not tp Under CONFIG_SHADOW_CALL_STACK, handle_exception() reloads the kernel shadow call stack pointer (gp) only when the trap came from userspace. It made that decision with scs_load_current_if_task_changed, which compares the trap-time tp (read back from sscratch into s5) against the current tp: beq \prev, tp, _skip_scs scs_load_current _skip_scs: tp is a user-writable register. A user task that sets tp to the linear-map address of its own task_struct (&current) before trapping makes the comparison succeed (can achieve by brute force with KASLR enable under our test), so the kernel skips scs_load_current and keeps running with the gp that userspace left in place. Under CONFIG_SHADOW_CALL_STACK gp is the shadow call stack pointer and load_global_pointer is a no-op, so the compiler-emitted "sd ra, -8(gp)" / "ld ra, -8(gp)" in every non-leaf function then write to, and return through, an attacker-controlled address -- an unprivileged kernel arbitrary-write and control-flow-hijack primitive. The poisoned gp is saved to task_struct.scs_sp on return, so the reload is skipped on every subsequent entry as well. Decide "came from userspace" from the hardware sstatus.SPP bit (already in s1 at this point) instead of from tp, mirroring the check that ret_from_exception already uses a few instructions later. SPP is written by hardware on trap entry and cannot be forged from U-mode. Legitimate behaviour is unchanged: user entries (SPP=0) reload the task shadow call stack, nested kernel entries (SPP=1) skip it.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  15. CVE-2026-98980

    In the Linux kernel, the following vulnerability has been resolved: namei: don't reveal overmounted entries in refwalk In rcuwalk the dentry is validated before it is accepted. step_into() step_into() rechecks d_seq and __follow_mount_rcu() rechecks mount_lock. An entry that gets unlinked in between causes the lookup to retry and miss. A refwalk doesn't do this. lookup_fast() takes a reference on the hashed dentry and simply accepts it. So an unlink that happens after the reference was taken isn't seen by refwalk. That's fine for a simple file. We just happened to open it before it was unlinked, no problem. For a mountpoint and specifically a locked mountpoint it very much isn't. The unlink detaches all mounts and then removes the name. Any refwalk that hasn't traversed the mounts yet simply reveals the underlying entry. It's a very narrow window but it can be hit: reads of a covered file in 60 s, 3 walkers, ~15000 unlinks no widening 27 that step + 200 us 3741 See the appended patch for a more reliable reproducer. So check the entry after step_into(). unlink(), rmdir() and rename() mark the dentry with dont_mount() before they detach the mounts and remove the dentry. So a dentry that is marked with DCACHE_CANT_MOUNT and is unhashed by the time its mounts were looked at is a name that was unlinked under the refwalk. DCACHE_CANT_MOUNT is read after the mounts were looked up and it is set before they are detached by detach_mounts(). A refwalk that missed the mounts will see DCACHE_CANT_MOUNT. Plain d_unlinked() is fine. A rename takes the dentry off its hash chain but ___d_drop() leaves d_hash.pprev set. So only __d_drop() and a rename over the dentry unhash it. The only move that flips IS_ROOT splices in a disconnected alias. That doesn't have DCACHE_CANT_MOUNT set. Add the to step_into_slowpath(). ".." and LOOKUP_DOWN may legitimately land on an unhashed directory. A refwalk that crossed onto a mount has path.mnt different from nd->path.mnt. A dentry that a filesystem dropped on its own (d_invalidate(), d_drop()) doesn't have the flag set and is treated as before. // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against walkers that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 while there is none */ static atomic_long n_unlink, n_walk, n_mark, n_enoent, n_othe ---truncated---

    Disclosure OS & kernel

    8.8 HIGH 0.2% exploit odds No fix listed
  16. CVE-2026-100081

    In the Linux kernel, the following vulnerability has been resolved: xen-netback: defer xenvif_mcast_addr_list_free() In order for the function to legitimately avoid locking/RCU, it needs to run after all TX/RX processing has finished/stopped: Lookups happen from xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action() (called out of xenvif_poll()). Move the call out of xenvif_disconnect_data() (the call to the function from connect()'s error path doesn't require any cleaning up there), and put it past the synchronization point in backend_disconnect(). This is XSA-527 / CVE-2026-100081.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  17. CVE-2026-99202

