The internet is broken right now.
65 critical CVEs without a fix in the last 48 hours. Developers are crying quietly into their IDEs. 151 more already have a fix that someone still has to apply.
-
CVE-2026-99307
In the Linux kernel, the following vulnerability has been resolved: ceph: require the dentry lease record to cover struct ceph_mds_reply_lease parse_reply_info_lease() reads a 32-bit struct_len off the wire and only checks that many bytes are present, without requiring struct_len to cover sizeof(struct ceph_mds_reply_lease) (10 bytes). A malicious MDS can declare a shorter record and still get the pointer published: the following *p += sizeof(**lease) overshoot is undone by *p = lend, so nothing downstream rejects the reply. ceph_fill_trace() -> update_dentry_lease() then reads 10 bytes through that pointer on any lookup on a mounted CephFS, running past the end of the message front. Require the record to cover the structure, matching the sibling parse_reply_info_dir(). A conforming MDS always encodes the full 10 bytes. BUG: KASAN: slab-out-of-bounds in __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) Read of size 4 at addr ffff888026c63d65 by task kworker/0:3/2366 Workqueue: ceph-msgr ceph_con_workfn Call Trace: __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) ceph_fill_trace (fs/ceph/inode.c:1474 fs/ceph/inode.c:1823) mds_dispatch (fs/ceph/mds_client.c:4229 fs/ceph/mds_client.c:7225) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address is located 357 bytes inside of allocated 360-byte region [ffff888026c63c00, ffff888026c63d68)
-
CVE-2026-99302
In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: reject short connection requests nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The iWARP path allocates exactly the peer-provided length, so a six-byte MPA request reaches the parser and the hsqsize load reads two bytes past the allocation. Require the complete request structure before reading any of its fields. The decoded KASAN report is: BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41 Workqueue: iw_cm_wq cm_work_handler Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) cma_cm_event_handler (drivers/infiniband/core/cma.c:2181) iw_conn_req_handler (drivers/infiniband/core/cma.c:2640) cm_work_handler (drivers/infiniband/core/cm.c:2502 drivers/infiniband/core/cm.c:3858) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Allocated by task 12: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_node_track_caller_noprof (mm/slub.c:5414 mm/slub.c:5545) kmemdup_noprof (mm/util.c:138) cm_event_handler (drivers/infiniband/core/iwcm.c:194 drivers/infiniband/core/iwcm.c:1076) siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408) siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750) siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086) The buggy address is located 0 bytes to the right of allocated 6-byte region [ff1100010459d360, ff1100010459d366)
-
CVE-2026-99304
In the Linux kernel, the following vulnerability has been resolved: ceph: fix integer overflow in the snap trace bounds check ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps + num_prior_parent_snaps). Both counts come straight off the wire as __le32, so the addition is evaluated in unsigned int and wraps before sizeof(u64) promotes it to size_t: an MDS sending num_snaps = 1 and num_prior_parent_snaps = 0xffffffff makes the sum zero and the check degenerates to ceph_decode_need(&p, e, 0, bad), which always passes. dup_array() then reads num_snaps * 8 bytes past the end of the message front, which ceph_msg_new2() allocates at exactly front_len bytes. An unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or compromised MDS with no client-side action, as do the snaptraces carried in an MDS reply and in a cap import. Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX instead of wrapping, in the style fs/ceph/mdsmap.c already uses for num_export_targets. BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) ceph_update_snap_trace (fs/ceph/snap.c:836) ceph_handle_snap (fs/ceph/snap.c:1155) mds_dispatch (fs/ceph/mds_client.c:7234) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 0 bytes to the right of allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8)
-
CVE-2026-99301
In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.
-
CVE-2026-99295
In the Linux kernel, the following vulnerability has been resolved: smb: client: stop processing a read response after a receive error cifs_read_iter_from_socket() may call cifs_reconnect() before returning an error. The reconnect path aborts pending mids and invokes their callbacks. The callback can then release the cifs_io_subrequest containing rdata. cifs_readv_receive() nevertheless continues after a negative return and may dereference rdata in cifs_readv_discard(). KASAN reports the resulting UAF: BUG: KASAN: slab-use-after-free in cifs_readv_receive Read of size 4 by task cifsd cifs_readv_receive (fs/smb/client/transport.c:1284) cifs_demultiplex_thread (fs/smb/client/connect.c:1355) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Freed by task 148: netfs_put_subrequest (fs/netfs/objects.c:267) netfs_read_collection (fs/netfs/read_collect.c:460) netfs_wait_for_in_progress (fs/netfs/misc.c:462) Return the socket error immediately, as this path did before the iterator conversion. This also avoids adding a negative length to total_read.
