CVE-20XX-?
agent?

The internet is broken right now.

45 critical CVEs without a fix in the last 48 hours. Developers are crying quietly into their IDEs. 60 more already have a fix that someone still has to apply.

2,451 CVEs · updated 2026-11-20 21:11 UTC

Reset all
  1. CVE-2026-99696

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after defragmenting a bucket ocfs2_xattr_set_entry_bucket() hands loc.xl_entry to ocfs2_xa_set() twice: once for the bucket as it stands, and, if that reports -ENOSPC, once more after ocfs2_defrag_xattr_bucket() has packed the name/value pairs down. Defragmenting ends by sorting the entry array on xe_name_hash. Buckets are kept sorted, so the sort only permutes entries that share a hash, but lib/sort.c is an unstable heapsort and it does permute them. loc.xl_entry is an address inside xh_entries[], so afterwards it denotes whichever entry landed in that slot rather than the one the search found. The second ocfs2_xa_set() then works on the wrong entry. Nothing on that path compares the entry's name with xi->xi_name, so what happens depends on how the two entries compare in size: ocfs2_xa_reuse_entry() trips its BUG_ON() when the padded name sizes differ, and otherwise the new value is written into the neighbouring attribute's value slot while the attribute being set is left untouched. setxattr() reports success either way. Remember the entry's hash before defragmenting and look the entry up again afterwards, the way ocfs2_xattr_bucket_find() does. An entry that cannot be found again means the bucket no longer holds what the search found, so fail with -EFSCORRUPTED rather than writing through the stale pointer.

    Other OS & kernel Linux

    unscored No fix listed
  2. CVE-2026-99698

    In the Linux kernel, the following vulnerability has been resolved: mm/cma: accept memory of CMA areas reserved at a fixed address CMA areas allocated from memblock have their memory accepted by memblock_alloc_range_nid(), but areas reserved at a fixed address with memblock_reserve() are not. If a fixed CMA area is requested by the cma=<size>@<base> command line parameter, it may be in regular RAM and on TDX and SEV-SNP guests it must be accepted. Accept the memory of fixed CMA areas as well, so that all CMA areas are accepted regardless of how they were reserved.

    Other OS & kernel Linux

    unscored No fix listed
  3. CVE-2026-99699

    In the Linux kernel, the following vulnerability has been resolved: mm/cma: accept memory of multi-range CMA areas Patch series "mm/cma: accept memory of CMA areas reserved with memblock_reserve()", v1. Pages of allocated CMA areas are released to the buddy allocator with __free_pages(), which does not check for unaccepted memory. This usually works because memblock accepts the memory it allocates. However, multi-range CMA areas, used by hugetlb_cma, and fixed CMA areas requested with cma=<size>@<base> are reserved with memblock_reserve() and their memory is never accepted. On TDX and SEV-SNP guests the first access to such a page is fatal. To ease the backporting, each case is addressed by a separate patch: - patch 1 accepts the memory of multi-range CMA areas - patch 2 does the same for the fixed CMA areas The second patch won't apply cleanly to 6.6 and 6.12, but I believe the stable team LLMs will take care of that :) This patch (of 2): On systems with unaccepted memory, memblock allocations accept the allocated range, but when cma_declare_contiguous_multi() uses open coded allocation of multiple ranges, it reserves them with memblock_reserve() and they are never accepted. These pages are released to the buddy allocator by cma_activate_area() with __free_pages() that does not check for unaccepted memory, so the first access to such a page in a TDX or SEV-SNP guest is fatal. Accept the memory of each range when it is reserved.

    Other OS & kernel Linux

    unscored Fix listed
  4. CVE-2026-99700

    In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb_vmemmap: map the shared tail page writable page_ref_add_unless_zero() reads the refcount and then updates it with a cmpxchg. A lockless get, such as a page cache lookup or a PFN scanner, can read a non-zero refcount from a page that is then freed and reused as a hugetlb tail page. If HVO remaps its struct page to the shared tail page in between, the cmpxchg writes to read-only vmemmap: CPU0 (lockless get) CPU1 c = atomic_read(&page->_refcount) page freed page allocated as a hugetlb tail HVO remaps the struct page RO try_cmpxchg(&page->_refcount, &c, c + 1) -> write fault on read-only vmemmap The refcount is zero by then and the compare fails, but a compare-and-swap instruction needs write access whether or not it succeeds. The kernel oopses when hugetlb pages are allocated at runtime with HVO enabled while a lockless get races with it. Commit bd225530a4c7 ("mm/hugetlb_vmemmap: fix race with speculative PFN walkers") closed the window with RCU on both sides. The RCU was removed together with fake heads, on the wrong belief that it was only needed for them. Map the shared tail page writable instead of restoring the RCU. Every struct page on it is a tail with a zero refcount, so a late cmpxchg fails and leaves the page unchanged. RCU would put rcu_read_lock() back around every get and synchronize_rcu() back into hugetlb allocation and freeing. The cost is the protection against stray writes to tail struct pages. The shared page is shared by all hugetlb folios of the same order in the zone, so such a write now corrupts all of them instead of oopsing. Bootmem folios optimized when the memmap is set up keep their tails read-only. Nothing does a lockless get on them before hugetlb takes them over.

    Other OS & kernel Linux

    unscored No fix listed
  5. CVE-2026-99701

    In the Linux kernel, the following vulnerability has been resolved: mm/ksm: fix userfaultfd protection during merge and unmerge KSM loses userfaultfd protection when replace_page() builds a new PTE from vma->vm_page_prot. Dropping its uffd bit lets a subsequent write go through ordinary COW instead of userfaultfd write protection handling. For RWP, a merged page also becomes readable without faulting. Keeping the uffd bit and restoring PAGE_NONE fixes merging, but we also have to handle unmerging. An existing KSM page can be protected with RWP before MADV_UNMERGEABLE, so unmerging already needs fixing independently of preserving RWP during merging. Unsharing replaces a shared page with a private one and should leave userfaultfd protection in place, as do_wp_page() already does for write protection. Currently, an unshare fault reaches do_uffd_rwp() before it can proceed to do_wp_page(). - With synchronous RWP, handle_userfault() returns VM_FAULT_SIGBUS. break_ksm() then reports success with a KSM page still merged. - With asynchronous RWP, protection is cleared before unsharing. Preserve the uffd bit when merging, and restore PAGE_NONE for RWP. Let FAULT_FLAG_UNSHARE skip RWP fault handling and keep PAGE_NONE on each private copy as well. Unsharing can then complete with RWP still armed for a subsequent access.

