The internet is broken right now.
67 critical CVEs without a fix in the last 48 hours. Somewhere a staging server is public. It always is. 150 more already have a fix that someone still has to apply.
-
CVE-2026-118527
Use of predictable filenames in Ivanti Connect Secure before versions 25.1.1.3 and 22.8R2.6 allows a remote authenticated attacker to upload files with attacker-controlled content to a known location on disk.
-
CVE-2026-126255
A path traversal: '../filedir' vulnerability in Fortinet FortiOS 8.0.0 through 8.0.1, FortiOS 7.6.0 through 7.6.7, FortiOS 7.4.0 through 7.4.12, FortiOS 7.2.0 through 7.2.13, FortiPAM 1.6 all versions, FortiPAM 1.5 all versions, FortiPAM 1.4 all versions, FortiPAM 1.3 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions may allow an unauthenticated attacker to bypass authentication via specially crafted credentials.
-
CVE-2026-121618
A weakness has been identified in Linksys E5600 1.1.0.26. This affects an unknown part of the file /cgi-bin/fqc.cgi of the component Factory Quality Control. This manipulation causes information disclosure. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-123181
A path traversal vulnerability in Ivanti Sentry before versions 11.0, 10.8.3, and 10.7.4 allows a remote authenticated attacker with administrative privileges to create arbitrary directories and files with root privileges.
-
CVE-2025-61625
An improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.4, FortiAnalyzer 7.4.0 through 7.4.7, FortiAnalyzer 7.2.0 through 7.2.11, FortiManager 7.6.0 through 7.6.4, FortiManager 7.4.0 through 7.4.7, FortiManager 7.2.0 through 7.2.11, FortiManager Cloud 7.6.0 through 7.6.4, FortiManager Cloud 7.4.1 through 7.4.7, FortiManager Cloud 7.2.1 through 7.2.10 may allow an authenticated attacker whose profile only has read permission to write and delete files from the underlying filesystem via crafted HTTP or HTTPs requests.
-
CVE-2026-121371
On affected EOS versions with the eAPI service enabled, a specially crafted HTTP request can allow an unauthenticated, remote attacker to read arbitrary files, including sensitive credentials from the switch filesystem.
-
CVE-2026-124564
A weakness has been identified in D-Link DIR-878 1.20B05. Affected by this issue is the function GetListDirectory of the file bin/prog.cgi of the component HNAP Handler. This manipulation of the argument ListDirectoryPath causes path traversal. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-126222
A improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.3 through 7.6.7, FortiAnalyzer Cloud 8.0.0 through 8.0.1, FortiAnalyzer Cloud 7.6.3 through 7.6.7, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.3 through 7.6.7, FortiManager Cloud 8.0.0 through 8.0.1, FortiManager Cloud 7.6.3 through 7.6.7 may allow an authenticated attacker with admin privileges to execute unauthorized code or commands via crafted requests.
-
CVE-2026-126235
A improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.2 through 7.6.7, FortiAnalyzer 7.4.7 through 7.4.11, FortiAnalyzer 7.2.10 through 7.2.12, FortiAnalyzer Cloud 8.0.0 through 8.0.1, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiAnalyzer Cloud 7.2.1 through 7.2.12, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.2 through 7.6.7, FortiManager 7.4.7 through 7.4.11, FortiManager 7.2.10 through 7.2.12, FortiManager Cloud 8.0.0 through 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11, FortiManager Cloud 7.2.1 through 7.2.12 may allow an authenticated administrator to write arbitrary files via a specially crafted archive.
-
CVE-2026-126219
A improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiAnalyzer 8.0.0, FortiAnalyzer 7.6.0 through 7.6.7, FortiAnalyzer 7.4.0 through 7.4.11, FortiAnalyzer Cloud 8.0.0, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiManager 8.0.0, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager Cloud 8.0.0, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11 may allow an authenticated administrator to read or write arbitrary files or execute unauthorized code or commands via specially crafted requests to the GUI.
-
CVE-2026-0331
An information disclosure vulnerability in Palo Alto Networks PAN-OS® software enables an unauthenticated remote attacker with network access to obtain sensitive firewall and session information by sending traffic to or through a dataplane interface. Panorama is not affected by this vulnerability.
-
CVE-2026-129450
A vulnerability was detected in DrayTek Vigor2960 1.5.1.6. Affected by this issue is the function sub_1E084 of the file /cgi-bin/mainfunction.cgi?action=doWebBackup. The manipulation of the argument option results in path traversal. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 1.5.1.7 can resolve this issue. You should upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported."