-
CVE-2026-99297
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix double free in em28xx_alloc_urbs When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs() explicitly frees all items within usb_bufs->buf before calling em28xx_uninit_usb_xfer(), which also frees these items, causing them to be freed twice. BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) Free of addr ffff88802fd37c00 by task kworker/1:2/1182 Workqueue: events request_module_async Call Trace: kasan_report_invalid_free (mm/kasan/report.c:557) check_slab_allocation (mm/kasan/common.c:235) kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1)) usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) usb_free_urb (drivers/usb/core/urb.c:95) em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439) em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Freed by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer() handle the cleanup.
-
CVE-2026-99290
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free after a failed durable reconnect ksmbd_reopen_durable_fd() republishes a detached durable handle in the reconnecting session's file table and takes no reference for that entry. If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to remove the volatile id. Two reconnects of the same handle can both take a lookup reference before either attaches it. If the one that reopens first then fails and drops its references first, the other request makes the final put through ksmbd_put_durable_fd(). That frees the handle without removing the first session's table entry, so tearing that session down writes to freed memory. BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd] Call Trace: __close_file_table_ids+0x14d/0x740 [ksmbd] ksmbd_destroy_file_table+0x76/0x100 [ksmbd] ksmbd_session_destroy+0xf8/0x480 [ksmbd] ksmbd_dispose_sessions+0x13e/0x200 [ksmbd] ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd] Freed by task 1030: __ksmbd_close_fd+0x97d/0x1000 [ksmbd] smb2_open+0x14eb/0xd9f0 [ksmbd] Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file lifetime") handles a final put made by the reconnecting request, but not one made by another holder. Remove the volatile id under the file-table lock on this error path, before the references are dropped, as ksmbd_close_fd() does on the request_open path just above. Removal then no longer depends on which holder makes the final put. The stale comment in the reconnect cleanup is updated to match. A successful reconnect is unchanged.
-
CVE-2026-119055
CWE- 416: Use After Free vulnerability exists that could cause arbitrary code execution when a local attacker could trick the end user to open a specially crafted malicious SSD file.
-
CVE-2026-95867
IBM SevOne Network Performance Management 7.0.0 through 8.2.2 could allow a local attacker to execute arbitrary code due to a buffer overflow.
-
CVE-2026-99282
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: fix use-after-free on lower qdisc drop The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return value against NETDEV_TX_OK alone. A slave that consumes the skb but returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated as if the skb were still owned, so the loop restores skb->dev and calls __skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit() from its ndo_start_xmit() (propagated since cbbef5e18307), and when the lower qdisc drops the packet that value is NET_XMIT_DROP after the skb has been freed, giving a use-after-free in teql_master_xmit(). The Fix: test for consumption with dev_xmit_complete(), which accepts NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps the packet counted in tx_packets/tx_bytes and advances the slave; a consumed result that is neither a success nor NET_XMIT_CN ends the attempt and is charged to tx_dropped, so lower-qdisc drops are no longer reported as good transmits. NET_XMIT_CN is counted like success because it can accompany acceptance of the current packet: pfifo_head_drop drops the old head, enqueues the current skb and returns NET_XMIT_CN. Conditions to recreate the bug: With CONFIG_NET_SCH_TEQL, CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0 and a teql0 root on lkrvlan0; bring teql0 up with an address and send one UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower qdisc while holding a freed skb.
