CVE-20XX-?
agent?

The internet is broken right now.

60 critical CVEs without a fix in the last 48 hours. Developers are crying quietly into their IDEs. 165 more already have a fix that someone still has to apply.

2,671 CVEs · updated 2026-11-19 17:22 UTC

Reset all
  1. CVE-2026-99024

    In the Linux kernel, the following vulnerability has been resolved: optee: register TEE devices only once fully initialized optee_probe() called tee_device_register() on both the client and the supplicant device before the rest of struct optee had been initialized. tee_device_register() calls cdev_device_add(), which does two things at once: it creates /dev/tee0 and /dev/teepriv0, and it links the device into the tee class so that class_find_device() can find it. From that moment on the device is reachable both from user space via tee_open() and from kernel space via tee_client_open_context(). The only gate in teedev_open() is tee_device_get(), which merely checks that teedev->desc is non-NULL, which was already set by tee_device_alloc(). Therefore, there is effectively no gate at all. A context opened in that window can run against a struct optee where - optee->call_queue.mutex is not initialized by optee_cq_init() - optee->supp mutex and completions is not initialized by optee_supp_init() - optee->rpmb_dev_mutex is not initialized yet, - the message argument cache is not initialized by optee_shm_arg_cache_init() - optee->ctx is still NULL Any open session or invoke during this window takes uninitialized mutexes and dereferences a NULL pointer. Fix it by moving both tee_device_register() calls down to the point where all of struct optee is set up. [JW: adding fixes and cc]

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-99007

    In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN __drm_fb_helper_initial_config_and_unlock() calls drm_client_modeset_probe() first, which already fills in each mode_set->mode/num_connectors for every connected output, and only afterwards calls drm_fb_helper_single_fb_probe() to create fb_helper->fb and wire it into those mode_sets via drm_setup_crtcs_fb(). If drm_fb_helper_single_fb_probe() fails with anything other than -EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function bails out before drm_setup_crtcs_fb() runs and before setting fb_helper->deferred_setup. The client is left with mode_sets that have a mode and connectors but mode_set->fb == NULL, and nothing marks this fb_helper as needing a retry. __drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing when fb_helper->deferred_setup is set, so a later .restore() call (drm_lastclose() on process exit, in this report) commits the stale mode_set through drm_client_modeset_commit() -> drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(), which hits WARN_ON(!set->fb). Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe() failure, not just -EAGAIN, so restore keeps skipping the commit until a later hotplug event successfully re-probes and re-populates mode_set->fb. The real error code is still returned to the caller unchanged.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-99008

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an RFCOMM tty is closed. rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only then registers the tty device and saves it in dev->tty_dev. If that registration fails, dev->tty_dev is never set at all. The device can be looked up in the meantime, so an open() of /dev/rfcommN gets through rfcomm_tty_install() and attaches to it. When that tty is closed again, rfcomm_dev_shutdown() uses dev->tty_dev without checking it: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131 Call Trace: tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372 tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705 tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718 __fput+0x418/0xa50 fs/file_table.c:512 rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the same check to rfcomm_dev_shutdown(), so the tty device is only moved when it was actually registered.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-99009

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex An RFCOMM connect() issued while a BR/EDR link is being authenticated makes lockdep report a circular dependency, and the reported cycle is a real AB/BA between rfcomm_mutex and hdev->lock. rfcomm_security_cfm() is called from the HCI event path, which already holds hdev->lock: hci_rx_work() hci_event_packet() hci_cc_read_enc_key_size() [hdev->lock] hci_encrypt_cfm() [hci_cb_list_lock] rfcomm_security_cfm() [rfcomm_mutex] while an RFCOMM connect() from userspace takes the same two locks the other way round: rfcomm_sock_connect() rfcomm_dlc_open() [rfcomm_mutex] __rfcomm_dlc_open() rfcomm_session_create() kernel_connect() l2cap_sock_connect() l2cap_chan_connect() [hdev->lock] WARNING: possible circular locking dependency detected kworker/u131:1/1128 is trying to acquire lock: rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm] but task is already holding lock: hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0 Chain exists of: rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback the same way. Both orders have to be seen in the same boot, which is why a BR/EDR connection alone is not enough to show it: a session set up by the remote side is created by rfcomm_accept_connection() in krfcommd, which calls kernel_accept() and never takes hdev->lock under rfcomm_mutex. Connecting a device that authenticates and encrypts the link and then calling connect() on an RFCOMM socket towards any address - the connect does not have to succeed, the order is recorded before the page timeout - reports it every time. Only the session socket has to be connected with the lock held, and it does not: nothing else can see the socket before it is put on the session list. So connect it first and take rfcomm_mutex afterwards, which removes the rfcomm_mutex -> hdev->lock order for good, rather than keeping the HCI event path out of rfcomm_mutex. rfcomm_session_create() becomes rfcomm_session_connect(), which returns the connected socket without touching the session list, and rfcomm_dlc_open() adds the session once it holds the lock again. If another opener added a session for the same pair while this socket was connecting, that session is used and this socket is dropped. __rfcomm_dlc_open() now takes the session it should use, and its state check runs after the lock is re-acquired, so a DLC that was opened or closed in the meantime is still handled. Over an existing ACL link the connection can complete before the session reaches the list, and the wakeup from the socket callback is then lost, so krfcommd is woken once the session is visible. Connecting without the lock opens a window in which the socket can be closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds nothing to do and returns without touching it, and rfcomm_dlc_open() would then attach a DLC whose owner is gone. rfcomm_dlc_close() now marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the mark once it holds rfcomm_mutex again and drops the socket instead of attaching the DLC. The mark is cleared when an open starts, so a DLC that is reused is not affected. This covers both callers of rfcomm_dlc_open(), the socket and the tty layer.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  5. CVE-2026-99000