    Other OS & kernel Linux

    unscored No fix listed
  6. CVE-2026-99702

    In the Linux kernel, the following vulnerability has been resolved: mm/vma: write lock source VMA before duplicating it in __split_vma() __split_vma() duplicates the source VMA before taking its VMA write lock, and until the VMA is write-locked, a concurrent thread might set VMA_MAYBE_GUARD_BIT, resulting in the duplication missing the flag. If this happens, then fork may fail to duplicate guard markers and, if a file-backed mapping, THP collapse may also discard the markers. Resolve this by taking the VMA write lock before vm_area_dup() and, since all callers of vm_area_dup() now hold the VMA write lock, assert that this is the case there, and add a comment to explain why it's needed. [[email protected]: add VMA write assert in vm_area_dup(), commit message touchup]

    Other OS & kernel Linux

    unscored No fix listed
  7. CVE-2026-99690

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: cache the mount context for dentry lock callbacks ocfs2_drop_dentry_lock() drops the inode reference before releasing the DENTRY lock. This lets inode eviction release the local inode and open locks before a remote unlink can proceed past the DENTRY lock. A DLM callback can still arrive before the DENTRY lock has been dropped. ocfs2_get_dentry_osb() obtains the mount context through dl_inode->i_sb, which can access a freed inode when the downconvert thread drops the last inode reference in its post-unlock callback: Downconvert thread DLM callback thread ------------------ ------------------- ocfs2_process_blocked_lock() ocfs2_dentry_post_unlock() ocfs2_dentry_lock_put() ocfs2_drop_dentry_lock() iput(dl->dl_inode) [inode reclaimed after RCU] ocfs2_blocking_ast() ocfs2_get_dentry_osb() dl->dl_inode->i_sb ocfs2_simple_drop_lockres() Store the mount context in the DENTRY lock resource's l_priv field and use the default mount-context lookup. Recover the containing dentry lock with container_of(), as already done for refcount locks, and remove ocfs2_get_dentry_osb(). ocfs2_dismount_volume() shuts down the DLM before freeing the mount context, so callbacks can use it without accessing the inode. Preserve the existing iput-before-unlock order to avoid delaying local inode and open lock release until after the DENTRY lock is released.

    Other OS & kernel Linux

    unscored No fix listed
  8. CVE-2026-99692

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: stop recovery before shutting down local allocators Recovery completion needs the local allocators until it has finished reclaiming a failed node's allocation window and truncate log. During unmount, quota recovery is stopped first, but that leaves recovery_state at OCFS2_REC_QUOTA_DISABLED. New non-quota recovery can still start. ocfs2_truncate_log_shutdown() drains existing completion work and releases osb_tl_bh before ocfs2_recovery_exit() closes that publication path: Unmount Recovery ------- -------- stop quota recovery; disable quotas truncate_log_shutdown() flush existing completion work recover another failed node queue completion flush local log; release buffer complete_truncate_log_recovery() use released osb_tl_bh recovery_exit(): disable and drain An extra buffer reference alone would still let completion append new records after the final truncate-log flush. Split stopping and draining recovery from freeing its state. Stop all recovery producers and drain completion work before shutting down either local allocator. Keep recovery-state release at its existing later point, so its lifetime relative to other teardown users stays unchanged. The second stop at recovery_exit() is harmless once recovery is disabled. KASAN report as below: BUG: KASAN: slab-use-after-free in ocfs2_truncate_log_needs_flush+0x23d/0x360 Read of size 8 at addr ffff8881093711e8 by task kworker/u16:3/53 CPU: 0 UID: 0 PID: 53 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ocfs2_wq ocfs2_complete_recovery Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? ocfs2_truncate_log_needs_flush+0x23d/0x360 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? ocfs2_truncate_log_needs_flush+0x23d/0x360 kasan_report+0xe0/0x110 ? ocfs2_truncate_log_needs_flush+0x23d/0x360 ocfs2_truncate_log_needs_flush+0x23d/0x360 ? __pfx_ocfs2_truncate_log_needs_flush+0x10/0x10 ? __pfx_down_write+0x10/0x10 ocfs2_complete_truncate_log_recovery+0x315/0x780 ? trace_hardirqs_on+0x18/0x160 ? __pfx_ocfs2_complete_truncate_log_recovery+0x10/0x10 ? ocfs2_complete_recovery+0x666/0x11b0 ? srso_alias_return_thunk+0x5/0xfbef5 ? kfree+0x308/0x580 ocfs2_complete_recovery+0x676/0x11b0 ? __pfx_ocfs2_complete_recovery+0x10/0x10 ? reacquire_held_locks+0xdd/0x200 ? process_one_work+0x7c8/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x190/0x300 ? __pfx_autoremove_wake_function+0x10/0x10 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 538: kasan_save_stack+0x33/0x60 kasan ---truncated---

    Other OS & kernel Linux

    unscored No fix listed
  9. CVE-2026-99693

    In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: serialize migration MLE cleanup on failure A migration MLE has a base reference for the mastering answer and an in-use reference held by dlm_migrate_lockres(). The finishing assertion consumes the base reference, but migration failure drops it again without checking whether the assertion already consumed it. The target queues its migration worker before it acknowledges the ALL_DONE packet, so its finishing assertion can be handled while the sender still waits for the status. If the connection fails before the status arrives, dlm_send_one_lockres() returns an error for a migration that the target has already completed: Old-master sender Finishing assertion ----------------- ------------------- publish MLE; take in-use reference send ALL_DONE; wait for status take lookup reference unlink MLE put lookup and base references send returns a connection error put base reference again; free MLE put in-use reference; access freed MLE dlm_assert_master_handler() holds dlm->spinlock from the MLE lookup to the final puts, and it takes dlm->master_lock around the unlink and the puts. Decide under the same locks: if the MLE is already unhashed, the assertion consumed the base reference, so drop only the sender's in-use reference. Otherwise unlink it before consuming the base reference so a later assertion no longer finds it. An assertion that got there first has also made the target the owner and cleared DLM_LOCK_RES_MIGRATING. Treating the attempt as failed at that point would leave the lockres owned by the target while this node still holds the other nodes' locks and refmap bits, so it could neither be purged nor migrated again. Finish our side as a completed migration does instead: drop those locks under res->spinlock if the target still owns the lockres, and recalculate its usage. Use the same cleanup for the pre-send failure, the send failure and the target-death failure paths. The sender's in-use reference keeps the MLE alive until its final put outside the nested locks. Successful migration retains its existing in-use-only put. A target that has died cannot assert after the sender has seen its death. The o2net node-down callback runs before the DLM one; it disconnects the node and flushes the workqueue that runs the message handlers, so an assertion already received has been handled by the time the DLM removes the node from the domain map. A node that leaves the domain cleanly sends its exit message only after its assertions have been answered. Two windows of the hand-over itself are left as they are: the handler switches the owner and the sender drops the other nodes' locks moments later, and an assertion from a live target that arrives after the sender has given up still meets the owner check in the handler. Waiting for the target before giving up would only stretch the first window into the time in which recovery of the target can observe it. KASAN report, only the relevant frames are kept: BUG: KASAN: slab-use-after-free in dlm_put_mle_inuse+0xce/0xe0 Read of size 8 at addr ffff8881190e3c20 by task umount/593 Call Trace: <TASK> dlm_put_mle_inuse+0xce/0xe0 dlm_migrate_lockres+0x16af/0x20d0 dlm_empty_lockres+0x60a/0xbd0 dlm_unregister_domain+0x53b/0x11d0 o2cb_cluster_disconnect+0xa5/0x110 ocfs2_cluster_disconnect+0x73/0xc0 ocfs2_dlm_shutdown+0x311/0x440 ocfs2_dismount_volume+0x696/0x940 generic_shutdown_super+0x15f/0x490 kill_block_super+0x40/0xa0 deactivate_locked_super+0xae/0x120 deactivate_super+0xa2/0xc0 cleanup_mnt+0x217/0x450 task_work_run+0x144/0x230 </TASK> Allocated by task 593: kmem_cache_alloc_noprof+0x20b/0x5c0 dlm_migrate_lockres+0x20e/0x20d0 dlm_empty_lockres+0x60a/0xbd0 dlm_unregister_domain+0x53b/0x11d0 o2cb_cluster_disconnect+0xa5/ ---truncated---