    In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix SMP IO deadlock during HA resume smp_execute_task_sg() calls pm_runtime_get_sync() on the host before issuing an SMP command. When that command is itself issued from the HA resume path, the get_sync() deadlocks: it waits for the ongoing resume (the device is RPM_RESUMING), while the resume is blocked in sas_drain_work() waiting for that same SMP IO to complete. The deadlock needs an expander-attached SATA disk. During sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata() -> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() -> sas_phy_reset() -> sas_smp_phy_control() -> smp_execute_task_sg()). Direct-attached SATA resets through lldd_control_phy() and SSP devices use TMFs, so neither hits this. Replace the get_sync()/put_sync() pair with pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only needs to hold off autosuspend while the SMP is in flight, and it must not try to resume the host: a sync resume issued from the HA resume path itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init has already reinitialized the hardware, so the device is accessible without one. The usage reference is still required. Discovery work normally runs inside an event worker's PM reference, taken at sas_notify_port_event() notify time and held until the handler has flushed the disco queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN from within the revalidation worker itself, and flush_workqueue() does not wait for work items queued during execution, so that chained revalidation runs with no outer PM reference - without the get_noresume(), its SMP could race autosuspend. For the BSG path, sas_smp_handler() is the only caller which may find the host autosuspended: expander SMP requests do not go through any SCSI device request queue, so nothing else in that path holds the host awake. Resume it there with pm_runtime_resume_and_get() and check the result.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  18. CVE-2026-99191

    In the Linux kernel, the following vulnerability has been resolved: calipso: keep BIG TCP payload_len in calipso_skbuff_setattr() calipso_skbuff_setattr() adjusts payload_len by the length of the option it inserts or resizes: payload = ntohs(ip6_hdr->payload_len); ip6_hdr->payload_len = htons(payload + len_delta); GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores payload_len == 0 for them; ipv6_payload_len() then falls back to skb->len. For such a packet forwarded to a destination mapped to CALIPSO, the code above writes len_delta (or 65536 + len_delta when shrinking) into payload_len, and ipv6_payload_len() no longer falls back to skb->len. nf_tables, conntrack and sch_cake rely on it. The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN, and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its real length back. Set payload_len from the skb length with ipv6_set_payload_len(), which stores 0 above IPV6_MAXPLEN and the real length otherwise, as ipv6_gro_complete() does. The network header was just reset to skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length. Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal mdp-generated policy (network_peer_controls=1), "netlabelctl calipso add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO DOI 16. calipso_skbuff_setattr() was called through netlbl_skbuff_setattr() from a test-only debugfs hook (not part of this patch) adding a level-only label; payload_len after the call: case before fix after fix real length 1000, unlabeled 1016 1016 1016 70000 GSO, payload_len 0 16 0 70016 65530 GSO, grows past MAXPLEN 10 0 65546 65540 GSO with a 24 byte hop header, shrinks below MAXPLEN 65528 65532 65532 1000 with a 24 byte hop header 992 992 992 (0 means ipv6_payload_len() returns the real length.) On the forward path, with a client injecting unlabeled UDP through a router to a server, the router adds the CALIPSO option and the server delivers all datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  19. CVE-2026-99182

    In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Fix shift-out-of-bounds for aggregated ALH capture When ch_count is smaller than blob->alh_cfg.device_count (e.g. a mono capture stream, such as a SmartMic, aggregated across multiple SDW links), step = ch_count / blob->alh_cfg.device_count truncates to 0. The subsequent GENMASK(step - 1, 0) then underflows step - 1 (u32) to UINT_MAX, causing GENMASK()'s internal shift to use an out-of-bounds exponent: UBSAN: shift-out-of-bounds in sound/soc/sof/ipc4-topology.c:2363:13 shift exponent 18446744069414584384 is too large for 64-bit type 'long unsigned int' Treat ch_count < device_count the same way as the existing "channels equal to output reference channels" case: apply the same ch_mask to every aggregated device instead of trying to split channels that can't be evenly divided.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-99187

    In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pmu_migrate_context() leaving events behind __perf_pmu_remove() walks the group leaders of a CPU and PMU with perf_event_groups_for_cpu_pmu(), removing each one as it goes. perf_remove_from_context() takes the leader out of the groups rbtree, after which rb_next() on that node returns NULL, prematurely ending the walk. Other groups stay behind in the source context. On CPU hotplug, they are then torn down with the dying CPU. They keep running until teardown, while the PMU's interrupt and migrated events are on a new CPU, which drivers rely on never happening. Walk ctx->event_list instead and pick out the PMU's events by their pmu_ctx.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-99178