    In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix shrinker accounting double-subtraction on nested external pins xe_bo_pin_external() and xe_bo_unpin_external() support nested pins, since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count refcount rather than a boolean. However, the shrinker accounting calls xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked unconditionally on every pin_external()/unpin_external() call, instead of only on the transition into and out of the pinned state. An external BO (dma-buf) can be pinned more than once while already pinned, for example when it has multiple attachments/importers, each independently calling xe_bo_pin_external(). Each such nested pin subtracts the BO's pages from the shrinker's accounting again, even though the BO's pages were already removed from consideration by the first pin. Symmetrically, each nested unpin adds them back again before the BO is actually unpinned. This desynchronizes the shrinker's page and object counts from reality, and since they are declared as signed long but interpreted as unsigned long in xe_shrinker_count(), the underflow can turn into an enormous shrinkable/purgeable page count, causing the shrinker to be invoked excessively under memory pressure. Guard the accounting calls with the same pin-count transition checks already used to guard the pinned_link list maintenance, so accounting is only updated on the outermost pin and the final unpin. While centralizing this logic into xe_bo_account_pin()/ xe_bo_account_unpin(), also close a second, related accounting gap affecting imported dma-bufs. For an imported bo's ttm_tt, xe's ttm_tt_populate hook (xe_ttm_tt_populate()) early-returns without calling xe_ttm_tt_account_add(), since TTM_TT_FLAG_EXTERNAL is set without TTM_TT_FLAG_EXTERNAL_MAPPABLE. However, TTM core's ttm_tt_populate() wrapper unconditionally marks the tt as populated on driver-hook success, so ttm_tt_is_populated() still reports true for it. xe_bo_account_pin()/xe_bo_account_unpin() trusted ttm_tt_is_populated() as a proxy for "these pages are accounted for by the shrinker", and would subtract/add pages for such a tt that were never added in the first place, again underflowing the shrinker's counts. This is reachable today via xe_bo_pin_external(), and would have become newly reachable via the fb-pin path once this patch routes __xe_pin_fb_vma() through xe_bo_pin_account() below, so fix it here rather than in a later patch, to avoid a commit in this series that introduces the regression before fixing it. Skip the accounting for imported bos, using the same EXTERNAL && !EXTERNAL_MAPPABLE test xe_ttm_tt_populate()/xe_ttm_tt_unpopulate() use to decide whether to act, via a new xe_ttm_bo_is_imported() helper (hoisted up from its only prior use site). v2: - Fix the critical issue caught by Sashiko AI review: the pin-count transition check introduced here was still bypassed by the fb-pin path (__xe_pin_fb_vma()/__xe_unpin_fb_vma()), which could leave a stale pinned_link entry and a permanent shrinker accounting leak when the fb-unpin performed the true last unpin. Addressed in a separate follow-up patch in this series rather than folded in here, since it is a distinct bug with its own Fixes: tag. - Drop the unneeded local "last_unpin" variable in xe_bo_unpin_external(), restoring the original inline bo->ttm.pin_count == 1 check; it was a no-op rename not used by any of the new accounting helpers, and was going to be deleted again by the follow-up patch anyway. v3: - Exclude imported dma-bufs from the pin/unpin shrinker accounting, fixing another underflow caught by Sashiko AI review. - Add a short comment on the backup-object pin site noting it's already populated/accounted at pin time, addressing (as a false-positive clarification, no code fix needed) a separate Medium-severity accounting-leak concern also caught by Sashiko AI ---truncated---

    Other OS & kernel

    unscored 0.2% exploit odds Fix listed
  6. CVE-2026-98992

    In the Linux kernel, the following vulnerability has been resolved: namespace: don't copy an unmounted mount tree may_copy_tree() accepts a mount whose root is an nsfs or pidfs file before it checks whether that mount is mounted. This exception exists for nsfs and pidfs mounts. They are part of no mount namespace so neither check_mnt() nor is_mounted() would let them through and bind-mounting a nsfsfd or a pidfd wouldn't work. Problem is that exception also admits a bind mount of such a file when it was lazily unmounted and is only kept alive by a file descriptor: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --rbind /proc/self/fd/3 /tmp/y With MS_REC or AT_RECURSIVE copy_tree() doesn't stop at the unmounted mount. It copies every mount that stayed attached to it as well. So if you have a bunch of overmounts over the nsfsfd or the pidfd the whole unmounted stack is copied. That's a bug. So refuse to walk an unmounted tree. Copying its root alone stays possible. So a bind mount of a namespace that is gone can still be recreated from a file descriptor on the old one. The file descriptor pins that mount and its root and __has_locked_children() only reads the direct children which don't leave the parent's list without namespace_sem. The internal mounts carry MNT_NS_INTERNAL instead of NULL and are still walked. Copying an unmounted tree recursively fails with EINVAL.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-98984

