CVE-20XX-?
agent?

The internet is broken right now.

67 critical CVEs without a fix in the last 48 hours. Developers are crying quietly into their IDEs. 149 more already have a fix that someone still has to apply.

42 CVEs · updated 2026-11-18 22:57 UTC

Reset all
  1. CVE-2026-113781

    ESP-IDF is the Espressif Internet of Things (IoT) Development Framework. Prior to 5.2.8, 5.3.6, 5.5.6, and 6.0.3, the Bluedroid BLE Mesh GATT server read handler bt_mesh_bta_gatts_cb in esp_ble_mesh stores a signed attribute-read callback length in an unsigned 16-bit variable. A negative ATT error code is therefore interpreted as a very large successful length and used for a memory copy from a small stack buffer into the GATT response structure. A remote attacker within Bluetooth LE range who can connect to an exposed PB-GATT provisioning or Mesh Proxy service can trigger a failed attribute read with a crafted request. On devices where the affected attributes are accessible without pairing, exploitation requires neither pairing nor user interaction; access requirements depend on device configuration. The resulting out-of-bounds read and stack-based buffer overflow corrupts the Bluetooth host task stack, causing a crash and device restart and potentially further memory corruption. The issue affects devices built with CONFIG_BT_BLUEDROID_ENABLED=y and BLE Mesh GATT enabled; the NimBLE host path is not affected. This issue is fixed in versions 5.2.8, 5.3.6, 5.5.6, and 6.0.3.

    Memory safety Device

    7.1 HIGH 0.7% exploit odds Fix listed
  2. CVE-2026-131849

    Snap7 through 1.4.3 contains a heap-based buffer overflow in TSnap7MicroClient::opReadSZL() that allows malicious PLCs to overwrite client memory by sending oversized multi-slice SZL responses. A rogue or impersonated PLC can keep flagging more data with attacker-controlled DLen slices, overflowing the 65536-byte opData buffer via Cli_ReadSZL() and Cli_ReadSZLList(), crashing the client and corrupting heap memory.

    Memory safety Device Davenardella snap7

    8.3 HIGH 0.6% exploit odds Fix listed
  3. CVE-2026-131848

    Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in TSnap7MicroClient::opReadMultiVars() that allows malicious PLCs to overflow client buffers via unchecked DataLength fields. Attackers controlling or impersonating a PLC can return crafted ReadVar responses to Cli_ReadMultiVars() callers, writing up to 65535 bytes per item to corrupt memory and crash clients.

    Memory safety Device Davenardella snap7

    8.3 HIGH 0.5% exploit odds No fix listed
  4. CVE-2026-97692

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.6, 1.5.2, and 1.6.1, the BACnet/SC message decoder walks the header-option list by following each option's MORE bit. Nothing rejects a list whose last option still has the MORE bit set, and the decode walk has no upper bound on how many options it processes. A single crafted BVLC-SC frame makes the walk advance one option past the end of the message and read message[message_len], one byte out of bounds. When the bytes after the message carry more MORE-set option markers, the walk keeps going: it runs past the fixed 4-entry option array and writes decoded option fields out of bounds. On the server that decode array is the static global bsc_dm, so the out-of-bounds write lands in adjacent BSS. Both faults are reachable before authentication, from the first frame a peer sends on a BACnet/SC connection, and the bytes that follow the message are the same peer's prior-frame data. This issue has been patched in versions 1.4.6, 1.5.2, 1.6.1, and 1.7.0.

    Memory safety Device

    7.7 HIGH 0.5% exploit odds Fix listed
  5. CVE-2026-64675

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5 and 1.5.1, a single unauthenticated BACnet/IP UDP datagram (port 47808) triggers an out-of-bounds read in xy_color_decode() (src/bacnet/lighting.c), reachable pre-authentication through two default-registered service handlers: the UnconfirmedRequest WriteGroup service (0x0A) and Confirmed WriteProperty on a BACnetXYColor-typed property. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    5.3 MEDIUM 0.5% exploit odds Fix listed
  6. CVE-2026-79614

    An out-of-bounds write vulnerability in “libclinkc.so” in Zyxel DX3301-T0/EX3301-T0 firmware versions through 5.50(ABVY.8.3)C0 could allow an unauthenticated attacker to elevate privileges and potentially execute arbitrary commands by sending a crafted HTTP request. WAN access is disabled by default on these devices.