    In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context An async #PF "page not present" event arrives through the #PF vector, and its reason sits in the per-CPU apf_reason.flags until __kvm_handle_async_pf() reads and clears it. If an NMI arrives after the event is injected and before the #PF handler reads the flags, and the NMI handler itself takes a #PF, that fault reads and clears the flags belonging to the #PF it interrupted. It then finds interrupts disabled in the NMI context it interrupted, and panics: Kernel panic - not syncing: Host injected async #PF in interrupt disabled region Call Trace: <NMI> panic+0x52/0x60 __kvm_handle_async_pf+0xb0/0xb0 exc_page_fault+0x71/0xb0 asm_exc_page_fault+0x27/0x30 RIP: 0010:__get_user_nocheck_8+0x6/0x20 perf_callchain_user+0x147/0x1a0 get_perf_callchain+0x12d/0x1c0 ... perf_event_nmi_handler+0x26/0x50 exc_nmi+0xe8/0x110 RIP: 0010:asm_exc_page_fault+0x0/0x30 </NMI> The last RIP line shows the NMI landing on the first instruction of the #PF entry. perf with user call chains takes such a fault: the sampling NMI walks the user stack with __get_user(), which faults when a saved frame pointer is not a valid user address or the walk runs off the top of the stack. The same window exists when KVM, running as an L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after a #PF VM-exit. The NMI entry code saves and restores CR2 for this nesting, but not the async #PF reason. Andy Lutomirski described the race, with perf as the example, when async #PF delivery was reworked in 2020 [1]. Saving and clearing the flags across the NMI, next to CR2, was discussed there but not merged. Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS, so the host delivers "page not present" only for user mode faults and a kernel-mode fault in NMI context (including kernel-mode #MC and #DB) cannot be an async page fault. In that case, return without touching the flags so that the interrupted handler finds them intact. Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot whose memory is served on demand through userfaultfd, so that reading it back takes async #PFs, while every thread samples hardware cycles with user call chains and points its frame pointer at an unmapped page. Without this patch the guest panicked as above in 3 of 3 runs. With it, the guest survived 3 of 3 runs of 60 seconds, and the host counted 148,441 to 153,334 kvm_async_pf_not_present events in the first 20 seconds of each. On 6.18.50 the results were the same: the guest panicked without the patch and survived with it.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  22. CVE-2026-99171

    In the Linux kernel, the following vulnerability has been resolved: ntfs3: free the sbi after a grace period If the "nocase" mount option ntfs3 uses custom hash and dentry compare functions. Both access ntfs3 superblock private information in rcu pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any rcu delay. A lookup that's still inside the filesystem when the last reference to the mount is dropped causes a UAF. With a pathwalk held up in ntfs_d_hash() while the last reference to the mount goes away: BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940 Read of size 8 at addr ff1100010453c850 by task walker/99 Call Trace: <TASK> ntfs_nls_to_utf16+0x752/0x940 ntfs_d_hash+0x22b/0x500 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 95: __kmalloc_cache_noprof+0x249/0x560 ntfs_init_fs_context+0x2db/0x5a0 alloc_fs_context+0x52e/0xc70 [...] Freed by task 98: kfree+0x1db/0x5b0 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 task_work_run+0x131/0x250 The bug is currently masked by the grace period in namespace_unlock() for umount(2). Keep the necessary information until the filesystem private info is freed and free it with an rcu delay. ntfs3_free_sbi() now runs from an rcu callback and drops the upcase table via ntfs_put_shared(). So switch s_shared_lock over to spin_lock_bh(). Otherwise the callback can deadlock against a task holding the lock on the same cpu.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-99172

    In the Linux kernel, the following vulnerability has been resolved: ipc: drop the mqueue mount with kern_unmount() on setup failure mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its ->mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain mntput(). With ->mnt_ns set that takes the fast path of mntput_no_expire(). The count drops to zero and nothing ever kills the mount, so the mount and the mqueue superblock are leaked. Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace") added the first failure path after mq_init_ns() and never dropped the mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on sysctl setup failure") tried to fix that with a mntput() but that doesn't help for a long-term mount. Use kern_unmount(). free_ipc() open-codes the same thing for a namespace that made it.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-99157

    In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after the 40-byte header and writes 8 bytes past the end of the buffer. Let each BSG transport pass its reply buffer size to bsg_setup_queue() and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-99147

    In the Linux kernel, the following vulnerability has been resolved: drm/exec: don't immediately add prelocked obj to array of locked objs When a contention is detected the drm_exec object grabs a reference to the contended object, unlocks all other objects and pre-locks the contended one before anything else. The problem is that it is possible that this pre-locked object was about to be destroyed and drm_exec is now holding the last reference to it. So we never actually see this pre-locked object again to be explicitly locked and so also never reserve a slot for a dma_fence object on it. Should the driver now use drm_exec_for_each_locked_object() to add a new fence to all locked objects we eventually see a warning or even a BUG_ON() to prevent random memory corruption. Fix this by keeping the prelocked object out of the array of locked objs until it was explicitly mentioned by the driver again. If the prelocked object is never mentioned again by the driver just unlock and drop the reference at the end of the locking loop.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-99120