    In the Linux kernel, the following vulnerability has been resolved: dcache: don't put a mountpoint on a dentry that's being removed rmdir(), unlink() and rename() call dont_mount() on the victim and then detach_mounts() with the victim's inode locked. do_lock_mount() takes the inode lock of the mountpoint and checks cant_mount() so a mount can't show up after detach_mounts(). But attach_recursive_mnt() makes a second mountpoint for the root of the source mount so that the mounts already located at the destination can be put on top of it. No inode is locked for that one and d_set_mounted() only refuses a dentry that is unlinked. Between detach_mounts() and d_delete() the victim is still hashed: rmrace: b passed dont_mount() and detach_mounts(), sleeping T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 () T1: rmdir(/tmp/plcant/d/b) = 0 errno 0 109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw 108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw A bind mount of the directory that's being removed is moved beneath an existing mount while the rmdir() is located between the two calls. The mount ends up on the removed directory and nothing will ever detach it. Check cant_mount() in d_set_mounted() as well. dont_mount() raises the flag under d_lock before detach_mounts() runs so either the mountpoint is set first and detach_mounts() finds the mount or the flag is seen and the mount is refused.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  8. CVE-2026-98933

    In the Linux kernel, the following vulnerability has been resolved: usb: hub: use shorter 120ms post resume hold for SS root hubs Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers an AMD platform issue. Users running Android adb report crashes after adb has been polling and waking up the USB subsystem once a second for some time. Vendors are working on a solution. Disabling USB runtime PM is one way to prevent this issue, but it is also proven that reducing the hold time to 120ms in resume also mitigates it. See Link for more details. Reducing the hold time to 120ms for the USB3 roothub is in itself a valid change and optimization, as the current 200ms is excessive: a root hub has no upstream suspended hub whose wake propagation needs to be accounted for, but still need some time for USB3 link training to complete. Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") is intended for.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  9. CVE-2026-98936

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: reset ar->num_stations on hardware start When (multiple) hw restart occurs, we end up in a situation where we cannot accept new stations / mesh peers. This seems to be the 'num_stations' in 'struct ath11k' that did not get reset properly in this case. In ath11k_mac_op_start(), it was indeed the only accounting var that did not get reset so let's clear it too. This avoids problems like those: [1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0 [1248828.088115] Call trace: [1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P) [1248828.088119] ieee80211_reconfig+0x774/0x1438 [1248828.088123] ieee80211_restart_work+0x10c/0x178 [1248828.088127] process_one_work+0x178/0x3c0 [1248828.088130] worker_thread+0x280/0x440 [1248828.088133] kthread+0xe0/0xf8 [1248828.088137] ret_from_fork+0x10/0x20 [1248828.088141] ---[ end trace 0000000000000000 ]--- [1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128) [1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  10. CVE-2026-124671

    The Burst Statistics WordPress plugin before 3.7.5 does not enforce a shared report's date range on the analytics it serves to the report's share link, allowing anyone holding the link to read the report's statistics for any period the site retains rather than the period the report was shared for.

    Other Web app

    4.3 MEDIUM 0.2% exploit odds No fix listed
  11. CVE-2026-0004

    A transient execution vulnerability in some AMD processors may allow an attacker with the ability to execute code on the system to infer data in the L1D cache, potentially resulting in the leakage of sensitive information across privileged boundaries.

    Other

    5.7 MEDIUM 0.2% exploit odds No fix listed
  12. CVE-2026-124935

    Undefined behavior in the WebRTC: Networking component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7.

    Other Browser & mail

    unscored 0.2% exploit odds Fix listed
  13. CVE-2026-123129

    The Event Tickets Manager for WooCommerce WordPress plugin before 1.6.0 does not validate the ticket-type price sent to one of its unauthenticated AJAX actions when the referenced product has no ticket types configured, and stores the submitted price site-wide, where it is applied to the next event ticket added to any cart, allowing unauthenticated visitors to buy event tickets at an arbitrary price, including for free. This is due to an incomplete fix of CVE-2026-34898.

    Other Web app

    5.3 MEDIUM 0.2% exploit odds No fix listed
  14. CVE-2026-118188

    The PublishPress Revisions: Duplicate Posts, Submit, Approve and Schedule Content Changes WordPress plugin before 4.3.1 does not verify that a user is permitted to read a given post before returning its content through its revision-comparison feature, allowing any authenticated user, including a Subscriber, to read the title, content and excerpt of any other user's private, draft, pending, scheduled or trashed post.