-
CVE-2026-99271
In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Clear prev_fbuf on capture buffer release A KASAN slab-use-after-free read was reported in submit_audio_out_urb() when generating an impulse test signal: BUG: KASAN: slab-use-after-free in create_impulse_test_signal sound/usb/line6/playback.c:76 [inline] BUG: KASAN: slab-use-after-free in submit_audio_out_urb+0x1848/0x1b20 sound/usb/line6/playback.c:249 Read of size 2 at addr ffff888008d74870 by task syz.2.3214/7785 Allocated by task 11: kmem_cache_alloc_noprof+0x2f0/0x390 mm/slub.c:4144 line6_buffer_acquire+0x1a1/0x220 sound/usb/line6/pcm.c:158 line6_pcm_acquire+0xb6/0x230 sound/usb/line6/pcm.c:329 line6_startup_work+0x3c/0x50 sound/usb/line6/driver.c:728 Freed by task 7785: kfree+0xf8/0x390 mm/slub.c:6566 line6_buffer_release sound/usb/line6/pcm.c:176 [inline] line6_buffer_release+0xa5/0xf0 sound/usb/line6/pcm.c:170 __line6_pcm_release sound/usb/line6/pcm.c:305 [inline] line6_pcm_release+0x5a/0x80 sound/usb/line6/pcm.c:313 snd_toneport_monitor_put+0x11b/0x190 sound/usb/line6/toneport.c:183 line6pcm->prev_fbuf points into the capture PCM stream buffer (line6pcm->in.buffer), which is updated during audio_in_callback() to feed rate synchronization, software monitoring, and impulse test signal generation on playback side. When all capture streams are closed, line6_buffer_release() frees pstr->buffer with kfree(). However, it does not clear line6pcm->prev_fbuf. If playback is subsequently started (e.g. via impulse test signal volume control snd_line6_impulse_volume_put()), submit_audio_out_urb() dereferences the stale pointer line6pcm->prev_fbuf under in.lock, resulting in a slab-use-after-free read. Clear prev_fbuf and prev_fsize in line6_buffer_release() when releasing the capture stream buffer under in.lock, ensuring that no stale buffer pointer can be accessed by submit_audio_out_urb().
-
CVE-2026-99272
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the data area in SMB2_read() SMB2_read() copies le32_to_cpu(rsp->DataLength) bytes from (char *)rsp + rsp->DataOffset without checking that the range lies within the response actually received. A READ response with DataOffset == 0 makes smb2_get_data_area_len() zero the data length, so smb2_check_message() accepts a frame as short as the fixed response, while SMB2_read() still uses the server-supplied DataLength, capped only by CIFS_MAX_MSGSIZE and the caller's length. A malicious server can answer the synchronous read used by the mfsymlinks (or SFU) symlink parser with an 81-byte READ response carrying DataOffset 0 and DataLength 1067, making the client copy 1067 bytes from a 448-byte receive object (KASAN slab-out-of-bounds; up to 16 KiB in the general case). Clamp a zero (or header-overlapping) DataOffset to read_rsp_size, as handle_read_data() does for the asynchronous path, and reject the response unless DataOffset + DataLength fits within rsp_iov.iov_len. The SMB1 helper was fixed the same way in 5be5bdda5863.
-
CVE-2026-99273
In the Linux kernel, the following vulnerability has been resolved: ksmbd: reserve space for the UTF-16 terminator in stream info smb_strtoUTF16() always writes a terminating zero UTF-16 unit after the converted characters, but get_file_stream_info() budgets only sizeof(struct smb2_file_stream_info) + streamlen * 2 for a stream entry and sizeof(struct smb2_file_stream_info) + 7 * 2 for the trailing "::$DATA" entry. When an entry exactly fills the 448-byte small response buffer, the terminator is written two bytes past the allocation. Reserve one extra UTF-16 unit in both budget checks. The terminator is not part of the wire format, so the reported lengths are unchanged.
-
CVE-2026-99274
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix fiemap wild read on empty truncated response smb3_fiemap() treats -E2BIG from SMB2_ioctl() as a truncated range blob and loops for the next chunk. If the server reports STATUS_BUFFER_OVERFLOW with OutputCount == 0, SMB2_ioctl() returns -E2BIG with out_data == NULL and out_data_len == 0, and the existing length checks accept the empty result. The loop then evaluates next = out_data[num - 1].file_offset + ... with num == 0, reading 16 bytes before NULL. Reject a truncated range blob that contains no range, so the resume offset is never computed from an empty response. Also require the last range in a truncated blob to advance the resume offset without overflowing, and to stay within the requested range; a malicious or broken server could otherwise make no progress or underflow len and loop forever. Free the previous response buffer before retrying. Reproduced on 6.6.87.2 with a malicious SMB2 server that answers FSCTL_QUERY_ALLOCATED_RANGES with STATUS_BUFFER_OVERFLOW and OutputCount == 0; an FS_IOC_FIEMAP ioctl on the mount oopses in cifs_fiemap() with CR2 = fffffffffffffff8. The code path is unchanged on mainline.
