The internet is broken right now.

Incorrect handling of unauthenticated downlink RRC Setup messages can cause the baseband to crash

Denial of service Device

Continuously sending control‑plane messages causes the baseband to crashes.

Denial of service Device

Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning. The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset. The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination. The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit.

Auth & access Device

A security vulnerability has been detected in Yoosee GM8135S Camera 21.00.01.36. This impacts an unknown function of the file wpa_supplicantX.conf of the component WiFi Configuration. Such manipulation leads to improper initialization. The attack can only be initiated within the local network. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Other Device

TP-Link Tapo C210 V3.60 contains an authentication bypass vulnerability in the DS JSON API. A crafted JSON request containing both a protected operation and public onboarding-related fields may cause module-level authorization checks to be applied inconsistently, allowing protected camera operations, including pan-tilt-zoom control, to be executed without a valid authenticated session.  Successful exploitation may allow an unauthenticated attacker on the adjacent network to perform protected camera operations, including pan-tilt-zoom (PTZ) control, without a valid authenticated session. This could result in unauthorized manipulation of camera functionality.

Auth & access Device

boneIO Black is vulnerable to Cross-Site Request Forgery (CSRF) on all state-changing API endpoints because it lacks CSRF tokens and does not validate Origin or Referer headers. A remote attacker can craft a malicious webpage that, when visited by a user on the internal network, sends cross-origin requests to the device. This allows the attacker to reboot the controller, toggle relay circuits, control gates and blinds, or shut down the device, causing loss of integrity and availability. Critically, due to CVE-2026-77053 (authentication disabled by default), any user on the same internal network can trigger attacker-controlled actions by visiting the malicious website. This issue was fixed in version 1.6.0.

Auth & access Device

Server side request forgery vulnerability exists in the DLP on-prem extensions version 11.13.1 and earlier allows the file Prefix parameter in the OpenEventEvidenceFile.do endpoint accepts arbitrary UNC paths without validation. The server-side code attempts to open the specified file path, causing Windows to resolve the hostname and initiate SMB authentication to the attacker-controlled host.

Disclosure Device

GodotSteam 4.17 through 4.23.2 trusts the peer value of 1 to mean that a player is the server. A grant_gold(1000000) call can be forged.

Denial of service Device

Thor Vector Graphics (ThorVG) is a production-ready vector graphics engine. Prior to 1.1.2, the bundled jpgd JPEG decoder accepts duplicate component selectors in an SOS scan header, causing each duplicate to increase m_blocks_per_mcu without checking the buffers sized from the frame components. A crafted grayscale JPEG can repeat its component in the SOS header, causing decode paths in src/loaders/jpg/tvgJpgd.cpp to write beyond heap buffers sized for one component. The issue is reachable through direct JPEG decoding and through JPEG images embedded in Lottie content, and confirmed impact is memory corruption followed by a process crash. This issue is fixed in version 1.1.2.

Memory safety Device

An authorization issue was addressed with improved network restrictions. This issue is fixed in iOS 27 and iPadOS 27. An app may be able to initiate calls or send messages.

Auth & access Device Apple Ipados

OpenHuman is an open-source agent harness available as a desktop application and Rust library. Before 0.56.0, the local server exposes the server-sent events endpoint at /events without bearer authentication, permits cross-origin browser access, and uses only a caller-supplied client_id to select WebChannelEvent objects from the process-wide event bus. An unauthenticated local client, or an attacker-hosted web page opened by the victim, can subscribe to another client's stream by supplying a known or guessed identifier; the fixed system identifier makes the proactive-message stream predictable. The exposed events can include complete assistant responses, streamed message content, tool names, tool arguments, and raw tool outputs intended for the local user interface. This issue is fixed in version 0.56.0.

Disclosure Device

PipesHub before 0.10.0 contains a server-side request forgery vulnerability in ImageParser._fetch_single_url that allows attackers to make the indexing service fetch internal addresses by embedding image URLs in documents. Attackers can supply Markdown or HTML via uploads, synced mailboxes, or web connectors to reach loopback, private-network, or cloud metadata endpoints, with image responses embedded into indexed content.