    Other Web app

    4.3 MEDIUM 0.2% exploit odds No fix listed
  15. CVE-2026-119259

    The All-in-One Video Gallery WordPress plugin before 5.1.0 does not check the type, status or ownership of the target post before writing its view count and duration meta, allowing unauthenticated visitors to create or change that meta on any post, including private and draft posts, and to inflate the view count without limit.

    Other Web app

    5.3 MEDIUM 0.2% exploit odds No fix listed
  16. CVE-2026-121190

    UI misrepresentation in Extensions in Google Chrome prior to 157.0.8103.38 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted Chrome extension. (Chromium security severity: Low)

    Other Browser & mail Google Chrome

    4.3 MEDIUM 0.2% exploit odds Fix listed
  17. CVE-2026-97350

    Securepoint SSL VPN Client v2 on Windows contains vulnerabilities in the handling of OpenVPN configurations and proxy settings that allow non-privileged local users to influence operations performed with NT AUTHORITY\SYSTEM privileges. Two attack vectors have been identified: * Improper authorization of configuration checksum updates: The privileged service does not properly validate the authorization of connecting clients when updating the checksum of an OpenVPN configuration. This allows a non-privileged local user to modify an OpenVPN configuration and set a valid checksum without administrator privileges. The modified configuration is subsequently processed with NT AUTHORITY\SYSTEM privileges. * Argument injection via proxy settings: The client does not properly validate or sanitize proxy settings before passing them as arguments to OpenVPN. A non-privileged local user can inject additional arguments through the proxy settings, influencing the execution of OpenVPN with NT AUTHORITY\SYSTEM privileges. This attack vector does not require direct communication with the privileged service or modification of the protected OpenVPN configuration.

    Other Network gear

    6.9 MEDIUM 0.2% exploit odds No fix listed
  18. CVE-2026-119289

    Zuke is a code-first, strongly typed build automation system for Deno. Prior to 1.10.0, the @zuke/gh githubWorkflow(...) gate correlates a dispatched workflow run using only a display-title marker that is visible in the workflow run list and can be copied by another dispatcher. In configurations where the external workflow repository grants workflow_dispatch permission to a party not equally trusted by the releasing repository, an attacker can dispatch a run with the marker and cause the gate to adopt its conclusion without verifying the event, ref, or creation window. A passing substituted run can authorize an unvalidated release, while a failed or cancelled run can block a valid release, and the persisted adopted run ID preserves the substitution across build resume. This issue is fixed in version 1.10.0.

    Other

    7.1 HIGH 0.2% exploit odds Fix listed
  19. CVE-2026-99159

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx() On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[] shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma() dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader() writes two such indices into meta->buffers[], which rb_cpu_meta_valid() would reject on the next boot, discarding the previous boot's trace. A CPU's sub-buffer array starts after its meta header and the nr_subbufs integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx() inverts that calculation but skips only the integers, not the header, so its base is one sub-buffer low whenever the omitted header size crosses the alignment boundary. Invert the calculation with rb_subbufs_from_meta() rather than repeating it. rb_range_buffer() maps an index back to an address through the same helper, so the two directions can no longer disagree.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-99026

    In the Linux kernel, the following vulnerability has been resolved: net: team: free skb when broadcast has no txable port bc_transmit() sends the original skb through the last txable port. When no port is txable, it returns false without consuming the skb, but team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the skb and its socket write-memory charge. A TX-enabled, link-down port keeps the broadcast transmit op installed. Carrier can stay up through a second link-up, TX-disabled port or be forced on by userspace. Free the original skb on the no-port path while leaving the existing drop accounting intact. Discovered by Sashiko during review of previous commit.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-98993

    In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  22. CVE-2026-98957

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: disable rx napi when removing device Unloading the mt7915e module with a MT7916 triggers multiples WARN in __netif_napi_del_locked() and in page_pool_disable_direct_recycling() because the driver does not disable the napi before destroying it. This is troublesome since on MT7916 it is required to unload the module and reinsert it with a different enable_6ghz parameter to change the frequency. The system generally becomes unstable after reinserting the module. Fix it by disabling rx napi inside mt7915e itself, even through napi rx is enabled in the mt76 generic code. Disabling it in the mt76 generic code was previously attempted and reverted because napi was disabled too late and rx handlers could access freed structures. Note that the tx side is enabled and disabled by the mt76 generic code. It is disabled in mt7915_stop_hardware() since, unlike mt7915_unregister_device(), is it also called in the probe path if an error happens after rx napi is enabled.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-98953