    Other OS & kernel Linux

    unscored No fix listed
  10. CVE-2026-99695

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after converting a block to a bucket ocfs2_xattr_create_index_block() turns a non-indexed xattr block into a tree by copying it into a bucket, and the copy sorts the entries: a block holds them in insertion order, a bucket by name hash. ocfs2_xattr_update_xattr_search() nevertheless relocates the caller's search by the index the entry had in the block, so unless the two orders agreed it points at an unrelated entry, and nothing between there and the write compares that entry's name with the one being set. Setting an xattr whose new value no longer fits the block arrives here with xs->not_found clear. The block gave up because ocfs2_xa_block_can_reuse() wants an exact namevalue size match, while ocfs2_xa_bucket_can_reuse() only wants an entry at least as large as the new one, so the bucket accepts a pair the block rejected and the update lands on whichever entry the sort left at that index. Equal padded name lengths get that other attribute's value replaced in place and its name left alone, so setxattr returns success while the attribute asked for keeps its old value. A longer one trips ocfs2_xa_reuse_entry()'s BUG_ON, and a shorter one is refused by the bucket as well, so ocfs2_xa_prepare_entry() wipes the entry and writes the new name over it, leaving xe_name_hash describing a name that is no longer there. Find the entry again by the name being set, matching the type as well. The copy carries every entry and every name over unchanged, and (type, name) pairs are unique within a block, so the match is exact. The type matters because the handlers strip their prefix before calling ocfs2_xattr_set(), so user.foo and trusted.foo share a stored name, a stored length and a hash, and both can sit in the same block. The name has to come from xi rather than from xs->here: a failed set can remove the entry xs->here names, and only the "growing" caller sets ctxt->set_abort, which is what stops the conversion. Scan every entry rather than narrowing on the hash the way ocfs2_find_xe_in_bucket() does, since an existing entry keeps the hash it was stored under, which a kernel that sign-extended the name bytes made different from the one computed now. An empty result means the entry did not survive the failed set and this has become an insert; leaving xs->here alone would keep it pointing into the block, which is rewritten as a tree root before the caller reads it again.

    Other OS & kernel Linux

    unscored No fix listed
  11. CVE-2026-99683

    In the Linux kernel, the following vulnerability has been resolved: vduse: fix VA/PA confusion in the coherent page fault path vduse_domain_get_coherent_page() assumes that iotlb entries above bounce_size were installed by vduse_domain_alloc_coherent(), so it treats map->addr as a physical address. But vduse registers with use_va = true, and when the device is bound to vhost_vdpa, vhost_vdpa_va_map() stores a userspace virtual address in map->addr, which vduse_domain_set_map() then copies into the same iotlb. A process holding the domain file descriptor across a rebind can therefore fault in an arbitrary physical page with read/write access, ignoring the entry permissions. Additionally, since the domain file mmap lacks VM_IO, the domain file itself can be mapped and passed to vhost_vdpa_va_map(), producing self-referential entries that bypass the coherent path check. To fix, only translate entries whose backing file is the domain file itself in vduse_domain_get_coherent_page(), reject such entries in vduse_domain_set_map() since only external mappings should be imported, and set VM_IO on the domain file mmap so vhost_vdpa_va_map() refuses to map it in the first place.

    Other OS & kernel Linux

    unscored No fix listed
  12. CVE-2026-99685

    In the Linux kernel, the following vulnerability has been resolved: iommu/virtio: Reset device before deleting virtqueues on probe failure viommu_probe() marks the device DRIVER_OK before populating the event virtqueue and registering the IOMMU device in sysfs. viommu_fill_evtq() hands the device a set of device-writable buffers through virtqueue_add_inbuf(), so from that point on the device may write into them and into the rings. If either step fails, the error path deletes the virtqueues without resetting the device first. The event buffers are allocated with devm_kmalloc_array() and are released as probe unwinds, so the device can go on writing to memory that has been freed. Reset the device before deleting the virtqueues, the way viommu_remove() already does.

    Other OS & kernel Linux

    unscored No fix listed
  13. CVE-2026-99686

    In the Linux kernel, the following vulnerability has been resolved: vhost: fix used ring index wrap in vhost_add_used_n_in_order vhost_add_used_n_in_order() advances start by nheads[i] but wraps it with a single subtraction. If start + nheads[i] >= 2 * vq->num, start can remain outside the ring. With used-ring logging enabled, start > vq->num makes (vq->num - start) underflow. log_write() then sets bits beyond the dirty-log bitmap, potentially corrupting adjacent userspace memory. This is reachable on the vhost-net TX path with VIRTIO_F_IN_ORDER: done_idx can reach VHOST_NET_BATCH (64), triggering the issue with a 32-entry ring. Wrap start with a mask to keep it within the ring. VHOST_SET_VRING_NUM enforces a nonzero power-of-two ring size, allowing start to be wrapped using & (vq->num - 1).

    Other OS & kernel Linux

    unscored No fix listed
  14. CVE-2026-99687

    In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: zero misaligned I/O bounce pages The misaligned I/O fallback copies the full bounce scatterlist to the request buffer during completion. If a data-in command transfers less than requested, part of a newly allocated bounce page can remain unwritten. Allocate bounce pages with __GFP_ZERO so all bytes copied during completion have a defined value. This path is already the slow fallback for misaligned I/O, so the added initialization cost is acceptable. Found during an LLM-assisted source audit and validated with a QEMU/KVM vhost-scsi target using misaligned data-in commands.

    Other OS & kernel Linux

    unscored No fix listed
  15. CVE-2026-99675

    In the Linux kernel, the following vulnerability has been resolved: nvmet: reject keep-alive timeouts that would overflow nvmet_set_feat_kato() and nvmet_alloc_ctrl() convert the 32-bit millisecond KATO from the host to seconds with DIV_ROUND_UP(kato, 1000). The addition in DIV_ROUND_UP() is done in 32 bits, so any KATO above 4294966296 ms wraps around and rounds to 0 seconds. A Set Features command with KATO 0xffffffff then succeeds but disables the keep-alive timer: Get Features returns 0 and Keep Alive fails with Keep Alive Timeout Invalid. A Connect command with such a KATO creates a controller without a keep-alive timer. The converted value has more consumers that can overflow. Get Features multiplies it by 1000, and the timer paths multiply it by HZ in 32 bits and arm a delay that must not exceed MAX_JIFFY_OFFSET. Reject a KATO whose rounded value does not fit all of these. Return Keep Alive Timeout Invalid from both Set Features and Connect. Validate Set Features before stopping the current timer so a failed update leaves its timeout unchanged. Round in 64 bits. A KATO of 0 keeps its current meaning.

    Other OS & kernel Linux

    unscored No fix listed
  16. CVE-2026-99676

    In the Linux kernel, the following vulnerability has been resolved: net: restore refcount ordering for lockless socket access Before commit fb041bb7c0a9 ("locking/refcount: Consolidate implementations of refcount_t"), default builds implemented refcount_inc_not_zero() using atomic_add_unless(), which provided full memory ordering on success. The commit removed that ordering on weakly ordered architectures, allowing accesses after a successful reference acquisition to be reordered before it. Use refcount_inc_not_zero_acquire() in the IPv4 and IPv6 established lookups and in inet_twsk_purge(), where the socket is validated again after taking a reference. bpf_sk_assign() can receive a socket pointer obtained through BTF without a reference. Use acquire ordering when it takes its own reference for a refcounted socket. Use refcount_set_release() when setting refcounts in the SYN cookie, TCP Fast Open, request migration, and TIME_WAIT paths. Keep the existing TIME_WAIT smp_wmb(), which separately orders the refcount store before ehash publication.