    Memory safety Device Zyxel DX3301-T0 Firmware

    9.8 CRITICAL 0.4% exploit odds Fix listed
  7. CVE-2026-109445

    PLANET GS-5220-8P2T2S (hardware version 3.0) firmware versions before 3.2412b261008 contains a stack-based buffer overflow vulnerability that allows unauthenticated attackers to corrupt stack memory by submitting an oversized webstax_auth HTTP Cookie value that is copied into a fixed-size stack buffer without length validation. Attackers can send a crafted unauthenticated HTTP request with an oversized cookie to overwrite the saved return address and corrupt stack memory, leading to memory corruption and potential denial of service on the device.

    Memory safety Device PLANET Technology Corp. PLANET GS-5220-8P2T2S

    9.3 CRITICAL 0.4% exploit odds Fix listed
  8. CVE-2026-62973

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a remote out-of-bounds read exists in the official BACnet client application apps/readpropm in bacnet-stack commit e2bdbf6. When readpropm sends a legitimate ReadPropertyMultiple request to a malicious BACnet/IP peer, the peer can reply with a malformed but structurally valid ReadPropertyMultiple-ACK that drives the client into a global-buffer-overflow read on the global receive buffer Rx_Buf. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    7.5 HIGH 0.4% exploit odds Fix listed
  9. CVE-2026-52790

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, there is a library-level memory safety issue that is reachable from an unmodified official sample server (apps/server-basic/main.c) over BACnet/IP resulting in a stack-use-after-return in writable Device string properties. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    7.5 HIGH 0.4% exploit odds Fix listed
  10. CVE-2026-46674

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, an out-of-bounds read vulnerability exists in bacnet-stack's AtomicWriteFile record-access path. The bug is caused by a mismatch between an externally controlled returnedRecordCount field and the fixed-size internal fileData[] array used by BACNET_ATOMIC_WRITE_FILE_DATA. This issue has been patched in versions 1.4.4 and 1.5.1.

    Memory safety Device

    7.5 HIGH 0.4% exploit odds Fix listed
  11. CVE-2026-82414

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.0 to before 1.4.6, 1.5.0 to before 1.5.1, and 1.6.0 to before 1.6.1, the BACnet MS/TP receive path decodes COBS frames into an output pointer inside the same fixed input buffer, but passes the full input-buffer size as the decode capacity. A long valid COBS payload can therefore write past the end of the actual remaining buffer. This issue has been patched in versions 1.4.6, 1.5.1, 1.6.1, and 1.7.0.

    Memory safety Device

    8.8 HIGH 0.4% exploit odds Fix listed
  12. CVE-2026-74911

    Software installed and run as a non-privileged user may conduct improper GPU system calls to the execution of an error path that triggers an OOB read & write. An error can be triggered which causes the index of the array element to be cleaned up by the error path would be outside of the array bounds.

    Memory safety Device

    9.8 CRITICAL 0.4% exploit odds No fix listed
  13. CVE-2026-49990

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.2 to before 1.4.5, and 1.5.0 to before 1.5.1, a signed fileStartPosition taken from AtomicReadFile and AtomicWriteFile stream-access requests is not validated tightly enough before it reaches the RAM file backends. Practical impact includes: reliable denial of service via process crash, out-of-bounds read that may expose adjacent memory contents, or out-of-bounds write that may corrupt heap memory and destabilize the process. This issue has been patched in versions 1.4.5 and 1.5.1.

    Memory safety Device

    8.6 HIGH 0.3% exploit odds Fix listed
  14. CVE-2026-97357

    An Out-Of-Bounds Write due to missing input validation is possible in the autoprogramming interface of SpaceCom and Space Battery pack with WiFi which could lead to a denial of service of the affected communication device

    Memory safety Device

    6.9 MEDIUM 0.3% exploit odds No fix listed
  15. CVE-2026-52787

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0-rc2, a reachable out-of-bounds write exists when encoding the device.address-binding property. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0-rc2.

    Memory safety Device bacnet-stack

    7.5 HIGH 0.3% exploit odds Fix listed
  16. CVE-2026-62976

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, the RAMFS-backed FILE object implementation stores appended records as NUL-terminated strings, but its record-counting logic later walks the buffer as if an additional terminating empty record were present. As a result, two consecutive AtomicWriteFile(record-access) append requests can cause record_count() to call bacnet_strnlen() on a pointer that is already one byte past the end of the heap allocation. This issue has been patched in versions 1.5.1 and 1.6.0.