-
CVE-2026-120456
L-SMASH through 2.14.5 contains a heap out-of-bounds write vulnerability in isom_read_hdlr() and isom_read_dref_entry() in core/read.c triggered by oversized box sizes. Attackers can supply crafted MP4 or MOV files declaring hdlr or url box sizes larger than remaining data, stalling the stream position and corrupting heap memory to crash applications.
-
CVE-2026-113942
An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination or read kernel memory.
-
CVE-2026-99050
In the Linux kernel, the following vulnerability has been resolved: gpio: mpsse: fix race when arming the IRQ poll worker gpio_mpsse_irq_enable() arms the poll worker before publishing it: schedule_work() runs before the worker is added to priv->workers. If gpio_mpsse_disconnect() walks the list in that window it misses the worker, and once disconnect returns, the USB core frees mpsse_priv while the orphaned gpio_mpsse_poll() work keeps accessing it, causing a use-after-free. Fix this by publishing and arming the worker in one irq_spin critical section. Teardown walks the same list under irq_spin, so a worker found on the list is guaranteed to be armed, and cancel_work_sync() handles it whether it is queued or running. A worker armed after the disconnect walk would still be missed, so also set a new priv->dying flag under irq_spin before the teardown walk, and check it in the same critical section, freeing it via kfree_rcu() instead when the device is going away, since kfree() would be called with the IRQ core's raw spinlock held and may sleep on PREEMPT_RT. schedule_work() is safe to call with irq_spin held, and the next probe gets a fresh mpsse_priv, so the flag never needs to be cleared. This issue was found by an in-house static analysis tool.
-
CVE-2026-98991
In the Linux kernel, the following vulnerability has been resolved: namespace: queue a mount only once for mount notifications mnt_notify_add() puts a mount on notify_list. It doesn't check whether the mount is on the list already. That's fine as long as every mount is queued at most once per namespace_sem hold. It isn't. propagate_umount() moves a surviving overmount off a stack of mounts that are going away and queues it as moved. shrink_submounts() and mark_mounts_for_expiry() call umount_tree() for several mounts under a single namespace_sem hold. So the second umount_tree() can take down exactly the mount the first one reparented, reparent it once more and so end up queueing it a second time. The second list_add_tail() cuts the mounts queued in between out of the list while the head still points at the last of them. notify_mnt_list() then only visits that one mount and the others are freed after the grace period with notify_list still pointing at them. Every later mount operation on the host walks freed memory: BUG: KASAN: slab-use-after-free in __list_add_valid_or_report Read of size 8 at addr ffff8881003d57e0 by task notify_dq/162 __list_add_valid_or_report+0x15c/0x1a0 mnt_add_to_ns+0x322/0x890 attach_recursive_mnt.isra.0+0xf2a/0x1a00 path_mount+0x139c/0x1d40 This needs a mount with MNT_SHRINKABLE to bind from. That's what finish_automount() creates (submounts of NFS, AFS and CIFS and the tracefs mount below debugfs). Bind mounts inherit the flag. A mount namespace with a FAN_MARK_MNTNS mark does the rest and root in a user namespace can have both. Initialize to_notify in alloc_vfsmnt() and leave a mount alone that is queued already. mnt_notify() looks at the state the mount has when the list is drained so a single entry per mount is enough. The move event for a mount that is unmounted under the same hold is lost. That's fine. The detach is what matters.
-
CVE-2026-58844
In multiple locations, there is a possible out of bounds read/write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-20566
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, if a malicious actor has already obtained the System privilege. User interaction is needed for exploitation. Patch ID: MOLY01923663 / ALPS11315955; Issue ID: MSV-10866.
-
CVE-2026-119719
Blender before 4.5.15 and 5.x before 5.2.3 contains a heap buffer overflow vulnerability in the blend file thumbnail extractor caused by 32-bit integer overflow in thumb_data_vertical_flip(). Attackers can craft a .blend file with malicious TEST block dimensions that trigger an out-of-bounds write when blender-thumbnailer or the Windows shell extension previews it, causing crashes or code execution.
-
CVE-2026-99162
In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix use-after-free bug when adding shared proxies The GPIO lookup table can stay alive for longer than the kobject whose name string's address we're assigning to lookup->dev_id. Fix a potential UAF by duplicating the string.