    Other OS & kernel Linux

    unscored No fix listed
  17. CVE-2026-99677

    In the Linux kernel, the following vulnerability has been resolved: xfs: clamp the pNFS layout range to the maximum file size xfs_fs_map_blocks() lets two bad layout ranges through. An offset of 2^63 or more is negative and passes "offset > limit". A length above the limit, such as NFS4_UINT64_MAX, wraps "offset > limit - length" and stays unclamped. With NFS4_UINT64_MAX, a read layout is built from an uninitialized mapping. Reject a negative offset and one at the limit, and clamp the length. This needs "xfs: cap the block count of xfs_iomap_write_direct() at one extent".

    Other OS & kernel Linux

    unscored No fix listed
  18. CVE-2026-99678

    In the Linux kernel, the following vulnerability has been resolved: xfs: cap the block count of xfs_iomap_write_direct() at one extent xfs_iomap_write_direct() reserves blocks for the whole count in an unsigned int. For a pNFS layout the client chooses that count, and an RW LAYOUTGET for 16 TiB wraps the reservation and shuts XFS down. xfs_bmapi_write() maps at most XFS_MAX_BMBT_EXTLEN blocks here, so cap the count at that. nfsd asks again for the rest. The other callers get the same mapping as before.

    Other OS & kernel Linux

    unscored No fix listed
  19. CVE-2026-99679

    In the Linux kernel, the following vulnerability has been resolved: xfs: refuse a pNFS LAYOUTCOMMIT of a range without blocks A client can commit a hole in a LAYOUTCOMMIT, because nfsd does not check the extents against its layouts. xfs_iomap_write_unwritten() then allocates written blocks there. A large hole overruns the block reservation and shuts XFS down. A small one exposes stale data. Refuse such a range with -EIO, using XFS_BMAPI_CONVERT_ONLY.

    Other OS & kernel Linux

    unscored No fix listed
  20. CVE-2026-99680

    In the Linux kernel, the following vulnerability has been resolved: xfs: mark the inode preallocated for pNFS write layouts past EOF xfs_fs_map_blocks() marks the inode XFS_DIFLAG_PREALLOC only when it allocates blocks for a write layout. A write layout past EOF can also hand out allocated blocks, such as speculative preallocation. blockgc then frees them under the layout, and another file may get them. Mark the inode whenever a write mapping ends past EOF.

    Other OS & kernel Linux

    unscored No fix listed
  21. CVE-2026-99667

    In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: always recheck the pmd in try_collapse_pte_mapped_thp() try_collapse_pte_mapped_thp() drops the PTE lock after it has cleared the page table, and takes the PMD lock and the PTE lock to remove it. In between, MADV_DONTNEED with CONFIG_PT_RECLAIM can reclaim the page table. The pmd_same() check is supposed to handle this, but it is only done with CONFIG_SPLIT_PTE_PTLOCKS. Fix it by performing the check unconditionally. Fix generated by an LLM and sent by Josef Bacik in private. [ david: adjust description ]

    Other OS & kernel Linux

    unscored No fix listed
  22. CVE-2026-99668

    In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix zapping migration entries for device-private THPs A PMD migration entry can refer to a device-private folio. zap_huge_pmd_folio() checks the folio type instead of the entry type, so it treats such a migration entry as a device-private entry. Installing the migration entry already removed the reverse mapping and dropped the mapping reference. Zapping it must not repeat those operations. Concurrent MADV_DONTNEED during migration back to system memory can trigger this. Check the PMD entry type using pmd_is_device_private_entry(). Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

    Other OS & kernel Linux

    unscored No fix listed
  23. CVE-2026-99669

    In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix truncate racing with PMD zapping zap_huge_pmd_folio() removes the rmap before calling folio_mark_dirty(). If this was the last mapping, truncation can skip unmapping the folio and proceed without waiting for the PMD lock, racing with dirtying. ifs_set_range_dirty() can oops if MADV_DONTNEED races with ftruncate() on XFS, when we get the folio set dirty after it was found to not be mapped anymore. Move folio_mark_dirty() and folio_mark_accessed() before rmap removal, matching the PTE zap path. This keeps the folio mapped while updating its state, so truncation must wait for the page table lock. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify comment and description ]

    Other OS & kernel Linux

    unscored No fix listed
  24. CVE-2026-99670

    In the Linux kernel, the following vulnerability has been resolved: can: dev: can_fill_info(): don't wake up controller if interface is down If the interface is down, the CAN controller might be powered down and its clocks gated. Don't call do_get_berr_counter() to read the bus error counters if the interface is down, and adjust can_get_size() to match. This removes one trigger for a synchronous external abort seen on i.MX8QXP when "ip link show" is run on a flexcan interface that was never brought up. The underlying cause is platform-specific: on i.MX8QXP the CAN clocks are gated through the SCU LPCG and the subsystem shares the IMX_SC_R_CAN_0 power domain, and there is a window after pm_runtime_resume_and_get() returns where the clock has not reached the module yet. This patch avoids the netlink query path while the interface is down, but does not root-cause the LPCG window itself. As a result, IFLA_CAN_BERR_COUNTER is no longer reported for down interfaces. Userspace must treat the attribute as optional. The issue was triggered on an i.MX8QXP board by running "ip link show" without ever bringing the interface up: Internal error: synchronous external abort: 0000000096000210 pc : flexcan_read_le+0x0/0x18 lr : flexcan_get_berr_counter+0x4c/0x8c Call trace: flexcan_read_le+0x0/0x18 flexcan_get_berr_counter+0x4c/0x8c can_fill_info+0x1f8/0x434 rtnl_fill_ifinfo+0x8fc/0xbb4 rtnl_dump_ifinfo+0x364/0x448 This is the same class of problem fixed for m_can in commit 91a55c72a821 ("can: m_can: m_can_get_berr_counter(): don't wake up controller if interface is down").

    Other OS & kernel Linux

    unscored No fix listed
  25. CVE-2026-99671

    In the Linux kernel, the following vulnerability has been resolved: can: raw, isotp: copy socket options outside of lock_sock() The CAN_RAW and CAN_ISOTP specific socket options are copied from and to user space while holding lock_sock(). A copy that faults or stalls, e.g. on a userfaultfd or FUSE backed mapping, holds lock_sock() for its whole duration. raw_notify() and isotp_notify() take lock_sock() of a socket that is bound to the vanishing device while holding RTNL. As the CAN_RAW options can also be changed on a bound socket, a stalled copy can block RTNL on an unregistration or namespace change of the bound device. Before "can: protect the receive lists with a per-device lock", raw_setsockopt() even held RTNL itself during the copy. CAN_ISOTP only copies its options for unbound sockets, which isotp_notify() skips without taking lock_sock(). Keep the user space copies out of the locked sections: Check the option name and length and copy the option values, including the CAN_RAW_FILTER filters, to kernel memory before lock_sock(). raw_setsockopt_locked() and isotp_setsockopt_locked() get the copied values directly and drop their now redundant length checks and copies. As a side effect, a failing copy can not leave partially overwritten options behind anymore. In raw_getsockopt() duplicate the filters under lock_sock() and copy them to user space after release_sock(). As the option name and length are now checked before lock_sock(), the order of the checks in isotp_setsockopt() and accordingly the order of the returned error values changes. This is in line with POSIX, which does not define an order in which multiple error conditions are detected and reported. The generic SOL_SOCKET options in sk_setsockopt() are not affected by this patch.