    In the Linux kernel, the following vulnerability has been resolved: devlink: fix devlink_rel reference leak when notify work is pending devlink_rel_nested_in_notify_work_schedule() takes a reference on the devlink_rel for the notify work and then queues the work, ignoring the return value of schedule_delayed_work(). If the work is already pending, nothing new is queued, the work runs only once and drops only one reference, so the extra one is leaked together with the devlink_rel and its index in devlink_rels. This is easy to hit. devl_register() of a nested instance queues the work, and if the instance is unregistered before the work has run, devlink_rel_put() queues it again while it is still pending. The work also keeps rescheduling itself for as long as the parent devlink lock cannot be taken, which widens the window. Registering and unregistering a nested devlink instance 100 times while holding the parent lock leaks all 100 devlink_rel objects. The reschedule path in devlink_rel_nested_in_notify_work() has the same problem: if the work was queued again while it was running, the reference it holds is never dropped. Drop the reference in both places when the work was already pending. The pending work holds its own reference, so this can not be the last one.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-98944

    In the Linux kernel, the following vulnerability has been resolved: HID: steam: Refactor registration This refactors and simplifies the registration/unregistration flow. Since we now only perform registration when the client isn't opened anymore, the logic for handling that can be removed, and the rest of the function streamlined. We also remove the previous assumption that we have a serial number to show we're registered, replacing it with a single purpose boolean. In a previous refactor the code for unregistering a battery if later registration steps failed was accidentally left out. As a result, a lingering power_supply object could get left over after the steam object was torn down. This is also fixed here.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  25. CVE-2026-114663

    Vyper 0.4.0b1 through 0.5.0b1 miscompiles unfoldable constants and omitted default arguments from imported modules, because parse_Name resolves their names in the using function's scope rather than at declaration. When a contract's parameter, local, or loop variable shares such a name, attacker-influenced input can replace the intended value, including out-of-range values for narrow types such as uint8, corrupting validation or accounting logic.

    Other Library

    8.6 HIGH 0.2% exploit odds Fix listed
  26. CVE-2026-64672

    Terragrunt is a flexible orchestration tool that allows Infrastructure as Code written in OpenTofu or Terraform to scale. Prior to 1.1.1, the terragrunt catalog command derives a predictable per-repository catalog clone root under the shared system temporary directory and follows a symlink already placed at that path. A local attacker who can write to the temporary directory and predict the cataloged repository can redirect cleanup and cloning outside the intended root, causing an existing repository-named directory to be deleted and replaced in the victim's security context. The attack requires the victim to run terragrunt catalog on a shared host while the symlink is present, and it is not remotely exploitable. This issue is fixed in version 1.1.1.

    Other

    4.4 MEDIUM 0.2% exploit odds Fix listed
  27. CVE-2026-121245

    Race condition in Autofill in Google Chrome prior to 157.0.8103.38 allowed a remote attacker to potentially obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium)

    Other Browser & mail Google Chrome

    5.3 MEDIUM 0.2% exploit odds Fix listed
  28. CVE-2026-119416

    CakePHP through 5.4.3 contains an improper cookie domain validation vulnerability in the Http Client CookieCollection that allows malicious servers to receive and plant cookies by abusing unanchored suffix matching. Attackers controlling a host such as one ending in a victim domain suffix, or sending Set-Cookie Domain values for unrelated hosts, can steal session cookies or inject cookies into shared client cookie jars.

    Other Web app

    6.3 MEDIUM 0.2% exploit odds Fix listed
  29. CVE-2026-99018

    In the Linux kernel, the following vulnerability has been resolved: riscv: entry: gate shadow call stack reload on sstatus.SPP, not tp Under CONFIG_SHADOW_CALL_STACK, handle_exception() reloads the kernel shadow call stack pointer (gp) only when the trap came from userspace. It made that decision with scs_load_current_if_task_changed, which compares the trap-time tp (read back from sscratch into s5) against the current tp: beq \prev, tp, _skip_scs scs_load_current _skip_scs: tp is a user-writable register. A user task that sets tp to the linear-map address of its own task_struct (&current) before trapping makes the comparison succeed (can achieve by brute force with KASLR enable under our test), so the kernel skips scs_load_current and keeps running with the gp that userspace left in place. Under CONFIG_SHADOW_CALL_STACK gp is the shadow call stack pointer and load_global_pointer is a no-op, so the compiler-emitted "sd ra, -8(gp)" / "ld ra, -8(gp)" in every non-leaf function then write to, and return through, an attacker-controlled address -- an unprivileged kernel arbitrary-write and control-flow-hijack primitive. The poisoned gp is saved to task_struct.scs_sp on return, so the reload is skipped on every subsequent entry as well. Decide "came from userspace" from the hardware sstatus.SPP bit (already in s1 at this point) instead of from tp, mirroring the check that ret_from_exception already uses a few instructions later. SPP is written by hardware on trap entry and cannot be forged from U-mode. Legitimate behaviour is unchanged: user entries (SPP=0) reload the task shadow call stack, nested kernel entries (SPP=1) skip it.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  30. CVE-2026-100081

    In the Linux kernel, the following vulnerability has been resolved: xen-netback: defer xenvif_mcast_addr_list_free() In order for the function to legitimately avoid locking/RCU, it needs to run after all TX/RX processing has finished/stopped: Lookups happen from xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action() (called out of xenvif_poll()). Move the call out of xenvif_disconnect_data() (the call to the function from connect()'s error path doesn't require any cleaning up there), and put it past the synchronization point in backend_disconnect(). This is XSA-527 / CVE-2026-100081.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  31. CVE-2026-12967

    The WCFM Membership WordPress plugin before 2.12.1 does not verify that payment was made before completing a paid membership, allowing any authenticated Subscriber/Customer to activate a paid vendor membership for free and gain the marketplace vendor role.