-
CVE-2026-109593
An unauthenticated attacker with network access to the SonicWall GMS 9.5.2 and earlier versions may be able to read internal GMS files, potentially exposing sensitive information.
-
CVE-2026-93458
Insertion of sensitive information into sent data in certain ASUS Router firmware allows a remote attacker to obtain router’s UID or login authorization tokens for the victim's linked account via a crafted web page, which requires a logged-in router administrator to actively complete the third-party authorization flow. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-76531
As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76531 are related to files or directories accessible to external parties and are grouped under the Common Weakness Enumeration (CWE) CWE-552.
-
CVE-2026-113395
A security flaw has been discovered in DrayTek Vigor2960 1.5.1.6 Revision 8218. The affected element is the function cgiEscape of the file /cgi-bin/mainfunction.cgi of the component swmconfigupload. The manipulation of the argument multipart results in path traversal. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.5.1.7 is sufficient to fix this issue. The affected component should be upgraded. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-113392
A vulnerability was found in DrayTek Vigor2960 1.5.1.6 Revision 8218. This vulnerability affects unknown code of the file /cgi-bin/mainfunction.cgi of the component Apmupload. Performing a manipulation of the argument action results in path traversal. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Upgrading to version 1.5.1.7 is able to resolve this issue. Upgrading the affected component is advised. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-76529
As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76529 are related to improper protection of alternate path and are grouped under the Common Weakness Enumeration (CWE) CWE-424.
-
CVE-2026-113394
A vulnerability was identified in DrayTek Vigor2960 1.5.1.6 Revision 8218. Impacted is the function setSWMProfile of the file /cgi-bin/mainfunction.cgi. The manipulation of the argument setSWMProfile leads to path traversal. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-126210
@hono/node-server allows running the Hono application on Node.js. Prior to 1.19.18 and from 2.0.0 until 2.1.6, the server passes a raw request-target containing a backslash in its path to the WHATWG URL parser, which treats the backslash as a path separator and resolves dot segments. A reverse proxy, load balancer, or web application firewall that preserves the backslash and applies path-based rules to the original request can therefore permit a request that the application normalizes to a blocked route. This lets an unauthenticated client reach route content that the upstream component was intended to deny, while Hono application access controls are unaffected because they operate on the normalized path. This issue is fixed in versions 1.19.18 and 2.1.6.
-
CVE-2026-95729
A sensitive information disclosure vulnerability exists in HPE Networking VIA. Successful exploitation could allow an authenticated attacker to obtain sensitive information.
-
CVE-2026-109822
Yamaha wireless LAN router NWR100 provided by Yamaha Corporation contains an issue with insecure storage of sensitive information. Configuration files generated by the CONFIG file export function may be read by an unauthenticated attacker.
-
CVE-2026-19399
Improper Authentication and Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') in ASUS Router firmware allow an unauthenticated nearby user to perform file operations or read files in an unintended directory via crafted HTTP requests during an active user session. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-125115
Novu provides an API for sending notifications through multiple channels. Prior to 3.17.0, validateUrlSsrf in libs/application-generic/src/utils/ssrf-url-validation.ts uses the isPrivateIp deny-list without covering the RFC6598 100.64.0.0/10 shared address space or its IPv4-mapped IPv6 forms. The workflow HTTP request step and webhook filter condition can therefore send server-side requests when a configured literal address or resolved hostname falls in that range. In Alibaba Cloud, 100.100.100.200 may expose instance metadata, while self-hosted and multi-tenant deployments may expose provider-internal services, private infrastructure, service meshes, or VPN resources reachable through CGNAT addressing. This issue is fixed in version 3.17.0.
-
CVE-2026-95379
Path traversal in the certificate.deleteCertificate JSON-RPC method (POST /api/rpc) of the turbineweb web interface in Zenitel VSFF6, VSFF8, VSFF8MP, VSFF8MN, and VSFT devices with software versions from 10.0.3.0 before 10.1.3.0 allows authenticated administrators to delete arbitrary files as root via a relative path (../) in the file_name parameter. This can be used to cause denial of service or render the device inoperable by removing critical system files, and to weaken device security by removing files such as firewall rules or certificate trust stores.