    Memory safety Device

    8.7 HIGH 0.3% exploit odds Fix listed
  17. CVE-2026-47711

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, the current master demo server can be crashed remotely over BACnet/IP by sending a valid Confirmed WriteProperty request that updates loop-1's controlled-variable-reference to point to life-safety-zone-1 / accepted-modes. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

    Memory safety Device

    8.6 HIGH 0.3% exploit odds Fix listed
  18. CVE-2026-62972

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, lighting_command_decode in src/bacnet/lighting.c decodes its first field with the bounded apdu_size - apdu_len, but every nested decode in the operation switch is called with the original full apdu_size while the read pointer has been advanced to &apdu[apdu_len]. The leaf decoders bound their reads against the size they are told, so they read up to apdu_len bytes past the end of the caller's buffer, resulting in an out-of-bounds read. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    6.9 MEDIUM 0.3% exploit odds Fix listed
  19. CVE-2026-52788

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, the bsc_node_parse_urls() function in src/bacnet/datalink/bsc/bsc-node.c contains three distinct bugs when parsing space-separated WebSocket URIs from a BACnet/SC Address Resolution ACK message. Two bugs cause out-of-bounds writes past the utf8_urls[10][129] array in the static BSC_ADDRESS_RESOLUTION structure. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    8.8 HIGH 0.3% exploit odds Fix listed
  20. CVE-2026-45341

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.0 to before 1.4.4, and 1.5.0 to before 1.5.1, a NULL pointer dereference can be triggered in bacnet_device_object_reference_decode() when a WriteProperty request updates OBJECT_STRUCTURED_VIEW / PROP_SUBORDINATE_LIST. This issue has been patched in versions 1.4.4 and 1.5.1.

    Memory safety Device

    7.5 HIGH 0.3% exploit odds Fix listed
  21. CVE-2026-58265

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a BACnet/SC peer can trigger a heap out-of-bounds read (up to 3 bytes), pre-authentication, in the BACnet/SC header-option decoder. bvlc_sc_decode_proprietary_option() reads the vendor-id and option-type at fixed offsets [3],[4],[5] before checking the option's declared header length, and the option-list validator never enforces a minimum length for proprietary options. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device bacnet-stack

    6.5 MEDIUM 0.3% exploit odds Fix listed
  22. CVE-2026-46676

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.0 to before 1.4.4, and 1.5.0 to before 1.5.1, an uninitialized value use vulnerability in bacnet-stack's AtomicReadFile record-access ACK encoder allows unauthenticated remote attackers to corrupt the encoded OCTET STRING length and payload boundary in network responses by sending a crafted AtomicReadFile request that reaches a successful record-access path. This issue has been patched in versions 1.4.4 and 1.5.1.

    Memory safety Device

    5.3 MEDIUM 0.3% exploit odds Fix listed
  23. CVE-2026-21155

    Out-of-bounds write in bootloader prior to SMR Nov-2026 Release 1 allows physical attackers to write out-of-bounds memory.

    Memory safety Device

    4.7 MEDIUM 0.3% exploit odds No fix listed
  24. CVE-2026-62975

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, the RAMFS-backed FILE implementation accepts AtomicWriteFile(record-access) requests that replace existing records with caller-controlled content. If a client replaces a record with shorter data, the backend can shrink the heap allocation and then continue processing with a trailing-copy length derived from the old layout. During that replace path, the RAMFS backend computes the trailing-copy length from the old file layout, then shrinks the heap allocation, and finally uses the stale length in memmove(). As a result, the source range of that memmove() can extend beyond the end of the reallocated heap buffer, producing a heap out-of-bounds read. This issue has been patched in versions 1.5.1 and 1.6.0.

    Memory safety Device bacnet-stack

    6.9 MEDIUM 0.3% exploit odds Fix listed
  25. CVE-2026-47258

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-based out-of-bounds write exists in the Notification Class object implementation when handling AddListElement for the recipient-list property. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

    Memory safety Device

    8.2 HIGH 0.3% exploit odds Fix listed
  26. CVE-2026-45265

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a stack-based out-of-bounds write / stack-buffer-overflow in bacnet-stack when the server processes a malicious Atomic-Read-File request in record access mode. The bug is triggered on the real server side. A crafted request can set an excessively large RecordCount, which is later used as the loop bound for writing record data into a stack-allocated BACNET_ATOMIC_READ_FILE_DATA data structure. However, the stack object only has space for one fileData element. When the loop reaches i = 1, the code computes &data->fileData[1], which is already out of bounds, and the resulting invalid pointer is passed down to memmove(), causing a stack-buffer-overflow. This issue has been patched in versions 1.4.4 and 1.5.1.