    Other Web app

    6.5 MEDIUM 0.2% exploit odds No fix listed
  32. CVE-2026-119675

    MongoDB Database Tools mongorestore inconsistently handles the system.buckets. prefix when validating collection names in an untrusted dump. A specially crafted collection name can bypass special-collection guards and operator namespace filters, causing a restore to create an unauthorized user-chosen database account, including an account with the root role. Exploitation requires an operator to restore unauthorized user-controlled data using credentials with sufficient user-management privileges on the destination deployment. Excluding the admin namespace alone does not prevent this behavior. This issue affects MongoDB Database Tools versions 100.4.0 through versions before 100.20.1.

    Other Server

    5.2 MEDIUM 0.2% exploit odds No fix listed
  33. CVE-2026-119148

    Incomplete string validation in AWS aws-nitro-enclaves-sdk-c before 0.4.6 may allow a third party to impersonate the AWS KMS endpoint. To remediate this issue, users should rebuild any custom enclave image against aws-nitro-enclaves-sdk-c 0.4.6.

    Other Library

    8.2 HIGH 0.2% exploit odds Fix listed
  34. CVE-2026-99202

    In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix SMP IO deadlock during HA resume smp_execute_task_sg() calls pm_runtime_get_sync() on the host before issuing an SMP command. When that command is itself issued from the HA resume path, the get_sync() deadlocks: it waits for the ongoing resume (the device is RPM_RESUMING), while the resume is blocked in sas_drain_work() waiting for that same SMP IO to complete. The deadlock needs an expander-attached SATA disk. During sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata() -> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() -> sas_phy_reset() -> sas_smp_phy_control() -> smp_execute_task_sg()). Direct-attached SATA resets through lldd_control_phy() and SSP devices use TMFs, so neither hits this. Replace the get_sync()/put_sync() pair with pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only needs to hold off autosuspend while the SMP is in flight, and it must not try to resume the host: a sync resume issued from the HA resume path itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init has already reinitialized the hardware, so the device is accessible without one. The usage reference is still required. Discovery work normally runs inside an event worker's PM reference, taken at sas_notify_port_event() notify time and held until the handler has flushed the disco queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN from within the revalidation worker itself, and flush_workqueue() does not wait for work items queued during execution, so that chained revalidation runs with no outer PM reference - without the get_noresume(), its SMP could race autosuspend. For the BSG path, sas_smp_handler() is the only caller which may find the host autosuspended: expander SMP requests do not go through any SCSI device request queue, so nothing else in that path holds the host awake. Resume it there with pm_runtime_resume_and_get() and check the result.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-99191

    In the Linux kernel, the following vulnerability has been resolved: calipso: keep BIG TCP payload_len in calipso_skbuff_setattr() calipso_skbuff_setattr() adjusts payload_len by the length of the option it inserts or resizes: payload = ntohs(ip6_hdr->payload_len); ip6_hdr->payload_len = htons(payload + len_delta); GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores payload_len == 0 for them; ipv6_payload_len() then falls back to skb->len. For such a packet forwarded to a destination mapped to CALIPSO, the code above writes len_delta (or 65536 + len_delta when shrinking) into payload_len, and ipv6_payload_len() no longer falls back to skb->len. nf_tables, conntrack and sch_cake rely on it. The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN, and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its real length back. Set payload_len from the skb length with ipv6_set_payload_len(), which stores 0 above IPV6_MAXPLEN and the real length otherwise, as ipv6_gro_complete() does. The network header was just reset to skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length. Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal mdp-generated policy (network_peer_controls=1), "netlabelctl calipso add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO DOI 16. calipso_skbuff_setattr() was called through netlbl_skbuff_setattr() from a test-only debugfs hook (not part of this patch) adding a level-only label; payload_len after the call: case before fix after fix real length 1000, unlabeled 1016 1016 1016 70000 GSO, payload_len 0 16 0 70016 65530 GSO, grows past MAXPLEN 10 0 65546 65540 GSO with a 24 byte hop header, shrinks below MAXPLEN 65528 65532 65532 1000 with a 24 byte hop header 992 992 992 (0 means ipv6_payload_len() returns the real length.) On the forward path, with a client injecting unlabeled UDP through a router to a server, the router adds the CALIPSO option and the server delivers all datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-99187