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Cope with the SS bit being set in #NPF exit codes When running Hyper-V from Windows 11, KVM is seeing the SS bit set in nested page fault error codes produced for shadowed NPT. The AMD manual is unclear about when SS is set, including whether it can be set when SupervisorShadowStackEn (bit 6) is not set in the MISC_CTL field of the VMCB. Nevertheless, the unexpected SS bit causes out of bounds accesses in permission_fault(), seen as either WARNs or UBSAN reports: kernel: UBSAN: array-index-out-of-bounds in arch/x86/kvm/mmu.h:225:27 kernel: index 34 is out of range for type 'u16 [16]' (in this case, the page fault error code is 34*2=0x44, i.e. SS|U; the report shows SS|U|W happening as well). Fix the handling of unknown error codes by dropping SS and (with a WARN) any bits not among those that permission_fault() expects to receive. At the same time, given the uncertainty about when hardware sets SS, follow the processor's behavior when constructing the fault's error code, and preserve the SS bit as passed to FNAME(walk_addr_generic). While the behavior is surprising, there's a possibility that Hyper-V expects it (Hyper-V does not even enable CET unless it finds MBEC/GMET!), so retain the information when reflecting the fault to L1 instead of unconditionally discarding it. Bisection shows that this started happening with commit 687ee95c1b6d ("KVM: nSVM: enable GMET for guests"), even though SHSTK was available to guests since Linux 6.18. However, this is not because bit 1 of MISC_CTL (GMET) somehow enables reporting the SS bit; rather, it's simply that Hyper-V never uses CET unless GMET is also present. The WARN is reproducible even with gmet=0, with some hacking of kvm-unit-tests's cet.c testcase to ensure that the first access to the shadow stack triggers a page fault.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-98986

    In the Linux kernel, the following vulnerability has been resolved: namespace: remove the fsnotify marks of a mount namespace in process context mnt_ns_release() drops the last passive reference of a mount namespace and removes its fanotify marks via fsnotify_mntns_delete(). That takes the mutex of every group with a mark on the namespace and the spinlock of the connector. Fine from process context. But mnt_ns_tree_remove() hands the reference the namespace was allocated with to call_rcu() and so the marks are removed from the RCU softirq: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:623 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3 __mutex_lock+0x113/0x24b0 fsnotify_destroy_marks+0x11b/0x3d0 mnt_ns_release_rcu+0x57/0xa0 rcu_core+0x6b6/0x1e40 and lockdep complains about the connector lock being taken from softirq context. A fanotify group with a FAN_MARK_MNTNS mark on the mount namespace of another task is all that's needed. Root in a user namespace can do that for a mount namespace it owns. The task exits and the namespace is freed with the mark still on it. Remove the marks in free_mnt_ns() before the namespace is handed to RCU. That runs in process context once the last active reference is gone. A mark is added through a file descriptor to the namespace which holds an active reference so no mark can show up after that.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-98958

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: account non-AQL frames per peer rather than per link The driver increments wcid->non_aql_packets when a frame goes to the hardware queue. The completion path decrements the counter again. For an MLO peer, the hardware reports the completion on the link that it used for the transmission. This link can differ from the link that the driver queued the frame on. In that case, the increment and the decrement go to different link wcids, and the count drifts upwards until it blocks the station. Keep the count on the wcid of the primary link, like the other peer-wide state.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-98962

    In the Linux kernel, the following vulnerability has been resolved: btrfs: free iov when btrfs_uring_read_extent() fails After btrfs_uring_read_extent(), the caller always jumped to out_acct. That skips kfree(data->iov), which is only correct for -EIOCBQUEUED where the deferred path owns the iov. On failure, fall through to out_free instead.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-98963

    In the Linux kernel, the following vulnerability has been resolved: btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio If all bios finish before btrfs_encoded_read_regular_fill_pages() returns, it calls btrfs_uring_read_extent_endio() and previously returned the I/O status. A negative errno then made btrfs_uring_read_extent() unlock and free while btrfs_uring_read_finished() did the same again. Return -EIOCBQUEUED so only the deferred path cleans up.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-98919

    In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has several corner-case issues flagged during review: 1. If xe_gt_clock_init() failed to recognise the crystal clock, gt->info.timestamp_base is 0, which makes idledly_units_ps also 0. The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a divide-by-zero and panics the kernel. 2. The tick-to-ns conversions are done in u32: idledly * idledly_units_ps, (maxcnt - 1) * 1000 Both overflow u32 before DIV_ROUND_CLOSEST() sees them. 3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32. 4. The register only stores whole ticks, so the clamped ns value has to be converted to ticks and back. DIV_ROUND_CLOSEST() can round that conversion up past maxcnt: maxcnt = 640 ns, one tick = 666664 ps clamp: maxcnt - 1 = 639 ns ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick tick -> ns: 1 * 666664 / 1000 = 667 ns 667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640), so xe_gt_WARN_ON() fires again on every subsequent init. Return early if timestamp_base is 0 (the unknown-crystal path). Do the conversions in u64 via the *_ULL() helpers so they cannot wrap. Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is cleared. v2: Drop the redundant warn on the timestamp_base == 0 path; xe_gt_clock_init() already warns on an unrecognised crystal clock. Keep the early return to avoid the divide-by-zero. - Vinay v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...) instead of writing the raw tick count, which could clobber INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the inhibit-switch clear from the maxcnt clamp so a set inhibit bit no longer forces a needless delay overwrite when the delay itself is already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt). (cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-98910