    Other OS & kernel Linux

    unscored No fix listed
  26. CVE-2026-99672

    In the Linux kernel, the following vulnerability has been resolved: can: protect the receive lists with a per-device lock The receive lists of a CAN device are located in the device's can_ml_priv and travel with the device when it is moved to another network namespace. But they are protected by the per-netns rcvlists_lock. So can_rx_unregister() needs dev_net(dev) to pick the right lock and silently returns when the passed namespace does not match dev_net(dev) anymore. isotp_release() and bcm_release() leave their notifier list before they take any lock that serializes against the netdev notifier, which runs under RTNL. When the bound device is moved to another namespace in this window, the notifier skips the socket and the release path has to remove the filters itself. isotp_release() passes the socket's namespace, which does not match dev_net(dev) anymore. bcm_rx_unreg() passes dev_net(dev), which can_rx_unregister() reads again for its check, so a namespace change between both reads makes the check fail as well. In both cases can_rx_unregister() silently returns. As can_rx_register() stores rcv->sk without a reference, the remaining receivers point to the freed socket (isotp) or the freed op (bcm): BUG: KASAN: use-after-free in isotp_rcv+0x1570/0x24d0 Read of size 1 at addr ffff888118130552 by task isotp_ns_uaf/578 can_rcv_filter+0x4af/0x8c0 can_receive+0x28d/0x3c0 can_rcv+0x2a9/0x310 __netif_receive_skb_one_core+0x21a/0x260 process_backlog+0x210/0x760 Besides this, the lists of a device are protected by the rcvlists_lock of the namespace that is passed in. Callers which pass dev_net(dev) read it at different times, so the same lists may be modified under the locks of different namespaces while the device is moved. Taking RTNL in these release paths is no option: raw_bind(), raw_setsockopt() and raw_release() already hold RTNL while adding and removing up to CAN_RAW_FILTER_MAX filters per socket, which unprivileged users can trigger repeatedly and which makes RTNL a global bottleneck. Instead fix the root cause and add a spinlock to struct can_dev_rcv_lists, which protects the receive lists of a CAN device or the 'any' CAN device lists of a namespace. It is initialized in can_set_ml_priv(), which is used by all CAN network devices. With this, can_rx_unregister() finds the subscription independently of the current namespace of the device. The protocols keep the device valid with their tracked references. The per-netns rcvlists_lock only protects the receive list statistics anymore, and CAN_RAW, CAN_BCM and CAN_ISOTP pass the namespace that has been used for can_rx_register(). So isotp_release() and bcm_release() now remove their filters correctly without RTNL, and raw_release(), raw_setsockopt(), raw_bind() and isotp_bind() do not need RTNL anymore and add and remove their filters under lock_sock(). To serialize bind() with NETDEV_UNREGISTER, bind() publishes the device inside the RCU section of its lookup, and raw_notify() and isotp_notify() recheck the bound device under lock_sock(). As RTNL does not keep NETDEV_DOWN out of bind() anymore, bind() checks IFF_UP after publishing the bound device, with a barrier pair against raw_notify() and isotp_notify(), so a down transition during bind() is still reported with ENETDOWN.

    Other OS & kernel Linux

    unscored No fix listed
  27. CVE-2026-99673

    In the Linux kernel, the following vulnerability has been resolved: can: replace ARPHRD_CAN type checks with can_get_ml_priv() Commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") introduced an explicit way to assign the midlayer private pointer (dev->ml_priv) to named users like ML_PRIV_CAN. A valid pointer returned by can_get_ml_priv() therefore identifies a real CAN device. The referenced commit only converted the j1939 and proc code to this check, while the other parts of the CAN subsystem still rely on dev->type == ARPHRD_CAN. The TUNSETLINK ioctl allows a down TUN/TAP device to set its hardware type to ARPHRD_CAN while dev->ml_priv remains NULL. Such a repurposed netdevice passes the ARPHRD_CAN checks. Commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") already made can_rx_register() reject such devices. But can_rx_unregister() still only checks dev->type and dereferences the NULL ml_priv when it walks the receive lists of the device. CAN_ISOTP reaches this path: isotp_bind() ignores the return values of can_rx_register() and binds the socket anyway. When the socket is released or the device is unregistered, isotp_release() and isotp_notify() remove the filters that have never been registered and trigger the NULL pointer dereference in can_rx_unregister(). This only requires owning a TUN/TAP device or CAP_NET_ADMIN in an unprivileged user namespace. Convert the remaining ARPHRD_CAN checks in af_can, bcm, gw, isotp and raw to can_get_ml_priv().

    Other OS & kernel Linux

    unscored No fix listed
  28. CVE-2026-99660

    In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: write-lock the VMA before waking waiters when unregistering userfaultfd_unregister() wakes pending missing faults before clearing the VMA's userfaultfd registration. With per-VMA fault locking, holding mmap_lock for write does not prevent another fault from queuing after the wakeup but before userfaultfd_clear_vma() write-locks the VMA. That waiter can then remain asleep indefinitely. Call vma_start_write() before waking waiters. Existing fault handlers queue themselves before dropping the VMA read lock, and new readers are excluded until mmap_write_unlock().

    Other OS & kernel Linux

    unscored No fix listed
  29. CVE-2026-99664

    In the Linux kernel, the following vulnerability has been resolved: mm/gup: recheck the PUD under PTL in follow_pud_mask() follow_pud_mask() reads the PUD without a lock. If it is a leaf, it takes the lock and calls follow_huge_pud(), which reads the entry again, but only tests whether it is present. A leaf can be zapped concurrently and a page fault can fill the empty entry with a page table. This currently only applies when device-dax makes use of PUD entries, and the fault after e.g., MADV_DONTNEED would find THPs to be disabled. That requires a sequence like 1) Fault in the PUD 2) Disable THP 3) Have GUP race against concurrent MADV_DONTNEED + refault Which is rather unlikely to happen in practice, which is why we never received a report about such a problem. Before commit 1b1676180246 ("mm/gup: handle huge pud for follow_pud_mask()"), we performed that check in follow_devmap_pud() by testing for pud_devmap(). Let's fix it by just structuring follow_pud_mask() similar to follow_pmd_mask(), minus protnone stuff that does not apply and minus FOLL_SPLIT_PMD handling. That makes it much easier to spot any such inconsistencies. Perform the pud_bad() check early in follow_pmd_mask() and just forward the PUD value. We can drop the pud_present() check in follow_huge_pud(), just like we have in follow_huge_pmd(). Even though we are performing more changes than strictly necessary, the fix should be easy to backport.