Disclosure Device

A stack-based buffer overflow in Thales SafeNet Authentication Client (SAC) SIS token engine processing can be triggered by a malicious physical or software-emulated smart card. The issue can occur before authentication or PIN entry and may cause a denial of service or potentially arbitrary code execution with the privileges of the affected process. Affected releases start with SAC 10.8 R7 and include SAC 10.9 R3 GA (build 10.9.7449).

Memory safety Device

boneIO Black firmware ships with authentication disabled by default. Its management web API listens on all network interfaces and exposes all endpoints without requiring credentials. An unauthenticated remote attacker can fully control the device, causing denial of service, modifying configuration, and operating connected physical circuits. This issue was fixed in version 1.6.0: a device without an administrator account refuses API requests until the owner creates one in the first-run wizard, and every API route is restricted to an authenticated role. Versions before 1.2.0 are based on Debian 10, are no longer supported and cannot be upgraded in place; affected devices should be re-flashed with the 1.6.0 system image.

Auth & access Device

FreeRDP before 3.32.1 contains a heap out-of-bounds read vulnerability in the Android client that allows malicious RDP servers to read beyond surface buffers by supplying unvalidated mappedWidth and mappedHeight values. Attackers can send a crafted RDPGFX_MAP_SURFACE_TO_WINDOW_PDU with oversized dimensions, causing android_UpdateWindowFromSurface to copy heap memory beyond the allocation, leading to crashes or memory disclosure.

Memory safety Device

LiveDocs is a primary-source-first documentation for AI agents. Prior to version 0.7.0, fetch_docs and introspect (kinds openapi/graphql, and resolve_source's docs_url) pass a client-supplied URL straight to URLSession with no scheme or host allowlist, and redirects are followed unconditionally. A prompt-injection payload embedded in fetched documentation can steer the model to call fetch_docs against internal or metadata endpoints and stream the response back into the conversation. This issue has been patched in version 0.7.0.

Disclosure Device

Multiple hardcoded credentials are embedded within product components and administrative functionalities. These credentials may enable unauthorized access to privileged accounts, services, or application features across affected deployments.

Auth & access Device

Embedded private keys protected by a shared password can be used to sign practitioner assertions for arbitrary practitioner identifiers, enabling unauthorized practitioner token requests.

Other Device

Sonatype Nexus Repository 3 Pro does not check the local account status when a user signs in through a configured SAML or OAuth2/OpenID Connect identity provider. A user whose account was disabled or locked by an administrator in Nexus Repository can sign in again with valid identity provider credentials for the same account, and then receives a new session with the roles of that account. The attacker needs no Nexus Repository session and no Nexus Repository privilege. The attacker needs a named account that holds valid credentials at the identity provider. The anonymous user is not part of this attack path.

Auth & access Device

A vulnerability in the authorization mechanism of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an unauthenticated, remote attacker to obtain an endpoint identity certificate. This vulnerability is due to improper authorization checks. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to bypass authorization to obtain an endpoint certificate.

Auth & access Device

The OSDP Control Panel reply parser cp_decode_response() in subsys/mgmt/osdp/src/osdp_cp.c decodes replies from a Peripheral Device into a stack-allocated struct osdp_event. For the REPLY_KEYPPAD and REPLY_RAW reply types, the payload length is taken from the received frame and the only validation performed is that the declared length is self-consistent with the number of payload bytes present in the frame. Because the attacker controls both the length field and the frame length, that check imposes no bound, and the subsequent memcpy() writes into the fixed 64-byte data arrays of struct osdp_event_keypress / struct osdp_event_cardread (OSDP_EVENT_MAX_DATALEN). The sibling REPLY_FMT handler in the same switch already carried the missing > OSDP_EVENT_MAX_DATALEN bound. The defect is reached from cp_process_reply(), which reads bytes from the OSDP RS-485 channel and passes them through osdp_phy_check_packet() and osdp_phy_decode_packet() before dispatching on the reply ID. Triggering it requires CONFIG_OSDP with CONFIG_OSDP_MODE_CP and an application event callback registered (the normal Control Panel integration), plus a frame carrying a correct SOM, a valid CRC-16, and a matching 2-bit sequence number — all of which are computable or observable by anyone on the bus. No check ties the reply ID to the outstanding command, so an oversized REPLY_KEYPPAD or REPLY_RAW is accepted as the answer to a routine CMD_POLL. A malicious or compromised card reader, or anyone with access to the RS-485 wiring, can supply such a frame; CONFIG_OSDP_SC_ENABLED only helps while a secure channel is active, and a single unauthenticated frame carrying a bad MAC causes sc_deactivate(), after which plaintext replies are again accepted. With the default CONFIG_OSDP_UART_BUFFER_LENGTH of 256, roughly 180 bytes of fully attacker-chosen data can be written past the end of the stack-allocated event object, over saved registers and the return address on typical Cortex-M and RISC-V frame layouts (Zephyr does not enable stack canaries by default). The impact ranges from a hard crash of the access-control panel to potential control-flow hijack in the context of the OSDP receive thread. The fix adds an OSDP_EVENT_MAX_DATALEN bound to both handlers, capping each memcpy() at the size of its destination.