    In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unwind debug trap enable on copy_to_user failure If kfd_dbg_trap_enable() fails while copying runtime_info to userspace, it had already activated the trap, set debug_trap_enabled, taken an extra process reference, and opened the debug event file. Return -EFAULT without unwinding that state, leaving inconsistent trap state and a refcount imbalance that could break later DISABLE/ENABLE. On copy_to_user failure, deactivate the trap and undo the rest of the enable setup before returning.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-98913

    In the Linux kernel, the following vulnerability has been resolved: net: thunderx: fix PTP device ref leak in nicvf_probe() cavium_ptp_get() acquires a reference to the PTP PCI device through pci_get_device(). If any initialization step fails after cavium_ptp_get(), the PTP PCI device reference is leaked. Add a common error path to release the PTP reference before returning from probe failures.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-98915

    In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: use vb2_video_unregister_device on driver removal The driver uses vb2_fop_release() as its file release operation, so vb2_video_unregister_device() should be used instead of video_unregister_device() during driver removal. This ensures that the vb2 queue is properly disconnected before the video device is unregistered.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-98901

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix lease break and ack state handling Do not skip valid lease states containing WRITE_CACHING when breaking level-II/read leases for writes and truncates. Handle lease break acknowledgments according to the SMB2 rule that the acknowledged state must be a subset of the server's break target. Apply the acknowledged state directly and keep the break pending on failed ACKs.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-98908

    In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: clean up PSFP resources on flower setup failure sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and stream filter resources before adding VCAP actions. If a later step fails, the resources allocated earlier in the function are not unwound. Add error paths to release the stream filter, flow meter and stream gate when setup fails after they have been acquired. Also make sparx5_psfp_fm_add() return the acquired flow-meter id before the existing-flow-meter early return. When an existing flow meter is reused, sparx5_psfp_fm_get() increments its pool reference count, but the caller previously kept psfp_fmid as 0. If a later setup step failed, the error path could try to delete flow-meter id 0 instead of the reused flow meter, leaving the incremented reference behind.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-98880

    In the Linux kernel, the following vulnerability has been resolved: ntfs3: handle set_blocksize failures ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99308

    In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-120808

    An issue exists in MongoDB's macOS TLS client implementation where certificate chain-of-trust validation is bypassed for outbound connections to IPv6-addressed peers. When a MongoDB process using the Apple SecureTransport TLS backend connects to an IPv6 target, the trust evaluation result from SecTrustEvaluate is silently discarded, regardless of whether the peer's certificate is trusted. An on-path party could exploit this by presenting a self-signed certificate containing the target's IPv6 address in the Subject Alternative Name to intercept and modify encrypted inter-node or external service traffic. This issue only affects MongoDB processes running on macOS with the Apple SecureTransport TLS provider.

    Crypto OS & kernel

    9.1 CRITICAL 0.2% exploit odds No fix listed
  40. CVE-2026-16511

    Two RTIO syscall verifiers, in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0), did not validate user-supplied pointers before the kernel wrote through them. z_vrfy_rtio_sqe_cancel() performed no validation at all. It passed the caller's struct rtio_sqe pointer straight to z_impl_rtio_sqe_cancel(), which converts it with CONTAINER_OF to a struct rtio_iodev_sqe, ORs RTIO_SQE_CANCELED (BIT(3)) into its 16-bit flags field in supervisor mode, then loads its next pointer and repeats until that pointer is NULL. The syscall takes no RTIO context argument, so it needs no object grant: any user-mode thread on a CONFIG_USERSPACE build can set that bit in a 16-bit word at an address of its choosing in kernel memory, and the kernel continues the write along whatever pointer chain it finds at the corresponding offset. Setting chosen bits in kernel data structures, such as object permission or thread state fields, can be used to escalate privilege from user mode. z_vrfy_rtio_sqe_copy_in_get_handles() validated its RTIO context and the input SQE array, but only NULL-checked the handle out-parameter before writing a kernel SQE pointer through it, with no K_SYSCALL_MEMORY_WRITE check. A user thread that holds a granted RTIO context can therefore make the kernel store a pointer value at an arbitrary address. The fixes validate the handle out-parameter as writable, bound the cancel handle to real submission-pool storage, and require permission on the RTIO context that owns the matching pool. Without that last check a bounded handle still let any user thread cancel submissions belonging to other contexts, silently aborting their I/O. Systems built without CONFIG_USERSPACE or without CONFIG_RTIO are unaffected.