    Memory safety Device

    8.2 HIGH 0.3% exploit odds Fix listed
  27. CVE-2026-47259

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a RemoveListElement request targeting Notification-Class.recipient-list can trigger a stack-based out-of-bounds write in the current master branch when the request contains more than NC_MAX_RECIPIENTS valid BACnetDestination elements. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

    Memory safety Device

    8.2 HIGH 0.3% exploit odds Fix listed
  28. CVE-2026-47710

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-buffer-overflow can be triggered in the current master branch when a Loop object reads a referenced property through its default timer path and the referenced property is OBJECT_STRUCTURED_VIEW / PROP_DESCRIPTION containing a long attacker-controlled string. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

    Memory safety Device

    8.2 HIGH 0.3% exploit odds Fix listed
  29. CVE-2026-52786

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, in the official apps/epics client tool on v1.6.0-rc1 (not in the generic BACnet RPM ACK decoder alone) a malicious BACnet/IP endpoint can reply to the EPICS tool’s legitimate ReadPropertyMultiple request with a syntactically valid ReadPropertyMultiple-ACK that contains more heading properties than the tool’s fixed local storage can hold. The response is decoded successfully and later consumed by ProcessRPMData(), which writes property values into a fixed global array using an unbounded linear index. This results in a reproducible global-buffer-overflow in apps/epics/main.c. This is a network-reachable memory corruption in the official epics tool’s response-processing path. The root cause is that apps/epics treats a remotely supplied variable-length RPM property list as if it were a trusted, fixed-size local heading-property set. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    7.1 HIGH 0.2% exploit odds Fix listed
  30. CVE-2026-46677

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a client-side out-of-bounds read in the AtomicReadFile-ACK record-access handling path. The issue is caused by a mismatch between a remote returnedRecordCount value and the fixed local fileData[] array capacity in BACNET_ATOMIC_READ_FILE_DATA. The ACK decode path preserves the remote RecordCount, discards storage for excess records without truncating that count, and a downstream sink later iterates over the original RecordCount and indexes fileData[i] out of bounds. This issue has been patched in versions 1.4.4 and 1.5.1.

    Memory safety Device

    6.5 MEDIUM 0.2% exploit odds Fix listed
  31. CVE-2026-21162

    Out-of-bounds write in libiosotglib.so prior to version 3.7.73.4 allows physical attackers to execute arbitrary code. User interaction is required for triggering this vulnerability.

    Memory safety Device

    5.2 MEDIUM 0.2% exploit odds No fix listed
  32. CVE-2026-85647

    A maliciously crafted DWG file containing a malformed embedded image, when parsed through Autodesk AutoCAD, can force a Heap-Based Buffer Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash or execute arbitrary code in the context of the current process.

    Memory safety Device Autodesk AutoCAD

    7.8 HIGH 0.2% exploit odds Fix listed
  33. CVE-2026-93672

    bt_att_find_req_by_user_data() in subsys/bluetooth/host/att.c walks every ATT channel attached to a connection and dereferences chan->req->user_data without checking chan->req. An ATT channel with no client request in flight holds chan->req == NULL — that is its normal idle state, set by att_handle_rsp() when a response resolves the transaction and tested by att_req_send_process() to pick a free channel — so the lookup reads through a NULL pointer as soon as it visits an idle channel. Every other chan->req user in the file already guards the pointer. The lookup is reached from the public bt_gatt_cancel() API and, more importantly, from the host itself: bt_gatt_unsubscribe() calls bt_gatt_cancel() while a subscribe CCC write is still outstanding (BT_GATT_SUBSCRIBE_FLAG_WRITE_PENDING), and call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c invokes bt_gatt_unsubscribe() from the RX path whenever an application notify callback returns BT_GATT_ITER_STOP. A malicious or malfunctioning peer can hold the trigger window open by withholding the ATT Write Response to the CCC write and then sending a notification for the subscribed handle. With CONFIG_BT_EATT the traversal is very likely to meet an idle sibling channel, since ATT channels are prepended to the list and a channel opened after the pending request was sent is visited first. The dereference is a read of a small constant offset from address zero, so the impact is availability only: no memory corruption, no attacker-chosen address and no information disclosure. On platforms and configurations where a near-NULL read traps — TrustZone non-secure images, MMU targets, native_sim, or builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU/_DWT — the fault occurs in the Bluetooth RX context and results in a fatal error and device reset. On a plain Cortex-M build with the vector table mapped at address 0 and null-pointer detection disabled (the default) the read succeeds and the defect is inert. The fix adds an explicit chan->req != NULL test to the channel traversal and additionally rejects a NULL user_data argument, which would otherwise have matched, and cancelled, an unrelated request.