-
CVE-2026-99144
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue A deferred reenqueue can read a freed user DSQ. The request stays on its CPU's deferred list until run_deferred() takes it, and the RCU callback that frees the DSQ assumes that the grace period has flushed it, so exit_dsq() checks the per-CPU node without the deferred list lock. A grace period waits for readers in flight, not for a pending run_deferred(). A run_deferred() which starts after the grace period began can detach the request right before the callback looks and then read the freed DSQ's id. Cancel the pending requests before the grace period instead. The irq work that frees the DSQ unlinks every CPU's request under the per-CPU deferred list lock, and schedule_dsq_reenq() ignores a new request under the same lock once the id is invalid. Only a run_deferred() that started before the grace period can hold a request, and it runs with IRQs disabled, so the grace period waits for it and nothing touches the DSQ after the callback.
-
CVE-2026-99149
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix GEM object leak on ENOMEM in userptr ioctl When amdgpu_hmm_range_alloc() fails amdgpu_gem_userptr_ioctl() returns -ENOMEM right away and skips the cleanup every other error path goes through. The GEM object, the bo->parent reference on the VM root and the MMU notifier registration are all left behind. Use release_object here, not user_pages_done, range is still NULL at this point. (cherry picked from commit bbe739e407a542073ec1a7872b14843566b4919e)
-
CVE-2026-99023
In the Linux kernel, the following vulnerability has been resolved: power: sequencing: pcie-m2: Fix leaking array from of_regulator_bulk_get_all() of_regulator_bulk_get_all() allocates the consumers array and hands it to the caller, who is expected to free it at an appropriate time. pwrseq-pcie-m2.c never did, leading to a memory leak. Add an explicit kfree() for the consumers array.
-
CVE-2026-98921
In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_do_mkdir() debug print ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir(). Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on failure."), vfs_mkdir() calls end_creating() on the input dentry on failure and may replace it on success, so the post-call %pd can use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled. Print the dentry before the call and only the result afterward.
-
CVE-2026-79892
A memory corruption vulnerability exists in AOS-8 that could allow an authenticated local attacker to execute arbitrary code. Successful exploitation could allow the attacker to execute arbitrary code as a privileged user on the underlying operating system.
-
CVE-2026-128991
xschem 2.9.9 through 3.4.7 contains an out-of-bounds read vulnerability in read_xschem_file() in src/save.c that mishandles embedded-symbol records lacking a preceding instance. Attackers can supply a crafted schematic beginning with a "[" record, causing xschem to read and dereference memory below the instance array and crash.
-
CVE-2026-126064
Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.5, the CRuby native extension can leave Ruby wrappers pointing to freed memory when Nokogiri::XML::Node#[]= or Nokogiri::XML::Node#lang= replaces an existing attribute value after code has accessed the attribute's child nodes. Replacing the value frees native child nodes while their wrappers remain reachable, and later use of those wrappers can cause an invalid read or process segfault. JRuby is not affected. This issue is fixed in version 1.19.5.
-
CVE-2026-125215
FFmpeg 7.1 through 9.0.2 contains a NULL pointer dereference vulnerability in ff_dovi_rpu_generate() in libavcodec/dovi_rpuenc.c that allows attackers to crash applications via crafted Dolby Vision RPU metadata. Attackers can supply streams with default or alternating omitted DM blocks to the dovi_rpu bitstream filter with compression enabled, causing denial of service.
-
CVE-2026-119086
Missing queue-set type validation in the queue-set selection system call in FreeRTOS-Kernel before V11.3.3 on MPU-enabled ports with queue sets enabled allows a local unprivileged task to write actor-controlled data beyond a pointer-sized object on the privileged kernel stack, affecting privileged memory across the MPU isolation boundary. To remediate this issue, users should upgrade to FreeRTOS-Kernel V11.3.3, rebuild, and reflash affected firmware. Builds that do not enable queue sets are not affected.
-
CVE-2026-61627
libass is a portable subtitle renderer for the `ASS`/SSA (Advanced Substation Alpha/Substation Alpha) subtitle format. Prior to 0.17.5, libass can overread and overwrite the glyph array in `wrap_lines_measure` while rendering malicious `ASS` content. In `wrap modes other than two`, a final line ending with a literal backslash-n sequence and otherwise consisting only of such sequences or spaces can remain after early trimming and make the line-measurement loops overshoot by one glyph. When the total text size exactly matches the allocated glyph-array capacity, the first loop reads an uninitialized 32-bit fixed-point `pos.x` value, although that value is not subsequently used. The second loop writes `pos.x` and `pos.y` beyond the array, zeroing the first and adding an attacker-controllable offset to the second. No actual exploitation beyond possible denial of service is known; broader exploitation is theoretical and constrained by the addresses, limited writes, and ASLR. This issue is fixed in version 0.17.5.