    In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pmu_migrate_context() leaving events behind __perf_pmu_remove() walks the group leaders of a CPU and PMU with perf_event_groups_for_cpu_pmu(), removing each one as it goes. perf_remove_from_context() takes the leader out of the groups rbtree, after which rb_next() on that node returns NULL, prematurely ending the walk. Other groups stay behind in the source context. On CPU hotplug, they are then torn down with the dying CPU. They keep running until teardown, while the PMU's interrupt and migrated events are on a new CPU, which drivers rely on never happening. Walk ctx->event_list instead and pick out the PMU's events by their pmu_ctx.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-99178

    In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context An async #PF "page not present" event arrives through the #PF vector, and its reason sits in the per-CPU apf_reason.flags until __kvm_handle_async_pf() reads and clears it. If an NMI arrives after the event is injected and before the #PF handler reads the flags, and the NMI handler itself takes a #PF, that fault reads and clears the flags belonging to the #PF it interrupted. It then finds interrupts disabled in the NMI context it interrupted, and panics: Kernel panic - not syncing: Host injected async #PF in interrupt disabled region Call Trace: <NMI> panic+0x52/0x60 __kvm_handle_async_pf+0xb0/0xb0 exc_page_fault+0x71/0xb0 asm_exc_page_fault+0x27/0x30 RIP: 0010:__get_user_nocheck_8+0x6/0x20 perf_callchain_user+0x147/0x1a0 get_perf_callchain+0x12d/0x1c0 ... perf_event_nmi_handler+0x26/0x50 exc_nmi+0xe8/0x110 RIP: 0010:asm_exc_page_fault+0x0/0x30 </NMI> The last RIP line shows the NMI landing on the first instruction of the #PF entry. perf with user call chains takes such a fault: the sampling NMI walks the user stack with __get_user(), which faults when a saved frame pointer is not a valid user address or the walk runs off the top of the stack. The same window exists when KVM, running as an L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after a #PF VM-exit. The NMI entry code saves and restores CR2 for this nesting, but not the async #PF reason. Andy Lutomirski described the race, with perf as the example, when async #PF delivery was reworked in 2020 [1]. Saving and clearing the flags across the NMI, next to CR2, was discussed there but not merged. Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS, so the host delivers "page not present" only for user mode faults and a kernel-mode fault in NMI context (including kernel-mode #MC and #DB) cannot be an async page fault. In that case, return without touching the flags so that the interrupted handler finds them intact. Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot whose memory is served on demand through userfaultfd, so that reading it back takes async #PFs, while every thread samples hardware cycles with user call chains and points its frame pointer at an unmapped page. Without this patch the guest panicked as above in 3 of 3 runs. With it, the guest survived 3 of 3 runs of 60 seconds, and the host counted 148,441 to 153,334 kvm_async_pf_not_present events in the first 20 seconds of each. On 6.18.50 the results were the same: the guest panicked without the patch and survived with it.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99172

    In the Linux kernel, the following vulnerability has been resolved: ipc: drop the mqueue mount with kern_unmount() on setup failure mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its ->mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain mntput(). With ->mnt_ns set that takes the fast path of mntput_no_expire(). The count drops to zero and nothing ever kills the mount, so the mount and the mqueue superblock are leaked. Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace") added the first failure path after mq_init_ns() and never dropped the mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on sysctl setup failure") tried to fix that with a mntput() but that doesn't help for a long-term mount. Use kern_unmount(). free_ipc() open-codes the same thing for a namespace that made it.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-99147

    In the Linux kernel, the following vulnerability has been resolved: drm/exec: don't immediately add prelocked obj to array of locked objs When a contention is detected the drm_exec object grabs a reference to the contended object, unlocks all other objects and pre-locks the contended one before anything else. The problem is that it is possible that this pre-locked object was about to be destroyed and drm_exec is now holding the last reference to it. So we never actually see this pre-locked object again to be explicitly locked and so also never reserve a slot for a dma_fence object on it. Should the driver now use drm_exec_for_each_locked_object() to add a new fence to all locked objects we eventually see a warning or even a BUG_ON() to prevent random memory corruption. Fix this by keeping the prelocked object out of the array of locked objs until it was explicitly mentioned by the driver again. If the prelocked object is never mentioned again by the driver just unlock and drop the reference at the end of the locking loop.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-98986

    In the Linux kernel, the following vulnerability has been resolved: namespace: remove the fsnotify marks of a mount namespace in process context mnt_ns_release() drops the last passive reference of a mount namespace and removes its fanotify marks via fsnotify_mntns_delete(). That takes the mutex of every group with a mark on the namespace and the spinlock of the connector. Fine from process context. But mnt_ns_tree_remove() hands the reference the namespace was allocated with to call_rcu() and so the marks are removed from the RCU softirq: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:623 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3 __mutex_lock+0x113/0x24b0 fsnotify_destroy_marks+0x11b/0x3d0 mnt_ns_release_rcu+0x57/0xa0 rcu_core+0x6b6/0x1e40 and lockdep complains about the connector lock being taken from softirq context. A fanotify group with a FAN_MARK_MNTNS mark on the mount namespace of another task is all that's needed. Root in a user namespace can do that for a mount namespace it owns. The task exits and the namespace is freed with the mark still on it. Remove the marks in free_mnt_ns() before the namespace is handed to RCU. That runs in process context once the last active reference is gone. A mark is added through a file descriptor to the namespace which holds an active reference so no mark can show up after that.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-98958