    Memory safety Device

    5.3 MEDIUM 0.2% exploit odds Fix listed
  34. CVE-2026-127915

    The MCUboot TLV iterator bootutil_tlv_iter_next() in boot/bootutil/src/tlv.c walks image trailer TLVs with a single loop guard (it->tlv_off < it->tlv_end) and advances by sizeof(struct image_tlv) + tlv.it_len using the attacker-controlled it_len field, without validating that the entry's header or payload stays within it->tlv_end. As a result the 4-byte header read can extend up to 3 bytes past the declared TLV area, and the returned (off, len) can describe a payload that runs past it. The path is pre-authentication: TLVs are parsed during bootutil_img_validate() before the signature is verified, and a crafted image can be presented through DFU / serial-recovery / OTA. However the impact is contained by surrounding guards: bootutil_img_validate() first rejects a TLV area larger than bootutil_max_image_size(), the default LOAD_IMAGE_DATA sink is flash_area_read() which bounds-checks against the flash partition and fails an out-of-partition read, and every payload consumer (EXPECTED_HASH_TLV, EXPECTED_KEY_TLV, EXPECTED_SIG_TLV, IMAGE_TLV_SEC_CNT) clamps len against a fixed buffer before copying. The residual effect in a default flash build is therefore an out-of-region read confined to the attacker's own slot partition whose result is never observable, yielding at worst a clean validation failure rather than memory corruption or information disclosure. A genuine (though still bounded) out-of-bounds read remains under the non-default MCUBOOT_RAM_LOAD configuration, where LOAD_IMAGE_DATA is an unchecked memcpy. The fix is to validate each entry's header and payload against it->tlv_end inside the iterator.

    Memory safety Device

    2.0 LOW 0.1% exploit odds Fix listed
  35. CVE-2026-21153

    Stack-based buffer overflow in libsecuibc.so prior to SMR Nov-2026 Release 1 allows local attackers to execute arbitrary code.

    Memory safety Device

    7.4 HIGH 0.1% exploit odds No fix listed
  36. CVE-2026-0455

    The Versal™ AI Edge Series Gen 2 Peripheral Protection Unit (XPPU) for the inter-processor interrupt (IPI) buffers does not block unauthorized access as expected. This allows processors in the SoC with any IPI channel access the ability to both read and write to the entire IPI buffer register space as well as the IPI no-buffer register control space.

    Memory safety Device

    5.9 MEDIUM 0.1% exploit odds No fix listed
  37. CVE-2026-129606

    Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Samsung Open Source mTower allows Overflow Buffers.