-
CVE-2026-99208
In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Zero OA buffer at allocation ttm_bo_type_kernel BOs are not guaranteed to be zeroed on allocation and may contain data from previously freed pages. Since the OA buffer is mmap'able by userspace, this can expose stale kernel memory contents. Streams opened with DRM_XE_OA_PROPERTY_OA_DISABLED allocate the OA buffer without calling xe_oa_init_oa_buffer(). Zero the buffer at allocation to prevent information disclosure through mmap. The existing zeroing in xe_oa_init_oa_buffer() remains necessary for zero report-id/timestamp detection on enable/re-enable. (cherry picked from commit 126c4c5388f9311a390b9b254a835b0cf0f55331)
-
CVE-2026-90833
The simulated EEPROM driver validated access ranges in eeprom_range_is_valid() (drivers/eeprom/eeprom_simulator.c) with a single test, (offset + len) <= config->size. Because offset is a signed off_t and len an unsigned size_t of the same rank, the addition is evaluated in unsigned arithmetic: a negative offset combined with a compensating len wraps the sum back into the accepted range. eeprom_sim_read() and eeprom_sim_write() then memcpy() through the EEPROM(addr) macro, which is plain pointer arithmetic on the driver's static mock_eeprom array, so the copy addresses memory located before that array. eeprom_read() and eeprom_write() are __syscall entry points, and their verification handlers in drivers/eeprom/eeprom_handlers.c check only the device object and the caller's own data buffer (K_SYSCALL_MEMORY_READ/K_SYSCALL_MEMORY_WRITE) — the offset argument is passed to the driver unvalidated. With CONFIG_USERSPACE=y, a CONFIG_EEPROM_SIMULATOR device instance, and the device object granted to a user thread (the usage the in-tree tests/drivers/eeprom/api suite exercises from ZTEST_USER threads), an unprivileged thread could supply a negative offset and have the kernel perform the copy on its behalf. The result is an out-of-bounds read of kernel .bss returned into the caller's buffer and, via the write path, an out-of-bounds write of caller-supplied bytes over kernel memory preceding mock_eeprom. Both the start address and the length of the affected span are attacker-selected, so the primitive is sufficient to corrupt adjacent kernel state and escape the user-mode sandbox. Exposure is limited to builds that instantiate the simulated EEPROM (status = "okay" by default on qemu_x86 and native_sim, otherwise added by a devicetree overlay) together with userspace isolation. The fix rejects negative offsets and performs the remaining bound check without overflow.
-
CVE-2026-103393
An Out-of-Bounds Read vulnerability in the VRRP implementation in Juniper Networks Session Smart Router allows an L2-adjacent attacker to read stale memory contents or cause a system fault via a specially crafted VRRPv3 advertisement.
-
CVE-2026-47486
NVIDIA PhysX for all platforms contains a vulnerability where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to code execution, data tampering, denial of service, information disclosure.
-
CVE-2026-113941
An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination or read kernel memory.
-
CVE-2026-113944
An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination or read kernel memory.
-
CVE-2026-113946
An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination or corrupt kernel memory.
-
CVE-2026-112417
An integer overflow was addressed with improved input validation. This issue is fixed in visionOS 27.2. Processing a maliciously crafted 3D model may lead to memory corruption.
-
CVE-2026-94202
The Module Manager's block-pool create dispatcher proved that two `ALIGN_TYPE` words of the extra-parameter array a memory-protected module supplies lay inside the module's data, and then used indices 0 through 3 of that array. One of the two unproved words is read by the dispatcher's own buffer check, which takes index 1 as the pool start and index 2 as the length to range-check it over. So the out-of-bounds read is performed by the validation code itself, before the kernel service is reached, and the size the caller's pool start is then validated against is a word the manager has not proved the module owns. The other unproved word is read when the service's argument list is built. Vulnerable function: `_txm_module_manager_tx_block_pool_create_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`.
