CVE-20XX-?
agent?

The internet is broken right now.

67 critical CVEs without a fix in the last 48 hours. Somewhere a staging server is public. It always is. 149 more already have a fix that someone still has to apply.

32 CVEs · updated 2026-11-18 22:26 UTC

Reset all
  1. CVE-2026-129353

    A vulnerability was detected in D-Link DIR-600L 2.17/2.17b02. Affected by this vulnerability is the function authenticationcgi_main of the file authentication.cgi. Performing a manipulation of the argument id/password results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used.

    Memory safety Network gear

    9.3 CRITICAL 2% exploit odds No fix listed
  2. CVE-2026-129354

    A flaw has been found in D-Link DIR-600L 2.17b02. Affected by this issue is the function hnap_main of the file htdocs/cgibin of the component HNAP Handler. Executing a manipulation can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been published and may be used.

    Memory safety Network gear D-Link DIR-600L

    9.3 CRITICAL 0.9% exploit odds No fix listed
  3. CVE-2026-129352

    A vulnerability was detected in TRENDnet TEW-657BRM 1.00.1. This issue affects some unknown processing of the file /usr/sbin/upgrade_flash.cgi. Performing a manipulation of the argument boundary results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor explains: ""I am not able to confirm if such vulnerability exists as the product has been EOL for more than 15 years. We will send out an announcement letting customers know."

    Memory safety Network gear

    8.5 HIGH 0.8% exploit odds No fix listed
  4. CVE-2026-129250

    A security vulnerability has been detected in Edimax BR6478ACV2 1.23. The impacted element is the function formPPTPSetup of the file webs. The manipulation of the argument pptpUserName leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Memory safety Network gear

    8.6 HIGH 0.8% exploit odds No fix listed
  5. CVE-2026-130875

    tac_plus-ng before commit d8493e0 contains a stack-based buffer overflow vulnerability that allows clients holding the TACACS+ shared key to overflow a stack buffer due to an operator precedence error in author_pak_looks_bogus() and accounting_pak_looks_bogus(). Attackers can send packets whose argument-length table exceeds the payload, causing eval_args() to read past the packet and memcpy() oversized cmd values into cmdline, crashing the daemon or executing code.

    Memory safety Network gear

    7.7 HIGH 0.5% exploit odds Fix listed
  6. CVE-2026-129453

    A vulnerability was found in DrayTek Vigor2960 1.5.1.6. This issue affects the function check_file_exist of the file /cgi-bin/mainfunction.cgi of the component File Existence Check. Performing a manipulation of the argument upload_name results in heap-based buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used. Upgrading to version 1.5.1.7 is capable of addressing this issue. Upgrading the affected component is recommended. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported."

    Memory safety Network gear

    8.6 HIGH 0.5% exploit odds No fix listed
  7. CVE-2026-110339

    The Libreswan pluto daemon dereferences a NULL pointer when a CERT payload is received with an empty PKCS#7 payload, causing the daemon to crash and restart. The NSS function SEC_PKCS7GetCertificateList() was used to check whether the content was empty, but this check did not trigger if the non-empty content of the PKCS#7 wrapped payload was an empty list. Continued triggering of this vulnerability can lead to a denial of service. Remote code execution is not possible. Authentication is not required to trigger this vulnerability.

    Memory safety Network gear

    7.5 HIGH 0.4% exploit odds No fix listed
  8. CVE-2026-129217

    In FRRouting (FRR) 8.3 through 10.5.1, bgp_notify_decapsulate_hard_reset() in bgpd/bgp_packet.c does not validate the length of the data field of a received BGP NOTIFICATION Cease/Hard Reset message (RFC 8538). When the data field is exactly one byte long, the function reads one byte past the end of a heap buffer and the 16-bit length of the encapsulated data underflows to 65535, causing a 65535-byte out-of-bounds heap read followed by an assertion failure. A remote BGP peer that has established a session and negotiated the Graceful Restart capability with the Notification (N) bit can send such a message to crash the bgpd daemon, terminating all BGP sessions (denial of service). This is fixed in 10.0.5, 10.1.5, 10.2.6, 10.3.4, 10.4.3, 10.5.2 and 10.6.0.