    Memory safety Device

    7.1 HIGH 0.1% exploit odds Fix listed
  38. CVE-2026-16664

    MCUboot's Zephyr serial-recovery upload handler bs_upload() in boot/boot_serial/src/boot_serial.c decodes the host-supplied image field of an MCUmgr image-upload request into img_num (a full 32-bit value) and latches it on the off == 0 packet without any range check. It then passes img_num straight to flash_area_id_from_multi_image_slot(img_num, 0), which on the Zephyr port resolves to __flash_area_ids_for_slot() in boot/zephyr/include/sysflash/sysflash.h and indexes the static const int all_slots[] table as all_slots[img_num 2]. That table holds only MCUBOOT_IMAGE_NUMBER 2 entries, so any img_num >= MCUBOOT_IMAGE_NUMBER is an out-of-bounds read. The path is reachable by anyone with access to the serial / SMP recovery console, which is unauthenticated by design, and the bad value is supplied before any image signature is verified. The defect is specific to the default non-direct upload path (MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD disabled) on the Zephyr port with the array-backed slot layout (not CONFIG_SINGLE_APPLICATION_SLOT). It is not gated on a multi-image configuration: MCUBOOT_IMAGE_NUMBER defaults to 1, so even a default single-image build is affected for any image >= 1. The MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD path is safe (its flash_area_id_from_direct_image() switch returns -EINVAL for unknown indices). flash_area_id_from_multi_image_slot() takes a signed int image_index while img_num is uint32_t, so the attacker controls the sign of the index as well as its magnitude: an image of 0xFFFFFFFE converts to -2 and reads all_slots[-4], off the front of the table, while large positive values read off the end (CWE-192). (0xFFFFFFFF itself is the "no image given" sentinel and selects image 0.) Either way the index multiply img * 2 is performed in int, so a wild offset yields a bus/hard fault, giving a reliable denial of service of the bootloader during recovery. For moderately out-of-range indices the read returns adjacent .rodata as a garbage flash-area id that is handed to flash_area_open(); this normally fails with MGMT_ERR_EINVAL, but if the garbage id happens to match a valid non-image partition, the subsequent erase/write can target a partition outside the image set (CWE-787). The attacker-supplied value is never echoed back, so there is no information disclosure. The fix is to reject img_num >= BOOT_IMAGE_NUMBER on the off == 0 packet, before the slot lookup. The comparison must be made on the unsigned img_num: an equivalent guard applied after the conversion to int would not reject the negative case above. __flash_area_ids_for_slot() should bounds-check its own arguments as defence in depth. This vulnerability was reported independently twice: by NVIDIA Project Vanessa on 2026-06-22, and by Kai Phan (@kaimandalic) on 2026-07-19 as GHSA-8v33-88p6-jffj, which is closed as a duplicate of this advisory. Both original reports are reproduced in full below.

    Memory safety Device

    5.1 MEDIUM 0.1% exploit odds Fix listed
  39. CVE-2026-15465

    Software installed and run as a non-privileged user may conduct improper GPU system calls through the DDK kernel module interface. Under unsupported use of the interface, a use-after-free condition may occur that can lead to kernel memory corruption, platform instability, or system reboot. The weakness occurs when software references memory after it has been released. Accessing memory after free may result in corruption of valid data structures, unexpected program behaviour, process crashes, or execution of unintended operations.

    Memory safety Device

    7.8 HIGH 0.1% exploit odds No fix listed
  40. CVE-2026-21156

    Out-of-bounds write in libsmkvextractor.so prior to SMR Nov-2026 Release 1 allows local attackers to write out-of-bounds memory.

    Memory safety Device

    6.9 MEDIUM 0.1% exploit odds No fix listed
  41. CVE-2026-127916

    bootutil_img_hash() computes the image digest over ih_hdr_size + ih_img_size + ih_protect_tlv_size bytes, all three taken from the candidate image's header, and reads that span out of the slot without checking that it fits in the flash area. The three sizes are also summed without an overflow check. Nothing earlier on the validation path bounds the whole span either: bootutil_img_validate() compares the image size against bootutil_max_image_size() only after the hash has been computed. The callers bound part of the span, or none of it: On the swap and overwrite upgrade path, boot_validate_slot() first runs the image header check (boot_is_header_valid(), later boot_check_header_valid()). Before MCUboot 2.2.0 that check covered only ih_hdr_size + ih_img_size, so for every image the protected-TLV area (ih_protect_tlv_size, a uint16_t, up to 65535 bytes) was hashed without being bounded. From 2.2.0 the check includes ih_protect_tlv_size, except for a compressed image in the secondary slot when MCUBOOT_DECOMPRESS_IMAGES (CONFIG_BOOT_DECOMPRESSION) is enabled, which leaves the same gap of up to 64 KB. Zephyr's single-slot and firmware loaders (boot/zephyr/single_loader.c, boot/zephyr/firmware_loader.c) read the header with boot_image_load_header(), which bounds ih_hdr_size + ih_img_size against the flash area. Before MCUboot 2.4.0 that bound did not include ih_protect_tlv_size, which leaves the same gap of up to 64 KB. From 2.4.0 these loaders bound the whole span. The serial recovery image-list and image-state handlers (bs_list() and bs_set() in boot/boot_serial/src/boot_serial.c) call bootutil_img_validate() with no header check at all, so on those paths ih_img_size is unbounded as well. The image is hashed before its signature is checked, so anyone who can place an image in a slot (an OTA or SMP update delivered through the application, or serial recovery) reaches this read before authentication. Whether a malformed header produces an actual read beyond the area depends on the flash backend: Backends whose flash_area_read() bounds-checks the request (Zephyr, Espressif, NuttX, Mbed) return an error once the chunked read crosses the end of the area. Validation fails and the image is rejected, with no over-read. With MCUBOOT_HASH_STORAGE_DIRECTLY (Zephyr CONFIG_BOOT_IMG_HASH_DIRECTLY_ON_STORAGE, available from 2.2.0, not enabled by default) the span is hashed through a single direct pointer into memory-mapped flash, with no bounds check. The Cypress PSoC6 port's flash_area_read() (boot/cypress/cy_flash_pal/cy_flash_map.c, from 1.6.0) does not bound the read: its assert()s compare against the area's absolute offset rather than its size, and it copies with memcpy(). The bytes read past the area feed only the digest, which is compared internally and never returned, so nothing is disclosed. The realistic effect is a read fault during image validation: up to 64 KB past the slot on the upgrade path and, before 2.4.0, on the Zephyr loaders, and potentially much further on the serial recovery handlers, which skip the header check. Where validation is repeated at every boot (a pending upgrade, or, before 2.4.0, the single-slot loader checking its image), the fault can recur on each reset and keep the device from booting. The fix makes bootutil_img_hash() add the three sizes with boot_u32_safe_add() and reject an image whose span, including the sector offset used in swap-using-offset mode, does not fit in the flash area, before any of it is hashed. Because the bound is applied where the bytes are read, it covers every caller.