-
CVE-2026-95107
A ThreadX module chooses `object_size` when it calls `txm_module_object_allocate`. The Module Manager adds its own 16-byte private header to that size and asked the object pool for the result **without checking the addition**. A size near the top of a `ULONG` wrapped, the pool served a block far smaller than the header, and the manager then wrote the header past the end of it and into the neighbouring byte-pool block.
-
CVE-2026-118752
FreeImage through 3.18.0 and the danoli3 FreeImage fork before 3.19.22 contain a heap buffer overflow vulnerability in the PBM RLE decoder of PluginIFF.cpp that lacks bounds checks on ByteRun1 runs. Attackers can supply a crafted IFF/LBM PBM file with runs straddling scanline ends to write up to 127 controlled bytes past the heap-allocated bitmap.
-
CVE-2026-47235
SimulationCraft is a tool to explore combat mechanics in World of Warcraft. In builds after release-820-01 and before the identified May 7, 2026 nightly, the `bcp_api.cpp` loop over the JSON `sockets` array uses `slot_data["sockets"].Size()` without bounding `gem_idx` by `MAX_GEM_SLOTS`, which is four in `engine/sc_enums.hpp`. The destination `gem_id` and `gem_bonus_id` arrays in `engine/item/item.hpp` have only four elements. More than four socket entries therefore write beyond `gem_id` into the adjacent `gem_bonus_id` vector storage; `bonus_list` entries can also access `gem_bonus_id` out of bounds. Corrupting a vector's `_M_start` pointer causes the `item_t` destructor to free an attacker-influenced pointer during normal cleanup. The advisory reports crashes and code execution demonstrated in a testing environment. Attack inputs can arrive through a malicious `.simc` profile with a `[[equipment]]` section, a compromised addon export, or `Battle.net API` responses modified by an attacker with a privileged network position. The fix is contained in the nightly build identified as simc-1205-01-516b5d7; no containing release tag is available.
-
CVE-2026-99051
In the Linux kernel, the following vulnerability has been resolved: fsverity: RCU-delay the freeing of struct fsverity_info __fsverity_get_info() calls rhashtable_lookup_fast(), which just uses rcu_read_lock() and doesn't directly synchronize with fsverity_remove_info(). For the same inode this isn't a problem: its fsverity_info is removed only at inode eviction time or upon failure to enable verity, when the inode no longer needs its fsverity_info and it will no longer be accessed via that inode. However, this is broken and can cause a use-after-free for concurrent __fsverity_get_info() for *different* inodes. Those rely on following fsverity_info::rhash_head in the rhashtable under rcu_read_lock() only. They also use fsverity_info::inode to do the key comparison. Fix this by RCU-delaying the freeing of 'struct fsverity_info' after it's been removed from the rhashtable.
-
CVE-2025-54503
Improper handling of overlap between protected memory ranges in the Secure Encrypted Virtualization (SEV) firmware could allow a privileged attacker to cause misconfigurations in the RMP potentially resulting in loss of integrity.
-
CVE-2026-120757
HDF5 through 2.2.0 contains a heap buffer over-read vulnerability in H5L__extern_traverse() in src/H5Lexternal.c, the default traversal callback for external links. The callback locates the target file name and object path within the link’s user data using strlen() without validating the buffer against its stored size (udata_size, which was marked unused). A crafted HDF5 file containing an external link whose data is not NULL-terminated, or is too short to hold both strings, causes strlen() to read past the end of the udata heap buffer, and the derived object path pointer may also point outside the buffer. The overrun is unbounded and continues until a zero byte is found. The flaw is triggered when the malicious link is traversed, for example when opening an object through it. An attacker who can get a user or application to access a crafted file can cause a denial of service, and adjacent heap contents may be incorporated into the external file name or object path the library attempts to open.
-
CVE-2026-118608
Alpine iLX-F511 libanwbtstack.so prh_rfcomm_cc_process_test Out-Of-Bounds Read Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of Alpine iLX-F511 devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability. The specific flaw exists within the prh_rfcomm_cc_process_test function. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-29018.
-
CVE-2026-116502
A flaw has been found in turboderp-org ExLlamaV2 up to 0.3.2. The impacted element is the function QMatrix::make_sequential of the file exllamav2/exllamav2_ext/cuda/q_matrix.cu of the component GPTQ Index Handler. Executing a manipulation of the argument g_idx can lead to out-of-bounds write. The attack needs to be launched locally. The project was informed of the problem early through an issue report but has not responded yet.
-
CVE-2026-113935
An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination.