The internet is broken right now.

P-Net before 1.0.3 does not validate the LengthPeerStationName field of a CheckPeers block in get_check_peer(). The received length (up to 255) was used to copy data into the 241-byte peer station name buffer and to place the terminating NUL byte, so a crafted block writes up to 15 bytes past the end of the buffer. This can lead to a crash (denial of service) or potentially arbitrary code execution. Requires establishment of session that needs ADJACENT network access.

Memory safety Network gear

OpenRemote core before 1.31.0 contains an authorization bypass vulnerability that allows authenticated users to read other realms' gateway tunnel information via getGatewayActiveTunnelInfos. Attackers can request the gateway tunnel endpoint with their own realm and a victim gateway ID to disclose internal target hosts, ports, and routing data.

Auth & access Network gear

Buffer Copy without Checking Size of Input in certain ASUS router models allows an adjacent authenticated user to corrupt device operations and cause a denial of service via an HTTP request with input exceeding the expected length. Refer to the ' Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information.

Memory safety Network gear

A Reachable Assertion vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent OSPF peer to cause a denial of service via OSPF traffic processed while OSPF Source Packet Routing best-route Prefix-SID installation is configured.

Denial of service Network gear

Routinator stores a newly-retrieved TA certificate via HTTPS in cache without validation, potentially overwriting a known good TA certificate even if validation fails.

Crypto Network gear

Versa has confirmed a buffer overflow vulnerability in the IPsec implementation on VOS, aka Versa FlexVNF.  Buffer Overflow Vulnerability Description When a maliciously crafted IKE Auth packet is sent to VOS, the vsmd process crashes, thereby resulting in a Denial of Service. An attacker can create a Denial-of-Service attack on the VOS appliances by crafting a malicious IKE Auth packet and sending it to the WAN interfaces on the VOS. During the IKE Authentication phase, if the IKE SA negotiation fails, and the size of the Remote ID is larger than the buffer size used to process the Remote ID, it will result in a crash of the vsmd process on the VOS appliance. What is impacted? VOS nodes configured with IPsec VPN profiles of type controller-staging-sdwan or remote-access-server using a WAN interface as the IPsec endpoint are vulnerable. (IPsec profiles configured with an overlay interface as the IPsec endpoint are not affected.) This configuration typically applies to all Controllers, Hub Controllers, and SSE Gateways. Additionally, site-to-site VPN profiles configured without a peer IP address, hostname, or FQDN are also vulnerable. What is not impacted? The VOS nodes listed above are not vulnerable if they are not accessible from the Internet.

Memory safety Network gear

An Improper Resource Locking vulnerability in the clock synchronization daemon (clksyncd) of Juniper Networks Junos OS on MX Series allows a unauthenticated, logically adjacent attacker to cause a Denial-of-Service (DoS). If a SyncE or PTP upstream node sends a malformed message to an MX device equipped with SCBE3, a false 19.44MHz alarm is generated on the master RE. This leads to persistent RE switchovers and a clksyncd process crash. This issue is outside the attacker's direct control as it's a race condition. This issue affects Junos OS on MX Series: * All versions before 23.2R2-S7.7; * 23.4 versions before 23.4R2-S8.13; * 24.2 versions before 24.2R2-S5.5; * 24.4 versions before 24.4R2-S4; * 25.2 versions before 25.2R2-S1; * 25.4 versions before 25.4R1-S2.

Denial of service Network gear

An Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in the ember service in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker with local access to unmount arbitrary filesystems or cause a denial of service via the creation of specially named directories and a service restart.

Injection Network gear

In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix soft lockup in the netlink flow dump A production compute node carrying a few thousand datapath flows hit a soft lockup inside a single netlink flow dump and panicked. ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it emits, and that releases stats->lock with spin_unlock_bh() once per CPU that has touched the flow. Every release is a local_bh_enable(), and each one runs the pending softirq backlog in the dumping thread's own context. The skb bounds the flows one callback emits, but not the softirq work it absorbs. On a CPU that carries the box's packet load the backlog refills as fast as it drains, so the dumping thread becomes that CPU's softirq engine. It never sleeps and it has no reschedule point, so under voluntary preemption nothing can take the CPU away from it: neither the ksoftirqd the kernel woke to take the work over, nor the stopper thread the softlockup detector dispatches to refresh its timestamp. Hold BH off across the whole callback instead, the way ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop draining softirqs. The loop already runs under rcu_read_lock() and cannot sleep. What it gives up is preemption under CONFIG_PREEMPT, since a BH-off region is not preemptible outside PREEMPT_RT. The region stays short: the skb caps the flows one callback emits, and empty buckets cost no skb space but are each visited once per dump, as the cursor only moves forward. The table grows on insert and shrinks only on flush, so the walk is bounded by the largest flow count the datapath has held. The softirq backlog the callback used to absorb has no bound at all.