    Memory safety OS & kernel

    8.8 HIGH 0.2% exploit odds Fix listed
  41. CVE-2026-99219

    In the Linux kernel, the following vulnerability has been resolved: ftrace: Initialize modname and offset in print_rec() print_rec() leaves 'modname' and 'offset' uninitialized and kallsyms_lookup() only sets them on success. When the lookup fails like when a module is being loaded or unloaded, 'modname' holds a garbage value, passes the 'if (modname)' check, and is dereferenced by seq_printf(). Oops: general protection fault RIP: 0010:string+0x48/0xe0 Call Trace: vsnprintf+0x1f5/0x650 seq_printf+0x8e/0xb0 print_rec+0x6c/0xc0 t_show+0x4c/0x440 seq_read_iter+0x119/0x480 This can be triggered by reading available_filter_functions while a module is being loaded or unloaded. Initialize both variables so a failed lookup skips the module name.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-99139

    In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free in do_tcp_getsockopt(TCP_CONGESTION) do_tcp_getsockopt() reads icsk->icsk_ca_ops->name without holding rcu_read_lock(). Since commit 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf"), icsk_ca_ops can point to dynamically allocated BPF struct_ops memory that may be freed concurrently via setsockopt(TCP_CONGESTION), leading to a use-after-free. BUG: KASAN: slab-use-after-free in _copy_to_user+0x37/0x60 Read of size 16 at addr ffff888013505260 by task exploit/149 _copy_to_user+0x37/0x60 do_tcp_getsockopt+0x158a/0x2460 (net/ipv4/tcp.c:4585) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by holding rcu_read_lock() around the ca_ops->name access, using READ_ONCE() to load icsk_ca_ops, and copying the name to a stack buffer before releasing the lock. Also annotate the relevant icsk_ca_ops stores with WRITE_ONCE() to fix the accompanying KCSAN data-race issue.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-99140

    In the Linux kernel, the following vulnerability has been resolved: tracing: Fix hist trigger timestamps for buffered events Syzkaller triggered a WARN_ON_ONCE(!nest) warning: WARNING: kernel/trace/ring_buffer.c:821 at ring_buffer_event_time_stamp Call trace: ring_buffer_event_time_stamp hist_field_timestamp hist_fn_call event_hist_trigger event_triggers_call __event_trigger_test_discard trace_event_buffer_commit do_trace_event_raw_event_sched_switch trace_event_raw_event_sched_switch The warning is probabilistically reproducible and is related to syzkaller executing the following commands: echo 'prev_pid == 999999' > events/sched/sched_switch/filter echo 'hist:keys=common_timestamp' > events/sched/sched_switch/trigger The specific triggering process is as follows: CPU 0 CPU 1 (context switching) (echo 'hist:keys=common_timestamp' > \ events/sched/sched_switch/trigger) do_trace_event_raw_event_##call trace_event_buffer_lock_reserve if (!tr->no_filter_buffering_ref && trace_file->flags & EVENT_FILE_FL_FILTERED) return entry; // return directly event_hist_trigger_parse hist_register_trigger tracing_set_filter_buffering(file->tr, true); tr->no_filter_buffering_ref++; __trace_buffer_lock_reserve rb_start_commit local_inc(&cpu_buffer->committing); // skipped and not executed trace_event_buffer_commit __event_trigger_test_discard event_triggers_call event_hist_trigger hist_fn_call hist_field_timestamp ring_buffer_event_time_stamp nest = local_read(&cpu_buffer->committing); WARN_ON_ONCE(!nest) // trigger warning The root cause is that when an event file has a filter attached and the hist trigger has not yet been attached, trace_event_buffer_lock_reserve() writes the event into the per-CPU trace_buffered_event temp buffer instead of reserving it in the ring buffer, so cpu_buffer->committing is not incremented. When the event is later processed at commit time by a hist trigger, hist_field_timestamp() -> ring_buffer_event_time_stamp() sees a zero committing count, triggering WARN_ON_ONCE(!nest). tracing_event_time_stamp() was added by commit d8279bfc5e959 ("tracing: Add tracing_event_time_stamp() API") for exactly this case: if the event is the per-CPU trace_buffered_event, it returns the current ring buffer timestamp. But it never gained a caller. Use it in hist_field_timestamp(), so that a hist trigger that races onto a buffered event records the current time, which is only marginally later than when the event was recorded, instead of warning and recording a bogus timestamp.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-99127