-
CVE-2026-121967
Coder 2.28.0 before 2.29.22, 2.30.0 before 2.34.13, 2.35.0 before 2.35.10, 2.36.0 before 2.36.8, 2.37.0 before 2.37.5, and 2.38.0 before 2.38.1 contains a path traversal vulnerability in the AI Gateway passthrough router, which forwards percent-encoded dot segments upstream without rejecting them. Authenticated users can send paths such as %2e%2e or ..%2F under allowlisted prefixes to reach unintended provider endpoints using the deployment's centrally managed provider key.
-
CVE-2026-79876
A sensitive information disclosure vulnerability in the Wi-Fi frame processing of AOS-10 could allow an unauthenticated adjacent attacker to access sensitive information. Successful exploitation could allow an attacker to retrieve information which could be used to potentially gain further access to network services supported by AOS-10, or to interrupt the normal operation of the affected service.
-
CVE-2026-103407
An Improper Limitation of a Pathname to a Restricted Directory vulnerability in ConfigDirector in Juniper Networks Session Smart Router and Session Smart Conductor allows an authenticated REST user to read, overwrite, or delete arbitrary certificate and key files on the host filesystem via the certificate and private-key REST API.
-
CVE-2026-95774
A sensitive information disclosure vulnerability exists in HPE Networking Fabric Composer. Successful exploitation could allow an unauthenticated remote attacker to obtain sensitive information from the affected system.
-
CVE-2026-95766
Sensitive information disclosure vulnerabilities in HPE Networking Fabric Composer could allow an authenticated attacker with low privileges to access sensitive information. Successful exploitation could allow an attacker to disclose sensitive information.
-
CVE-2026-103411
An Integer Underflow vulnerability in DhcpMessageDecoder in Juniper Networks Session Smart Router allows an attacker with local network access to cause information disclosure and a denial of service via a malicious DHCP reply.
-
CVE-2026-95744
A sensitive information disclosure vulnerability in the affected interface of HPE Networking Fabric Composer could allow an authenticated low-privileged attacker to access sensitive information, if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to intercept protected network traffic.
-
CVE-2026-108018
The BigFix MCM admin portal is directly accessible from the internet without VPN or network restriction. A client-side configuration file discloses non-sensitive environment details. Exposing the configuration file publicly increases the attack surface and the risk of unauthorized access attempts.
-
CVE-2026-100420
A sensitive information disclosure vulnerability in the cloud-client daemon of Deco BE63 allows authenticated attackers to retrieve the plaintext TP-Link ID account password. Successful exploitation may allow attackers to compromise the associated cloud account and perform unauthorized actions on behalf of the affected user.
-
CVE-2026-0323
A server-side request forgery vulnerability in Palo Alto Networks Checkov by Prisma® Cloud enables a local unauthenticated user to make unauthorized network requests from host to internal services.
-
CVE-2026-120976
On affected platforms running Arista EOS with IEEE 802.1X authentication and MACsec using dynamically derived keys, sensitive authentication information may be recorded in diagnostic data during a Smart Switch Upgrade (SSU). An attacker with administrative access on the device who obtains the affected diagnostic data could recover sensitive authentication information. This could potentially compromise the confidentiality and integrity of traffic protected by MACsec on the affected link. The vulnerability is only exposed during and after an SSU reload where an active 802.1X session used for MACsec is present.
-
CVE-2026-111338
Sensitive authentication material written to a log file in Citrix NetScaler ADC and Citrix NetScaler Gateway.
-
CVE-2026-93864
A link following vulnerability in WatchGuard Fireware OS’s firewall daemon allows a local attacker with code execution as a low-privileged system process to overwrite arbitrary files with root privileges, and to tamper with firewall IP set data, by planting a crafted file system object and triggering a list update. Written content is partially constrained.
-
CVE-2026-112117
A Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') in ASUS System Control Interface , allows a local, low-privileged user to gain full control over arbitrary existing files and folders outside the allowed directories via a crafted path containing dot-segment sequences that satisfies a folder prefix check, which can lead to unauthorized read and modification of protected files and may result in local privilege escalation. Refer to the ' Security Update for ASUS System Control Interface ' section on the ASUS Security Advisory for more information.
-
CVE-2026-105813
Cleartext storage of sensitive information in Ivanti UWM before version 2026.4 allows a local authenticated attacker to retrieve another local user's session token.
-
CVE-2026-101181
Permission control vulnerability in the WLAN module. Impact: Successful exploitation of this vulnerability may affect service confidentiality.