Denial of service Network gear

A vulnerability in the control channel socket implementation of Open Source Snort 3 could allow an authenticated, local attacker with low privileges to execute arbitrary commands as the Snort 3 process user. This vulnerability is due to a lack of authentication when a local user connects to the Snort control channel socket. An attacker could exploit this vulnerability by connecting to the Snort 3 control channel socket as a local user. A successful exploit could allow the attacker to execute arbitrary commands as well as read and write Snort 3 process memory.

Auth & access Network gear

Securepoint SSL VPN Client v2 on Windows contains vulnerabilities in the handling of OpenVPN configurations and proxy settings that allow non-privileged local users to influence operations performed with NT AUTHORITY\SYSTEM privileges. Two attack vectors have been identified: * Improper authorization of configuration checksum updates: The privileged service does not properly validate the authorization of connecting clients when updating the checksum of an OpenVPN configuration. This allows a non-privileged local user to modify an OpenVPN configuration and set a valid checksum without administrator privileges. The modified configuration is subsequently processed with NT AUTHORITY\SYSTEM privileges. * Argument injection via proxy settings: The client does not properly validate or sanitize proxy settings before passing them as arguments to OpenVPN. A non-privileged local user can inject additional arguments through the proxy settings, influencing the execution of OpenVPN with NT AUTHORITY\SYSTEM privileges. This attack vector does not require direct communication with the privileged service or modification of the protected OpenVPN configuration.

Other Network gear

OpenWISP Controller is a network and WiFi controller for provisioning, configuration management, updates, and PKI management. From 1.0.0 until 1.3.2, the GET /api/v1/controller/ca/<integer-id>/crl endpoint allows an authenticated organization manager with CA view permission to retrieve another organization's certificate revocation list by requesting its sequential CA identifier. CrlDownloadView.retrieve resolves the CA directly instead of using the organization-scoped object retrieval enforced by FilterByOrganizationManaged, bypassing the endpoint's intended authorization boundary. The response can disclose CA issuer information and revoked certificate serial numbers, but it does not expose CA private keys or allow modification. This issue is fixed in version 1.3.2.

Auth & access Network gear

An Integer Underflow vulnerability in DhcpMessageDecoder in Juniper Networks Session Smart Router allows an attacker with local network access to cause information disclosure and a denial of service via a malicious DHCP reply.

Disclosure Network gear

An out-of-bounds write in certain ASUS Router firmware allows an unauthenticated nearby user to send an HTTP request containing parameters that exceed the buffer length, potentially overwriting other memory regions or causing the system to crash. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.

Memory safety Network gear

An off-by-one error in certain ASUS Router firmware allows an unauthenticated nearby user to send a packet with a specific header length, potentially overwriting memory and causing the affected service to crash. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.

Denial of service Network gear

The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide. This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server. A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration. The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier.

Other Network gear

A sensitive information disclosure vulnerability in the affected interface of HPE Networking Fabric Composer could allow an authenticated low-privileged attacker to access sensitive information, if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to intercept protected network traffic.

Disclosure Network gear

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: validate transport header presence in set_ipv6_addr When executing IPv6 address rewrite actions on IPv6 fragments, set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr() processes a non-first IPv6 fragment, it sets key->ip.proto to NEXTHDR_FRAGMENT and returns early without calling skb_set_transport_header(). update_ipv6_checksum() unconditionally evaluates skb_transport_offset() on entry before checking l4_proto. Because skb->transport_header is uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although it is completely harmless. Fix this by returning early in update_ipv6_checksum() if l4_proto is NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset for fragments while preserving the debug warning for any other protocol where the transport header is unexpectedly missing. See the syzbot trace: !skb_transport_header_was_set(skb) WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635 [...] RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline] RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline] RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399 [...] Call Trace: <TASK> set_ipv6 net/openvswitch/actions.c:531 [inline] do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366 ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592 ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705 genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114 genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218 netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800

Other Network gear

In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload.