    Memory safety Device

    2.9 LOW 0.1% exploit odds Fix listed
  42. CVE-2026-16659

    MCUboot's serial-recovery image-upload handler bs_upload() in boot/boot_serial/src/boot_serial.c declares const struct flash_area *fap = NULL and assigns it only via flash_area_open() part-way through the function. Two early validation failures (goto out_invalid_data) — a CBOR map that fails to decode, or an upload packet missing the off/data members — branch past the open while fap is still NULL, then fall into the shared epilogue. In MCUBOOT_ENC_IMAGES builds that epilogue unconditionally calls boot_handle_enc_fw(fap), which reaches boot_image_load_header() and flash_area_read() and dereferences the NULL flash_area. The defect is reachable pre-authentication: the trigger is the very first serial-recovery upload command carrying a malformed payload. The guarding conditions are default-true on a fresh recovery session — img_num, curr_off and img_size are zero-initialized statics, so curr_off == img_size and the primary-slot test both hold. It requires a non-default build: encrypted images (MCUBOOT_ENC_IMAGES / Zephyr CONFIG_BOOT_ENCRYPT_IMAGE) together with an active serial-recovery transport, on the Zephyr or Mynewt port (the two that build both boot/boot_serial/src/boot_serial.c and boot_serial_encryption.c with MCUBOOT_ENC_IMAGES). The impact is a transient denial of service of the bootloader during recovery. fap is a hard NULL rather than an attacker-controlled value, so there is no memory-corruption or information-leak primitive and image authentication is unaffected. Whether the dereference faults is platform-dependent — on targets where address 0x0 is mapped readable flash the read merely returns an error and execution continues, while targets that trap NULL (MPU / null-pointer-exception detection) take a hard fault. Because serial recovery is unauthenticated by design and already permits the console attacker to write the secondary slot, the added capability is only a low-value transient crash. The related unconditional flash_area_close(fap) call in the same epilogue is a safe no-op on the ports that reach it, so it does not contribute to the dereference. The affected ports are the Zephyr port — boot/zephyr/CMakeLists.txt compiles boot_serial.c under CONFIG_MCUBOOT_SERIAL and boot_serial_encryption.c under CONFIG_BOOT_ENCRYPT_IMAGE — and the Mynewt port, whose mcuboot_config.h defines MCUBOOT_SERIAL unconditionally and MCUBOOT_ENC_IMAGES under any BOOTUTIL_ENCRYPT_ syscfg, with boot/boot_serial/pkg.yml declaring no explicit source list so the whole directory is built. The Espressif port is not affected**: it compiles boot_serial.c but not boot_serial_encryption.c, and defines no MCUBOOT_ENC_IMAGES, so the #ifdef MCUBOOT_ENC_IMAGES block containing the call is preprocessed away. The NuttX, Cypress and Mbed ports do not build boot_serial.c at all.

    Memory safety Device

    4.0 MEDIUM 0.1% exploit odds Fix listed