Memory safety Device

A vulnerability was identified in beecue FastBee up to 2.1.0. Affected by this issue is some unknown functionality of the file /iot/script of the component Groovy Script Executor. The manipulation leads to code injection. The attack is possible to be carried out remotely. The identifier of the patch is 890a33846005a937a58cccd738b7fb9821b82ea9. It is suggested to install a patch to address this issue.

Code execution Device

Insecure permissions in klassm AndFHEM v2.4.1 (versionCode 241, the verified build) allows unauthorized attackers to arbitrarily manipulate another user's FHEM home-automation control configurations.

Other Device

TTLock Android application before v9.8.260718 and associated smart-lock firmware contain a hardcoded static AES key vulnerability that allows an attacker within Bluetooth range to decrypt the per-pairing session key transmitted during BLE pairing. Attackers can observe the pairing exchange, recover the persistent session key using the embedded defaultKey, and forge authenticated BLE requests to unlock the device, add fingerprints or access codes, and perform administrative actions without authentication or user interaction.

Auth & access Device

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.9, 43.7.6, 44.5.0, and 45.0.0-alpha.13, pointerLock permission requests from some cross-origin iframes caused session.setPermissionRequestHandler() to receive the top-level frame's requestingUrl and isMainFrame values instead of those of the requesting frame. An application that embeds untrusted iframe content and grants pointer lock based on the requesting origin could therefore grant the permission under the top-level page's identity. Applications that deny pointerLock for untrusted embedded content are not affected. This issue is fixed in versions 42.11.9, 43.7.6, 44.5.0, and 45.0.0-alpha.13.

Other Device

Improper permission handling during buffer operations allows untrusted applications to create memory mappings with inappropriate permissions

Memory safety Device

Memory Corruption when processing firmware update data in Download mode due to a missing bounds check.

Memory safety Device

In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01857954; Issue ID: MSV-8247.

Memory safety Device

In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01879158 / MOLY01774038; Issue ID: MSV-9811.

Memory safety Device

In Modem, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01876654 / MOLY01774038; Issue ID: MSV-9803.

Memory safety Device

In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01874018 / MOLY01774038; Issue ID: MSV-9802.

Memory safety Device

In Modem, there is a possible out of bounds write due to an integer overflow. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01872867 / MOLY01774038; Issue ID: MSV-9801.

Memory safety Device

In Modem, there is a possible out of bounds write due to improper input validation. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01775865; Issue ID: MSV-8895.

Memory safety Device

A vulnerability was identified in libimobiledevice up to 1.4.0. This affects an unknown part of the file src/afc.c of the component AFC. Such manipulation leads to heap-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Memory safety Device

The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'wdform_<n>_element<id> (Hidden Input field, name = user-defined, e.g. hidden_probe)' parameter in all versions up to, and including, 1.15.50 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires an administrator to open the Submissions screen and click the Show-on-Map link associated with the poisoned entry, at which point the attacker-controlled field_id value is echoed unescaped into a single-quoted JavaScript string in the FormMakerEditCountryinPopup popup — a step whose nonce and capability checks are automatically satisfied by the administrator's own session and the freshly minted fm_ajax_nonce embedded in the link.