Other Network gear

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up committing both but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where committing both clones without modifications into the same zone is needed. So, let's just reset the entry in case for some reason we got an skb with a shared one during commit. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing.

Other Network gear

An authorization vulnerability exists in the country or region configuration interface of TP-Link RE305 V3. An unauthenticated attacker on the same local network may modify the wireless regulatory region and force the device to reapply its wireless configuration.  Successful exploitation may cause wireless connection interruptions, unavailable channels, client disconnections, or wireless service instability, and may cause the device to apply parameters intended for a different regulatory region.

Auth & access Network gear

Out-of-bounds write in certain ASUS Router firmware allow an unauthenticated nearby attacker to write data beyond the intended buffer or potentially cause a denial-of-service (DoS) via a crafted packet. Refer to the '  Security Update for ASUS Router Firmware  ' section on the ASUS Security Advisory for more information.

Memory safety Network gear

The BigFix MCM admin portal is directly accessible from the internet without VPN or network restriction.  A client-side configuration file discloses non-sensitive environment details. Exposing the configuration file publicly increases the attack surface and the risk of unauthorized access attempts.

Disclosure Network gear

P-Net before 1.0.3 does not check that a complete block header is present in the received data before reading the next block in DCP Set and Identify requests. If the last block ends at the end of the receive buffer, the block length of the following block is read past the end of the buffer. In addition, a DCP Set block with a length smaller than the two-byte block qualifier makes the length underflow, so the block is processed with a length of 65534 bytes. This can cause a crash (denial of service) or disclose a small amount of memory content. Requires ADJACENT network access.

Memory safety Network gear

P-Net before 1.0.3 does not validate the length of a received Ethernet frame in pf_eth_recv() before reading the EtherType, any VLAN tags and the PROFINET FrameID. The VLAN tag loop had no upper bound, so a truncated frame, or a frame consisting only of VLAN tags, makes the function read past the end of the receive buffer. This can cause a crash (denial of service) or disclose memory content.

Memory safety Network gear

An out-of-bounds read vulnerability in the FireCluster Sync processing allows an attacker positioned on the cluster interconnect, such as a compromised cluster peer or an on-path network attacker, to repeatedly crash the firewall's cluster synchronization process by sending specially crafted network traffic, resulting in a sustained denial of service.

Memory safety Network gear

An uncontrolled search path element vulnerability in ASUS Armoury Crate allows local users to execute arbitrary code with SYSTEM privileges via replacement of a dynamic-link library (DLL) that is later loaded by a high-privilege process. Refer to the ' Security Update for Armoury Crate App ' section on the ASUS Security Advisory for more information.

Code execution Network gear

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. &nbsp; The vulnerabilities tracked by CVE-2026-76496 are related to issues concerning improper link resolutions that are grouped under the Common Weakness Enumeration (CWE) Base CWE-59.

Other Network gear

A vulnerability in HPE NonStop TCP/IP UTILITIES could allow an unauthenticated remote attacker to cause a denial of service when traceroute is executed under certain conditions.

Auth & access Network gear

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco owned Open Source Snort 3 Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20291 are related to issues concerning improper privilege management that are grouped under the Common Weakness Enumeration (CWE) Base CWE-269.

Auth & access Network gear

ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. Prior to 2.9.15 and 3.0.17, the HttpsClient::download function in src/utils/https_client.cc sets libcurl CURLOPT_SSL_VERIFYHOST to 1 instead of the strict value 2L. Under adversary-in-the-middle and TLS interception conditions, this non-strict setting may weaken TLS peer identity validation and increase the risk of accepting a certificate for an unintended host. End-to-end exploitation is non-trivial in typical environments. This issue is fixed in versions 2.9.15 and 3.0.17.

Crypto Network gear

A denial-of-service vulnerability exists in open5GS v2.8.0 in the PFCP transaction handling path. When the PFCP transaction or timer resource pool is exhausted, ogs_pfcp_xact_remote_create() returns NULL, but the failure is not handled properly and leads to an ogs_assert(new) failure in ogs_pfcp_xact_receive(). An attacker able to send PFCP messages to the affected SMF/UPF can exhaust transaction resources and cause the network function process to terminate with SIGABRT, resulting in service disruption and preventing further session establishment until the affected component is restarted.

Denial of service Network gear

A sensitive information disclosure vulnerability in the cloud-client daemon of Deco BE63 allows authenticated attackers to retrieve the plaintext TP-Link ID account password.  Successful exploitation may allow attackers to compromise the associated cloud account and perform unauthorized actions on behalf of the affected user.