    In the Linux kernel, the following vulnerability has been resolved: page_pool: keep frag_offset aligned for odd-sized requests page_pool_alloc_frag_netmem() rounds the requested fragment size with size = ALIGN(size, dma_get_cache_alignment()); dma_get_cache_alignment() returns 1 unless the architecture defines ARCH_DMA_MINALIGN, which DMA-coherent architectures such as x86 do not. There the ALIGN() is a no-op and pool->frag_offset advances by the raw, unrounded size. A single caller asking for an odd size then leaves frag_offset misaligned for every fragment carved out of that page afterwards. The pool is shared, so the damage is not confined to the caller that caused it. The per-cpu system_page_pool used by generic XDP hits this. skb_pp_cow_data() allocates its fragments with the raw packet length: size = min_t(u32, len, PAGE_SIZE); truesize = size; page = page_pool_dev_alloc(pool, &page_off, &truesize); leaving frag_offset odd for whatever is carved out of that page next. Its own head allocation is already aligned -- SKB_HEAD_ALIGN(size) plus the XDP_PACKET_HEADROOM its callers pass -- so it is a later user of the shared pool that pays: page_pool_dev_alloc_va() returns a misaligned buffer, napi_build_skb() installs it as skb->head, and skb_shinfo(skb) == skb->head + skb->end is misaligned with it. skb_shinfo()->dataref is a 4-byte atomic_t at offset 0x20, so the atomic_inc() in __skb_clone() straddles a cache line. On x86 with split lock detection -- fatal for kernel split locks by default -- this panics the machine: Oops: Split lock detected RIP: 0010:skb_clone+0x154/0x1e0 Call Trace: <IRQ> raw_local_deliver+0x1ed/0x2c0 ip_protocol_deliver_rcu+0x54/0x1c0 ip_local_deliver_finish+0x85/0x100 ip_local_deliver+0x67/0x100 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x87/0x130 Reproduced by attaching any generic-mode XDP program to loopback and opening a RAW IPPROTO_UDP socket, which makes raw_local_deliver() clone every locally delivered UDP packet; ordinary DNS traffic then triggers it, roughly once per 2500 clones. Observed on 6.12.101 and 7.1.8. Tracing page_pool_alloc_frag_netmem() over one such run shows the amplification -- two odd-sized requests, nine misaligned offsets: requested size & 7: 0: 17035 5: 1 7: 1 frag_offset & 7: 0: 17028 3: 1 4: 1 5: 1 6: 1 7: 5 and skb_pp_cow_data() returning heads that were aligned on entry: head 0xffff8f4c86aeac00 -> 0xffff8f4c53a9a9c4 (&7=4) head 0xffff8f4d6a8a42c0 -> 0xffff8f4c4f7b7a45 (&7=5) Round the fragment size up to at least the alignment struct skb_shared_info requires, so fragments are always suitably aligned for the objects callers build on them. Architectures needing a larger DMA alignment keep it. This also makes the remainder computed in page_pool_alloc_netmem(), *size = max_size - *offset; aligned, since max_size is a power of two -- which fixes the matching misalignment of skb->end. Verified with a controlled A/B under QEMU/KVM: same tree, same config, same compiler, same rootfs and identical traffic, differing only by this patch. A SEC("xdp.frags") XDP_PASS program on lo plus UDP datagrams larger than max_head_size drives skb_pp_cow_data()'s fragment loop, which passes raw packet lengths to the pool. Measured at the return of skb_pp_cow_data(): unpatched patched skb_pp_cow_data calls 40800 40800 misaligned skb->head 1120 0 dataref at line offset >60 80 0 The last row counts the accesses that actually fault: skb_shinfo()->dataref sits at head+end+0x20 and is a 4-byte atomic, so `lock incl` splits a 64-byte cache line only when that address lands at offset 61..63. All 80 occurrences were at offset 61; the panic reported above was at offset 62. Eliminating the misalignment removes every one of them. Same class of bug as commit 3bed3cc4156e ("net: Do not allocate page fragments t ---truncated---

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-99115

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION, that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns FileSysIdentifier. Those eight bytes go to the client as they are found in the response buffer. The buffer is zeroed on allocation, so a standalone request leaks nothing. A compound request can leak: the offset of the next response is advanced by the length pinned for the previous one, so a reply that was written into the buffer and then dropped in favour of the short error response of smb2_set_err_rsp() stays there, and the next reply is laid over it with only the header cleared. Report the file system id statfs() returned, which is what the field is for. FileSysIdentifier is __le64 and f_fsid is a pair of ints, so assemble the value first, val[0] as the low half, and convert it on the way out.