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: account non-AQL frames per peer rather than per link The driver increments wcid->non_aql_packets when a frame goes to the hardware queue. The completion path decrements the counter again. For an MLO peer, the hardware reports the completion on the link that it used for the transmission. This link can differ from the link that the driver queued the frame on. In that case, the increment and the decrement go to different link wcids, and the count drifts upwards until it blocks the station. Keep the count on the wcid of the primary link, like the other peer-wide state.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-98963

    In the Linux kernel, the following vulnerability has been resolved: btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio If all bios finish before btrfs_encoded_read_regular_fill_pages() returns, it calls btrfs_uring_read_extent_endio() and previously returned the I/O status. A negative errno then made btrfs_uring_read_extent() unlock and free while btrfs_uring_read_finished() did the same again. Return -EIOCBQUEUED so only the deferred path cleans up.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-98919

    In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has several corner-case issues flagged during review: 1. If xe_gt_clock_init() failed to recognise the crystal clock, gt->info.timestamp_base is 0, which makes idledly_units_ps also 0. The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a divide-by-zero and panics the kernel. 2. The tick-to-ns conversions are done in u32: idledly * idledly_units_ps, (maxcnt - 1) * 1000 Both overflow u32 before DIV_ROUND_CLOSEST() sees them. 3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32. 4. The register only stores whole ticks, so the clamped ns value has to be converted to ticks and back. DIV_ROUND_CLOSEST() can round that conversion up past maxcnt: maxcnt = 640 ns, one tick = 666664 ps clamp: maxcnt - 1 = 639 ns ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick tick -> ns: 1 * 666664 / 1000 = 667 ns 667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640), so xe_gt_WARN_ON() fires again on every subsequent init. Return early if timestamp_base is 0 (the unknown-crystal path). Do the conversions in u64 via the *_ULL() helpers so they cannot wrap. Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is cleared. v2: Drop the redundant warn on the timestamp_base == 0 path; xe_gt_clock_init() already warns on an unrecognised crystal clock. Keep the early return to avoid the divide-by-zero. - Vinay v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...) instead of writing the raw tick count, which could clobber INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the inhibit-switch clear from the maxcnt clamp so a set inhibit bit no longer forces a needless delay overwrite when the delay itself is already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt). (cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-98910

    In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unwind debug trap enable on copy_to_user failure If kfd_dbg_trap_enable() fails while copying runtime_info to userspace, it had already activated the trap, set debug_trap_enabled, taken an extra process reference, and opened the debug event file. Return -EFAULT without unwinding that state, leaving inconsistent trap state and a refcount imbalance that could break later DISABLE/ENABLE. On copy_to_user failure, deactivate the trap and undo the rest of the enable setup before returning.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-98913

    In the Linux kernel, the following vulnerability has been resolved: net: thunderx: fix PTP device ref leak in nicvf_probe() cavium_ptp_get() acquires a reference to the PTP PCI device through pci_get_device(). If any initialization step fails after cavium_ptp_get(), the PTP PCI device reference is leaked. Add a common error path to release the PTP reference before returning from probe failures.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-98915

    In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: use vb2_video_unregister_device on driver removal The driver uses vb2_fop_release() as its file release operation, so vb2_video_unregister_device() should be used instead of video_unregister_device() during driver removal. This ensures that the vb2 queue is properly disconnected before the video device is unregistered.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-98901

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix lease break and ack state handling Do not skip valid lease states containing WRITE_CACHING when breaking level-II/read leases for writes and truncates. Handle lease break acknowledgments according to the SMB2 rule that the acknowledged state must be a subset of the server's break target. Apply the acknowledged state directly and keep the break pending on failed ACKs.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-98908

    In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: clean up PSFP resources on flower setup failure sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and stream filter resources before adding VCAP actions. If a later step fails, the resources allocated earlier in the function are not unwound. Add error paths to release the stream filter, flow meter and stream gate when setup fails after they have been acquired. Also make sparx5_psfp_fm_add() return the acquired flow-meter id before the existing-flow-meter early return. When an existing flow meter is reused, sparx5_psfp_fm_get() increments its pool reference count, but the caller previously kept psfp_fmid as 0. If a later setup step failed, the error path could try to delete flow-meter id 0 instead of the reused flow meter, leaving the incremented reference behind.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-98880

    In the Linux kernel, the following vulnerability has been resolved: ntfs3: handle set_blocksize failures ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-89115

    SAP Start Service and SAP Management Console store sensitive credential information in process memory without protection. An attacker with high privileges and local access could inspect the memory to recover credentials and reuse them for authentication. This results in a high impact on confidentiality and no impact on integrity and availability.

    Other

    4.4 MEDIUM 0.2% exploit odds No fix listed