Disclosure Network gear

A NULL Pointer Dereference vulnerability in the na-grpcd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated attacker with access to the chassis-internal network to cause a denial of service via a network message.

Memory safety Network gear

An Out-of-Bounds Read vulnerability in the VRRP implementation in Juniper Networks Session Smart Router allows an L2-adjacent attacker to read stale memory contents or cause a system fault via a specially crafted VRRPv3 advertisement.

Memory safety Network gear

Traefik before 2.11.58 and 3.7.13 contains an authentication bypass vulnerability that allows unauthenticated clients to skip client-certificate checks because negated Host matchers are counted as served domains. Attackers can reach backends protected by RequireAndVerifyClientCert when a router rule with !Host() creates a TLS options conflict that falls back to the default options.

Auth & access Network gear Traefik

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. &nbsp; The vulnerabilities tracked by CVE-2026-76497 are related to issues concerning insecure temporary files that are grouped under the Common Weakness Enumeration (CWE) Base CWE-377.

Other Network gear

A time-of-check time-of-use (toctou) race condition vulnerability has been reported to affect QuRouter. If exploited, the vulnerability could allow remote attackers to compromise the security of the system. We have already fixed the vulnerability in the following version: QuRouter 2.6.4.001 and later

Other Network gear

An Out-of-bounds Write vulnerability in eventd of Juniper Networks Junos OS and Junos OS Evolved allows a local attacker to cause a Denial of Service (DoS) via sending a crafted packet to the eventd relay service.

Memory safety Network gear

A server-side request forgery vulnerability in Palo Alto Networks Checkov by Prisma® Cloud enables a local unauthenticated user to make unauthorized network requests from host to internal services.

Disclosure Network gear

A Heap-based Buffer Overflow vulnerability in eventd of Juniper Networks Junos OS and Junos OS Evolved on all platforms allows an unprivileged local attacker to cause a denial of service (DoS) or achieve privilege escalation to root via crafted IPC event messages.

Memory safety Network gear

Path traversal vulnerabilities in Palo Alto Networks Checkov by Prisma® Cloud enable an unauthenticated local user to write files to arbitrary locations on the scanning filesystem.

Disclosure Network gear

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. &nbsp; The vulnerabilities tracked by CVE-2026-76495 are related to issues concerning incorrect permission assignments that are grouped under the Common Weakness Enumeration (CWE) Variant CWE-732.

Other Network gear

On affected platforms running Arista EOS with IEEE 802.1X authentication and MACsec using dynamically derived keys, sensitive authentication information may be recorded in diagnostic data during a Smart Switch Upgrade (SSU). An attacker with administrative access on the device who obtains the affected diagnostic data could recover sensitive authentication information. This could potentially compromise the confidentiality and integrity of traffic protected by MACsec on the affected link. The vulnerability is only exposed during and after an SSU reload where an active 802.1X session used for MACsec is present.

Disclosure Network gear

A link following vulnerability in WatchGuard Fireware OS’s firewall daemon allows a local attacker with code execution as a low-privileged system process to overwrite arbitrary files with root privileges, and to tamper with firewall IP set data, by planting a crafted file system object and triggering a list update. Written content is partially constrained.

Disclosure Network gear

A missing authentication vulnerability in Fireware OS's FireCluster state synchronization feature allows an unauthenticated attacker positioned on the cluster synchronization network segment to force premature VPN tunnel termination by sending crafted cluster synchronization traffic.

Other Network gear

A use of hard-coded credentials vulnerability in Fortinet FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager 7.2 all versions may allow an adjacent-network authenticated attacker with user permission to join the FGFM configuration-sync mesh of the affected FortiGate deployment via the default pre-shared key.

Auth & access Network gear

An incorrect permission assignment vulnerability in the WatchGuard Agent's log directory allows a local, authenticated non-administrative user to create, modify, append to, or delete the agent's log files and write other files into the directory. This allows an attacker to tamper with or destroy the agent's security logs and stage further local attacks by placing executable content in a directory owned by a privileged service.

Auth & access Network gear

An improper certificate validation vulnerability exists in HPE Networking Fabric Composer. Successful exploitation could allow an authenticated attacker with low privileges to obtain sensitive information.

Crypto Network gear

In Modem, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01780439; Issue ID: MSV-8901.

Memory safety Network gear