    Other OS & kernel Linux

    unscored No fix listed
  30. CVE-2026-99665

    In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: preserve dirty bits when collapsing PTE-mapped THPs try_collapse_pte_mapped_thp() clears PTEs without transferring their dirty bits to the folio. A shmem read fault can map a clean folio writable, so a later store only dirties the PTE. Losing that dirty bit allows reclaim to discard modified data. The assumption that regular files are read-only is also obsolete since commit 1b6444331bebb ("mm/khugepaged: enable clean pagecache folio collapse for writable files"). In any case, transferring PTE dirty bits to the folio when removing mappings (and while the folio is still mapped) is the right thing to do. Use get_and_clear_ptes() to collect the dirty bits and mark the folio dirty before unmapping it. Update the comment. This was reproduced with shmem using MADV_COLLAPSE followed by MADV_PAGEOUT. Fix generated by an LLM and sent by Chris Mason in private. [ david: adjust comment; simplify description; cover file-thp as well ]

    Other OS & kernel Linux

    unscored No fix listed
  31. CVE-2026-99666

    In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp() For a private mapping with userfaultfd, try_collapse_pte_mapped_thp() takes the PMD table lock before it maps the page table for the second time. If that (pte_offset_map_rw_nolock) fails, because the page table vanished in the meantime due to concurrent page table reclaim, it leaves through the abort label, where the PMD table lock is unlocked if it differs from PTE table lock. In case the PMD table lock and the PTE table lock match, which is the case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock() failed, we miss to unlock the PMD table. To fix it, forget the PTE table lock when we unmap+unlock the PTE table. Fix generated by an LLM and sent by Josef Bacik in private. [ david: move the ptl = NULL handling; rewrite description, drop wrong comments ]

    Other OS & kernel Linux

    unscored No fix listed
  32. CVE-2026-99653

    In the Linux kernel, the following vulnerability has been resolved: mm: fix unkillable fault loop on MAP_DROPPABLE memory handle_mm_fault() suppresses VM_FAULT_OOM for VM_DROPPABLE mappings. For user-mode faults, pending signals are processed before retrying the access. Kernel-mode faults on user buffers instead return directly to the faulting instruction. With persistent allocation failures (esp. memcg limits), a syscall, such as write(), can therefore loop while not dropping locks. Only suppress VM_FAULT_OOM when FAULT_FLAG_USER is set, allowing kernel-mode faults and GUP to fail and signal allocation errors. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

    Other OS & kernel Linux

    unscored No fix listed
  33. CVE-2026-99656

    In the Linux kernel, the following vulnerability has been resolved: mm/madvise: fix data loss from MADV_FREE on a KSM page MADV_FREE can clear the dirty flag of a singly mapped KSM folio. The folio remains in the stable tree and can gain new mappings without being dirtied again. Once marked lazyfree, reclaim can discard data that those mappings still need. KSM always marks a folio dirty when converting it to a KSM folio in try_to_merge_one_page(). Marking a folio lazyfree clears PG_swapbacked but leaves PG_dirty unchanged. Preserving PG_dirty makes reclaim restore PG_swapbacked instead of discarding the folio. This also protects folios that were already lazyfree when KSM converted them. Skip KSM folios before clearing their dirty flag, checking under the folio lock to serialize with KSM conversion.

    Other OS & kernel Linux

    unscored No fix listed
  34. CVE-2026-99657

    In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: set ->mm only after mmgrab() Radeon uses a non-NULL notifier->mm to decide whether to call mmu_interval_notifier_remove() when freeing a buffer object. __mmu_interval_notifier_insert() sets ->mm before validating the range, so a wrapping userptr range can leave ->mm set after insertion fails. Cleanup then tries to remove an unregistered notifier for which no mm reference was acquired. Set ->mm only after mmgrab(), once insertion can no longer fail. While we could fix radeon's code instead, setting ->mm on success only makes the code more robust. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

    Other OS & kernel Linux

    unscored No fix listed
  35. CVE-2026-99658

    In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: finish non-blocking interval invalidation on error When an ordinary MMU notifier rejects a non-blocking invalidation, the interval invalidation started beforehand is left unfinished: the caller skips mmu_notifier_invalidate_range_end(). Subsequent interval notifier operations can then wait forever. The only in-tree trigger is nouveau SVM, which uses both notifier types and rejects non-blocking invalidations. Reaping via the OOM reaper or process_mrelease() can therefore leave the GPU fault worker stuck, holding a reference that prevents the dying process's address space and memory from being freed. End the interval invalidation when an ordinary notifier fails a non-blocking invalidation, like mn_itree_invalidate() already does when an interval notifier fails. Make that handling clearer in the documentation of mmu_notifier_invalidate_range_start_nonblock(). Fix generated by an LLM and sent by Josef Bacik in private. [ david: simplify description, update function doc ]

    Other OS & kernel Linux

    unscored No fix listed
  36. CVE-2026-99659

    In the Linux kernel, the following vulnerability has been resolved: mm/mmu_gather: fix flushing ranges with 4 GiB or larger __tlb_adjust_range() takes the size of the range which has to be flushed as an unsigned int. Its callers, tlb_flush_{pte,pmd,pud,p4d}_range(), get and pass an unsigned long. Consequently, a range that is 4 GiB or larger gets truncated, possibly to 0. On arm64 with hugetlb, a 64k kernel can have 16 GiB hugetlb folios mapped contiguously at the PMD level and flush them when unmapping, and a 16k kernel can flush 64 GiB PUDs through tlb_unshare_pmd_ptdesc(). So at least these two scenarios are affected. Fix it by flushing the proper range instead of the truncated one by properly using "unsigned long" for range_size. Fix generated by an LLM and sent by Josef Bacik in private. [ david: use two-tab indent, simplify description ]

    Other OS & kernel Linux

    unscored No fix listed
  37. CVE-2026-99646

    In the Linux kernel, the following vulnerability has been resolved: mm/vma: don't leak the charge for stack growth acct_stack_growth() charges stack expansion even without VM_ACCOUNT. This can happen for read-only or MAP_NORESERVE mappings created with MAP_GROWSDOWN. Unmapping these VMAs does not release the charge, leaking Committed_AS. Only check and charge growth for VM_ACCOUNT VMAs, matching mremap(). Unaccounted growth skips the overcommit check while remaining subject to the other stack-growth limits.

    Other OS & kernel Linux

    unscored No fix listed
  38. CVE-2026-99647

    In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: split huge PUDs when adjusting VMA boundaries PFN mappings such as VFIO PCI BAR mappings can use PUD leaves while allowing VMA splits at page granularity. However, vma_adjust_trans_huge() only handles PMDs. After faulting a writable PUD-sized VFIO BAR mapping, changing its first page to read-only with mprotect() makes the PMD walk treat the PUD leaf as a PMD table. Applying MADV_DONTFORK to the first PMD-sized chunk leaves the PUD spanning two VMAs: the PMD-aligned boundary skips splitting. Walk the page tables once at each adjusted boundary and split a huge PUD or PMD leaf as needed. Handle PUD leaves even when the boundary is PMD-aligned.