    Disclosure OS & kernel

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-99113

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in smb2_get_info_filesystem() reports 64 bytes for FS_OBJECT_ID_INFORMATION, that is the whole of struct object_id_info, but writes only 46 of them: - objid[] is 16 bytes, and when the volume UUID is not available only sizeof(stfs.f_fsid) (8) bytes are copied into it; - extended_info.version_string[] is STRING_LENGTH (28) bytes, and only strlen("1.1.0") (5) bytes are copied into it. The response buffer is zeroed on allocation (kvzalloc() in smb2_allocate_rsp_buf()), so for a standalone request the remaining 31 bytes are zero. In a compound request they need not be. The offset of the next response is advanced by the length pinned for the previous one, so if a preceding command wrote its reply into the buffer and then failed, smb2_set_err_rsp() pins only the short error response and the next reply lands inside the area that has already been written. Only the header is cleared there: memset((char *)rsp_hdr, 0, sizeof(struct smb2_hdr) + 2); The client then receives up to 31 bytes of a response it was not meant to see, including one that failed with an access denied error. Clear the structure before filling it in. As a side effect version_string is now NUL terminated.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-99114

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION, that is the whole of struct smb2_fs_control_info, but never assigns FileSystemControlFlags. Those four bytes go to the client as they are found in the response buffer. The buffer is zeroed on allocation, so a standalone request leaks nothing. A compound request can leak: the offset of the next response is advanced by the length pinned for the previous one, so a reply that was written into the buffer and then dropped in favour of the short error response of smb2_set_err_rsp() stays there, and the next reply is laid over it with only the header cleared. ksmbd does not implement quota tracking, so report no control flags.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-99103

    In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix unbound pool lifetime for pending pwqs KASAN reports a use-after-free of an unbound worker_pool in node_activate_pending_pwq(): BUG: KASAN: slab-use-after-free in _raw_spin_trylock+0x6d/0x120 Read of size 4 at addr ffff8880089ce000 by task kworker/u22:0/318 CPU: 1 UID: 0 PID: 318 Comm: kworker/u22:0 Not tainted 7.2.0 #1 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: 0x0 (flush-8:0) Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xce/0x610 kasan_report+0xce/0x100 _raw_spin_trylock+0x6d/0x120 pwq_dec_nr_in_flight+0x4b4/0xcb0 process_one_work+0x921/0x11a0 worker_thread+0x4d0/0xd20 kthread+0x2de/0x3c0 ret_from_fork+0x3aa/0x620 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 311: alloc_pwq+0x439/0xca0 apply_wqattrs_prepare+0x75e/0xd10 apply_workqueue_attrs_locked+0x44/0xa0 wq_nice_store+0x350/0x450 Freed by task 0: kfree+0x127/0x3b0 rcu_core+0x523/0x1780 handle_softirqs+0x1b3/0x610 Last potentially related work creation: put_unbound_pool+0x3f3/0x7d0 pwq_release_workfn+0x494/0x8e0 kthread_worker_fn+0x1ff/0x790 Canceling the last inactive work skips pwq_dec_nr_active(), so an empty pwq can remain on pending_pwqs when its refcnt reaches zero. pwq_release_workfn() currently puts the pool before removing that pwq. If this drops the last pool reference, the pool can be RCU-freed while the pwq remains reachable, and node_activate_pending_pwq() may trylock the freed pool->lock. Remove the pwq from pending_pwqs before putting the pool.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-99104

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor scx_bypass() claims bypass dispatch when the scheduler's depth goes from zero to one and releases it when the depth returns to zero, but propagates only the depth to the descendants, not the claim. A descendant that starts bypassing with its ancestor never claims, and one whose own bypass ends under the ancestor's keeps its claim, as its depth does not return to zero. A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that starts under a PM suspend has no claim, so once the resume lifts the root's bypass its tasks sit on the parent's bypass DSQs with nobody consuming them. Claim for every descendant whose depth goes from zero to one in the propagation and release every scheduler in the subtree whose depth returned to zero once the tasks have moved out of the bypass DSQs. A parent that is bypassing itself when a descendant claims consumes only its own bypass DSQs, empty until it leaves bypass and becomes the host.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-112250

    A vulnerability has been identified in BRAIN2 versions up to and including version 3.09. Under specific installation conditions, the password of a Windows service account may be written in cleartext to a setup log file. The issue occurs when Microsoft SQL Server access is configured using Integrated Security and the Windows account intended to run the BRAIN2 MainService is specified during execution of the BRAIN2 installation wizard. The setup log file is stored in the temporary directory of the Windows administrator performing the installation. This directory is not accessible to standard Windows users and can generally only be accessed by users with administrative privileges. Successful exploitation could result in the disclosure of credentials belonging to the configured BRAIN2 service account.

    Disclosure OS & kernel

    4.4 MEDIUM 0.2% exploit odds No fix listed