    Memory safety Network gear

    6.0 MEDIUM 0.3% exploit odds Fix listed
  9. CVE-2026-111340

    Memory overflow in KBA (knowledge-based authentication) can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  10. CVE-2026-107407

    Memory overflow in SMPP traffic can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler

    Memory safety Network gear

    9.3 CRITICAL 0.3% exploit odds No fix listed
  11. CVE-2026-120867

    Memory overflow in SSL/TLS/DTLS can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  12. CVE-2026-120863

    Memory overflow in the management plane can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  13. CVE-2026-120861

    Memory overflow / improper handling in GSLB and geolocation (MEP, static-proximity, config-sync) can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  14. CVE-2026-120862

    Memory overflow in SIP ALG (LSN) and DNS answer-section logging datapaths can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  15. CVE-2026-107413

    Memory overflow in SAML authentication can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  16. CVE-2026-111342

    Memory overflow in LDAP authentication can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  17. CVE-2026-107414

    Memory overflow in WebAuth authentication can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  18. CVE-2026-129456

    In FRRouting, bgpd frees the sub-TLV chain of a Tunnel Encapsulation attribute (type 23) while routes stored by bgpd still point to it, if the attribute is received from a neighbor that has "soft-reconfiguration inbound" configured. A cache added to speed up attribute interning while processing the prefixes of an UPDATE checks whether an interned attribute set may be reused by comparing the parsed attributes with themselves, so the check always succeeds. Interning the parsed attributes for the Adj-RIB-In removes the Tunnel Encapsulation sub-TLVs from them, and the copy that bgpd then interns for the route reuses the cached attribute set, which still holds the sub-TLVs, without taking a reference on them. When the route is later replaced, withdrawn or cleared, for example when the session goes down, the sub-TLV chain is freed while still in use, and bgpd then reads it, decrements a reference count inside it and frees it a second time. In the reporter's build without AddressSanitizer this ended in an assertion failure in bgpd's memory accounting, aborting bgpd and dropping all BGP sessions on the router, and the neighbor can repeat it each time bgpd restarts. Because freed heap memory is written to and freed again, consequences beyond a crash cannot be ruled out. An established BGP session is required, and the attribute does not need to be malformed. bgpd processes attribute 23 from every neighbor, including eBGP neighbors, unless it is explicitly discarded, although RFC 9012 requires it to be filtered on eBGP sessions by default. Neighbors without "soft-reconfiguration inbound" are not affected.

    Memory safety Network gear

    7.7 HIGH 0.3% exploit odds Fix listed
  19. CVE-2026-120221

    In FRRouting, bgpd frees the same memory twice when dynamic BGP neighbors disconnect, if the peer-group used by a "bgp listen range" also has a Site-of-Origin configured ("neighbor PG soo"). Each dynamic neighbor shares the peer-group's SoO value instead of getting its own copy, but frees it as its own when the neighbor is deleted, which happens as soon as its connection closes. The first disconnect leaves the peer-group pointing at freed memory, and the second disconnect frees it again, causing bgpd to abort and drop all BGP sessions on the router. Any host whose address falls inside the listen range can trigger this by opening and closing two TCP connections to the BGP port, without sending any BGP message and without knowing the AS number, and can repeat it each time bgpd restarts. If the peer-group has a TCP-MD5 password, only hosts that know the password can trigger it. Two ordinary flaps of legitimate dynamic neighbors have the same effect. Between the two frees, displaying the configuration ("show running-config") or establishing a dynamic neighbor also reads the freed memory, which can crash bgpd after a single disconnect. Only configurations that combine a listen range with a SoO on the same peer-group are affected.