XSS Device

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5, hid and usb permission checks made from an iframe caused setPermissionCheckHandler to receive the top-level frame's origin and details instead of the requesting frame's. An application that delegated hid or usb to a cross-origin untrusted iframe and allowed device access with origin-based logic could therefore grant that embedded frame access intended for the top-level page. This issue is fixed in versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5.

Other Device

IBM Watson Speech Services Cartridge 4.0.0 through 5.4.0 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read.

Memory safety Device IBM Watson Speech Services Cartridge

ZBar through 0.23.95 contains an out-of-bounds read vulnerability in _zbar_sq_decode() in zbar/sqcode.c that allows attackers to read heap memory outside the image buffer via crafted SQ code images. Attackers can supply an image with a skewed SQ code finder pattern near the edge, producing unchecked sample coordinates that crash the decoder and leak bytes into output.

Memory safety Device

A vulnerability has been found in Qihoo 360 D621-2, D603-2, D600-2, D619, D606-6 and D706 up to 6.4.9. Affected by this issue is the function verify_sign of the file fs2/bin/iscm of the component Firmware Signature Verification. Such manipulation of the argument sign leads to improper verification of cryptographic signature. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Crypto Device

LibreTV before v2.21.2 contains a server-side request forgery vulnerability that allows authenticated users to bypass checkUpstreamAllowed() by exploiting unpinned DNS resolution in fetchWithSafeRedirects(). Attackers controlling authoritative DNS can return public addresses during validation and internal addresses at connection time via /api/source/test, /api/proxy, /api/search or /api/detail to reach loopback services, private hosts or cloud metadata endpoints.

Disclosure Device

The Tapo Cloud MQTT broker contains a broken access control vulnerability in a proxy topic used by authenticated Tapo devices to request service tokens. The broker does not verify that the device ID supplied in a proxy request belongs to the authenticated device. An attacker who owns a Tapo device and knows another device's ID may obtain a device token scoped to the target device and use it to upload attacker-controlled content to the target user's Tapo Cloud storage. The content may then be presented in the Tapo app as a legitimate event. Successful exploitation may allow an attacker to upload attacker-controlled content that is presented to a target user as a legitimate Tapo event, retrieve internal service information through crafted proxy requests, or abuse Tapo Cloud outbound request capability in activity that could affect service availability.

Auth & access Device

The Bluetooth host's GATT client passed the value of a received Handle Value Notification, Handle Value Indication or Multiple Handle Value Notification to bt_gatt_subscribe_params::notify callbacks using only the length derived from the received ATT PDU. bt_att_recv() in subsys/bluetooth/host/att.c validates only a minimum PDU length and does not enforce the negotiated ATT MTU, and the fixed ATT L2CAP channel in subsys/bluetooth/host/l2cap.c applies no rx.mtu check either, so the only ceiling was the ACL reassembly buffer CONFIG_BT_BUF_ACL_RX_SIZE. Values longer than the 512-octet maximum attribute length defined by the Bluetooth Core Specification (Vol 3, Part F, Section 3.2.9) could therefore be handed to subscribers that size their buffers to that documented limit. A remote peer that a device has connected and subscribed to — a malicious, spoofed or compromised GATT server within radio range — triggers the flaw by sending a notification or indication whose value exceeds 512 octets on a subscribed handle. In the LE Audio unicast client this reaches a concrete out-of-bounds write: unicast_client_ep_notify() in subsys/bluetooth/audio/bap_unicast_client.c copies the notification into the 512-byte att_buf of struct unicast_client with net_buf_simple_add_mem() and no tailroom check whenever length equals bt_audio_get_max_ntf_size(), i.e. the negotiated ATT MTU minus three. notify_handler() in subsys/bluetooth/audio/bap_broadcast_assistant.c has the same shape. Reaching the overflow requires a build whose ATT MTU exceeds 515 octets (CONFIG_BT_L2CAP_TX_MTU and CONFIG_BT_BUF_ACL_RX_SIZE set for full-length attribute support); the shipped defaults are far smaller. The overflow writes peer-controlled bytes past att_buf directly over the adjacent struct net_buf_simple net_buf — its data, __buf, len and size fields — which the subsequent long-read accumulation then uses as its destination, turning a small linear overflow into a controlled write. net_buf_simple_add() only asserts on insufficient tailroom unless CONFIG_NET_BUF_HARDENING is enabled, and that option is disabled by default, so ordinary production builds perform the copy. Beyond the in-tree LE Audio clients, any application subscriber that sized its receive buffer to the specification's 512-octet limit was exposed to the same overflow. The fix rejects notification, indication and multiple-notification values longer than BT_ATT_MAX_ATTRIBUTE_LEN in call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c before any subscriber callback is invoked, so no subscriber can be handed more than the specified maximum. Remaining tuples of a multiple handle value notification are still delivered and oversized indications are still confirmed.

Memory safety Device

Mongoose is an embedded web server and network library. Prior to 7.23, ppp_handle_ipv6cp() in src/l2_ppp.c trusts the 16-bit IPv6CP len field without checking it against the received payload size. On a PPP or PPPoE link using MG_ENABLE_TCPIP and MG_ENABLE_IPV6, an unauthenticated adjacent peer can complete the required LCP exchange and send a short Configure-Request with an oversized length, causing ppp_tx_frame() to read beyond recv_queue.buf and write beyond tx.buf. The same length misuse can also expose adjacent heap bytes in a reply or hang the event loop through find_opt(). This issue is fixed in version 7.23.

Memory safety Device

TP-Link Tapo C210 V3.60 may expose shared credential material and cryptographic metadata through unauthenticated DS JSON API requests. The exposed shared credential can be accepted by the Streamd Digest authentication mechanism as an administrative password, allowing an unauthenticated adjacent-network attacker to establish encrypted media sessions without knowledge of the device account password.  Successful exploitation may disclose credential and cryptographic material and allow unauthorized access to encrypted media sessions.

Auth & access Device

Alpine iLX-F511 vCard Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected Alpine iLX-F511 devices. User interaction is required to exploit this vulnerability in that the target must connect to a malicious Bluetooth device. The specific flaw exists within the parsing of vCard data. The issue results from the lack of proper validation of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29017.

Memory safety Device

Alpine iLX-F511 prh_sdp_service_search_decode Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine iLX-F511 devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability. The specific flaw exists within the prh_sdp_service_search_decode function. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29069.

Memory safety Device

ASN1SCC is an open source ASN.1 compiler for embedded systems. Prior to 4.7.0.1, the ACN runtime function Acn_Dec_String_CharIndex_private in asn1crt/asn1crt_encoding_acn.c and the generated uPER decoder InternalItem_string_with_alpha_decode in StgC/uper_c.stg do not validate a decoded character index before reading allowedCharSet. For string alphabets whose size is not a power of two, a crafted message can select an unused encoded index, read a small bounded window of adjacent static program constants, and return the byte as a successfully decoded character. The full 128-character IA5String alphabet is not affected. This issue is fixed in version 4.7.0.1.

Memory safety Device

In Eclipse ioFog Operator versions 3.8.0 before 3.9.2, TLS certificate verification is disabled when the operator contacts the Controller API and when it logs in to an external OIDC issuer. An on-path attacker can present any certificate, capture the OAuth client secret (external mode) or the Controller bootstrap admin password (embedded mode with Controller HTTPS enabled), and supply the access token the operator stores for later Controller API calls. v3.8 removed Keycloak. The exposed credential is not a Keycloak realm-admin secret.

Crypto Device

ARKETEAM Protectel modules PROTECTELMAJ and BDF are vulnerable to arbitrary file upload. Any user is able to upload arbitrary file and override existing files in a temporary folder. This vulnerability might lead to execution of embedded JavaScript scripts when an authenticated user tries to download the uploaded file.  This issue has been fixed in: PROTECTELMAJ v6.5.19 and BDF v6.4.67

Code execution Device

EnergizeLab AI Station firmware, EilikO Linux robot firmware v2.1_20260617182218_release, and the EnergizeLab Windows desktop app 3.1.2 download firmware updates over plain HTTP and do not verify their integrity or authenticity. An attacker able to intercept or modify the traffic can substitute a malicious update.

Crypto Device