    Other OS & kernel Linux

    unscored No fix listed
  39. CVE-2026-99648

    In the Linux kernel, the following vulnerability has been resolved: mm/vma: call ->may_split() before a partial merge A driver can use the ->may_split() hook to forbid a VMA boundary at certain addresses. A device-dax device is a character device that gives raw access to a range of memory through mmap(). device-dax refuses any address that is not a multiple of the device's alignment through vm_ops->may_split. vma_merge_existing_range() can move boundaries, but does not call vm_ops->may_split. If a range at the edge of a VMA gets the attributes of the adjacent VMA, the function moves only that range over to the neighbour: one VMA shrinks and the other grows. This is a partial merge, and vma_modify() tries it before any split. Take a device-dax VMA that lies next to another VMA of the same file. The user calls mprotect() on the one page of the first VMA that touches the second VMA, and asks for the protection that the second VMA already has. The result is a partial merge. It puts the boundary inside a 1 GiB mapping, which is a single leaf entry at the PUD level. As part of the merge, the kernel looks for a huge PMD to split at the new boundary. That code does not expect a PUD leaf: vma_merge_existing_range() commit_merge() vma_adjust_trans_huge() split_huge_pmd_address() mm_find_pmd() treats the PUD leaf as a pointer to a PMD table, so the "table" is the device memory that the leaf maps __split_huge_pmd() reads a PMD that the user wrote to the device memory folio_put() on the folio that this PMD names Bad. While the code must at some point be taught to split PUD entries as well, the issue here is that we move VMA boundaries such that they are incompatible with the driver. Fix this by calling ->may_split() on the address that a partial merge would move the boundary to, and by abandoning the merge if the driver refuses. vma_modify() then tries the split, which fails with -EINVAL. Factor out existing split handling into check_split() and reuse it. Fix generated by an LLM and sent by Chris Mason in private. [ david: improve description; cleanup the code ]

    Other OS & kernel Linux

    unscored No fix listed
  40. CVE-2026-99649

    In the Linux kernel, the following vulnerability has been resolved: mm/ksm: check large swap-cache folios before mapping them KSM folios are always small, but their shared swap slots can be read back as part of a large folio in the swap cache. ksm_might_need_to_copy() skips large folios, so another process can map a page with an incompatible anon_vma or page index. Reverse mapping then cannot find the new mapping, preventing migration or reclaim. Apply the same compatibility checks to large folios as to small ones. Pass the page corresponding to the swap entry and copy only that page when necessary. In do_swap_page()'s copy path, decrement only that slot's swap count, because the source swap-cache folio can now be large. Fix generated by an LLM and sent by Chris Mason in private.

    Other OS & kernel Linux

    unscored No fix listed
  41. CVE-2026-99651

    In the Linux kernel, the following vulnerability has been resolved: mm/ksm: reset the unstable trees of all nodes Each full scan resets ksm_nr_node_ids unstable tree roots. Enabling merge_across_nodes resets this count to 1, even if per-node roots were previously allocated. So when toggling "merge_across_nodes" 0 -> 1 -> 0, a scan that starts while the setting is 1 and continues after switching back to 0 can encounter stale unstable tree roots, resulting in UAF. Only root is allowed to change "merge_across_nodes", and the documented sequence is: "merge_across_nodes setting can be changed only when there are no ksm shared pages in the system: set run 2 to unmerge pages first, then to 1 after changing merge_across_nodes, to remerge according to the new setting." Let's fix it by tracking in ksm_nr_node_ids the actual number of allocated tree roots. remove_all_stable_nodes() and ksm_check_stable_tree() will now scan more tree roots (skipping the empty ones), which is harmless.

    Other OS & kernel Linux

    unscored No fix listed
  42. CVE-2026-99652

    In the Linux kernel, the following vulnerability has been resolved: mm: fix deadlock of mremap() against UFFDIO_MOVE With per-VMA locks, UFFDIO_MOVE can run concurrently with mremap() on different VMAs in the same mm. Those VMAs can share page tables, so both operations can acquire the same pair of page-table locks. UFFDIO_MOVE orders the locks by address, while mremap() takes the source lock first. These conflicting orders can deadlock; mremap() holding mmap_lock for writing no longer helps. Move double_pt_lock() and double_pt_unlock() to mm/internal.h and use them for all page-table moves in mremap(). Preserve the source entry checks after acquiring both locks. Remove the comments claiming that exclusive mmap_lock makes lock ordering irrelevant. In move_ptes(), make sure to just recheck source and destination PMD after taking the locks and drop the overly-long comment. Fix generated by an LLM and sent by Chris Mason in private. [ david: use new helpers consistently; simplify description and comments; move_ptes() fixup ]

    Other OS & kernel Linux

    unscored No fix listed
  43. CVE-2026-99639

    In the Linux kernel, the following vulnerability has been resolved: ovl: fix whiteout creation in casefolded directories unlink and rmdir fail with EINVAL on an overlay with casefolded (case-insensitive) layers, if the name exists in a lower layer. Casefolded layers need CONFIG_UNICODE. Root can mount such an overlay, and so can an unprivileged user in a user namespace, with tmpfs layers. Overlayfs does not change a lower layer. To remove a name that exists there, it hides the name with a marker file, a whiteout. It creates the whiteout in the work directory, a scratch directory on the upper filesystem, and renames it over the name in the upper directory: - ovl_whiteout() creates the whiteout with mknod, or as a hard link to an earlier whiteout. - ovl_cleanup_and_whiteout() then prepares the rename with start_renaming_two_dentries(), which returns -EINVAL if the source or the target dentry is unhashed, that is, not in the dentry hash table. With casefolded directories, both dentries can be unhashed: - The target. Lookup in a casefolded directory leaves a negative dentry unhashed, so the rename target is unhashed if the name does not exist in the upper directory. - The source, which is the new whiteout. tmpfs hashes a dentry when mknod or link makes it positive, but ext4 does not, so on ext4 the source is unhashed as well. The cleanup after the failure also refuses an unhashed dentry, so on ext4 the whiteout is left behind in the work directory. Reproduced with rm and rmdir on casefolded tmpfs and ext4 layers, also as uid 1000 in a user namespace. Fix this by creating the whiteout with ovl_create_temp(), which repeats the lookup if the new dentry is unhashed. Prepare the rename with start_renaming_dentry(), which looks up the target name with the directories locked. The caller looked the name up without a lock, so return -ESTALE if the name now refers to a different inode. [amir: pass the name used for lookup instead of taking a name snapshot]

    Other OS & kernel Linux

    unscored No fix listed
  44. CVE-2026-99640

    In the Linux kernel, the following vulnerability has been resolved: ovl: do not let chattr change the casefold flag chattr +F or -F on an overlay directory can make the directory, or the whole mount, unusable. Lookups of the directory, and lookups in it, then fail. From code inspection, the caller only needs to own the directory. The upper filesystem must support casefolding: ext4 or f2fs with the casefold feature, or tmpfs with the casefold option. chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a directory. The flag enables casefolding (case-insensitive name lookup) for the directory. All directories of an overlay must match the casefold state that was recorded at mount time, and ovl_lookup_single() enforces this: - A lookup in a directory that does not match fails with -ESTALE. - A lookup of the directory itself fails with -EREMOTE. ovl_fileattr_set() copies the directory up, which creates it in the upper layer if it only existed in a lower layer. It then passes FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts the change if the upper directory is empty, regardless of what the merged directory contains. The merged directory is the one that the user sees, with the names from the upper and the lower directories. After the change the upper directory no longer matches the mount. If the directory is the root of the overlay, the whole mount is affected. The flag can also change without chattr +F or -F. chattr reads all flags of a directory, changes one and writes all of them back. For a directory that only exists in a lower layer, overlayfs reads the flags from the lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs compares with the mount. So its directories count as not casefolded. With a lower layer on such an xfs and an upper layer on ext4 with the casefold feature, chattr +A on a lower-only directory therefore sets FS_CASEFOLD_FL on the new, empty upper directory. Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an overlay directory whose upper directory was empty. Afterwards lookups below it failed with ESTALE, and lookups of the directory itself failed with EREMOTE. The chattr +A case was seen once, on a kernel with an earlier form of this patch that still passed the caller's flag on: lookups of the directory failed with EREMOTE. Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that can change the flag, asks for a casefold flag on a directory that does not agree with the casefold state of the mount. This also refuses the chattr +A case above. [amir: check the flag against the casefold state of the mount instead of reading back the flags]