    Memory safety Network gear

    8.2 HIGH 0.3% exploit odds Fix listed
  20. CVE-2026-111337

    Memory overflow in Base64 decoding in advanced policy expressions leading to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  21. CVE-2026-107411

    Memory overflow in RTSP ALG can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  22. CVE-2026-120860

    Memory overflow in protocol load-balancing traffic handling (Diameter, SIP-over-TCP, MQTT, RADIUS) can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  23. CVE-2026-58498

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, there is a remote global-buffer-overflow in the official router-ipv6 application shipped with bacnet-stack, this results in an out-of-bounds write to the global transmit buffer under ASan. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Network gear

    8.6 HIGH 0.2% exploit odds Fix listed
  24. CVE-2026-127122

    P-Net before 1.0.4 does not check the number of MCR request blocks in a Connect request against the number of multicast communication relations that an Application Relationship has room for (PNET_MAX_MC_CR, 1 by default). Each further block is written past the end of the array, into the rest of the Application Relationship and, with more blocks, into the following one. The written data comes from the request. No established Application Relationship is needed, and the attacker requires ADJACENT network access. Builds with PNET_OPTION_MC_CR disabled are not affected.

    Memory safety Network gear

    7.2 HIGH 0.2% exploit odds No fix listed
  25. CVE-2026-111333

    Memory overflow in an authentication request can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    6.9 MEDIUM 0.1% exploit odds No fix listed
  26. CVE-2026-120866

    Memory overflow / improper handling in BGP dynamic routing can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    7.7 HIGH 0.1% exploit odds No fix listed
  27. CVE-2026-111339

    Memory overflow in Application Firewall data decompression/inspection can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear Citrix NetScaler ADC

    6.9 MEDIUM 0.1% exploit odds No fix listed
  28. CVE-2026-132142

    A flaw has been found in DrayTek Vigor2960 up to 1.5.1.6. This affects the function dataflowstatus of the file /cgi-bin/mainfunction.cgi of the component CGI Process. This manipulation of the argument option causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. Upgrading to version 1.5.1.7 is able to mitigate this issue. You should upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported."

    Memory safety Network gear DrayTek Vigor2960

    8.5 HIGH Fix listed
  29. CVE-2026-132141

    A vulnerability was detected in DrayTek Vigor2960 up to 1.5.1.6. Affected by this issue is the function json_load_lock of the file /cgi-bin/mainfunction.cgi of the component Jsonstatus. The manipulation of the argument usefile results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 1.5.1.7 can resolve this issue. It is advisable to upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported."

    Memory safety Network gear DrayTek Vigor2960

    8.6 HIGH Fix listed
  30. CVE-2026-76421

    A vulnerability in the LZX data algorithm for Microsoft Compiled HTML Help (CHM) file scanning in ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper boundary checks when applying the LZX data algorithm to CHM files during the decoder stage, which may result in buffer overflow. An attacker could exploit this vulnerability by sending a crafted CHM file for scanning. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.

    Memory safety Network gear Cisco Secure Endpoint

    7.5 HIGH No fix listed
  31. CVE-2026-76430

    A vulnerability in the Ultimate Packer for eXecutables (UPX) unpacker of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper length checks, when unpacking the UPX files, which may result in an out-of-bounds read of heap memory. An attacker could exploit this vulnerability by submitting a crafted UPX for decode. A successful exploit could allow the attacker to cause the ClamAV decode process to terminate, resulting in a DoS condition on the affected software.

    Memory safety Network gear Cisco Secure Endpoint

    7.5 HIGH No fix listed
  32. CVE-2026-76411

    A vulnerability in the phishcheck functionality of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper allocation of memory during processing of URLs. An attacker could exploit this vulnerability by sending a URL to be processed by the software. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.

    Memory safety Network gear Cisco Secure Endpoint

    7.5 HIGH No fix listed