    Other OS & kernel Linux

    unscored No fix listed
  45. CVE-2026-99641

    In the Linux kernel, the following vulnerability has been resolved: ovl: fail the mount if the casefold flag has changed An unprivileged user in a user namespace can repeatedly trigger a kernel warning with their own overlay mounts. They do so by changing the casefold flag of the topmost layer's empty root, the top directory of that layer, after the layers are set and before the mount is created. The casefold flag of a directory makes name lookups in that directory case-insensitive. All layers of an overlay must agree on casefolding. ovl_mount_dir_check() reads the casefold flag of a layer root when fsconfig() sets that layer, and saves the result in ofs->casefold. The mount is created later, by another fsconfig() call with FSCONFIG_CMD_CREATE. The casefold flag of an empty directory can be changed. The casefold flag of the overlay root must match ofs->casefold. ovl_get_root() copies the flag from the topmost layer root, as it is when the mount is created. On a mismatch, ovl_get_root() only does a WARN_ON(), and the mount continues. The check is not a WARN_ON_ONCE(), so each such mount warns again. An unprivileged user needs CONFIG_UNICODE, and a tmpfs mounted with the casefold option in their namespace. Reproduced by changing the casefold flag of the empty upper directory after the layers were set and before FSCONFIG_CMD_CREATE, with tmpfs and ext4 layers, and as uid 1000 in a user namespace. Fix this by replacing the WARN_ON() with a check that fails the mount with -EINVAL.

    Other OS & kernel Linux

    unscored No fix listed
  46. CVE-2026-99643

    In the Linux kernel, the following vulnerability has been resolved: khugepaged: fix readahead lock inversion in collapse_file() collapse_file() can call page_cache_sync_readahead() while still holding source folios locked. If truncate holds mapping->invalidate_lock exclusively and waits for one of those folios, readahead waits for invalidate_lock and neither side can make progress. We need to release those folio locks before starting readahead. On a page cache miss, roll back first, populate the collapse range, and retry once. Doing readahead after rollback avoids an extra pass when all folios are already present. If another miss occurs on retry, give up rather than keep retrying while truncate or reclaim removes folios. Keep page_cache_sync_readahead() and wait for read I/O with filemap_lock_folio(), releasing each folio before moving to the next. The existing uptodate check during collapse still handles read errors. Shmem uses shmem_get_folio() for swapin and fallocated folios without taking mapping->invalidate_lock, so it is unaffected.

    Other OS & kernel Linux

    unscored No fix listed
  47. CVE-2026-99644

    In the Linux kernel, the following vulnerability has been resolved: mm/memory-tiers: unregister empty tiers outside memory_tier_lock When offlining a node's last memory empties its tier, clear_node_memory_tier() calls device_unregister() while holding memory_tier_lock. A concurrent sysfs read can hold a kernfs active reference and block in nodelist_show() on that mutex. device_unregister() then waits in kernfs_drain() for the read to finish and release its active reference, while the reader waits for the offlining task to release the mutex. Return the node's former tier from clear_node_memory_tier(), making the helper more similar to set_node_memory_tier(), which also returns a memory_tier pointer. Let the caller unlink an empty tier under memory_tier_lock before rebuilding demotion targets, then unregister its device after dropping the lock.

    Other OS & kernel Linux

    unscored No fix listed
  48. CVE-2026-99630

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: validate the moved individual BOs on restore An individual BO of a user queue VM, i.e. one which doesn't share the root reservation, goes to the individual needs_update list when it is evicted. The user queue restore looked at vm->invalidated for them, which the VM state machine rework turned into the always_valid evicted list and commit 18decfc9e8cc ("drm/amdgpu/userq: actually validate userq BOs") into the individual evicted one. That list only holds imported DMA-bufs of compute VMs though, so for a user queue VM nothing is validated. The restore then neither locks such a BO nor moves it back. Its PTEs are updated to wherever it is now, cleared if it went to system memory, and it doesn't get the new eviction fence, so it can move again under the running queue. On navi48, once the BOs of an SDMA user queue are evicted from GTT (debugfs amdgpu_evict_gtt) the queue faults on its ring and rptr: amdgpu 0000:03:00.0: in page starting at address 0x0000000100000000 from client 10 amdgpu 0000:03:00.0: Faulty UTCL2 client ID: SDMA0 (0xd) amdgpu 0000:03:00.0: in page starting at address 0x0000000100101000 from client 10 Validate the BOs on the individual needs_update list like before. (cherry picked from commit eb0d94765d4be18d41e93ad09947dd9cc06ed31a)

    Other OS & kernel Linux

    unscored Fix listed
  49. CVE-2026-99632

    In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: use the queue's process info for the WPTR BO eviction fence amdgpu_amdkfd_map_gtt_bo_to_gart() removes the eviction fence of bo->vm_bo->vm->process_info from the WPTR BO of a new queue. bo->vm_bo is the VM which opened the BO last, not necessarily the KFD process' VM, and a render node VM has no process info. On navi31, an unprivileged process which exports its WPTR BO with AMDKFD_IOC_EXPORT_DMABUF and imports it on a second render node fd oopses in AMDKFD_IOC_CREATE_QUEUE: BUG: kernel NULL pointer dereference, address: 0000000000000060 RIP: 0010:amdgpu_amdkfd_map_gtt_bo_to_gart+0x86/0x1a0 [amdgpu] init_user_queue.part.0+0x180/0x250 [amdgpu] pqm_create_queue+0x32d/0x730 [amdgpu] kfd_ioctl_create_queue+0x583/0x9f0 [amdgpu] Pass the process info of the queue instead. With the fix, the queue is created and destroyed normally. (cherry picked from commit 6b4157498a176bd1c6083f6bb5aaf8a257a2027e)

    Other OS & kernel Linux

    unscored No fix listed
  50. CVE-2026-99633

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: keep the CS user fence BO in GTT The CS ioctl hands the GPU the GART address of the user fence BO, but since the BO keeps its own preferred and allowed domains, it no longer makes sure the BO is in GTT. A user fence in a VRAM BO, which only needs to be a page in size, gets its address from amdgpu_bo_gpu_offset(), which warns about non-contiguous VRAM. On navi31, a CS with a user fence in a 4K VRAM BO, or in one created with AMDGPU_GEM_CREATE_VM_ALWAYS_VALID: WARNING: amdgpu_object.c:1531 at amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu], CPU#11: cs_gem_checks/18393 RIP: 0010:amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu] Call Trace: <TASK> amdgpu_cs_parser_bos.isra.0+0x4eb/0x850 [amdgpu] amdgpu_cs_ioctl+0x97e/0x2510 [amdgpu] drm_ioctl_kernel+0xac/0x110 [drm] drm_ioctl+0x2c6/0x5b0 [drm] __x64_sys_ioctl+0xa0/0xf0 do_syscall_64+0xa3/0x4d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e and BOs which can't be in GTT at all, like GWS or OA ones of a page in size, pass the checks as well. Only take BOs which can't be anywhere else than in GTT as user fence, which the CS then validates there along with its other BOs. While at it, detect userptrs with amdgpu_ttm_tt_is_userptr(); amdgpu_ttm_tt_get_usermm() returns NULL once the task which created the userptr is gone. v2: only take BOs which can only be in GTT instead of special casing the user fence BO in the validation, use amdgpu_ttm_tt_is_userptr() (Christian) (cherry picked from commit f16989def9561d04d0f2e77216f5319112d29bf1)

    Other OS & kernel Linux

    unscored No fix listed